July 2025 - Linux-stable-mirror

[PATCH] riscv: cpu_ops_sbi: Use static array for boot_data

by Vivian Wang

Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU Cc: stable(a)vger.kernel.org Reported-by: Han Gao <rabenda.cn(a)gmail.com> Fixes: 9a2451f18663 ("RISC-V: Avoid using per cpu array for ordered booting") Signed-off-by: Vivian Wang <wangruikang(a)iscas.ac.cn> --- arch/riscv/kernel/cpu_ops_sbi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c index e6fbaaf549562d6e9ca63a66371441fe8b230cb3..87d6559448039cdd2e8a604a19bd832ab5a98fc2 100644 --- a/arch/riscv/kernel/cpu_ops_sbi.c +++ b/arch/riscv/kernel/cpu_ops_sbi.c @@ -18,10 +18,10 @@ const struct cpu_operations cpu_ops_sbi; /* * Ordered booting via HSM brings one cpu at a time. However, cpu hotplug can - * be invoked from multiple threads in parallel. Define a per cpu data + * be invoked from multiple threads in parallel. Define an array of boot data * to handle that. */ -static DEFINE_PER_CPU(struct sbi_hart_boot_data, boot_data); +static struct sbi_hart_boot_data boot_data[NR_CPUS]; static int sbi_hsm_hart_start(unsigned long hartid, unsigned long saddr, unsigned long priv) @@ -67,7 +67,7 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle) unsigned long boot_addr = __pa_symbol(secondary_start_sbi); unsigned long hartid = cpuid_to_hartid_map(cpuid); unsigned long hsm_data; - struct sbi_hart_boot_data *bdata = &per_cpu(boot_data, cpuid); + struct sbi_hart_boot_data *bdata = &boot_data[cpuid]; /* Make sure tidle is updated */ smp_mb(); --- base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494 change-id: 20250624-riscv-hsm-boot-data-array-1d392098bd22 Best regards, -- Vivian "dramforever" Wang

6 months

3
2
0 0

[PATCH] media: iris: Call correct power off callback in cleanup path

by Krzysztof Kozlowski

Driver implements different callbacks for the power off controller (.power_off_controller): - iris_vpu_power_off_controller, - iris_vpu33_power_off_controller, The generic wrapper for handling power off - iris_vpu_power_off() - calls them via 'iris_platform_data->vpu_ops', so shall the cleanup code in iris_vpu_power_on(). This makes also sense if looking at caller of iris_vpu_power_on(), which unwinds also with the wrapper calling respective platfortm code (unwinds with iris_vpu_power_off()). Otherwise power off sequence on the newer VPU3.3 in error path is not complete. Fixes: c69df5de4ac3 ("media: platform: qcom/iris: add power_off_controller to vpu_ops") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- drivers/media/platform/qcom/iris/iris_vpu_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/platform/qcom/iris/iris_vpu_common.c b/drivers/media/platform/qcom/iris/iris_vpu_common.c index 268e45acaa7c..42a7c53ce48e 100644 --- a/drivers/media/platform/qcom/iris/iris_vpu_common.c +++ b/drivers/media/platform/qcom/iris/iris_vpu_common.c @@ -359,7 +359,7 @@ int iris_vpu_power_on(struct iris_core *core) return 0; err_power_off_ctrl: - iris_vpu_power_off_controller(core); + core->iris_platform_data->vpu_ops->power_off_controller(core); err_unvote_icc: iris_unset_icc_bw(core); err: -- 2.43.0

6 months

3
2
0 0

[PATCH net] net: ipv4: fix incorrect MTU in broadcast routes

by Oscar Maes

Currently, __mkroute_output overrules the MTU value configured for broadcast routes. This buggy behaviour can be reproduced with: ip link set dev eth1 mtu 9000 ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500 The maximum packet size should be 1500, but it is actually 8000: ping -b 192.168.0.255 -s 8000 Fix __mkroute_output to allow MTU values to be configured for for broadcast routes (to support a mixed-MTU local-area-network). Signed-off-by: Oscar Maes <oscmaes92(a)gmail.com> --- net/ipv4/route.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index fccb05fb3..a2a3b6482 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -2585,7 +2585,6 @@ static struct rtable *__mkroute_output(const struct fib_result *res, do_cache = true; if (type == RTN_BROADCAST) { flags |= RTCF_BROADCAST | RTCF_LOCAL; - fi = NULL; } else if (type == RTN_MULTICAST) { flags |= RTCF_MULTICAST | RTCF_LOCAL; if (!ip_check_mc_rcu(in_dev, fl4->daddr, fl4->saddr, -- 2.39.5

6 months

3
2
0 0

[PATCH] dt-bindings: i2c: realtek,rtl9301: Fix missing 'reg' constraint

by Krzysztof Kozlowski

Lists should have fixed amount if items, so add missing constraint to the 'reg' property (only one address space entry). Fixes: c5eda0333076 ("dt-bindings: i2c: Add Realtek RTL I2C Controller") Cc: <stable(a)vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> --- Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml index eddfd329c67b..69ac5db8b914 100644 --- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml @@ -26,7 +26,8 @@ properties: - const: realtek,rtl9301-i2c reg: - description: Register offset and size this I2C controller. + items: + - description: Register offset and size this I2C controller. "#address-cells": const: 1 -- 2.43.0

6 months

2
1
0 0

FAILED: patch "[PATCH] io_uring/kbuf: account ring io_buffer_list memory" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 475a8d30371604a6363da8e304a608a5959afc40 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062043-header-audio-50d2@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 475a8d30371604a6363da8e304a608a5959afc40 Mon Sep 17 00:00:00 2001 From: Pavel Begunkov <asml.silence(a)gmail.com> Date: Tue, 13 May 2025 18:26:46 +0100 Subject: [PATCH] io_uring/kbuf: account ring io_buffer_list memory Follow the non-ringed pbuf struct io_buffer_list allocations and account it against the memcg. There is low chance of that being an actual problem as ring provided buffer should either pin user memory or allocate it, which is already accounted. Cc: stable(a)vger.kernel.org # 6.1 Signed-off-by: Pavel Begunkov <asml.silence(a)gmail.com> Link: https://lore.kernel.org/r/3985218b50d341273cafff7234e1a7e6d0db9808.17471504… Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/io_uring/kbuf.c b/io_uring/kbuf.c index 1cf0d2c01287..446207db1edf 100644 --- a/io_uring/kbuf.c +++ b/io_uring/kbuf.c @@ -621,7 +621,7 @@ int io_register_pbuf_ring(struct io_ring_ctx *ctx, void __user *arg) io_destroy_bl(ctx, bl); } - free_bl = bl = kzalloc(sizeof(*bl), GFP_KERNEL); + free_bl = bl = kzalloc(sizeof(*bl), GFP_KERNEL_ACCOUNT); if (!bl) return -ENOMEM;

6 months

3
2
0 0

FAILED: patch "[PATCH] nvme: always punt polled uring_cmd end_io work to task_work" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 9ce6c9875f3e995be5fd720b65835291f8a609b1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062012-veggie-grout-8f7e@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce6c9875f3e995be5fd720b65835291f8a609b1 Mon Sep 17 00:00:00 2001 From: Jens Axboe <axboe(a)kernel.dk> Date: Fri, 13 Jun 2025 13:37:41 -0600 Subject: [PATCH] nvme: always punt polled uring_cmd end_io work to task_work Currently NVMe uring_cmd completions will complete locally, if they are polled. This is done because those completions are always invoked from task context. And while that is true, there's no guarantee that it's invoked under the right ring context, or even task. If someone does NVMe passthrough via multiple threads and with a limited number of poll queues, then ringA may find completions from ringB. For that case, completing the request may not be sound. Always just punt the passthrough completions via task_work, which will redirect the completion, if needed. Cc: stable(a)vger.kernel.org Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands") Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c index 0b50da2f1175..6b3ac8ae3f34 100644 --- a/drivers/nvme/host/ioctl.c +++ b/drivers/nvme/host/ioctl.c @@ -429,21 +429,14 @@ static enum rq_end_io_ret nvme_uring_cmd_end_io(struct request *req, pdu->result = le64_to_cpu(nvme_req(req)->result.u64); /* - * For iopoll, complete it directly. Note that using the uring_cmd - * helper for this is safe only because we check blk_rq_is_poll(). - * As that returns false if we're NOT on a polled queue, then it's - * safe to use the polled completion helper. - * - * Otherwise, move the completion to task work. + * IOPOLL could potentially complete this request directly, but + * if multiple rings are polling on the same queue, then it's possible + * for one ring to find completions for another ring. Punting the + * completion via task_work will always direct it to the right + * location, rather than potentially complete requests for ringA + * under iopoll invocations from ringB. */ - if (blk_rq_is_poll(req)) { - if (pdu->bio) - blk_rq_unmap_user(pdu->bio); - io_uring_cmd_iopoll_done(ioucmd, pdu->result, pdu->status); - } else { - io_uring_cmd_do_in_task_lazy(ioucmd, nvme_uring_task_cb); - } - + io_uring_cmd_do_in_task_lazy(ioucmd, nvme_uring_task_cb); return RQ_END_IO_FREE; }

6 months

3
2
0 0

FAILED: patch "[PATCH] nvme: always punt polled uring_cmd end_io work to task_work" failed to apply to 6.6-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.6-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y git checkout FETCH_HEAD git cherry-pick -x 9ce6c9875f3e995be5fd720b65835291f8a609b1 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025062012-skydiver-undergrad-6e0f@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 9ce6c9875f3e995be5fd720b65835291f8a609b1 Mon Sep 17 00:00:00 2001 From: Jens Axboe <axboe(a)kernel.dk> Date: Fri, 13 Jun 2025 13:37:41 -0600 Subject: [PATCH] nvme: always punt polled uring_cmd end_io work to task_work Currently NVMe uring_cmd completions will complete locally, if they are polled. This is done because those completions are always invoked from task context. And while that is true, there's no guarantee that it's invoked under the right ring context, or even task. If someone does NVMe passthrough via multiple threads and with a limited number of poll queues, then ringA may find completions from ringB. For that case, completing the request may not be sound. Always just punt the passthrough completions via task_work, which will redirect the completion, if needed. Cc: stable(a)vger.kernel.org Fixes: 585079b6e425 ("nvme: wire up async polling for io passthrough commands") Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/drivers/nvme/host/ioctl.c b/drivers/nvme/host/ioctl.c index 0b50da2f1175..6b3ac8ae3f34 100644 --- a/drivers/nvme/host/ioctl.c +++ b/drivers/nvme/host/ioctl.c @@ -429,21 +429,14 @@ static enum rq_end_io_ret nvme_uring_cmd_end_io(struct request *req, pdu->result = le64_to_cpu(nvme_req(req)->result.u64); /* - * For iopoll, complete it directly. Note that using the uring_cmd - * helper for this is safe only because we check blk_rq_is_poll(). - * As that returns false if we're NOT on a polled queue, then it's - * safe to use the polled completion helper. - * - * Otherwise, move the completion to task work. + * IOPOLL could potentially complete this request directly, but + * if multiple rings are polling on the same queue, then it's possible + * for one ring to find completions for another ring. Punting the + * completion via task_work will always direct it to the right + * location, rather than potentially complete requests for ringA + * under iopoll invocations from ringB. */ - if (blk_rq_is_poll(req)) { - if (pdu->bio) - blk_rq_unmap_user(pdu->bio); - io_uring_cmd_iopoll_done(ioucmd, pdu->result, pdu->status); - } else { - io_uring_cmd_do_in_task_lazy(ioucmd, nvme_uring_task_cb); - } - + io_uring_cmd_do_in_task_lazy(ioucmd, nvme_uring_task_cb); return RQ_END_IO_FREE; }

6 months

3
2
0 0

[PATCH 5.10] scsi: lpfc: Move NPIV's transport unregistration to after resource clean up

by Anastasia Belova

From: Justin Tee <justin.tee(a)broadcom.com> commit 4ddf01f2f1504fa08b766e8cfeec558e9f8eef6c upstream. There are cases after NPIV deletion where the fabric switch still believes the NPIV is logged into the fabric. This occurs when a vport is unregistered before the Remove All DA_ID CT and LOGO ELS are sent to the fabric. Currently fc_remove_host(), which calls dev_loss_tmo for all D_IDs including the fabric D_ID, removes the last ndlp reference and frees the ndlp rport object. This sometimes causes the race condition where the final DA_ID and LOGO are skipped from being sent to the fabric switch. Fix by moving the fc_remove_host() and scsi_remove_host() calls after DA_ID and LOGO are sent. Signed-off-by: Justin Tee <justin.tee(a)broadcom.com> Link: https://lore.kernel.org/r/20240305200503.57317-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Anastasia Belova <abelova(a)astralinux.ru> --- Backport fix for CVE-2024-36952 drivers/scsi/lpfc/lpfc_vport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index aa4e451d5dc1..921630f71ee9 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -668,10 +668,6 @@ lpfc_vport_delete(struct fc_vport *fc_vport) ns_ndlp_referenced = true; } - /* Remove FC host and then SCSI host with the vport */ - fc_remove_host(shost); - scsi_remove_host(shost); - ndlp = lpfc_findnode_did(phba->pport, Fabric_DID); /* In case of driver unload, we shall not perform fabric logo as the @@ -783,6 +779,10 @@ lpfc_vport_delete(struct fc_vport *fc_vport) lpfc_nlp_put(ndlp); } + /* Remove FC host to break driver binding. */ + fc_remove_host(shost); + scsi_remove_host(shost); + lpfc_cleanup(vport); lpfc_sli_host_down(vport); -- 2.43.0

6 months

1
0
0 0

[PATCH] btrfs: populate otime when logging an inode item

by Qu Wenruo

[TEST FAILURE WITH EXPERIMENTAL FEATURES] When running test case generic/508, the test case will fail with the new btrfs shutdown support: generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad) --- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930 +++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930 @@ -1,2 +1,6 @@ QA output created by 508 Silence is golden +Before: +After : stat.btime = Thu Jan 1 09:30:00 1970 +Before: +After : stat.btime = Wed Jul 2 14:53:22 2025 ... (Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff) Ran: generic/508 Failures: generic/508 Failed 1 of 1 tests Please note that the test case requires shutdown support, thus the test case will be skipped using the current upstream kernel, as it doesn't have shutdown ioctl support. [CAUSE] The direct cause the 0 time stamp in the log tree: leaf 30507008 items 2 free space 16057 generation 9 owner TREE_LOG leaf 30507008 flags 0x1(WRITTEN) backref revision 1 checksum stored e522548d checksum calced e522548d fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0 chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398 item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 9 transid 9 size 0 nbytes 0 block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0 sequence 1 flags 0x0(none) atime 1751432947.492000000 (2025-07-02 14:39:07) ctime 1751432947.492000000 (2025-07-02 14:39:07) mtime 1751432947.492000000 (2025-07-02 14:39:07) otime 0.0 (1970-01-01 09:30:00) <<< But the old fs tree has all the correct time stamp: btrfs-progs v6.12 fs tree key (FS_TREE ROOT_ITEM 0) leaf 30425088 items 2 free space 16061 generation 5 owner FS_TREE leaf 30425088 flags 0x1(WRITTEN) backref revision 1 checksum stored 48f6c57e checksum calced 48f6c57e fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0 chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398 item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 3 transid 0 size 0 nbytes 16384 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0(none) atime 1751432947.0 (2025-07-02 14:39:07) ctime 1751432947.0 (2025-07-02 14:39:07) mtime 1751432947.0 (2025-07-02 14:39:07) otime 1751432947.0 (2025-07-02 14:39:07) <<< The root cause is that fill_inode_item() in tree-log.c is only populating a/c/m time, not the otime (or btime in statx output). Part of the reason is that, the vfs inode only has a/c/m time, no native btime support yet. [FIX] Thankfully btrfs has its otime stored in btrfs_inode::i_otime_sec and btrfs_inode::i_otime_nsec. So what we really need is just fill the otime time stamp in fill_inode_item() of tree-log.c There is another fill_inode_item() in inode.c, which is doing the proper otime population. CC: stable(a)vger.kernel.org Signed-off-by: Qu Wenruo <wqu(a)suse.com> --- fs/btrfs/tree-log.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 7e52d8f92e5b..5bdd89c44193 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -4233,6 +4233,9 @@ static void fill_inode_item(struct btrfs_trans_handle *trans, btrfs_set_timespec_sec(leaf, &item->ctime, inode_get_ctime_sec(inode)); btrfs_set_timespec_nsec(leaf, &item->ctime, inode_get_ctime_nsec(inode)); + btrfs_set_timespec_sec(leaf, &item->otime, BTRFS_I(inode)->i_otime_sec); + btrfs_set_timespec_nsec(leaf, &item->otime, BTRFS_I(inode)->i_otime_nsec); + /* * We do not need to set the nbytes field, in fact during a fast fsync * its value may not even be correct, since a fast fsync does not wait -- 2.50.0

6 months

2
1
0 0

[PATCH v2] mtd: rawnand: atmel: Add missing check after DMA map

by Thomas Fourier

The DMA map functions can fail and should be tested for errors. Fixes: 4774fb0a48aa ("mtd: nand/fsmc: Add DMA support") Signed-off-by: Thomas Fourier <fourier.thomas(a)gmail.com> --- v1 -> v2: - Add stable(a)vger.kernel.org - Fix subject prefix drivers/mtd/nand/raw/fsmc_nand.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c index d579d5dd60d6..df61db8ce466 100644 --- a/drivers/mtd/nand/raw/fsmc_nand.c +++ b/drivers/mtd/nand/raw/fsmc_nand.c @@ -503,6 +503,8 @@ static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len, dma_dev = chan->device; dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction); + if (dma_mapping_error(dma_dev->dev, dma_addr)) + return -EINVAL; if (direction == DMA_TO_DEVICE) { dma_src = dma_addr; -- 2.43.0

6 months

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror July 2025