June 2025 - Linux-stable-mirror

[PATCH v1 3/4] mpi3mr: Serialize admin queue BAR writes on 32-bit systems

by Ranjan Kumar

On 32-bit systems, 64-bit BAR writes to admin queue registers are performed as two 32-bit writes. Without locking, this can cause partial writes when accessed concurrently. Updated per-queue spinlocks is used to serialize these writes and prevent race conditions. Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Cc: stable(a)vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar(a)broadcom.com> --- drivers/scsi/mpi3mr/mpi3mr.h | 4 ++++ drivers/scsi/mpi3mr/mpi3mr_fw.c | 15 +++++++++++---- drivers/scsi/mpi3mr/mpi3mr_os.c | 2 ++ 3 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/mpi3mr/mpi3mr.h b/drivers/scsi/mpi3mr/mpi3mr.h index bf272dd69d23..f2201108ea91 100644 --- a/drivers/scsi/mpi3mr/mpi3mr.h +++ b/drivers/scsi/mpi3mr/mpi3mr.h @@ -1137,6 +1137,8 @@ struct scmd_priv { * @logdata_buf: Circular buffer to store log data entries * @logdata_buf_idx: Index of entry in buffer to store * @logdata_entry_sz: log data entry size + * @adm_req_q_bar_writeq_lock: Admin request queue lock + * @adm_reply_q_bar_writeq_lock: Admin reply queue lock * @pend_large_data_sz: Counter to track pending large data * @io_throttle_data_length: I/O size to track in 512b blocks * @io_throttle_high: I/O size to start throttle in 512b blocks @@ -1339,6 +1341,8 @@ struct mpi3mr_ioc { u8 *logdata_buf; u16 logdata_buf_idx; u16 logdata_entry_sz; + spinlock_t adm_req_q_bar_writeq_lock; + spinlock_t adm_reply_q_bar_writeq_lock; atomic_t pend_large_data_sz; u32 io_throttle_data_length; diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index 8976582946a2..0152d31d430a 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -23,17 +23,22 @@ module_param(poll_queues, int, 0444); MODULE_PARM_DESC(poll_queues, "Number of queues for io_uring poll mode. (Range 1 - 126)"); #if defined(writeq) && defined(CONFIG_64BIT) -static inline void mpi3mr_writeq(__u64 b, void __iomem *addr) +static inline void mpi3mr_writeq(__u64 b, void __iomem *addr, + spinlock_t *write_queue_lock) { writeq(b, addr); } #else -static inline void mpi3mr_writeq(__u64 b, void __iomem *addr) +static inline void mpi3mr_writeq(__u64 b, void __iomem *addr, + spinlock_t *write_queue_lock) { __u64 data_out = b; + unsigned long flags; + spin_lock_irqsave(write_queue_lock, flags); writel((u32)(data_out), addr); writel((u32)(data_out >> 32), (addr + 4)); + spin_unlock_irqrestore(write_queue_lock, flags); } #endif @@ -2954,9 +2959,11 @@ static int mpi3mr_setup_admin_qpair(struct mpi3mr_ioc *mrioc) (mrioc->num_admin_req); writel(num_admin_entries, &mrioc->sysif_regs->admin_queue_num_entries); mpi3mr_writeq(mrioc->admin_req_dma, - &mrioc->sysif_regs->admin_request_queue_address); + &mrioc->sysif_regs->admin_request_queue_address, + &mrioc->adm_req_q_bar_writeq_lock); mpi3mr_writeq(mrioc->admin_reply_dma, - &mrioc->sysif_regs->admin_reply_queue_address); + &mrioc->sysif_regs->admin_reply_queue_address, + &mrioc->adm_reply_q_bar_writeq_lock); writel(mrioc->admin_req_pi, &mrioc->sysif_regs->admin_request_queue_pi); writel(mrioc->admin_reply_ci, &mrioc->sysif_regs->admin_reply_queue_ci); return retval; diff --git a/drivers/scsi/mpi3mr/mpi3mr_os.c b/drivers/scsi/mpi3mr/mpi3mr_os.c index ce444efd859e..0d1c9bbb13b5 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_os.c +++ b/drivers/scsi/mpi3mr/mpi3mr_os.c @@ -5365,6 +5365,8 @@ mpi3mr_probe(struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init(&mrioc->tgtdev_lock); spin_lock_init(&mrioc->watchdog_lock); spin_lock_init(&mrioc->chain_buf_lock); + spin_lock_init(&mrioc->adm_req_q_bar_writeq_lock); + spin_lock_init(&mrioc->adm_reply_q_bar_writeq_lock); spin_lock_init(&mrioc->sas_node_lock); spin_lock_init(&mrioc->trigger_lock); -- 2.31.1

1 month, 2 weeks

1
0
0 0

[PATCH v1 1/4] mpi3mr: Fix race between config read submit and interrupt completion

by Ranjan Kumar

The "is_waiting" flag was updated after calling complete(), which could lead to a race where the waiting thread wakes up before the flag is cleared, may cause a missed wakeup or stale state check. Reorder the operations to update "is_waiting" before signaling completion to ensure consistent state. Fixes: 824a156633df ("scsi: mpi3mr: Base driver code") Cc: stable(a)vger.kernel.org Signed-off-by: Chandrakanth Patil <chandrakanth.patil(a)broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar(a)broadcom.com> --- drivers/scsi/mpi3mr/mpi3mr_fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpi3mr/mpi3mr_fw.c b/drivers/scsi/mpi3mr/mpi3mr_fw.c index 1d7901a8f0e4..0186676698d4 100644 --- a/drivers/scsi/mpi3mr/mpi3mr_fw.c +++ b/drivers/scsi/mpi3mr/mpi3mr_fw.c @@ -428,8 +428,8 @@ static void mpi3mr_process_admin_reply_desc(struct mpi3mr_ioc *mrioc, MPI3MR_SENSE_BUF_SZ); } if (cmdptr->is_waiting) { - complete(&cmdptr->done); cmdptr->is_waiting = 0; + complete(&cmdptr->done); } else if (cmdptr->callback) cmdptr->callback(mrioc, cmdptr); } -- 2.31.1

1 month, 2 weeks

1
0
0 0

FAILED: patch "[PATCH] io_uring/zcrx: fix area release on registration failure" failed to apply to 6.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.15.y git checkout FETCH_HEAD git cherry-pick -x 0ec33c81d9c7342f03864101ddb2e717a0cce03e # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062018-ahead-armory-59ac@gregkh' --subject-prefix 'PATCH 6.15.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 0ec33c81d9c7342f03864101ddb2e717a0cce03e Mon Sep 17 00:00:00 2001 From: Pavel Begunkov <asml.silence(a)gmail.com> Date: Tue, 27 May 2025 18:07:33 +0100 Subject: [PATCH] io_uring/zcrx: fix area release on registration failure On area registration failure there might be no ifq set and it's not safe to access area->ifq in the release path without checking it first. Cc: stable(a)vger.kernel.org Fixes: f12ecf5e1c5ec ("io_uring/zcrx: fix late dma unmap for a dead dev") Signed-off-by: Pavel Begunkov <asml.silence(a)gmail.com> Link: https://lore.kernel.org/r/bc02878678a5fec28bc77d33355cdba735418484.17483656… Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/io_uring/zcrx.c b/io_uring/zcrx.c index 0c5b7d8f8d67..21c816c3bfe0 100644 --- a/io_uring/zcrx.c +++ b/io_uring/zcrx.c @@ -366,7 +366,8 @@ static void io_free_rbuf_ring(struct io_zcrx_ifq *ifq) static void io_zcrx_free_area(struct io_zcrx_area *area) { - io_zcrx_unmap_area(area->ifq, area); + if (area->ifq) + io_zcrx_unmap_area(area->ifq, area); io_release_area_mem(&area->mem); kvfree(area->freelist);

1 month, 2 weeks

2
1
0 0

[PATCH v3] Bluetooth: HCI: Set extended advertising data synchronously

by Christian Eggers

Currently, for controllers with extended advertising, the advertising data is set in the asynchronous response handler for extended adverstising params. As most advertising settings are performed in a synchronous context, the (asynchronous) setting of the advertising data is done too late (after enabling the advertising). Move setting of adverstising data from asynchronous response handler into synchronous context to fix ordering of HCI commands. Signed-off-by: Christian Eggers <ceggers(a)arri.de> Fixes: a0fb3726ba55 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Cc: stable(a)vger.kernel.org v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri… --- v3: refactor: store adv_addr_type/tx_power within hci_set_ext_adv_params_sync() v2: convert setting of adv data into synchronous context (rather than moving more methods into asynchronous response handlers). - hci_set_ext_adv_params_sync: new method - hci_set_ext_adv_data_sync: move within source file (no changes) - hci_set_adv_data_sync: dito - hci_update_adv_data_sync: dito - hci_cc_set_ext_adv_param: remove (performed synchronously now) net/bluetooth/hci_event.c | 36 ------- net/bluetooth/hci_sync.c | 207 ++++++++++++++++++++++++-------------- 2 files changed, 130 insertions(+), 113 deletions(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 66052d6aaa1d..4d5ace9d245d 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2150,40 +2150,6 @@ static u8 hci_cc_set_adv_param(struct hci_dev *hdev, void *data, return rp->status; } -static u8 hci_cc_set_ext_adv_param(struct hci_dev *hdev, void *data, - struct sk_buff *skb) -{ - struct hci_rp_le_set_ext_adv_params *rp = data; - struct hci_cp_le_set_ext_adv_params *cp; - struct adv_info *adv_instance; - - bt_dev_dbg(hdev, "status 0x%2.2x", rp->status); - - if (rp->status) - return rp->status; - - cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS); - if (!cp) - return rp->status; - - hci_dev_lock(hdev); - hdev->adv_addr_type = cp->own_addr_type; - if (!cp->handle) { - /* Store in hdev for instance 0 */ - hdev->adv_tx_power = rp->tx_power; - } else { - adv_instance = hci_find_adv_instance(hdev, cp->handle); - if (adv_instance) - adv_instance->tx_power = rp->tx_power; - } - /* Update adv data as tx power is known now */ - hci_update_adv_data(hdev, cp->handle); - - hci_dev_unlock(hdev); - - return rp->status; -} - static u8 hci_cc_read_rssi(struct hci_dev *hdev, void *data, struct sk_buff *skb) { @@ -4164,8 +4130,6 @@ static const struct hci_cc { HCI_CC(HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS, hci_cc_le_read_num_adv_sets, sizeof(struct hci_rp_le_read_num_supported_adv_sets)), - HCI_CC(HCI_OP_LE_SET_EXT_ADV_PARAMS, hci_cc_set_ext_adv_param, - sizeof(struct hci_rp_le_set_ext_adv_params)), HCI_CC_STATUS(HCI_OP_LE_SET_EXT_ADV_ENABLE, hci_cc_le_set_ext_adv_enable), HCI_CC_STATUS(HCI_OP_LE_SET_ADV_SET_RAND_ADDR, diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 1f8806dfa556..563614b53485 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -1205,9 +1205,126 @@ static int hci_set_adv_set_random_addr_sync(struct hci_dev *hdev, u8 instance, sizeof(cp), &cp, HCI_CMD_TIMEOUT); } +static int +hci_set_ext_adv_params_sync(struct hci_dev *hdev, struct adv_info *adv, + const struct hci_cp_le_set_ext_adv_params *cp, + struct hci_rp_le_set_ext_adv_params *rp) +{ + struct sk_buff *skb; + + skb = __hci_cmd_sync(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS, sizeof(*cp), + cp, HCI_CMD_TIMEOUT); + + /* If command return a status event, skb will be set to -ENODATA */ + if (skb == ERR_PTR(-ENODATA)) + return 0; + + if (IS_ERR(skb)) { + bt_dev_err(hdev, "Opcode 0x%4.4x failed: %ld", + HCI_OP_LE_SET_EXT_ADV_PARAMS, PTR_ERR(skb)); + return PTR_ERR(skb); + } + + if (skb->len != sizeof(*rp)) { + bt_dev_err(hdev, "Invalid response length for " + "HCI_OP_LE_SET_EXT_ADV_PARAMS: %u", skb->len); + kfree_skb(skb); + return -EIO; + } + + memcpy(rp, skb->data, sizeof(*rp)); + kfree_skb(skb); + + if (!rp->status) { + hdev->adv_addr_type = cp->own_addr_type; + if (!cp->handle) { + /* Store in hdev for instance 0 */ + hdev->adv_tx_power = rp->tx_power; + } else if (adv) { + adv->tx_power = rp->tx_power; + } + } + + return rp->status; +} + +static int hci_set_ext_adv_data_sync(struct hci_dev *hdev, u8 instance) +{ + DEFINE_FLEX(struct hci_cp_le_set_ext_adv_data, pdu, data, length, + HCI_MAX_EXT_AD_LENGTH); + u8 len; + struct adv_info *adv = NULL; + int err; + + if (instance) { + adv = hci_find_adv_instance(hdev, instance); + if (!adv || !adv->adv_data_changed) + return 0; + } + + len = eir_create_adv_data(hdev, instance, pdu->data, + HCI_MAX_EXT_AD_LENGTH); + + pdu->length = len; + pdu->handle = adv ? adv->handle : instance; + pdu->operation = LE_SET_ADV_DATA_OP_COMPLETE; + pdu->frag_pref = LE_SET_ADV_DATA_NO_FRAG; + + err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_DATA, + struct_size(pdu, data, len), pdu, + HCI_CMD_TIMEOUT); + if (err) + return err; + + /* Update data if the command succeed */ + if (adv) { + adv->adv_data_changed = false; + } else { + memcpy(hdev->adv_data, pdu->data, len); + hdev->adv_data_len = len; + } + + return 0; +} + +static int hci_set_adv_data_sync(struct hci_dev *hdev, u8 instance) +{ + struct hci_cp_le_set_adv_data cp; + u8 len; + + memset(&cp, 0, sizeof(cp)); + + len = eir_create_adv_data(hdev, instance, cp.data, sizeof(cp.data)); + + /* There's nothing to do if the data hasn't changed */ + if (hdev->adv_data_len == len && + memcmp(cp.data, hdev->adv_data, len) == 0) + return 0; + + memcpy(hdev->adv_data, cp.data, sizeof(cp.data)); + hdev->adv_data_len = len; + + cp.length = len; + + return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_DATA, + sizeof(cp), &cp, HCI_CMD_TIMEOUT); +} + +int hci_update_adv_data_sync(struct hci_dev *hdev, u8 instance) +{ + if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) + return 0; + + if (ext_adv_capable(hdev)) + return hci_set_ext_adv_data_sync(hdev, instance); + + return hci_set_adv_data_sync(hdev, instance); +} + int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) { struct hci_cp_le_set_ext_adv_params cp; + struct hci_rp_le_set_ext_adv_params rp; bool connectable; u32 flags; bdaddr_t random_addr; @@ -1316,8 +1433,12 @@ int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) cp.secondary_phy = HCI_ADV_PHY_1M; } - err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); + err = hci_set_ext_adv_params_sync(hdev, adv, &cp, &rp); + if (err) + return err; + + /* Update adv data as tx power is known now */ + err = hci_set_ext_adv_data_sync(hdev, cp.handle); if (err) return err; @@ -1822,79 +1943,6 @@ int hci_le_terminate_big_sync(struct hci_dev *hdev, u8 handle, u8 reason) sizeof(cp), &cp, HCI_CMD_TIMEOUT); } -static int hci_set_ext_adv_data_sync(struct hci_dev *hdev, u8 instance) -{ - DEFINE_FLEX(struct hci_cp_le_set_ext_adv_data, pdu, data, length, - HCI_MAX_EXT_AD_LENGTH); - u8 len; - struct adv_info *adv = NULL; - int err; - - if (instance) { - adv = hci_find_adv_instance(hdev, instance); - if (!adv || !adv->adv_data_changed) - return 0; - } - - len = eir_create_adv_data(hdev, instance, pdu->data, - HCI_MAX_EXT_AD_LENGTH); - - pdu->length = len; - pdu->handle = adv ? adv->handle : instance; - pdu->operation = LE_SET_ADV_DATA_OP_COMPLETE; - pdu->frag_pref = LE_SET_ADV_DATA_NO_FRAG; - - err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_DATA, - struct_size(pdu, data, len), pdu, - HCI_CMD_TIMEOUT); - if (err) - return err; - - /* Update data if the command succeed */ - if (adv) { - adv->adv_data_changed = false; - } else { - memcpy(hdev->adv_data, pdu->data, len); - hdev->adv_data_len = len; - } - - return 0; -} - -static int hci_set_adv_data_sync(struct hci_dev *hdev, u8 instance) -{ - struct hci_cp_le_set_adv_data cp; - u8 len; - - memset(&cp, 0, sizeof(cp)); - - len = eir_create_adv_data(hdev, instance, cp.data, sizeof(cp.data)); - - /* There's nothing to do if the data hasn't changed */ - if (hdev->adv_data_len == len && - memcmp(cp.data, hdev->adv_data, len) == 0) - return 0; - - memcpy(hdev->adv_data, cp.data, sizeof(cp.data)); - hdev->adv_data_len = len; - - cp.length = len; - - return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_DATA, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); -} - -int hci_update_adv_data_sync(struct hci_dev *hdev, u8 instance) -{ - if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) - return 0; - - if (ext_adv_capable(hdev)) - return hci_set_ext_adv_data_sync(hdev, instance); - - return hci_set_adv_data_sync(hdev, instance); -} - int hci_schedule_adv_instance_sync(struct hci_dev *hdev, u8 instance, bool force) { @@ -6269,6 +6317,7 @@ static int hci_le_ext_directed_advertising_sync(struct hci_dev *hdev, struct hci_conn *conn) { struct hci_cp_le_set_ext_adv_params cp; + struct hci_rp_le_set_ext_adv_params rp; int err; bdaddr_t random_addr; u8 own_addr_type; @@ -6310,8 +6359,12 @@ static int hci_le_ext_directed_advertising_sync(struct hci_dev *hdev, if (err) return err; - err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); + err = hci_set_ext_adv_params_sync(hdev, NULL, &cp, &rp); + if (err) + return err; + + /* Update adv data as tx power is known now */ + err = hci_set_ext_adv_data_sync(hdev, cp.handle); if (err) return err; -- 2.44.1

1 month, 2 weeks

2
2
0 0

[PATCH 4/4] xhci: dbc: Flush queued requests before stopping dbc

by Mathias Nyman

Flush dbc requests when dbc is stopped and transfer rings are freed. Failure to flush them lead to leaking memory and dbc completing odd requests after resuming from suspend, leading to error messages such as: [ 95.344392] xhci_hcd 0000:00:0d.0: no matched request Cc: stable(a)vger.kernel.org Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-dbgcap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 0d4ce5734165..06a2edb9e86e 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -652,6 +652,10 @@ static void xhci_dbc_stop(struct xhci_dbc *dbc) case DS_DISABLED: return; case DS_CONFIGURED: + spin_lock(&dbc->lock); + xhci_dbc_flush_requests(dbc); + spin_unlock(&dbc->lock); + if (dbc->driver->disconnect) dbc->driver->disconnect(dbc); break; -- 2.43.0

1 month, 2 weeks

1
0
0 0

[PATCH 3/4] xhci: dbctty: disable ECHO flag by default

by Mathias Nyman

From: Łukasz Bartosik <ukaszb(a)chromium.org> When /dev/ttyDBC0 device is created then by default ECHO flag is set for the terminal device. However if data arrives from a peer before application using /dev/ttyDBC0 applies its set of terminal flags then the arriving data will be echoed which might not be desired behavior. Fixes: 4521f1613940 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.") Cc: stable(a)vger.kernel.org Signed-off-by: Łukasz Bartosik <ukaszb(a)chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-dbgtty.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-dbgtty.c b/drivers/usb/host/xhci-dbgtty.c index 60ed753c85bb..d894081d8d15 100644 --- a/drivers/usb/host/xhci-dbgtty.c +++ b/drivers/usb/host/xhci-dbgtty.c @@ -617,6 +617,7 @@ int dbc_tty_init(void) dbc_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; dbc_tty_driver->subtype = SERIAL_TYPE_NORMAL; dbc_tty_driver->init_termios = tty_std_termios; + dbc_tty_driver->init_termios.c_lflag &= ~ECHO; dbc_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; dbc_tty_driver->init_termios.c_ispeed = 9600; -- 2.43.0

1 month, 2 weeks

1
0
0 0

[PATCH 2/4] xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS

by Mathias Nyman

From: Hongyu Xie <xiehongyu1(a)kylinos.cn> Disable stream for platform xHC controller with broken stream. Fixes: 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable") Cc: stable(a)vger.kernel.org # 5.4 Signed-off-by: Hongyu Xie <xiehongyu1(a)kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-plat.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 6dab142e7278..c79d5ed48a08 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -328,7 +328,8 @@ int xhci_plat_probe(struct platform_device *pdev, struct device *sysdev, const s } usb3_hcd = xhci_get_usb3_hcd(xhci); - if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4) + if (usb3_hcd && HCC_MAX_PSA(xhci->hcc_params) >= 4 && + !(xhci->quirks & XHCI_BROKEN_STREAMS)) usb3_hcd->can_do_streams = 1; if (xhci->shared_hcd) { -- 2.43.0

1 month, 2 weeks

1
0
0 0

[PATCH 1/4] usb: xhci: quirk for data loss in ISOC transfers

by Mathias Nyman

From: Raju Rangoju <Raju.Rangoju(a)amd.com> During the High-Speed Isochronous Audio transfers, xHCI controller on certain AMD platforms experiences momentary data loss. This results in Missed Service Errors (MSE) being generated by the xHCI. The root cause of the MSE is attributed to the ISOC OUT endpoint being omitted from scheduling. This can happen when an IN endpoint with a 64ms service interval either is pre-scheduled prior to the ISOC OUT endpoint or the interval of the ISOC OUT endpoint is shorter than that of the IN endpoint. Consequently, the OUT service is neglected when an IN endpoint with a service interval exceeding 32ms is scheduled concurrently (every 64ms in this scenario). This issue is particularly seen on certain older AMD platforms. To mitigate this problem, it is recommended to adjust the service interval of the IN endpoint to not exceed 32ms (interval 8). This adjustment ensures that the OUT endpoint will not be bypassed, even if a smaller interval value is utilized. Cc: stable(a)vger.kernel.org Signed-off-by: Raju Rangoju <Raju.Rangoju(a)amd.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/host/xhci-mem.c | 4 ++++ drivers/usb/host/xhci-pci.c | 25 +++++++++++++++++++++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 30 insertions(+) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bd745a0f2f78..6680afa4f596 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1449,6 +1449,10 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, /* Periodic endpoint bInterval limit quirk */ if (usb_endpoint_xfer_int(&ep->desc) || usb_endpoint_xfer_isoc(&ep->desc)) { + if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_9) && + interval >= 9) { + interval = 8; + } if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) && udev->speed >= USB_SPEED_HIGH && interval >= 7) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 0c481cbc8f08..00fac8b233d2 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -71,12 +71,22 @@ #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI 0x15ec #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI 0x15f0 +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI 0x13ed +#define PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI 0x13ee +#define PCI_DEVICE_ID_AMD_STARSHIP_XHCI 0x148c +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI 0x15d4 +#define PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI 0x15d5 +#define PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI 0x15e0 +#define PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI 0x15e1 +#define PCI_DEVICE_ID_AMD_RAVEN2_XHCI 0x15e5 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc +#define PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI 0x7316 + #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI 0x1042 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI 0x1242 @@ -280,6 +290,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; + if (pdev->vendor == PCI_VENDOR_ID_AMD && + (pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEC_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_ARIEL_TYPEA_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_STARSHIP_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D4_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_FIREFLIGHT_15D5_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E0_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI || + pdev->device == PCI_DEVICE_ID_AMD_RAVEN2_XHCI)) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + + if (pdev->vendor == PCI_VENDOR_ID_ATI && + pdev->device == PCI_DEVICE_ID_ATI_NAVI10_7316_XHCI) + xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_9; + if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96) xhci->quirks |= XHCI_AMD_0x96_HOST; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index fa1ea0e0c7fb..a20f4e7cd43a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1643,6 +1643,7 @@ struct xhci_hcd { #define XHCI_WRITE_64_HI_LO BIT_ULL(47) #define XHCI_CDNS_SCTX_QUIRK BIT_ULL(48) #define XHCI_ETRON_HOST BIT_ULL(49) +#define XHCI_LIMIT_ENDPOINT_INTERVAL_9 BIT_ULL(50) unsigned int num_active_eps; unsigned int limit_active_eps; -- 2.43.0

1 month, 2 weeks

1
0
0 0

Re: [PATCH v5] virtio_blk: Fix disk deletion hang on device surprise removal

by Stefan Hajnoczi

On Mon, Jun 02, 2025 at 02:44:33AM +0000, Parav Pandit wrote: > When the PCI device is surprise removed, requests may not complete > the device as the VQ is marked as broken. Due to this, the disk > deletion hangs. There are loops in the core virtio driver code that expect device register reads to eventually return 0: drivers/virtio/virtio_pci_modern.c:vp_reset() drivers/virtio/virtio_pci_modern_dev.c:vp_modern_set_queue_reset() Is there a hang if these loops are hit when a device has been surprise removed? I'm trying to understand whether surprise removal is fully supported or whether this patch is one step in that direction. Apart from that, I'm happy with the virtio_blk.c aspects of the patch: Reviewed-by: Stefan Hajnoczi <stefanha(a)redhat.com> > > Fix it by aborting the requests when the VQ is broken. > > With this fix now fio completes swiftly. > An alternative of IO timeout has been considered, however > when the driver knows about unresponsive block device, swiftly clearing > them enables users and upper layers to react quickly. > > Verified with multiple device unplug iterations with pending requests in > virtio used ring and some pending with the device. > > Fixes: 43bb40c5b926 ("virtio_pci: Support surprise removal of virtio pci device") > Cc: stable(a)vger.kernel.org > Reported-by: Li RongQing <lirongqing(a)baidu.com> > Closes: https://lore.kernel.org/virtualization/c45dd68698cd47238c55fb73ca9b4741@bai… > Reviewed-by: Max Gurtovoy <mgurtovoy(a)nvidia.com> > Reviewed-by: Israel Rukshin <israelr(a)nvidia.com> > Signed-off-by: Parav Pandit <parav(a)nvidia.com> > > --- > v4->v5: > - fixed comment style where comment to start with one empty line at start > - Addressed comments from Alok > - fixed typo in broken vq check > v3->v4: > - Addressed comments from Michael > - renamed virtblk_request_cancel() to > virtblk_complete_request_with_ioerr() > - Added comments for virtblk_complete_request_with_ioerr() > - Renamed virtblk_broken_device_cleanup() to > virtblk_cleanup_broken_device() > - Added comments for virtblk_cleanup_broken_device() > - Moved the broken vq check in virtblk_remove() > - Fixed comment style to have first empty line > - replaced freezed to frozen > - Fixed comments rephrased > > v2->v3: > - Addressed comments from Michael > - updated comment for synchronizing with callbacks > > v1->v2: > - Addressed comments from Stephan > - fixed spelling to 'waiting' > - Addressed comments from Michael > - Dropped checking broken vq from queue_rq() and queue_rqs() > because it is checked in lower layer routines in virtio core > > v0->v1: > - Fixed comments from Stefan to rename a cleanup function > - Improved logic for handling any outstanding requests > in bio layer > - improved cancel callback to sync with ongoing done() > --- > drivers/block/virtio_blk.c | 95 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 95 insertions(+) > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c > index 7cffea01d868..c5e383c0ac48 100644 > --- a/drivers/block/virtio_blk.c > +++ b/drivers/block/virtio_blk.c > @@ -1554,6 +1554,98 @@ static int virtblk_probe(struct virtio_device *vdev) > return err; > } > > +/* > + * If the vq is broken, device will not complete requests. > + * So we do it for the device. > + */ > +static bool virtblk_complete_request_with_ioerr(struct request *rq, void *data) > +{ > + struct virtblk_req *vbr = blk_mq_rq_to_pdu(rq); > + struct virtio_blk *vblk = data; > + struct virtio_blk_vq *vq; > + unsigned long flags; > + > + vq = &vblk->vqs[rq->mq_hctx->queue_num]; > + > + spin_lock_irqsave(&vq->lock, flags); > + > + vbr->in_hdr.status = VIRTIO_BLK_S_IOERR; > + if (blk_mq_request_started(rq) && !blk_mq_request_completed(rq)) > + blk_mq_complete_request(rq); > + > + spin_unlock_irqrestore(&vq->lock, flags); > + return true; > +} > + > +/* > + * If the device is broken, it will not use any buffers and waiting > + * for that to happen is pointless. We'll do the cleanup in the driver, > + * completing all requests for the device. > + */ > +static void virtblk_cleanup_broken_device(struct virtio_blk *vblk) > +{ > + struct request_queue *q = vblk->disk->queue; > + > + /* > + * Start freezing the queue, so that new requests keeps waiting at the > + * door of bio_queue_enter(). We cannot fully freeze the queue because > + * frozen queue is an empty queue and there are pending requests, so > + * only start freezing it. > + */ > + blk_freeze_queue_start(q); > + > + /* > + * When quiescing completes, all ongoing dispatches have completed > + * and no new dispatch will happen towards the driver. > + */ > + blk_mq_quiesce_queue(q); > + > + /* > + * Synchronize with any ongoing VQ callbacks that may have started > + * before the VQs were marked as broken. Any outstanding requests > + * will be completed by virtblk_complete_request_with_ioerr(). > + */ > + virtio_synchronize_cbs(vblk->vdev); > + > + /* > + * At this point, no new requests can enter the queue_rq() and > + * completion routine will not complete any new requests either for the > + * broken vq. Hence, it is safe to cancel all requests which are > + * started. > + */ > + blk_mq_tagset_busy_iter(&vblk->tag_set, > + virtblk_complete_request_with_ioerr, vblk); > + blk_mq_tagset_wait_completed_request(&vblk->tag_set); > + > + /* > + * All pending requests are cleaned up. Time to resume so that disk > + * deletion can be smooth. Start the HW queues so that when queue is > + * unquiesced requests can again enter the driver. > + */ > + blk_mq_start_stopped_hw_queues(q, true); > + > + /* > + * Unquiescing will trigger dispatching any pending requests to the > + * driver which has crossed bio_queue_enter() to the driver. > + */ > + blk_mq_unquiesce_queue(q); > + > + /* > + * Wait for all pending dispatches to terminate which may have been > + * initiated after unquiescing. > + */ > + blk_mq_freeze_queue_wait(q); > + > + /* > + * Mark the disk dead so that once we unfreeze the queue, requests > + * waiting at the door of bio_queue_enter() can be aborted right away. > + */ > + blk_mark_disk_dead(vblk->disk); > + > + /* Unfreeze the queue so that any waiting requests will be aborted. */ > + blk_mq_unfreeze_queue_nomemrestore(q); > +} > + > static void virtblk_remove(struct virtio_device *vdev) > { > struct virtio_blk *vblk = vdev->priv; > @@ -1561,6 +1653,9 @@ static void virtblk_remove(struct virtio_device *vdev) > /* Make sure no work handler is accessing the device. */ > flush_work(&vblk->config_work); > > + if (virtqueue_is_broken(vblk->vqs[0].vq)) > + virtblk_cleanup_broken_device(vblk); > + > del_gendisk(vblk->disk); > blk_mq_free_tag_set(&vblk->tag_set); > > -- > 2.34.1 >

1 month, 2 weeks

4
20
0 0

[PATCH v3 0/3] Samsung Exynos 7870 DECON driver support

by Kaustabh Chakraborty

This patch series aims at adding support for Exynos7870's DECON in the Exynos7 DECON driver. It introduces a driver data struct so that support for DECON on other SoCs can be added to it in the future. It also fixes a few bugs in the driver, such as functions receiving bad pointers. Tested on Samsung Galaxy J7 Prime (samsung-on7xelte), Samsung Galaxy A2 Core (samsung-a2corelte), and Samsung Galaxy J6 (samsung-j6lte). Signed-off-by: Kaustabh Chakraborty <kauschluss(a)disroot.org> --- Changes in v3: - Add a new commit documenting iommus and ports dt properties. - Link to v2: https://lore.kernel.org/r/20250612-exynosdrm-decon-v2-0-d6c1d21c8057@disroo… Changes in v2: - Add a new commit to prevent an occasional panic under circumstances. - Rewrite and redo [v1 2/6] to be a more sensible commit. - Link to v1: https://lore.kernel.org/r/20240919-exynosdrm-decon-v1-0-6c5861c1cb04@disroo… --- Kaustabh Chakraborty (3): dt-bindings: display: samsung,exynos7-decon: add properties for iommus and ports drm/exynos: exynos7_drm_decon: fix call of decon_commit() drm/exynos: exynos7_drm_decon: add vblank check in IRQ handling .../bindings/display/samsung/samsung,exynos7-decon.yaml | 8 ++++++++ drivers/gpu/drm/exynos/exynos7_drm_decon.c | 8 ++++++-- 2 files changed, 14 insertions(+), 2 deletions(-) --- base-commit: 1b152eeca84a02bdb648f16b82ef3394007a9dcf change-id: 20240917-exynosdrm-decon-4c228dd1d2bf Best regards, -- Kaustabh Chakraborty <kauschluss(a)disroot.org>

1 month, 2 weeks

2
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2025