- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] Patch "x86/microcode/AMD: Do not load when running on a hypervisor" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled x86/microcode/AMD: Do not load when running on a hypervisor to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: x86-microcode-amd-do-not-load-when-running-on-a-hypervisor.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a15a753539eca8ba243d576f02e7ca9c4b7d7042 Mon Sep 17 00:00:00 2001 From: Borislav Petkov <bp(a)suse.de> Date: Sun, 18 Dec 2016 17:44:13 +0100 Subject: x86/microcode/AMD: Do not load when running on a hypervisor From: Borislav Petkov <bp(a)suse.de> commit a15a753539eca8ba243d576f02e7ca9c4b7d7042 upstream. Doing so is completely void of sense for multiple reasons so prevent it. Set dis_ucode_ldr to true and thus disable the microcode loader by default to address xen pv guests which execute the AP path but not the BSP path. By having it turned off by default, the APs won't run into the loader either. Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the xen pv one. That one gets the aforementioned "fix". Also, improve the detection method by caching the final decision whether to continue loading in dis_ucode_ldr and do it once on the BSP. The APs then simply test that value. Signed-off-by: Borislav Petkov <bp(a)suse.de> Tested-by: Juergen Gross <jgross(a)suse.com> Tested-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Acked-by: Juergen Gross <jgross(a)suse.com> Link: http://lkml.kernel.org/r/20161218164414.9649-4-bp@alien8.de Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: Rolf Neugebauer <rolf.neugebauer(a)docker.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kernel/cpu/microcode/core.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -43,7 +43,7 @@ #define MICROCODE_VERSION "2.01" static struct microcode_ops *microcode_ops; -static bool dis_ucode_ldr; +static bool dis_ucode_ldr = true; /* * Synchronization. @@ -73,6 +73,7 @@ struct cpu_info_ctx { static bool __init check_loader_disabled_bsp(void) { static const char *__dis_opt_str = "dis_ucode_ldr"; + u32 a, b, c, d; #ifdef CONFIG_X86_32 const char *cmdline = (const char *)__pa_nodebug(boot_command_line); @@ -85,8 +86,23 @@ static bool __init check_loader_disabled bool *res = &dis_ucode_ldr; #endif - if (cmdline_find_option_bool(cmdline, option)) - *res = true; + if (!have_cpuid_p()) + return *res; + + a = 1; + c = 0; + native_cpuid(&a, &b, &c, &d); + + /* + * CPUID(1).ECX[31]: reserved for hypervisor use. This is still not + * completely accurate as xen pv guests don't see that CPUID bit set but + * that's good enough as they don't land on the BSP path anyway. + */ + if (c & BIT(31)) + return *res; + + if (cmdline_find_option_bool(cmdline, option) <= 0) + *res = false; return *res; } @@ -118,9 +134,6 @@ void __init load_ucode_bsp(void) if (check_loader_disabled_bsp()) return; - if (!have_cpuid_p()) - return; - vendor = x86_cpuid_vendor(); family = x86_cpuid_family(); @@ -154,9 +167,6 @@ void load_ucode_ap(void) if (check_loader_disabled_ap()) return; - if (!have_cpuid_p()) - return; - vendor = x86_cpuid_vendor(); family = x86_cpuid_family(); Patches currently in stable-queue which might be from bp(a)suse.de are queue-4.9/x86-microcode-amd-do-not-load-when-running-on-a-hypervisor.patch

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] [PATCH] rtlwifi: rtl8821ae: Fix connection lost problem correctly

by Larry Finger

There has been a coding error in rtl8821ae since it was first introduced, namely that an 8-bit register was read using a 16-bit read in _rtl8821ae_dbi_read(). This error was fixed with commit 40b368af4b75 ("rtlwifi: Fix alignment issues"); however, this change led to instability in the connection. To restore stability, this change was reverted in commit b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem"). Unfortunately, the unaligned access causes machine checks in ARM architecture, and we were finally forced to find the actual cause of the problem on x86 platforms. Following a suggestion from Pkshih <pkshih(a)realtek.com>, it was found that increasing the ASPM L1 latency from 0 to 7 fixed the instability. This parameter was varied to see if a smaller value would work; however, it appears that 7 is the safest value. A new symbol is defined for this quantity, thus it can be easily changed if necessary. Fixes: b8b8b16352cd ("rtlwifi: rtl8821ae: Fix connection lost problem") Cc: Stable <stable(a)vger.kernel.org> # 4.14+ Fix-suggested-by: Pkshih <pkshih(a)realtek.com> Signed-off-by: Larry Finger <Larry.Finger(a)lwfinger.net> --- Kalle, This patch should be submitted to 4.16. Larry --- drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c | 5 +++-- drivers/net/wireless/realtek/rtlwifi/wifi.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c index f20e77b4bb65..317c1b3101da 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c @@ -1123,7 +1123,7 @@ static u8 _rtl8821ae_dbi_read(struct rtl_priv *rtlpriv, u16 addr) } if (0 == tmp) { read_addr = REG_DBI_RDATA + addr % 4; - ret = rtl_read_word(rtlpriv, read_addr); + ret = rtl_read_byte(rtlpriv, read_addr); } return ret; } @@ -1165,7 +1165,8 @@ static void _rtl8821ae_enable_aspm_back_door(struct ieee80211_hw *hw) } tmp = _rtl8821ae_dbi_read(rtlpriv, 0x70f); - _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7)); + _rtl8821ae_dbi_write(rtlpriv, 0x70f, tmp | BIT(7) | + ASPM_L1_LATENCY << 3); tmp = _rtl8821ae_dbi_read(rtlpriv, 0x719); _rtl8821ae_dbi_write(rtlpriv, 0x719, tmp | BIT(3) | BIT(4)); diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h index 1c9ed28b42da..4f48b934ec01 100644 --- a/drivers/net/wireless/realtek/rtlwifi/wifi.h +++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h @@ -99,6 +99,7 @@ #define RTL_USB_MAX_RX_COUNT 100 #define QBSS_LOAD_SIZE 5 #define MAX_WMMELE_LENGTH 64 +#define ASPM_L1_LATENCY 7 #define TOTAL_CAM_ENTRY 32 -- 2.16.1

7 years, 4 months

3
3
0 0

[Linux-stable-mirror] [PATCH] drm/i915/breadcrumbs: Ignore unsubmitted signalers

by Chris Wilson

When a request is preempted, it is unsubmitted from the HW queue and removed from the active list of breadcrumbs. In the process, this however triggers the signaler and it may see the clear rbtree with the old, and still valid, seqno. This confuses the signaler into action and signaling the fence. Fixes: d6a2289d9d6b ("drm/i915: Remove the preempted request from the execution queue") Signed-off-by: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin(a)linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> # v4.12+ --- drivers/gpu/drm/i915/intel_breadcrumbs.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_breadcrumbs.c b/drivers/gpu/drm/i915/intel_breadcrumbs.c index efbc627a2a25..b955f7d7bd0f 100644 --- a/drivers/gpu/drm/i915/intel_breadcrumbs.c +++ b/drivers/gpu/drm/i915/intel_breadcrumbs.c @@ -588,29 +588,16 @@ void intel_engine_remove_wait(struct intel_engine_cs *engine, spin_unlock_irq(&b->rb_lock); } -static bool signal_valid(const struct drm_i915_gem_request *request) -{ - return intel_wait_check_request(&request->signaling.wait, request); -} - static bool signal_complete(const struct drm_i915_gem_request *request) { if (!request) return false; - /* If another process served as the bottom-half it may have already - * signalled that this wait is already completed. - */ - if (intel_wait_complete(&request->signaling.wait)) - return signal_valid(request); - - /* Carefully check if the request is complete, giving time for the + /* + * Carefully check if the request is complete, giving time for the * seqno to be visible or if the GPU hung. */ - if (__i915_request_irq_complete(request)) - return true; - - return false; + return __i915_request_irq_complete(request); } static struct drm_i915_gem_request *to_signaler(struct rb_node *rb) @@ -712,6 +699,7 @@ static int intel_breadcrumbs_signaler(void *arg) &request->fence.flags)) { local_bh_disable(); dma_fence_signal(&request->fence); + GEM_BUG_ON(!i915_gem_request_completed(request)); local_bh_enable(); /* kick start the tasklets */ } -- 2.15.1

7 years, 4 months

2
5
0 0

[Linux-stable-mirror] [PATCH 3.18] ARM: exynos_defconfig: enable CONFIG_ROOT_NFS and dependencies

by Guillaume Tucker

Enable CONFIG_ROOT_NFS and dependencies (CONFIG_NFS_*, CONFIG_IP_PNP) in order to be able to boot the Exynos devices with NFS root. Tested on exynos4412-odroidx2. Signed-off-by: Guillaume Tucker <guillaume.tucker(a)collabora.com> --- arch/arm/configs/exynos_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e21ef830a483..999ea477be54 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -33,6 +33,10 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y @@ -170,6 +174,10 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CRAMFS=y CONFIG_ROMFS_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y -- 2.11.0

7 years, 4 months

2
5
0 0

[Linux-stable-mirror] [PATCH] ALSA: hda - Fix headset mic detection problem for two Dell machines

by Hui Wang

One of them has the codec of alc256 and the other one has the codec of alc289. Cc: <stable(a)vger.kernel.org> Signed-off-by: Hui Wang <hui.wang(a)canonical.com> --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2347588..b791efe 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6735,6 +6735,11 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x14, 0x90170110}, {0x21, 0x02211020}), SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, + {0x12, 0x90a60130}, + {0x14, 0x90170110}, + {0x14, 0x01011020}, + {0x21, 0x0221101f}), + SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, ALC256_STANDARD_PINS), SND_HDA_PIN_QUIRK(0x10ec0256, 0x1043, "ASUS", ALC256_FIXUP_ASUS_MIC, {0x14, 0x90170110}, @@ -6803,6 +6808,10 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x12, 0x90a60120}, {0x14, 0x90170110}, {0x21, 0x0321101f}), + SND_HDA_PIN_QUIRK(0x10ec0289, 0x1028, "Dell", ALC225_FIXUP_DELL1_MIC_NO_PRESENCE, + {0x12, 0xb7a60130}, + {0x14, 0x90170110}, + {0x21, 0x04211020}), SND_HDA_PIN_QUIRK(0x10ec0290, 0x103c, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1, ALC290_STANDARD_PINS, {0x15, 0x04211040}, -- 2.7.4

7 years, 4 months

2
1
0 0

[Linux-stable-mirror] [PATCH 4.4.y 1/2] drm: rcar-du: Use the VBK interrupt for vblank events

by Nhan Nguyen

From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> commit cbbb90b0c084d7dfb2ed8e3fecf8df200fbdd2a0 upstream. When implementing support for interlaced modes, the driver switched from reporting vblank events on the vertical blanking (VBK) interrupt to the frame end interrupt (FRM). This incorrectly divided the reported refresh rate by two. Fix it by moving back to the VBK interrupt. Fixes: 906eff7fcada ("drm: rcar-du: Implement support for interlaced modes") Cc: stable(a)vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 9befd62..25bdab6 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -531,7 +531,7 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) status = rcar_du_crtc_read(rcrtc, DSSR); rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK); - if (status & DSSR_FRM) { + if (status & DSSR_VBK) { drm_handle_vblank(rcrtc->crtc.dev, rcrtc->index); rcar_du_crtc_finish_page_flip(rcrtc); ret = IRQ_HANDLED; -- 1.9.1

7 years, 4 months

3
3
0 0

[Linux-stable-mirror] [PATCH 4.9.y 2/2] drm: rcar-du: Fix race condition when disabling planes at CRTC stop

by Nhan Nguyen

From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> commit 641307df71fe77d7b38a477067495ede05d47295 upstream. When stopping the CRTC the driver must disable all planes and wait for the change to take effect at the next vblank. Merely calling drm_crtc_wait_one_vblank() is not enough, as the function doesn't include any mechanism to handle the race with vblank interrupts. Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that handles the vblank interrupt race. Cc: stable(a)vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 53 ++++++++++++++++++++++++++++++---- drivers/gpu/drm/rcar-du/rcar_du_crtc.h | 8 +++++ 2 files changed, 55 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 848f7f2..3322b15 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -392,6 +392,31 @@ static void rcar_du_crtc_start(struct rcar_du_crtc *rcrtc) rcrtc->started = true; } +static void rcar_du_crtc_disable_planes(struct rcar_du_crtc *rcrtc) +{ + struct rcar_du_device *rcdu = rcrtc->group->dev; + struct drm_crtc *crtc = &rcrtc->crtc; + u32 status; + /* Make sure vblank interrupts are enabled. */ + drm_crtc_vblank_get(crtc); + /* + * Disable planes and calculate how many vertical blanking interrupts we + * have to wait for. If a vertical blanking interrupt has been triggered + * but not processed yet, we don't know whether it occurred before or + * after the planes got disabled. We thus have to wait for two vblank + * interrupts in that case. + */ + spin_lock_irq(&rcrtc->vblank_lock); + rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0); + status = rcar_du_crtc_read(rcrtc, DSSR); + rcrtc->vblank_count = status & DSSR_VBK ? 2 : 1; + spin_unlock_irq(&rcrtc->vblank_lock); + if (!wait_event_timeout(rcrtc->vblank_wait, rcrtc->vblank_count == 0, + msecs_to_jiffies(100))) + dev_warn(rcdu->dev, "vertical blanking timeout\n"); + drm_crtc_vblank_put(crtc); +} + static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc) { struct drm_crtc *crtc = &rcrtc->crtc; @@ -400,17 +425,16 @@ static void rcar_du_crtc_stop(struct rcar_du_crtc *rcrtc) return; /* Disable all planes and wait for the change to take effect. This is - * required as the DSnPR registers are updated on vblank, and no vblank - * will occur once the CRTC is stopped. Disabling planes when starting - * the CRTC thus wouldn't be enough as it would start scanning out - * immediately from old frame buffers until the next vblank. + * required as the plane enable registers are updated on vblank, and no + * vblank will occur once the CRTC is stopped. Disabling planes when + * starting the CRTC thus wouldn't be enough as it would start scanning + * out immediately from old frame buffers until the next vblank. * * This increases the CRTC stop delay, especially when multiple CRTCs * are stopped in one operation as we now wait for one vblank per CRTC. * Whether this can be improved needs to be researched. */ - rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? DS2PR : DS1PR, 0); - drm_crtc_wait_one_vblank(crtc); + rcar_du_crtc_disable_planes(rcrtc); /* Disable vertical blanking interrupt reporting. We first need to wait * for page flip completion before stopping the CRTC as userspace @@ -548,10 +572,25 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) irqreturn_t ret = IRQ_NONE; u32 status; + spin_lock(&rcrtc->vblank_lock); + status = rcar_du_crtc_read(rcrtc, DSSR); rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK); if (status & DSSR_VBK) { + /* + * Wake up the vblank wait if the counter reaches 0. This must + * be protected by the vblank_lock to avoid races in + * rcar_du_crtc_disable_planes(). + */ + if (rcrtc->vblank_count) { + if (--rcrtc->vblank_count == 0) + wake_up(&rcrtc->vblank_wait); + } + } + spin_unlock(&rcrtc->vblank_lock); + + if (status & DSSR_VBK) { drm_crtc_handle_vblank(&rcrtc->crtc); rcar_du_crtc_finish_page_flip(rcrtc); ret = IRQ_HANDLED; @@ -606,6 +645,8 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int index) } init_waitqueue_head(&rcrtc->flip_wait); + init_waitqueue_head(&rcrtc->vblank_wait); + spin_lock_init(&rcrtc->vblank_lock); rcrtc->group = rgrp; rcrtc->mmio_offset = mmio_offsets[index]; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h index 6f08b7e..48bef05 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.h @@ -15,6 +15,7 @@ #define __RCAR_DU_CRTC_H__ #include <linux/mutex.h> +#include <linux/spinlock.h> #include <linux/wait.h> #include <drm/drmP.h> @@ -33,6 +34,9 @@ * @started: whether the CRTC has been started and is running * @event: event to post when the pending page flip completes * @flip_wait: wait queue used to signal page flip completion + * @vblank_lock: protects vblank_wait and vblank_count + * @vblank_wait: wait queue used to signal vertical blanking + * @vblank_count: number of vertical blanking interrupts to wait for * @outputs: bitmask of the outputs (enum rcar_du_output) driven by this CRTC * @group: CRTC group this CRTC belongs to */ @@ -48,6 +52,10 @@ struct rcar_du_crtc { struct drm_pending_vblank_event *event; wait_queue_head_t flip_wait; + spinlock_t vblank_lock; + wait_queue_head_t vblank_wait; + unsigned int vblank_count; + unsigned int outputs; struct rcar_du_group *group; -- 1.9.1

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] [PATCH 4.9.y 1/2] drm: rcar-du: Use the VBK interrupt for vblank events

by Nhan Nguyen

From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> commit cbbb90b0c084d7dfb2ed8e3fecf8df200fbdd2a0 upstream. When implementing support for interlaced modes, the driver switched from reporting vblank events on the vertical blanking (VBK) interrupt to the frame end interrupt (FRM). This incorrectly divided the reported refresh rate by two. Fix it by moving back to the VBK interrupt. Fixes: 906eff7fcada ("drm: rcar-du: Implement support for interlaced modes") Cc: stable(a)vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas(a)ideasonboard.com> Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index a2ec6d8..848f7f2 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -551,7 +551,7 @@ static irqreturn_t rcar_du_crtc_irq(int irq, void *arg) status = rcar_du_crtc_read(rcrtc, DSSR); rcar_du_crtc_write(rcrtc, DSRCR, status & DSRCR_MASK); - if (status & DSSR_FRM) { + if (status & DSSR_VBK) { drm_crtc_handle_vblank(&rcrtc->crtc); rcar_du_crtc_finish_page_flip(rcrtc); ret = IRQ_HANDLED; -- 1.9.1

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] [PATCH 4.9.y 3/3] ASoC: rsnd: avoid duplicate free_irq()

by Nhan Nguyen

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> commit e0936c3471a8411a5df327641fa3ffe12a2fb07b upstream. commit 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on Parent SSI") fixed Parent SSI duplicate free_irq(). But on Renesas Sound, not only Parent SSI but also Multi SSI have same issue. This patch avoid duplicate free_irq() if it was not pure SSI. Fixes: 1f8754d4daea5f ("ASoC: rsnd: don't call free_irq() on Parent SSI") Cc: stable(a)vger.kernel.org Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> --- sound/soc/sh/rcar/ssi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 9472d99..3454cba 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -694,12 +694,12 @@ static int rsnd_ssi_dma_remove(struct rsnd_mod *mod, struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); - struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io); + struct rsnd_mod *pure_ssi_mod = rsnd_io_to_mod_ssi(io); struct device *dev = rsnd_priv_to_dev(priv); int irq = ssi->irq; - /* Do nothing for SSI parent mod */ - if (ssi_parent_mod == mod) + /* Do nothing if non SSI (= SSI parent, multi SSI) mod */ + if (pure_ssi_mod != mod) return 0; /* PIO will request IRQ again */ -- 1.9.1

7 years, 4 months

1
0
0 0

[Linux-stable-mirror] [PATCH 4.9.y 2/3] ASoC: rsnd: don't call free_irq() on Parent SSI

by Nhan Nguyen

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> commit 1f8754d4daea5f257370a52a30fcb22798c54516 upstream. If SSI uses shared pin, some SSI will be used as parent SSI. Then, normal SSI's remove and Parent SSI's remove (these are same SSI) will be called when unbind or remove timing. In this case, free_irq() will be called twice. This patch solve this issue. Cc: stable(a)vger.kernel.org Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: thongsyho <thong.ho.px(a)rvc.renesas.com> Signed-off-by: Nhan Nguyen <nhan.nguyen.yb(a)renesas.com> --- sound/soc/sh/rcar/ssi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 6cb6db0..9472d99 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -694,9 +694,14 @@ static int rsnd_ssi_dma_remove(struct rsnd_mod *mod, struct rsnd_priv *priv) { struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod); + struct rsnd_mod *ssi_parent_mod = rsnd_io_to_mod_ssip(io); struct device *dev = rsnd_priv_to_dev(priv); int irq = ssi->irq; + /* Do nothing for SSI parent mod */ + if (ssi_parent_mod == mod) + return 0; + /* PIO will request IRQ again */ devm_free_irq(dev, irq, mod); -- 1.9.1

7 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror