- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] PM / OPP: Update voltage in case freq == old_freq" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c5c2a97b3ac7d1ec19e7cff9e38caca6afefc3de Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz <waldemar.rymarkiewicz(a)gmail.com> Date: Thu, 14 Jun 2018 15:56:08 +0200 Subject: [PATCH] PM / OPP: Update voltage in case freq == old_freq This commit fixes a rare but possible case when the clk rate is updated without update of the regulator voltage. At boot up, CPUfreq checks if the system is running at the right freq. This is a sanity check in case a bootloader set clk rate that is outside of freq table present with cpufreq core. In such cases system can be unstable so better to change it to a freq that is preset in freq-table. The CPUfreq takes next freq that is >= policy->cur and this is our target_freq that needs to be set now. dev_pm_opp_set_rate(dev, target_freq) checks the target_freq and the old_freq (a current rate). If these are equal it returns early. If not, it searches for OPP (old_opp) that fits best to old_freq (not listed in the table) and updates old_freq (!). Here, we can end up with old_freq = old_opp.rate = target_freq, which is not handled in _generic_set_opp_regulator(). It's supposed to update voltage only when freq > old_freq || freq > old_freq. if (freq > old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); [...] if (freq < old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) It results in, no voltage update while clk rate is updated. Example: freq-table = { 1000MHz 1.15V 666MHZ 1.10V 333MHz 1.05V } boot-up-freq = 800MHz # not listed in freq-table freq = target_freq = 1GHz old_freq = 800Mhz old_opp = _find_freq_ceil(opp_table, &old_freq); #(old_freq is modified!) old_freq = 1GHz Fixes: 6a0712f6f199 ("PM / OPP: Add dev_pm_opp_set_rate()") Cc: 4.6+ <stable(a)vger.kernel.org> # v4.6+ Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz(a)gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> diff --git a/drivers/opp/core.c b/drivers/opp/core.c index ab2f3fead6b1..31ff03dbeb83 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -598,7 +598,7 @@ static int _generic_set_opp_regulator(const struct opp_table *opp_table, } /* Scaling up? Scale voltage before frequency */ - if (freq > old_freq) { + if (freq >= old_freq) { ret = _set_opp_voltage(dev, reg, new_supply); if (ret) goto restore_voltage;

7 years

1
0
0 0

[PATCH 4.4] serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version

by Daniel Wagner

From: Daniel Wagner <daniel.wagner(a)siemens.com> [ Upstream commit 8afb1d2c12163f77777f84616a8e9444d0050ebe ] Commit 40f70c03e33a ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Signed-off-by: Daniel Wagner <daniel.wagner(a)siemens.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> [dw: Backported to 4.4.] Signed-off-by: Daniel Wagner <daniel.wagner(a)siemens.com> --- drivers/tty/serial/sh-sci.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 8dd822feb972..b63920481b1d 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2419,13 +2419,12 @@ static void serial_console_write(struct console *co, const char *s, unsigned long flags; int locked = 1; - local_irq_save(flags); if (port->sysrq) locked = 0; else if (oops_in_progress) - locked = spin_trylock(&port->lock); + locked = spin_trylock_irqsave(&port->lock, flags); else - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); /* first save the SCSCR then disable the interrupts */ ctrl = serial_port_in(port, SCSCR); @@ -2442,8 +2441,7 @@ static void serial_console_write(struct console *co, const char *s, serial_port_out(port, SCSCR, ctrl); if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); + spin_unlock_irqrestore(&port->lock, flags); } static int serial_console_setup(struct console *co, char *options) -- 2.14.4

7 years

4
7
0 0

FAILED: patch "[PATCH] spi: spi-s3c64xx: Fix system resume support" failed to apply to 4.17-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.17-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From e935dba111621bd6a0c5d48e6511a4d9885103b4 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski <m.szyprowski(a)samsung.com> Date: Wed, 16 May 2018 10:42:39 +0200 Subject: [PATCH] spi: spi-s3c64xx: Fix system resume support Since Linux v4.10 release (commit 1d9174fbc55e "PM / Runtime: Defer resuming of the device in pm_runtime_force_resume()"), pm_runtime_force_resume() function doesn't runtime resume device if it was not runtime active before system suspend. Thus, driver should not do any register access after pm_runtime_force_resume() without checking the runtime status of the device. To fix this issue, simply move s3c64xx_spi_hwinit() call to s3c64xx_spi_runtime_resume() to ensure that hardware is always properly initialized. This fixes Synchronous external abort issue on system suspend/resume cycle on newer Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk(a)kernel.org> Signed-off-by: Mark Brown <broonie(a)kernel.org> Cc: stable(a)vger.kernel.org diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index f55dc78957ad..7b7151ec14c8 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1292,8 +1292,6 @@ static int s3c64xx_spi_resume(struct device *dev) if (ret < 0) return ret; - s3c64xx_spi_hwinit(sdd); - return spi_master_resume(master); } #endif /* CONFIG_PM_SLEEP */ @@ -1331,6 +1329,8 @@ static int s3c64xx_spi_runtime_resume(struct device *dev) if (ret != 0) goto err_disable_src_clk; + s3c64xx_spi_hwinit(sdd); + return 0; err_disable_src_clk:

7 years

1
0
0 0

[PATCH v2 3/6] crypto: ccree: fix iv handling

by Gilad Ben-Yossef

We were copying our last cipher block into the request for use as IV for all modes of operations. Fix this by discerning the behaviour based on the mode of operation used: copy ciphertext for CBC, update counter for CTR. CC: stable(a)vger.kernel.org Fixes: 63ee04c8b491 ("crypto: ccree - add skcipher support") Reported by: Hadar Gat <hadar.gat(a)arm.com> Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> --- drivers/crypto/ccree/cc_cipher.c | 111 +++++++++++++++++++++++++++++---------- 1 file changed, 84 insertions(+), 27 deletions(-) diff --git a/drivers/crypto/ccree/cc_cipher.c b/drivers/crypto/ccree/cc_cipher.c index d2810c1..958ced3 100644 --- a/drivers/crypto/ccree/cc_cipher.c +++ b/drivers/crypto/ccree/cc_cipher.c @@ -593,34 +593,82 @@ static void cc_setup_cipher_data(struct crypto_tfm *tfm, } } +/* + * Update a CTR-AES 128 bit counter + */ +static void cc_update_ctr(u8 *ctr, unsigned int increment) +{ + if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) || + IS_ALIGNED((unsigned long)ctr, 8)) { + + __be64 *high_be = (__be64 *)ctr; + __be64 *low_be = high_be + 1; + u64 orig_low = __be64_to_cpu(*low_be); + u64 new_low = orig_low + (u64)increment; + + *low_be = __cpu_to_be64(new_low); + + if (new_low < orig_low) + *high_be = __cpu_to_be64(__be64_to_cpu(*high_be) + 1); + } else { + u8 *pos = (ctr + AES_BLOCK_SIZE); + u8 val; + unsigned int size; + + for (; increment; increment--) + for (size = AES_BLOCK_SIZE; size; size--) { + val = *--pos + 1; + *pos = val; + if (val) + break; + } + } +} + static void cc_cipher_complete(struct device *dev, void *cc_req, int err) { struct skcipher_request *req = (struct skcipher_request *)cc_req; struct scatterlist *dst = req->dst; struct scatterlist *src = req->src; struct cipher_req_ctx *req_ctx = skcipher_request_ctx(req); - struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); - unsigned int ivsize = crypto_skcipher_ivsize(tfm); + struct crypto_skcipher *sk_tfm = crypto_skcipher_reqtfm(req); + struct crypto_tfm *tfm = crypto_skcipher_tfm(sk_tfm); + struct cc_cipher_ctx *ctx_p = crypto_tfm_ctx(tfm); + unsigned int ivsize = crypto_skcipher_ivsize(sk_tfm); + unsigned int len; - cc_unmap_cipher_request(dev, req_ctx, ivsize, src, dst); - kzfree(req_ctx->iv); + switch (ctx_p->cipher_mode) { + case DRV_CIPHER_CBC: + /* + * The crypto API expects us to set the req->iv to the last + * ciphertext block. For encrypt, simply copy from the result. + * For decrypt, we must copy from a saved buffer since this + * could be an in-place decryption operation and the src is + * lost by this point. + */ + if (req_ctx->gen_ctx.op_type == DRV_CRYPTO_DIRECTION_DECRYPT) { + memcpy(req->iv, req_ctx->backup_info, ivsize); + kzfree(req_ctx->backup_info); + } else if (!err) { + len = req->cryptlen - ivsize; + scatterwalk_map_and_copy(req->iv, req->dst, len, + ivsize, 0); + } + break; - /* - * The crypto API expects us to set the req->iv to the last - * ciphertext block. For encrypt, simply copy from the result. - * For decrypt, we must copy from a saved buffer since this - * could be an in-place decryption operation and the src is - * lost by this point. - */ - if (req_ctx->gen_ctx.op_type == DRV_CRYPTO_DIRECTION_DECRYPT) { - memcpy(req->iv, req_ctx->backup_info, ivsize); - kzfree(req_ctx->backup_info); - } else if (!err) { - scatterwalk_map_and_copy(req->iv, req->dst, - (req->cryptlen - ivsize), - ivsize, 0); + case DRV_CIPHER_CTR: + /* Compute the counter of the last block */ + len = ALIGN(req->cryptlen, AES_BLOCK_SIZE) / AES_BLOCK_SIZE; + cc_update_ctr((u8 *)req->iv, len); + break; + + default: + break; } + cc_unmap_cipher_request(dev, req_ctx, ivsize, src, dst); + kzfree(req_ctx->iv); + skcipher_request_complete(req, err); } @@ -752,20 +800,29 @@ static int cc_cipher_encrypt(struct skcipher_request *req) static int cc_cipher_decrypt(struct skcipher_request *req) { struct crypto_skcipher *sk_tfm = crypto_skcipher_reqtfm(req); + struct crypto_tfm *tfm = crypto_skcipher_tfm(sk_tfm); + struct cc_cipher_ctx *ctx_p = crypto_tfm_ctx(tfm); struct cipher_req_ctx *req_ctx = skcipher_request_ctx(req); unsigned int ivsize = crypto_skcipher_ivsize(sk_tfm); gfp_t flags = cc_gfp_flags(&req->base); + unsigned int len; - /* - * Allocate and save the last IV sized bytes of the source, which will - * be lost in case of in-place decryption and might be needed for CTS. - */ - req_ctx->backup_info = kmalloc(ivsize, flags); - if (!req_ctx->backup_info) - return -ENOMEM; + if (ctx_p->cipher_mode == DRV_CIPHER_CBC) { + + /* Allocate and save the last IV sized bytes of the source, + * which will be lost in case of in-place decryption. + */ + req_ctx->backup_info = kzalloc(ivsize, flags); + if (!req_ctx->backup_info) + return -ENOMEM; + + len = req->cryptlen - ivsize; + scatterwalk_map_and_copy(req_ctx->backup_info, req->src, len, + ivsize, 0); + } else { + req_ctx->backup_info = NULL; + } - scatterwalk_map_and_copy(req_ctx->backup_info, req->src, - (req->cryptlen - ivsize), ivsize, 0); req_ctx->is_giv = false; return cc_cipher_process(req, DRV_CRYPTO_DIRECTION_DECRYPT); -- 2.7.4

7 years

1
0
0 0

[PATCH v2 1/6] crypto: ccree: fix finup

by Gilad Ben-Yossef

From: Hadar Gat <hadar.gat(a)arm.com> finup() operation was incorrect, padding was missing. Fix by setting the ccree HW to enable padding. Signed-off-by: Hadar Gat <hadar.gat(a)arm.com> [ gilad(a)benyossef.com: refactored for better code sharing ] Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com> Cc: stable(a)vger.kernel.org --- drivers/crypto/ccree/cc_hash.c | 81 +++++++++--------------------------------- 1 file changed, 16 insertions(+), 65 deletions(-) diff --git a/drivers/crypto/ccree/cc_hash.c b/drivers/crypto/ccree/cc_hash.c index 96ff777..e4ebde0 100644 --- a/drivers/crypto/ccree/cc_hash.c +++ b/drivers/crypto/ccree/cc_hash.c @@ -602,66 +602,7 @@ static int cc_hash_update(struct ahash_request *req) return rc; } -static int cc_hash_finup(struct ahash_request *req) -{ - struct ahash_req_ctx *state = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct cc_hash_ctx *ctx = crypto_ahash_ctx(tfm); - u32 digestsize = crypto_ahash_digestsize(tfm); - struct scatterlist *src = req->src; - unsigned int nbytes = req->nbytes; - u8 *result = req->result; - struct device *dev = drvdata_to_dev(ctx->drvdata); - bool is_hmac = ctx->is_hmac; - struct cc_crypto_req cc_req = {}; - struct cc_hw_desc desc[CC_MAX_HASH_SEQ_LEN]; - unsigned int idx = 0; - int rc; - gfp_t flags = cc_gfp_flags(&req->base); - - dev_dbg(dev, "===== %s-finup (%d) ====\n", is_hmac ? "hmac" : "hash", - nbytes); - - if (cc_map_req(dev, state, ctx)) { - dev_err(dev, "map_ahash_source() failed\n"); - return -EINVAL; - } - - if (cc_map_hash_request_final(ctx->drvdata, state, src, nbytes, 1, - flags)) { - dev_err(dev, "map_ahash_request_final() failed\n"); - cc_unmap_req(dev, state, ctx); - return -ENOMEM; - } - if (cc_map_result(dev, state, digestsize)) { - dev_err(dev, "map_ahash_digest() failed\n"); - cc_unmap_hash_request(dev, state, src, true); - cc_unmap_req(dev, state, ctx); - return -ENOMEM; - } - - /* Setup request structure */ - cc_req.user_cb = cc_hash_complete; - cc_req.user_arg = req; - - idx = cc_restore_hash(desc, ctx, state, idx); - - if (is_hmac) - idx = cc_fin_hmac(desc, req, idx); - - idx = cc_fin_result(desc, req, idx); - - rc = cc_send_request(ctx->drvdata, &cc_req, desc, idx, &req->base); - if (rc != -EINPROGRESS && rc != -EBUSY) { - dev_err(dev, "send_request() failed (rc=%d)\n", rc); - cc_unmap_hash_request(dev, state, src, true); - cc_unmap_result(dev, state, digestsize, result); - cc_unmap_req(dev, state, ctx); - } - return rc; -} - -static int cc_hash_final(struct ahash_request *req) +static int cc_do_finup(struct ahash_request *req, bool update) { struct ahash_req_ctx *state = ahash_request_ctx(req); struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); @@ -678,21 +619,20 @@ static int cc_hash_final(struct ahash_request *req) int rc; gfp_t flags = cc_gfp_flags(&req->base); - dev_dbg(dev, "===== %s-final (%d) ====\n", is_hmac ? "hmac" : "hash", - nbytes); + dev_dbg(dev, "===== %s-%s (%d) ====\n", is_hmac ? "hmac" : "hash", + update ? "finup" : "final", nbytes); if (cc_map_req(dev, state, ctx)) { dev_err(dev, "map_ahash_source() failed\n"); return -EINVAL; } - if (cc_map_hash_request_final(ctx->drvdata, state, src, nbytes, 0, + if (cc_map_hash_request_final(ctx->drvdata, state, src, nbytes, update, flags)) { dev_err(dev, "map_ahash_request_final() failed\n"); cc_unmap_req(dev, state, ctx); return -ENOMEM; } - if (cc_map_result(dev, state, digestsize)) { dev_err(dev, "map_ahash_digest() failed\n"); cc_unmap_hash_request(dev, state, src, true); @@ -706,7 +646,7 @@ static int cc_hash_final(struct ahash_request *req) idx = cc_restore_hash(desc, ctx, state, idx); - /* "DO-PAD" must be enabled only when writing current length to HW */ + /* Pad the hash */ hw_desc_init(&desc[idx]); set_cipher_do(&desc[idx], DO_PAD); set_cipher_mode(&desc[idx], ctx->hw_mode); @@ -731,6 +671,17 @@ static int cc_hash_final(struct ahash_request *req) return rc; } +static int cc_hash_finup(struct ahash_request *req) +{ + return cc_do_finup(req, true); +} + + +static int cc_hash_final(struct ahash_request *req) +{ + return cc_do_finup(req, false); +} + static int cc_hash_init(struct ahash_request *req) { struct ahash_req_ctx *state = ahash_request_ctx(req); -- 2.7.4

7 years

1
0
0 0

[PATCH v3] ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl

by Nick Dyer

The pinctrl settings were incorrect for the touchscreen interrupt line, causing an interrupt storm. This change has been tested with both the atmel_mxt_ts and RMI4 drivers on the RDU1 units. The value 0x4 comes from the value of register IOMUXC_SW_PAD_CTL_PAD_CSI1_D8 from the old vendor kernel. Signed-off-by: Nick Dyer <nick(a)shmanahar.org> Fixes: ceef0396f367 ("ARM: dts: imx: add ZII RDU1 board") Cc: <stable(a)vger.kernel.org> # 4.15+ --- Changes in v3: - Update commit message to add source of 0x4 value, fixes tag and CC stable Changes in v2: - Use hex, only alter IRQ line config arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index df9eca94d812..8a878687197b 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -770,7 +770,7 @@ pinctrl_ts: tsgrp { fsl,pins = < - MX51_PAD_CSI1_D8__GPIO3_12 0x85 + MX51_PAD_CSI1_D8__GPIO3_12 0x04 MX51_PAD_CSI1_D9__GPIO3_13 0x85 >; }; -- 2.17.1

7 years

4
5
0 0

[merged] kasan-depend-on-config_slub_debug.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: kasan: depend on CONFIG_SLUB_DEBUG has been removed from the -mm tree. Its filename was kasan-depend-on-config_slub_debug.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Subject: kasan: depend on CONFIG_SLUB_DEBUG KASAN depends on having access to some of the accounting that SLUB_DEBUG does; without it, there are immediate crashes [1]. So, the natural thing to do is to make KASAN select SLUB_DEBUG. [1] http://lkml.kernel.org/r/CAHmME9rtoPwxUSnktxzKso14iuVCWT7BE_-_8PAC=pGw1iJnQ… Link: http://lkml.kernel.org/r/20180622154623.25388-1-Jason@zx2c4.com Fixes: f9e13c0a5a33 ("slab, slub: skip unnecessary kasan_cache_shutdown()") Signed-off-by: Jason A. Donenfeld <Jason(a)zx2c4.com> Acked-by: Michal Hocko <mhocko(a)suse.com> Reviewed-by: Shakeel Butt <shakeelb(a)google.com> Acked-by: Christoph Lameter <cl(a)linux.com> Cc: Shakeel Butt <shakeelb(a)google.com> Cc: David Rientjes <rientjes(a)google.com> Cc: Pekka Enberg <penberg(a)kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim(a)lge.com> Cc: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN lib/Kconfig.kasan~kasan-depend-on-config_slub_debug lib/Kconfig.kasan --- a/lib/Kconfig.kasan~kasan-depend-on-config_slub_debug +++ a/lib/Kconfig.kasan @@ -6,6 +6,7 @@ if HAVE_ARCH_KASAN config KASAN bool "KASan: runtime memory debugger" depends on SLUB || (SLAB && !DEBUG_SLAB) + select SLUB_DEBUG if SLUB select CONSTRUCTORS select STACKDEPOT help _ Patches currently in -mm which might be from Jason(a)zx2c4.com are

7 years

1
0
0 0

[merged] x86-e820-put-e820_type_ram-regions-into-memblockreserved.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: x86/e820: put !E820_TYPE_RAM regions into memblock.reserved has been removed from the -mm tree. Its filename was x86-e820-put-e820_type_ram-regions-into-memblockreserved.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Naoya Horiguchi <n-horiguchi(a)ah.jp.nec.com> Subject: x86/e820: put !E820_TYPE_RAM regions into memblock.reserved There is a kernel panic that is triggered when reading /proc/kpageflags on the kernel booted with kernel parameter 'memmap=nn[KMG]!ss[KMG]': BUG: unable to handle kernel paging request at fffffffffffffffe PGD 9b20e067 P4D 9b20e067 PUD 9b210067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 2 PID: 1728 Comm: page-types Not tainted 4.17.0-rc6-mm1-v4.17-rc6-180605-0816-00236-g2dfb086ef02c+ #160 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.fc28 04/01/2014 RIP: 0010:stable_page_flags+0x27/0x3c0 Code: 00 00 00 0f 1f 44 00 00 48 85 ff 0f 84 a0 03 00 00 41 54 55 49 89 fc 53 48 8b 57 08 48 8b 2f 48 8d 42 ff 83 e2 01 48 0f 44 c7 <48> 8b 00 f6 c4 01 0f 84 10 03 00 00 31 db 49 8b 54 24 08 4c 89 e7 RSP: 0018:ffffbbd44111fde0 EFLAGS: 00010202 RAX: fffffffffffffffe RBX: 00007fffffffeff9 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000202 RDI: ffffed1182fff5c0 RBP: ffffffffffffffff R08: 0000000000000001 R09: 0000000000000001 R10: ffffbbd44111fed8 R11: 0000000000000000 R12: ffffed1182fff5c0 R13: 00000000000bffd7 R14: 0000000002fff5c0 R15: ffffbbd44111ff10 FS: 00007efc4335a500(0000) GS:ffff93a5bfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffffffffffffe CR3: 00000000b2a58000 CR4: 00000000001406e0 Call Trace: kpageflags_read+0xc7/0x120 proc_reg_read+0x3c/0x60 __vfs_read+0x36/0x170 vfs_read+0x89/0x130 ksys_pread64+0x71/0x90 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7efc42e75e23 Code: 09 00 ba 9f 01 00 00 e8 ab 81 f4 ff 66 2e 0f 1f 84 00 00 00 00 00 90 83 3d 29 0a 2d 00 00 75 13 49 89 ca b8 11 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 db d3 01 00 48 89 04 24 According to kernel bisection, this problem became visible due to commit f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") which changes how struct pages are initialized. Memblock layout affects the pfn ranges covered by node/zone. Consider that we have a VM with 2 NUMA nodes and each node has 4GB memory, and the default (no memmap= given) memblock layout is like below: MEMBLOCK configuration: memory size = 0x00000001fff75c00 reserved size = 0x000000000300c000 memory.cnt = 0x4 memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0 memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0 memory[0x2] [0x0000000100000000-0x000000013fffffff], 0x0000000040000000 bytes on node 0 flags: 0x0 memory[0x3] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0 ... If you give memmap=1G!4G (so it just covers memory[0x2]), the range [0x100000000-0x13fffffff] is gone: MEMBLOCK configuration: memory size = 0x00000001bff75c00 reserved size = 0x000000000300c000 memory.cnt = 0x3 memory[0x0] [0x0000000000001000-0x000000000009efff], 0x000000000009e000 bytes on node 0 flags: 0x0 memory[0x1] [0x0000000000100000-0x00000000bffd6fff], 0x00000000bfed7000 bytes on node 0 flags: 0x0 memory[0x2] [0x0000000140000000-0x000000023fffffff], 0x0000000100000000 bytes on node 1 flags: 0x0 ... This causes shrinking node 0's pfn range because it is calculated by the address range of memblock.memory. So some of struct pages in the gap range are left uninitialized. We have a function zero_resv_unavail() which does zeroing the struct pages within the reserved unavailable range (i.e. memblock.memory && !memblock.reserved). This patch utilizes it to cover all unavailable ranges by putting them into memblock.reserved. Link: http://lkml.kernel.org/r/20180615072947.GB23273@hori1.linux.bs1.fc.nec.co.jp Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: Naoya Horiguchi <n-horiguchi(a)ah.jp.nec.com> Tested-by: Oscar Salvador <osalvador(a)suse.de> Tested-by: "Herton R. Krzesinski" <herton(a)redhat.com> Acked-by: Michal Hocko <mhocko(a)suse.com> Reviewed-by: Pavel Tatashin <pasha.tatashin(a)oracle.com> Cc: Steven Sistare <steven.sistare(a)oracle.com> Cc: Daniel Jordan <daniel.m.jordan(a)oracle.com> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN arch/x86/kernel/e820.c~x86-e820-put-e820_type_ram-regions-into-memblockreserved arch/x86/kernel/e820.c --- a/arch/x86/kernel/e820.c~x86-e820-put-e820_type_ram-regions-into-memblockreserved +++ a/arch/x86/kernel/e820.c @@ -1248,6 +1248,7 @@ void __init e820__memblock_setup(void) { int i; u64 end; + u64 addr = 0; /* * The bootstrap memblock region count maximum is 128 entries @@ -1264,13 +1265,21 @@ void __init e820__memblock_setup(void) struct e820_entry *entry = &e820_table->entries[i]; end = entry->addr + entry->size; + if (addr < entry->addr) + memblock_reserve(addr, entry->addr - addr); + addr = end; if (end != (resource_size_t)end) continue; + /* + * all !E820_TYPE_RAM ranges (including gap ranges) are put + * into memblock.reserved to make sure that struct pages in + * such regions are not left uninitialized after bootup. + */ if (entry->type != E820_TYPE_RAM && entry->type != E820_TYPE_RESERVED_KERN) - continue; - - memblock_add(entry->addr, entry->size); + memblock_reserve(entry->addr, entry->size); + else + memblock_add(entry->addr, entry->size); } /* Throw away partial pages: */ _ Patches currently in -mm which might be from n-horiguchi(a)ah.jp.nec.com are

7 years

1
0
0 0

[merged] slub-fix-failure-when-we-delete-and-create-a-slab-cache.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: slub: fix failure when we delete and create a slab cache has been removed from the -mm tree. Its filename was slub-fix-failure-when-we-delete-and-create-a-slab-cache.patch This patch was dropped because it was merged into mainline or a subsystem tree ------------------------------------------------------ From: Mikulas Patocka <mpatocka(a)redhat.com> Subject: slub: fix failure when we delete and create a slab cache In kernel 4.17 I removed some code from dm-bufio that did slab cache merging (21bb13276768) - both slab and slub support merging caches with identical attributes, so dm-bufio now just calls kmem_cache_create and relies on implicit merging. This uncovered a bug in the slub subsystem - if we delete a cache and immediatelly create another cache with the same attributes, it fails because of duplicate filename in /sys/kernel/slab/. The slub subsystem offloads freeing the cache to a workqueue - and if we create the new cache before the workqueue runs, it complains because of duplicate filename in sysfs. This patch fixes the bug by moving the call of kobject_del from sysfs_slab_remove_workfn to shutdown_cache. kobject_del must be called while we hold slab_mutex - so that the sysfs entry is deleted before a cache with the same attributes could be created. Running device-mapper-test-suite with: dmtest run --suite thin-provisioning -n /commit_failure_causes_fallback/ triggers: [ 119.618958] Buffer I/O error on dev dm-0, logical block 1572848, async page read [ 119.686224] device-mapper: thin: 253:1: metadata operation 'dm_pool_alloc_data_block' failed: error = -5 [ 119.695821] device-mapper: thin: 253:1: aborting current metadata transaction [ 119.703255] sysfs: cannot create duplicate filename '/kernel/slab/:a-0000144' [ 119.710394] CPU: 2 PID: 1037 Comm: kworker/u48:1 Not tainted 4.17.0.snitm+ #25 [ 119.717608] Hardware name: Supermicro SYS-1029P-WTR/X11DDW-L, BIOS 2.0a 12/06/2017 [ 119.725177] Workqueue: dm-thin do_worker [dm_thin_pool] [ 119.730401] Call Trace: [ 119.732856] dump_stack+0x5a/0x73 [ 119.736173] sysfs_warn_dup+0x58/0x70 [ 119.739839] sysfs_create_dir_ns+0x77/0x80 [ 119.743939] kobject_add_internal+0xba/0x2e0 [ 119.748210] kobject_init_and_add+0x70/0xb0 [ 119.752399] ? sysfs_slab_add+0x101/0x250 [ 119.756409] sysfs_slab_add+0xb1/0x250 [ 119.760161] __kmem_cache_create+0x116/0x150 [ 119.764436] ? number+0x2fb/0x340 [ 119.767755] ? _cond_resched+0x15/0x30 [ 119.771508] create_cache+0xd9/0x1f0 [ 119.775085] kmem_cache_create_usercopy+0x1c1/0x250 [ 119.779965] kmem_cache_create+0x18/0x20 [ 119.783894] dm_bufio_client_create+0x1ae/0x410 [dm_bufio] [ 119.789380] ? dm_block_manager_alloc_callback+0x20/0x20 [dm_persistent_data] [ 119.796509] ? kmem_cache_alloc_trace+0xae/0x1d0 [ 119.801131] dm_block_manager_create+0x5e/0x90 [dm_persistent_data] [ 119.807397] __create_persistent_data_objects+0x38/0x940 [dm_thin_pool] [ 119.814008] dm_pool_abort_metadata+0x64/0x90 [dm_thin_pool] [ 119.819669] metadata_operation_failed+0x59/0x100 [dm_thin_pool] [ 119.825673] alloc_data_block.isra.53+0x86/0x180 [dm_thin_pool] [ 119.831592] process_cell+0x2a3/0x550 [dm_thin_pool] [ 119.836558] ? mempool_alloc+0x6f/0x180 [ 119.840400] ? u32_swap+0x10/0x10 [ 119.843717] ? sort+0x17b/0x270 [ 119.846863] ? u32_swap+0x10/0x10 [ 119.850181] do_worker+0x28d/0x8f0 [dm_thin_pool] [ 119.854890] ? move_linked_works+0x6f/0xa0 [ 119.858989] process_one_work+0x171/0x370 [ 119.862999] worker_thread+0x49/0x3f0 [ 119.866669] kthread+0xf8/0x130 [ 119.869813] ? max_active_store+0x80/0x80 [ 119.873827] ? kthread_bind+0x10/0x10 [ 119.877493] ret_from_fork+0x35/0x40 [ 119.881076] kobject_add_internal failed for :a-0000144 with -EEXIST, don't try to register things with the same name in the same directory. [ 119.893580] kmem_cache_create(dm_bufio_buffer-16) failed with error -17 Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1806151817130.6333@file01.intranet… Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Reported-by: Mike Snitzer <snitzer(a)redhat.com> Tested-by: Mike Snitzer <snitzer(a)redhat.com> Cc: Christoph Lameter <cl(a)linux.com> Cc: Pekka Enberg <penberg(a)kernel.org> Cc: David Rientjes <rientjes(a)google.com> Cc: Joonsoo Kim <iamjoonsoo.kim(a)lge.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- diff -puN include/linux/slub_def.h~slub-fix-failure-when-we-delete-and-create-a-slab-cache include/linux/slub_def.h --- a/include/linux/slub_def.h~slub-fix-failure-when-we-delete-and-create-a-slab-cache +++ a/include/linux/slub_def.h @@ -155,8 +155,12 @@ struct kmem_cache { #ifdef CONFIG_SYSFS #define SLAB_SUPPORTS_SYSFS +void sysfs_slab_unlink(struct kmem_cache *); void sysfs_slab_release(struct kmem_cache *); #else +static inline void sysfs_slab_unlink(struct kmem_cache *s) +{ +} static inline void sysfs_slab_release(struct kmem_cache *s) { } diff -puN mm/slab_common.c~slub-fix-failure-when-we-delete-and-create-a-slab-cache mm/slab_common.c --- a/mm/slab_common.c~slub-fix-failure-when-we-delete-and-create-a-slab-cache +++ a/mm/slab_common.c @@ -567,10 +567,14 @@ static int shutdown_cache(struct kmem_ca list_del(&s->list); if (s->flags & SLAB_TYPESAFE_BY_RCU) { +#ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); +#endif list_add_tail(&s->list, &slab_caches_to_rcu_destroy); schedule_work(&slab_caches_to_rcu_destroy_work); } else { #ifdef SLAB_SUPPORTS_SYSFS + sysfs_slab_unlink(s); sysfs_slab_release(s); #else slab_kmem_cache_release(s); diff -puN mm/slub.c~slub-fix-failure-when-we-delete-and-create-a-slab-cache mm/slub.c --- a/mm/slub.c~slub-fix-failure-when-we-delete-and-create-a-slab-cache +++ a/mm/slub.c @@ -5667,7 +5667,6 @@ static void sysfs_slab_remove_workfn(str kset_unregister(s->memcg_kset); #endif kobject_uevent(&s->kobj, KOBJ_REMOVE); - kobject_del(&s->kobj); out: kobject_put(&s->kobj); } @@ -5752,6 +5751,12 @@ static void sysfs_slab_remove(struct kme schedule_work(&s->kobj_remove_work); } +void sysfs_slab_unlink(struct kmem_cache *s) +{ + if (slab_state >= FULL) + kobject_del(&s->kobj); +} + void sysfs_slab_release(struct kmem_cache *s) { if (slab_state >= FULL) _ Patches currently in -mm which might be from mpatocka(a)redhat.com are

7 years

1
0
0 0

[PATCH] IB/srpt: Support HCAs with more than two ports

by Bart Van Assche

Since there are adapters that have four ports, increase the size of the srpt_device.port[] array. This patch avoids that the following warning is hit with quad port Chelsio adapters: WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port)); Reported-by: Steve Wise <swise(a)opengridcomputing.com> Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Steve Wise <swise(a)opengridcomputing.com> Cc: Christoph Hellwig <hch(a)infradead.org> Cc: <stable(a)vger.kernel.org> --- drivers/infiniband/ulp/srpt/ib_srpt.c | 6 +++--- drivers/infiniband/ulp/srpt/ib_srpt.h | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 3081c629a7f7..50f4f9806ac6 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -2969,10 +2969,12 @@ static void srpt_add_one(struct ib_device *device) pr_debug("device = %p\n", device); - sdev = kzalloc(sizeof(*sdev), GFP_KERNEL); + sdev = kzalloc(sizeof(*sdev) + device->phys_port_cnt * + sizeof(*sdev->port), GFP_KERNEL); if (!sdev) goto err; + sdev->port = (void *)(sdev + 1); sdev->device = device; mutex_init(&sdev->sdev_mutex); @@ -3023,8 +3025,6 @@ static void srpt_add_one(struct ib_device *device) srpt_event_handler); ib_register_event_handler(&sdev->event_handler); - WARN_ON(sdev->device->phys_port_cnt > ARRAY_SIZE(sdev->port)); - for (i = 1; i <= sdev->device->phys_port_cnt; i++) { sport = &sdev->port[i - 1]; INIT_LIST_HEAD(&sport->nexus_list); diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.h b/drivers/infiniband/ulp/srpt/ib_srpt.h index 2361483476a0..b20ad6dbf966 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.h +++ b/drivers/infiniband/ulp/srpt/ib_srpt.h @@ -410,7 +410,7 @@ struct srpt_device { struct mutex sdev_mutex; bool use_srq; struct srpt_recv_ioctx **ioctx_ring; - struct srpt_port port[2]; + struct srpt_port *port; struct ib_event_handler event_handler; struct list_head list; }; -- 2.17.1

7 years

3
5
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror