May 2025 - Linux-stable-mirror

[PATCH] mtd: nand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk

by Wentao Liang

The function sunxi_nfc_hw_ecc_write_chunk() calls the sunxi_nfc_hw_ecc_write_chunk(), but does not call the configuration function sunxi_nfc_randomizer_config(). Consequently, the randomization might not conduct correctly, which will affect the lifespan of NAND flash. A proper implementation can be found in sunxi_nfc_hw_ecc_write_page_dma(). Add the sunxi_nfc_randomizer_config() to config randomizer. Fixes: 4be4e03efc7f ("mtd: nand: sunxi: add randomizer support") Cc: stable(a)vger.kernel.org # v4.6 Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/mtd/nand/raw/sunxi_nand.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c index 9179719f639e..162cd5f4f234 100644 --- a/drivers/mtd/nand/raw/sunxi_nand.c +++ b/drivers/mtd/nand/raw/sunxi_nand.c @@ -1050,6 +1050,7 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct nand_chip *nand, if (ret) return ret; + sunxi_nfc_randomizer_config(nand, page, false); sunxi_nfc_randomizer_enable(nand); sunxi_nfc_hw_ecc_set_prot_oob_bytes(nand, oob, 0, bbm, page); -- 2.42.0.windows.2

1 month, 1 week

2
2
0 0

[PATCH] bus: fsl-mc: Fix an API misuse in fsl_mc_device_add()

by Haoxiang Li

In fsl_mc_device_add(), use put_device() to give up the device reference instead of kfree(). Fixes: bbf9d17d9875 ("staging: fsl-mc: Freescale Management Complex (fsl-mc) bus driver") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- drivers/bus/fsl-mc/fsl-mc-bus.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c b/drivers/bus/fsl-mc/fsl-mc-bus.c index a8be8cf246fb..dfd79ecf65b6 100644 --- a/drivers/bus/fsl-mc/fsl-mc-bus.c +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c @@ -905,9 +905,7 @@ int fsl_mc_device_add(struct fsl_mc_obj_desc *obj_desc, return 0; error_cleanup_dev: - kfree(mc_dev->regions); - kfree(mc_bus); - kfree(mc_dev); + put_device(&mc_dev->dev); return error; } -- 2.25.1

1 month, 1 week

2
1
0 0

[PATCH] mac80211: Add null pointer check for ieee80211_link_get_chanctx()

by Wentao Liang

The function ieee80211_chsw_switch_vifs() calls the function ieee80211_link_get_chanctx(), but does not check its return value. The return value is a null pointer if the ieee80211_link_get_chanctx() fails. This will lead to a null pointer dereference in the following code "&old_ctx->conf". A proper implementation can be found in ieee80211_link_use_reserved_assign(). Add a null pointer check and goto error handling path if the function fails. Fixes: 5d52ee811019 ("mac80211: allow reservation of a running chanctx") Cc: stable(a)vger.kernel.org # v3.16 Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- net/mac80211/chan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index a442cb667520..9e6235001e0a 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -1503,6 +1503,10 @@ static int ieee80211_chsw_switch_vifs(struct ieee80211_local *local, continue; old_ctx = ieee80211_link_get_chanctx(link); + if (WARN_ON(old_ctx)) { + err = -EINVAL; + goto out; + } vif_chsw[i].vif = &link->sdata->vif; vif_chsw[i].old_ctx = &old_ctx->conf; vif_chsw[i].new_ctx = &ctx->conf; -- 2.42.0.windows.2

1 month, 1 week

2
1
0 0

IPC drop down on AMD epyc 7702P

by Jean-Baptiste Roquefere

Hi, We (Ateme, a video encoding company) may have found an unwanted behavior in the scheduler since 5.10 (commit 16b0a7a1a0af), then 5.16 (commit c5b0a7eefc70), then 5.19 (commit not found yet), then maybe some other commits from 5.19 to 6.12, with a consequence of IPC decrease. Problem still appears on lasts 6.12, 6.13 and 6.14 We have reverted both 16b0a7a1a0af and c5b0a7eefc70 commits that reduce our performances (see fair.patch attached, applicable on 6.12.17). Performances increase but still doesnt reach our reference on 5.4.152. Instead of trying to find every single commits from 5.18 to 6.12 that could decrease our performance, I chosed to bench 5.4.152 versus 6.12.17 with and without fair.patch. The problem appeared clear : a lot of CPU migrations go out of CCX, then L3 miss, then IPC decrease. Context of our bench: video decoder which work at a regulated speed, 1 process, 21 main threads, everyone of them creates 10 threads, 8 of them have a fine granularity, meaning they go to sleep quite often, giving the scheduler a lot of opportunities to act). Hardware is an AMD Epyc 7702P, 128 cores, grouped by shared LLC 4 cores +4 hyperthreaded cores. NUMA topology is set by the BIOS to 1 node per socket. Every pthread are created with default attributes. I use AMDuProf (-C -A system -a -m ipc,l1,l2,l3,memory) for CPU Utilization (%), CPU effective freq, IPC, L2 access (pti), L2 miss (pti), L3 miss (absolute) and Mem (GB/s, and perf (stat -d -d -d -a) for Context switches, CPU migrations and Real time (s). We noted that upgrade 5.4.152 to 6.12.17 without any special preempt configuration : Two fold increase in CPU migration 30% memory bandwidth increase 20% L3 cache misses increase 10% IPC decrease With the attached fair.patch applied to 6.12.17 (reminder : this patch reverts one commit appeared in 5.10 and another in 5.16) we managed to reduce CPU migrations and increase IPC but not as much as we had on 5.4.152. Our goal is to keep kernel "clean" without any patch (we don't want to apply and maintain fair.patch) then for the rest of my email we will consider stock kernel 6.12.17. I've reduced the "sub threads count" to stays below 128 threads. Then still 21 main threads and instead of 10 worker per main thread I set 5 workers (4 of them with fine granularity) giving 105 pthreads -> everything goes fine in 6.12.17, no extra CPU migration, no extra memory bandwidth... But as soon as we increase worker threads count (10 instead of 5) the problem appears. We know our decoder may have too many threads but that's out of our scope, it has been designed like that some years ago and moving from "lot of small threads to few of big thread" is for now not possible. We have a work around : we group threads using pthread affinities. Every main thread (and by inheritance of affinities every worker threads) on a single CCX so we reduce the L3 miss for them, then decrease memory bandwidth, then finally increasing IPC. With that solution, we go above our original performances, for both kernels, and they perform at the same level. However, it is impractical to productize as such. I've tried many kernel build configurations (CONFIG_PREMPT_*, CONFIG_SCHEDULER_*, tuning of fair.c:sysctl_sched_migration_cost) on 6.12.17, 6.12.21 (longterm), 6.13.9 (mainline), and 6.14.0 Nothing changes. Q: Is there anyway to tune the kernel so we can get our performance back without using the pthread affinities work around ? Feel free to ask an archive containing binaries and payload. I first posted on https://bugzilla.kernel.org/show_bug.cgi?id=220000 but one told me the best way to get answers where these mailing lists Regards, Jean-Baptiste Roquefere, Ateme Attached bench.tar.gz : * bench/fair.patch * bench/bench.ods with 2 sheets : - regulated : decoder speed is regulated to keep real time constant - no regul : decoder speed is not regulated and uses from 1 to 76 main threads with 10 worker per main thread * bench/regulated.csv : bench.ods:regulated exported in csv format * bench/not-regulated : bench.ods:no regul exported in csv format

1 month, 1 week

5
15
0 0

[PATCH v3 1/2] iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]

by Fabio Estevam

From: Fabio Estevam <festevam(a)denx.de> Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"), booting a board populated with a MAX11601 results in a flood of warnings: max1363 1-0064: available_scan_mask 8 subset of 0. Never used max1363 1-0064: available_scan_mask 9 subset of 0. Never used max1363 1-0064: available_scan_mask 10 subset of 0. Never used max1363 1-0064: available_scan_mask 11 subset of 0. Never used max1363 1-0064: available_scan_mask 12 subset of 0. Never used max1363 1-0064: available_scan_mask 13 subset of 0. Never used ... These warnings are caused by incorrect offsets used for differential channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros. The max1363_mode_table[] defines the differential channel mappings as follows: MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12), MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13), MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14), MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15), MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16), MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17), MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18), MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19), MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20), MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21), MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22), MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23), Update the macros to follow this same pattern, ensuring that the scan masks are valid and preventing the warnings. Cc: <stable(a)vger.kernel.org> #6.12 Suggested-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- Changes since v2: - Removed incorrect Fixes: tag (Matti) Changes since v1: - Fix the problem by changing the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros. (Jonathan) drivers/iio/adc/max1363.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index a7e9912fb44a..bc44b4604ef4 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -511,10 +511,10 @@ static const struct iio_event_spec max1363_events[] = { MAX1363_CHAN_U(1, _s1, 1, bits, ev_spec, num_ev_spec), \ MAX1363_CHAN_U(2, _s2, 2, bits, ev_spec, num_ev_spec), \ MAX1363_CHAN_U(3, _s3, 3, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(0, 1, d0m1, 4, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(2, 3, d2m3, 5, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(1, 0, d1m0, 6, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(3, 2, d3m2, 7, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(0, 1, d0m1, 12, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(2, 3, d2m3, 13, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(1, 0, d1m0, 18, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(3, 2, d3m2, 19, bits, ev_spec, num_ev_spec), \ IIO_CHAN_SOFT_TIMESTAMP(8) \ } @@ -609,14 +609,14 @@ static const enum max1363_modes max11608_mode_list[] = { MAX1363_CHAN_U(5, _s5, 5, bits, NULL, 0), \ MAX1363_CHAN_U(6, _s6, 6, bits, NULL, 0), \ MAX1363_CHAN_U(7, _s7, 7, bits, NULL, 0), \ - MAX1363_CHAN_B(0, 1, d0m1, 8, bits, NULL, 0), \ - MAX1363_CHAN_B(2, 3, d2m3, 9, bits, NULL, 0), \ - MAX1363_CHAN_B(4, 5, d4m5, 10, bits, NULL, 0), \ - MAX1363_CHAN_B(6, 7, d6m7, 11, bits, NULL, 0), \ - MAX1363_CHAN_B(1, 0, d1m0, 12, bits, NULL, 0), \ - MAX1363_CHAN_B(3, 2, d3m2, 13, bits, NULL, 0), \ - MAX1363_CHAN_B(5, 4, d5m4, 14, bits, NULL, 0), \ - MAX1363_CHAN_B(7, 6, d7m6, 15, bits, NULL, 0), \ + MAX1363_CHAN_B(0, 1, d0m1, 12, bits, NULL, 0), \ + MAX1363_CHAN_B(2, 3, d2m3, 13, bits, NULL, 0), \ + MAX1363_CHAN_B(4, 5, d4m5, 14, bits, NULL, 0), \ + MAX1363_CHAN_B(6, 7, d6m7, 15, bits, NULL, 0), \ + MAX1363_CHAN_B(1, 0, d1m0, 18, bits, NULL, 0), \ + MAX1363_CHAN_B(3, 2, d3m2, 19, bits, NULL, 0), \ + MAX1363_CHAN_B(5, 4, d5m4, 20, bits, NULL, 0), \ + MAX1363_CHAN_B(7, 6, d7m6, 21, bits, NULL, 0), \ IIO_CHAN_SOFT_TIMESTAMP(16) \ } static const struct iio_chan_spec max11602_channels[] = MAX1363_8X_CHANS(8); -- 2.34.1

1 month, 1 week

3
3
0 0

iommu crash when boot kernel 5.15.179 on DELL R7715/AMD 9015

by Wang Yugui

Hi, iommu crash when kernel 5.15.179 boot on DELL R7715/AMD 9015. but kernel 6.1.133/6.6.86 boot well. It is the first time to boot kernel 5.15.y on DELL R7715/AMD 9015, so yet no more info about other 5.15.y kernel version. It seems iommu related, but seems no relationship to 5.15.181 iommu-amd-return-an-error-if-vcpu-affinity-is-set-fo.patch 5.15.182 iommu-amd-fix-potential-buffer-overflow-in-parse_ivrs_acpihid.patch dmesg output: [ 4.658313] Trying to unpack rootfs image as initramfs... [ 4.663349] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 4.664346] #PF: supervisor read access in kernel mode [ 4.664346] #PF: error_code(0x0000) - not-present page [ 4.664346] PGD 0 [ 4.664346] Oops: 0000 [#1] SMP NOPTI [ 4.664346] CPU: 8 PID: 1 Comm: swapper/0 Not tainted 5.15.179-1.el9.x86_64 #1 [ 4.664346] Hardware name: Dell Inc. PowerEdge R7715/0KRFPX, BIOS 1.1.2 02/20/2025 [ 4.664346] RIP: 0010:sysfs_add_link_to_group+0x12/0x60 [ 4.664346] Code: cb ff ff 48 89 ef 5d 41 5c e9 ca b4 ff ff 5d 41 5c c3 cc cc cc cc 66 90 0f 1f 44 00 00 41 55 49 89 cd 41 54 49 89 d4 31 d2 55 <48> 8b 7f 30 e8 a5 b2 ff ff 48 85 c0 74 29 48 89 c5 4c 89 e6 48 89 [ 4.664346] RSP: 0018:ff3f20b800047c28 EFLAGS: 00010246 [ 4.664346] RAX: 0000000000000001 RBX: ff25a0fc800530a8 RCX: ff25a0fc82cdb410 [ 4.664346] RDX: 0000000000000000 RSI: ffffffff904726e7 RDI: 0000000000000000 [ 4.664346] RBP: ff25a0fc801320d0 R08: ff3f20b800047d00 R09: ff3f20b800047d00 [ 4.664346] R10: 0720072007200720 R11: 0720072007200720 R12: ff25a0fc801320d0 [ 4.664346] R13: ff25a0fc82cdb410 R14: ff3f20b800047d00 R15: 0000000000000000 [ 4.664346] FS: 0000000000000000(0000) GS:ff25a10c1d400000(0000) knlGS:0000000000000000 [ 4.664346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4.664346] CR2: 0000000000000030 CR3: 0000001036a10001 CR4: 0000000000771ee0 [ 4.664346] PKRU: 55555554 [ 4.664346] Call Trace: [ 4.664346] <TASK> [ 4.664346] ? show_trace_log_lvl+0x1c1/0x2d9 [ 4.664346] ? show_trace_log_lvl+0x1c1/0x2d9 [ 4.664346] ? iommu_device_link+0x3f/0xb0 [ 4.664346] ? __die_body.cold+0x8/0xd [ 4.664346] ? page_fault_oops+0xac/0x140 [ 4.664346] ? exc_page_fault+0x62/0x130 [ 4.664346] ? asm_exc_page_fault+0x22/0x30 [ 4.664346] ? sysfs_add_link_to_group+0x12/0x60 [ 4.664346] iommu_device_link+0x3f/0xb0 [ 4.664346] __iommu_probe_device+0x188/0x260 [ 4.664346] ? __iommu_probe_device+0x260/0x260 [ 4.664346] probe_iommu_group+0x31/0x40 [ 4.664346] bus_for_each_dev+0x75/0xc0 [ 4.664346] bus_iommu_probe+0x48/0x2c0 [ 4.664346] ? kmem_cache_alloc_trace+0x165/0x290 [ 4.664346] ? __cond_resched+0x16/0x50 [ 4.664346] bus_set_iommu+0x8c/0xe0 [ 4.664346] amd_iommu_init_api+0x18/0x34 [ 4.664346] amd_iommu_init_pci+0x56/0x21c [ 4.664346] ? e820__memblock_setup+0x7d/0x7d [ 4.664346] state_next+0x19a/0x2d4 [ 4.664346] ? blake2s_update+0x48/0xc0 [ 4.664346] ? e820__memblock_setup+0x7d/0x7d [ 4.664346] iommu_go_to_state+0x24/0x2c [ 4.664346] amd_iommu_init+0xf/0x29 [ 4.664346] pci_iommu_init+0x16/0x43 [ 4.664346] do_one_initcall+0x41/0x1d0 [ 4.664346] do_initcalls+0xc6/0xdf [ 4.664346] kernel_init_freeable+0x14e/0x19d [ 4.664346] ? rest_init+0xc0/0xc0 [ 4.664346] kernel_init+0x16/0x130 [ 4.664346] ret_from_fork+0x1f/0x30 [ 4.664346] </TASK> [ 4.664346] Modules linked in: [ 4.664346] CR2: 0000000000000030 [ 4.664346] ---[ end trace 9672514da279163d ]--- [ 4.664346] RIP: 0010:sysfs_add_link_to_group+0x12/0x60 [ 4.664346] Code: cb ff ff 48 89 ef 5d 41 5c e9 ca b4 ff ff 5d 41 5c c3 cc cc cc cc 66 90 0f 1f 44 00 00 41 55 49 89 cd 41 54 49 89 d4 31 d2 55 <48> 8b 7f 30 e8 a5 b2 ff ff 48 85 c0 74 29 48 89 c5 4c 89 e6 48 89 [ 4.664346] RSP: 0018:ff3f20b800047c28 EFLAGS: 00010246 [ 4.664346] RAX: 0000000000000001 RBX: ff25a0fc800530a8 RCX: ff25a0fc82cdb410 [ 4.664346] RDX: 0000000000000000 RSI: ffffffff904726e7 RDI: 0000000000000000 [ 4.664346] RBP: ff25a0fc801320d0 R08: ff3f20b800047d00 R09: ff3f20b800047d00 [ 4.664346] R10: 0720072007200720 R11: 0720072007200720 R12: ff25a0fc801320d0 [ 4.664346] R13: ff25a0fc82cdb410 R14: ff3f20b800047d00 R15: 0000000000000000 [ 4.664346] FS: 0000000000000000(0000) GS:ff25a10c1d400000(0000) knlGS:0000000000000000 [ 4.664346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4.664346] CR2: 0000000000000030 CR3: 0000001036a10001 CR4: 0000000000771ee0 [ 4.664346] PKRU: 55555554 [ 4.664346] Kernel panic - not syncing: Fatal exception [ 4.664346] Rebooting in 15 seconds.. Best Regards Wang Yugui (wangyugui(a)e16-tech.com) 2025/05/18

1 month, 1 week

2
2
0 0

[PATCH] x86/pmem: Fix a null pointer dereference in register_e820_pmem()

by Haoxiang Li

Add check for the return value of platform_device_alloc() to prevent null pointer dereference. Fixes: 7a67832c7e44 ("libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option") Cc: stable(a)vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> --- arch/x86/kernel/pmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/pmem.c b/arch/x86/kernel/pmem.c index 23154d24b117..04fb221716ff 100644 --- a/arch/x86/kernel/pmem.c +++ b/arch/x86/kernel/pmem.c @@ -27,6 +27,8 @@ static __init int register_e820_pmem(void) * simply here to trigger the module to load on demand. */ pdev = platform_device_alloc("e820_pmem", -1); + if (!pdev) + return -ENOMEM; rc = platform_device_add(pdev); if (rc) -- 2.25.1

1 month, 1 week

1
0
0 0

[PATCH] rust: compile libcore with edition 2024 for 1.87+

by Gary Guo

Rust 1.87 (released on 2025-05-15) compiles core library with edition 2024 instead of 2021 [1]. Ensure that the edition matches libcore's expectation to avoid potential breakage. Cc: stable(a)vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs). Link: https://github.com/rust-lang/rust/pull/138162 [1] Closes: https://github.com/Rust-for-Linux/linux/issues/1163 Signed-off-by: Gary Guo <gary(a)garyguo.net> --- rust/Makefile | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/rust/Makefile b/rust/Makefile index 3aca903a7d08..9e7f1ec06181 100644 --- a/rust/Makefile +++ b/rust/Makefile @@ -60,6 +60,12 @@ endif core-cfgs = \ --cfg no_fp_fmt_parse +ifeq ($(call rustc-min-version,108700),y) +core-cfgs += --edition=2024 +else +core-cfgs += --edition=2021 +endif + # `rustc` recognizes `--remap-path-prefix` since 1.26.0, but `rustdoc` only # since Rust 1.81.0. Moreover, `rustdoc` ICEs on out-of-tree builds since Rust # 1.82.0 (https://github.com/rust-lang/rust/issues/138520). Thus workaround both @@ -106,7 +112,7 @@ rustdoc-macros: $(src)/macros/lib.rs FORCE # Starting with Rust 1.82.0, skipping `-Wrustdoc::unescaped_backticks` should # not be needed -- see https://github.com/rust-lang/rust/pull/128307. -rustdoc-core: private skip_flags = -Wrustdoc::unescaped_backticks +rustdoc-core: private skip_flags = -Wrustdoc::unescaped_backticks --edition=2021 rustdoc-core: private rustc_target_flags = $(core-cfgs) rustdoc-core: $(RUST_LIB_SRC)/core/src/lib.rs FORCE +$(call if_changed,rustdoc) @@ -416,7 +422,7 @@ quiet_cmd_rustc_library = $(if $(skip_clippy),RUSTC,$(RUSTC_OR_CLIPPY_QUIET)) L cmd_rustc_library = \ OBJTREE=$(abspath $(objtree)) \ $(if $(skip_clippy),$(RUSTC),$(RUSTC_OR_CLIPPY)) \ - $(filter-out $(skip_flags),$(rust_flags) $(rustc_target_flags)) \ + $(filter-out $(skip_flags),$(rust_flags)) $(rustc_target_flags) \ --emit=dep-info=$(depfile) --emit=obj=$@ \ --emit=metadata=$(dir $@)$(patsubst %.o,lib%.rmeta,$(notdir $@)) \ --crate-type rlib -L$(objtree)/$(obj) \ @@ -483,7 +489,7 @@ $(obj)/helpers/helpers.o: $(src)/helpers/helpers.c $(recordmcount_source) FORCE $(obj)/exports.o: private skip_gendwarfksyms = 1 $(obj)/core.o: private skip_clippy = 1 -$(obj)/core.o: private skip_flags = -Wunreachable_pub +$(obj)/core.o: private skip_flags = -Wunreachable_pub --edition=2021 $(obj)/core.o: private rustc_objcopy = $(foreach sym,$(redirect-intrinsics),--redefine-sym $(sym)=__rust$(sym)) $(obj)/core.o: private rustc_target_flags = $(core-cfgs) $(obj)/core.o: $(RUST_LIB_SRC)/core/src/lib.rs \ base-commit: 172a9d94339cea832d89630b89d314e41d622bd8 -- 2.47.2

1 month, 1 week

3
3
0 0

[PATCH v2 1/2] iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]

by Fabio Estevam

From: Fabio Estevam <festevam(a)denx.de> Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"), booting a board populated with a MAX11601 results in a flood of warnings: max1363 1-0064: available_scan_mask 8 subset of 0. Never used max1363 1-0064: available_scan_mask 9 subset of 0. Never used max1363 1-0064: available_scan_mask 10 subset of 0. Never used max1363 1-0064: available_scan_mask 11 subset of 0. Never used max1363 1-0064: available_scan_mask 12 subset of 0. Never used max1363 1-0064: available_scan_mask 13 subset of 0. Never used ... These warnings are caused by incorrect offsets used for differential channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros. The max1363_mode_table[] defines the differential channel mappings as follows: MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12), MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13), MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14), MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15), MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16), MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17), MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18), MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19), MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20), MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21), MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22), MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23), Update the macros to follow this same pattern, ensuring that the scan masks are valid and preventing the warnings. Cc: stable(a)vger.kernel.org Fixes: 2718f15403fb ("iio: sanity check available_scan_masks array") Suggested-by: Jonathan Cameron <jic23(a)kernel.org> Signed-off-by: Fabio Estevam <festevam(a)denx.de> --- Changes since v1: - Fix the problem by changing the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros. (Jonathan) drivers/iio/adc/max1363.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index a7e9912fb44a..bc44b4604ef4 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -511,10 +511,10 @@ static const struct iio_event_spec max1363_events[] = { MAX1363_CHAN_U(1, _s1, 1, bits, ev_spec, num_ev_spec), \ MAX1363_CHAN_U(2, _s2, 2, bits, ev_spec, num_ev_spec), \ MAX1363_CHAN_U(3, _s3, 3, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(0, 1, d0m1, 4, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(2, 3, d2m3, 5, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(1, 0, d1m0, 6, bits, ev_spec, num_ev_spec), \ - MAX1363_CHAN_B(3, 2, d3m2, 7, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(0, 1, d0m1, 12, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(2, 3, d2m3, 13, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(1, 0, d1m0, 18, bits, ev_spec, num_ev_spec), \ + MAX1363_CHAN_B(3, 2, d3m2, 19, bits, ev_spec, num_ev_spec), \ IIO_CHAN_SOFT_TIMESTAMP(8) \ } @@ -609,14 +609,14 @@ static const enum max1363_modes max11608_mode_list[] = { MAX1363_CHAN_U(5, _s5, 5, bits, NULL, 0), \ MAX1363_CHAN_U(6, _s6, 6, bits, NULL, 0), \ MAX1363_CHAN_U(7, _s7, 7, bits, NULL, 0), \ - MAX1363_CHAN_B(0, 1, d0m1, 8, bits, NULL, 0), \ - MAX1363_CHAN_B(2, 3, d2m3, 9, bits, NULL, 0), \ - MAX1363_CHAN_B(4, 5, d4m5, 10, bits, NULL, 0), \ - MAX1363_CHAN_B(6, 7, d6m7, 11, bits, NULL, 0), \ - MAX1363_CHAN_B(1, 0, d1m0, 12, bits, NULL, 0), \ - MAX1363_CHAN_B(3, 2, d3m2, 13, bits, NULL, 0), \ - MAX1363_CHAN_B(5, 4, d5m4, 14, bits, NULL, 0), \ - MAX1363_CHAN_B(7, 6, d7m6, 15, bits, NULL, 0), \ + MAX1363_CHAN_B(0, 1, d0m1, 12, bits, NULL, 0), \ + MAX1363_CHAN_B(2, 3, d2m3, 13, bits, NULL, 0), \ + MAX1363_CHAN_B(4, 5, d4m5, 14, bits, NULL, 0), \ + MAX1363_CHAN_B(6, 7, d6m7, 15, bits, NULL, 0), \ + MAX1363_CHAN_B(1, 0, d1m0, 18, bits, NULL, 0), \ + MAX1363_CHAN_B(3, 2, d3m2, 19, bits, NULL, 0), \ + MAX1363_CHAN_B(5, 4, d5m4, 20, bits, NULL, 0), \ + MAX1363_CHAN_B(7, 6, d7m6, 21, bits, NULL, 0), \ IIO_CHAN_SOFT_TIMESTAMP(16) \ } static const struct iio_chan_spec max11602_channels[] = MAX1363_8X_CHANS(8); -- 2.34.1

1 month, 1 week

3
6
0 0

FAILED: patch "[PATCH] mmc: sdhci-of-dwcmshc: add PD workaround on RK3576" failed to apply to 6.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.14.y git checkout FETCH_HEAD git cherry-pick -x 08f959759e1e6e9c4b898c51a7d387ac3480630b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025052516-factsheet-coagulant-3fb0@gregkh' --subject-prefix 'PATCH 6.14.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 08f959759e1e6e9c4b898c51a7d387ac3480630b Mon Sep 17 00:00:00 2001 From: Nicolas Frattaroli <nicolas.frattaroli(a)collabora.com> Date: Wed, 23 Apr 2025 09:53:32 +0200 Subject: [PATCH] mmc: sdhci-of-dwcmshc: add PD workaround on RK3576 RK3576's power domains have a peculiar design where the PD_NVM power domain, of which the sdhci controller is a part, seemingly does not have idempotent runtime disable/enable. The end effect is that if PD_NVM gets turned off by the generic power domain logic because all the devices depending on it are suspended, then the next time the sdhci device is unsuspended, it'll hang the SoC as soon as it tries accessing the CQHCI registers. RK3576's UFS support needed a new dev_pm_genpd_rpm_always_on function added to the generic power domains API to handle what appears to be a similar hardware design. Use this new function to ask for the same treatment in the sdhci controller by giving rk3576 its own platform data with its own postinit function. The benefit of doing this instead of marking the power domains always on in the power domain core is that we only do this if we know the platform we're running on actually uses the sdhci controller. For others, keeping PD_NVM always on would be a waste, as they won't run into this specific issue. The only other IP in PD_NVM that could be affected is FSPI0. If it gets a mainline driver, it will probably want to do the same thing. Acked-by: Adrian Hunter <adrian.hunter(a)intel.com> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli(a)collabora.com> Reviewed-by: Shawn Lin <shawn.lin(a)rock-chips.com> Fixes: cfee1b507758 ("pmdomain: rockchip: Add support for RK3576 SoC") Cc: <stable(a)vger.kernel.org> # v6.15+ Link: https://lore.kernel.org/r/20250423-rk3576-emmc-fix-v3-1-0bf80e29967f@collab… Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c index 09b9ab15e499..a20d03fdd6a9 100644 --- a/drivers/mmc/host/sdhci-of-dwcmshc.c +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> #include <linux/pm_runtime.h> #include <linux/reset.h> #include <linux/sizes.h> @@ -745,6 +746,29 @@ static void dwcmshc_rk35xx_postinit(struct sdhci_host *host, struct dwcmshc_priv } } +static void dwcmshc_rk3576_postinit(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv) +{ + struct device *dev = mmc_dev(host->mmc); + int ret; + + /* + * This works around the design of the RK3576's power domains, which + * makes the PD_NVM power domain, which the sdhci controller on the + * RK3576 is in, never come back the same way once it's run-time + * suspended once. This can happen during early kernel boot if no driver + * is using either PD_NVM or its child power domain PD_SDGMAC for a + * short moment, leading to it being turned off to save power. By + * keeping it on, sdhci suspending won't lead to PD_NVM becoming a + * candidate for getting turned off. + */ + ret = dev_pm_genpd_rpm_always_on(dev, true); + if (ret && ret != -EOPNOTSUPP) + dev_warn(dev, "failed to set PD rpm always on, SoC may hang later: %pe\n", + ERR_PTR(ret)); + + dwcmshc_rk35xx_postinit(host, dwc_priv); +} + static int th1520_execute_tuning(struct sdhci_host *host, u32 opcode) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -1176,6 +1200,18 @@ static const struct dwcmshc_pltfm_data sdhci_dwcmshc_rk35xx_pdata = { .postinit = dwcmshc_rk35xx_postinit, }; +static const struct dwcmshc_pltfm_data sdhci_dwcmshc_rk3576_pdata = { + .pdata = { + .ops = &sdhci_dwcmshc_rk35xx_ops, + .quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | + SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN, + }, + .init = dwcmshc_rk35xx_init, + .postinit = dwcmshc_rk3576_postinit, +}; + static const struct dwcmshc_pltfm_data sdhci_dwcmshc_th1520_pdata = { .pdata = { .ops = &sdhci_dwcmshc_th1520_ops, @@ -1274,6 +1310,10 @@ static const struct of_device_id sdhci_dwcmshc_dt_ids[] = { .compatible = "rockchip,rk3588-dwcmshc", .data = &sdhci_dwcmshc_rk35xx_pdata, }, + { + .compatible = "rockchip,rk3576-dwcmshc", + .data = &sdhci_dwcmshc_rk3576_pdata, + }, { .compatible = "rockchip,rk3568-dwcmshc", .data = &sdhci_dwcmshc_rk35xx_pdata,

1 month, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025