- Linux-stable-mirror - lists.linaro.org

[Linux-stable-mirror] [PATCH v2] ASoC: sun8i-codec: Set the BCLK divider

by Maxime Ripard

While the current code was reporting to be able to work in master mode, it failed to do so because the BCLK divider wasn't programmed, meaning that the BCLK would run at the PLL's frequency no matter the sample rate. It was obviously a bit too fast. Add support to retrieve the divider to use, and set it. Since our PLL is not always able to generate a perfect multiple of the sample rate, we'll have to choose the closest divider that matches our setup. Fixes: 36c684936fae ("ASoC: Add sun8i digital audio codec") Cc: <stable(a)vger.kernel.org> Reviewed-by: Chen-Yu Tsai <wens(a)csie.org> Signed-off-by: Maxime Ripard <maxime.ripard(a)free-electrons.com> --- Changes from v1: - Hardcoded the bit width to remain consistent with the rest of the driver --- sound/soc/sunxi/sun8i-codec.c | 51 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c index c2ceca485d6a..7a312168f864 100644 --- a/sound/soc/sunxi/sun8i-codec.c +++ b/sound/soc/sunxi/sun8i-codec.c @@ -73,6 +73,7 @@ #define SUN8I_SYS_SR_CTRL_AIF2_FS_MASK GENMASK(11, 8) #define SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK GENMASK(5, 4) #define SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK GENMASK(8, 6) +#define SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK GENMASK(12, 9) struct sun8i_codec { struct device *dev; @@ -226,12 +227,57 @@ static int sun8i_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) return 0; } +struct sun8i_codec_clk_div { + u8 div; + u8 val; +}; + +static const struct sun8i_codec_clk_div sun8i_codec_bclk_div[] = { + { .div = 1, .val = 0 }, + { .div = 2, .val = 1 }, + { .div = 4, .val = 2 }, + { .div = 6, .val = 3 }, + { .div = 8, .val = 4 }, + { .div = 12, .val = 5 }, + { .div = 16, .val = 6 }, + { .div = 24, .val = 7 }, + { .div = 32, .val = 8 }, + { .div = 48, .val = 9 }, + { .div = 64, .val = 10 }, + { .div = 96, .val = 11 }, + { .div = 128, .val = 12 }, + { .div = 192, .val = 13 }, +}; + +static u8 sun8i_codec_get_bclk_div(struct sun8i_codec *scodec, + unsigned int rate, + unsigned int word_size) +{ + unsigned long clk_rate = clk_get_rate(scodec->clk_module); + unsigned int div = clk_rate / rate / word_size / 2; + unsigned int best_val = 0, best_diff = ~0; + int i; + + for (i = 0; i < ARRAY_SIZE(sun8i_codec_bclk_div); i++) { + const struct sun8i_codec_clk_div *bdiv = &sun8i_codec_bclk_div[i]; + unsigned int diff = abs(bdiv->div - div); + + if (diff < best_diff) { + best_diff = diff; + best_val = bdiv->val; + } + } + + return best_val; +} + static int sun8i_codec_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) { struct sun8i_codec *scodec = snd_soc_codec_get_drvdata(dai->codec); int sample_rate; + u8 bclk_div; /* * The CPU DAI handles only a sample of 16 bits. Configure the @@ -241,6 +287,11 @@ static int sun8i_codec_hw_params(struct snd_pcm_substream *substream, SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK, SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_16); + bclk_div = sun8i_codec_get_bclk_div(scodec, params_rate(params), 16); + regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL, + SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK, + bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV); + regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL, SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK, SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_16); -- 2.14.3

7 years, 5 months

2
1
0 0

[Linux-stable-mirror] [GIT PULL] commits for Linux 4.4

by Levin, Alexander (Sasha Levin)

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi Greg, Pleae pull commits for Linux 4.4 . I've sent a review request for all commits over a week ago and all comments were addressed. Thanks, Sasha ===== The following changes since commit c54d0707aa09a824413ebb4195c98bfb9b9e1fc0: Linux 4.4.97 (2017-11-08 10:06:31 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/sashal/linux-stable.git for-greg-4.4-2 for you to fetch changes up to 2f948758f8adbf4e5f78506568f32ae6269a822d: net: dsa: select NET_SWITCHDEV (2017-11-08 15:35:51 -0500) - ---------------------------------------------------------------- Akinobu Mita (2): Input: mpr121 - handle multiple bits change of status register Input: mpr121 - set missing event capability Alison Schofield (1): iio: trigger: free trigger resource correctly David Lechner (2): dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification dt-bindings: Add vendor prefix for LEGO Feras Daoud (1): IB/ipoib: Change list_del to list_del_init in the tx object Gilad Ben-Yossef (1): IPsec: do not ignore crypto err in ah4 input Harninder Rai (1): dt-bindings: clockgen: Add compatible string for LS1012A Jason Gunthorpe (1): PCI: mvebu: Handle changes to the bridge windows while enabled Juergen Gross (1): xen/netback: set default upper limit of tx/rx queues to 8 Julian Wiedmann (1): s390/qeth: issue STARTLAN as first IPA command Lars-Peter Clausen (1): [media] adv7604: Initialize drive strength to default when using DT Laurent Pinchart (1): serial: sh-sci: Fix register offsets for the IRDA serial port Li Zhong (2): KVM: PPC: Book 3S: XICS: correct the real mode ICP rejecting counter crypto: vmx - disable preemption to enable vsx in aes_ctr.c Liping Zhang (1): netfilter: nft_meta: deal with PACKET_LOOPBACK in netdev family Maciej W. Rozycki (1): video: fbdev: pmag-ba-fb: Remove bad `__init' annotation Nate Watterson (1): iommu/arm-smmu-v3: Clear prior settings when updating STEs Noralf TrÃ¸nnes (1): drm: drm_minor_register(): Clean up debugfs on failure Patrick Bruenn (1): ARM: dts: imx53-qsb-common: fix FEC pinmux config Tony Lindgren (1): ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 Valentin Longchamp (1): powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 Vivien Didelot (1): net: dsa: select NET_SWITCHDEV Volodymyr Bendiuga (1): phy: increase size of MII_BUS_ID_SIZE and bus_id William wu (1): usb: hcd: initialize hcd->flags to 0 when rm hcd Documentation/devicetree/bindings/arm/davinci.txt | 4 + .../devicetree/bindings/clock/qoriq-clock.txt | 1 + .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/imx53-qsb-common.dtsi | 20 ++-- arch/arm/configs/omap2plus_defconfig | 1 + arch/powerpc/boot/dts/fsl/kmcoge4.dts | 4 + arch/powerpc/kvm/book3s_hv_rm_xics.c | 5 +- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/crypto/vmx/aes_ctr.c | 6 ++ drivers/gpu/drm/drm_drv.c | 2 +- drivers/iio/trigger/iio-trig-interrupt.c | 8 +- drivers/iio/trigger/iio-trig-sysfs.c | 2 +- drivers/infiniband/ulp/ipoib/ipoib_cm.c | 2 +- drivers/input/keyboard/mpr121_touchkey.c | 24 +++-- drivers/iommu/arm-smmu-v3.c | 10 +- drivers/media/i2c/adv7604.c | 3 + drivers/net/xen-netback/netback.c | 6 +- drivers/pci/host/pci-mvebu.c | 101 ++++++++++++--------- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 21 ++++- drivers/s390/net/qeth_l2_main.c | 15 --- drivers/s390/net/qeth_l3_main.c | 15 --- drivers/staging/iio/trigger/iio-trig-bfin-timer.c | 4 +- drivers/tty/serial/sh-sci.c | 17 ++-- drivers/usb/core/hcd.c | 1 + drivers/video/fbdev/pmag-ba-fb.c | 2 +- include/linux/phy.h | 8 +- net/dsa/Kconfig | 5 +- net/ipv4/ah4.c | 3 + net/netfilter/nft_meta.c | 28 +++++- 30 files changed, 184 insertions(+), 137 deletions(-) -----BEGIN PGP SIGNATURE----- iQIcBAEBCAAGBQJaA2zzAAoJEN6mb/eXdyzcFM0P/iZBjbrfPNDJYW73WHmz1fq0 s4WaAN0yOtt/rnLwBmzy6SohzIcwX8r/P5aJFh4Yyvw0U1X67KtQTZuzL/NM/gs8 iUpCJ5yFmK5+UUlA2aE8qwpBIobuzUvcS3Iy5ZT5j24hLOSPUQ0B7SvLycmZri78 RmvJzEn/f2fozaPDJkvf1YMJOMpf178gOk/XuIiIbaaLLKyfSjPdxm/OgTcmUrfy qYbJxfsI+VznY8bQF2UtBfcqtsS9aXoHQP//OmHXd3q6vvcQFDU/TpCLNP7XxIhM YIR1TGGGzX0uKYN7B93JpSuIBY+AZ4hECo3CTQ1FCszltcWyfaCQy8NrhWZbhwEr gO+v0s4pDCkuVP6sxHUUuQQ/O53cbmSCIZFwFSpB32zsskY6c1Y2ATvFV52Lpb2a M/ALRNJzNj5x/I/esxjgNX4DZ7F7Wql0iVTyAMjRy5SFrLE+/zAI7c/Ma1MVnQeZ PPXj2bdzdJE2UmGE5SwtewHSzVU0u/2UJ+a9FRpR+m36GiVUlmXckaCwCM0s1ein MAA/qWSvOgnWz6Eo8PGdG83nHSRmtiglflsv4/DO4uFKMB8ltcWzsFa8dknkEOag L4pwQZXxhDE62EnYW3gMJowjd6BNEj/ZrBXv9InObCEHsguhPJg5UK+sSL3gosMq +0jIGPSqGfnR7cWycde2 =PAvO -----END PGP SIGNATURE-----

7 years, 5 months

2
1
0 0

[Linux-stable-mirror] Patch "xen/netback: set default upper limit of tx/rx queues to 8" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xen/netback: set default upper limit of tx/rx queues to 8 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Juergen Gross <jgross(a)suse.com> Date: Tue, 10 Jan 2017 14:32:52 +0100 Subject: xen/netback: set default upper limit of tx/rx queues to 8 From: Juergen Gross <jgross(a)suse.com> [ Upstream commit 56dd5af9bc23d0d5d23bb207c477715b4c2216c5 ] The default for the maximum number of tx/rx queues of one interface is the number of cpus of the system today. As each queue pair reserves 512 grant pages this default consumes a ridiculous number of grants for large guests. Limit the queue number to 8 as default. This value can be modified via a module parameter if required. Signed-off-by: Juergen Gross <jgross(a)suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/xen-netback/netback.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -67,6 +67,7 @@ module_param(rx_drain_timeout_msecs, uin unsigned int rx_stall_timeout_msecs = 60000; module_param(rx_stall_timeout_msecs, uint, 0444); +#define MAX_QUEUES_DEFAULT 8 unsigned int xenvif_max_queues; module_param_named(max_queues, xenvif_max_queues, uint, 0644); MODULE_PARM_DESC(max_queues, @@ -2157,11 +2158,12 @@ static int __init netback_init(void) if (!xen_domain()) return -ENODEV; - /* Allow as many queues as there are CPUs if user has not + /* Allow as many queues as there are CPUs but max. 8 if user has not * specified a value. */ if (xenvif_max_queues == 0) - xenvif_max_queues = num_online_cpus(); + xenvif_max_queues = min_t(unsigned int, MAX_QUEUES_DEFAULT, + num_online_cpus()); if (fatal_skb_slots < XEN_NETBK_LEGACY_SLOTS_MAX) { pr_info("fatal_skb_slots too small (%d), bump it to XEN_NETBK_LEGACY_SLOTS_MAX (%d)\n", Patches currently in stable-queue which might be from jgross(a)suse.com are queue-4.4/xen-netback-set-default-upper-limit-of-tx-rx-queues-to-8.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "video: fbdev: pmag-ba-fb: Remove bad `__init' annotation" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video: fbdev: pmag-ba-fb: Remove bad `__init' annotation to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: "Maciej W. Rozycki" <macro(a)linux-mips.org> Date: Mon, 30 Jan 2017 17:39:48 +0100 Subject: video: fbdev: pmag-ba-fb: Remove bad `__init' annotation From: "Maciej W. Rozycki" <macro(a)linux-mips.org> [ Upstream commit 879e5a0df626f39cbb3c61bb90373e56d67012c4 ] Fix: WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor() The function pmagbafb_probe() references the function __init pmagbafb_erase_cursor(). This is often because pmagbafb_probe lacks a __init annotation or the annotation of pmagbafb_erase_cursor is wrong. -- a fallout from a missed update from commit 9625b51350cc ("VIDEO: PMAG-BA: Fix section mismatch") and then commit 48c68c4f1b54 ("Drivers: video: remove __dev* attributes.") Signed-off-by: Maciej W. Rozycki <macro(a)linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/pmag-ba-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/video/fbdev/pmag-ba-fb.c +++ b/drivers/video/fbdev/pmag-ba-fb.c @@ -129,7 +129,7 @@ static struct fb_ops pmagbafb_ops = { /* * Turn the hardware cursor off. */ -static void __init pmagbafb_erase_cursor(struct fb_info *info) +static void pmagbafb_erase_cursor(struct fb_info *info) { struct pmagbafb_par *par = info->par; Patches currently in stable-queue which might be from macro(a)linux-mips.org are queue-4.4/video-fbdev-pmag-ba-fb-remove-bad-__init-annotation.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "usb: hcd: initialize hcd->flags to 0 when rm hcd" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: hcd: initialize hcd->flags to 0 when rm hcd to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: William wu <wulf(a)rock-chips.com> Date: Fri, 13 Jan 2017 11:04:22 +0800 Subject: usb: hcd: initialize hcd->flags to 0 when rm hcd From: William wu <wulf(a)rock-chips.com> [ Upstream commit 76b8db0d480e8045e1a1902fc9ab143b3b9ef115 ] On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale. If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add. [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [173.297222] usb usb6: Product: xHCI Host Controller [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto [173.298680] hub 6-0:1.0: USB hub found [173.298749] hub 6-0:1.0: 1 port detected [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected [173.395418] hub 5-0:1.0: activate --> -19 [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 [173.603513] Hardware name: Google Kevin (DT) [173.603531] Call trace: [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 ... [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc [173.604607] [<0000000000b16000>] 0xb16000 [173.604622] handlers: [173.604648] [<ffffffc000642084>] usb_hcd_irq [173.604673] Disabling IRQ #228 Signed-off-by: William wu <wulf(a)rock-chips.com> Acked-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/core/hcd.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2997,6 +2997,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) } usb_put_invalidate_rhdev(hcd); + hcd->flags = 0; } EXPORT_SYMBOL_GPL(usb_remove_hcd); Patches currently in stable-queue which might be from wulf(a)rock-chips.com are queue-4.4/usb-hcd-initialize-hcd-flags-to-0-when-rm-hcd.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "serial: sh-sci: Fix register offsets for the IRDA serial port" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix register offsets for the IRDA serial port to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Date: Wed, 11 Jan 2017 16:43:32 +0200 Subject: serial: sh-sci: Fix register offsets for the IRDA serial port From: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> [ Upstream commit a752ba18af8285e3eeda572f40dddaebff0c3621 ] Even though most of its registers are 8-bit wide, the IRDA has two 16-bit registers that make it a 16-bit peripheral and not a 8-bit peripheral with addresses shifted by one. Fix the registers offset in the driver and the platform data regshift value. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas(a)ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas(a)glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 - drivers/tty/serial/sh-sci.c | 17 ++++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -165,7 +165,6 @@ static struct plat_sci_port scif2_platfo .scscr = SCSCR_TE | SCSCR_RE, .type = PORT_IRDA, .ops = &sh770x_sci_port_ops, - .regshift = 1, }; static struct resource scif2_resources[] = { --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -163,18 +163,17 @@ static const struct plat_sci_reg sci_reg }, /* - * Common definitions for legacy IrDA ports, dependent on - * regshift value. + * Common definitions for legacy IrDA ports. */ [SCIx_IRDA_REGTYPE] = { [SCSMR] = { 0x00, 8 }, - [SCBRR] = { 0x01, 8 }, - [SCSCR] = { 0x02, 8 }, - [SCxTDR] = { 0x03, 8 }, - [SCxSR] = { 0x04, 8 }, - [SCxRDR] = { 0x05, 8 }, - [SCFCR] = { 0x06, 8 }, - [SCFDR] = { 0x07, 16 }, + [SCBRR] = { 0x02, 8 }, + [SCSCR] = { 0x04, 8 }, + [SCxTDR] = { 0x06, 8 }, + [SCxSR] = { 0x08, 16 }, + [SCxRDR] = { 0x0a, 8 }, + [SCFCR] = { 0x0c, 8 }, + [SCFDR] = { 0x0e, 16 }, [SCTFDR] = sci_reg_invalid, [SCRFDR] = sci_reg_invalid, [SCSPTR] = sci_reg_invalid, Patches currently in stable-queue which might be from laurent.pinchart+renesas(a)ideasonboard.com are queue-4.4/serial-sh-sci-fix-register-offsets-for-the-irda-serial-port.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "powerpc/corenet: explicitly disable the SDHC controller on kmcoge4" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: powerpc-corenet-explicitly-disable-the-sdhc-controller-on-kmcoge4.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Valentin Longchamp <valentin.longchamp(a)keymile.com> Date: Thu, 15 Dec 2016 14:22:26 +0100 Subject: powerpc/corenet: explicitly disable the SDHC controller on kmcoge4 From: Valentin Longchamp <valentin.longchamp(a)keymile.com> [ Upstream commit a674c7d470bb47e82f4eb1fa944eadeac2f6bbaf ] It is not implemented on the kmcoge4 hardware and if not disabled it leads to error messages with the corenet32_smp_defconfig. Signed-off-by: Valentin Longchamp <valentin.longchamp(a)keymile.com> Signed-off-by: Scott Wood <oss(a)buserror.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/boot/dts/fsl/kmcoge4.dts | 4 ++++ 1 file changed, 4 insertions(+) --- a/arch/powerpc/boot/dts/fsl/kmcoge4.dts +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -83,6 +83,10 @@ }; }; + sdhc@114000 { + status = "disabled"; + }; + i2c@119000 { status = "disabled"; }; Patches currently in stable-queue which might be from valentin.longchamp(a)keymile.com are queue-4.4/powerpc-corenet-explicitly-disable-the-sdhc-controller-on-kmcoge4.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "s390/qeth: issue STARTLAN as first IPA command" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: issue STARTLAN as first IPA command to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-issue-startlan-as-first-ipa-command.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Thu, 12 Jan 2017 15:48:42 +0100 Subject: s390/qeth: issue STARTLAN as first IPA command From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit 1034051045d125579ab1e8fcd5a724eeb0e70149 ] STARTLAN needs to be the first IPA command after MPC initialization completes. So move the qeth_send_startlan() call from the layer disciplines into the core path, right after the MPC handshake. While at it, replace the magic LAN OFFLINE return code with the existing enum. Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Reviewed-by: Thomas Richter <tmricht(a)linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_core.h | 1 - drivers/s390/net/qeth_core_main.c | 21 +++++++++++++++++---- drivers/s390/net/qeth_l2_main.c | 15 --------------- drivers/s390/net/qeth_l3_main.c | 15 --------------- 4 files changed, 17 insertions(+), 35 deletions(-) --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -909,7 +909,6 @@ void qeth_clear_thread_running_bit(struc int qeth_core_hardsetup_card(struct qeth_card *); void qeth_print_status_message(struct qeth_card *); int qeth_init_qdio_queues(struct qeth_card *); -int qeth_send_startlan(struct qeth_card *); int qeth_send_ipa_cmd(struct qeth_card *, struct qeth_cmd_buffer *, int (*reply_cb) (struct qeth_card *, struct qeth_reply *, unsigned long), --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -2955,7 +2955,7 @@ int qeth_send_ipa_cmd(struct qeth_card * } EXPORT_SYMBOL_GPL(qeth_send_ipa_cmd); -int qeth_send_startlan(struct qeth_card *card) +static int qeth_send_startlan(struct qeth_card *card) { int rc; struct qeth_cmd_buffer *iob; @@ -2968,7 +2968,6 @@ int qeth_send_startlan(struct qeth_card rc = qeth_send_ipa_cmd(card, iob, NULL, NULL); return rc; } -EXPORT_SYMBOL_GPL(qeth_send_startlan); static int qeth_default_setadapterparms_cb(struct qeth_card *card, struct qeth_reply *reply, unsigned long data) @@ -5080,6 +5079,20 @@ retriable: goto out; } + rc = qeth_send_startlan(card); + if (rc) { + QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + if (rc == IPA_RC_LAN_OFFLINE) { + dev_warn(&card->gdev->dev, + "The LAN is offline\n"); + card->lan_online = 0; + } else { + rc = -ENODEV; + goto out; + } + } else + card->lan_online = 1; + card->options.ipa4.supported_funcs = 0; card->options.ipa6.supported_funcs = 0; card->options.adp.supported_funcs = 0; @@ -5091,14 +5104,14 @@ retriable: if (qeth_is_supported(card, IPA_SETADAPTERPARMS)) { rc = qeth_query_setadapterparms(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "6err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); goto out; } } if (qeth_adp_supported(card, IPA_SETADP_SET_DIAG_ASSIST)) { rc = qeth_query_setdiagass(card); if (rc < 0) { - QETH_DBF_TEXT_(SETUP, 2, "7err%d", rc); + QETH_DBF_TEXT_(SETUP, 2, "8err%d", rc); goto out; } } --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -1203,21 +1203,6 @@ static int __qeth_l2_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: if ((card->info.type == QETH_CARD_TYPE_OSD) || (card->info.type == QETH_CARD_TYPE_OSX)) { if (qeth_l2_start_ipassists(card)) --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3298,21 +3298,6 @@ static int __qeth_l3_set_online(struct c /* softsetup */ QETH_DBF_TEXT(SETUP, 2, "softsetp"); - rc = qeth_send_startlan(card); - if (rc) { - QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); - if (rc == 0xe080) { - dev_warn(&card->gdev->dev, - "The LAN is offline\n"); - card->lan_online = 0; - goto contin; - } - rc = -ENODEV; - goto out_remove; - } else - card->lan_online = 1; - -contin: rc = qeth_l3_setadapter_parms(card); if (rc) QETH_DBF_TEXT_(SETUP, 2, "2err%04x", rc); Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-4.4/s390-qeth-issue-startlan-as-first-ipa-command.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "phy: increase size of MII_BUS_ID_SIZE and bus_id" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled phy: increase size of MII_BUS_ID_SIZE and bus_id to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: phy-increase-size-of-mii_bus_id_size-and-bus_id.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Date: Thu, 19 Jan 2017 17:05:04 +0100 Subject: phy: increase size of MII_BUS_ID_SIZE and bus_id From: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> [ Upstream commit 4567d686f5c6d955e57a3afa1741944c1e7f4033 ] Some bus names are pretty long and do not fit into 17 chars. Increase therefore MII_BUS_ID_SIZE and phy_fixup.bus_id to larger number. Now mii_bus.id can host larger name. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga(a)gmail.com> Signed-off-by: Magnus Öberg <magnus.oberg(a)westermo.se> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/phy.h | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -136,11 +136,7 @@ static inline const char *phy_modes(phy_ /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ #define PHY_ID_FMT "%s:%02x" -/* - * Need to be a little smaller than phydev->dev.bus_id to leave room - * for the ":%02x" - */ -#define MII_BUS_ID_SIZE (20 - 3) +#define MII_BUS_ID_SIZE 61 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ @@ -599,7 +595,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[20]; + char bus_id[MII_BUS_ID_SIZE + 3]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); Patches currently in stable-queue which might be from volodymyr.bendiuga(a)gmail.com are queue-4.4/phy-increase-size-of-mii_bus_id_size-and-bus_id.patch

7 years, 5 months

1
0
0 0

[Linux-stable-mirror] Patch "PCI: mvebu: Handle changes to the bridge windows while enabled" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled PCI: mvebu: Handle changes to the bridge windows while enabled to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pci-mvebu-handle-changes-to-the-bridge-windows-while-enabled.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Nov 9 18:22:51 CET 2017 From: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> Date: Mon, 12 Dec 2016 11:30:20 -0700 Subject: PCI: mvebu: Handle changes to the bridge windows while enabled From: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> [ Upstream commit d9bf28e2650fe3eeefed7e34841aea07d10c6543 ] The PCI core will write to the bridge window config multiple times while they are enabled. This can lead to mbus failures like this: mvebu_mbus: cannot add window '4:e8', conflicts with another window mvebu-pcie mbus:pex@e0000000: Could not create MBus window at [mem 0xe0000000-0xe00fffff]: -22 For me this is happening during a hotplug cycle. The PCI core is not changing the values, just writing them twice while active. The patch addresses the general case of any change to an active window, but not atomically. The code is slightly refactored so io and mem can share more of the window logic. Signed-off-by: Jason Gunthorpe <jgunthorpe(a)obsidianresearch.com> Signed-off-by: Bjorn Helgaas <bhelgaas(a)google.com> Acked-by: Jason Cooper <jason(a)lakedaemon.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/pci/host/pci-mvebu.c | 101 +++++++++++++++++++++++++------------------ 1 file changed, 60 insertions(+), 41 deletions(-) --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -131,6 +131,12 @@ struct mvebu_pcie { int nports; }; +struct mvebu_pcie_window { + phys_addr_t base; + phys_addr_t remap; + size_t size; +}; + /* Structure representing one PCIe interface */ struct mvebu_pcie_port { char *name; @@ -148,10 +154,8 @@ struct mvebu_pcie_port { struct mvebu_sw_pci_bridge bridge; struct device_node *dn; struct mvebu_pcie *pcie; - phys_addr_t memwin_base; - size_t memwin_size; - phys_addr_t iowin_base; - size_t iowin_size; + struct mvebu_pcie_window memwin; + struct mvebu_pcie_window iowin; u32 saved_pcie_stat; }; @@ -377,23 +381,45 @@ static void mvebu_pcie_add_windows(struc } } +static void mvebu_pcie_set_window(struct mvebu_pcie_port *port, + unsigned int target, unsigned int attribute, + const struct mvebu_pcie_window *desired, + struct mvebu_pcie_window *cur) +{ + if (desired->base == cur->base && desired->remap == cur->remap && + desired->size == cur->size) + return; + + if (cur->size != 0) { + mvebu_pcie_del_windows(port, cur->base, cur->size); + cur->size = 0; + cur->base = 0; + + /* + * If something tries to change the window while it is enabled + * the change will not be done atomically. That would be + * difficult to do in the general case. + */ + } + + if (desired->size == 0) + return; + + mvebu_pcie_add_windows(port, target, attribute, desired->base, + desired->size, desired->remap); + *cur = *desired; +} + static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) { - phys_addr_t iobase; + struct mvebu_pcie_window desired = {}; /* Are the new iobase/iolimit values invalid? */ if (port->bridge.iolimit < port->bridge.iobase || port->bridge.iolimitupper < port->bridge.iobaseupper || !(port->bridge.command & PCI_COMMAND_IO)) { - - /* If a window was configured, remove it */ - if (port->iowin_base) { - mvebu_pcie_del_windows(port, port->iowin_base, - port->iowin_size); - port->iowin_base = 0; - port->iowin_size = 0; - } - + mvebu_pcie_set_window(port, port->io_target, port->io_attr, + &desired, &port->iowin); return; } @@ -410,32 +436,27 @@ static void mvebu_pcie_handle_iobase_cha * specifications. iobase is the bus address, port->iowin_base * is the CPU address. */ - iobase = ((port->bridge.iobase & 0xF0) << 8) | - (port->bridge.iobaseupper << 16); - port->iowin_base = port->pcie->io.start + iobase; - port->iowin_size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | - (port->bridge.iolimitupper << 16)) - - iobase) + 1; - - mvebu_pcie_add_windows(port, port->io_target, port->io_attr, - port->iowin_base, port->iowin_size, - iobase); + desired.remap = ((port->bridge.iobase & 0xF0) << 8) | + (port->bridge.iobaseupper << 16); + desired.base = port->pcie->io.start + desired.remap; + desired.size = ((0xFFF | ((port->bridge.iolimit & 0xF0) << 8) | + (port->bridge.iolimitupper << 16)) - + desired.remap) + + 1; + + mvebu_pcie_set_window(port, port->io_target, port->io_attr, &desired, + &port->iowin); } static void mvebu_pcie_handle_membase_change(struct mvebu_pcie_port *port) { + struct mvebu_pcie_window desired = {.remap = MVEBU_MBUS_NO_REMAP}; + /* Are the new membase/memlimit values invalid? */ if (port->bridge.memlimit < port->bridge.membase || !(port->bridge.command & PCI_COMMAND_MEMORY)) { - - /* If a window was configured, remove it */ - if (port->memwin_base) { - mvebu_pcie_del_windows(port, port->memwin_base, - port->memwin_size); - port->memwin_base = 0; - port->memwin_size = 0; - } - + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, + &desired, &port->memwin); return; } @@ -445,14 +466,12 @@ static void mvebu_pcie_handle_membase_ch * window to setup, according to the PCI-to-PCI bridge * specifications. */ - port->memwin_base = ((port->bridge.membase & 0xFFF0) << 16); - port->memwin_size = - (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - - port->memwin_base + 1; - - mvebu_pcie_add_windows(port, port->mem_target, port->mem_attr, - port->memwin_base, port->memwin_size, - MVEBU_MBUS_NO_REMAP); + desired.base = ((port->bridge.membase & 0xFFF0) << 16); + desired.size = (((port->bridge.memlimit & 0xFFF0) << 16) | 0xFFFFF) - + desired.base + 1; + + mvebu_pcie_set_window(port, port->mem_target, port->mem_attr, &desired, + &port->memwin); } /* Patches currently in stable-queue which might be from jgunthorpe(a)obsidianresearch.com are queue-4.4/pci-mvebu-handle-changes-to-the-bridge-windows-while-enabled.patch

7 years, 5 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror