- Linux-stable-mirror - lists.linaro.org

[PATCH 6.1 0/1] Oopses on module unload seen on 6.1.y

by Fedor Pchelkin

Hi, commit 959cadf09dbae7b304f03e039b8d8e13c529e2dd Author: Peter Zijlstra <peterz(a)infradead.org> Date: Mon Oct 14 10:05:48 2024 -0700 x86/its: Use dynamic thunks for indirect branches commit 872df34d7c51a79523820ea6a14860398c639b87 upstream. was ported at v6.1.139 and leads to kernel crashes there after module unload operations. Example trace: BUG: unable to handle page fault for address: ffff8fcb47dd4000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 34801067 P4D 34801067 PUD 100148063 PMD 107dd5063 PTE 8000000107dd4161 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 378 Comm: modprobe Not tainted 6.1.139-01446-g753bd4a5f9a9 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:__change_page_attr_set_clr+0x49d/0x1280 Call Trace: <TASK> ? free_unref_page_prepare+0x80/0x4b0 set_direct_map_invalid_noflush+0x6e/0xa0 __vunmap+0x18c/0x3e0 __vfree+0x21/0xb0 vfree+0x2b/0x90 module_memfree+0x1b/0x50 free_module+0x17c/0x250 __do_sys_delete_module+0x337/0x4b0 __x64_sys_delete_module+0x15/0x30 x64_sys_call+0x3f9a/0x43a0 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f70755c0807 </TASK> Modules linked in: dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua [last unloaded: scsi_debug] As mentioned in the blamed patch comment describing the backport adaptations: [ pawan: CONFIG_EXECMEM and CONFIG_EXECMEM_ROX are not supported on backport kernel, made changes to use module_alloc() and set_memory_*() for dynamic thunks. ] module_alloc/module_memfree in conjunction with memory protection routines were used. The allocated memory is vmalloc-based, and it ends up being ROX upon release inside its_free_mod(). Freeing of special permissioned memory in vmalloc requires its own handling. VM_FLUSH_RESET_PERMS flag was introduced for these purposes. In-kernel users dealing with the stuff had to care about this explicitly before commit 4c4eb3ecc91f ("x86/modules: Set VM_FLUSH_RESET_PERMS in module_alloc()"). More recent kernels starting from 6.2 have the commit and are not affected. So port it as a followup for ITS mitigation 6.1-series to fix the aforementioned failures. The problem concerns 5.15-series (currently in stable-queue) as well. It needs its own patch to apply cleanly. Will send it shortly, too. Found by Linux Verification Center (linuxtesting.org). Thomas Gleixner (1): x86/modules: Set VM_FLUSH_RESET_PERMS in module_alloc() arch/x86/kernel/ftrace.c | 2 -- arch/x86/kernel/kprobes/core.c | 1 - arch/x86/kernel/module.c | 9 +++++---- 3 files changed, 5 insertions(+), 7 deletions(-) -- 2.49.0

