May 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] KVM: x86: Load DR6 with guest value only before entering" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x c2fee09fc167c74a64adb08656cb993ea475197e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021809-census-mammal-224b@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c2fee09fc167c74a64adb08656cb993ea475197e Mon Sep 17 00:00:00 2001 From: Sean Christopherson <seanjc(a)google.com> Date: Fri, 24 Jan 2025 17:18:33 -0800 Subject: [PATCH] KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_entry: vcpu 23 L1 writes DR7, L0 disables DR interception CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007 CPU 23/KVM-5046 [001] d.... 3410.005613: kvm_entry: vcpu 23 L0 writes DR6 = 0 (arch.dr6) CPU 23/KVM-5046 [001] d.... 3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0 A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'> B: CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_entry: vcpu 23 C: L0 writes DR6 = 0 (arch.dr6) CPU 23/KVM-5046 [001] d.... 3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0 L1 => L2 nested VM-Enter CPU 23/KVM-5046 [001] d.... 3410.005616: kvm_exit: vcpu 23 reason VMRESUME L0 reads DR6, arch.dr6 = 0 Reported-by: John Stultz <jstultz(a)google.com> Closes: https://lkml.kernel.org/r/CANDhNCq5_F3HfFYABqFGCA1bPd_%2BxgNj-iDQhH4tDk%2Bw… Fixes: 375e28ffc0cf ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT") Fixes: d67668e9dd76 ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6") Cc: stable(a)vger.kernel.org Cc: Jim Mattson <jmattson(a)google.com> Tested-by: John Stultz <jstultz(a)google.com> Link: https://lore.kernel.org/r/20250125011833.3644371-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc(a)google.com> diff --git a/arch/x86/include/asm/kvm-x86-ops.h b/arch/x86/include/asm/kvm-x86-ops.h index c35550581da0..823c0434bbad 100644 --- a/arch/x86/include/asm/kvm-x86-ops.h +++ b/arch/x86/include/asm/kvm-x86-ops.h @@ -48,6 +48,7 @@ KVM_X86_OP(set_idt) KVM_X86_OP(get_gdt) KVM_X86_OP(set_gdt) KVM_X86_OP(sync_dirty_debug_regs) +KVM_X86_OP(set_dr6) KVM_X86_OP(set_dr7) KVM_X86_OP(cache_reg) KVM_X86_OP(get_rflags) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index b15cde0a9b5c..0b7af5902ff7 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1696,6 +1696,7 @@ struct kvm_x86_ops { void (*get_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void (*set_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void (*sync_dirty_debug_regs)(struct kvm_vcpu *vcpu); + void (*set_dr6)(struct kvm_vcpu *vcpu, unsigned long value); void (*set_dr7)(struct kvm_vcpu *vcpu, unsigned long value); void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg); unsigned long (*get_rflags)(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 7640a84e554a..a713c803a3a3 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -1991,11 +1991,11 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *sd) svm->asid = sd->next_asid++; } -static void svm_set_dr6(struct vcpu_svm *svm, unsigned long value) +static void svm_set_dr6(struct kvm_vcpu *vcpu, unsigned long value) { - struct vmcb *vmcb = svm->vmcb; + struct vmcb *vmcb = to_svm(vcpu)->vmcb; - if (svm->vcpu.arch.guest_state_protected) + if (vcpu->arch.guest_state_protected) return; if (unlikely(value != vmcb->save.dr6)) { @@ -4247,10 +4247,8 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu, * Run with all-zero DR6 unless needed, so that we can get the exact cause * of a #DB. */ - if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) - svm_set_dr6(svm, vcpu->arch.dr6); - else - svm_set_dr6(svm, DR6_ACTIVE_LOW); + if (likely(!(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))) + svm_set_dr6(vcpu, DR6_ACTIVE_LOW); clgi(); kvm_load_guest_xsave_state(vcpu); @@ -5043,6 +5041,7 @@ static struct kvm_x86_ops svm_x86_ops __initdata = { .set_idt = svm_set_idt, .get_gdt = svm_get_gdt, .set_gdt = svm_set_gdt, + .set_dr6 = svm_set_dr6, .set_dr7 = svm_set_dr7, .sync_dirty_debug_regs = svm_sync_dirty_debug_regs, .cache_reg = svm_cache_reg, diff --git a/arch/x86/kvm/vmx/main.c b/arch/x86/kvm/vmx/main.c index 2427f918e763..43ee9ed11291 100644 --- a/arch/x86/kvm/vmx/main.c +++ b/arch/x86/kvm/vmx/main.c @@ -61,6 +61,7 @@ struct kvm_x86_ops vt_x86_ops __initdata = { .set_idt = vmx_set_idt, .get_gdt = vmx_get_gdt, .set_gdt = vmx_set_gdt, + .set_dr6 = vmx_set_dr6, .set_dr7 = vmx_set_dr7, .sync_dirty_debug_regs = vmx_sync_dirty_debug_regs, .cache_reg = vmx_cache_reg, diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index f72835e85b6d..6c56d5235f0f 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -5648,6 +5648,12 @@ void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu) set_debugreg(DR6_RESERVED, 6); } +void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val) +{ + lockdep_assert_irqs_disabled(); + set_debugreg(vcpu->arch.dr6, 6); +} + void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val) { vmcs_writel(GUEST_DR7, val); @@ -7417,10 +7423,6 @@ fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu, bool force_immediate_exit) vmx->loaded_vmcs->host_state.cr4 = cr4; } - /* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */ - if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) - set_debugreg(vcpu->arch.dr6, 6); - /* When single-stepping over STI and MOV SS, we must clear the * corresponding interruptibility bits in the guest state. Otherwise * vmentry fails as it then expects bit 14 (BS) in pending debug diff --git a/arch/x86/kvm/vmx/x86_ops.h b/arch/x86/kvm/vmx/x86_ops.h index ce3295a67c04..430773a5ef8e 100644 --- a/arch/x86/kvm/vmx/x86_ops.h +++ b/arch/x86/kvm/vmx/x86_ops.h @@ -73,6 +73,7 @@ void vmx_get_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void vmx_set_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void vmx_get_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void vmx_set_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); +void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val); void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val); void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu); void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8e77e61d4fbd..02159c967d29 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -10961,6 +10961,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) set_debugreg(vcpu->arch.eff_db[1], 1); set_debugreg(vcpu->arch.eff_db[2], 2); set_debugreg(vcpu->arch.eff_db[3], 3); + /* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */ + if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) + kvm_x86_call(set_dr6)(vcpu, vcpu->arch.dr6); } else if (unlikely(hw_breakpoint_active())) { set_debugreg(0, 7); }

1 week

3
2
0 0

FAILED: patch "[PATCH] KVM: x86: Load DR6 with guest value only before entering" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x c2fee09fc167c74a64adb08656cb993ea475197e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021812-candied-hamper-7f08@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From c2fee09fc167c74a64adb08656cb993ea475197e Mon Sep 17 00:00:00 2001 From: Sean Christopherson <seanjc(a)google.com> Date: Fri, 24 Jan 2025 17:18:33 -0800 Subject: [PATCH] KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop Move the conditional loading of hardware DR6 with the guest's DR6 value out of the core .vcpu_run() loop to fix a bug where KVM can load hardware with a stale vcpu->arch.dr6. When the guest accesses a DR and host userspace isn't debugging the guest, KVM disables DR interception and loads the guest's values into hardware on VM-Enter and saves them on VM-Exit. This allows the guest to access DRs at will, e.g. so that a sequence of DR accesses to configure a breakpoint only generates one VM-Exit. For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest) and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop. But for DR6, the guest's value doesn't need to be loaded into hardware for KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas VMX requires software to manually load the guest value, and so loading the guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done _inside_ the core run loop. Unfortunately, saving the guest values on VM-Exit is initiated by common x86, again outside of the core run loop. If the guest modifies DR6 (in hardware, when DR interception is disabled), and then the next VM-Exit is a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and clobber the guest's actual value. The bug shows up primarily with nested VMX because KVM handles the VMX preemption timer in the fastpath, and the window between hardware DR6 being modified (in guest context) and DR6 being read by guest software is orders of magnitude larger in a nested setup. E.g. in non-nested, the VMX preemption timer would need to fire precisely between #DB injection and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the window where hardware DR6 is "dirty" extends all the way from L1 writing DR6 to VMRESUME (in L1). L1's view: ========== <L1 disables DR interception> CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0 A: L1 Writes DR6 CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1 B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec D: L1 reads DR6, arch.dr6 = 0 CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0 CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0 L2 reads DR6, L1 disables DR interception CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216 CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0 CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0 L2 detects failure CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT L1 reads DR6 (confirms failure) CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0 L0's view: ========== L2 reads DR6, arch.dr6 = 0 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216 L2 => L1 nested VM-Exit CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216 CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23 CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason VMREAD CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_entry: vcpu 23 L1 writes DR7, L0 disables DR interception CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007 CPU 23/KVM-5046 [001] d.... 3410.005613: kvm_entry: vcpu 23 L0 writes DR6 = 0 (arch.dr6) CPU 23/KVM-5046 [001] d.... 3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0 A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'> B: CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_entry: vcpu 23 C: L0 writes DR6 = 0 (arch.dr6) CPU 23/KVM-5046 [001] d.... 3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0 L1 => L2 nested VM-Enter CPU 23/KVM-5046 [001] d.... 3410.005616: kvm_exit: vcpu 23 reason VMRESUME L0 reads DR6, arch.dr6 = 0 Reported-by: John Stultz <jstultz(a)google.com> Closes: https://lkml.kernel.org/r/CANDhNCq5_F3HfFYABqFGCA1bPd_%2BxgNj-iDQhH4tDk%2Bw… Fixes: 375e28ffc0cf ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT") Fixes: d67668e9dd76 ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6") Cc: stable(a)vger.kernel.org Cc: Jim Mattson <jmattson(a)google.com> Tested-by: John Stultz <jstultz(a)google.com> Link: https://lore.kernel.org/r/20250125011833.3644371-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc(a)google.com> diff --git a/arch/x86/include/asm/kvm-x86-ops.h b/arch/x86/include/asm/kvm-x86-ops.h index c35550581da0..823c0434bbad 100644 --- a/arch/x86/include/asm/kvm-x86-ops.h +++ b/arch/x86/include/asm/kvm-x86-ops.h @@ -48,6 +48,7 @@ KVM_X86_OP(set_idt) KVM_X86_OP(get_gdt) KVM_X86_OP(set_gdt) KVM_X86_OP(sync_dirty_debug_regs) +KVM_X86_OP(set_dr6) KVM_X86_OP(set_dr7) KVM_X86_OP(cache_reg) KVM_X86_OP(get_rflags) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index b15cde0a9b5c..0b7af5902ff7 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1696,6 +1696,7 @@ struct kvm_x86_ops { void (*get_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void (*set_gdt)(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void (*sync_dirty_debug_regs)(struct kvm_vcpu *vcpu); + void (*set_dr6)(struct kvm_vcpu *vcpu, unsigned long value); void (*set_dr7)(struct kvm_vcpu *vcpu, unsigned long value); void (*cache_reg)(struct kvm_vcpu *vcpu, enum kvm_reg reg); unsigned long (*get_rflags)(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c index 7640a84e554a..a713c803a3a3 100644 --- a/arch/x86/kvm/svm/svm.c +++ b/arch/x86/kvm/svm/svm.c @@ -1991,11 +1991,11 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *sd) svm->asid = sd->next_asid++; } -static void svm_set_dr6(struct vcpu_svm *svm, unsigned long value) +static void svm_set_dr6(struct kvm_vcpu *vcpu, unsigned long value) { - struct vmcb *vmcb = svm->vmcb; + struct vmcb *vmcb = to_svm(vcpu)->vmcb; - if (svm->vcpu.arch.guest_state_protected) + if (vcpu->arch.guest_state_protected) return; if (unlikely(value != vmcb->save.dr6)) { @@ -4247,10 +4247,8 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu, * Run with all-zero DR6 unless needed, so that we can get the exact cause * of a #DB. */ - if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) - svm_set_dr6(svm, vcpu->arch.dr6); - else - svm_set_dr6(svm, DR6_ACTIVE_LOW); + if (likely(!(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))) + svm_set_dr6(vcpu, DR6_ACTIVE_LOW); clgi(); kvm_load_guest_xsave_state(vcpu); @@ -5043,6 +5041,7 @@ static struct kvm_x86_ops svm_x86_ops __initdata = { .set_idt = svm_set_idt, .get_gdt = svm_get_gdt, .set_gdt = svm_set_gdt, + .set_dr6 = svm_set_dr6, .set_dr7 = svm_set_dr7, .sync_dirty_debug_regs = svm_sync_dirty_debug_regs, .cache_reg = svm_cache_reg, diff --git a/arch/x86/kvm/vmx/main.c b/arch/x86/kvm/vmx/main.c index 2427f918e763..43ee9ed11291 100644 --- a/arch/x86/kvm/vmx/main.c +++ b/arch/x86/kvm/vmx/main.c @@ -61,6 +61,7 @@ struct kvm_x86_ops vt_x86_ops __initdata = { .set_idt = vmx_set_idt, .get_gdt = vmx_get_gdt, .set_gdt = vmx_set_gdt, + .set_dr6 = vmx_set_dr6, .set_dr7 = vmx_set_dr7, .sync_dirty_debug_regs = vmx_sync_dirty_debug_regs, .cache_reg = vmx_cache_reg, diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index f72835e85b6d..6c56d5235f0f 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -5648,6 +5648,12 @@ void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu) set_debugreg(DR6_RESERVED, 6); } +void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val) +{ + lockdep_assert_irqs_disabled(); + set_debugreg(vcpu->arch.dr6, 6); +} + void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val) { vmcs_writel(GUEST_DR7, val); @@ -7417,10 +7423,6 @@ fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu, bool force_immediate_exit) vmx->loaded_vmcs->host_state.cr4 = cr4; } - /* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */ - if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) - set_debugreg(vcpu->arch.dr6, 6); - /* When single-stepping over STI and MOV SS, we must clear the * corresponding interruptibility bits in the guest state. Otherwise * vmentry fails as it then expects bit 14 (BS) in pending debug diff --git a/arch/x86/kvm/vmx/x86_ops.h b/arch/x86/kvm/vmx/x86_ops.h index ce3295a67c04..430773a5ef8e 100644 --- a/arch/x86/kvm/vmx/x86_ops.h +++ b/arch/x86/kvm/vmx/x86_ops.h @@ -73,6 +73,7 @@ void vmx_get_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void vmx_set_idt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void vmx_get_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); void vmx_set_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt); +void vmx_set_dr6(struct kvm_vcpu *vcpu, unsigned long val); void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val); void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu); void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8e77e61d4fbd..02159c967d29 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -10961,6 +10961,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) set_debugreg(vcpu->arch.eff_db[1], 1); set_debugreg(vcpu->arch.eff_db[2], 2); set_debugreg(vcpu->arch.eff_db[3], 3); + /* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */ + if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) + kvm_x86_call(set_dr6)(vcpu, vcpu->arch.dr6); } else if (unlikely(hw_breakpoint_active())) { set_debugreg(0, 7); }

1 week

3
2
0 0

Re: [PATCH] Handle Ice Lake MONITOR erratum

by Christian Ludloff

> [ICX143 in https://cdrdv2.intel.com/v1/dl/getContent/637780] > There is no equivalent erratum for the "Xeon D" Ice Lakes so > INTEL_ICELAKE_D is not affected. There is ICXD80 in... https://www.intel.com/content/www/us/en/content-details/714069/intel-xeon-d… https://www.intel.com/content/www/us/en/content-details/714071/intel-xeon-d… And although the ICL spec update... https://edc.intel.com/content/www/us/en/design/ipla/software-development-pl… ...doesn't seem to have a MONITOR erratum, it might be a good idea for Intel to double check. -- Christian

1 week

2
1
0 0

[PATCH v5] Restrict devmem for confidential VMs

by Dan Williams

Changes since v3 [1] (note v4 was a partial re-roll, but more feedback came in requiring a v5): - Fix a kbuild robot report for a missing header include of cc_platform.h - Switch to selecting STRICT_DEVMEM and IOSTRICT_DEVMEM rather than "depends on". (Naveen) - Clarify the "SEPT violation" vs "crash" and other changelog fixups for devmem maintainers and other arch maintainers. (Dave) - Drop patch numbering since patch2 is a fix and has no dependencies on patch1 [1]: http://lore.kernel.org/174491711228.1395340.3647010925173796093.stgit@dwill… --- The original response to Nikolay's report of a "crash" (unhandled SEPT violation) triggered by /dev/mem access to private memory was "let's just turn off /dev/mem". After some machinations of x86_platform_ops to block a subset of problematic access, spelunking the history of devmem_is_allowed() returning "2" to enable some compatibility benefits while blocking access, and discovering that userspace depends buggy kernel behavior for mmap(2) of the first 1MB of memory on x86, the proposal has circled back to "disable /dev/mem". Require both STRICT_DEVMEM and IO_STRICT_DEVMEM for x86 confidential guests to close /dev/mem hole while still allowing for userspace mapping of PCI MMIO as long as the kernel and userspace are not mapping the range at the same time. The range_is_allowed() cleanup is not strictly necessary, but might as well close a 17 year-old "TODO". Dan Williams (2): x86/devmem: Remove duplicate range_is_allowed() definition x86/devmem: Drop /dev/mem access for confidential guests arch/x86/Kconfig | 4 ++++ arch/x86/mm/pat/memtype.c | 31 ++++--------------------------- drivers/char/mem.c | 28 ++++++++++------------------ include/linux/io.h | 21 +++++++++++++++++++++ 4 files changed, 39 insertions(+), 45 deletions(-) base-commit: 0af2f6be1b4281385b618cb86ad946eded089ac8 -- 2.49.0

1 week

4
10
0 0

[PATCH 6.1 00/16] xfs backports for 6.1.y from 6.10

by Leah Rumancik

Hello again, This is the 6.1.y backports set from 6.10 which corresponds to the 6.6.y backports set from here: https://lore.kernel.org/all/20241002174108.64615-1-catherine.hoang@oracle.c… The following patches were included: f43bd357fde0 xfs: fix error returns from xfs_bmapi_write 4bcef72d96b5 xfs: fix xfs_bmap_add_extent_delay_real for partial conversions c299188b443a xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent c13c21f77824 xfs: require XFS_SB_FEAT_INCOMPAT_LOG_XATTRS for attr log intent item recovey 0934046e3392 xfs: check opcode and iovec count match in xlog_recover_attri_commit_pass2 9716cdcc2f9e xfs: validate recovered name buffers when recovering xattr items 20adb1e2f069 xfs: revert commit 44af6c7e59b12 f24ba2183148 xfs: match lock mode in xfs_buffered_write_iomap_begin() 0f726c17dfd8 xfs: make the seq argument to xfs_bmapi_convert_delalloc() optional 36081fd0ee37 xfs: make xfs_bmapi_convert_delalloc() to allocate the target offset 4c99f3026cf2 xfs: convert delayed extents to unwritten when zeroing post eof blocks 0aca73915dc1 xfs: allow symlinks with short remote targets 0e52b98bf041 xfs: make sure sb_fdblocks is non-negative 2bc2d49c36c2 xfs: fix freeing speculative preallocations for preallocated files 3eeac3311683 xfs: allow unlinked symlinks and dirs with zero size 9a0ab4fc28ed xfs: restrict when we try to align cow fork delalloc to cowextsz hints The following patches were omitted: cad051826d83 xfs: fix missing check for invalid attr flags scrub db460c26f0b0 xfs: check shortform attr entry flags specifically scrub 5689d2345a01 xfs: enforce one namespace per attribute doesn't cherry pick cleanly, it is some refactoring and isn't a dependency for other patches, lets skip it for now 7c03b124353a xfs: use dontcache for grabbing inodes during scrub scrub 740a427e8f45 xfs: fix unlink vs cluster buffer instantiation race already in 6.1.y No fixes were found on mainline for any of the patches being ported. The auto group was run 1x on each of these configs: xfs/4k xfs/1k xfs/logdev xfs/realtime xfs/quota xfs/v4 xfs/dax xfs/adv xfs/dirblock_8k and no regressions were seen. This set has already been ack'd on the xfs-stable list. Let me know if you see any issues. Thanks, Leah Christoph Hellwig (4): xfs: fix error returns from xfs_bmapi_write xfs: fix xfs_bmap_add_extent_delay_real for partial conversions xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent xfs: fix freeing speculative preallocations for preallocated files Darrick J. Wong (7): xfs: require XFS_SB_FEAT_INCOMPAT_LOG_XATTRS for attr log intent item recovery xfs: check opcode and iovec count match in xlog_recover_attri_commit_pass2 xfs: validate recovered name buffers when recovering xattr items xfs: revert commit 44af6c7e59b12 xfs: allow symlinks with short remote targets xfs: allow unlinked symlinks and dirs with zero size xfs: restrict when we try to align cow fork delalloc to cowextsz hints Wengang Wang (1): xfs: make sure sb_fdblocks is non-negative Zhang Yi (4): xfs: match lock mode in xfs_buffered_write_iomap_begin() xfs: make the seq argument to xfs_bmapi_convert_delalloc() optional xfs: make xfs_bmapi_convert_delalloc() to allocate the target offset xfs: convert delayed extents to unwritten when zeroing post eof blocks fs/xfs/libxfs/xfs_attr_remote.c | 1 - fs/xfs/libxfs/xfs_bmap.c | 130 ++++++++++++++++++++++++++------ fs/xfs/libxfs/xfs_da_btree.c | 20 ++--- fs/xfs/libxfs/xfs_inode_buf.c | 47 ++++++++++-- fs/xfs/libxfs/xfs_sb.c | 7 +- fs/xfs/scrub/attr.c | 5 ++ fs/xfs/xfs_aops.c | 54 ++++--------- fs/xfs/xfs_attr_item.c | 88 ++++++++++++++++++--- fs/xfs/xfs_bmap_util.c | 61 +++++++++------ fs/xfs/xfs_bmap_util.h | 2 +- fs/xfs/xfs_dquot.c | 1 - fs/xfs/xfs_icache.c | 2 +- fs/xfs/xfs_inode.c | 14 +--- fs/xfs/xfs_iomap.c | 81 +++++++++++--------- fs/xfs/xfs_reflink.c | 20 ----- fs/xfs/xfs_rtalloc.c | 2 - 16 files changed, 342 insertions(+), 193 deletions(-) -- 2.49.0.906.g1f30a19c02-goog

1 week

2
32
0 0

[PATCH stable 6.6 00/10] bpf: track changes_pkt_data property for global functions

by Shung-Hsi Yu

Fix the bypassing of invalid packet pointer check in 6.6 by backporting the entire "bpf: track changes_pkt_data property for global functions" series[1], along with the follow up, "bpf: fix NPE when computing changes_pkt_data of program w/o subprograms" series[2]; both from Eduard. I had ran the BPF selftests after backporting, confirmed that newly added BPF selftests passes, and that no new failure observed in BPF selftests (dummy_st_ops, ns_current_pid_tgid, test_bpf_ma, and test_bpffs are failing even without this patchset applied). See [3] for the full log. #50/1 changes_pkt_data_freplace/changes_pkt_data_with_changes_pkt_data:OK #50/2 changes_pkt_data_freplace/changes_pkt_data_with_does_not_change_pkt_data:OK #50/3 changes_pkt_data_freplace/does_not_change_pkt_data_with_changes_pkt_data:OK #50/4 changes_pkt_data_freplace/does_not_change_pkt_data_with_does_not_change_pkt_data:OK #50/5 changes_pkt_data_freplace/main_changes_with_changes_pkt_data:OK #50/6 changes_pkt_data_freplace/main_changes_with_does_not_change_pkt_data:OK #50/7 changes_pkt_data_freplace/main_does_not_change_with_changes_pkt_data:OK #50/8 changes_pkt_data_freplace/main_does_not_change_with_does_not_change_pkt_data:OK #395/57 verifier_sock/invalidate_pkt_pointers_from_global_func:OK #395/58 verifier_sock/invalidate_pkt_pointers_by_tail_call:OK 1: https://lore.kernel.org/all/20241210041100.1898468-1-eddyz87@gmail.com/ 2: https://lore.kernel.org/all/20241212070711.427443-1-eddyz87@gmail.com/ 3: https://github.com/shunghsiyu/libbpf/actions/runs/14747347842/job/413971041… Eduard Zingerman (10): bpf: add find_containing_subprog() utility function bpf: refactor bpf_helper_changes_pkt_data to use helper number bpf: track changes_pkt_data property for global functions selftests/bpf: test for changing packet data from global functions bpf: check changes_pkt_data property for extension programs selftests/bpf: freplace tests for tracking of changes_packet_data bpf: consider that tail calls invalidate packet pointers selftests/bpf: validate that tail call invalidates packet pointers bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs selftests/bpf: extend changes_pkt_data with cases w/o subprograms include/linux/bpf.h | 1 + include/linux/bpf_verifier.h | 1 + include/linux/filter.h | 2 +- kernel/bpf/core.c | 2 +- kernel/bpf/verifier.c | 81 +++++++++++-- net/core/filter.c | 63 +++++------ .../bpf/prog_tests/changes_pkt_data.c | 107 ++++++++++++++++++ .../selftests/bpf/progs/changes_pkt_data.c | 39 +++++++ .../bpf/progs/changes_pkt_data_freplace.c | 18 +++ .../selftests/bpf/progs/verifier_sock.c | 56 +++++++++ 10 files changed, 324 insertions(+), 46 deletions(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/changes_pkt_data.c create mode 100644 tools/testing/selftests/bpf/progs/changes_pkt_data.c create mode 100644 tools/testing/selftests/bpf/progs/changes_pkt_data_freplace.c -- 2.49.0

1 week

2
20
0 0

[PATCH 6.12.y 0/6] Bluetooth: btusb: add a bunch of USB device IDs for Qualcomm WCN785x

by Alexander Tsoy

This was tested on a device with USB ID 2c7c:0130

1 week

2
12
0 0

FAILED: patch "[PATCH] comedi: jr3_pci: Fix synchronous deletion of timer" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x 44d9b3f584c59a606b521e7274e658d5b866c699 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025042808-vastly-armrest-7811@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 44d9b3f584c59a606b521e7274e658d5b866c699 Mon Sep 17 00:00:00 2001 From: Ian Abbott <abbotti(a)mev.co.uk> Date: Tue, 15 Apr 2025 13:39:01 +0100 Subject: [PATCH] comedi: jr3_pci: Fix synchronous deletion of timer When `jr3_pci_detach()` is called during device removal, it calls `timer_delete_sync()` to stop the timer, but the timer expiry function always reschedules the timer, so the synchronization is ineffective. Call `timer_shutdown_sync()` instead. It does not matter that the timer expiry function pointer is cleared, because the device is being removed. Fixes: 07b509e6584a5 ("Staging: comedi: add jr3_pci driver") Cc: stable <stable(a)kernel.org> Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk> Link: https://lore.kernel.org/r/20250415123901.13483-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/comedi/drivers/jr3_pci.c b/drivers/comedi/drivers/jr3_pci.c index cdc842b32bab..75dce1ff2419 100644 --- a/drivers/comedi/drivers/jr3_pci.c +++ b/drivers/comedi/drivers/jr3_pci.c @@ -758,7 +758,7 @@ static void jr3_pci_detach(struct comedi_device *dev) struct jr3_pci_dev_private *devpriv = dev->private; if (devpriv) - timer_delete_sync(&devpriv->timer); + timer_shutdown_sync(&devpriv->timer); comedi_pci_detach(dev); }

1 week

3
2
0 0

FAILED: patch "[PATCH] binder: fix offset calculation in debug log" failed to apply to 6.12-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 170d1a3738908eef6a0dbf378ea77fb4ae8e294d # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025042803-deflected-overdue-01a5@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 170d1a3738908eef6a0dbf378ea77fb4ae8e294d Mon Sep 17 00:00:00 2001 From: Carlos Llamas <cmllamas(a)google.com> Date: Tue, 25 Mar 2025 18:49:00 +0000 Subject: [PATCH] binder: fix offset calculation in debug log The vma start address should be substracted from the buffer's user data address and not the other way around. Cc: Tiffany Y. Yang <ynaffit(a)google.com> Cc: stable <stable(a)kernel.org> Fixes: 162c79731448 ("binder: avoid user addresses in debug logs") Signed-off-by: Carlos Llamas <cmllamas(a)google.com> Reviewed-by: Tiffany Y. Yang <ynaffit(a)google.com> Link: https://lore.kernel.org/r/20250325184902.587138-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 76052006bd87..5fc2c8ee61b1 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -6373,7 +6373,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m, seq_printf(m, " node %d", buffer->target_node->debug_id); seq_printf(m, " size %zd:%zd offset %lx\n", buffer->data_size, buffer->offsets_size, - proc->alloc.vm_start - buffer->user_data); + buffer->user_data - proc->alloc.vm_start); } static void print_binder_work_ilocked(struct seq_file *m,

1 week

3
2
0 0

[PATCH stable v6.6] riscv: kprobes: Fix wrong lengths passed to patch_text_nosync()

by Nam Cao

Unlike patch_text(), patch_text_nosync() takes the length in bytes, not number of instructions. It is therefore wrong for arch_prepare_ss_slot() to pass length=1 while patching one instruction. This bug was introduced by commit b1756750a397 ("riscv: kprobes: Use patch_text_nosync() for insn slots"). It has been fixed upstream by commit 51781ce8f448 ("riscv: Pass patch_text() the length in bytes"). However, beside fixing this bug, this commit does many other things, making it unsuitable for backporting. Fix it by properly passing the lengths in bytes. Fixes: b1756750a397 ("riscv: kprobes: Use patch_text_nosync() for insn slots") Signed-off-by: Nam Cao <namcao(a)linutronix.de> --- arch/riscv/kernel/probes/kprobes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kernel/probes/kprobes.c b/arch/riscv/kernel/probes/kprobes.c index 4fbc70e823f0..dc431b965bc3 100644 --- a/arch/riscv/kernel/probes/kprobes.c +++ b/arch/riscv/kernel/probes/kprobes.c @@ -28,8 +28,8 @@ static void __kprobes arch_prepare_ss_slot(struct kprobe *p) p->ainsn.api.restore = (unsigned long)p->addr + offset; - patch_text_nosync(p->ainsn.api.insn, &p->opcode, 1); - patch_text_nosync((void *)p->ainsn.api.insn + offset, &insn, 1); + patch_text_nosync(p->ainsn.api.insn, &p->opcode, offset); + patch_text_nosync((void *)p->ainsn.api.insn + offset, &insn, sizeof(insn)); } static void __kprobes arch_prepare_simulate(struct kprobe *p) -- 2.39.5

1 week

3
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror May 2025