- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "PM / OPP: Move error message to debug level" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PM / OPP: Move error message to debug level to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pm-opp-move-error-message-to-debug-level.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Fabio Estevam <fabio.estevam(a)nxp.com> Date: Fri, 29 Sep 2017 14:39:49 -0300 Subject: PM / OPP: Move error message to debug level From: Fabio Estevam <fabio.estevam(a)nxp.com> [ Upstream commit 035ed07208dc501d023873447113f3f178592156 ] On some i.MX6 platforms which do not have speed grading check, opp table will not be created in platform code, so cpufreq driver prints the following error message: cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19) However, this is not really an error in this case because the imx6q-cpufreq driver first calls dev_pm_opp_get_opp_count() and if it fails, it means that platform code does not provide OPP and then dev_pm_opp_of_add_table() will be called. In order to avoid such confusing error message, move it to debug level. It is up to the caller of dev_pm_opp_get_opp_count() to check its return value and decide if it will print an error or not. Signed-off-by: Fabio Estevam <fabio.estevam(a)nxp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/base/power/opp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -296,7 +296,7 @@ int dev_pm_opp_get_opp_count(struct devi opp_table = _find_opp_table(dev); if (IS_ERR(opp_table)) { count = PTR_ERR(opp_table); - dev_err(dev, "%s: OPP table not found (%d)\n", + dev_dbg(dev, "%s: OPP table not found (%d)\n", __func__, count); return count; } Patches currently in stable-queue which might be from fabio.estevam(a)nxp.com are queue-4.14/pm-opp-move-error-message-to-debug-level.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: Create SR-IOV virtfn/physfn links before attaching driver" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: Create SR-IOV virtfn/physfn links before attaching driver to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-create-sr-iov-virtfn-physfn-links-before-attaching-driver.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Stuart Hayes <stuart.w.hayes(a)gmail.com> Date: Wed, 4 Oct 2017 10:57:52 -0500 Subject: PCI: Create SR-IOV virtfn/physfn links before attaching driver From: Stuart Hayes <stuart.w.hayes(a)gmail.com> [ Upstream commit 27d6162944b9b34c32cd5841acd21786637ee743 ] When creating virtual functions, create the "virtfn%u" and "physfn" links in sysfs *before* attaching the driver instead of after. When we attach the driver to the new virtual network interface first, there is a race when the driver attaches to the new sends out an "add" udev event, and the network interface naming software (biosdevname or systemd, for example) tries to look at these links. Signed-off-by: Stuart Hayes <stuart.w.hayes(a)gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/iov.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -162,7 +162,6 @@ int pci_iov_add_virtfn(struct pci_dev *d pci_device_add(virtfn, virtfn->bus); - pci_bus_add_device(virtfn); sprintf(buf, "virtfn%u", id); rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf); if (rc) @@ -173,6 +172,8 @@ int pci_iov_add_virtfn(struct pci_dev *d kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE); + pci_bus_add_device(virtfn); + return 0; failed2: Patches currently in stable-queue which might be from stuart.w.hayes(a)gmail.com are queue-4.14/pci-create-sr-iov-virtfn-physfn-links-before-attaching-driver.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: Avoid bus reset if bridge itself is broken" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: Avoid bus reset if bridge itself is broken to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-avoid-bus-reset-if-bridge-itself-is-broken.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: David Daney <david.daney(a)cavium.com> Date: Fri, 8 Sep 2017 10:10:31 +0200 Subject: PCI: Avoid bus reset if bridge itself is broken From: David Daney <david.daney(a)cavium.com> [ Upstream commit 357027786f3523d26f42391aa4c075b8495e5d28 ] When checking to see if a PCI bus can safely be reset, we previously checked to see if any of the children had their PCI_DEV_FLAGS_NO_BUS_RESET flag set. Children marked with that flag are known not to behave well after a bus reset. Some PCIe root port bridges also do not behave well after a bus reset, sometimes causing the devices behind the bridge to become unusable. Add a check for PCI_DEV_FLAGS_NO_BUS_RESET being set in the bridge device to allow these bridges to be flagged, and prevent their secondary buses from being reset. Signed-off-by: David Daney <david.daney(a)cavium.com> [jglauber(a)cavium.com: fixed typo] Signed-off-by: Jan Glauber <jglauber(a)cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Reviewed-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/pci.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4356,6 +4356,10 @@ static bool pci_bus_resetable(struct pci { struct pci_dev *dev; + + if (bus->self && (bus->self->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)) + return false; + list_for_each_entry(dev, &bus->devices, bus_list) { if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET || (dev->subordinate && !pci_bus_resetable(dev->subordinate))) Patches currently in stable-queue which might be from david.daney(a)cavium.com are queue-4.14/pci-avoid-bus-reset-if-bridge-itself-is-broken.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI/AER: Report non-fatal errors only to the affected endpoint" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI/AER: Report non-fatal errors only to the affected endpoint to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-aer-report-non-fatal-errors-only-to-the-affected-endpoint.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Gabriele Paoloni <gabriele.paoloni(a)huawei.com> Date: Thu, 28 Sep 2017 15:33:05 +0100 Subject: PCI/AER: Report non-fatal errors only to the affected endpoint From: Gabriele Paoloni <gabriele.paoloni(a)huawei.com> [ Upstream commit 86acc790717fb60fb51ea3095084e331d8711c74 ] Previously, if an non-fatal error was reported by an endpoint, we called report_error_detected() for the endpoint, every sibling on the bus, and their descendents. If any of them did not implement the .error_detected() method, do_recovery() failed, leaving all these devices unrecovered. For example, the system described in the bugzilla below has two devices: 0000:74:02.0 [19e5:a230] SAS controller, driver has .error_detected() 0000:74:03.0 [19e5:a235] SATA controller, driver lacks .error_detected() When a device such as 74:02.0 reported a non-fatal error, do_recovery() failed because 74:03.0 lacked an .error_detected() method. But per PCIe r3.1, sec 6.2.2.2.2, such an error does not compromise the Link and does not affect 74:03.0: Non-fatal errors are uncorrectable errors which cause a particular transaction to be unreliable but the Link is otherwise fully functional. Isolating Non-fatal from Fatal errors provides Requester/Receiver logic in a device or system management software the opportunity to recover from the error without resetting the components on the Link and disturbing other transactions in progress. Devices not associated with the transaction in error are not impacted by the error. Report non-fatal errors only to the endpoint that reported them. We really want to check for AER_NONFATAL here, but the current code structure doesn't allow that. Looking for pci_channel_io_normal is the best we can do now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197055 Fixes: 6c2b374d7485 ("PCI-Express AER implemetation: AER core and aerdriver") Signed-off-by: Gabriele Paoloni <gabriele.paoloni(a)huawei.com> Signed-off-by: Dongdong Liu <liudongdong3(a)huawei.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/pcie/aer/aerdrv_core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -390,7 +390,14 @@ static pci_ers_result_t broadcast_error_ * If the error is reported by an end point, we think this * error is related to the upstream link of the end point. */ - pci_walk_bus(dev->bus, cb, &result_data); + if (state == pci_channel_io_normal) + /* + * the error is non fatal so the bus is ok, just invoke + * the callback for the function that logged the error. + */ + cb(dev, &result_data); + else + pci_walk_bus(dev->bus, cb, &result_data); } return result_data.result; Patches currently in stable-queue which might be from gabriele.paoloni(a)huawei.com are queue-4.14/pci-aer-report-non-fatal-errors-only-to-the-affected-endpoint.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "optee: fix invalid of_node_put() in optee_driver_init()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled optee: fix invalid of_node_put() in optee_driver_init() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: optee-fix-invalid-of_node_put-in-optee_driver_init.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From f044113113dd95ba73916bde10e804d3cdfa2662 Mon Sep 17 00:00:00 2001 From: Jens Wiklander <jens.wiklander(a)linaro.org> Date: Mon, 9 Oct 2017 11:11:49 +0200 Subject: optee: fix invalid of_node_put() in optee_driver_init() From: Jens Wiklander <jens.wiklander(a)linaro.org> commit f044113113dd95ba73916bde10e804d3cdfa2662 upstream. The first node supplied to of_find_matching_node() has its reference counter decreased as part of call to that function. In optee_driver_init() after calling of_find_matching_node() it's invalid to call of_node_put() on the supplied node again. So remove the invalid call to of_node_put(). Reported-by: Alex Shi <alex.shi(a)linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander(a)linaro.org> Cc: <andi(a)linux-stable.l.notmuch.email> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tee/optee/core.c | 1 - 1 file changed, 1 deletion(-) --- a/drivers/tee/optee/core.c +++ b/drivers/tee/optee/core.c @@ -590,7 +590,6 @@ static int __init optee_driver_init(void return -ENODEV; np = of_find_matching_node(fw_np, optee_match); - of_node_put(fw_np); if (!np) return -ENODEV; Patches currently in stable-queue which might be from jens.wiklander(a)linaro.org are queue-4.14/optee-fix-invalid-of_node_put-in-optee_driver_init.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "net: ipv6: send NS for DAD when link operationally up" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ipv6: send NS for DAD when link operationally up to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ipv6-send-ns-for-dad-when-link-operationally-up.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Mike Manning <mmanning(a)brocade.com> Date: Mon, 25 Sep 2017 22:01:36 +0100 Subject: net: ipv6: send NS for DAD when link operationally up From: Mike Manning <mmanning(a)brocade.com> [ Upstream commit 1f372c7bfb23286d2bf4ce0423ab488e86b74bb2 ] The NS for DAD are sent on admin up as long as a valid qdisc is found. A race condition exists by which these packets will not egress the interface if the operational state of the lower device is not yet up. The solution is to delay DAD until the link is operationally up according to RFC2863. Rather than only doing this, follow the existing code checks by deferring IPv6 device initialization altogether. The fix allows DAD on devices like tunnels that are controlled by userspace control plane. The fix has no impact on regular deployments, but means that there is no IPv6 connectivity until the port has been opened in the case of port-based network access control, which should be desirable. Signed-off-by: Mike Manning <mmanning(a)brocade.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/addrconf.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -303,10 +303,10 @@ static struct ipv6_devconf ipv6_devconf_ .disable_policy = 0, }; -/* Check if a valid qdisc is available */ -static inline bool addrconf_qdisc_ok(const struct net_device *dev) +/* Check if link is ready: is it up and is a valid qdisc available */ +static inline bool addrconf_link_ready(const struct net_device *dev) { - return !qdisc_tx_is_noop(dev); + return netif_oper_up(dev) && !qdisc_tx_is_noop(dev); } static void addrconf_del_rs_timer(struct inet6_dev *idev) @@ -451,7 +451,7 @@ static struct inet6_dev *ipv6_add_dev(st ndev->token = in6addr_any; - if (netif_running(dev) && addrconf_qdisc_ok(dev)) + if (netif_running(dev) && addrconf_link_ready(dev)) ndev->if_flags |= IF_READY; ipv6_mc_init_dev(ndev); @@ -3404,7 +3404,7 @@ static int addrconf_notify(struct notifi /* restore routes for permanent addresses */ addrconf_permanent_addr(dev); - if (!addrconf_qdisc_ok(dev)) { + if (!addrconf_link_ready(dev)) { /* device is not ready yet. */ pr_info("ADDRCONF(NETDEV_UP): %s: link is not ready\n", dev->name); @@ -3419,7 +3419,7 @@ static int addrconf_notify(struct notifi run_pending = 1; } } else if (event == NETDEV_CHANGE) { - if (!addrconf_qdisc_ok(dev)) { + if (!addrconf_link_ready(dev)) { /* device is still not ready. */ break; } Patches currently in stable-queue which might be from mmanning(a)brocade.com are queue-4.14/net-ipv6-send-ns-for-dad-when-link-operationally-up.