1 month, 1 week

2
2
0 0

[PATCH net 1/4] can: kvaser_pciefd: Force IRQ edge in case of nested IRQ

by Marc Kleine-Budde

From: Axel Forsman <axfo(a)kvaser.com> Avoid the driver missing IRQs by temporarily masking IRQs in the ISR to enforce an edge even if a different IRQ is signalled before handled IRQs are cleared. Fixes: 48f827d4f48f ("can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR") Cc: stable(a)vger.kernel.org Signed-off-by: Axel Forsman <axfo(a)kvaser.com> Tested-by: Jimmy Assarsson <extja(a)kvaser.com> Reviewed-by: Jimmy Assarsson <extja(a)kvaser.com> Link: https://patch.msgid.link/20250520114332.8961-2-axfo@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/kvaser_pciefd.c | 83 ++++++++++++++++----------------- 1 file changed, 39 insertions(+), 44 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index cf0d51805272..9cc9176c2058 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1646,24 +1646,28 @@ static int kvaser_pciefd_read_buffer(struct kvaser_pciefd *pcie, int dma_buf) return res; } -static u32 kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) +static void kvaser_pciefd_receive_irq(struct kvaser_pciefd *pcie) { + void __iomem *srb_cmd_reg = KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG; u32 irq = ioread32(KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD0) { + kvaser_pciefd_read_buffer(pcie, 0); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, srb_cmd_reg); /* Rearm buffer */ + } + + if (irq & KVASER_PCIEFD_SRB_IRQ_DPD1) { kvaser_pciefd_read_buffer(pcie, 1); + iowrite32(KVASER_PCIEFD_SRB_CMD_RDB1, srb_cmd_reg); /* Rearm buffer */ + } if (unlikely(irq & KVASER_PCIEFD_SRB_IRQ_DOF0 || irq & KVASER_PCIEFD_SRB_IRQ_DOF1 || irq & KVASER_PCIEFD_SRB_IRQ_DUF0 || irq & KVASER_PCIEFD_SRB_IRQ_DUF1)) dev_err(&pcie->pci->dev, "DMA IRQ error 0x%08X\n", irq); - - iowrite32(irq, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IRQ_REG); - return irq; } static void kvaser_pciefd_transmit_irq(struct kvaser_pciefd_can *can) @@ -1691,29 +1695,22 @@ static irqreturn_t kvaser_pciefd_irq_handler(int irq, void *dev) struct kvaser_pciefd *pcie = (struct kvaser_pciefd *)dev; const struct kvaser_pciefd_irq_mask *irq_mask = pcie->driver_data->irq_mask; u32 pci_irq = ioread32(KVASER_PCIEFD_PCI_IRQ_ADDR(pcie)); - u32 srb_irq = 0; - u32 srb_release = 0; int i; if (!(pci_irq & irq_mask->all)) return IRQ_NONE; + iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + if (pci_irq & irq_mask->kcan_rx0) - srb_irq = kvaser_pciefd_receive_irq(pcie); + kvaser_pciefd_receive_irq(pcie); for (i = 0; i < pcie->nr_channels; i++) { if (pci_irq & irq_mask->kcan_tx[i]) kvaser_pciefd_transmit_irq(pcie->can[i]); } - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD0) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB0; - - if (srb_irq & KVASER_PCIEFD_SRB_IRQ_DPD1) - srb_release |= KVASER_PCIEFD_SRB_CMD_RDB1; - - if (srb_release) - iowrite32(srb_release, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); return IRQ_HANDLED; } @@ -1733,13 +1730,22 @@ static void kvaser_pciefd_teardown_can_ctrls(struct kvaser_pciefd *pcie) } } +static void kvaser_pciefd_disable_irq_srcs(struct kvaser_pciefd *pcie) +{ + unsigned int i; + + /* Masking PCI_IRQ is insufficient as running ISR will unmask it */ + iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); + for (i = 0; i < pcie->nr_channels; ++i) + iowrite32(0, pcie->can[i]->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); +} + static int kvaser_pciefd_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int ret; struct kvaser_pciefd *pcie; const struct kvaser_pciefd_irq_mask *irq_mask; - void __iomem *irq_en_base; pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL); if (!pcie) @@ -1805,8 +1811,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_IEN_REG); /* Enable PCI interrupts */ - irq_en_base = KVASER_PCIEFD_PCI_IEN_ADDR(pcie); - iowrite32(irq_mask->all, irq_en_base); + iowrite32(irq_mask->all, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); /* Ready the DMA buffers */ iowrite32(KVASER_PCIEFD_SRB_CMD_RDB0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CMD_REG); @@ -1820,8 +1825,7 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return 0; err_free_irq: - /* Disable PCI interrupts */ - iowrite32(0, irq_en_base); + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); err_pci_free_irq_vectors: @@ -1844,35 +1848,26 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return ret; } -static void kvaser_pciefd_remove_all_ctrls(struct kvaser_pciefd *pcie) -{ - int i; - - for (i = 0; i < pcie->nr_channels; i++) { - struct kvaser_pciefd_can *can = pcie->can[i]; - - if (can) { - iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); - unregister_candev(can->can.dev); - timer_delete(&can->bec_poll_timer); - kvaser_pciefd_pwm_stop(can); - free_candev(can->can.dev); - } - } -} - static void kvaser_pciefd_remove(struct pci_dev *pdev) { struct kvaser_pciefd *pcie = pci_get_drvdata(pdev); + unsigned int i; - kvaser_pciefd_remove_all_ctrls(pcie); + for (i = 0; i < pcie->nr_channels; ++i) { + struct kvaser_pciefd_can *can = pcie->can[i]; - /* Disable interrupts */ - iowrite32(0, KVASER_PCIEFD_SRB_ADDR(pcie) + KVASER_PCIEFD_SRB_CTRL_REG); - iowrite32(0, KVASER_PCIEFD_PCI_IEN_ADDR(pcie)); + unregister_candev(can->can.dev); + timer_delete(&can->bec_poll_timer); + kvaser_pciefd_pwm_stop(can); + } + kvaser_pciefd_disable_irq_srcs(pcie); free_irq(pcie->pci->irq, pcie); pci_free_irq_vectors(pcie->pci); + + for (i = 0; i < pcie->nr_channels; ++i) + free_candev(pcie->can[i]->can.dev); + pci_iounmap(pdev, pcie->reg_base); pci_release_regions(pdev); pci_disable_device(pdev); base-commit: 9e89db3d847f2d66d2799c5533d00aebee2be4d1 -- 2.47.2

1 month, 1 week

2
1
0 0

[PATCH v2 1/2] drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1

by Ville Syrjala

From: Ville Syrjälä <ville.syrjala(a)linux.intel.com> The intel-media-driver is currently broken on DG1 because it uses EXEC_CAPTURE with recovarable contexts. Relax the check to allow that. I've also submitted a fix for the intel-media-driver: https://github.com/intel/media-driver/pull/1920 Cc: stable(a)vger.kernel.org Cc: Matthew Auld <matthew.auld(a)intel.com> Cc: Thomas Hellström <thomas.hellstrom(a)linux.intel.com> Testcase: igt/gem_exec_capture/capture-invisible Fixes: 71b1669ea9bd ("drm/i915/uapi: tweak error capture on recoverable contexts") Reviewed-by: Andi Shyti <andi.shyti(a)linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> --- drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c index ca7e9216934a..ea9d5063ce78 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c @@ -2013,7 +2013,7 @@ static int eb_capture_stage(struct i915_execbuffer *eb) continue; if (i915_gem_context_is_recoverable(eb->gem_context) && - (IS_DGFX(eb->i915) || GRAPHICS_VER_FULL(eb->i915) > IP_VER(12, 0))) + GRAPHICS_VER_FULL(eb->i915) > IP_VER(12, 10)) return -EINVAL; for_each_batch_create_order(eb, j) { -- 2.49.0

1 month, 1 week

4
4
0 0

[PATCH v3] usb: hub: lack of clearing xHC resources

by Pawel Laszczak

The xHC resources allocated for USB devices are not released in correct order after resuming in case when while suspend device was reconnected. This issue has been detected during the fallowing scenario: - connect hub HS to root port - connect LS/FS device to hub port - wait for enumeration to finish - force host to suspend - reconnect hub attached to root port - wake host For this scenario during enumeration of USB LS/FS device the Cadence xHC reports completion error code for xHC commands because the xHC resources used for devices has not been properly released. XHCI specification doesn't mention that device can be reset in any order so, we should not treat this issue as Cadence xHC controller bug. Similar as during disconnecting in this case the device resources should be cleared starting form the last usb device in tree toward the root hub. To fix this issue usbcore driver should call hcd->driver->reset_device for all USB devices connected to hub which was reconnected while suspending. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <stable(a)vger.kernel.org> Signed-off-by: Pawel Laszczak <pawell(a)cadence.com> --- Changelog: v3: - Changed patch title - Corrected typo - Moved hub_hc_release_resources above mutex_lock(hcd->address0_mutex) v2: - Replaced disconnection procedure with releasing only the xHC resources drivers/usb/core/hub.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index a76bb50b6202..dcba4281ea48 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -6065,6 +6065,36 @@ void usb_hub_cleanup(void) usb_deregister(&hub_driver); } /* usb_hub_cleanup() */ +/** + * hub_hc_release_resources - clear resources used by host controller + * @udev: pointer to device being released + * + * Context: task context, might sleep + * + * Function releases the host controller resources in correct order before + * making any operation on resuming usb device. The host controller resources + * allocated for devices in tree should be released starting from the last + * usb device in tree toward the root hub. This function is used only during + * resuming device when usb device require reinitialization – that is, when + * flag udev->reset_resume is set. + * + * This call is synchronous, and may not be used in an interrupt context. + */ +static void hub_hc_release_resources(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int i; + + /* Release up resources for all children before this device */ + for (i = 0; i < udev->maxchild; i++) + if (hub->ports[i]->child) + hub_hc_release_resources(hub->ports[i]->child); + + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); +} + /** * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) @@ -6129,6 +6159,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; + if (udev->reset_resume) + hub_hc_release_resources(udev); + mutex_lock(hcd->address0_mutex); for (i = 0; i < PORT_INIT_TRIES; ++i) { -- 2.43.0

1 month, 1 week

4
5
0 0

[PATCH 3/4 v3] crypto: octeontx2: Fix address alignment on CN10K A0/A1 and OcteonTX2

by Bharat Bhushan

octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size() Memory allocated are used for following purpose: - Input data or scatter list address - 8-Byte alignment - Output data or gather list address - 8-Byte alignment - Completion address - 32-Byte alignment. This patch ensures all addresses are aligned as mentioned above. Signed-off-by: Bharat Bhushan <bbhushan2(a)marvell.com> Cc: <stable(a)vger.kernel.org> #v6.5+ --- v2->v3: - Align DMA memory to ARCH_DMA_MINALIGN as that is mapped as bidirectional v1->v2: - Fixed memory padding size calculation as per review comment .../marvell/octeontx2/otx2_cpt_reqmgr.h | 63 ++++++++++++++----- 1 file changed, 48 insertions(+), 15 deletions(-) diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h index e27e849b01df..204a31755710 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h @@ -34,6 +34,9 @@ #define SG_COMP_2 2 #define SG_COMP_1 1 +#define OTX2_CPT_DPTR_RPTR_ALIGN 8 +#define OTX2_CPT_RES_ADDR_ALIGN 32 + union otx2_cpt_opcode { u16 flags; struct { @@ -417,10 +420,9 @@ static inline struct otx2_cpt_inst_info * otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, gfp_t gfp) { - int align = OTX2_CPT_DMA_MINALIGN; struct otx2_cpt_inst_info *info; - u32 dlen, align_dlen, info_len; - u16 g_sz_bytes, s_sz_bytes; + u32 dlen, info_len; + u16 g_len, s_len; u32 total_mem_len; if (unlikely(req->in_cnt > OTX2_CPT_MAX_SG_IN_CNT || @@ -429,22 +431,51 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, return NULL; } - g_sz_bytes = ((req->in_cnt + 3) / 4) * - sizeof(struct otx2_cpt_sglist_component); - s_sz_bytes = ((req->out_cnt + 3) / 4) * - sizeof(struct otx2_cpt_sglist_component); + /* Allocate memory to meet below alignment requirement: + * ---------------------------------- + * | struct otx2_cpt_inst_info | + * | (No alignment required) | + * | -----------------------------| + * | | padding for 8B alignment | + * |----------------------------------| + * | SG List Gather/Input memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * |----------------------------------| + * | SG List Scatter/Output memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * | (padding for below alignment) | + * | -----------------------------| + * | | padding for 32B alignment | + * |----------------------------------| + * | Result response memory | + * ---------------------------------- + */ - dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE; - align_dlen = ALIGN(dlen, align); - info_len = ALIGN(sizeof(*info), align); - total_mem_len = align_dlen + info_len + sizeof(union otx2_cpt_res_s); + info_len = sizeof(*info); + + g_len = ((req->in_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + s_len = ((req->out_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + + dlen = g_len + s_len + SG_LIST_HDR_SIZE; + + /* Allocate extra memory for SG and response address alignment */ + total_mem_len = ALIGN(info_len, ARCH_DMA_MINALIGN) + dlen; + total_mem_len = ALIGN(total_mem_len, OTX2_CPT_DPTR_RPTR_ALIGN); + total_mem_len += (OTX2_CPT_RES_ADDR_ALIGN - 1) & + ~(OTX2_CPT_DPTR_RPTR_ALIGN - 1); + total_mem_len += sizeof(union otx2_cpt_res_s); info = kzalloc(total_mem_len, gfp); if (unlikely(!info)) return NULL; info->dlen = dlen; - info->in_buffer = (u8 *)info + info_len; + info->in_buffer = PTR_ALIGN((u8 *)info + info_len, ARCH_DMA_MINALIGN); + info->out_buffer = info->in_buffer + SG_LIST_HDR_SIZE + g_len; ((u16 *)info->in_buffer)[0] = req->out_cnt; ((u16 *)info->in_buffer)[1] = req->in_cnt; @@ -460,7 +491,7 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, } if (setup_sgio_components(pdev, req->out, req->out_cnt, - &info->in_buffer[8 + g_sz_bytes])) { + info->out_buffer)) { dev_err(&pdev->dev, "Failed to setup scatter list\n"); goto destroy_info; } @@ -476,8 +507,10 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, * Get buffer for union otx2_cpt_res_s response * structure and its physical address */ - info->completion_addr = info->in_buffer + align_dlen; - info->comp_baddr = info->dptr_baddr + align_dlen; + info->completion_addr = PTR_ALIGN((info->in_buffer + dlen), + OTX2_CPT_RES_ADDR_ALIGN); + info->comp_baddr = ALIGN((info->dptr_baddr + dlen), + OTX2_CPT_RES_ADDR_ALIGN); return info; -- 2.34.1

1 month, 1 week

3
2
0 0

[PATCH 4/4 v4] crypto: octeontx2: Fix address alignment on CN10KB and CN10KA-B0

by Bharat Bhushan

octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size() Memory allocated are used for following purpose: - Input data or scatter list address - 8-Byte alignment - Output data or gather list address - 8-Byte alignment - Completion address - 32-Byte alignment. This patch ensures all addresses are aligned as mentioned above. Signed-off-by: Bharat Bhushan <bbhushan2(a)marvell.com> Cc: <stable(a)vger.kernel.org> # v6.8+ --- v3->v4: - Again fixed memory size calculation as per review comment v2->v3: - Align DMA memory to ARCH_DMA_MINALIGN as that is mapped as bidirectional v1->v2: - Fixed memory padding size calculation as per review comment .../marvell/octeontx2/otx2_cpt_reqmgr.h | 59 ++++++++++++++----- 1 file changed, 44 insertions(+), 15 deletions(-) diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h index 98de93851ba1..90a031421aac 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h @@ -350,22 +350,48 @@ static inline struct otx2_cpt_inst_info * cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, gfp_t gfp) { - u32 dlen = 0, g_len, sg_len, info_len; - int align = OTX2_CPT_DMA_MINALIGN; + u32 dlen = 0, g_len, s_len, sg_len, info_len; struct otx2_cpt_inst_info *info; - u16 g_sz_bytes, s_sz_bytes; u32 total_mem_len; int i; - g_sz_bytes = ((req->in_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); - s_sz_bytes = ((req->out_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); + /* Allocate memory to meet below alignment requirement: + * ------------------------------------ + * | struct otx2_cpt_inst_info | + * | (No alignment required) | + * | --------------------------------| + * | | padding for ARCH_DMA_MINALIGN | + * | | alignment | + * |------------------------------------| + * | SG List Gather/Input memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * |---------------------------------- | + * | SG List Scatter/Output memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * | -------------------------------| + * | | padding for 32B alignment | + * |------------------------------------| + * | Result response memory | + * | Alignment = 32Byte | + * ------------------------------------ + */ + + info_len = sizeof(*info); + + g_len = ((req->in_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + s_len = ((req->out_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + sg_len = g_len + s_len; - g_len = ALIGN(g_sz_bytes, align); - sg_len = ALIGN(g_len + s_sz_bytes, align); - info_len = ALIGN(sizeof(*info), align); - total_mem_len = sg_len + info_len + sizeof(union otx2_cpt_res_s); + /* Allocate extra memory for SG and response address alignment */ + total_mem_len = ALIGN(info_len, OTX2_CPT_DPTR_RPTR_ALIGN); + total_mem_len += (ARCH_DMA_MINALIGN - 1) & + ~(OTX2_CPT_DPTR_RPTR_ALIGN - 1); + total_mem_len += ALIGN(sg_len, OTX2_CPT_RES_ADDR_ALIGN); + total_mem_len += sizeof(union otx2_cpt_res_s); info = kzalloc(total_mem_len, gfp); if (unlikely(!info)) @@ -375,7 +401,8 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, dlen += req->in[i].size; info->dlen = dlen; - info->in_buffer = (u8 *)info + info_len; + info->in_buffer = PTR_ALIGN((u8 *)info + info_len, ARCH_DMA_MINALIGN); + info->out_buffer = info->in_buffer + g_len; info->gthr_sz = req->in_cnt; info->sctr_sz = req->out_cnt; @@ -387,7 +414,7 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, } if (sgv2io_components_setup(pdev, req->out, req->out_cnt, - &info->in_buffer[g_len])) { + info->out_buffer)) { dev_err(&pdev->dev, "Failed to setup scatter list\n"); goto destroy_info; } @@ -404,8 +431,10 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, * Get buffer for union otx2_cpt_res_s response * structure and its physical address */ - info->completion_addr = info->in_buffer + sg_len; - info->comp_baddr = info->dptr_baddr + sg_len; + info->completion_addr = PTR_ALIGN((info->in_buffer + sg_len), + OTX2_CPT_RES_ADDR_ALIGN); + info->comp_baddr = ALIGN((info->dptr_baddr + sg_len), + OTX2_CPT_RES_ADDR_ALIGN); return info; -- 2.34.1

1 month, 1 week

1
0
0 0

[PATCH 3/4 v4] crypto: octeontx2: Fix address alignment on CN10K A0/A1 and OcteonTX2

by Bharat Bhushan

octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size() Memory allocated are used for following purpose: - Input data or scatter list address - 8-Byte alignment - Output data or gather list address - 8-Byte alignment - Completion address - 32-Byte alignment. This patch ensures all addresses are aligned as mentioned above. Signed-off-by: Bharat Bhushan <bbhushan2(a)marvell.com> Cc: <stable(a)vger.kernel.org> # v6.5+ --- v3->v4: - Again fixed memory size calculation as per review comment v2->v3: - Align DMA memory to ARCH_DMA_MINALIGN as that is mapped as bidirectional v1->v2: - Fixed memory padding size calculation as per review comment .../marvell/octeontx2/otx2_cpt_reqmgr.h | 66 ++++++++++++++----- 1 file changed, 51 insertions(+), 15 deletions(-) diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h index e27e849b01df..98de93851ba1 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h @@ -34,6 +34,9 @@ #define SG_COMP_2 2 #define SG_COMP_1 1 +#define OTX2_CPT_DPTR_RPTR_ALIGN 8 +#define OTX2_CPT_RES_ADDR_ALIGN 32 + union otx2_cpt_opcode { u16 flags; struct { @@ -417,10 +420,9 @@ static inline struct otx2_cpt_inst_info * otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, gfp_t gfp) { - int align = OTX2_CPT_DMA_MINALIGN; struct otx2_cpt_inst_info *info; - u32 dlen, align_dlen, info_len; - u16 g_sz_bytes, s_sz_bytes; + u32 dlen, info_len; + u16 g_len, s_len; u32 total_mem_len; if (unlikely(req->in_cnt > OTX2_CPT_MAX_SG_IN_CNT || @@ -429,22 +431,54 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, return NULL; } - g_sz_bytes = ((req->in_cnt + 3) / 4) * - sizeof(struct otx2_cpt_sglist_component); - s_sz_bytes = ((req->out_cnt + 3) / 4) * - sizeof(struct otx2_cpt_sglist_component); + /* Allocate memory to meet below alignment requirement: + * ------------------------------------ + * | struct otx2_cpt_inst_info | + * | (No alignment required) | + * | --------------------------------| + * | | padding for ARCH_DMA_MINALIGN | + * | | alignment | + * |------------------------------------| + * | SG List Header of 8 Byte | + * |------------------------------------| + * | SG List Gather/Input memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * |---------------------------------- | + * | SG List Scatter/Output memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * | -------------------------------| + * | | padding for 32B alignment | + * |------------------------------------| + * | Result response memory | + * | Alignment = 32Byte | + * ------------------------------------ + */ - dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE; - align_dlen = ALIGN(dlen, align); - info_len = ALIGN(sizeof(*info), align); - total_mem_len = align_dlen + info_len + sizeof(union otx2_cpt_res_s); + info_len = sizeof(*info); + + g_len = ((req->in_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + s_len = ((req->out_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + + dlen = g_len + s_len + SG_LIST_HDR_SIZE; + + /* Allocate extra memory for SG and response address alignment */ + total_mem_len = ALIGN(info_len, OTX2_CPT_DPTR_RPTR_ALIGN); + total_mem_len += (ARCH_DMA_MINALIGN - 1) & + ~(OTX2_CPT_DPTR_RPTR_ALIGN - 1); + total_mem_len += ALIGN(dlen, OTX2_CPT_RES_ADDR_ALIGN); + total_mem_len += sizeof(union otx2_cpt_res_s); info = kzalloc(total_mem_len, gfp); if (unlikely(!info)) return NULL; info->dlen = dlen; - info->in_buffer = (u8 *)info + info_len; + info->in_buffer = PTR_ALIGN((u8 *)info + info_len, ARCH_DMA_MINALIGN); + info->out_buffer = info->in_buffer + SG_LIST_HDR_SIZE + g_len; ((u16 *)info->in_buffer)[0] = req->out_cnt; ((u16 *)info->in_buffer)[1] = req->in_cnt; @@ -460,7 +494,7 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, } if (setup_sgio_components(pdev, req->out, req->out_cnt, - &info->in_buffer[8 + g_sz_bytes])) { + info->out_buffer)) { dev_err(&pdev->dev, "Failed to setup scatter list\n"); goto destroy_info; } @@ -476,8 +510,10 @@ otx2_sg_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, * Get buffer for union otx2_cpt_res_s response * structure and its physical address */ - info->completion_addr = info->in_buffer + align_dlen; - info->comp_baddr = info->dptr_baddr + align_dlen; + info->completion_addr = PTR_ALIGN((info->in_buffer + dlen), + OTX2_CPT_RES_ADDR_ALIGN); + info->comp_baddr = ALIGN((info->dptr_baddr + dlen), + OTX2_CPT_RES_ADDR_ALIGN); return info; -- 2.34.1

1 month, 1 week

1
0
0 0

[PATCH 2/4 v4] crypto: octeontx2: Fix address alignment issue on ucode loading

by Bharat Bhushan

octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size()" Completion address should be 32-Byte alignment when loading microcode. Signed-off-by: Bharat Bhushan <bbhushan2(a)marvell.com> Cc: <stable(a)vger.kernel.org> # v6.5+ --- v2->v3: - Align DMA memory to ARCH_DMA_MINALIGN as that is mapped as bidirectional .../marvell/octeontx2/otx2_cptpf_ucode.c | 35 +++++++++++-------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c index 3a818ac89295..88f0f72a4462 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c +++ b/drivers/crypto/marvell/octeontx2/otx2_cptpf_ucode.c @@ -1491,12 +1491,13 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf) union otx2_cpt_opcode opcode; union otx2_cpt_res_s *result; union otx2_cpt_inst_s inst; + dma_addr_t result_baddr; dma_addr_t rptr_baddr; struct pci_dev *pdev; - u32 len, compl_rlen; int timeout = 10000; + void *base, *rptr; int ret, etype; - void *rptr; + u32 len; /* * We don't get capabilities if it was already done @@ -1521,22 +1522,28 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf) if (ret) goto delete_grps; - compl_rlen = ALIGN(sizeof(union otx2_cpt_res_s), OTX2_CPT_DMA_MINALIGN); - len = compl_rlen + LOADFVC_RLEN; + /* Allocate extra memory for "rptr" and "result" pointer alignment */ + len = LOADFVC_RLEN + ARCH_DMA_MINALIGN + + sizeof(union otx2_cpt_res_s) + OTX2_CPT_RES_ADDR_ALIGN; - result = kzalloc(len, GFP_KERNEL); - if (!result) { + base = kzalloc(len, GFP_KERNEL); + if (!base) { ret = -ENOMEM; goto lf_cleanup; } - rptr_baddr = dma_map_single(&pdev->dev, (void *)result, len, - DMA_BIDIRECTIONAL); + + rptr = PTR_ALIGN(base, ARCH_DMA_MINALIGN); + rptr_baddr = dma_map_single(&pdev->dev, rptr, len, DMA_BIDIRECTIONAL); if (dma_mapping_error(&pdev->dev, rptr_baddr)) { dev_err(&pdev->dev, "DMA mapping failed\n"); ret = -EFAULT; - goto free_result; + goto free_rptr; } - rptr = (u8 *)result + compl_rlen; + + result = (union otx2_cpt_res_s *)PTR_ALIGN(rptr + LOADFVC_RLEN, + OTX2_CPT_RES_ADDR_ALIGN); + result_baddr = ALIGN(rptr_baddr + LOADFVC_RLEN, + OTX2_CPT_RES_ADDR_ALIGN); /* Fill in the command */ opcode.s.major = LOADFVC_MAJOR_OP; @@ -1548,14 +1555,14 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf) /* 64-bit swap for microcode data reads, not needed for addresses */ cpu_to_be64s(&iq_cmd.cmd.u); iq_cmd.dptr = 0; - iq_cmd.rptr = rptr_baddr + compl_rlen; + iq_cmd.rptr = rptr_baddr; iq_cmd.cptr.u = 0; for (etype = 1; etype < OTX2_CPT_MAX_ENG_TYPES; etype++) { result->s.compcode = OTX2_CPT_COMPLETION_CODE_INIT; iq_cmd.cptr.s.grp = otx2_cpt_get_eng_grp(&cptpf->eng_grps, etype); - otx2_cpt_fill_inst(&inst, &iq_cmd, rptr_baddr); + otx2_cpt_fill_inst(&inst, &iq_cmd, result_baddr); lfs->ops->send_cmd(&inst, 1, &cptpf->lfs.lf[0]); timeout = 10000; @@ -1578,8 +1585,8 @@ int otx2_cpt_discover_eng_capabilities(struct otx2_cptpf_dev *cptpf) error_no_response: dma_unmap_single(&pdev->dev, rptr_baddr, len, DMA_BIDIRECTIONAL); -free_result: - kfree(result); +free_rptr: + kfree(base); lf_cleanup: otx2_cptlf_shutdown(lfs); delete_grps: -- 2.34.1

1 month, 1 week

1
0
0 0

[PATCH] objtool/rust: relax slice condition to cover more `noreturn` Rust functions

by Miguel Ojeda

Developers are indeed hitting other of the `noreturn` slice symbols in Nova [1], thus relax the last check in the list so that we catch all of them, i.e. *_4core5slice5index22slice_index_order_fail *_4core5slice5index24slice_end_index_len_fail *_4core5slice5index26slice_start_index_len_fail *_4core5slice5index29slice_end_index_overflow_fail *_4core5slice5index31slice_start_index_overflow_fail These all exist since at least Rust 1.78.0, thus backport it too. See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions") for more details. Cc: stable(a)vger.kernel.org # Needed in 6.12.y and later. Cc: John Hubbard <jhubbard(a)nvidia.com> Cc: Timur Tabi <ttabi(a)nvidia.com> Cc: Kane York <kanepyork(a)gmail.com> Cc: Josh Poimboeuf <jpoimboe(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Reported-by: Joel Fernandes <joelagnelf(a)nvidia.com> Link: https://lore.kernel.org/rust-for-linux/20250513180757.GA1295002@joelnvbox/ [1] Signed-off-by: Miguel Ojeda <ojeda(a)kernel.org> --- I tested it with the Timur's `alex` branch, but a Tested-by is appreciated. Thanks! tools/objtool/check.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/objtool/check.c b/tools/objtool/check.c index b21b12ec88d9..f23bdda737aa 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -230,7 +230,8 @@ static bool is_rust_noreturn(const struct symbol *func) str_ends_with(func->name, "_7___rustc17rust_begin_unwind") || strstr(func->name, "_4core9panicking13assert_failed") || strstr(func->name, "_4core9panicking11panic_const24panic_const_") || - (strstr(func->name, "_4core5slice5index24slice_") && + (strstr(func->name, "_4core5slice5index") && + strstr(func->name, "slice_") && str_ends_with(func->name, "_fail")); } base-commit: a5806cd506af5a7c19bcd596e4708b5c464bfd21 -- 2.49.0

1 month, 1 week

3
2
0 0

[PATCH 5.10.y/5.15.y] ELF: fix kernel.randomize_va_space double read

by Feng Liu

From: Alexey Dobriyan <adobriyan(a)gmail.com> [ Upstream commit 2a97388a807b6ab5538aa8f8537b2463c6988bd2 ] ELF loader uses "randomize_va_space" twice. It is sysctl and can change at any moment, so 2 loads could see 2 different values in theory with unpredictable consequences. Issue exactly one load for consistent value across one exec. Signed-off-by: Alexey Dobriyan <adobriyan(a)gmail.com> Link: https://lore.kernel.org/r/3329905c-7eb8-400a-8f0a-d87cff979b5b@p183 Signed-off-by: Kees Cook <kees(a)kernel.org> Signed-off-by: Feng Liu <Feng.Liu3(a)windriver.com> Signed-off-by: He Zhe <Zhe.He(a)windriver.com> --- Verified the build test. --- fs/binfmt_elf.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 11dc833ca2c4..a1f0dff2f818 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -1008,7 +1008,8 @@ static int load_elf_binary(struct linux_binprm *bprm) if (elf_read_implies_exec(*elf_ex, executable_stack)) current->personality |= READ_IMPLIES_EXEC; - if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) + const int snapshot_randomize_va_space = READ_ONCE(randomize_va_space); + if (!(current->personality & ADDR_NO_RANDOMIZE) && snapshot_randomize_va_space) current->flags |= PF_RANDOMIZE; setup_new_exec(bprm); @@ -1278,7 +1279,7 @@ static int load_elf_binary(struct linux_binprm *bprm) mm->end_data = end_data; mm->start_stack = bprm->p; - if ((current->flags & PF_RANDOMIZE) && (randomize_va_space > 1)) { + if ((current->flags & PF_RANDOMIZE) && (snapshot_randomize_va_space > 1)) { /* * For architectures with ELF randomization, when executing * a loader directly (i.e. no interpreter listed in ELF -- 2.34.1

1 month, 1 week

4
7
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror