- Linux-stable-mirror - lists.linaro.org

[PATCH 6.12.y 0/2] Fix rtnetlink.sh kselftest failures in stable

by Harshit Mogalapalli

This is reproducible on on stable kernels after the backport of commit: 2cf567f421db ("netdevsim: copy addresses for both in and out paths") to stable kernels. Using a single cover letter for all stable kernels but will send separate patches for each stable kernel Which kselftests are particularly failing: 2c2 < sa[0] tx ipaddr=0x00000000 00000000 00000000 047ba8c0 --- > sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000 FAIL: ipsec_offload incorrect driver data FAIL: ipsec_offload 813 # does driver have correct offload info 814 diff $sysfsf - << EOF 815 SA count=2 tx=3 816 sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000 817 sa[0] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 818 sa[0] key=0x34333231 38373635 32313039 36353433 819 sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0 820 sa[1] spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1 821 sa[1] key=0x34333231 38373635 32313039 36353433 822 EOF 823 if [ $? -ne 0 ] ; then 824 echo "FAIL: ipsec_offload incorrect driver data" 825 check_err 1 826 fi 827 This part of check throws errors and the rtnetlink.sh fails on ipsec_offload. Reason is that the after the below patch: commit 2cf567f421dbfe7e53b7e5ddee9400da10efb75d Author: Hangbin Liu <liuhangbin(a)gmail.com> Date: Thu Oct 10 04:00:26 2024 +0000 netdevsim: copy addresses for both in and out paths [ Upstream commit 2cf567f421dbfe7e53b7e5ddee9400da10efb75d ] The current code only copies the address for the in path, leaving the out path address set to 0. This patch corrects the issue by copying the addresses for both the in and out paths. Before this patch: # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=2 tx=20 sa[0] tx ipaddr=0.0.0.0 sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] rx ipaddr=192.168.0.1 sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 After this patch: = cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=2 tx=20 sa[0] tx ipaddr=192.168.0.2 sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] rx ipaddr=192.168.0.1 sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 Fixes: 7699353da875 ("netdevsim: add ipsec offload testing") tx ip address is not 0.0.0.0 anymore, it is was 0.0.0.0 before above patch. So this commit: 3ec920bb978c ("selftests: rtnetlink: update netdevsim ipsec output format") which is not backported to stable kernels tries to address rtneltlink.sh fixing. fixes the change in handling tx ip address as well, so far so good! but when I apply this script fix it doesn't pass yet: 2c2 < sa[0] tx ipaddr=0x00000000 00000000 00000000 047ba8c0 --- > sa[0] tx ipaddr=192.168.123.4 5c5 < sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0 --- > sa[1] rx ipaddr=192.168.123.3 FAIL: ipsec_offload incorrect driver data So it clearly suggest that addresses are not properly handled, IPSec addresses are printed in hexadecimal format, but the script expects it in more readable format, that hinted me whats missing, and that commit is: commit c71bc6da6198a6d88df86094f1052bb581951d65 Author: Hangbin Liu <liuhangbin(a)gmail.com> Date: Thu Oct 10 04:00:25 2024 +0000 netdevsim: print human readable IP address Currently, IPSec addresses are printed in hexadecimal format, which is not user-friendly. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=2 tx=20 sa[0] rx ipaddr=0x00000000 00000000 00000000 0100a8c0 sa[0] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] tx ipaddr=0x00000000 00000000 00000000 00000000 sa[1] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 This patch updates the code to print the IPSec address in a human-readable format for easier debug. e.g. # cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec SA count=4 tx=40 sa[0] tx ipaddr=0.0.0.0 sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[0] key=0x3167608a ca4f1397 43565909 941fa627 sa[1] rx ipaddr=192.168.0.1 sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[1] key=0x3167608a ca4f1397 43565909 941fa627 sa[2] tx ipaddr=:: sa[2] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1 sa[2] key=0x3167608a ca4f1397 43565909 941fa627 sa[3] rx ipaddr=2000::1 sa[3] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1 sa[3] key=0x3167608a ca4f1397 43565909 941fa627 Solution: ======== Backport both the commits commit: c71bc6da6198 ("netdevsim: print human readable IP address") and script fixup commit: 3ec920bb978c ("selftests: rtnetlink: update netdevsim ipsec output format") to all stable kernels which have commit: 2cf567f421db ("netdevsim: copy addresses for both in and out paths") in them. Another clue to say this is right way to do this is that these above three patches did go as patchset into net/ [1]. I am sending patches for all stable trees differently, however I am using same cover letter. Tested all stable kernels after patching. This failure is no more reproducible. Thanks, Harshit [1] https://lore.kernel.org/all/172868703973.3018281.2970275743967117794.git-pa… Hangbin Liu (2): netdevsim: print human readable IP address selftests: rtnetlink: update netdevsim ipsec output format drivers/net/netdevsim/ipsec.c | 12 ++++++++---- tools/testing/selftests/net/rtnetlink.sh | 4 ++-- 2 files changed, 10 insertions(+), 6 deletions(-) -- 2.46.0

9 months

2
4
0 0

[PATCH v6.12] wifi: rtw89: pci: disable PCIE wake bit when PCIE deinit

by Zenm Chen

From: Ping-Ke Shih <pkshih(a)realtek.com> [ Upstream commit 9c1df813e08832c3836c254bc8a2f83ff22dbc06 ] The PCIE wake bit is to control PCIE wake signal to host. When PCIE is going down, clear this bit to prevent waking up host unexpectedly. Signed-off-by: Ping-Ke Shih <pkshih(a)realtek.com> Link: https://patch.msgid.link/20241111063835.15454-1-pkshih@realtek.com Signed-off-by: Zenm Chen <zenmchen(a)gmail.com> --- Some users of RTL8852BE chip may encounter a shutdown issue [1] and this upstream patch fixes it, so backport it to kernel 6.12. [1] https://github.com/lwfinger/rtw89/issues/372 --- drivers/net/wireless/realtek/rtw89/pci.c | 17 ++++++++++++++--- drivers/net/wireless/realtek/rtw89/pci.h | 11 +++++++++++ drivers/net/wireless/realtek/rtw89/pci_be.c | 2 ++ 3 files changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c index 5aef7fa37..0ac84f968 100644 --- a/drivers/net/wireless/realtek/rtw89/pci.c +++ b/drivers/net/wireless/realtek/rtw89/pci.c @@ -2492,7 +2492,7 @@ static int rtw89_pci_dphy_delay(struct rtw89_dev *rtwdev) PCIE_DPHY_DLY_25US, PCIE_PHY_GEN1); } -static void rtw89_pci_power_wake(struct rtw89_dev *rtwdev, bool pwr_up) +static void rtw89_pci_power_wake_ax(struct rtw89_dev *rtwdev, bool pwr_up) { if (pwr_up) rtw89_write32_set(rtwdev, R_AX_HCI_OPT_CTRL, BIT_WAKE_CTRL); @@ -2799,6 +2799,8 @@ static int rtw89_pci_ops_deinit(struct rtw89_dev *rtwdev) { const struct rtw89_pci_info *info = rtwdev->pci_info; + rtw89_pci_power_wake(rtwdev, false); + if (rtwdev->chip->chip_id == RTL8852A) { /* ltr sw trigger */ rtw89_write32_set(rtwdev, R_AX_LTR_CTRL_0, B_AX_APP_LTR_IDLE); @@ -2841,7 +2843,7 @@ static int rtw89_pci_ops_mac_pre_init_ax(struct rtw89_dev *rtwdev) return ret; } - rtw89_pci_power_wake(rtwdev, true); + rtw89_pci_power_wake_ax(rtwdev, true); rtw89_pci_autoload_hang(rtwdev); rtw89_pci_l12_vmain(rtwdev); rtw89_pci_gen2_force_ib(rtwdev); @@ -2886,6 +2888,13 @@ static int rtw89_pci_ops_mac_pre_init_ax(struct rtw89_dev *rtwdev) return 0; } +static int rtw89_pci_ops_mac_pre_deinit_ax(struct rtw89_dev *rtwdev) +{ + rtw89_pci_power_wake_ax(rtwdev, false); + + return 0; +} + int rtw89_pci_ltr_set(struct rtw89_dev *rtwdev, bool en) { u32 val; @@ -4264,7 +4273,7 @@ const struct rtw89_pci_gen_def rtw89_pci_gen_ax = { B_AX_RDU_INT}, .mac_pre_init = rtw89_pci_ops_mac_pre_init_ax, - .mac_pre_deinit = NULL, + .mac_pre_deinit = rtw89_pci_ops_mac_pre_deinit_ax, .mac_post_init = rtw89_pci_ops_mac_post_init_ax, .clr_idx_all = rtw89_pci_clr_idx_all_ax, @@ -4280,6 +4289,8 @@ const struct rtw89_pci_gen_def rtw89_pci_gen_ax = { .aspm_set = rtw89_pci_aspm_set_ax, .clkreq_set = rtw89_pci_clkreq_set_ax, .l1ss_set = rtw89_pci_l1ss_set_ax, + + .power_wake = rtw89_pci_power_wake_ax, }; EXPORT_SYMBOL(rtw89_pci_gen_ax); diff --git a/drivers/net/wireless/realtek/rtw89/pci.h b/drivers/net/wireless/realtek/rtw89/pci.h index 48c3ab735..0ea4dcb84 100644 --- a/drivers/net/wireless/realtek/rtw89/pci.h +++ b/drivers/net/wireless/realtek/rtw89/pci.h @@ -1276,6 +1276,8 @@ struct rtw89_pci_gen_def { void (*aspm_set)(struct rtw89_dev *rtwdev, bool enable); void (*clkreq_set)(struct rtw89_dev *rtwdev, bool enable); void (*l1ss_set)(struct rtw89_dev *rtwdev, bool enable); + + void (*power_wake)(struct rtw89_dev *rtwdev, bool pwr_up); }; struct rtw89_pci_info { @@ -1766,4 +1768,13 @@ static inline int rtw89_pci_poll_txdma_ch_idle(struct rtw89_dev *rtwdev) return gen_def->poll_txdma_ch_idle(rtwdev); } + +static inline void rtw89_pci_power_wake(struct rtw89_dev *rtwdev, bool pwr_up) +{ + const struct rtw89_pci_info *info = rtwdev->pci_info; + const struct rtw89_pci_gen_def *gen_def = info->gen_def; + + gen_def->power_wake(rtwdev, pwr_up); +} + #endif diff --git a/drivers/net/wireless/realtek/rtw89/pci_be.c b/drivers/net/wireless/realtek/rtw89/pci_be.c index 7cc328222..2f0d9ff25 100644 --- a/drivers/net/wireless/realtek/rtw89/pci_be.c +++ b/drivers/net/wireless/realtek/rtw89/pci_be.c @@ -614,5 +614,7 @@ const struct rtw89_pci_gen_def rtw89_pci_gen_be = { .aspm_set = rtw89_pci_aspm_set_be, .clkreq_set = rtw89_pci_clkreq_set_be, .l1ss_set = rtw89_pci_l1ss_set_be, + + .power_wake = _patch_pcie_power_wake_be, }; EXPORT_SYMBOL(rtw89_pci_gen_be); -- 2.48.1

9 months

2
4
0 0

[PATCH 6.1.y] nfsd: release svc_expkey/svc_export with rcu_work

by lanbincn＠qq.com

From: Yang Erkun <yangerkun(a)huawei.com> commit f8c989a0c89a75d30f899a7cabdc14d72522bb8d upstream. The last reference for `cache_head` can be reduced to zero in `c_show` and `e_show`(using `rcu_read_lock` and `rcu_read_unlock`). Consequently, `svc_export_put` and `expkey_put` will be invoked, leading to two issues: 1. The `svc_export_put` will directly free ex_uuid. However, `e_show`/`c_show` will access `ex_uuid` after `cache_put`, which can trigger a use-after-free issue, shown below. ================================================================== BUG: KASAN: slab-use-after-free in svc_export_show+0x362/0x430 [nfsd] Read of size 1 at addr ff11000010fdc120 by task cat/870 CPU: 1 UID: 0 PID: 870 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_address_description.constprop.0+0x2c/0x3a0 print_report+0xb9/0x280 kasan_report+0xae/0xe0 svc_export_show+0x362/0x430 [nfsd] c_show+0x161/0x390 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 830: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_node_track_caller_noprof+0x1bc/0x400 kmemdup_noprof+0x22/0x50 svc_export_parse+0x8a9/0xb80 [nfsd] cache_do_downcall+0x71/0xa0 [sunrpc] cache_write_procfs+0x8e/0xd0 [sunrpc] proc_reg_write+0xe1/0x140 vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 868: kasan_save_stack+0x20/0x40 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x37/0x50 kfree+0xf3/0x3e0 svc_export_put+0x87/0xb0 [nfsd] cache_purge+0x17f/0x1f0 [sunrpc] nfsd_destroy_serv+0x226/0x2d0 [nfsd] nfsd_svc+0x125/0x1e0 [nfsd] write_threads+0x16a/0x2a0 [nfsd] nfsctl_transaction_write+0x74/0xa0 [nfsd] vfs_write+0x1a5/0x6d0 ksys_write+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e 2. We cannot sleep while using `rcu_read_lock`/`rcu_read_unlock`. However, `svc_export_put`/`expkey_put` will call path_put, which subsequently triggers a sleeping operation due to the following `dput`. ============================= WARNING: suspicious RCU usage 5.10.0-dirty #141 Not tainted ----------------------------- ... Call Trace: dump_stack+0x9a/0xd0 ___might_sleep+0x231/0x240 dput+0x39/0x600 path_put+0x1b/0x30 svc_export_put+0x17/0x80 e_show+0x1c9/0x200 seq_read_iter+0x63f/0x7c0 seq_read+0x226/0x2d0 vfs_read+0x113/0x2c0 ksys_read+0xc9/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Fix these issues by using `rcu_work` to help release `svc_expkey`/`svc_export`. This approach allows for an asynchronous context to invoke `path_put` and also facilitates the freeing of `uuid/exp/key` after an RCU grace period. Fixes: 9ceddd9da134 ("knfsd: Allow lockless lookups of the exports") Signed-off-by: Yang Erkun <yangerkun(a)huawei.com> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> Signed-off-by: Bin Lan <lanbincn(a)qq.com> --- fs/nfsd/export.c | 31 +++++++++++++++++++++++++------ fs/nfsd/export.h | 4 ++-- 2 files changed, 27 insertions(+), 8 deletions(-) diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c index 39228bd7492a..78db46f6cbc6 100644 --- a/fs/nfsd/export.c +++ b/fs/nfsd/export.c @@ -40,15 +40,24 @@ #define EXPKEY_HASHMAX (1 << EXPKEY_HASHBITS) #define EXPKEY_HASHMASK (EXPKEY_HASHMAX -1) -static void expkey_put(struct kref *ref) +static void expkey_put_work(struct work_struct *work) { - struct svc_expkey *key = container_of(ref, struct svc_expkey, h.ref); + struct svc_expkey *key = + container_of(to_rcu_work(work), struct svc_expkey, ek_rcu_work); if (test_bit(CACHE_VALID, &key->h.flags) && !test_bit(CACHE_NEGATIVE, &key->h.flags)) path_put(&key->ek_path); auth_domain_put(key->ek_client); - kfree_rcu(key, ek_rcu); + kfree(key); +} + +static void expkey_put(struct kref *ref) +{ + struct svc_expkey *key = container_of(ref, struct svc_expkey, h.ref); + + INIT_RCU_WORK(&key->ek_rcu_work, expkey_put_work); + queue_rcu_work(system_wq, &key->ek_rcu_work); } static int expkey_upcall(struct cache_detail *cd, struct cache_head *h) @@ -351,16 +360,26 @@ static void export_stats_destroy(struct export_stats *stats) EXP_STATS_COUNTERS_NUM); } -static void svc_export_put(struct kref *ref) +static void svc_export_put_work(struct work_struct *work) { - struct svc_export *exp = container_of(ref, struct svc_export, h.ref); + struct svc_export *exp = + container_of(to_rcu_work(work), struct svc_export, ex_rcu_work); + path_put(&exp->ex_path); auth_domain_put(exp->ex_client); nfsd4_fslocs_free(&exp->ex_fslocs); export_stats_destroy(exp->ex_stats); kfree(exp->ex_stats); kfree(exp->ex_uuid); - kfree_rcu(exp, ex_rcu); + kfree(exp); +} + +static void svc_export_put(struct kref *ref) +{ + struct svc_export *exp = container_of(ref, struct svc_export, h.ref); + + INIT_RCU_WORK(&exp->ex_rcu_work, svc_export_put_work); + queue_rcu_work(system_wq, &exp->ex_rcu_work); } static int svc_export_upcall(struct cache_detail *cd, struct cache_head *h) diff --git a/fs/nfsd/export.h b/fs/nfsd/export.h index f73e23bb24a1..fa545d8dcc36 100644 --- a/fs/nfsd/export.h +++ b/fs/nfsd/export.h @@ -75,7 +75,7 @@ struct svc_export { u32 ex_layout_types; struct nfsd4_deviceid_map *ex_devid_map; struct cache_detail *cd; - struct rcu_head ex_rcu; + struct rcu_work ex_rcu_work; struct export_stats *ex_stats; }; @@ -91,7 +91,7 @@ struct svc_expkey { u32 ek_fsid[6]; struct path ek_path; - struct rcu_head ek_rcu; + struct rcu_work ek_rcu_work; }; #define EX_ISSYNC(exp) (!((exp)->ex_flags & NFSEXP_ASYNC)) -- 2.43.0

9 months

2
1
0 0

[PATCH 6.12.y] wifi: rtw89: pci: disable PCIE wake bit when PCIE deinit

by Zenm Chen

From: Ping-Ke Shih <pkshih(a)realtek.com> [ Upstream commit 9c1df813e08832c3836c254bc8a2f83ff22dbc06 ] The PCIE wake bit is to control PCIE wake signal to host. When PCIE is going down, clear this bit to prevent waking up host unexpectedly. Signed-off-by: Ping-Ke Shih <pkshih(a)realtek.com> Link: https://patch.msgid.link/20241111063835.15454-1-pkshih@realtek.com Signed-off-by: Zenm Chen <zenmchen(a)gmail.com> --- Some users of RTL8852BE chip may encounter a shutdown issue [1] and this upstream patch fixes it, so backport it to kernel 6.12. [1] https://github.com/lwfinger/rtw89/issues/372 --- drivers/net/wireless/realtek/rtw89/pci.c | 17 ++++++++++++++--- drivers/net/wireless/realtek/rtw89/pci.h | 11 +++++++++++ drivers/net/wireless/realtek/rtw89/pci_be.c | 2 ++ 3 files changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c index 5aef7fa37..0ac84f968 100644 --- a/drivers/net/wireless/realtek/rtw89/pci.c +++ b/drivers/net/wireless/realtek/rtw89/pci.c @@ -2492,7 +2492,7 @@ static int rtw89_pci_dphy_delay(struct rtw89_dev *rtwdev) PCIE_DPHY_DLY_25US, PCIE_PHY_GEN1); } -static void rtw89_pci_power_wake(struct rtw89_dev *rtwdev, bool pwr_up) +static void rtw89_pci_power_wake_ax(struct rtw89_dev *rtwdev, bool pwr_up) { if (pwr_up) rtw89_write32_set(rtwdev, R_AX_HCI_OPT_CTRL, BIT_WAKE_CTRL); @@ -2799,6 +2799,8 @@ static int rtw89_pci_ops_deinit(struct rtw89_dev *rtwdev) { const struct rtw89_pci_info *info = rtwdev->pci_info; + rtw89_pci_power_wake(rtwdev, false); + if (rtwdev->chip->chip_id == RTL8852A) { /* ltr sw trigger */ rtw89_write32_set(rtwdev, R_AX_LTR_CTRL_0, B_AX_APP_LTR_IDLE); @@ -2841,7 +2843,7 @@ static int rtw89_pci_ops_mac_pre_init_ax(struct rtw89_dev *rtwdev) return ret; } - rtw89_pci_power_wake(rtwdev, true); + rtw89_pci_power_wake_ax(rtwdev, true); rtw89_pci_autoload_hang(rtwdev); rtw89_pci_l12_vmain(rtwdev); rtw89_pci_gen2_force_ib(rtwdev); @@ -2886,6 +2888,13 @@ static int rtw89_pci_ops_mac_pre_init_ax(struct rtw89_dev *rtwdev) return 0; } +static int rtw89_pci_ops_mac_pre_deinit_ax(struct rtw89_dev *rtwdev) +{ + rtw89_pci_power_wake_ax(rtwdev, false); + + return 0; +} + int rtw89_pci_ltr_set(struct rtw89_dev *rtwdev, bool en) { u32 val; @@ -4264,7 +4273,7 @@ const struct rtw89_pci_gen_def rtw89_pci_gen_ax = { B_AX_RDU_INT}, .mac_pre_init = rtw89_pci_ops_mac_pre_init_ax, - .mac_pre_deinit = NULL, + .mac_pre_deinit = rtw89_pci_ops_mac_pre_deinit_ax, .mac_post_init = rtw89_pci_ops_mac_post_init_ax, .clr_idx_all = rtw89_pci_clr_idx_all_ax, @@ -4280,6 +4289,8 @@ const struct rtw89_pci_gen_def rtw89_pci_gen_ax = { .aspm_set = rtw89_pci_aspm_set_ax, .clkreq_set = rtw89_pci_clkreq_set_ax, .l1ss_set = rtw89_pci_l1ss_set_ax, + + .power_wake = rtw89_pci_power_wake_ax, }; EXPORT_SYMBOL(rtw89_pci_gen_ax); diff --git a/drivers/net/wireless/realtek/rtw89/pci.h b/drivers/net/wireless/realtek/rtw89/pci.h index 48c3ab735..0ea4dcb84 100644 --- a/drivers/net/wireless/realtek/rtw89/pci.h +++ b/drivers/net/wireless/realtek/rtw89/pci.h @@ -1276,6 +1276,8 @@ struct rtw89_pci_gen_def { void (*aspm_set)(struct rtw89_dev *rtwdev, bool enable); void (*clkreq_set)(struct rtw89_dev *rtwdev, bool enable); void (*l1ss_set)(struct rtw89_dev *rtwdev, bool enable); + + void (*power_wake)(struct rtw89_dev *rtwdev, bool pwr_up); }; struct rtw89_pci_info { @@ -1766,4 +1768,13 @@ static inline int rtw89_pci_poll_txdma_ch_idle(struct rtw89_dev *rtwdev) return gen_def->poll_txdma_ch_idle(rtwdev); } + +static inline void rtw89_pci_power_wake(struct rtw89_dev *rtwdev, bool pwr_up) +{ + const struct rtw89_pci_info *info = rtwdev->pci_info; + const struct rtw89_pci_gen_def *gen_def = info->gen_def; + + gen_def->power_wake(rtwdev, pwr_up); +} + #endif diff --git a/drivers/net/wireless/realtek/rtw89/pci_be.c b/drivers/net/wireless/realtek/rtw89/pci_be.c index 7cc328222..2f0d9ff25 100644 --- a/drivers/net/wireless/realtek/rtw89/pci_be.c +++ b/drivers/net/wireless/realtek/rtw89/pci_be.c @@ -614,5 +614,7 @@ const struct rtw89_pci_gen_def rtw89_pci_gen_be = { .aspm_set = rtw89_pci_aspm_set_be, .clkreq_set = rtw89_pci_clkreq_set_be, .l1ss_set = rtw89_pci_l1ss_set_be, + + .power_wake = _patch_pcie_power_wake_be, }; EXPORT_SYMBOL(rtw89_pci_gen_be); -- 2.48.1

9 months

1
0
0 0

[PATCH net] drop_monitor: fix incorrect initialization order

by Gavrilov Ilia

Syzkaller reports the following bug: BUG: spinlock bad magic on CPU#1, syz-executor.0/7995 lock: 0xffff88805303f3e0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 1 PID: 7995 Comm: syz-executor.0 Tainted: G E 5.10.209+ #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x119/0x179 lib/dump_stack.c:118 debug_spin_lock_before kernel/locking/spinlock_debug.c:83 [inline] do_raw_spin_lock+0x1f6/0x270 kernel/locking/spinlock_debug.c:112 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:117 [inline] _raw_spin_lock_irqsave+0x50/0x70 kernel/locking/spinlock.c:159 reset_per_cpu_data+0xe6/0x240 [drop_monitor] net_dm_cmd_trace+0x43d/0x17a0 [drop_monitor] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2497 genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1348 netlink_sendmsg+0x914/0xe00 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:651 [inline] __sock_sendmsg+0x157/0x190 net/socket.c:663 ____sys_sendmsg+0x712/0x870 net/socket.c:2378 ___sys_sendmsg+0xf8/0x170 net/socket.c:2432 __sys_sendmsg+0xea/0x1b0 net/socket.c:2461 do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x62/0xc7 RIP: 0033:0x7f3f9815aee9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f3f972bf0c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f3f9826d050 RCX: 00007f3f9815aee9 RDX: 0000000020000000 RSI: 0000000020001300 RDI: 0000000000000007 RBP: 00007f3f981b63bd R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f3f9826d050 R15: 00007ffe01ee6768 If drop_monitor is built as a kernel module, syzkaller may have time to send a netlink NET_DM_CMD_START message during the module loading. This will call the net_dm_monitor_start() function that uses a spinlock that has not yet been initialized. To fix this, let's place resource initialization above the registration of a generic netlink family. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Cc: stable(a)vger.kernel.org Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov(a)infotecs.ru> --- net/core/drop_monitor.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 6efd4cccc9dd..9755d2010e70 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -1734,6 +1734,11 @@ static int __init init_net_drop_monitor(void) return -ENOSPC; } + for_each_possible_cpu(cpu) { + net_dm_cpu_data_init(cpu); + net_dm_hw_cpu_data_init(cpu); + } + rc = genl_register_family(&net_drop_monitor_family); if (rc) { pr_err("Could not create drop monitor netlink family\n"); @@ -1749,11 +1754,6 @@ static int __init init_net_drop_monitor(void) rc = 0; - for_each_possible_cpu(cpu) { - net_dm_cpu_data_init(cpu); - net_dm_hw_cpu_data_init(cpu); - } - goto out; out_unreg: @@ -1772,13 +1772,12 @@ static void exit_net_drop_monitor(void) * Because of the module_get/put we do in the trace state change path * we are guaranteed not to have any current users when we get here */ + BUG_ON(genl_unregister_family(&net_drop_monitor_family)); for_each_possible_cpu(cpu) { net_dm_hw_cpu_data_fini(cpu); net_dm_cpu_data_fini(cpu); } - - BUG_ON(genl_unregister_family(&net_drop_monitor_family)); } module_init(init_net_drop_monitor); -- 2.39.5

9 months

2
2
0 0

[PATCH v2] drivers: core: fix device leak in __fw_devlink_relax_cycles()

by Luca Ceresoli

Commit bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic") introduced a new struct device *con_dev and a get_dev_from_fwnode() call to get it, but without adding a corresponding put_device(). Closes: https://lore.kernel.org/all/20241204124826.2e055091@booty/ Fixes: bac3b10b78e5 ("driver core: fw_devlink: Stop trying to optimize cycle detection logic") Cc: stable(a)vger.kernel.org Reviewed-by: Saravana Kannan <saravanak(a)google.com> Signed-off-by: Luca Ceresoli <luca.ceresoli(a)bootlin.com> --- Changes in v2: - add 'Cc: stable(a)vger.kernel.org' - use Closes: tag, not Link: - Link to v1: https://lore.kernel.org/r/20250212-fix__fw_devlink_relax_cycles_missing_dev… --- drivers/base/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index 5a1f051981149dc5b5eee4fb69c0ab748a85956d..2fde698430dff98b5e30f7be7d43d310289c4217 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -2079,6 +2079,7 @@ static bool __fw_devlink_relax_cycles(struct fwnode_handle *con_handle, out: sup_handle->flags &= ~FWNODE_FLAG_VISITED; put_device(sup_dev); + put_device(con_dev); put_device(par_dev); return ret; } --- base-commit: 09fbf3d502050282bf47ab3babe1d4ed54dd1fd8 change-id: 20250212-fix__fw_devlink_relax_cycles_missing_device_put-37cae5f4aac0 Best regards, -- Luca Ceresoli <luca.ceresoli(a)bootlin.com>

9 months

1
0
0 0

[PATCH] ACPI: GTDT: Relax sanity checking on Platform Timers array count

by Oliver Upton

Perhaps unsurprisingly there are some platforms where the GTDT isn't quite right and the Platforms Timer array overflows the length of the overall table. While the recently-added sanity checking isn't wrong, it makes it impossible to boot the kernel on offending platforms. Try to hobble along and limit the Platform Timer count to the bounds of the table. Cc: Marc Zyngier <maz(a)kernel.org> Cc: Lorenzo Pieralisi <lpieralisi(a)kernel.org> Cc: Zheng Zengkai <zhengzengkai(a)huawei.com> Cc: stable(a)vger.kernel.org Fixes: 263e22d6bd1f ("ACPI: GTDT: Tighten the check for the array of platform timer structures") Signed-off-by: Oliver Upton <oliver.upton(a)linux.dev> --- drivers/acpi/arm64/gtdt.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/acpi/arm64/gtdt.c b/drivers/acpi/arm64/gtdt.c index 3561553eff8b..70f8290b659d 100644 --- a/drivers/acpi/arm64/gtdt.c +++ b/drivers/acpi/arm64/gtdt.c @@ -163,7 +163,7 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, { void *platform_timer; struct acpi_table_gtdt *gtdt; - int cnt = 0; + u32 cnt = 0; gtdt = container_of(table, struct acpi_table_gtdt, header); acpi_gtdt_desc.gtdt = gtdt; @@ -188,13 +188,17 @@ int __init acpi_gtdt_init(struct acpi_table_header *table, cnt++; if (cnt != gtdt->platform_timer_count) { + cnt = min(cnt, gtdt->platform_timer_count); + pr_err(FW_BUG "limiting Platform Timer count to %d\n", cnt); + } + + if (!cnt) { acpi_gtdt_desc.platform_timer = NULL; - pr_err(FW_BUG "invalid timer data.\n"); - return -EINVAL; + return 0; } if (platform_timer_count) - *platform_timer_count = gtdt->platform_timer_count; + *platform_timer_count = cnt; return 0; } base-commit: ffd294d346d185b70e28b1a28abe367bbfe53c04 -- 2.48.1.262.g85cc9f2d1e-goog

9 months

4
5
0 0

[PATCH 1/2] drm/xe/userptr: fix EFAULT handling

by Matthew Auld

Currently we treat EFAULT from hmm_range_fault() as a non-fatal error when called from xe_vm_userptr_pin() with the idea that we want to avoid killing the entire vm and chucking an error, under the assumption that the user just did an unmap or something, and has no intention of actually touching that memory from the GPU. At this point we have already zapped the PTEs so any access should generate a page fault, and if the pin fails there also it will then become fatal. However it looks like it's possible for the userptr vma to still be on the rebind list in preempt_rebind_work_func(), if we had to retry the pin again due to something happening in the caller before we did the rebind step, but in the meantime needing to re-validate the userptr and this time hitting the EFAULT. This might explain an internal user report of hitting: [ 191.738349] WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/xe/xe_res_cursor.h:158 xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738551] Workqueue: xe-ordered-wq preempt_rebind_work_func [xe] [ 191.738616] RIP: 0010:xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738690] Call Trace: [ 191.738692] <TASK> [ 191.738694] ? show_regs+0x69/0x80 [ 191.738698] ? __warn+0x93/0x1a0 [ 191.738703] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738759] ? report_bug+0x18f/0x1a0 [ 191.738764] ? handle_bug+0x63/0xa0 [ 191.738767] ? exc_invalid_op+0x19/0x70 [ 191.738770] ? asm_exc_invalid_op+0x1b/0x20 [ 191.738777] ? xe_pt_stage_bind.constprop.0+0x60a/0x6b0 [xe] [ 191.738834] ? ret_from_fork_asm+0x1a/0x30 [ 191.738849] bind_op_prepare+0x105/0x7b0 [xe] [ 191.738906] ? dma_resv_reserve_fences+0x301/0x380 [ 191.738912] xe_pt_update_ops_prepare+0x28c/0x4b0 [xe] [ 191.738966] ? kmemleak_alloc+0x4b/0x80 [ 191.738973] ops_execute+0x188/0x9d0 [xe] [ 191.739036] xe_vm_rebind+0x4ce/0x5a0 [xe] [ 191.739098] ? trace_hardirqs_on+0x4d/0x60 [ 191.739112] preempt_rebind_work_func+0x76f/0xd00 [xe] Followed by NPD, when running some workload, since the sg was never actually populated but the vma is still marked for rebind when it should be skipped for this special EFAULT case. And from the logs it does seem like we hit this special EFAULT case before the explosions. Fixes: 521db22a1d70 ("drm/xe: Invalidate userptr VMA on page pin fault") Signed-off-by: Matthew Auld <matthew.auld(a)intel.com> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> # v6.10+ --- drivers/gpu/drm/xe/xe_vm.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index d664f2e418b2..1caee9cbeafb 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -692,6 +692,17 @@ int xe_vm_userptr_pin(struct xe_vm *vm) xe_vm_unlock(vm); if (err) return err; + + /* + * We might have already done the pin once already, but then had to retry + * before the re-bind happended, due some other condition in the caller, but + * in the meantime the userptr got dinged by the notifier such that we need + * to revalidate here, but this time we hit the EFAULT. In such a case + * make sure we remove ourselves from the rebind list to avoid going down in + * flames. + */ + if (!list_empty(&uvma->vma.combined_links.rebind)) + list_del_init(&uvma->vma.combined_links.rebind); } else { if (err < 0) return err; -- 2.48.1

9 months

1
0
0 0

[PATCH RFC 1/2] acpi: typec: ucsi: Introduce a ->poll_cci method

by Fedor Pchelkin

From: "Christian A. Ehrhardt" <lk(a)c--e.de> For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods. Fixes: fa48d7e81624 ("usb: typec: ucsi: Do not call ACPI _DSM method for UCSI read operations") Cc: stable(a)vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk(a)c--e.de> Tested-by: Fedor Pchelkin <boddah8794(a)gmail.com> Signed-off-by: Fedor Pchelkin <boddah8794(a)gmail.com> --- Add the explicit WARNING splat and slightly increase the length of text lines in the changelog. Original patch: https://lore.kernel.org/linux-usb/Z2Cf1AI8CXao5ZAn@cae.in-ulm.de/ drivers/usb/typec/ucsi/ucsi.c | 10 +++++----- drivers/usb/typec/ucsi/ucsi.h | 2 ++ drivers/usb/typec/ucsi/ucsi_acpi.c | 21 ++++++++++++++------- drivers/usb/typec/ucsi/ucsi_ccg.c | 1 + drivers/usb/typec/ucsi/ucsi_glink.c | 1 + drivers/usb/typec/ucsi/ucsi_stm32g0.c | 1 + drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 1 + 7 files changed, 25 insertions(+), 12 deletions(-) diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index fcf499cc9458..0fe1476f4c29 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -1346,7 +1346,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) mutex_lock(&ucsi->ppm_lock); - ret = ucsi->ops->read_cci(ucsi, &cci); + ret = ucsi->ops->poll_cci(ucsi, &cci); if (ret < 0) goto out; @@ -1364,7 +1364,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS); do { - ret = ucsi->ops->read_cci(ucsi, &cci); + ret = ucsi->ops->poll_cci(ucsi, &cci); if (ret < 0) goto out; if (cci & UCSI_CCI_COMMAND_COMPLETE) @@ -1393,7 +1393,7 @@ static int ucsi_reset_ppm(struct ucsi *ucsi) /* Give the PPM time to process a reset before reading CCI */ msleep(20); - ret = ucsi->ops->read_cci(ucsi, &cci); + ret = ucsi->ops->poll_cci(ucsi, &cci); if (ret) goto out; @@ -1929,8 +1929,8 @@ struct ucsi *ucsi_create(struct device *dev, const struct ucsi_operations *ops) struct ucsi *ucsi; if (!ops || - !ops->read_version || !ops->read_cci || !ops->read_message_in || - !ops->sync_control || !ops->async_control) + !ops->read_version || !ops->read_cci || !ops->poll_cci || + !ops->read_message_in || !ops->sync_control || !ops->async_control) return ERR_PTR(-EINVAL); ucsi = kzalloc(sizeof(*ucsi), GFP_KERNEL); diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 82735eb34f0e..28780acc4af2 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -62,6 +62,7 @@ struct dentry; * struct ucsi_operations - UCSI I/O operations * @read_version: Read implemented UCSI version * @read_cci: Read CCI register + * @poll_cci: Read CCI register while polling with notifications disabled * @read_message_in: Read message data from UCSI * @sync_control: Blocking control operation * @async_control: Non-blocking control operation @@ -76,6 +77,7 @@ struct dentry; struct ucsi_operations { int (*read_version)(struct ucsi *ucsi, u16 *version); int (*read_cci)(struct ucsi *ucsi, u32 *cci); + int (*poll_cci)(struct ucsi *ucsi, u32 *cci); int (*read_message_in)(struct ucsi *ucsi, void *val, size_t val_len); int (*sync_control)(struct ucsi *ucsi, u64 command); int (*async_control)(struct ucsi *ucsi, u64 command); diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index 5c5515551963..ac1ebb5d9527 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -59,19 +59,24 @@ static int ucsi_acpi_read_version(struct ucsi *ucsi, u16 *version) static int ucsi_acpi_read_cci(struct ucsi *ucsi, u32 *cci) { struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); - int ret; - - if (UCSI_COMMAND(ua->cmd) == UCSI_PPM_RESET) { - ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ); - if (ret) - return ret; - } memcpy(cci, ua->base + UCSI_CCI, sizeof(*cci)); return 0; } +static int ucsi_acpi_poll_cci(struct ucsi *ucsi, u32 *cci) +{ + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); + int ret; + + ret = ucsi_acpi_dsm(ua, UCSI_DSM_FUNC_READ); + if (ret) + return ret; + + return ucsi_acpi_read_cci(ucsi, cci); +} + static int ucsi_acpi_read_message_in(struct ucsi *ucsi, void *val, size_t val_len) { struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); @@ -94,6 +99,7 @@ static int ucsi_acpi_async_control(struct ucsi *ucsi, u64 command) static const struct ucsi_operations ucsi_acpi_ops = { .read_version = ucsi_acpi_read_version, .read_cci = ucsi_acpi_read_cci, + .poll_cci = ucsi_acpi_poll_cci, .read_message_in = ucsi_acpi_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = ucsi_acpi_async_control @@ -142,6 +148,7 @@ static int ucsi_gram_sync_control(struct ucsi *ucsi, u64 command) static const struct ucsi_operations ucsi_gram_ops = { .read_version = ucsi_acpi_read_version, .read_cci = ucsi_acpi_read_cci, + .poll_cci = ucsi_acpi_poll_cci, .read_message_in = ucsi_gram_read_message_in, .sync_control = ucsi_gram_sync_control, .async_control = ucsi_acpi_async_control diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 740171f24ef9..4b1668733a4b 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -664,6 +664,7 @@ static int ucsi_ccg_sync_control(struct ucsi *ucsi, u64 command) static const struct ucsi_operations ucsi_ccg_ops = { .read_version = ucsi_ccg_read_version, .read_cci = ucsi_ccg_read_cci, + .poll_cci = ucsi_ccg_read_cci, .read_message_in = ucsi_ccg_read_message_in, .sync_control = ucsi_ccg_sync_control, .async_control = ucsi_ccg_async_control, diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index fed39d458090..8af79101a2fc 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -206,6 +206,7 @@ static void pmic_glink_ucsi_connector_status(struct ucsi_connector *con) static const struct ucsi_operations pmic_glink_ucsi_ops = { .read_version = pmic_glink_ucsi_read_version, .read_cci = pmic_glink_ucsi_read_cci, + .poll_cci = pmic_glink_ucsi_read_cci, .read_message_in = pmic_glink_ucsi_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = pmic_glink_ucsi_async_control, diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c index 6923fad31d79..57ef7d83a412 100644 --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c @@ -424,6 +424,7 @@ static irqreturn_t ucsi_stm32g0_irq_handler(int irq, void *data) static const struct ucsi_operations ucsi_stm32g0_ops = { .read_version = ucsi_stm32g0_read_version, .read_cci = ucsi_stm32g0_read_cci, + .poll_cci = ucsi_stm32g0_read_cci, .read_message_in = ucsi_stm32g0_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = ucsi_stm32g0_async_control, diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c index 4cae85c0dc12..d33e3f2dd1d8 100644 --- a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c @@ -74,6 +74,7 @@ static int yoga_c630_ucsi_async_control(struct ucsi *ucsi, u64 command) static const struct ucsi_operations yoga_c630_ucsi_ops = { .read_version = yoga_c630_ucsi_read_version, .read_cci = yoga_c630_ucsi_read_cci, + .poll_cci = yoga_c630_ucsi_read_cci, .read_message_in = yoga_c630_ucsi_read_message_in, .sync_control = ucsi_sync_control_common, .async_control = yoga_c630_ucsi_async_control, -- 2.48.1

9 months

4
3
0 0

[PATCH v2, 1/1] usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY

by joswang

From: Jos Wang <joswang(a)lenovo.com> As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is used by the Policy Engine in Dual-Role Power device that is currently acting as a Sink to timeout on a PS_RDY Message during a Power Role Swap sequence. This condition leads to a Hard Reset for USB Type-A and Type-B Plugs and Error Recovery for Type-C plugs and return to USB Default Operation. Therefore, after PSSourceOffTimer timeout, the tcpm state machine should switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also solve the test items in the USB power delivery compliance test: TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout [1] https://usb.org/document-library/usb-power-delivery-compliance-test-specifi… Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable(a)vger.kernel.org Signed-off-by: Jos Wang <joswang(a)lenovo.com> --- v2: Modify the commit message, remove unnecessary blank lines. drivers/usb/typec/tcpm/tcpm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 47be450d2be3..6bf1a22c785a 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -5591,8 +5591,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, port->pps_data.active, 0); tcpm_set_charge(port, false); - tcpm_set_state(port, hard_reset_state(port), - port->timings.ps_src_off_time); + tcpm_set_state(port, ERROR_RECOVERY, port->timings.ps_src_off_time); break; case PR_SWAP_SNK_SRC_SOURCE_ON: tcpm_enable_auto_vbus_discharge(port, true); -- 2.17.1

9 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror