June 2025 - Linux-stable-mirror

RE: Patch "Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests" has been added to the 6.15-stable tree

by Michael Kelley

From: Sasha Levin <sashal(a)kernel.org> > > This is a note to let you know that I've just added the patch titled > > Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests > > to the 6.15-stable tree which can be found at: > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git > > The filename of the patch is: > drivers-hv-always-select-config_sysfb-for-hyper-v-gu.patch > and it can be found in the queue-6.15 subdirectory. > > If you, or anyone else, feels it should not be added to the stable tree, > please let <stable(a)vger.kernel.org> know about it. Please DO NOT backport this patch to ANY stable trees, at least not at the moment. It is causing a config problem that we're trying to work out. Once the resolution is decided upon, we can figure out what to backport. Thanks, Michael Kelley > > > > commit 9766859ee9884c35dde0411df167a06452fee3ce > Author: Michael Kelley <mhklinux(a)outlook.com> > Date: Mon May 19 21:01:43 2025 -0700 > > Drivers: hv: Always select CONFIG_SYSFB for Hyper-V guests > > [ Upstream commit 96959283a58d91ae20d025546f00e16f0a555208 ] > > The Hyper-V host provides guest VMs with a range of MMIO addresses > that guest VMBus drivers can use. The VMBus driver in Linux manages > that MMIO space, and allocates portions to drivers upon request. As > part of managing that MMIO space in a Generation 2 VM, the VMBus > driver must reserve the portion of the MMIO space that Hyper-V has > designated for the synthetic frame buffer, and not allocate this > space to VMBus drivers other than graphics framebuffer drivers. The > synthetic frame buffer MMIO area is described by the screen_info data > structure that is passed to the Linux kernel at boot time, so the > VMBus driver must access screen_info for Generation 2 VMs. (In > Generation 1 VMs, the framebuffer MMIO space is communicated to > the guest via a PCI pseudo-device, and access to screen_info is > not needed.) > > In commit a07b50d80ab6 ("hyperv: avoid dependency on screen_info") > the VMBus driver's access to screen_info is restricted to when > CONFIG_SYSFB is enabled. CONFIG_SYSFB is typically enabled in kernels > built for Hyper-V by virtue of having at least one of CONFIG_FB_EFI, > CONFIG_FB_VESA, or CONFIG_SYSFB_SIMPLEFB enabled, so the restriction > doesn't usually affect anything. But it's valid to have none of these > enabled, in which case CONFIG_SYSFB is not enabled, and the VMBus driver > is unable to properly reserve the framebuffer MMIO space for graphics > framebuffer drivers. The framebuffer MMIO space may be assigned to > some other VMBus driver, with undefined results. As an example, if > a VM is using a PCI pass-thru NVMe controller to host the OS disk, > the PCI NVMe controller is probed before any graphics devices, and the > NVMe controller is assigned a portion of the framebuffer MMIO space. > Hyper-V reports an error to Linux during the probe, and the OS disk > fails to get setup. Then Linux fails to boot in the VM. > > Fix this by having CONFIG_HYPERV always select SYSFB. Then the > VMBus driver in a Gen 2 VM can always reserve the MMIO space for the > graphics framebuffer driver, and prevent the undefined behavior. But > don't select SYSFB when building for HYPERV_VTL_MODE as VTLs other > than VTL 0 don't have a framebuffer and aren't subject to the issue. > Adding SYSFB in such cases is harmless, but would increase the image > size for no purpose. > > Fixes: a07b50d80ab6 ("hyperv: avoid dependency on screen_info") > Signed-off-by: Michael Kelley <mhklinux(a)outlook.com> > Reviewed-by: Saurabh Sengar <ssengar(a)linux.microsoft.com> > Link: > https://lore.kernel.org/st > able%2F20250520040143.6964-1- > mhklinux%2540outlook.com&data=05%7C02%7C%7C516ef64661c145eb315d08dda81861 > 51%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638851544842065319%7CUn > known%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXa > W4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=FZnrM9REMICWp > JqW88gD7CxeTwcztS2y8%2B8GqHNtF3E%3D&reserved=0 > Link: > https://lore.kernel.org/r%25 > 2F20250520040143.6964-1- > mhklinux%40outlook.com&data=05%7C02%7C%7C516ef64661c145eb315d08dda8186151 > %7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638851544842081386%7CUnkn > own%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4 > zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=j%2F5AvOlxwTKfVUL > vmNr%2FZliwRVrd9rSlVECyFGqFErE%3D&reserved=0 > Signed-off-by: Wei Liu <wei.liu(a)kernel.org> > Message-ID: <20250520040143.6964-1-mhklinux(a)outlook.com> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > > diff --git a/drivers/hv/Kconfig b/drivers/hv/Kconfig > index 6c1416167bd2e..724fc08a73e70 100644 > --- a/drivers/hv/Kconfig > +++ b/drivers/hv/Kconfig > @@ -9,6 +9,7 @@ config HYPERV > select PARAVIRT > select X86_HV_CALLBACK_VECTOR if X86 > select OF_EARLY_FLATTREE if OF > + select SYSFB if !HYPERV_VTL_MODE > help > Select this option to run Linux as a Hyper-V client operating > system.

2 months, 1 week

2
1
0 0

6.6-stable inclusion request

by Jens Axboe

Hi, Can you add these three patches to 6.6-stable? It fixes a behavioral change with 6.6-stable that Rom reported, affecting OpenBMC. Other stable versions not affected, as they got the required fixes on top backported already. Thanks, -- Jens Axboe

2 months, 1 week

2
1
0 0

[PATCH AUTOSEL 5.4 1/5] ALSA: hda: Ignore unsol events for cards being shut down

by Sasha Levin

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ] For the classic snd_hda_intel driver, codec->card and bus->card point to the exact same thing. When snd_card_diconnect() fires, bus->shutdown is set thanks to azx_dev_disconnect(). card->shutdown is already set when that happens but both provide basically the same functionality. For the DSP snd_soc_avs driver where multiple codecs are located on multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec card may be unregistered while other codecs are still operational. Proper check in form of card->shutdown must be used to verify whether the codec's card is being shut down. Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Technical Analysis ### Core Problem Being Fixed The commit addresses a **shutdown race condition** in multi-codec HDA systems, specifically in DSP/AVS drivers where multiple HDA codecs exist on the same sound card but with separate bus instances. The change modifies line 47 in `sound/pci/hda/hda_bind.c`: **Before:** ```c if (codec->bus->shutdown) return; ``` **After:** ```c if (codec->card->shutdown || codec->bus->shutdown) return; ``` ### Why This is a Good Backport Candidate **1. Bug Fix Nature - Small and Contained** - This is a clear **bug fix** addressing a specific shutdown race condition - The change is **minimal** (adding one condition check) and **well- contained** - No architectural changes or new features introduced - Low risk of introducing regressions **2. Critical Subsystem Impact** - Affects **HD-audio subsystem** which is critical for audio functionality - Could prevent system crashes or hangs during shutdown in multi-codec scenarios - Improves system stability during shutdown sequences **3. Technical Correctness** The fix addresses a **fundamental timing issue**: - In multi-codec systems, `card->shutdown` is set at the ALSA core level during `snd_card_disconnect()` - `bus->shutdown` is set later at the HDA controller level during individual codec shutdown - **Gap exists** where unsol events could be processed after card shutdown but before bus shutdown - This can cause codec operations on an already-disconnected sound card **4. Follows Stable Tree Criteria** - **Important bug fix**: Prevents potential system instability during shutdown - **Minimal risk**: Only adds an additional safety check, doesn't change existing logic - **Well-understood**: The change is straightforward and follows existing patterns seen in similar commits - **Confined to subsystem**: Only affects HDA audio subsystem **5. Consistency with Similar Backported Commits** This follows the exact same pattern as the historical commits that were successfully backported: - **Similar Commit #1**: Added `bus->shutdown` check to prevent unsol events during shutdown - **Backported (YES)** - **Similar Commit #2**: Added suspend/resume state check to unsol handler - **Backported (YES)** - **Similar Commit #3**: Added jack disconnection during codec unbind - **Backported (YES)** - **Similar Commit #4**: Added bus_probing flag to serialize codec registration - **Backported (YES)** All these commits follow the same pattern: **small, targeted fixes to prevent race conditions in HDA shutdown/initialization sequences**. **6. Real-World Impact** - Affects **DSP/AVS audio systems** which are increasingly common in modern hardware - Without this fix, systems with multiple audio codecs could experience: - Kernel oops during shutdown - System hangs - Audio subsystem corruption - Unpredictable behavior during reboot sequences ### Risk Assessment **Very Low Risk:** - The change only **adds** a safety check, doesn't remove existing functionality - `card->shutdown` check is used extensively throughout the ALSA subsystem already - Maintains **backward compatibility** completely - If `card->shutdown` is false, behavior is identical to before - No changes to data structures, APIs, or functional logic ### Conclusion This commit represents a **textbook stable backport candidate**: it's a small, well-understood bug fix that addresses a real stability issue in a critical subsystem with minimal risk of regression. The pattern matches multiple previously successful backports in the same subsystem, and the technical merit is clear. sound/pci/hda/hda_bind.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index 17a25e453f60c..047fe6cca7f1a 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -44,7 +44,7 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev) struct hda_codec *codec = container_of(dev, struct hda_codec, core); /* ignore unsol events during shutdown */ - if (codec->bus->shutdown) + if (codec->card->shutdown || codec->bus->shutdown) return; /* ignore unsol events during system suspend/resume */ -- 2.39.5

2 months, 1 week

1
4
0 0

[PATCH AUTOSEL 5.10 1/6] ALSA: hda: Ignore unsol events for cards being shut down

by Sasha Levin

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ] For the classic snd_hda_intel driver, codec->card and bus->card point to the exact same thing. When snd_card_diconnect() fires, bus->shutdown is set thanks to azx_dev_disconnect(). card->shutdown is already set when that happens but both provide basically the same functionality. For the DSP snd_soc_avs driver where multiple codecs are located on multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec card may be unregistered while other codecs are still operational. Proper check in form of card->shutdown must be used to verify whether the codec's card is being shut down. Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Technical Analysis ### Core Problem Being Fixed The commit addresses a **shutdown race condition** in multi-codec HDA systems, specifically in DSP/AVS drivers where multiple HDA codecs exist on the same sound card but with separate bus instances. The change modifies line 47 in `sound/pci/hda/hda_bind.c`: **Before:** ```c if (codec->bus->shutdown) return; ``` **After:** ```c if (codec->card->shutdown || codec->bus->shutdown) return; ``` ### Why This is a Good Backport Candidate **1. Bug Fix Nature - Small and Contained** - This is a clear **bug fix** addressing a specific shutdown race condition - The change is **minimal** (adding one condition check) and **well- contained** - No architectural changes or new features introduced - Low risk of introducing regressions **2. Critical Subsystem Impact** - Affects **HD-audio subsystem** which is critical for audio functionality - Could prevent system crashes or hangs during shutdown in multi-codec scenarios - Improves system stability during shutdown sequences **3. Technical Correctness** The fix addresses a **fundamental timing issue**: - In multi-codec systems, `card->shutdown` is set at the ALSA core level during `snd_card_disconnect()` - `bus->shutdown` is set later at the HDA controller level during individual codec shutdown - **Gap exists** where unsol events could be processed after card shutdown but before bus shutdown - This can cause codec operations on an already-disconnected sound card **4. Follows Stable Tree Criteria** - **Important bug fix**: Prevents potential system instability during shutdown - **Minimal risk**: Only adds an additional safety check, doesn't change existing logic - **Well-understood**: The change is straightforward and follows existing patterns seen in similar commits - **Confined to subsystem**: Only affects HDA audio subsystem **5. Consistency with Similar Backported Commits** This follows the exact same pattern as the historical commits that were successfully backported: - **Similar Commit #1**: Added `bus->shutdown` check to prevent unsol events during shutdown - **Backported (YES)** - **Similar Commit #2**: Added suspend/resume state check to unsol handler - **Backported (YES)** - **Similar Commit #3**: Added jack disconnection during codec unbind - **Backported (YES)** - **Similar Commit #4**: Added bus_probing flag to serialize codec registration - **Backported (YES)** All these commits follow the same pattern: **small, targeted fixes to prevent race conditions in HDA shutdown/initialization sequences**. **6. Real-World Impact** - Affects **DSP/AVS audio systems** which are increasingly common in modern hardware - Without this fix, systems with multiple audio codecs could experience: - Kernel oops during shutdown - System hangs - Audio subsystem corruption - Unpredictable behavior during reboot sequences ### Risk Assessment **Very Low Risk:** - The change only **adds** a safety check, doesn't remove existing functionality - `card->shutdown` check is used extensively throughout the ALSA subsystem already - Maintains **backward compatibility** completely - If `card->shutdown` is false, behavior is identical to before - No changes to data structures, APIs, or functional logic ### Conclusion This commit represents a **textbook stable backport candidate**: it's a small, well-understood bug fix that addresses a real stability issue in a critical subsystem with minimal risk of regression. The pattern matches multiple previously successful backports in the same subsystem, and the technical merit is clear. sound/pci/hda/hda_bind.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index 0a83afa5f373c..6625643f333e8 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -44,7 +44,7 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev) struct hda_codec *codec = container_of(dev, struct hda_codec, core); /* ignore unsol events during shutdown */ - if (codec->bus->shutdown) + if (codec->card->shutdown || codec->bus->shutdown) return; /* ignore unsol events during system suspend/resume */ -- 2.39.5

2 months, 1 week

1
5
0 0

[PATCH AUTOSEL 5.15 1/8] ALSA: hda: Ignore unsol events for cards being shut down

by Sasha Levin

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ] For the classic snd_hda_intel driver, codec->card and bus->card point to the exact same thing. When snd_card_diconnect() fires, bus->shutdown is set thanks to azx_dev_disconnect(). card->shutdown is already set when that happens but both provide basically the same functionality. For the DSP snd_soc_avs driver where multiple codecs are located on multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec card may be unregistered while other codecs are still operational. Proper check in form of card->shutdown must be used to verify whether the codec's card is being shut down. Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Technical Analysis ### Core Problem Being Fixed The commit addresses a **shutdown race condition** in multi-codec HDA systems, specifically in DSP/AVS drivers where multiple HDA codecs exist on the same sound card but with separate bus instances. The change modifies line 47 in `sound/pci/hda/hda_bind.c`: **Before:** ```c if (codec->bus->shutdown) return; ``` **After:** ```c if (codec->card->shutdown || codec->bus->shutdown) return; ``` ### Why This is a Good Backport Candidate **1. Bug Fix Nature - Small and Contained** - This is a clear **bug fix** addressing a specific shutdown race condition - The change is **minimal** (adding one condition check) and **well- contained** - No architectural changes or new features introduced - Low risk of introducing regressions **2. Critical Subsystem Impact** - Affects **HD-audio subsystem** which is critical for audio functionality - Could prevent system crashes or hangs during shutdown in multi-codec scenarios - Improves system stability during shutdown sequences **3. Technical Correctness** The fix addresses a **fundamental timing issue**: - In multi-codec systems, `card->shutdown` is set at the ALSA core level during `snd_card_disconnect()` - `bus->shutdown` is set later at the HDA controller level during individual codec shutdown - **Gap exists** where unsol events could be processed after card shutdown but before bus shutdown - This can cause codec operations on an already-disconnected sound card **4. Follows Stable Tree Criteria** - **Important bug fix**: Prevents potential system instability during shutdown - **Minimal risk**: Only adds an additional safety check, doesn't change existing logic - **Well-understood**: The change is straightforward and follows existing patterns seen in similar commits - **Confined to subsystem**: Only affects HDA audio subsystem **5. Consistency with Similar Backported Commits** This follows the exact same pattern as the historical commits that were successfully backported: - **Similar Commit #1**: Added `bus->shutdown` check to prevent unsol events during shutdown - **Backported (YES)** - **Similar Commit #2**: Added suspend/resume state check to unsol handler - **Backported (YES)** - **Similar Commit #3**: Added jack disconnection during codec unbind - **Backported (YES)** - **Similar Commit #4**: Added bus_probing flag to serialize codec registration - **Backported (YES)** All these commits follow the same pattern: **small, targeted fixes to prevent race conditions in HDA shutdown/initialization sequences**. **6. Real-World Impact** - Affects **DSP/AVS audio systems** which are increasingly common in modern hardware - Without this fix, systems with multiple audio codecs could experience: - Kernel oops during shutdown - System hangs - Audio subsystem corruption - Unpredictable behavior during reboot sequences ### Risk Assessment **Very Low Risk:** - The change only **adds** a safety check, doesn't remove existing functionality - `card->shutdown` check is used extensively throughout the ALSA subsystem already - Maintains **backward compatibility** completely - If `card->shutdown` is false, behavior is identical to before - No changes to data structures, APIs, or functional logic ### Conclusion This commit represents a **textbook stable backport candidate**: it's a small, well-understood bug fix that addresses a real stability issue in a critical subsystem with minimal risk of regression. The pattern matches multiple previously successful backports in the same subsystem, and the technical merit is clear. sound/pci/hda/hda_bind.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index 8e35009ec25cb..a22f723ab3ab6 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -45,7 +45,7 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev) struct hda_codec *codec = container_of(dev, struct hda_codec, core); /* ignore unsol events during shutdown */ - if (codec->bus->shutdown) + if (codec->card->shutdown || codec->bus->shutdown) return; /* ignore unsol events during system suspend/resume */ -- 2.39.5

2 months, 1 week

1
7
0 0

[PATCH AUTOSEL 6.1 1/8] ALSA: hda: Ignore unsol events for cards being shut down

by Sasha Levin

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ] For the classic snd_hda_intel driver, codec->card and bus->card point to the exact same thing. When snd_card_diconnect() fires, bus->shutdown is set thanks to azx_dev_disconnect(). card->shutdown is already set when that happens but both provide basically the same functionality. For the DSP snd_soc_avs driver where multiple codecs are located on multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec card may be unregistered while other codecs are still operational. Proper check in form of card->shutdown must be used to verify whether the codec's card is being shut down. Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Technical Analysis ### Core Problem Being Fixed The commit addresses a **shutdown race condition** in multi-codec HDA systems, specifically in DSP/AVS drivers where multiple HDA codecs exist on the same sound card but with separate bus instances. The change modifies line 47 in `sound/pci/hda/hda_bind.c`: **Before:** ```c if (codec->bus->shutdown) return; ``` **After:** ```c if (codec->card->shutdown || codec->bus->shutdown) return; ``` ### Why This is a Good Backport Candidate **1. Bug Fix Nature - Small and Contained** - This is a clear **bug fix** addressing a specific shutdown race condition - The change is **minimal** (adding one condition check) and **well- contained** - No architectural changes or new features introduced - Low risk of introducing regressions **2. Critical Subsystem Impact** - Affects **HD-audio subsystem** which is critical for audio functionality - Could prevent system crashes or hangs during shutdown in multi-codec scenarios - Improves system stability during shutdown sequences **3. Technical Correctness** The fix addresses a **fundamental timing issue**: - In multi-codec systems, `card->shutdown` is set at the ALSA core level during `snd_card_disconnect()` - `bus->shutdown` is set later at the HDA controller level during individual codec shutdown - **Gap exists** where unsol events could be processed after card shutdown but before bus shutdown - This can cause codec operations on an already-disconnected sound card **4. Follows Stable Tree Criteria** - **Important bug fix**: Prevents potential system instability during shutdown - **Minimal risk**: Only adds an additional safety check, doesn't change existing logic - **Well-understood**: The change is straightforward and follows existing patterns seen in similar commits - **Confined to subsystem**: Only affects HDA audio subsystem **5. Consistency with Similar Backported Commits** This follows the exact same pattern as the historical commits that were successfully backported: - **Similar Commit #1**: Added `bus->shutdown` check to prevent unsol events during shutdown - **Backported (YES)** - **Similar Commit #2**: Added suspend/resume state check to unsol handler - **Backported (YES)** - **Similar Commit #3**: Added jack disconnection during codec unbind - **Backported (YES)** - **Similar Commit #4**: Added bus_probing flag to serialize codec registration - **Backported (YES)** All these commits follow the same pattern: **small, targeted fixes to prevent race conditions in HDA shutdown/initialization sequences**. **6. Real-World Impact** - Affects **DSP/AVS audio systems** which are increasingly common in modern hardware - Without this fix, systems with multiple audio codecs could experience: - Kernel oops during shutdown - System hangs - Audio subsystem corruption - Unpredictable behavior during reboot sequences ### Risk Assessment **Very Low Risk:** - The change only **adds** a safety check, doesn't remove existing functionality - `card->shutdown` check is used extensively throughout the ALSA subsystem already - Maintains **backward compatibility** completely - If `card->shutdown` is false, behavior is identical to before - No changes to data structures, APIs, or functional logic ### Conclusion This commit represents a **textbook stable backport candidate**: it's a small, well-understood bug fix that addresses a real stability issue in a critical subsystem with minimal risk of regression. The pattern matches multiple previously successful backports in the same subsystem, and the technical merit is clear. sound/pci/hda/hda_bind.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index 890c2f7c33fc2..4c7355a0814d1 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -45,7 +45,7 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev) struct hda_codec *codec = container_of(dev, struct hda_codec, core); /* ignore unsol events during shutdown */ - if (codec->bus->shutdown) + if (codec->card->shutdown || codec->bus->shutdown) return; /* ignore unsol events during system suspend/resume */ -- 2.39.5

2 months, 1 week

1
7
0 0

[PATCH AUTOSEL 6.6 1/9] ALSA: hda: Ignore unsol events for cards being shut down

by Sasha Levin

From: Cezary Rojewski <cezary.rojewski(a)intel.com> [ Upstream commit 3f100f524e75586537e337b34d18c8d604b398e7 ] For the classic snd_hda_intel driver, codec->card and bus->card point to the exact same thing. When snd_card_diconnect() fires, bus->shutdown is set thanks to azx_dev_disconnect(). card->shutdown is already set when that happens but both provide basically the same functionality. For the DSP snd_soc_avs driver where multiple codecs are located on multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec card may be unregistered while other codecs are still operational. Proper check in form of card->shutdown must be used to verify whether the codec's card is being shut down. Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski(a)linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Technical Analysis ### Core Problem Being Fixed The commit addresses a **shutdown race condition** in multi-codec HDA systems, specifically in DSP/AVS drivers where multiple HDA codecs exist on the same sound card but with separate bus instances. The change modifies line 47 in `sound/pci/hda/hda_bind.c`: **Before:** ```c if (codec->bus->shutdown) return; ``` **After:** ```c if (codec->card->shutdown || codec->bus->shutdown) return; ``` ### Why This is a Good Backport Candidate **1. Bug Fix Nature - Small and Contained** - This is a clear **bug fix** addressing a specific shutdown race condition - The change is **minimal** (adding one condition check) and **well- contained** - No architectural changes or new features introduced - Low risk of introducing regressions **2. Critical Subsystem Impact** - Affects **HD-audio subsystem** which is critical for audio functionality - Could prevent system crashes or hangs during shutdown in multi-codec scenarios - Improves system stability during shutdown sequences **3. Technical Correctness** The fix addresses a **fundamental timing issue**: - In multi-codec systems, `card->shutdown` is set at the ALSA core level during `snd_card_disconnect()` - `bus->shutdown` is set later at the HDA controller level during individual codec shutdown - **Gap exists** where unsol events could be processed after card shutdown but before bus shutdown - This can cause codec operations on an already-disconnected sound card **4. Follows Stable Tree Criteria** - **Important bug fix**: Prevents potential system instability during shutdown - **Minimal risk**: Only adds an additional safety check, doesn't change existing logic - **Well-understood**: The change is straightforward and follows existing patterns seen in similar commits - **Confined to subsystem**: Only affects HDA audio subsystem **5. Consistency with Similar Backported Commits** This follows the exact same pattern as the historical commits that were successfully backported: - **Similar Commit #1**: Added `bus->shutdown` check to prevent unsol events during shutdown - **Backported (YES)** - **Similar Commit #2**: Added suspend/resume state check to unsol handler - **Backported (YES)** - **Similar Commit #3**: Added jack disconnection during codec unbind - **Backported (YES)** - **Similar Commit #4**: Added bus_probing flag to serialize codec registration - **Backported (YES)** All these commits follow the same pattern: **small, targeted fixes to prevent race conditions in HDA shutdown/initialization sequences**. **6. Real-World Impact** - Affects **DSP/AVS audio systems** which are increasingly common in modern hardware - Without this fix, systems with multiple audio codecs could experience: - Kernel oops during shutdown - System hangs - Audio subsystem corruption - Unpredictable behavior during reboot sequences ### Risk Assessment **Very Low Risk:** - The change only **adds** a safety check, doesn't remove existing functionality - `card->shutdown` check is used extensively throughout the ALSA subsystem already - Maintains **backward compatibility** completely - If `card->shutdown` is false, behavior is identical to before - No changes to data structures, APIs, or functional logic ### Conclusion This commit represents a **textbook stable backport candidate**: it's a small, well-understood bug fix that addresses a real stability issue in a critical subsystem with minimal risk of regression. The pattern matches multiple previously successful backports in the same subsystem, and the technical merit is clear. sound/pci/hda/hda_bind.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_bind.c b/sound/pci/hda/hda_bind.c index b7ca2a83fbb08..95786bdadfe6a 100644 --- a/sound/pci/hda/hda_bind.c +++ b/sound/pci/hda/hda_bind.c @@ -44,7 +44,7 @@ static void hda_codec_unsol_event(struct hdac_device *dev, unsigned int ev) struct hda_codec *codec = container_of(dev, struct hda_codec, core); /* ignore unsol events during shutdown */ - if (codec->bus->shutdown) + if (codec->card->shutdown || codec->bus->shutdown) return; /* ignore unsol events during system suspend/resume */ -- 2.39.5

2 months, 1 week

1
8
0 0

[PATCH AUTOSEL 6.12 01/12] riscv: add a data fence for CMODX in the kernel mode

by Sasha Levin

From: Andy Chiu <andybnac(a)gmail.com> [ Upstream commit ca358692de41b273468e625f96926fa53e13bd8c ] RISC-V spec explicitly calls out that a local fence.i is not enough for the code modification to be visble from a remote hart. In fact, it states: To make a store to instruction memory visible to all RISC-V harts, the writing hart also has to execute a data FENCE before requesting that all remote RISC-V harts execute a FENCE.I. Although current riscv drivers for IPI use ordered MMIO when sending IPIs in order to synchronize the action between previous csd writes, riscv does not restrict itself to any particular flavor of IPI. Any driver or firmware implementation that does not order data writes before the IPI may pose a risk for code-modifying race. Thus, add a fence here to order data writes before making the IPI. Signed-off-by: Andy Chiu <andybnac(a)gmail.com> Reviewed-by: Björn Töpel <bjorn(a)rivosinc.com> Link: https://lore.kernel.org/r/20250407180838.42877-8-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti(a)rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer(a)dabbelt.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- Based on my analysis of the commit and the RISC-V kernel codebase, here is my assessment: **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Code Analysis The commit adds a critical memory fence (`RISCV_FENCE(w, o)`) before sending IPIs in the `flush_icache_all()` function in `arch/riscv/mm/cacheflush.c`. Specifically, it: 1. **Adds a data fence before IPI**: The `RISCV_FENCE(w, o)` instruction ensures that all previous memory writes (w) are ordered before device output operations (o), which includes MMIO writes for sending IPIs. 2. **Addresses RISC-V specification requirement**: The commit message explicitly references the RISC-V Platform Specification Section 2.1, which requires a data FENCE before requesting remote FENCE.I operations to ensure code modifications are visible across harts (hardware threads). 3. **Fixes a potential race condition**: Without this fence, there's a risk that code modifications made by one hart might not be visible to other harts when they receive the IPI to flush their instruction caches. ## Why This Should Be Backported ### 1. **Critical Correctness Issue** This fixes a fundamental correctness issue in code modification (CMODX) operations on RISC-V multiprocessor systems. The lack of proper ordering can lead to: - Stale instruction execution on remote cores - Race conditions in dynamic code modification scenarios - Potential security vulnerabilities in JIT compilers, kernel modules, and other code-patching mechanisms ### 2. **Specification Compliance** The fix ensures compliance with the RISC-V specification requirements. The spec explicitly states that a data fence is required before remote fence.i operations, making this a standards compliance fix rather than an optimization. ### 3. **Small and Contained Change** The change is minimal and surgical: - Adds only one fence instruction (`RISCV_FENCE(w, o)`) - No functional logic changes - Affects only the `flush_icache_all()` path - Low risk of introducing regressions ### 4. **Wide Impact on Code Modification** The `flush_icache_all()` function is used by: - Kernel module loading/unloading - JIT compilers (eBPF, etc.) - Dynamic code patching - Debugging infrastructure (kprobes, uprobes) - Any code that modifies executable instructions ### 5. **Similarity to Accepted Backports** Looking at similar commit #1 in the reference examples (irqchip fence ordering), which was marked as backportable, this commit addresses the same class of memory ordering issues that are critical for correctness on RISC-V systems. ### 6. **Platform Independence** The fix applies to all RISC-V implementations, as it addresses a fundamental architectural requirement rather than a specific hardware bug. ## Risk Assessment **Low Risk**: The fence instruction is a standard RISC-V barrier that: - Does not change control flow - Only adds necessary ordering constraints - Is already used extensively throughout the RISC-V kernel code - Has predictable performance impact (minimal additional latency) ## Comparison with Reference Commits This commit is most similar to reference commit #1 (irqchip memory ordering fix), which was correctly marked for backporting. Both commits: - Fix memory ordering issues in IPI/interrupt subsystems - Address RISC-V specification requirements - Have minimal code changes with high correctness impact - Fix potential race conditions in multi-hart systems The commit fixes a critical specification compliance issue that could lead to correctness problems in code modification scenarios across all RISC-V multiprocessor systems, making it an excellent candidate for stable backporting. arch/riscv/mm/cacheflush.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c index b816727298872..b2e4b81763f88 100644 --- a/arch/riscv/mm/cacheflush.c +++ b/arch/riscv/mm/cacheflush.c @@ -24,7 +24,20 @@ void flush_icache_all(void) if (num_online_cpus() < 2) return; - else if (riscv_use_sbi_for_rfence()) + + /* + * Make sure all previous writes to the D$ are ordered before making + * the IPI. The RISC-V spec states that a hart must execute a data fence + * before triggering a remote fence.i in order to make the modification + * visable for remote harts. + * + * IPIs on RISC-V are triggered by MMIO writes to either CLINT or + * S-IMSIC, so the fence ensures previous data writes "happen before" + * the MMIO. + */ + RISCV_FENCE(w, o); + + if (riscv_use_sbi_for_rfence()) sbi_remote_fence_i(NULL); else on_each_cpu(ipi_remote_fence_i, NULL, 1); -- 2.39.5

2 months, 1 week

1
11
0 0

[PATCH AUTOSEL 6.15 01/15] riscv: add a data fence for CMODX in the kernel mode

by Sasha Levin

From: Andy Chiu <andybnac(a)gmail.com> [ Upstream commit ca358692de41b273468e625f96926fa53e13bd8c ] RISC-V spec explicitly calls out that a local fence.i is not enough for the code modification to be visble from a remote hart. In fact, it states: To make a store to instruction memory visible to all RISC-V harts, the writing hart also has to execute a data FENCE before requesting that all remote RISC-V harts execute a FENCE.I. Although current riscv drivers for IPI use ordered MMIO when sending IPIs in order to synchronize the action between previous csd writes, riscv does not restrict itself to any particular flavor of IPI. Any driver or firmware implementation that does not order data writes before the IPI may pose a risk for code-modifying race. Thus, add a fence here to order data writes before making the IPI. Signed-off-by: Andy Chiu <andybnac(a)gmail.com> Reviewed-by: Björn Töpel <bjorn(a)rivosinc.com> Link: https://lore.kernel.org/r/20250407180838.42877-8-andybnac@gmail.com Signed-off-by: Alexandre Ghiti <alexghiti(a)rivosinc.com> Signed-off-by: Palmer Dabbelt <palmer(a)dabbelt.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- Based on my analysis of the commit and the RISC-V kernel codebase, here is my assessment: **YES** This commit should be backported to stable kernel trees. Here's my extensive analysis: ## Code Analysis The commit adds a critical memory fence (`RISCV_FENCE(w, o)`) before sending IPIs in the `flush_icache_all()` function in `arch/riscv/mm/cacheflush.c`. Specifically, it: 1. **Adds a data fence before IPI**: The `RISCV_FENCE(w, o)` instruction ensures that all previous memory writes (w) are ordered before device output operations (o), which includes MMIO writes for sending IPIs. 2. **Addresses RISC-V specification requirement**: The commit message explicitly references the RISC-V Platform Specification Section 2.1, which requires a data FENCE before requesting remote FENCE.I operations to ensure code modifications are visible across harts (hardware threads). 3. **Fixes a potential race condition**: Without this fence, there's a risk that code modifications made by one hart might not be visible to other harts when they receive the IPI to flush their instruction caches. ## Why This Should Be Backported ### 1. **Critical Correctness Issue** This fixes a fundamental correctness issue in code modification (CMODX) operations on RISC-V multiprocessor systems. The lack of proper ordering can lead to: - Stale instruction execution on remote cores - Race conditions in dynamic code modification scenarios - Potential security vulnerabilities in JIT compilers, kernel modules, and other code-patching mechanisms ### 2. **Specification Compliance** The fix ensures compliance with the RISC-V specification requirements. The spec explicitly states that a data fence is required before remote fence.i operations, making this a standards compliance fix rather than an optimization. ### 3. **Small and Contained Change** The change is minimal and surgical: - Adds only one fence instruction (`RISCV_FENCE(w, o)`) - No functional logic changes - Affects only the `flush_icache_all()` path - Low risk of introducing regressions ### 4. **Wide Impact on Code Modification** The `flush_icache_all()` function is used by: - Kernel module loading/unloading - JIT compilers (eBPF, etc.) - Dynamic code patching - Debugging infrastructure (kprobes, uprobes) - Any code that modifies executable instructions ### 5. **Similarity to Accepted Backports** Looking at similar commit #1 in the reference examples (irqchip fence ordering), which was marked as backportable, this commit addresses the same class of memory ordering issues that are critical for correctness on RISC-V systems. ### 6. **Platform Independence** The fix applies to all RISC-V implementations, as it addresses a fundamental architectural requirement rather than a specific hardware bug. ## Risk Assessment **Low Risk**: The fence instruction is a standard RISC-V barrier that: - Does not change control flow - Only adds necessary ordering constraints - Is already used extensively throughout the RISC-V kernel code - Has predictable performance impact (minimal additional latency) ## Comparison with Reference Commits This commit is most similar to reference commit #1 (irqchip memory ordering fix), which was correctly marked for backporting. Both commits: - Fix memory ordering issues in IPI/interrupt subsystems - Address RISC-V specification requirements - Have minimal code changes with high correctness impact - Fix potential race conditions in multi-hart systems The commit fixes a critical specification compliance issue that could lead to correctness problems in code modification scenarios across all RISC-V multiprocessor systems, making it an excellent candidate for stable backporting. arch/riscv/mm/cacheflush.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c index b816727298872..b2e4b81763f88 100644 --- a/arch/riscv/mm/cacheflush.c +++ b/arch/riscv/mm/cacheflush.c @@ -24,7 +24,20 @@ void flush_icache_all(void) if (num_online_cpus() < 2) return; - else if (riscv_use_sbi_for_rfence()) + + /* + * Make sure all previous writes to the D$ are ordered before making + * the IPI. The RISC-V spec states that a hart must execute a data fence + * before triggering a remote fence.i in order to make the modification + * visable for remote harts. + * + * IPIs on RISC-V are triggered by MMIO writes to either CLINT or + * S-IMSIC, so the fence ensures previous data writes "happen before" + * the MMIO. + */ + RISCV_FENCE(w, o); + + if (riscv_use_sbi_for_rfence()) sbi_remote_fence_i(NULL); else on_each_cpu(ipi_remote_fence_i, NULL, 1); -- 2.39.5

2 months, 1 week

1
14
0 0

FAILED: patch "[PATCH] Revert "drm/i915/gem: Allow EXEC_CAPTURE on recoverable" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x ed5915cfce2abb9a553c3737badebd4a11d6c9c7 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025061755-peso-ravage-c101@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From ed5915cfce2abb9a553c3737badebd4a11d6c9c7 Mon Sep 17 00:00:00 2001 From: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Date: Thu, 22 May 2025 09:41:27 +0300 Subject: [PATCH] Revert "drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit d6e020819612a4a06207af858e0978be4d3e3140. The IS_DGFX check was put in place because error capture of buffer objects is expected to be broken on devices with VRAM. Userspace fix[1] to the impacted media driver has been submitted, merged and a new driver release is out as 25.2.3 where the capture flag is dropped on DG1 thus unblocking the usage of media driver on DG1. [1] https://github.com/intel/media-driver/commit/93c07d9b4b96a78bab21f6acd4eb86… Cc: stable(a)vger.kernel.org # v6.0+ Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: Andi Shyti <andi.shyti(a)linux.intel.com> Cc: Matthew Auld <matthew.auld(a)intel.com> Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Cc: Tvrtko Ursulin <tursulin(a)ursulin.net> Acked-by: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> Reviewed-by: Andi Shyti <andi.shyti(a)linux.intel.com> Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.inte… [Joonas: Update message to point out the merged userspace fix] Signed-off-by: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> (cherry picked from commit d2dc30e0aa252830f908c8e793d3139d51321370) Signed-off-by: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c index ea9d5063ce78..ca7e9216934a 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c @@ -2013,7 +2013,7 @@ static int eb_capture_stage(struct i915_execbuffer *eb) continue; if (i915_gem_context_is_recoverable(eb->gem_context) && - GRAPHICS_VER_FULL(eb->i915) > IP_VER(12, 10)) + (IS_DGFX(eb->i915) || GRAPHICS_VER_FULL(eb->i915) > IP_VER(12, 0))) return -EINVAL; for_each_batch_create_order(eb, j) {

2 months, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2025