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "net: phy: at803x: Change error to EINVAL for invalid MAC" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: phy: at803x: Change error to EINVAL for invalid MAC to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-phy-at803x-change-error-to-einval-for-invalid-mac.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Dan Murphy <dmurphy(a)ti.com> Date: Tue, 10 Oct 2017 12:42:56 -0500 Subject: net: phy: at803x: Change error to EINVAL for invalid MAC From: Dan Murphy <dmurphy(a)ti.com> [ Upstream commit fc7556877d1748ac00958822a0a3bba1d4bd9e0d ] Change the return error code to EINVAL if the MAC address is not valid in the set_wol function. Signed-off-by: Dan Murphy <dmurphy(a)ti.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/phy/at803x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -167,7 +167,7 @@ static int at803x_set_wol(struct phy_dev mac = (const u8 *) ndev->dev_addr; if (!is_valid_ether_addr(mac)) - return -EFAULT; + return -EINVAL; for (i = 0; i < 3; i++) { phy_write(phydev, AT803X_MMD_ACCESS_CONTROL, Patches currently in stable-queue which might be from dmurphy(a)ti.com are queue-4.14/net-phy-at803x-change-error-to-einval-for-invalid-mac.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "md: always set THREAD_WAKEUP and wake up wqueue if thread existed" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled md: always set THREAD_WAKEUP and wake up wqueue if thread existed to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: md-always-set-thread_wakeup-and-wake-up-wqueue-if-thread-existed.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Guoqing Jiang <gqjiang(a)suse.com> Date: Mon, 9 Oct 2017 10:32:48 +0800 Subject: md: always set THREAD_WAKEUP and wake up wqueue if thread existed From: Guoqing Jiang <gqjiang(a)suse.com> [ Upstream commit d1d90147c9680aaec4a5757932c2103c42c9c23b ] Since commit 4ad23a976413 ("MD: use per-cpu counter for writes_pending"), the wait_queue is only got invoked if THREAD_WAKEUP is not set previously. With above change, I can see process_metadata_update could always hang on the wait queue, because mddev->thread could stay on 'D' status and the THREAD_WAKEUP flag is not cleared since there are lots of place to wake up mddev->thread. Then deadlock happened as follows: linux175:~ # ps aux|grep md|grep D root 20117 0.0 0.0 0 0 ? D 03:45 0:00 [md0_raid1] root 20125 0.0 0.0 0 0 ? D 03:45 0:00 [md0_cluster_rec] linux175:~ # cat /proc/20117/stack [<ffffffffa0635604>] dlm_lock_sync+0x94/0xd0 [md_cluster] [<ffffffffa0635674>] lock_token+0x34/0xd0 [md_cluster] [<ffffffffa0635804>] metadata_update_start+0x64/0x110 [md_cluster] [<ffffffffa04d985b>] md_update_sb.part.58+0x9b/0x860 [md_mod] [<ffffffffa04da035>] md_update_sb+0x15/0x30 [md_mod] [<ffffffffa04dc066>] md_check_recovery+0x266/0x490 [md_mod] [<ffffffffa06450e2>] raid1d+0x42/0x810 [raid1] [<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod] [<ffffffff81091741>] kthread+0x101/0x140 linux175:~ # cat /proc/20125/stack [<ffffffffa0636679>] recv_daemon+0x3f9/0x5c0 [md_cluster] [<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod] [<ffffffff81091741>] kthread+0x101/0x140 So let's revert the part of code in the commit to resovle the problem since we can't get lots of benefits of previous change. Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Signed-off-by: Guoqing Jiang <gqjiang(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7468,8 +7468,8 @@ void md_wakeup_thread(struct md_thread * { if (thread) { pr_debug("md: waking up MD thread %s.\n", thread->tsk->comm); - if (!test_and_set_bit(THREAD_WAKEUP, &thread->flags)) - wake_up(&thread->wqueue); + set_bit(THREAD_WAKEUP, &thread->flags); + wake_up(&thread->wqueue); } } EXPORT_SYMBOL(md_wakeup_thread); Patches currently in stable-queue which might be from gqjiang(a)suse.com are queue-4.14/md-always-set-thread_wakeup-and-wake-up-wqueue-if-thread-existed.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "leds: pca955x: Don't invert requested value in pca955x_gpio_set_value()" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: leds-pca955x-don-t-invert-requested-value-in-pca955x_gpio_set_value.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Andrew Jeffery <andrew(a)aj.id.au> Date: Fri, 1 Sep 2017 15:08:58 +0930 Subject: leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() From: Andrew Jeffery <andrew(a)aj.id.au> [ Upstream commit 52ca7d0f7bdad832b291ed979146443533ee79c0 ] The PCA9552 lines can be used either for driving LEDs or as GPIOs. The manual states that for LEDs, the operation is open-drain: The LSn LED select registers determine the source of the LED data. 00 = output is set LOW (LED on) 01 = output is set high-impedance (LED off; default) 10 = output blinks at PWM0 rate 11 = output blinks at PWM1 rate For GPIOs it suggests a pull-up so that the open-case drives the line high: For use as output, connect external pull-up resistor to the pin and size it according to the DC recommended operating characteristics. LED output pin is HIGH when the output is programmed as high-impedance, and LOW when the output is programmed LOW through the ‘LED selector’ register. The output can be pulse-width controlled when PWM0 or PWM1 are used. Now, I have a hardware design that uses the LED controller to control LEDs. However, for $reasons, we're using the leds-gpio driver to drive the them. The reasons are here are a tangent but lead to the discovery of the inversion, which manifested as the LEDs being set to full brightness at boot when we expected them to be off. As we're driving the LEDs through leds-gpio, this means wending our way through the gpiochip abstractions. So with that in mind we need to describe an active-low GPIO configuration to drive the LEDs as though they were GPIOs. The set() gpiochip callback in leds-pca955x does the following: ... if (val) pca955x_led_set(&led->led_cdev, LED_FULL); else pca955x_led_set(&led->led_cdev, LED_OFF); ... Where LED_FULL = 255. pca955x_led_set() in turn does: ... switch (value) { case LED_FULL: ls = pca955x_ledsel(ls, ls_led, PCA955X_LS_LED_ON); break; ... Where PCA955X_LS_LED_ON is defined as: #define PCA955X_LS_LED_ON 0x0 /* Output LOW */ So here we have some type confusion: We've crossed domains from GPIO behaviour to LED behaviour without accounting for possible inversions in the process. Stepping back to leds-gpio for a moment, during probe() we call create_gpio_led(), which eventually executes: if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { state = gpiod_get_value_cansleep(led_dat->gpiod); if (state < 0) return state; } else { state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); } ... ret = gpiod_direction_output(led_dat->gpiod, state); In the devicetree the GPIO is annotated as active-low, and gpiod_get_value_cansleep() handles this for us: int gpiod_get_value_cansleep(const struct gpio_desc *desc) { int value; might_sleep_if(extra_checks); VALIDATE_DESC(desc); value = _gpiod_get_raw_value(desc); if (value < 0) return value; if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; return value; } _gpiod_get_raw_value() in turn calls through the get() callback for the gpiochip implementation, so returning to our get() implementation in leds-pca955x we find we extract the raw value from hardware: static int pca955x_gpio_get_value(struct gpio_chip *gc, unsigned int offset) { struct pca955x *pca955x = gpiochip_get_data(gc); struct pca955x_led *led = &pca955x->leds[offset]; u8 reg = pca955x_read_input(pca955x->client, led->led_num / 8); return !!(reg & (1 << (led->led_num % 8))); } This behaviour is not symmetric with that of set(), where the val is inverted by the driver. Closing the loop on the GPIO_ACTIVE_LOW inversions, gpiod_direction_output(), like gpiod_get_value_cansleep(), handles it for us: int gpiod_direction_output(struct gpio_desc *desc, int value) { VALIDATE_DESC(desc); if (test_bit(FLAG_ACTIVE_LOW, &desc->flags)) value = !value; else value = !!value; return _gpiod_direction_output_raw(desc, value); } All-in-all, with a value of 'keep' for default-state property in a leds-gpio child node, the current state of the hardware will in-fact be inverted; precisely the opposite of what was intended. Rework leds-pca955x so that we avoid the incorrect inversion and clarify the semantics with respect to GPIO. Signed-off-by: Andrew Jeffery <andrew(a)aj.id.au> Reviewed-by: Cédric Le Goater <clg(a)kaod.org> Tested-by: Joel Stanley <joel(a)jms.id.au> Tested-by: Matt Spinler <mspinler(a)linux.vnet.ibm.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/leds/leds-pca955x.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) --- a/drivers/leds/leds-pca955x.c +++ b/drivers/leds/leds-pca955x.c @@ -61,6 +61,10 @@ #define PCA955X_LS_BLINK0 0x2 /* Blink at PWM0 rate */ #define PCA955X_LS_BLINK1 0x3 /* Blink at PWM1 rate */ +#define PCA955X_GPIO_INPUT LED_OFF +#define PCA955X_GPIO_HIGH LED_OFF +#define PCA955X_GPIO_LOW LED_FULL + enum pca955x_type { pca9550, pca9551, @@ -329,9 +333,9 @@ static int pca955x_set_value(struct gpio struct pca955x_led *led = &pca955x->leds[offset]; if (val) - return pca955x_led_set(&led->led_cdev, LED_FULL); - else - return pca955x_led_set(&led->led_cdev, LED_OFF); + return pca955x_led_set(&led->led_cdev, PCA955X_GPIO_HIGH); + + return pca955x_led_set(&led->led_cdev, PCA955X_GPIO_LOW); } static void pca955x_gpio_set_value(struct gpio_chip *gc, unsigned int offset, @@ -355,8 +359,11 @@ static int pca955x_gpio_get_value(struct static int pca955x_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) { - /* To use as input ensure pin is not driven */ - return pca955x_set_value(gc, offset, 0); + struct pca955x *pca955x = gpiochip_get_data(gc); + struct pca955x_led *led = &pca955x->leds[offset]; + + /* To use as input ensure pin is not driven. */ + return pca955x_led_set(&led->led_cdev, PCA955X_GPIO_INPUT); } static int pca955x_gpio_direction_output(struct gpio_chip *gc, Patches currently in stable-queue which might be from andrew(a)aj.id.au are queue-4.14/leds-pca955x-don-t-invert-requested-value-in-pca955x_gpio_set_value.patch

6 years, 9 months

1
0
0 0

[Linux-stable-mirror] Patch "kvm, mm: account kvm related kmem slabs to kmemcg" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled kvm, mm: account kvm related kmem slabs to kmemcg to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-mm-account-kvm-related-kmem-slabs-to-kmemcg.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Wed Dec 20 18:17:52 CET 2017 From: Shakeel Butt <shakeelb(a)google.com> Date: Thu, 5 Oct 2017 18:07:24 -0700 Subject: kvm, mm: account kvm related kmem slabs to kmemcg From: Shakeel Butt <shakeelb(a)google.com> [ Upstream commit 46bea48ac241fe0b413805952dda74dd0c09ba8b ] The kvm slabs can consume a significant amount of system memory and indeed in our production environment we have observed that a lot of machines are spending significant amount of memory that can not be left as system memory overhead. Also the allocations from these slabs can be triggered directly by user space applications which has access to kvm and thus a buggy application can leak such memory. So, these caches should be accounted to kmemcg. Signed-off-by: Shakeel Butt <shakeelb(a)google.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/mmu.c | 4 ++-- virt/kvm/kvm_main.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -5476,13 +5476,13 @@ int kvm_mmu_module_init(void) pte_list_desc_cache = kmem_cache_create("pte_list_desc", sizeof(struct pte_list_desc), - 0, 0, NULL); + 0, SLAB_ACCOUNT, NULL); if (!pte_list_desc_cache) goto nomem; mmu_page_header_cache = kmem_cache_create("kvm_mmu_page_header", sizeof(struct kvm_mmu_page), - 0, 0, NULL); + 0, SLAB_ACCOUNT, NULL); if (!mmu_page_header_cache) goto nomem; --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -4018,7 +4018,7 @@ int kvm_init(void *opaque, unsigned vcpu if (!vcpu_align) vcpu_align = __alignof__(struct kvm_vcpu); kvm_vcpu_cache = kmem_cache_create("kvm_vcpu", vcpu_size, vcpu_align, - 0, NULL); + SLAB_ACCOUNT, NULL); if (!kvm_vcpu_cache) { r = -ENOMEM; goto out_free_3; Patches currently in stable-queue which might be from shakeelb(a)google.com are queue-4.14/kvm-mm-account-kvm-related-kmem-slabs-to-kmemcg.patch

6 years, 9 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror