June 2025 - Linux-stable-mirror

FAILED: patch "[PATCH] x86/traps: Initialize DR6 by writing its architectural reset" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x 5f465c148c61e876b6d6eacd8e8e365f2d47758f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025063013-city-unloaded-a949@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5f465c148c61e876b6d6eacd8e8e365f2d47758f Mon Sep 17 00:00:00 2001 From: "Xin Li (Intel)" <xin(a)zytor.com> Date: Fri, 20 Jun 2025 16:15:03 -0700 Subject: [PATCH] x86/traps: Initialize DR6 by writing its architectural reset value Initialize DR6 by writing its architectural reset value to avoid incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads to a false bus lock detected warning. The Intel SDM says: 1) Certain debug exceptions may clear bits 0-3 of DR6. 2) BLD induced #DB clears DR6.BLD and any other debug exception doesn't modify DR6.BLD. 3) RTM induced #DB clears DR6.RTM and any other debug exception sets DR6.RTM. To avoid confusion in identifying debug exceptions, debug handlers should set DR6.BLD and DR6.RTM, and clear other DR6 bits before returning. The DR6 architectural reset value 0xFFFF0FF0, already defined as macro DR6_RESERVED, satisfies these requirements, so just use it to reinitialize DR6 whenever needed. Since clear_all_debug_regs() no longer zeros all debug registers, rename it to initialize_debug_regs() to better reflect its current behavior. Since debug_read_clear_dr6() no longer clears DR6, rename it to debug_read_reset_dr6() to better reflect its current behavior. Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock") Reported-by: Sohil Mehta <sohil.mehta(a)intel.com> Suggested-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: Xin Li (Intel) <xin(a)zytor.com> Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Reviewed-by: Sohil Mehta <sohil.mehta(a)intel.com> Acked-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Tested-by: Sohil Mehta <sohil.mehta(a)intel.com> Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/ Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com diff --git a/arch/x86/include/uapi/asm/debugreg.h b/arch/x86/include/uapi/asm/debugreg.h index 0007ba077c0c..41da492dfb01 100644 --- a/arch/x86/include/uapi/asm/debugreg.h +++ b/arch/x86/include/uapi/asm/debugreg.h @@ -15,7 +15,26 @@ which debugging register was responsible for the trap. The other bits are either reserved or not of interest to us. */ -/* Define reserved bits in DR6 which are always set to 1 */ +/* + * Define bits in DR6 which are set to 1 by default. + * + * This is also the DR6 architectural value following Power-up, Reset or INIT. + * + * Note, with the introduction of Bus Lock Detection (BLD) and Restricted + * Transactional Memory (RTM), the DR6 register has been modified: + * + * 1) BLD flag (bit 11) is no longer reserved to 1 if the CPU supports + * Bus Lock Detection. The assertion of a bus lock could clear it. + * + * 2) RTM flag (bit 16) is no longer reserved to 1 if the CPU supports + * restricted transactional memory. #DB occurred inside an RTM region + * could clear it. + * + * Apparently, DR6.BLD and DR6.RTM are active low bits. + * + * As a result, DR6_RESERVED is an incorrect name now, but it is kept for + * compatibility. + */ #define DR6_RESERVED (0xFFFF0FF0) #define DR_TRAP0 (0x1) /* db0 */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 8feb8fd2957a..0f6c280a94f0 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -2243,20 +2243,16 @@ EXPORT_PER_CPU_SYMBOL(__stack_chk_guard); #endif #endif -/* - * Clear all 6 debug registers: - */ -static void clear_all_debug_regs(void) +static void initialize_debug_regs(void) { - int i; - - for (i = 0; i < 8; i++) { - /* Ignore db4, db5 */ - if ((i == 4) || (i == 5)) - continue; - - set_debugreg(0, i); - } + /* Control register first -- to make sure everything is disabled. */ + set_debugreg(0, 7); + set_debugreg(DR6_RESERVED, 6); + /* dr5 and dr4 don't exist */ + set_debugreg(0, 3); + set_debugreg(0, 2); + set_debugreg(0, 1); + set_debugreg(0, 0); } #ifdef CONFIG_KGDB @@ -2417,7 +2413,7 @@ void cpu_init(void) load_mm_ldt(&init_mm); - clear_all_debug_regs(); + initialize_debug_regs(); dbg_restore_debug_regs(); doublefault_init_cpu_tss(); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index c5c897a86418..36354b470590 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -1022,24 +1022,32 @@ static bool is_sysenter_singlestep(struct pt_regs *regs) #endif } -static __always_inline unsigned long debug_read_clear_dr6(void) +static __always_inline unsigned long debug_read_reset_dr6(void) { unsigned long dr6; + get_debugreg(dr6, 6); + dr6 ^= DR6_RESERVED; /* Flip to positive polarity */ + /* * The Intel SDM says: * - * Certain debug exceptions may clear bits 0-3. The remaining - * contents of the DR6 register are never cleared by the - * processor. To avoid confusion in identifying debug - * exceptions, debug handlers should clear the register before - * returning to the interrupted task. + * Certain debug exceptions may clear bits 0-3 of DR6. * - * Keep it simple: clear DR6 immediately. + * BLD induced #DB clears DR6.BLD and any other debug + * exception doesn't modify DR6.BLD. + * + * RTM induced #DB clears DR6.RTM and any other debug + * exception sets DR6.RTM. + * + * To avoid confusion in identifying debug exceptions, + * debug handlers should set DR6.BLD and DR6.RTM, and + * clear other DR6 bits before returning. + * + * Keep it simple: write DR6 with its architectural reset + * value 0xFFFF0FF0, defined as DR6_RESERVED, immediately. */ - get_debugreg(dr6, 6); set_debugreg(DR6_RESERVED, 6); - dr6 ^= DR6_RESERVED; /* Flip to positive polarity */ return dr6; } @@ -1239,13 +1247,13 @@ static noinstr void exc_debug_user(struct pt_regs *regs, unsigned long dr6) /* IST stack entry */ DEFINE_IDTENTRY_DEBUG(exc_debug) { - exc_debug_kernel(regs, debug_read_clear_dr6()); + exc_debug_kernel(regs, debug_read_reset_dr6()); } /* User entry, runs on regular task stack */ DEFINE_IDTENTRY_DEBUG_USER(exc_debug) { - exc_debug_user(regs, debug_read_clear_dr6()); + exc_debug_user(regs, debug_read_reset_dr6()); } #ifdef CONFIG_X86_FRED @@ -1264,7 +1272,7 @@ DEFINE_FREDENTRY_DEBUG(exc_debug) { /* * FRED #DB stores DR6 on the stack in the format which - * debug_read_clear_dr6() returns for the IDT entry points. + * debug_read_reset_dr6() returns for the IDT entry points. */ unsigned long dr6 = fred_event_data(regs); @@ -1279,7 +1287,7 @@ DEFINE_FREDENTRY_DEBUG(exc_debug) /* 32 bit does not have separate entry points. */ DEFINE_IDTENTRY_RAW(exc_debug) { - unsigned long dr6 = debug_read_clear_dr6(); + unsigned long dr6 = debug_read_reset_dr6(); if (user_mode(regs)) exc_debug_user(regs, dr6);

1 month

1
0
0 0

FAILED: patch "[PATCH] x86/traps: Initialize DR6 by writing its architectural reset" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 5f465c148c61e876b6d6eacd8e8e365f2d47758f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025063012-clammy-bluish-930d@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5f465c148c61e876b6d6eacd8e8e365f2d47758f Mon Sep 17 00:00:00 2001 From: "Xin Li (Intel)" <xin(a)zytor.com> Date: Fri, 20 Jun 2025 16:15:03 -0700 Subject: [PATCH] x86/traps: Initialize DR6 by writing its architectural reset value Initialize DR6 by writing its architectural reset value to avoid incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads to a false bus lock detected warning. The Intel SDM says: 1) Certain debug exceptions may clear bits 0-3 of DR6. 2) BLD induced #DB clears DR6.BLD and any other debug exception doesn't modify DR6.BLD. 3) RTM induced #DB clears DR6.RTM and any other debug exception sets DR6.RTM. To avoid confusion in identifying debug exceptions, debug handlers should set DR6.BLD and DR6.RTM, and clear other DR6 bits before returning. The DR6 architectural reset value 0xFFFF0FF0, already defined as macro DR6_RESERVED, satisfies these requirements, so just use it to reinitialize DR6 whenever needed. Since clear_all_debug_regs() no longer zeros all debug registers, rename it to initialize_debug_regs() to better reflect its current behavior. Since debug_read_clear_dr6() no longer clears DR6, rename it to debug_read_reset_dr6() to better reflect its current behavior. Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock") Reported-by: Sohil Mehta <sohil.mehta(a)intel.com> Suggested-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: Xin Li (Intel) <xin(a)zytor.com> Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Reviewed-by: Sohil Mehta <sohil.mehta(a)intel.com> Acked-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Tested-by: Sohil Mehta <sohil.mehta(a)intel.com> Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/ Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com diff --git a/arch/x86/include/uapi/asm/debugreg.h b/arch/x86/include/uapi/asm/debugreg.h index 0007ba077c0c..41da492dfb01 100644 --- a/arch/x86/include/uapi/asm/debugreg.h +++ b/arch/x86/include/uapi/asm/debugreg.h @@ -15,7 +15,26 @@ which debugging register was responsible for the trap. The other bits are either reserved or not of interest to us. */ -/* Define reserved bits in DR6 which are always set to 1 */ +/* + * Define bits in DR6 which are set to 1 by default. + * + * This is also the DR6 architectural value following Power-up, Reset or INIT. + * + * Note, with the introduction of Bus Lock Detection (BLD) and Restricted + * Transactional Memory (RTM), the DR6 register has been modified: + * + * 1) BLD flag (bit 11) is no longer reserved to 1 if the CPU supports + * Bus Lock Detection. The assertion of a bus lock could clear it. + * + * 2) RTM flag (bit 16) is no longer reserved to 1 if the CPU supports + * restricted transactional memory. #DB occurred inside an RTM region + * could clear it. + * + * Apparently, DR6.BLD and DR6.RTM are active low bits. + * + * As a result, DR6_RESERVED is an incorrect name now, but it is kept for + * compatibility. + */ #define DR6_RESERVED (0xFFFF0FF0) #define DR_TRAP0 (0x1) /* db0 */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 8feb8fd2957a..0f6c280a94f0 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -2243,20 +2243,16 @@ EXPORT_PER_CPU_SYMBOL(__stack_chk_guard); #endif #endif -/* - * Clear all 6 debug registers: - */ -static void clear_all_debug_regs(void) +static void initialize_debug_regs(void) { - int i; - - for (i = 0; i < 8; i++) { - /* Ignore db4, db5 */ - if ((i == 4) || (i == 5)) - continue; - - set_debugreg(0, i); - } + /* Control register first -- to make sure everything is disabled. */ + set_debugreg(0, 7); + set_debugreg(DR6_RESERVED, 6); + /* dr5 and dr4 don't exist */ + set_debugreg(0, 3); + set_debugreg(0, 2); + set_debugreg(0, 1); + set_debugreg(0, 0); } #ifdef CONFIG_KGDB @@ -2417,7 +2413,7 @@ void cpu_init(void) load_mm_ldt(&init_mm); - clear_all_debug_regs(); + initialize_debug_regs(); dbg_restore_debug_regs(); doublefault_init_cpu_tss(); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index c5c897a86418..36354b470590 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -1022,24 +1022,32 @@ static bool is_sysenter_singlestep(struct pt_regs *regs) #endif } -static __always_inline unsigned long debug_read_clear_dr6(void) +static __always_inline unsigned long debug_read_reset_dr6(void) { unsigned long dr6; + get_debugreg(dr6, 6); + dr6 ^= DR6_RESERVED; /* Flip to positive polarity */ + /* * The Intel SDM says: * - * Certain debug exceptions may clear bits 0-3. The remaining - * contents of the DR6 register are never cleared by the - * processor. To avoid confusion in identifying debug - * exceptions, debug handlers should clear the register before - * returning to the interrupted task. + * Certain debug exceptions may clear bits 0-3 of DR6. * - * Keep it simple: clear DR6 immediately. + * BLD induced #DB clears DR6.BLD and any other debug + * exception doesn't modify DR6.BLD. + * + * RTM induced #DB clears DR6.RTM and any other debug + * exception sets DR6.RTM. + * + * To avoid confusion in identifying debug exceptions, + * debug handlers should set DR6.BLD and DR6.RTM, and + * clear other DR6 bits before returning. + * + * Keep it simple: write DR6 with its architectural reset + * value 0xFFFF0FF0, defined as DR6_RESERVED, immediately. */ - get_debugreg(dr6, 6); set_debugreg(DR6_RESERVED, 6); - dr6 ^= DR6_RESERVED; /* Flip to positive polarity */ return dr6; } @@ -1239,13 +1247,13 @@ static noinstr void exc_debug_user(struct pt_regs *regs, unsigned long dr6) /* IST stack entry */ DEFINE_IDTENTRY_DEBUG(exc_debug) { - exc_debug_kernel(regs, debug_read_clear_dr6()); + exc_debug_kernel(regs, debug_read_reset_dr6()); } /* User entry, runs on regular task stack */ DEFINE_IDTENTRY_DEBUG_USER(exc_debug) { - exc_debug_user(regs, debug_read_clear_dr6()); + exc_debug_user(regs, debug_read_reset_dr6()); } #ifdef CONFIG_X86_FRED @@ -1264,7 +1272,7 @@ DEFINE_FREDENTRY_DEBUG(exc_debug) { /* * FRED #DB stores DR6 on the stack in the format which - * debug_read_clear_dr6() returns for the IDT entry points. + * debug_read_reset_dr6() returns for the IDT entry points. */ unsigned long dr6 = fred_event_data(regs); @@ -1279,7 +1287,7 @@ DEFINE_FREDENTRY_DEBUG(exc_debug) /* 32 bit does not have separate entry points. */ DEFINE_IDTENTRY_RAW(exc_debug) { - unsigned long dr6 = debug_read_clear_dr6(); + unsigned long dr6 = debug_read_reset_dr6(); if (user_mode(regs)) exc_debug_user(regs, dr6);

1 month

1
0
0 0

FAILED: patch "[PATCH] x86/traps: Initialize DR6 by writing its architectural reset" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 5f465c148c61e876b6d6eacd8e8e365f2d47758f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025063008-shimmy-doorstep-3c89@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5f465c148c61e876b6d6eacd8e8e365f2d47758f Mon Sep 17 00:00:00 2001 From: "Xin Li (Intel)" <xin(a)zytor.com> Date: Fri, 20 Jun 2025 16:15:03 -0700 Subject: [PATCH] x86/traps: Initialize DR6 by writing its architectural reset value Initialize DR6 by writing its architectural reset value to avoid incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads to a false bus lock detected warning. The Intel SDM says: 1) Certain debug exceptions may clear bits 0-3 of DR6. 2) BLD induced #DB clears DR6.BLD and any other debug exception doesn't modify DR6.BLD. 3) RTM induced #DB clears DR6.RTM and any other debug exception sets DR6.RTM. To avoid confusion in identifying debug exceptions, debug handlers should set DR6.BLD and DR6.RTM, and clear other DR6 bits before returning. The DR6 architectural reset value 0xFFFF0FF0, already defined as macro DR6_RESERVED, satisfies these requirements, so just use it to reinitialize DR6 whenever needed. Since clear_all_debug_regs() no longer zeros all debug registers, rename it to initialize_debug_regs() to better reflect its current behavior. Since debug_read_clear_dr6() no longer clears DR6, rename it to debug_read_reset_dr6() to better reflect its current behavior. Fixes: ebb1064e7c2e9 ("x86/traps: Handle #DB for bus lock") Reported-by: Sohil Mehta <sohil.mehta(a)intel.com> Suggested-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Signed-off-by: Xin Li (Intel) <xin(a)zytor.com> Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa(a)zytor.com> Reviewed-by: Sohil Mehta <sohil.mehta(a)intel.com> Acked-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Tested-by: Sohil Mehta <sohil.mehta(a)intel.com> Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/ Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com diff --git a/arch/x86/include/uapi/asm/debugreg.h b/arch/x86/include/uapi/asm/debugreg.h index 0007ba077c0c..41da492dfb01 100644 --- a/arch/x86/include/uapi/asm/debugreg.h +++ b/arch/x86/include/uapi/asm/debugreg.h @@ -15,7 +15,26 @@ which debugging register was responsible for the trap. The other bits are either reserved or not of interest to us. */ -/* Define reserved bits in DR6 which are always set to 1 */ +/* + * Define bits in DR6 which are set to 1 by default. + * + * This is also the DR6 architectural value following Power-up, Reset or INIT. + * + * Note, with the introduction of Bus Lock Detection (BLD) and Restricted + * Transactional Memory (RTM), the DR6 register has been modified: + * + * 1) BLD flag (bit 11) is no longer reserved to 1 if the CPU supports + * Bus Lock Detection. The assertion of a bus lock could clear it. + * + * 2) RTM flag (bit 16) is no longer reserved to 1 if the CPU supports + * restricted transactional memory. #DB occurred inside an RTM region + * could clear it. + * + * Apparently, DR6.BLD and DR6.RTM are active low bits. + * + * As a result, DR6_RESERVED is an incorrect name now, but it is kept for + * compatibility. + */ #define DR6_RESERVED (0xFFFF0FF0) #define DR_TRAP0 (0x1) /* db0 */ diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 8feb8fd2957a..0f6c280a94f0 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -2243,20 +2243,16 @@ EXPORT_PER_CPU_SYMBOL(__stack_chk_guard); #endif #endif -/* - * Clear all 6 debug registers: - */ -static void clear_all_debug_regs(void) +static void initialize_debug_regs(void) { - int i; - - for (i = 0; i < 8; i++) { - /* Ignore db4, db5 */ - if ((i == 4) || (i == 5)) - continue; - - set_debugreg(0, i); - } + /* Control register first -- to make sure everything is disabled. */ + set_debugreg(0, 7); + set_debugreg(DR6_RESERVED, 6); + /* dr5 and dr4 don't exist */ + set_debugreg(0, 3); + set_debugreg(0, 2); + set_debugreg(0, 1); + set_debugreg(0, 0); } #ifdef CONFIG_KGDB @@ -2417,7 +2413,7 @@ void cpu_init(void) load_mm_ldt(&init_mm); - clear_all_debug_regs(); + initialize_debug_regs(); dbg_restore_debug_regs(); doublefault_init_cpu_tss(); diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index c5c897a86418..36354b470590 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -1022,24 +1022,32 @@ static bool is_sysenter_singlestep(struct pt_regs *regs) #endif } -static __always_inline unsigned long debug_read_clear_dr6(void) +static __always_inline unsigned long debug_read_reset_dr6(void) { unsigned long dr6; + get_debugreg(dr6, 6); + dr6 ^= DR6_RESERVED; /* Flip to positive polarity */ + /* * The Intel SDM says: * - * Certain debug exceptions may clear bits 0-3. The remaining - * contents of the DR6 register are never cleared by the - * processor. To avoid confusion in identifying debug - * exceptions, debug handlers should clear the register before - * returning to the interrupted task. + * Certain debug exceptions may clear bits 0-3 of DR6. * - * Keep it simple: clear DR6 immediately. + * BLD induced #DB clears DR6.BLD and any other debug + * exception doesn't modify DR6.BLD. + * + * RTM induced #DB clears DR6.RTM and any other debug + * exception sets DR6.RTM. + * + * To avoid confusion in identifying debug exceptions, + * debug handlers should set DR6.BLD and DR6.RTM, and + * clear other DR6 bits before returning. + * + * Keep it simple: write DR6 with its architectural reset + * value 0xFFFF0FF0, defined as DR6_RESERVED, immediately. */ - get_debugreg(dr6, 6); set_debugreg(DR6_RESERVED, 6); - dr6 ^= DR6_RESERVED; /* Flip to positive polarity */ return dr6; } @@ -1239,13 +1247,13 @@ static noinstr void exc_debug_user(struct pt_regs *regs, unsigned long dr6) /* IST stack entry */ DEFINE_IDTENTRY_DEBUG(exc_debug) { - exc_debug_kernel(regs, debug_read_clear_dr6()); + exc_debug_kernel(regs, debug_read_reset_dr6()); } /* User entry, runs on regular task stack */ DEFINE_IDTENTRY_DEBUG_USER(exc_debug) { - exc_debug_user(regs, debug_read_clear_dr6()); + exc_debug_user(regs, debug_read_reset_dr6()); } #ifdef CONFIG_X86_FRED @@ -1264,7 +1272,7 @@ DEFINE_FREDENTRY_DEBUG(exc_debug) { /* * FRED #DB stores DR6 on the stack in the format which - * debug_read_clear_dr6() returns for the IDT entry points. + * debug_read_reset_dr6() returns for the IDT entry points. */ unsigned long dr6 = fred_event_data(regs); @@ -1279,7 +1287,7 @@ DEFINE_FREDENTRY_DEBUG(exc_debug) /* 32 bit does not have separate entry points. */ DEFINE_IDTENTRY_RAW(exc_debug) { - unsigned long dr6 = debug_read_clear_dr6(); + unsigned long dr6 = debug_read_reset_dr6(); if (user_mode(regs)) exc_debug_user(regs, dr6);

1 month

1
0
0 0

FAILED: patch "[PATCH] EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs" failed to apply to 5.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y git checkout FETCH_HEAD git cherry-pick -x a3f3040657417aeadb9622c629d4a0c2693a0f93 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025063041-arrival-closable-5d15@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a3f3040657417aeadb9622c629d4a0c2693a0f93 Mon Sep 17 00:00:00 2001 From: Avadhut Naik <avadhut.naik(a)amd.com> Date: Thu, 29 May 2025 20:50:04 +0000 Subject: [PATCH] EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based SOCs has an Address Mask and a Secondary Address Mask register associated with it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity during init using these two registers. Currently, the module primarily considers only the Address Mask register for computing DIMM sizes. The Secondary Address Mask register is only considered for odd CS. Additionally, if it has been considered, the Address Mask register is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose total capacity is a power of two (32GB, 64GB, etc), this is not an issue since only the Address Mask register is used. For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of two (48GB, 96GB, etc), however, the Secondary Address Mask register is used in conjunction with the Address Mask register. However, since the module only considers either of the two registers for a CS, the size computed by the module is incorrect. The Secondary Address Mask register is not considered for even CS, and the Address Mask register is not considered for odd CS. Introduce a new helper function so that both Address Mask and Secondary Address Mask registers are considered, when valid, for computing DIMM sizes. Furthermore, also rename some variables for greater clarity. Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs") Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt Reported-by: Žilvinas Žaltiena <zilvinas(a)natrix.lt> Signed-off-by: Avadhut Naik <avadhut.naik(a)amd.com> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Yazen Ghannam <yazen.ghannam(a)amd.com> Tested-by: Žilvinas Žaltiena <zilvinas(a)natrix.lt> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index b681c0663203..07f1e9dc1ca7 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1209,7 +1209,9 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) if (csrow_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_PRIMARY; - /* Asymmetric dual-rank DIMM support. */ + if (csrow_sec_enabled(2 * dimm, ctrl, pvt)) + cs_mode |= CS_EVEN_SECONDARY; + if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_SECONDARY; @@ -1230,12 +1232,13 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) return cs_mode; } -static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, - int csrow_nr, int dimm) +static int calculate_cs_size(u32 mask, unsigned int cs_mode) { - u32 msb, weight, num_zero_bits; - u32 addr_mask_deinterleaved; - int size = 0; + int msb, weight, num_zero_bits; + u32 deinterleaved_mask; + + if (!mask) + return 0; /* * The number of zero bits in the mask is equal to the number of bits @@ -1248,19 +1251,30 @@ static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, * without swapping with the most significant bit. This can be handled * by keeping the MSB where it is and ignoring the single zero bit. */ - msb = fls(addr_mask_orig) - 1; - weight = hweight_long(addr_mask_orig); + msb = fls(mask) - 1; + weight = hweight_long(mask); num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE); /* Take the number of zero bits off from the top of the mask. */ - addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1); + deinterleaved_mask = GENMASK(msb - num_zero_bits, 1); + edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", deinterleaved_mask); + + return (deinterleaved_mask >> 2) + 1; +} + +static int __addr_mask_to_cs_size(u32 addr_mask, u32 addr_mask_sec, + unsigned int cs_mode, int csrow_nr, int dimm) +{ + int size; edac_dbg(1, "CS%d DIMM%d AddrMasks:\n", csrow_nr, dimm); - edac_dbg(1, " Original AddrMask: 0x%x\n", addr_mask_orig); - edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", addr_mask_deinterleaved); + edac_dbg(1, " Primary AddrMask: 0x%x\n", addr_mask); /* Register [31:1] = Address [39:9]. Size is in kBs here. */ - size = (addr_mask_deinterleaved >> 2) + 1; + size = calculate_cs_size(addr_mask, cs_mode); + + edac_dbg(1, " Secondary AddrMask: 0x%x\n", addr_mask_sec); + size += calculate_cs_size(addr_mask_sec, cs_mode); /* Return size in MBs. */ return size >> 10; @@ -1269,8 +1283,8 @@ static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { + u32 addr_mask = 0, addr_mask_sec = 0; int cs_mask_nr = csrow_nr; - u32 addr_mask_orig; int dimm, size = 0; /* No Chip Selects are enabled. */ @@ -1308,13 +1322,13 @@ static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, if (!pvt->flags.zn_regs_v2) cs_mask_nr >>= 1; - /* Asymmetric dual-rank DIMM support. */ - if ((csrow_nr & 1) && (cs_mode & CS_ODD_SECONDARY)) - addr_mask_orig = pvt->csels[umc].csmasks_sec[cs_mask_nr]; - else - addr_mask_orig = pvt->csels[umc].csmasks[cs_mask_nr]; + if (cs_mode & (CS_EVEN_PRIMARY | CS_ODD_PRIMARY)) + addr_mask = pvt->csels[umc].csmasks[cs_mask_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, dimm); + if (cs_mode & (CS_EVEN_SECONDARY | CS_ODD_SECONDARY)) + addr_mask_sec = pvt->csels[umc].csmasks_sec[cs_mask_nr]; + + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, dimm); } static void umc_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) @@ -3512,9 +3526,10 @@ static void gpu_get_err_info(struct mce *m, struct err_info *err) static int gpu_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { - u32 addr_mask_orig = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask_sec = pvt->csels[umc].csmasks_sec[csrow_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, csrow_nr >> 1); + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, csrow_nr >> 1); } static void gpu_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)

1 month

1
0
0 0

FAILED: patch "[PATCH] EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs" failed to apply to 5.10-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x a3f3040657417aeadb9622c629d4a0c2693a0f93 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025063036-washroom-swiftness-1860@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a3f3040657417aeadb9622c629d4a0c2693a0f93 Mon Sep 17 00:00:00 2001 From: Avadhut Naik <avadhut.naik(a)amd.com> Date: Thu, 29 May 2025 20:50:04 +0000 Subject: [PATCH] EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based SOCs has an Address Mask and a Secondary Address Mask register associated with it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity during init using these two registers. Currently, the module primarily considers only the Address Mask register for computing DIMM sizes. The Secondary Address Mask register is only considered for odd CS. Additionally, if it has been considered, the Address Mask register is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose total capacity is a power of two (32GB, 64GB, etc), this is not an issue since only the Address Mask register is used. For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of two (48GB, 96GB, etc), however, the Secondary Address Mask register is used in conjunction with the Address Mask register. However, since the module only considers either of the two registers for a CS, the size computed by the module is incorrect. The Secondary Address Mask register is not considered for even CS, and the Address Mask register is not considered for odd CS. Introduce a new helper function so that both Address Mask and Secondary Address Mask registers are considered, when valid, for computing DIMM sizes. Furthermore, also rename some variables for greater clarity. Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs") Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt Reported-by: Žilvinas Žaltiena <zilvinas(a)natrix.lt> Signed-off-by: Avadhut Naik <avadhut.naik(a)amd.com> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Yazen Ghannam <yazen.ghannam(a)amd.com> Tested-by: Žilvinas Žaltiena <zilvinas(a)natrix.lt> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index b681c0663203..07f1e9dc1ca7 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1209,7 +1209,9 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) if (csrow_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_PRIMARY; - /* Asymmetric dual-rank DIMM support. */ + if (csrow_sec_enabled(2 * dimm, ctrl, pvt)) + cs_mode |= CS_EVEN_SECONDARY; + if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_SECONDARY; @@ -1230,12 +1232,13 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) return cs_mode; } -static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, - int csrow_nr, int dimm) +static int calculate_cs_size(u32 mask, unsigned int cs_mode) { - u32 msb, weight, num_zero_bits; - u32 addr_mask_deinterleaved; - int size = 0; + int msb, weight, num_zero_bits; + u32 deinterleaved_mask; + + if (!mask) + return 0; /* * The number of zero bits in the mask is equal to the number of bits @@ -1248,19 +1251,30 @@ static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, * without swapping with the most significant bit. This can be handled * by keeping the MSB where it is and ignoring the single zero bit. */ - msb = fls(addr_mask_orig) - 1; - weight = hweight_long(addr_mask_orig); + msb = fls(mask) - 1; + weight = hweight_long(mask); num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE); /* Take the number of zero bits off from the top of the mask. */ - addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1); + deinterleaved_mask = GENMASK(msb - num_zero_bits, 1); + edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", deinterleaved_mask); + + return (deinterleaved_mask >> 2) + 1; +} + +static int __addr_mask_to_cs_size(u32 addr_mask, u32 addr_mask_sec, + unsigned int cs_mode, int csrow_nr, int dimm) +{ + int size; edac_dbg(1, "CS%d DIMM%d AddrMasks:\n", csrow_nr, dimm); - edac_dbg(1, " Original AddrMask: 0x%x\n", addr_mask_orig); - edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", addr_mask_deinterleaved); + edac_dbg(1, " Primary AddrMask: 0x%x\n", addr_mask); /* Register [31:1] = Address [39:9]. Size is in kBs here. */ - size = (addr_mask_deinterleaved >> 2) + 1; + size = calculate_cs_size(addr_mask, cs_mode); + + edac_dbg(1, " Secondary AddrMask: 0x%x\n", addr_mask_sec); + size += calculate_cs_size(addr_mask_sec, cs_mode); /* Return size in MBs. */ return size >> 10; @@ -1269,8 +1283,8 @@ static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { + u32 addr_mask = 0, addr_mask_sec = 0; int cs_mask_nr = csrow_nr; - u32 addr_mask_orig; int dimm, size = 0; /* No Chip Selects are enabled. */ @@ -1308,13 +1322,13 @@ static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, if (!pvt->flags.zn_regs_v2) cs_mask_nr >>= 1; - /* Asymmetric dual-rank DIMM support. */ - if ((csrow_nr & 1) && (cs_mode & CS_ODD_SECONDARY)) - addr_mask_orig = pvt->csels[umc].csmasks_sec[cs_mask_nr]; - else - addr_mask_orig = pvt->csels[umc].csmasks[cs_mask_nr]; + if (cs_mode & (CS_EVEN_PRIMARY | CS_ODD_PRIMARY)) + addr_mask = pvt->csels[umc].csmasks[cs_mask_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, dimm); + if (cs_mode & (CS_EVEN_SECONDARY | CS_ODD_SECONDARY)) + addr_mask_sec = pvt->csels[umc].csmasks_sec[cs_mask_nr]; + + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, dimm); } static void umc_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) @@ -3512,9 +3526,10 @@ static void gpu_get_err_info(struct mce *m, struct err_info *err) static int gpu_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { - u32 addr_mask_orig = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask_sec = pvt->csels[umc].csmasks_sec[csrow_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, csrow_nr >> 1); + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, csrow_nr >> 1); } static void gpu_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)

1 month

1
0
0 0

FAILED: patch "[PATCH] EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs" failed to apply to 5.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y git checkout FETCH_HEAD git cherry-pick -x a3f3040657417aeadb9622c629d4a0c2693a0f93 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025063027-delighted-selection-2dde@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From a3f3040657417aeadb9622c629d4a0c2693a0f93 Mon Sep 17 00:00:00 2001 From: Avadhut Naik <avadhut.naik(a)amd.com> Date: Thu, 29 May 2025 20:50:04 +0000 Subject: [PATCH] EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Each Chip-Select (CS) of a Unified Memory Controller (UMC) on AMD Zen-based SOCs has an Address Mask and a Secondary Address Mask register associated with it. The amd64_edac module logs DIMM sizes on a per-UMC per-CS granularity during init using these two registers. Currently, the module primarily considers only the Address Mask register for computing DIMM sizes. The Secondary Address Mask register is only considered for odd CS. Additionally, if it has been considered, the Address Mask register is ignored altogether for that CS. For power-of-two DIMMs i.e. DIMMs whose total capacity is a power of two (32GB, 64GB, etc), this is not an issue since only the Address Mask register is used. For non-power-of-two DIMMs i.e., DIMMs whose total capacity is not a power of two (48GB, 96GB, etc), however, the Secondary Address Mask register is used in conjunction with the Address Mask register. However, since the module only considers either of the two registers for a CS, the size computed by the module is incorrect. The Secondary Address Mask register is not considered for even CS, and the Address Mask register is not considered for odd CS. Introduce a new helper function so that both Address Mask and Secondary Address Mask registers are considered, when valid, for computing DIMM sizes. Furthermore, also rename some variables for greater clarity. Fixes: 81f5090db843 ("EDAC/amd64: Support asymmetric dual-rank DIMMs") Closes: https://lore.kernel.org/dbec22b6-00f2-498b-b70d-ab6f8a5ec87e@natrix.lt Reported-by: Žilvinas Žaltiena <zilvinas(a)natrix.lt> Signed-off-by: Avadhut Naik <avadhut.naik(a)amd.com> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Reviewed-by: Yazen Ghannam <yazen.ghannam(a)amd.com> Tested-by: Žilvinas Žaltiena <zilvinas(a)natrix.lt> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/20250529205013.403450-1-avadhut.naik@amd.com diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index b681c0663203..07f1e9dc1ca7 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -1209,7 +1209,9 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) if (csrow_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_PRIMARY; - /* Asymmetric dual-rank DIMM support. */ + if (csrow_sec_enabled(2 * dimm, ctrl, pvt)) + cs_mode |= CS_EVEN_SECONDARY; + if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt)) cs_mode |= CS_ODD_SECONDARY; @@ -1230,12 +1232,13 @@ static int umc_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) return cs_mode; } -static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, - int csrow_nr, int dimm) +static int calculate_cs_size(u32 mask, unsigned int cs_mode) { - u32 msb, weight, num_zero_bits; - u32 addr_mask_deinterleaved; - int size = 0; + int msb, weight, num_zero_bits; + u32 deinterleaved_mask; + + if (!mask) + return 0; /* * The number of zero bits in the mask is equal to the number of bits @@ -1248,19 +1251,30 @@ static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, * without swapping with the most significant bit. This can be handled * by keeping the MSB where it is and ignoring the single zero bit. */ - msb = fls(addr_mask_orig) - 1; - weight = hweight_long(addr_mask_orig); + msb = fls(mask) - 1; + weight = hweight_long(mask); num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE); /* Take the number of zero bits off from the top of the mask. */ - addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1); + deinterleaved_mask = GENMASK(msb - num_zero_bits, 1); + edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", deinterleaved_mask); + + return (deinterleaved_mask >> 2) + 1; +} + +static int __addr_mask_to_cs_size(u32 addr_mask, u32 addr_mask_sec, + unsigned int cs_mode, int csrow_nr, int dimm) +{ + int size; edac_dbg(1, "CS%d DIMM%d AddrMasks:\n", csrow_nr, dimm); - edac_dbg(1, " Original AddrMask: 0x%x\n", addr_mask_orig); - edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", addr_mask_deinterleaved); + edac_dbg(1, " Primary AddrMask: 0x%x\n", addr_mask); /* Register [31:1] = Address [39:9]. Size is in kBs here. */ - size = (addr_mask_deinterleaved >> 2) + 1; + size = calculate_cs_size(addr_mask, cs_mode); + + edac_dbg(1, " Secondary AddrMask: 0x%x\n", addr_mask_sec); + size += calculate_cs_size(addr_mask_sec, cs_mode); /* Return size in MBs. */ return size >> 10; @@ -1269,8 +1283,8 @@ static int __addr_mask_to_cs_size(u32 addr_mask_orig, unsigned int cs_mode, static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { + u32 addr_mask = 0, addr_mask_sec = 0; int cs_mask_nr = csrow_nr; - u32 addr_mask_orig; int dimm, size = 0; /* No Chip Selects are enabled. */ @@ -1308,13 +1322,13 @@ static int umc_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, if (!pvt->flags.zn_regs_v2) cs_mask_nr >>= 1; - /* Asymmetric dual-rank DIMM support. */ - if ((csrow_nr & 1) && (cs_mode & CS_ODD_SECONDARY)) - addr_mask_orig = pvt->csels[umc].csmasks_sec[cs_mask_nr]; - else - addr_mask_orig = pvt->csels[umc].csmasks[cs_mask_nr]; + if (cs_mode & (CS_EVEN_PRIMARY | CS_ODD_PRIMARY)) + addr_mask = pvt->csels[umc].csmasks[cs_mask_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, dimm); + if (cs_mode & (CS_EVEN_SECONDARY | CS_ODD_SECONDARY)) + addr_mask_sec = pvt->csels[umc].csmasks_sec[cs_mask_nr]; + + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, dimm); } static void umc_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) @@ -3512,9 +3526,10 @@ static void gpu_get_err_info(struct mce *m, struct err_info *err) static int gpu_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, unsigned int cs_mode, int csrow_nr) { - u32 addr_mask_orig = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask = pvt->csels[umc].csmasks[csrow_nr]; + u32 addr_mask_sec = pvt->csels[umc].csmasks_sec[csrow_nr]; - return __addr_mask_to_cs_size(addr_mask_orig, cs_mode, csrow_nr, csrow_nr >> 1); + return __addr_mask_to_cs_size(addr_mask, addr_mask_sec, cs_mode, csrow_nr, csrow_nr >> 1); } static void gpu_debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl)

1 month

1
0
0 0

[PATCH v2] arm64: dts: rockchip: use cs-gpios for spi1 on ringneck

by Jakob Unterwurzacher

From: Jakob Unterwurzacher <jakob.unterwurzacher(a)cherry.de> Hardware CS has a very slow rise time of about 6us, causing transmission errors when CS does not reach high between transaction. It looks like it's not driven actively when transitioning from low to high but switched to input, so only the CPU pull-up pulls it high, slowly. Transitions from high to low are fast. On the oscilloscope, CS looks like an irregular sawtooth pattern like this: _____ ^ / | ^ /| / | /| / | / | / | / | / | ___/ |___/ |_____/ |___ With cs-gpios we have a CS rise time of about 20ns, as it should be, and CS looks rectangular. This fixes the data errors when running a flashcp loop against a m25p40 spi flash. With the Rockchip 6.1 kernel we see the same slow rise time, but for some reason CS is always high for long enough to reach a solid high. The RK3399 and RK3588 SoCs use the same SPI driver, so we also checked our "Puma" (RK3399) and "Tiger" (RK3588) boards. They do not have this problem. Hardware CS rise time is good. Fixes: c484cf93f61b ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard") Cc: stable(a)vger.kernel.org Reviewed-by: Quentin Schulz <quentin.schulz(a)cherry.de> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher(a)cherry.de> --- v2: * Rename spi1_csn0_gpio -> spi1_csn0_gpio_pin to make CHECK_DTBS=y happy * Add pinctrl-names = "default"; v1: https://lore.kernel.org/all/20250620113549.2900285-1-jakob.unterwurzacher@c… .../boot/dts/rockchip/px30-ringneck.dtsi | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi index ab232e5c7ad6..4203b335a263 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -379,6 +379,18 @@ pmic_int: pmic-int { <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + spi1 { + spi1_csn0_gpio_pin: spi1-csn0-gpio-pin { + rockchip,pins = + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + + spi1_csn1_gpio_pin: spi1-csn1-gpio-pin { + rockchip,pins = + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; }; &pmu_io_domains { @@ -396,6 +408,17 @@ &sdmmc { vqmmc-supply = <&vccio_sd>; }; +&spi1 { + /* + * Hardware CS has a very slow rise time of about 6us, + * causing transmission errors. + * With cs-gpios we have a rise time of about 20ns. + */ + cs-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>, <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_clk &spi1_csn0_gpio_pin &spi1_csn1_gpio_pin &spi1_miso &spi1_mosi>; +}; + &tsadc { status = "okay"; }; -- 2.39.5

1 month

2
1
0 0

[PATCH v2 10/16] ext4: fix largest free orders lists corruption on mb_optimize_scan switch

by Baokun Li

The grp->bb_largest_free_order is updated regardless of whether mb_optimize_scan is enabled. This can lead to inconsistencies between grp->bb_largest_free_order and the actual s_mb_largest_free_orders list index when mb_optimize_scan is repeatedly enabled and disabled via remount. For example, if mb_optimize_scan is initially enabled, largest free order is 3, and the group is in s_mb_largest_free_orders[3]. Then, mb_optimize_scan is disabled via remount, block allocations occur, updating largest free order to 2. Finally, mb_optimize_scan is re-enabled via remount, more block allocations update largest free order to 1. At this point, the group would be removed from s_mb_largest_free_orders[3] under the protection of s_mb_largest_free_orders_locks[2]. This lock mismatch can lead to list corruption. To fix this, a new field bb_largest_free_order_idx is added to struct ext4_group_info to explicitly track the list index. Then still update bb_largest_free_order unconditionally, but only update bb_largest_free_order_idx when mb_optimize_scan is enabled. so that there is no inconsistency between the lock and the data to be protected. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable(a)vger.kernel.org Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/ext4/ext4.h | 1 + fs/ext4/mballoc.c | 35 ++++++++++++++++------------------- 2 files changed, 17 insertions(+), 19 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 003b8d3726e8..0e574378c6a3 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -3476,6 +3476,7 @@ struct ext4_group_info { int bb_avg_fragment_size_order; /* order of average fragment in BG */ ext4_grpblk_t bb_largest_free_order;/* order of largest frag in BG */ + ext4_grpblk_t bb_largest_free_order_idx; /* index of largest frag */ ext4_group_t bb_group; /* Group number */ struct list_head bb_prealloc_list; #ifdef DOUBLE_CHECK diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index e6d6c2da3c6e..dc82124f0905 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -1152,33 +1152,29 @@ static void mb_set_largest_free_order(struct super_block *sb, struct ext4_group_info *grp) { struct ext4_sb_info *sbi = EXT4_SB(sb); - int i; + int new, old = grp->bb_largest_free_order_idx; - for (i = MB_NUM_ORDERS(sb) - 1; i >= 0; i--) - if (grp->bb_counters[i] > 0) + for (new = MB_NUM_ORDERS(sb) - 1; new >= 0; new--) + if (grp->bb_counters[new] > 0) break; + + grp->bb_largest_free_order = new; /* No need to move between order lists? */ - if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || - i == grp->bb_largest_free_order) { - grp->bb_largest_free_order = i; + if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || new == old) return; - } - if (grp->bb_largest_free_order >= 0) { - write_lock(&sbi->s_mb_largest_free_orders_locks[ - grp->bb_largest_free_order]); + if (old >= 0) { + write_lock(&sbi->s_mb_largest_free_orders_locks[old]); list_del_init(&grp->bb_largest_free_order_node); - write_unlock(&sbi->s_mb_largest_free_orders_locks[ - grp->bb_largest_free_order]); + write_unlock(&sbi->s_mb_largest_free_orders_locks[old]); } - grp->bb_largest_free_order = i; - if (grp->bb_largest_free_order >= 0 && grp->bb_free) { - write_lock(&sbi->s_mb_largest_free_orders_locks[ - grp->bb_largest_free_order]); + + grp->bb_largest_free_order_idx = new; + if (new >= 0 && grp->bb_free) { + write_lock(&sbi->s_mb_largest_free_orders_locks[new]); list_add_tail(&grp->bb_largest_free_order_node, - &sbi->s_mb_largest_free_orders[grp->bb_largest_free_order]); - write_unlock(&sbi->s_mb_largest_free_orders_locks[ - grp->bb_largest_free_order]); + &sbi->s_mb_largest_free_orders[new]); + write_unlock(&sbi->s_mb_largest_free_orders_locks[new]); } } @@ -3391,6 +3387,7 @@ int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group, INIT_LIST_HEAD(&meta_group_info[i]->bb_avg_fragment_size_node); meta_group_info[i]->bb_largest_free_order = -1; /* uninit */ meta_group_info[i]->bb_avg_fragment_size_order = -1; /* uninit */ + meta_group_info[i]->bb_largest_free_order_idx = -1; /* uninit */ meta_group_info[i]->bb_group = group; mb_group_bb_bitmap_alloc(sb, meta_group_info[i], group); -- 2.46.1

1 month

2
2
0 0

[PATCH 0/2] Add dma-coherent for gs101 UFS dt node

by Peter Griffin

ufs-exynos driver enables the shareability option for gs101 which means the descriptors need to be allocated as cacheable. Fix the DT node and update bindings to add the dma-coherent property. This fixes the UFS stability issues we have seen with the upstream UFS driver. Note this DT fix can go in independently of the other UFS fixes series I sent recently [1], as the bootloader already leaves the sharability bits enabled. regards, Peter [1] https://lore.kernel.org/linux-scsi/20250226220414.343659-1-peter.griffin@li… To: André Draszik <andre.draszik(a)linaro.org> To: Tudor Ambarus <tudor.ambarus(a)linaro.org> To: Rob Herring <robh(a)kernel.org> To: Krzysztof Kozlowski <krzk+dt(a)kernel.org> To: Conor Dooley <conor+dt(a)kernel.org> To: Alim Akhtar <alim.akhtar(a)samsung.com> To: Avri Altman <avri.altman(a)wdc.com> To: Bart Van Assche <bvanassche(a)acm.org> To: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-samsung-soc(a)vger.kernel.org Cc: devicetree(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-scsi(a)vger.kernel.org Cc: kernel-team(a)android.com Cc: willmcvicker(a)google.com Signed-off-by: Peter Griffin <peter.griffin(a)linaro.org> --- Peter Griffin (2): arm64: dts: exynos: gs101: ufs: add dma-coherent property scsi: ufs: dt-bindings: exynos: add dma-coherent property for gs101 Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml | 2 ++ arch/arm64/boot/dts/exynos/google/gs101.dtsi | 1 + 2 files changed, 3 insertions(+) --- base-commit: b323d8e7bc03d27dec646bfdccb7d1a92411f189 change-id: 20250314-ufs-dma-coherent-980f2467690d Best regards, -- Peter Griffin <peter.griffin(a)linaro.org>

1 month

6
13
0 0

[PATCH v2 09/16] ext4: fix zombie groups in average fragment size lists

by Baokun Li

Groups with no free blocks shouldn't be in any average fragment size list. However, when all blocks in a group are allocated(i.e., bb_fragments or bb_free is 0), we currently skip updating the average fragment size, which means the group isn't removed from its previous s_mb_avg_fragment_size[old] list. This created "zombie" groups that were always skipped during traversal as they couldn't satisfy any block allocation requests, negatively impacting traversal efficiency. Therefore, when a group becomes completely free, bb_avg_fragment_size_order is now set to -1. If the old order was not -1, a removal operation is performed; if the new order is not -1, an insertion is performed. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable(a)vger.kernel.org Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/ext4/mballoc.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 94950b07a577..e6d6c2da3c6e 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -841,30 +841,30 @@ static void mb_update_avg_fragment_size(struct super_block *sb, struct ext4_group_info *grp) { struct ext4_sb_info *sbi = EXT4_SB(sb); - int new_order; + int new, old; - if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || grp->bb_fragments == 0) + if (!test_opt2(sb, MB_OPTIMIZE_SCAN)) return; - new_order = mb_avg_fragment_size_order(sb, - grp->bb_free / grp->bb_fragments); - if (new_order == grp->bb_avg_fragment_size_order) + old = grp->bb_avg_fragment_size_order; + new = grp->bb_fragments == 0 ? -1 : + mb_avg_fragment_size_order(sb, grp->bb_free / grp->bb_fragments); + if (new == old) return; - if (grp->bb_avg_fragment_size_order != -1) { - write_lock(&sbi->s_mb_avg_fragment_size_locks[ - grp->bb_avg_fragment_size_order]); + if (old >= 0) { + write_lock(&sbi->s_mb_avg_fragment_size_locks[old]); list_del(&grp->bb_avg_fragment_size_node); - write_unlock(&sbi->s_mb_avg_fragment_size_locks[ - grp->bb_avg_fragment_size_order]); - } - grp->bb_avg_fragment_size_order = new_order; - write_lock(&sbi->s_mb_avg_fragment_size_locks[ - grp->bb_avg_fragment_size_order]); - list_add_tail(&grp->bb_avg_fragment_size_node, - &sbi->s_mb_avg_fragment_size[grp->bb_avg_fragment_size_order]); - write_unlock(&sbi->s_mb_avg_fragment_size_locks[ - grp->bb_avg_fragment_size_order]); + write_unlock(&sbi->s_mb_avg_fragment_size_locks[old]); + } + + grp->bb_avg_fragment_size_order = new; + if (new >= 0) { + write_lock(&sbi->s_mb_avg_fragment_size_locks[new]); + list_add_tail(&grp->bb_avg_fragment_size_node, + &sbi->s_mb_avg_fragment_size[new]); + write_unlock(&sbi->s_mb_avg_fragment_size_locks[new]); + } } /* -- 2.46.1

1 month

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2025