- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] [PATCH v3] drm/nouveau: Move irq setup/teardown to pci ctor/dtor

by Lyude Paul

For a while we've been having issues with seemingly random interrupts coming from nvidia cards when resuming them. Originally the fix for this was thought to be just re-arming the MSI interrupt registers right after re-allocating our IRQs, however it seems a lot of what we do is both wrong and not even nessecary. This was made apparent by what appeared to be a regression in the mainline kernel that started introducing suspend/resume issues for nouveau: a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation) After this commit was introduced, we started getting interrupts from the GPU before we actually re-allocated our own IRQ (see references below) and assigned the IRQ handler. Investigating this turned out that the problem was not with the commit, but the fact that nouveau even free/allocates it's irqs before and after suspend/resume. For starters: drivers in the linux kernel haven't had to handle freeing/re-allocating their IRQs during suspend/resume cycles for quite a while now. Nouveau seems to be one of the few drivers left that still does this, despite the fact there's no reason we actually need to since disabling interrupts from the device side should be enough, as the kernel is already smart enough to know to disable host-side interrupts for us before going into suspend. Since we were tearing down our IRQs by hand however, that means there was a short period during resume where interrupts could be received before we re-allocated our IRQ which would lead to us getting an unhandled IRQ. Since we never handle said IRQ and re-arm the interrupt registers, this would cause us to miss all of the interrupts from the GPU and cause our init process to start timing out on anything requiring interrupts. So, since this whole setup/teardown every suspend/resume cycle is useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor functions instead so they're only called at driver load and driver unload. This should fix most of the issues with pending interrupts on resume, along with getting suspend/resume for nouveau to work again. As well, this probably means we can also just remove the msi rearm call inside nvkm_pci_init(). But since our main focus here is to fix suspend/resume before 4.15, we'll save that for a later patch. Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: Karol Herbst <kherbst(a)redhat.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Mike Galbraith <efault(a)gmx.de> Cc: stable(a)vger.kernel.org --- Changes since v2: - Remove teardown, just reuse pci->irq to indicate when we're tearing down the driver drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 44 +++++++++++++++++--------- 1 file changed, 29 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c index deb96de54b00..3b2cad639388 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c @@ -71,6 +71,10 @@ nvkm_pci_intr(int irq, void *arg) struct nvkm_pci *pci = arg; struct nvkm_device *device = pci->subdev.device; bool handled = false; + + if (pci->irq < 0) + return IRQ_HANDLED; + nvkm_mc_intr_unarm(device); if (pci->msi) pci->func->msi_rearm(pci); @@ -84,11 +88,6 @@ nvkm_pci_fini(struct nvkm_subdev *subdev, bool suspend) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci->irq >= 0) { - free_irq(pci->irq, pci); - pci->irq = -1; - } - if (pci->agp.bridge) nvkm_agp_fini(pci); @@ -108,8 +107,20 @@ static int nvkm_pci_oneinit(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci_is_pcie(pci->pdev)) - return nvkm_pcie_oneinit(pci); + struct pci_dev *pdev = pci->pdev; + int ret; + + if (pci_is_pcie(pci->pdev)) { + ret = nvkm_pcie_oneinit(pci); + if (ret) + return ret; + } + + ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); + if (ret) + return ret; + pci->irq = pdev->irq; + return 0; } @@ -117,7 +128,6 @@ static int nvkm_pci_init(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - struct pci_dev *pdev = pci->pdev; int ret; if (pci->agp.bridge) { @@ -131,28 +141,32 @@ nvkm_pci_init(struct nvkm_subdev *subdev) if (pci->func->init) pci->func->init(pci); - ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); - if (ret) - return ret; - - pci->irq = pdev->irq; - /* Ensure MSI interrupts are armed, for the case where there are * already interrupts pending (for whatever reason) at load time. */ if (pci->msi) pci->func->msi_rearm(pci); - return ret; + return 0; } static void * nvkm_pci_dtor(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); + int irq; + nvkm_agp_dtor(pci); + + if (pci->irq >= 0) { + irq = pci->irq; + pci->irq = -1; + free_irq(irq, pci); + } + if (pci->msi) pci_disable_msi(pci->pdev); + return nvkm_pci(subdev); } -- 2.14.3

7 years, 5 months

3
2
0 0

[Linux-stable-mirror] [PATCH for 4.15] orangefs: fix deadlock; do not write i_size in read_iter

by Martin Brandenburg

After do_readv_writev, the inode cache is invalidated anyway, so i_size will never be read. It will be fetched from the server which will also know about updates from other machines. Fixes deadlock on 32-bit SMP. See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2 Signed-off-by: Martin Brandenburg <martin(a)omnibond.com> Cc: Al Viro <viro(a)zeniv.linux.org.uk> Cc: Mike Marshall <hubcap(a)omnibond.com> Cc: stable(a)vger.kernel.org --- fs/orangefs/file.c | 7 ++----- fs/orangefs/orangefs-kernel.h | 11 ----------- 2 files changed, 2 insertions(+), 16 deletions(-) diff --git a/fs/orangefs/file.c b/fs/orangefs/file.c index 1668fd645c45..0d228cd087e6 100644 --- a/fs/orangefs/file.c +++ b/fs/orangefs/file.c @@ -452,7 +452,7 @@ ssize_t orangefs_inode_read(struct inode *inode, static ssize_t orangefs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter) { struct file *file = iocb->ki_filp; - loff_t pos = *(&iocb->ki_pos); + loff_t pos = iocb->ki_pos; ssize_t rc = 0; BUG_ON(iocb->private); @@ -492,9 +492,6 @@ static ssize_t orangefs_file_write_iter(struct kiocb *iocb, struct iov_iter *ite } } - if (file->f_pos > i_size_read(file->f_mapping->host)) - orangefs_i_size_write(file->f_mapping->host, file->f_pos); - rc = generic_write_checks(iocb, iter); if (rc <= 0) { @@ -508,7 +505,7 @@ static ssize_t orangefs_file_write_iter(struct kiocb *iocb, struct iov_iter *ite * pos to the end of the file, so we will wait till now to set * pos... */ - pos = *(&iocb->ki_pos); + pos = iocb->ki_pos; rc = do_readv_writev(ORANGEFS_IO_WRITE, file, diff --git a/fs/orangefs/orangefs-kernel.h b/fs/orangefs/orangefs-kernel.h index 97adf7d100b5..2595453fe737 100644 --- a/fs/orangefs/orangefs-kernel.h +++ b/fs/orangefs/orangefs-kernel.h @@ -533,17 +533,6 @@ do { \ sys_attr.mask = ORANGEFS_ATTR_SYS_ALL_SETABLE; \ } while (0) -static inline void orangefs_i_size_write(struct inode *inode, loff_t i_size) -{ -#if BITS_PER_LONG == 32 && defined(CONFIG_SMP) - inode_lock(inode); -#endif - i_size_write(inode, i_size); -#if BITS_PER_LONG == 32 && defined(CONFIG_SMP) - inode_unlock(inode); -#endif -} - static inline void orangefs_set_timeout(struct dentry *dentry) { unsigned long time = jiffies + orangefs_dcache_timeout_msecs*HZ/1000; -- 2.14.2

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] [to-be-updated] lib-strscpy-remove-word-at-a-time-optimization.patch removed from -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: lib/strscpy: remove word-at-a-time optimization. has been removed from the -mm tree. Its filename was lib-strscpy-remove-word-at-a-time-optimization.patch This patch was dropped because an updated version will be merged ------------------------------------------------------ From: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Subject: lib/strscpy: remove word-at-a-time optimization. strscpy() performs the word-at-a-time optimistic reads. So it may may access the memory past the end of the object, which is perfectly fine since strscpy() doesn't use that (past-the-end) data and makes sure the optimistic read won't cross a page boundary. But KASAN doesn't know anything about that so it will complain. There are several possible ways to address this issue, but none are perfect. See https://lkml.kernel.org/r/9f0a9cf6-51f7-cd1f-5dc6-6d510a7b8ec4@virtuozzo.com It seems the best solution is to simply disable word-at-a-time optimization. My trivial testing shows that byte-at-a-time could be up to x4.3 times slower than word-at-a-time. It may seems like a lot, but it's actually ~1.2e-10 sec per symbol vs ~4.8e-10 sec per symbol on modern hardware. And we don't use strscpy() in a performance critical paths to copy large amounts of data, so it shouldn't matter anyway. Link: http://lkml.kernel.org/r/20180109163745.3692-1-aryabinin@virtuozzo.com Fixes: 30035e45753b7 ("string: provide strscpy()") Signed-off-by: Andrey Ryabinin <aryabinin(a)virtuozzo.com> Cc: Kees Cook <keescook(a)chromium.org> Cc: Eryu Guan <eguan(a)redhat.com> Cc: Alexander Potapenko <glider(a)google.com> Cc: Chris Metcalf <metcalf(a)alum.mit.edu> Cc: David Laight <David.Laight(a)ACULAB.COM> Cc: Dmitry Vyukov <dvyukov(a)google.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- lib/string.c | 38 -------------------------------------- 1 file changed, 38 deletions(-) diff -puN lib/string.c~lib-strscpy-remove-word-at-a-time-optimization lib/string.c --- a/lib/string.c~lib-strscpy-remove-word-at-a-time-optimization +++ a/lib/string.c @@ -29,7 +29,6 @@ #include <linux/errno.h> #include <asm/byteorder.h> -#include <asm/word-at-a-time.h> #include <asm/page.h> #ifndef __HAVE_ARCH_STRNCASECMP @@ -177,45 +176,8 @@ EXPORT_SYMBOL(strlcpy); */ ssize_t strscpy(char *dest, const char *src, size_t count) { - const struct word_at_a_time constants = WORD_AT_A_TIME_CONSTANTS; - size_t max = count; long res = 0; - if (count == 0) - return -E2BIG; - -#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS - /* - * If src is unaligned, don't cross a page boundary, - * since we don't know if the next page is mapped. - */ - if ((long)src & (sizeof(long) - 1)) { - size_t limit = PAGE_SIZE - ((long)src & (PAGE_SIZE - 1)); - if (limit < max) - max = limit; - } -#else - /* If src or dest is unaligned, don't do word-at-a-time. */ - if (((long) dest | (long) src) & (sizeof(long) - 1)) - max = 0; -#endif - - while (max >= sizeof(unsigned long)) { - unsigned long c, data; - - c = *(unsigned long *)(src+res); - if (has_zero(c, &data, &constants)) { - data = prep_zero_mask(c, data, &constants); - data = create_zero_mask(data); - *(unsigned long *)(dest+res) = c & zero_bytemask(data); - return res + find_zero(data); - } - *(unsigned long *)(dest+res) = c; - res += sizeof(unsigned long); - count -= sizeof(unsigned long); - max -= sizeof(unsigned long); - } - while (count) { char c; _ Patches currently in -mm which might be from aryabinin(a)virtuozzo.com are mm-memcontrolc-try-harder-to-decrease-limit_in_bytes.patch kasan-makefile-support-llvm-style-asan-parameters.patch lib-ubsan-add-type-mismatch-handler-for-new-gcc-clang.patch lib-ubsan-remove-returns-nonnull-attribute-checks.patch lib-ubsan-remove-returns-nonnull-attribute-checks-fix.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] [PATCH v2] drm/nouveau: Move irq setup/teardown to pci ctor/dtor

by Lyude Paul

For a while we've been having issues with seemingly random interrupts coming from nvidia cards when resuming them. Originally the fix for this was thought to be just re-arming the MSI interrupt registers right after re-allocating our IRQs, however it seems a lot of what we do is both wrong and not even nessecary. This was made apparent by what appeared to be a regression in the mainline kernel that started introducing suspend/resume issues for nouveau: a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation) After this commit was introduced, we started getting interrupts from the GPU before we actually re-allocated our own IRQ (see references below) and assigned the IRQ handler. Investigating this turned out that the problem was not with the commit, but the fact that nouveau even free/allocates it's irqs before and after suspend/resume. For starters: drivers in the linux kernel haven't had to handle freeing/re-allocating their IRQs during suspend/resume cycles for quite a while now. Nouveau seems to be one of the few drivers left that still does this, despite the fact there's no reason we actually need to since disabling interrupts from the device side should be enough, as the kernel is already smart enough to know to disable host-side interrupts for us before going into suspend. Since we were tearing down our IRQs by hand however, that means there was a short period during resume where interrupts could be received before we re-allocated our IRQ which would lead to us getting an unhandled IRQ. Since we never handle said IRQ and re-arm the interrupt registers, this would cause us to miss all of the interrupts from the GPU and cause our init process to start timing out on anything requiring interrupts. So, since this whole setup/teardown every suspend/resume cycle is useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor functions instead so they're only called at driver load and driver unload. This should fix most of the issues with pending interrupts on resume, along with getting suspend/resume for nouveau to work again. As well, this probably means we can also just remove the msi rearm call inside nvkm_pci_init(). But since our main focus here is to fix suspend/resume before 4.15, we'll save that for a later patch. Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: Karol Herbst <kherbst(a)redhat.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Mike Galbraith <efault(a)gmx.de> Cc: stable(a)vger.kernel.org --- Changes since v1: - Fix small typo in commit message No functional changes drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 43 +++++++++++++++-------- 2 files changed, 29 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h index 23803cc859fd..378bfc8d5fa8 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h @@ -31,6 +31,7 @@ struct nvkm_pci { } pcie; bool msi; + bool teardown; }; u32 nvkm_pci_rd32(struct nvkm_pci *, u16 addr); diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c index deb96de54b00..4e020f05c99f 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c @@ -71,6 +71,10 @@ nvkm_pci_intr(int irq, void *arg) struct nvkm_pci *pci = arg; struct nvkm_device *device = pci->subdev.device; bool handled = false; + + if (pci->teardown) + return IRQ_HANDLED; + nvkm_mc_intr_unarm(device); if (pci->msi) pci->func->msi_rearm(pci); @@ -84,11 +88,6 @@ nvkm_pci_fini(struct nvkm_subdev *subdev, bool suspend) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci->irq >= 0) { - free_irq(pci->irq, pci); - pci->irq = -1; - } - if (pci->agp.bridge) nvkm_agp_fini(pci); @@ -108,8 +107,20 @@ static int nvkm_pci_oneinit(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci_is_pcie(pci->pdev)) - return nvkm_pcie_oneinit(pci); + struct pci_dev *pdev = pci->pdev; + int ret; + + if (pci_is_pcie(pci->pdev)) { + ret = nvkm_pcie_oneinit(pci); + if (ret) + return ret; + } + + ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); + if (ret) + return ret; + pci->irq = pdev->irq; + return 0; } @@ -117,7 +128,6 @@ static int nvkm_pci_init(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - struct pci_dev *pdev = pci->pdev; int ret; if (pci->agp.bridge) { @@ -131,28 +141,30 @@ nvkm_pci_init(struct nvkm_subdev *subdev) if (pci->func->init) pci->func->init(pci); - ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); - if (ret) - return ret; - - pci->irq = pdev->irq; - /* Ensure MSI interrupts are armed, for the case where there are * already interrupts pending (for whatever reason) at load time. */ if (pci->msi) pci->func->msi_rearm(pci); - return ret; + return 0; } static void * nvkm_pci_dtor(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); + nvkm_agp_dtor(pci); + + if (pci->irq >= 0) { + pci->teardown = true; + free_irq(pci->irq, pci); + } + if (pci->msi) pci_disable_msi(pci->pdev); + return nvkm_pci(subdev); } @@ -177,6 +189,7 @@ nvkm_pci_new_(const struct nvkm_pci_func *func, struct nvkm_device *device, pci->func = func; pci->pdev = device->func->pci(device)->pdev; pci->irq = -1; + pci->teardown = false; pci->pcie.speed = -1; pci->pcie.width = -1; -- 2.14.3

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] [PATCH] drm/nouveau: Move irq setup/teardown to pci ctor/dtor

by Lyude Paul

For a while we've been having issues with seemingly random interrupts coming from nvidia cards when resuming them. Originally the fix for this was thought to be just re-arming the MSI interrupt registers right after re-allocating our IRQs, however it seems a lot of what we do is both wrong and not even nessecary. This was made apparent by what appeared to be a regression in the mainline kernel that started introducing suspend/resume issues for nouveau: a0c9259dc4e1 (irq/matrix: Spread interrupts on allocation) After this commit was introduced, we started getting interrupts from the GPU before we actually re-allocated our own IRQ (see references below) and assigned the IRQ handler. Investigating this turned out that the problem was not with the commit, but the fact that nouveau even free/allocates it's irqs before and after suspend/resume. For starters: drivers in the linux kernel haven't had to handle freeing/re-allocating their IRQs during suspend/resume cycles for quite a while now. Nouveau seems to be one of the few drivers left that still does this, despite the fact there's no reason we actually need to since disabling interrupts from the device side should be enough, as the kernel is already smart enough to know to disable host-side interrupts for us before going into suspend. Since we were tearing down our IRQs by hand however, that means there was a short period during resume where interrupts could be received before we re-allocated our IRQ which would lead to us getting an unhandled IRQ. Since we never handle said IRQ and re-arm the interrupt registers, this would cause us to miss all of the interrupts from the GPU and cause our init process to start timing out on anything requiring interrupts. So, since this whole setup/teardown every suspend/resume cycle is useless anyway, move irq setup/teardown into the pci subdev's ctor/dtor functions instead so they're only called at driver load and driver unload. This should fix most of the issues with pending interrupts on resume, along with getting suspend/resume for nouveau to work again. As well, this probably means we can also just remove the msi rearm call inside nvkm_pci_init(). But since our main focus here is to fix suspend/resume before 4.16, we'll save that for a later patch. Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: Karol Herbst <kherbst(a)redhat.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Mike Galbraith <efault(a)gmx.de> Cc: stable(a)vger.kernel.org --- drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h | 1 + drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c | 43 +++++++++++++++-------- 2 files changed, 29 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h b/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h index 23803cc859fd..378bfc8d5fa8 100644 --- a/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h +++ b/drivers/gpu/drm/nouveau/include/nvkm/subdev/pci.h @@ -31,6 +31,7 @@ struct nvkm_pci { } pcie; bool msi; + bool teardown; }; u32 nvkm_pci_rd32(struct nvkm_pci *, u16 addr); diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c index deb96de54b00..4e020f05c99f 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/pci/base.c @@ -71,6 +71,10 @@ nvkm_pci_intr(int irq, void *arg) struct nvkm_pci *pci = arg; struct nvkm_device *device = pci->subdev.device; bool handled = false; + + if (pci->teardown) + return IRQ_HANDLED; + nvkm_mc_intr_unarm(device); if (pci->msi) pci->func->msi_rearm(pci); @@ -84,11 +88,6 @@ nvkm_pci_fini(struct nvkm_subdev *subdev, bool suspend) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci->irq >= 0) { - free_irq(pci->irq, pci); - pci->irq = -1; - } - if (pci->agp.bridge) nvkm_agp_fini(pci); @@ -108,8 +107,20 @@ static int nvkm_pci_oneinit(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - if (pci_is_pcie(pci->pdev)) - return nvkm_pcie_oneinit(pci); + struct pci_dev *pdev = pci->pdev; + int ret; + + if (pci_is_pcie(pci->pdev)) { + ret = nvkm_pcie_oneinit(pci); + if (ret) + return ret; + } + + ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); + if (ret) + return ret; + pci->irq = pdev->irq; + return 0; } @@ -117,7 +128,6 @@ static int nvkm_pci_init(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); - struct pci_dev *pdev = pci->pdev; int ret; if (pci->agp.bridge) { @@ -131,28 +141,30 @@ nvkm_pci_init(struct nvkm_subdev *subdev) if (pci->func->init) pci->func->init(pci); - ret = request_irq(pdev->irq, nvkm_pci_intr, IRQF_SHARED, "nvkm", pci); - if (ret) - return ret; - - pci->irq = pdev->irq; - /* Ensure MSI interrupts are armed, for the case where there are * already interrupts pending (for whatever reason) at load time. */ if (pci->msi) pci->func->msi_rearm(pci); - return ret; + return 0; } static void * nvkm_pci_dtor(struct nvkm_subdev *subdev) { struct nvkm_pci *pci = nvkm_pci(subdev); + nvkm_agp_dtor(pci); + + if (pci->irq >= 0) { + pci->teardown = true; + free_irq(pci->irq, pci); + } + if (pci->msi) pci_disable_msi(pci->pdev); + return nvkm_pci(subdev); } @@ -177,6 +189,7 @@ nvkm_pci_new_(const struct nvkm_pci_func *func, struct nvkm_device *device, pci->func = func; pci->pdev = device->func->pci(device)->pdev; pci->irq = -1; + pci->teardown = false; pci->pcie.speed = -1; pci->pcie.width = -1; -- 2.14.3

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] [PATCH 4.14 00/89] 4.14.15-stable review

by Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.15 release. There are 89 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know. Responses should be made by Wed Jan 24 08:39:25 UTC 2018. Anything received after that time might be too late. The whole patch series can be found in one patch at: kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.15-rc1.gz or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y and the diffstat can be found below. thanks, greg k-h ------------- Pseudo-Shortlog of commits: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Linux 4.14.15-rc1 Yan Markman <ymarkman(a)marvell.com> net: mvpp2: do not disable GMAC padding Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> mm, page_vma_mapped: Drop faulty pointer arithmetics in check_pte() Tom Lendacky <thomas.lendacky(a)amd.com> x86/mm: Rework wbinvd, hlt operation in stop_this_cpu() Andi Kleen <ak(a)linux.intel.com> x86/retpoline: Optimize inline assembler for vmexit_fill_RSB zhenwei.pi <zhenwei.pi(a)youruncloud.com> x86/pti: Document fix wrong index Masami Hiramatsu <mhiramat(a)kernel.org> kprobes/x86: Disable optimizing on the function jumps to indirect thunk Masami Hiramatsu <mhiramat(a)kernel.org> kprobes/x86: Blacklist indirect thunk functions for kprobes Masami Hiramatsu <mhiramat(a)kernel.org> retpoline: Introduce start/end markers of indirect thunk Thomas Gleixner <tglx(a)linutronix.de> x86/mce: Make machine check speculation protected Marc Zyngier <marc.zyngier(a)arm.com> arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls Punit Agrawal <punit.agrawal(a)arm.com> KVM: arm/arm64: Check pagesize when allocating a hugepage at Stage 2 James Hogan <jhogan(a)kernel.org> MIPS: CM: Drop WARN_ON(vp != 0) Lorenzo Pieralisi <lorenzo.pieralisi(a)arm.com> alpha/PCI: Fix noname IRQ level detection Laura Abbott <labbott(a)redhat.com> x86: Use __nostackprotect for sme_encrypt_kernel Wei Yongjun <weiyongjun1(a)huawei.com> dm crypt: fix error return code in crypt_ctr() Ondrej Kozina <okozina(a)redhat.com> dm crypt: wipe kernel key copy after IV initialization Milan Broz <gmazyland(a)gmail.com> dm crypt: fix crash by adding missing check for auth key size Mikulas Patocka <mpatocka(a)redhat.com> dm integrity: don't store cipher request on the stack Dennis Yang <dennisyang(a)qnap.com> dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6 Joe Thornber <thornber(a)redhat.com> dm btree: fix serious bug in btree_split_beneath() Rob Clark <rclark(a)redhat.com> drm/vmwgfx: fix memory corruption with legacy/sou connectors Sergey Senozhatsky <sergey.senozhatsky.work(a)gmail.com> workqueue: avoid hard lockups in show_workqueue_state() Hannes Reinecke <hare(a)suse.de> scsi: libsas: Disable asynchronous aborts for SATA devices Xinyu Lin <xinyu0123(a)gmail.com> libata: apply MAX_SEC_1024 to all LITEON EP1 series devices Alexey Dobriyan <adobriyan(a)gmail.com> proc: fix coredump vs read /proc/*/stat race Xi Kangjie <imxikangjie(a)gmail.com> scripts/gdb/linux/tasks.py: fix get_thread_info Jeremy Compostella <jeremy.compostella(a)intel.com> i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA Marc Kleine-Budde <mkl(a)pengutronix.de> can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once Marc Kleine-Budde <mkl(a)pengutronix.de> can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once Stephane Grosjean <s.grosjean(a)peak-system.com> can: peak: fix potential bug in packet fragmentation Thomas Petazzoni <thomas.petazzoni(a)free-electrons.com> ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7 Maxime Ripard <maxime.ripard(a)free-electrons.com> ARM: sunxi_defconfig: Enable CMA Gregory CLEMENT <gregory.clement(a)free-electrons.com> ARM64: dts: marvell: armada-cp110: Fix clock resources for various node Arnd Bergmann <arnd(a)arndb.de> phy: work around 'phys' references to usb-nop-xceiv devices Steven Rostedt (VMware) <rostedt(a)goodmis.org> tracing: Fix converting enum's from the map in trace_event_eval_update() Johan Hovold <johan(a)kernel.org> Input: twl4030-vibra - fix sibling-node lookup Johan Hovold <johan(a)kernel.org> Input: twl6040-vibra - fix child-node lookup Johan Hovold <johan(a)kernel.org> Input: 88pm860x-ts - fix child-node lookup Nick Desaulniers <nick.desaulniers(a)gmail.com> Input: synaptics-rmi4 - prevent UAF reported by KASAN Nir Perry <nirperry(a)gmail.com> Input: ALPS - fix multi-touch decoding on SS4 plus touchpads Tom Lendacky <thomas.lendacky(a)amd.com> x86/mm: Encrypt the initrd earlier for BSP microcode update Tero Kristo <t-kristo(a)ti.com> ARM: OMAP3: hwmod_data: add missing module_offs for MMC3 Tom Lendacky <thomas.lendacky(a)amd.com> x86/mm: Prepare sme_encrypt_kernel() for PAGE aligned encryption Tom Lendacky <thomas.lendacky(a)amd.com> x86/mm: Centralize PMD flags in sme_encrypt_kernel() Tom Lendacky <thomas.lendacky(a)amd.com> x86/mm: Use a struct to reduce parameters for SME PGD mapping Tom Lendacky <thomas.lendacky(a)amd.com> x86/mm: Clean up register saving in the __enc_copy() assembly code Thomas Gleixner <tglx(a)linutronix.de> x86/apic/vector: Fix off by one in error path Joe Lawrence <joe.lawrence(a)redhat.com> pipe: avoid round_pipe_size() nr_pages overflow on 32-bit Len Brown <len.brown(a)intel.com> x86/tsc: Fix erroneous TSC rate on Skylake Xeon Len Brown <len.brown(a)intel.com> x86/tsc: Future-proof native_calibrate_tsc() Andi Kleen <ak(a)linux.intel.com> x86/idt: Mark IDT tables __initconst Eric W. Biederman <ebiederm(a)xmission.com> x86/mm/pkeys: Fix fill_sig_info_pkey Thomas Gleixner <tglx(a)linutronix.de> x86/intel_rdt/cqm: Prevent use after free Andi Kleen <ak(a)linux.intel.com> module: Add retpoline tag to VERMAGIC Paolo Bonzini <pbonzini(a)redhat.com> x86/cpufeature: Move processor tracing out of scattered features Josh Poimboeuf <jpoimboe(a)redhat.com> objtool: Improve error message for bad file argument Tom Lendacky <thomas.lendacky(a)amd.com> x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macros David Woodhouse <dwmw(a)amazon.co.uk> x86/retpoline: Fill RSB on context switch for affected CPUs Andrey Ryabinin <aryabinin(a)virtuozzo.com> x86/kasan: Panic if there is not enough memory to boot Benoît Thébaudeau <benoit.thebaudeau.dev(a)gmail.com> mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clock Josh Poimboeuf <jpoimboe(a)redhat.com> objtool: Fix seg fault with gold linker Josh Snyder <joshs(a)netflix.com> delayacct: Account blkio completion on the correct task Sagi Grimberg <sagi(a)grimberg.me> iser-target: Fix possible use-after-free in connection establishment error Eric Biggers <ebiggers(a)google.com> af_key: fix buffer overread in parse_exthdrs() Eric Biggers <ebiggers(a)google.com> af_key: fix buffer overread in verify_address_len() Thomas Gleixner <tglx(a)linutronix.de> timers: Unconditionally check deferrable base Leon Romanovsky <leonro(a)mellanox.com> RDMA/mlx5: Fix out-of-bound access while querying AH Dan Carpenter <dan.carpenter(a)oracle.com> IB/hfi1: Prevent a NULL dereference Takashi Iwai <tiwai(a)suse.de> ALSA: hda - Apply the existing quirk to iMac 14,1 Takashi Iwai <tiwai(a)suse.de> ALSA: hda - Apply headphone noise quirk for another Dell XPS 13 variant Takashi Iwai <tiwai(a)suse.de> ALSA: pcm: Remove yet superfluous WARN_ON() Takashi Iwai <tiwai(a)suse.de> ALSA: seq: Make ioctls race-free Li Jinyue <lijinyue(a)huawei.com> futex: Prevent overflow by strengthen input validation Peter Zijlstra <peterz(a)infradead.org> futex: Avoid violating the 10th rule of futex Oliver O'Halloran <oohall(a)gmail.com> powerpc/powernv: Check device-tree for RFI flush settings Michael Neuling <mikey(a)neuling.org> powerpc/pseries: Query hypervisor for RFI flush settings Michael Ellerman <mpe(a)ellerman.id.au> powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti Michael Ellerman <mpe(a)ellerman.id.au> powerpc/64s: Add support for RFI flush of L1-D cache Nicholas Piggin <npiggin(a)gmail.com> powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL Nicholas Piggin <npiggin(a)gmail.com> powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL Nicholas Piggin <npiggin(a)gmail.com> powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL Nicholas Piggin <npiggin(a)gmail.com> powerpc/64s: Simple RFI macro conversions Nicholas Piggin <npiggin(a)gmail.com> powerpc/64: Add macros for annotating the destination of rfid/hrfid Michael Neuling <mikey(a)neuling.org> powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper Simon Ser <contact(a)emersion.fr> objtool: Fix seg fault caused by missing parameter Lukas Bulwahn <lukas.bulwahn(a)gmail.com> objtool: Fix Clang enum conversion warning Simon Ser <contact(a)emersion.fr> objtool: Fix seg fault with clang-compiled objects Rob Clark <robdclark(a)gmail.com> drm/nouveau/disp/gf119: add missing drive vfunc ptr Andrew Morton <akpm(a)linux-foundation.org> tools/objtool/Makefile: don't assume sync-check.sh is executable ------------- Diffstat: Documentation/x86/pti.txt | 2 +- Makefile | 4 +- arch/alpha/kernel/sys_sio.c | 35 +- arch/arm/boot/dts/kirkwood-openblocks_a7.dts | 10 +- arch/arm/configs/sunxi_defconfig | 2 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 1 + .../boot/dts/marvell/armada-cp110-master.dtsi | 13 +- .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 9 +- arch/arm64/kvm/handle_exit.c | 4 +- arch/mips/kernel/mips-cm.c | 1 - arch/powerpc/include/asm/exception-64e.h | 6 + arch/powerpc/include/asm/exception-64s.h | 57 +++- arch/powerpc/include/asm/feature-fixups.h | 13 + arch/powerpc/include/asm/hvcall.h | 17 + arch/powerpc/include/asm/paca.h | 10 + arch/powerpc/include/asm/plpar_wrappers.h | 14 + arch/powerpc/include/asm/setup.h | 13 + arch/powerpc/kernel/asm-offsets.c | 5 + arch/powerpc/kernel/entry_64.S | 44 ++- arch/powerpc/kernel/exceptions-64s.S | 135 +++++++- arch/powerpc/kernel/setup_64.c | 101 ++++++ arch/powerpc/kernel/vmlinux.lds.S | 9 + arch/powerpc/kvm/book3s_hv_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_rmhandlers.S | 7 +- arch/powerpc/kvm/book3s_segment.S | 4 +- arch/powerpc/lib/feature-fixups.c | 41 +++ arch/powerpc/platforms/powernv/setup.c | 49 +++ arch/powerpc/platforms/pseries/setup.c | 35 ++ arch/x86/entry/entry_32.S | 11 + arch/x86/entry/entry_64.S | 13 +- arch/x86/include/asm/cpufeatures.h | 3 +- arch/x86/include/asm/mem_encrypt.h | 4 +- arch/x86/include/asm/nospec-branch.h | 16 +- arch/x86/include/asm/traps.h | 1 + arch/x86/kernel/apic/vector.c | 7 +- arch/x86/kernel/cpu/bugs.c | 36 +++ arch/x86/kernel/cpu/intel_rdt.c | 8 +- arch/x86/kernel/cpu/mcheck/mce.c | 5 + arch/x86/kernel/cpu/scattered.c | 1 - arch/x86/kernel/head64.c | 4 +- arch/x86/kernel/idt.c | 12 +- arch/x86/kernel/kprobes/opt.c | 23 +- arch/x86/kernel/process.c | 25 +- arch/x86/kernel/setup.c | 8 - arch/x86/kernel/tsc.c | 3 +- arch/x86/kernel/vmlinux.lds.S | 6 + arch/x86/lib/retpoline.S | 5 +- arch/x86/mm/fault.c | 7 +- arch/x86/mm/kasan_init_64.c | 24 +- arch/x86/mm/mem_encrypt.c | 356 +++++++++++++++------ arch/x86/mm/mem_encrypt_boot.S | 80 ++--- drivers/ata/libata-core.c | 1 + .../gpu/drm/nouveau/nvkm/engine/disp/sorgf119.c | 1 + drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 4 +- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 4 +- drivers/i2c/i2c-core-smbus.c | 13 +- drivers/infiniband/hw/hfi1/file_ops.c | 4 +- drivers/infiniband/hw/mlx5/qp.c | 7 +- drivers/infiniband/ulp/isert/ib_isert.c | 1 + drivers/input/misc/twl4030-vibra.c | 6 +- drivers/input/misc/twl6040-vibra.c | 3 +- drivers/input/mouse/alps.c | 23 +- drivers/input/mouse/alps.h | 10 +- drivers/input/rmi4/rmi_driver.c | 4 +- drivers/input/touchscreen/88pm860x-ts.c | 16 +- drivers/md/dm-crypt.c | 20 +- drivers/md/dm-integrity.c | 49 ++- drivers/md/dm-thin-metadata.c | 6 +- drivers/md/persistent-data/dm-btree.c | 19 +- drivers/mmc/host/sdhci-esdhc-imx.c | 14 + drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 21 +- drivers/net/ethernet/marvell/mvpp2.c | 9 - drivers/phy/phy-core.c | 4 + drivers/scsi/libsas/sas_scsi_host.c | 17 +- fs/pipe.c | 17 +- fs/proc/array.c | 7 +- include/linux/delayacct.h | 8 +- include/linux/swapops.h | 21 ++ include/linux/vermagic.h | 8 +- kernel/delayacct.c | 42 ++- kernel/futex.c | 86 ++++- kernel/locking/rtmutex.c | 26 +- kernel/locking/rtmutex_common.h | 1 + kernel/sched/core.c | 6 +- kernel/time/timer.c | 2 +- kernel/trace/trace_events.c | 16 +- kernel/workqueue.c | 13 + mm/page_vma_mapped.c | 63 ++-- net/can/af_can.c | 36 +-- net/key/af_key.c | 8 + scripts/Makefile.build | 14 +- scripts/gdb/linux/tasks.py | 2 + sound/core/pcm_lib.c | 1 - sound/core/seq/seq_clientmgr.c | 3 + sound/core/seq/seq_clientmgr.h | 1 + sound/pci/hda/patch_cirrus.c | 1 + sound/pci/hda/patch_realtek.c | 1 + tools/objtool/Makefile | 2 +- tools/objtool/arch/x86/decode.c | 2 +- tools/objtool/builtin-orc.c | 4 +- tools/objtool/elf.c | 4 +- tools/objtool/orc_gen.c | 2 + virt/kvm/arm/mmu.c | 2 +- 103 files changed, 1514 insertions(+), 447 deletions(-)

7 years, 5 months

9
102
0 0

[Linux-stable-mirror] [PATCH v2 2/2] xen: add acpi_arch_get_root_pointer() for pvh guests

by Juergen Gross

Add acpi_arch_get_root_pointer() for Xen PVH guests to communicate the address of the RSDP table given to the kernel via Xen start info. This makes the kernel boot again in PVH mode after on recent Xen the RSDP was moved to higher addresses. So up to that change it was pure luck that the legacy method to locate the RSDP was working when running as PVH mode. Cc: <stable(a)vger.kernel.org> # 4.11 Signed-off-by: Juergen Gross <jgross(a)suse.com> --- arch/x86/xen/enlighten_pvh.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index 436c4f003e17..f08fd43f2aa2 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -16,15 +16,23 @@ /* * PVH variables. * - * xen_pvh and pvh_bootparams need to live in data segment since they - * are used after startup_{32|64}, which clear .bss, are invoked. + * xen_pvh, pvh_bootparams and pvh_start_info need to live in data segment + * since they are used after startup_{32|64}, which clear .bss, are invoked. */ bool xen_pvh __attribute__((section(".data"))) = 0; struct boot_params pvh_bootparams __attribute__((section(".data"))); +struct hvm_start_info pvh_start_info __attribute__((section(".data"))); -struct hvm_start_info pvh_start_info; unsigned int pvh_start_info_sz = sizeof(pvh_start_info); +acpi_physical_address acpi_arch_get_root_pointer(void) +{ + if (xen_pvh) + return pvh_start_info.rsdp_paddr; + + return 0; +} + static void __init init_pvh_bootparams(void) { struct xen_memory_map memmap; -- 2.13.6

7 years, 5 months

2
1
0 0

[Linux-stable-mirror] [PATCH 2/2] xen: add acpi_arch_get_root_pointer() for pvh guests

by Juergen Gross

Add acpi_arch_get_root_pointer() for Xen PVH guests to communicate the address of the RSDP table given to the kernel via Xen start info. This makes the kernel boot again in PVH mode after on recent Xen the RSDP was moved to higher addresses. So up to that change it was pure luck that the legacy method to locate the RSDP was working when running as PVH mode. Cc: <stable(a)vger.kernel.org> # 4.11 Signed-off-by: Juergen Gross <jgross(a)suse.com> --- arch/x86/xen/enlighten_pvh.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/enlighten_pvh.c b/arch/x86/xen/enlighten_pvh.c index 436c4f003e17..9a5c3a7fe673 100644 --- a/arch/x86/xen/enlighten_pvh.c +++ b/arch/x86/xen/enlighten_pvh.c @@ -16,15 +16,24 @@ /* * PVH variables. * - * xen_pvh and pvh_bootparams need to live in data segment since they - * are used after startup_{32|64}, which clear .bss, are invoked. + * xen_pvh, pvh_bootparams and pvh_start_info need to live in data segment + * since they are used after startup_{32|64}, which clear .bss, are invoked. */ bool xen_pvh __attribute__((section(".data"))) = 0; struct boot_params pvh_bootparams __attribute__((section(".data"))); +struct hvm_start_info pvh_start_info __attribute__((section(".data"))); -struct hvm_start_info pvh_start_info; unsigned int pvh_start_info_sz = sizeof(pvh_start_info); +acpi_physical_address acpi_arch_get_root_pointer(void) +{ + if (xen_pvh) + return pvh_start_info.rsdp_paddr; + + return 0; +} +EXPORT_SYMBOL_GPL(acpi_arch_get_root_pointer); + static void __init init_pvh_bootparams(void) { struct xen_memory_map memmap; -- 2.13.6

7 years, 5 months

2
5
0 0

[Linux-stable-mirror] patch "android: binder: use VM_ALLOC to get vm area" added to char-misc-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled android: binder: use VM_ALLOC to get vm area to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From aac6830ec1cb681544212838911cdc57f2638216 Mon Sep 17 00:00:00 2001 From: Ganesh Mahendran <opensource.ganesh(a)gmail.com> Date: Wed, 10 Jan 2018 10:49:05 +0800 Subject: android: binder: use VM_ALLOC to get vm area VM_IOREMAP is used to access hardware through a mechanism called I/O mapped memory. Android binder is a IPC machanism which will not access I/O memory. And VM_IOREMAP has alignment requiement which may not needed in binder. __get_vm_area_node() { ... if (flags & VM_IOREMAP) align = 1ul << clamp_t(int, fls_long(size), PAGE_SHIFT, IOREMAP_MAX_ORDER); ... } This patch will save some kernel vm area, especially for 32bit os. In 32bit OS, kernel vm area is only 240MB. We may got below error when launching a app: <3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12 <3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12 Signed-off-by: Ganesh Mahendran <opensource.ganesh(a)gmail.com> Acked-by: Martijn Coenen <maco(a)android.com> Acked-by: Todd Kjos <tkjos(a)google.com> Cc: stable <stable(a)vger.kernel.org> ---- V3: update comments V2: update comments Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/android/binder_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index 07b866afee54..5a426c877dfb 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -670,7 +670,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc, goto err_already_mapped; } - area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP); + area = get_vm_area(vma->vm_end - vma->vm_start, VM_ALLOC); if (area == NULL) { ret = -ENOMEM; failure_string = "get_vm_area"; -- 2.16.1

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] patch "USB: serial: pl2303: new device id for Chilitag" added to usb-next

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: pl2303: new device id for Chilitag to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-next branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will also be merged in the next major kernel release during the merge window. If you have any questions about this process, please let me know. >From d08dd3f3dd2ae351b793fc5b76abdbf0fd317b12 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Date: Thu, 25 Jan 2018 09:48:55 +0100 Subject: USB: serial: pl2303: new device id for Chilitag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by: "Chu.Mike [朱堅宜]" <Mike-Chu(a)prolific.com.tw> Cc: stable <stable(a)vger.kernel.org> Acked-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/pl2303.c | 1 + drivers/usb/serial/pl2303.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 57ae832a49ff..46dd09da2434 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -38,6 +38,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index f98fd84890de..fcd72396a7b6 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -12,6 +12,7 @@ #define PL2303_PRODUCT_ID_DCU11 0x1234 #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 +#define PL2303_PRODUCT_ID_CHILITAG 0xaaa8 #define PL2303_PRODUCT_ID_ALDIGA 0x0611 #define PL2303_PRODUCT_ID_MMX 0x0612 #define PL2303_PRODUCT_ID_GPRS 0x0609 -- 2.16.1

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror