The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 3ab2011ea368ec3433ad49e1b9e1c7b70d2e65df Mon Sep 17 00:00:00 2001
From: Tadeusz Struk <tadeusz.struk(a)intel.com>
Date: Tue, 22 May 2018 14:37:18 -0700
Subject: [PATCH] tpm: fix race condition in tpm_common_write()
There is a race condition in tpm_common_write function allowing
two threads on the same /dev/tpm<N>, or two different applications
on the same /dev/tpmrm<N> to overwrite each other commands/responses.
Fixed this by taking the priv->buffer_mutex early in the function.
Also converted the priv->data_pending from atomic to a regular size_t
type. There is no need for it to be atomic since it is only touched
under the protection of the priv->buffer_mutex.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable(a)vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk(a)intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen(a)linux.intel.com>
diff --git a/drivers/char/tpm/tpm-dev-common.c b/drivers/char/tpm/tpm-dev-common.c
index 230b99288024..e4a04b2d3c32 100644
--- a/drivers/char/tpm/tpm-dev-common.c
+++ b/drivers/char/tpm/tpm-dev-common.c
@@ -37,7 +37,7 @@ static void timeout_work(struct work_struct *work)
struct file_priv *priv = container_of(work, struct file_priv, work);
mutex_lock(&priv->buffer_mutex);
- atomic_set(&priv->data_pending, 0);
+ priv->data_pending = 0;
memset(priv->data_buffer, 0, sizeof(priv->data_buffer));
mutex_unlock(&priv->buffer_mutex);
}
@@ -46,7 +46,6 @@ void tpm_common_open(struct file *file, struct tpm_chip *chip,
struct file_priv *priv)
{
priv->chip = chip;
- atomic_set(&priv->data_pending, 0);
mutex_init(&priv->buffer_mutex);
timer_setup(&priv->user_read_timer, user_reader_timeout, 0);
INIT_WORK(&priv->work, timeout_work);
@@ -58,29 +57,24 @@ ssize_t tpm_common_read(struct file *file, char __user *buf,
size_t size, loff_t *off)
{
struct file_priv *priv = file->private_data;
- ssize_t ret_size;
- ssize_t orig_ret_size;
+ ssize_t ret_size = 0;
int rc;
del_singleshot_timer_sync(&priv->user_read_timer);
flush_work(&priv->work);
- ret_size = atomic_read(&priv->data_pending);
- if (ret_size > 0) { /* relay data */
- orig_ret_size = ret_size;
- if (size < ret_size)
- ret_size = size;
+ mutex_lock(&priv->buffer_mutex);
- mutex_lock(&priv->buffer_mutex);
+ if (priv->data_pending) {
+ ret_size = min_t(ssize_t, size, priv->data_pending);
rc = copy_to_user(buf, priv->data_buffer, ret_size);
- memset(priv->data_buffer, 0, orig_ret_size);
+ memset(priv->data_buffer, 0, priv->data_pending);
if (rc)
ret_size = -EFAULT;
- mutex_unlock(&priv->buffer_mutex);
+ priv->data_pending = 0;
}
- atomic_set(&priv->data_pending, 0);
-
+ mutex_unlock(&priv->buffer_mutex);
return ret_size;
}
@@ -91,17 +85,19 @@ ssize_t tpm_common_write(struct file *file, const char __user *buf,
size_t in_size = size;
ssize_t out_size;
+ if (in_size > TPM_BUFSIZE)
+ return -E2BIG;
+
+ mutex_lock(&priv->buffer_mutex);
+
/* Cannot perform a write until the read has cleared either via
* tpm_read or a user_read_timer timeout. This also prevents split
* buffered writes from blocking here.
*/
- if (atomic_read(&priv->data_pending) != 0)
+ if (priv->data_pending != 0) {
+ mutex_unlock(&priv->buffer_mutex);
return -EBUSY;
-
- if (in_size > TPM_BUFSIZE)
- return -E2BIG;
-
- mutex_lock(&priv->buffer_mutex);
+ }
if (copy_from_user
(priv->data_buffer, (void __user *) buf, in_size)) {
@@ -132,7 +128,7 @@ ssize_t tpm_common_write(struct file *file, const char __user *buf,
return out_size;
}
- atomic_set(&priv->data_pending, out_size);
+ priv->data_pending = out_size;
mutex_unlock(&priv->buffer_mutex);
/* Set a timeout by which the reader must come claim the result */
@@ -149,5 +145,5 @@ void tpm_common_release(struct file *file, struct file_priv *priv)
del_singleshot_timer_sync(&priv->user_read_timer);
flush_work(&priv->work);
file->private_data = NULL;
- atomic_set(&priv->data_pending, 0);
+ priv->data_pending = 0;
}
diff --git a/drivers/char/tpm/tpm-dev.h b/drivers/char/tpm/tpm-dev.h
index ba3b6f9dacf7..b24cfb4d3ee1 100644
--- a/drivers/char/tpm/tpm-dev.h
+++ b/drivers/char/tpm/tpm-dev.h
@@ -8,7 +8,7 @@ struct file_priv {
struct tpm_chip *chip;
/* Data passed to and from the tpm via the read/write calls */
- atomic_t data_pending;
+ size_t data_pending;
struct mutex buffer_mutex;
struct timer_list user_read_timer; /* user needs to claim result */
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 2f872ddcdb1e8e2186162616cea4581b8403849d Mon Sep 17 00:00:00 2001
From: Miquel Raynal <miquel.raynal(a)bootlin.com>
Date: Tue, 22 May 2018 11:40:28 +0200
Subject: [PATCH] arm64: dts: marvell: fix CP110 ICU node size
ICU size in CP110 is not 0x10 but at least 0x440 bytes long (from the
specification).
Fixes: 6ef84a827c37 ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K")
Cc: stable(a)vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal(a)bootlin.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni(a)bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement(a)bootlin.com>
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index ed2f1237ea1e..8259b32f0ced 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -149,7 +149,7 @@
CP110_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
- reg = <0x1e0000 0x10>;
+ reg = <0x1e0000 0x440>;
#interrupt-cells = <3>;
interrupt-controller;
msi-parent = <&gicp>;
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From ac9816dcbab53c57bcf1d7b15370b08f1e284318 Mon Sep 17 00:00:00 2001
From: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com>
Date: Wed, 16 May 2018 17:32:14 +0530
Subject: [PATCH] powerpc/powernv/cpuidle: Init all present cpus for deep
states
Init all present cpus for deep states instead of "all possible" cpus.
Init fails if a possible cpu is guarded. Resulting in making only
non-deep states available for cpuidle/hotplug.
Stewart says, this means that for single threaded workloads, if you
guard out a CPU core you'll not get WoF (Workload Optimised
Frequency), which means that performance goes down when you wouldn't
expect it to.
Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus")
Cc: stable(a)vger.kernel.org # v3.19+
Signed-off-by: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au>
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 1f12ab1e6030..1c5d0675b43c 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -79,7 +79,7 @@ static int pnv_save_sprs_for_deep_states(void)
uint64_t msr_val = MSR_IDLE;
uint64_t psscr_val = pnv_deepest_stop_psscr_val;
- for_each_possible_cpu(cpu) {
+ for_each_present_cpu(cpu) {
uint64_t pir = get_hard_smp_processor_id(cpu);
uint64_t hsprg0_val = (uint64_t)paca_ptrs[cpu];
@@ -814,7 +814,7 @@ static int __init pnv_init_idle_states(void)
int cpu;
pr_info("powernv: idle: Saving PACA pointers of all CPUs in their thread sibling PACA\n");
- for_each_possible_cpu(cpu) {
+ for_each_present_cpu(cpu) {
int base_cpu = cpu_first_thread_sibling(cpu);
int idx = cpu_thread_in_core(cpu);
int i;
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From ac9816dcbab53c57bcf1d7b15370b08f1e284318 Mon Sep 17 00:00:00 2001
From: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com>
Date: Wed, 16 May 2018 17:32:14 +0530
Subject: [PATCH] powerpc/powernv/cpuidle: Init all present cpus for deep
states
Init all present cpus for deep states instead of "all possible" cpus.
Init fails if a possible cpu is guarded. Resulting in making only
non-deep states available for cpuidle/hotplug.
Stewart says, this means that for single threaded workloads, if you
guard out a CPU core you'll not get WoF (Workload Optimised
Frequency), which means that performance goes down when you wouldn't
expect it to.
Fixes: 77b54e9f213f ("powernv/powerpc: Add winkle support for offline cpus")
Cc: stable(a)vger.kernel.org # v3.19+
Signed-off-by: Akshay Adiga <akshay.adiga(a)linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe(a)ellerman.id.au>
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 1f12ab1e6030..1c5d0675b43c 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -79,7 +79,7 @@ static int pnv_save_sprs_for_deep_states(void)
uint64_t msr_val = MSR_IDLE;
uint64_t psscr_val = pnv_deepest_stop_psscr_val;
- for_each_possible_cpu(cpu) {
+ for_each_present_cpu(cpu) {
uint64_t pir = get_hard_smp_processor_id(cpu);
uint64_t hsprg0_val = (uint64_t)paca_ptrs[cpu];
@@ -814,7 +814,7 @@ static int __init pnv_init_idle_states(void)
int cpu;
pr_info("powernv: idle: Saving PACA pointers of all CPUs in their thread sibling PACA\n");
- for_each_possible_cpu(cpu) {
+ for_each_present_cpu(cpu) {
int base_cpu = cpu_first_thread_sibling(cpu);
int idx = cpu_thread_in_core(cpu);
int i;
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 8a301eb16d99983a4961f884690ec97b92e7dcfe Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj(a)kernel.org>
Date: Fri, 2 Feb 2018 09:54:14 -0800
Subject: [PATCH] fuse: fix congested state leak on aborted connections
If a connection gets aborted while congested, FUSE can leave
nr_wb_congested[] stuck until reboot causing wait_iff_congested() to
wait spuriously which can lead to severe performance degradation.
The leak is caused by gating congestion state clearing with
fc->connected test in request_end(). This was added way back in 2009
by 26c3679101db ("fuse: destroy bdi on umount"). While the commit
description doesn't explain why the test was added, it most likely was
to avoid dereferencing bdi after it got destroyed.
Since then, bdi lifetime rules have changed many times and now we're
always guaranteed to have access to the bdi while the superblock is
alive (fc->sb).
Drop fc->connected conditional to avoid leaking congestion states.
Signed-off-by: Tejun Heo <tj(a)kernel.org>
Reported-by: Joshua Miller <joshmiller(a)fb.com>
Cc: Johannes Weiner <hannes(a)cmpxchg.org>
Cc: stable(a)vger.kernel.org # v2.6.29+
Acked-by: Jan Kara <jack(a)suse.cz>
Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com>
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 686631f12001..e03ca14f40e9 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -385,8 +385,7 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req)
if (!fc->blocked && waitqueue_active(&fc->blocked_waitq))
wake_up(&fc->blocked_waitq);
- if (fc->num_background == fc->congestion_threshold &&
- fc->connected && fc->sb) {
+ if (fc->num_background == fc->congestion_threshold && fc->sb) {
clear_bdi_congested(fc->sb->s_bdi, BLK_RW_SYNC);
clear_bdi_congested(fc->sb->s_bdi, BLK_RW_ASYNC);
}
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 8a301eb16d99983a4961f884690ec97b92e7dcfe Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj(a)kernel.org>
Date: Fri, 2 Feb 2018 09:54:14 -0800
Subject: [PATCH] fuse: fix congested state leak on aborted connections
If a connection gets aborted while congested, FUSE can leave
nr_wb_congested[] stuck until reboot causing wait_iff_congested() to
wait spuriously which can lead to severe performance degradation.
The leak is caused by gating congestion state clearing with
fc->connected test in request_end(). This was added way back in 2009
by 26c3679101db ("fuse: destroy bdi on umount"). While the commit
description doesn't explain why the test was added, it most likely was
to avoid dereferencing bdi after it got destroyed.
Since then, bdi lifetime rules have changed many times and now we're
always guaranteed to have access to the bdi while the superblock is
alive (fc->sb).
Drop fc->connected conditional to avoid leaking congestion states.
Signed-off-by: Tejun Heo <tj(a)kernel.org>
Reported-by: Joshua Miller <joshmiller(a)fb.com>
Cc: Johannes Weiner <hannes(a)cmpxchg.org>
Cc: stable(a)vger.kernel.org # v2.6.29+
Acked-by: Jan Kara <jack(a)suse.cz>
Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com>
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 686631f12001..e03ca14f40e9 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -385,8 +385,7 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req)
if (!fc->blocked && waitqueue_active(&fc->blocked_waitq))
wake_up(&fc->blocked_waitq);
- if (fc->num_background == fc->congestion_threshold &&
- fc->connected && fc->sb) {
+ if (fc->num_background == fc->congestion_threshold && fc->sb) {
clear_bdi_congested(fc->sb->s_bdi, BLK_RW_SYNC);
clear_bdi_congested(fc->sb->s_bdi, BLK_RW_ASYNC);
}
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable(a)vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 756b56a9e832e063edc83be7c3889e98c536dd2b Mon Sep 17 00:00:00 2001
From: "Steven Rostedt (VMware)" <rostedt(a)goodmis.org>
Date: Mon, 14 May 2018 15:40:29 -0400
Subject: [PATCH] ftrace/selftest: Have the reset_trigger code be a bit more
careful
The trigger code is picky in how it can be disabled as there may be
dependencies between different events and synthetic events. Change the order
on how triggers are reset.
1) Reset triggers of all synthetic events first
2) Remove triggers with actions attached to them
3) Remove all other triggers
If this order isn't followed, then some triggers will not be reset, and an
error may happen because a trigger is busy.
Cc: stable(a)vger.kernel.org
Fixes: cfa0963dc474f ("kselftests/ftrace : Add event trigger testcases")
Reviewed-by: Namhyung Kim <namhyung(a)kernel.org>
Acked-by: Masami Hiramatsu <mhiramat(a)kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org>
diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
index 2a4f16fc9819..8393b1c06027 100644
--- a/tools/testing/selftests/ftrace/test.d/functions
+++ b/tools/testing/selftests/ftrace/test.d/functions
@@ -15,14 +15,29 @@ reset_tracer() { # reset the current tracer
echo nop > current_tracer
}
-reset_trigger() { # reset all current setting triggers
- grep -v ^# events/*/*/trigger |
+reset_trigger_file() {
+ # remove action triggers first
+ grep -H ':on[^:]*(' $@ |
+ while read line; do
+ cmd=`echo $line | cut -f2- -d: | cut -f1 -d" "`
+ file=`echo $line | cut -f1 -d:`
+ echo "!$cmd" >> $file
+ done
+ grep -Hv ^# $@ |
while read line; do
cmd=`echo $line | cut -f2- -d: | cut -f1 -d" "`
- echo "!$cmd" > `echo $line | cut -f1 -d:`
+ file=`echo $line | cut -f1 -d:`
+ echo "!$cmd" > $file
done
}
+reset_trigger() { # reset all current setting triggers
+ if [ -d events/synthetic ]; then
+ reset_trigger_file events/synthetic/*/trigger
+ fi
+ reset_trigger_file events/*/*/trigger
+}
+
reset_events_filter() { # reset all current setting filters
grep -v ^none events/*/*/filter |
while read line; do