- Linux-stable-mirror - lists.linaro.org

[PATCH 1/1] usb: typec: tcpm: PSSourceOffTimer timeout in PR_Swap enters ERROR_RECOVERY

by joswang

From: Jos Wang <joswang(a)lenovo.com> As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is used by the Policy Engine in Dual-Role Power device that is currently acting as a Sink to timeout on a PS_RDY Message during a Power Role Swap sequence. This condition leads to a Hard Reset for USB Type-A and Type-B Plugs and Error Recovery for Type-C plugs and return to USB Default Operation. Therefore, after PSSourceOffTimer timeout, the tcpm state machine should switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also solve the test items in the USB power delivery compliance test: TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout [1] https://usb.org/document-library/usb-power-delivery-compliance-test-specifi… Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable(a)vger.kernel.org Signed-off-by: Jos Wang <joswang(a)lenovo.com> --- drivers/usb/typec/tcpm/tcpm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 47be450d2be3..6bf1a22c785a 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -5591,8 +5591,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_auto_vbus_discharge_threshold(port, TYPEC_PWR_MODE_USB, port->pps_data.active, 0); tcpm_set_charge(port, false); - tcpm_set_state(port, hard_reset_state(port), - port->timings.ps_src_off_time); + tcpm_set_state(port, ERROR_RECOVERY, port->timings.ps_src_off_time); break; case PR_SWAP_SNK_SRC_SOURCE_ON: tcpm_enable_auto_vbus_discharge(port, true); -- 2.17.1

9 months

5
6
0 0

FW: [PATCH] usb: xhci: lack of clearing xHC resources

by Pawel Laszczak

The xHC resources allocated for USB devices are not released in correct order after resuming in case when while suspend device was reconnected. This issue has been detected during the fallowing scenario: - connect hub HS to root port - connect LS/FS device to hub port - wait for enumeration to finish - force DUT to suspend - reconnect hub attached to root port - wake DUT For this scenario during enumeration of USB LS/FS device the Cadence xHC reports completion error code for xHCi commands because the devices was not property disconnected and in result the xHC resources has not been correct freed. XHCI specification doesn't mention that device can be reset in any order so, we should not treat this issue as Cadence xHC controller bug. Similar as during disconnecting in this case the device should be cleared starting form the last usb device in tree toward the root hub. To fix this issue usbcore driver should disconnect all USB devices connected to hub which was reconnected while suspending. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable(a)vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell(a)cadence.com> --- drivers/usb/core/hub.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0cd44f1fd56d..2473cbf317a8 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3627,10 +3627,12 @@ static int finish_port_resume(struct usb_device *udev) * the device will be rediscovered. */ retry_reset_resume: - if (udev->quirks & USB_QUIRK_RESET) + if (udev->quirks & USB_QUIRK_RESET) { status = -ENODEV; - else + } else { + hub_disconnect_children(udev); status = usb_reset_and_verify_device(udev); + } } /* 10.5.4.5 says be sure devices in the tree are still there. -- 2.43.0

9 months

2
2
0 0

FAILED: patch "[PATCH] maple_tree: simplify split calculation" failed to apply to 6.1-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.1-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y git checkout FETCH_HEAD git cherry-pick -x 4f6a6bed0bfef4b966f076f33eb4f5547226056a # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021128-repeater-percolate-6131@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 4f6a6bed0bfef4b966f076f33eb4f5547226056a Mon Sep 17 00:00:00 2001 From: Wei Yang <richard.weiyang(a)gmail.com> Date: Wed, 13 Nov 2024 03:16:14 +0000 Subject: [PATCH] maple_tree: simplify split calculation Patch series "simplify split calculation", v3. This patch (of 3): The current calculation for splitting nodes tries to enforce a minimum span on the leaf nodes. This code is complex and never worked correctly to begin with, due to the min value being passed as 0 for all leaves. The calculation should just split the data as equally as possible between the new nodes. Note that b_end will be one more than the data, so the left side is still favoured in the calculation. The current code may also lead to a deficient node by not leaving enough data for the right side of the split. This issue is also addressed with the split calculation change. [Liam.Howlett(a)Oracle.com: rephrase the change log] Link: https://lkml.kernel.org/r/20241113031616.10530-1-richard.weiyang@gmail.com Link: https://lkml.kernel.org/r/20241113031616.10530-2-richard.weiyang@gmail.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Wei Yang <richard.weiyang(a)gmail.com> Reviewed-by: Liam R. Howlett <Liam.Howlett(a)Oracle.com> Cc: Sidhartha Kumar <sidhartha.kumar(a)oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> diff --git a/lib/maple_tree.c b/lib/maple_tree.c index fe7f9e1f5bbb..ca8ae1e1cc0a 100644 --- a/lib/maple_tree.c +++ b/lib/maple_tree.c @@ -1863,11 +1863,11 @@ static inline int mab_no_null_split(struct maple_big_node *b_node, * Return: The first split location. The middle split is set in @mid_split. */ static inline int mab_calc_split(struct ma_state *mas, - struct maple_big_node *bn, unsigned char *mid_split, unsigned long min) + struct maple_big_node *bn, unsigned char *mid_split) { unsigned char b_end = bn->b_end; int split = b_end / 2; /* Assume equal split. */ - unsigned char slot_min, slot_count = mt_slots[bn->type]; + unsigned char slot_count = mt_slots[bn->type]; /* * To support gap tracking, all NULL entries are kept together and a node cannot @@ -1900,18 +1900,7 @@ static inline int mab_calc_split(struct ma_state *mas, split = b_end / 3; *mid_split = split * 2; } else { - slot_min = mt_min_slots[bn->type]; - *mid_split = 0; - /* - * Avoid having a range less than the slot count unless it - * causes one node to be deficient. - * NOTE: mt_min_slots is 1 based, b_end and split are zero. - */ - while ((split < slot_count - 1) && - ((bn->pivot[split] - min) < slot_count - 1) && - (b_end - split > slot_min)) - split++; } /* Avoid ending a node on a NULL entry */ @@ -2377,7 +2366,7 @@ static inline struct maple_enode static inline unsigned char mas_mab_to_node(struct ma_state *mas, struct maple_big_node *b_node, struct maple_enode **left, struct maple_enode **right, struct maple_enode **middle, - unsigned char *mid_split, unsigned long min) + unsigned char *mid_split) { unsigned char split = 0; unsigned char slot_count = mt_slots[b_node->type]; @@ -2390,7 +2379,7 @@ static inline unsigned char mas_mab_to_node(struct ma_state *mas, if (b_node->b_end < slot_count) { split = b_node->b_end; } else { - split = mab_calc_split(mas, b_node, mid_split, min); + split = mab_calc_split(mas, b_node, mid_split); *right = mas_new_ma_node(mas, b_node); } @@ -2877,7 +2866,7 @@ static void mas_spanning_rebalance(struct ma_state *mas, mast->bn->b_end--; mast->bn->type = mte_node_type(mast->orig_l->node); split = mas_mab_to_node(mas, mast->bn, &left, &right, &middle, - &mid_split, mast->orig_l->min); + &mid_split); mast_set_split_parents(mast, left, middle, right, split, mid_split); mast_cp_to_nodes(mast, left, middle, right, split, mid_split); @@ -3365,7 +3354,7 @@ static void mas_split(struct ma_state *mas, struct maple_big_node *b_node) if (mas_push_data(mas, height, &mast, false)) break; - split = mab_calc_split(mas, b_node, &mid_split, prev_l_mas.min); + split = mab_calc_split(mas, b_node, &mid_split); mast_split_data(&mast, mas, split); /* * Usually correct, mab_mas_cp in the above call overwrites

9 months

3
2
0 0

[PATCH v6.6-v6.1] x86/mm/ident_map: Use gbpages only where full GB page should be mapped.

by hsimeliere.opensource＠witekio.com

From: Steve Wahl <steve.wahl(a)hpe.com> [ Upstream commit cc31744a294584a36bf764a0ffa3255a8e69f036 ] When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. Signed-off-by: Steve Wahl <steve.wahl(a)hpe.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Tested-by: Pavin Joseph <me(a)pavinjoseph.com> Tested-by: Sarah Brofeldt <srhb(a)dbc.dk> Tested-by: Eric Hagberg <ehagberg(a)gmail.com> Link: https://lore.kernel.org/all/20240717213121.3064030-3-steve.wahl@hpe.com Signed-off-by: Bruno VERNAY <bruno.vernay(a)se.com> Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource(a)witekio.com> --- arch/x86/mm/ident_map.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/arch/x86/mm/ident_map.c b/arch/x86/mm/ident_map.c index 968d7005f4a7..a204a332c71f 100644 --- a/arch/x86/mm/ident_map.c +++ b/arch/x86/mm/ident_map.c @@ -26,18 +26,31 @@ static int ident_pud_init(struct x86_mapping_info *info, pud_t *pud_page, for (; addr < end; addr = next) { pud_t *pud = pud_page + pud_index(addr); pmd_t *pmd; + bool use_gbpage; next = (addr & PUD_MASK) + PUD_SIZE; if (next > end) next = end; - if (info->direct_gbpages) { - pud_t pudval; + /* if this is already a gbpage, this portion is already mapped */ + if (pud_leaf(*pud)) + continue; + + /* Is using a gbpage allowed? */ + use_gbpage = info->direct_gbpages; - if (pud_present(*pud)) - continue; + /* Don't use gbpage if it maps more than the requested region. */ + /* at the begining: */ + use_gbpage &= ((addr & ~PUD_MASK) == 0); + /* ... or at the end: */ + use_gbpage &= ((next & ~PUD_MASK) == 0); + + /* Never overwrite existing mappings */ + use_gbpage &= !pud_present(*pud); + + if (use_gbpage) { + pud_t pudval; - addr &= PUD_MASK; pudval = __pud((addr - info->offset) | info->page_flag); set_pud(pud, pudval); continue; -- 2.43.0

9 months

2
1
0 0

[PATCH 6.6] net: Fix icmp host relookup triggering ip_rt_bug

by vgiraud.opensource＠witekio.com

From: Dong Chenchen <dongchenchen2(a)huawei.com> [ Upstream commit c44daa7e3c73229f7ac74985acb8c7fb909c4e0a ] arp link failure may trigger ip_rt_bug while xfrm enabled, call trace is: WARNING: CPU: 0 PID: 0 at net/ipv4/route.c:1241 ip_rt_bug+0x14/0x20 Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc6-00077-g2e1b3cc9d7f7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: <IRQ> ip_send_skb+0x14/0x40 __icmp_send+0x42d/0x6a0 ipv4_link_failure+0xe2/0x1d0 arp_error_report+0x3c/0x50 neigh_invalidate+0x8d/0x100 neigh_timer_handler+0x2e1/0x330 call_timer_fn+0x21/0x120 __run_timer_base.part.0+0x1c9/0x270 run_timer_softirq+0x4c/0x80 handle_softirqs+0xac/0x280 irq_exit_rcu+0x62/0x80 sysvec_apic_timer_interrupt+0x77/0x90 The script below reproduces this scenario: ip xfrm policy add src 0.0.0.0/0 dst 0.0.0.0/0 \ dir out priority 0 ptype main flag localok icmp ip l a veth1 type veth ip a a 192.168.141.111/24 dev veth0 ip l s veth0 up ping 192.168.141.155 -c 1 icmp_route_lookup() create input routes for locally generated packets while xfrm relookup ICMP traffic.Then it will set input route (dst->out = ip_rt_bug) to skb for DESTUNREACH. For ICMP err triggered by locally generated packets, dst->dev of output route is loopback. Generally, xfrm relookup verification is not required on loopback interfaces (net.ipv4.conf.lo.disable_xfrm = 1). Skip icmp relookup for locally generated packets to fix it. Fixes: 8b7817f3a959 ("[IPSEC]: Add ICMP host relookup support") Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> Reviewed-by: David Ahern <dsahern(a)kernel.org> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Link: https://patch.msgid.link/20241127040850.1513135-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Bruno VERNAY <bruno.vernay(a)se.com> Signed-off-by: Victor Giraud <vgiraud.opensource(a)witekio.com> --- net/ipv4/icmp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 9dffdd876fef..ab830c093f7e 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -522,6 +522,9 @@ static struct rtable *icmp_route_lookup(struct net *net, if (rt != rt2) return rt; } else if (PTR_ERR(rt) == -EPERM) { + if (inet_addr_type_dev_table(net, route_lookup_dev, + fl4->daddr) == RTN_LOCAL) + return rt; rt = NULL; } else return rt; -- 2.34.1

9 months

3
2
0 0

FAILED: patch "[PATCH] fs: fix adding security options to statmount.mnt_opt" failed to apply to 6.13-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 6.13-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. To reproduce the conflict and resubmit, you may use the following commands: git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.13.y git checkout FETCH_HEAD git cherry-pick -x 5eb987105357cb7cfa7cf3b1e2f66d5c0977e412 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to '<stable(a)vger.kernel.org>' --in-reply-to '2025021142-whoops-explicit-4d75@gregkh' --subject-prefix 'PATCH 6.13.y' HEAD^.. Possible dependencies: thanks, greg k-h ------------------ original commit in Linus's tree ------------------ From 5eb987105357cb7cfa7cf3b1e2f66d5c0977e412 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi <mszeredi(a)redhat.com> Date: Wed, 29 Jan 2025 16:12:53 +0100 Subject: [PATCH] fs: fix adding security options to statmount.mnt_opt Prepending security options was made conditional on sb->s_op->show_options, but security options are independent of sb options. Fixes: 056d33137bf9 ("fs: prepend statmount.mnt_opts string with security_sb_mnt_opts()") Fixes: f9af549d1fd3 ("fs: export mount options via statmount()") Cc: stable(a)vger.kernel.org # v6.11 Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Link: https://lore.kernel.org/r/20250129151253.33241-1-mszeredi@redhat.com Signed-off-by: Christian Brauner <brauner(a)kernel.org> diff --git a/fs/namespace.c b/fs/namespace.c index 9c4d307a82cd..8f1000f9f3df 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -5087,31 +5087,30 @@ static int statmount_mnt_opts(struct kstatmount *s, struct seq_file *seq) { struct vfsmount *mnt = s->mnt; struct super_block *sb = mnt->mnt_sb; + size_t start = seq->count; int err; + err = security_sb_show_options(seq, sb); + if (err) + return err; + if (sb->s_op->show_options) { - size_t start = seq->count; - - err = security_sb_show_options(seq, sb); - if (err) - return err; - err = sb->s_op->show_options(seq, mnt->mnt_root); if (err) return err; - - if (unlikely(seq_has_overflowed(seq))) - return -EAGAIN; - - if (seq->count == start) - return 0; - - /* skip leading comma */ - memmove(seq->buf + start, seq->buf + start + 1, - seq->count - start - 1); - seq->count--; } + if (unlikely(seq_has_overflowed(seq))) + return -EAGAIN; + + if (seq->count == start) + return 0; + + /* skip leading comma */ + memmove(seq->buf + start, seq->buf + start + 1, + seq->count - start - 1); + seq->count--; + return 0; }

9 months

3
2
0 0

[PATCH v2] usb: roles: set switch registered flag early on

by Elson Roy Serrao

The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") cc: stable(a)vger.kernel.org Signed-off-by: Elson Roy Serrao <quic_eserrao(a)quicinc.com> --- Changes in v2: - Set the switch registered flag from the get-go as suggested by Heikki. - Modified subject line and commit next as per the new logic. - Link to v1: https://lore.kernel.org/all/20250127230715.6142-1-quic_eserrao@quicinc.com/ drivers/usb/roles/class.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c index c58a12c147f4..30482d4cf826 100644 --- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -387,8 +387,11 @@ usb_role_switch_register(struct device *parent, dev_set_name(&sw->dev, "%s-role-switch", desc->name ? desc->name : dev_name(parent)); + sw->registered = true; + ret = device_register(&sw->dev); if (ret) { + sw->registered = false; put_device(&sw->dev); return ERR_PTR(ret); } @@ -399,8 +402,6 @@ usb_role_switch_register(struct device *parent, dev_warn(&sw->dev, "failed to add component\n"); } - sw->registered = true; - /* TODO: Symlinks for the host port and the device controller. */ return sw; -- 2.17.1

9 months

2
1
0 0

[PATCH] fuse: revert back to __readahead_folio() for readahead

by Joanne Koong

In 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the logic was converted to using the new folio readahead code, which drops the reference on the folio once it is locked, using an inferred reference on the folio. Previously we held a reference on the folio for the entire duration of the readpages call. This is fine, however for the case for splice pipe responses where we will remove the old folio and splice in the new folio (see fuse_try_move_page()), we assume that there is a reference held on the folio for ap->folios, which is no longer the case. To fix this, revert back to __readahead_folio() which allows us to hold the reference on the folio for the duration of readpages until either we drop the reference ourselves in fuse_readpages_end() or the reference is dropped after it's replaced in the page cache in the splice case. This will fix the UAF bug that was reported. Link: https://lore.kernel.org/linux-fsdevel/2f681f48-00f5-4e09-8431-2b3dbfaa881e@… Fixes: 3eab9d7bc2f4 ("fuse: convert readahead to use folios") Reported-by: Christian Heusel <christian(a)heusel.eu> Closes: https://lore.kernel.org/all/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/ Closes: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/110 Reported-by: Mantas Mikulėnas <grawity(a)gmail.com> Closes: https://lore.kernel.org/all/34feb867-09e2-46e4-aa31-d9660a806d1a@gmail.com/ Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1236660 Cc: <stable(a)vger.kernel.org> Signed-off-by: Joanne Koong <joannelkoong(a)gmail.com> Reviewed-by: Jeff Layton <jlayton(a)kernel.org> --- fs/fuse/dev.c | 6 ++++++ fs/fuse/file.c | 13 +++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 3c03aac480a4..de9e25e7dd2d 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -933,6 +933,12 @@ static int fuse_check_folio(struct folio *folio) return 0; } +/* + * Attempt to steal a page from the splice() pipe and move it into the + * pagecache. If successful, the pointer in @pagep will be updated. The + * folio that was originally in @pagep will lose a reference and the new + * folio returned in @pagep will carry a reference. + */ static int fuse_try_move_page(struct fuse_copy_state *cs, struct page **pagep) { int err; diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 7d92a5479998..d63e56fd3dd2 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -955,8 +955,10 @@ static void fuse_readpages_end(struct fuse_mount *fm, struct fuse_args *args, fuse_invalidate_atime(inode); } - for (i = 0; i < ap->num_folios; i++) + for (i = 0; i < ap->num_folios; i++) { folio_end_read(ap->folios[i], !err); + folio_put(ap->folios[i]); + } if (ia->ff) fuse_file_put(ia->ff, false); @@ -1048,7 +1050,14 @@ static void fuse_readahead(struct readahead_control *rac) ap = &ia->ap; while (ap->num_folios < cur_pages) { - folio = readahead_folio(rac); + /* + * This returns a folio with a ref held on it. + * The ref needs to be held until the request is + * completed, since the splice case (see + * fuse_try_move_page()) drops the ref after it's + * replaced in the page cache. + */ + folio = __readahead_folio(rac); ap->folios[ap->num_folios] = folio; ap->descs[ap->num_folios].length = folio_size(folio); ap->num_folios++; -- 2.43.5

9 months

2
1
0 0

[PATCH] ALSA: hda: Add error check for snd_ctl_rename_id() in snd_hda_create_dig_out_ctls()

by Wentao Liang

Check the return value of snd_ctl_rename_id() in snd_hda_create_dig_out_ctls(). Ensure that potential failures are properly handled. Fixes: 5c219a340850 ("ALSA: hda: Fix kctl->id initialization") Cc: stable(a)vger.kernel.org # 6.4+ Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- sound/pci/hda/hda_codec.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 14763c0f31ad..46a220404999 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2470,7 +2470,9 @@ int snd_hda_create_dig_out_ctls(struct hda_codec *codec, break; id = kctl->id; id.index = spdif_index; - snd_ctl_rename_id(codec->card, &kctl->id, &id); + err = snd_ctl_rename_id(codec->card, &kctl->id, &id); + if (err < 0) + return err; } bus->primary_dig_out_type = HDA_PCM_TYPE_HDMI; } -- 2.42.0.windows.2

9 months

3
2
0 0

Quick Reply-Integrated Systems Europe 2025!

by Grace Green

Hi, Following up on my primary email about the visitor list. Please let me know your thoughts, and I'd be happy to give more details. Best regards, Grace Subject: Integrated Systems Europe 2025! Hi, Are you interested in the latest attendee and exhibitor lists for Integrated Systems Europe 2025? This comprehensive database now includes last-minute registrants, providing you with up-to-date and actionable insights. Event Details: Location: Fira Barcelona Gran Via, Barcelona, Spain Exhibitors: 1,460 Attendees: 73,891 Data fields: Induvial Email address, Cell Phone Number, Contact Name, Job Title, Company Name, Company website, Physical Address and more), Would you like details on the attendees list, exhibitors list, or both? Let me know, and I’ll be happy to share pricing details and answer any questions. Looking forward to hearing from you! Best regards, Grace Green Sr. Demand Generation P.S. If you’d prefer not to receive updates, simply reply with “NO.”

9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror