- Linux-stable-mirror - lists.linaro.org

patch "iio: adc: ad7606: fix raw read for 18-bit chips" added to char-misc-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: ad7606: fix raw read for 18-bit chips to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the char-misc-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. From 3f5fd1717ae9497215f22aa748fc2c09df88b0e3 Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Fri, 2 May 2025 10:04:30 -0500 Subject: iio: adc: ad7606: fix raw read for 18-bit chips Fix 18-bit raw read for 18-bit chips by applying a mask to the value we receive from the SPI controller. SPI controllers either return 1, 2 or 4 bytes per word depending on the bits_per_word. For 16-bit chips, there was no problem since they raw data fit exactly in the 2 bytes received from the SPI controller. But now that we have 18-bit chips and we are using bits_per_word = 18, we cannot assume that the extra bits in the 32-bit word are always zero. In fact, with the AXI SPI Engine controller, these bits are not always zero which caused the raw values to read 10s of 1000s of volts instead of the correct value. Therefore, we need to mask the value we receive from the SPI controller to ensure that only the 18 bits of real data are used. Fixes: f3838e934dff ("iio: adc: ad7606: add support for AD7606C-{16,18} parts") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Link: https://patch.msgid.link/20250502-iio-adc-ad7606-fix-raw-read-for-18-bit-ch… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/ad7606.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c index 703556eb7257..8ed65a35b486 100644 --- a/drivers/iio/adc/ad7606.c +++ b/drivers/iio/adc/ad7606.c @@ -727,17 +727,16 @@ static int ad7606_scan_direct(struct iio_dev *indio_dev, unsigned int ch, goto error_ret; chan = &indio_dev->channels[ch + 1]; - if (chan->scan_type.sign == 'u') { - if (realbits > 16) - *val = st->data.buf32[ch]; - else - *val = st->data.buf16[ch]; - } else { - if (realbits > 16) - *val = sign_extend32(st->data.buf32[ch], realbits - 1); - else - *val = sign_extend32(st->data.buf16[ch], realbits - 1); - } + + if (realbits > 16) + *val = st->data.buf32[ch]; + else + *val = st->data.buf16[ch]; + + *val &= GENMASK(realbits - 1, 0); + + if (chan->scan_type.sign == 's') + *val = sign_extend32(*val, realbits - 1); error_ret: if (!st->gpio_convst) { -- 2.49.0

1 month, 2 weeks

1
0
0 0

patch "iio: adc: ad7173: fix compiling without gpiolib" added to char-misc-testing

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: ad7173: fix compiling without gpiolib to my char-misc git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git in the char-misc-testing branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will be merged to the char-misc-next branch sometime soon, after it passes testing, and the merge window is open. If you have any questions about this process, please let me know. From c553aa1b03719400a30d9387477190d4743fc1de Mon Sep 17 00:00:00 2001 From: David Lechner <dlechner(a)baylibre.com> Date: Tue, 22 Apr 2025 15:12:27 -0500 Subject: iio: adc: ad7173: fix compiling without gpiolib Fix compiling the ad7173 driver when CONFIG_GPIOLIB is not set by selecting GPIOLIB to be always enabled and remove the #if. Commit 031bdc8aee01 ("iio: adc: ad7173: add calibration support") placed unrelated code in the middle of the #if IS_ENABLED(CONFIG_GPIOLIB) block which caused the reported compile error. However, later commit 7530ed2aaa3f ("iio: adc: ad7173: add openwire detection support for single conversions") makes use of the gpio regmap even when we aren't providing gpio controller support. So it makes more sense to always enable GPIOLIB rather than trying to make it optional. Reported-by: kernel test robot <lkp(a)intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202504220824.HVrTVov1-lkp@intel.com/ Fixes: 031bdc8aee01 ("iio: adc: ad7173: add calibration support") Signed-off-by: David Lechner <dlechner(a)baylibre.com> Link: https://patch.msgid.link/20250422-iio-adc-ad7173-fix-compile-without-gpioli… Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/Kconfig | 5 +++-- drivers/iio/adc/ad7173.c | 15 +-------------- 2 files changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 6529df1a498c..ba746754a816 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -129,8 +129,9 @@ config AD7173 tristate "Analog Devices AD7173 driver" depends on SPI_MASTER select AD_SIGMA_DELTA - select GPIO_REGMAP if GPIOLIB - select REGMAP_SPI if GPIOLIB + select GPIOLIB + select GPIO_REGMAP + select REGMAP_SPI help Say yes here to build support for Analog Devices AD7173 and similar ADC Currently supported models: diff --git a/drivers/iio/adc/ad7173.c b/drivers/iio/adc/ad7173.c index 69de5886474c..b3e6bd2a55d7 100644 --- a/drivers/iio/adc/ad7173.c +++ b/drivers/iio/adc/ad7173.c @@ -230,10 +230,8 @@ struct ad7173_state { unsigned long long *config_cnts; struct clk *ext_clk; struct clk_hw int_clk_hw; -#if IS_ENABLED(CONFIG_GPIOLIB) struct regmap *reg_gpiocon_regmap; struct gpio_regmap *gpio_regmap; -#endif }; static unsigned int ad4115_sinc5_data_rates[] = { @@ -288,8 +286,6 @@ static const char *const ad7173_clk_sel[] = { "ext-clk", "xtal" }; -#if IS_ENABLED(CONFIG_GPIOLIB) - static const struct regmap_range ad7173_range_gpio[] = { regmap_reg_range(AD7173_REG_GPIO, AD7173_REG_GPIO), }; @@ -543,12 +539,6 @@ static int ad7173_gpio_init(struct ad7173_state *st) return 0; } -#else -static int ad7173_gpio_init(struct ad7173_state *st) -{ - return 0; -} -#endif /* CONFIG_GPIOLIB */ static struct ad7173_state *ad_sigma_delta_to_ad7173(struct ad_sigma_delta *sd) { @@ -1797,10 +1787,7 @@ static int ad7173_probe(struct spi_device *spi) if (ret) return ret; - if (IS_ENABLED(CONFIG_GPIOLIB)) - return ad7173_gpio_init(st); - - return 0; + return ad7173_gpio_init(st); } static const struct of_device_id ad7173_of_match[] = { -- 2.49.0

1 month, 2 weeks

1
0
0 0

[PATCH v 3] usb: dwc2: gadget: Fix enter to hibernation for UTMI+ PHY

by Minas Harutyunyan

For UTMI+ PHY, according to programming guide, first should be set PMUACTV bit then STOPPCLK bit. Otherwise, when the device issues Remote Wakeup, then host notices disconnect instead. For ULPI PHY, above mentioned bits must be set in reversed order: STOPPCLK then PMUACTV. Fixes: 4483ef3c1685 ("usb: dwc2: Add hibernation updates for ULPI PHY") Cc: stable(a)vger.kernel.org Reported-by: Tomasz Mon <tomasz.mon(a)nordicsemi.no> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> --- Changes in v3: - Rebased on top of 6.15-rc4 Changes in v2: - Added Cc: stable(a)vger.kernel.org drivers/usb/dwc2/gadget.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 300ea4969f0c..b817002bdee0 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -5383,20 +5383,33 @@ int dwc2_gadget_enter_hibernation(struct dwc2_hsotg *hsotg) if (gusbcfg & GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */ gpwrdn |= GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY; - } - dwc2_writel(hsotg, gpwrdn, GPWRDN); - udelay(10); + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); - /* Suspend the Phy Clock */ - pcgcctl = dwc2_readl(hsotg, PCGCTL); - pcgcctl |= PCGCTL_STOPPCLK; - dwc2_writel(hsotg, pcgcctl, PCGCTL); - udelay(10); + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); - gpwrdn = dwc2_readl(hsotg, GPWRDN); - gpwrdn |= GPWRDN_PMUACTV; - dwc2_writel(hsotg, gpwrdn, GPWRDN); - udelay(10); + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + } else { + /* UTMI+ Interface */ + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + gpwrdn = dwc2_readl(hsotg, GPWRDN); + gpwrdn |= GPWRDN_PMUACTV; + dwc2_writel(hsotg, gpwrdn, GPWRDN); + udelay(10); + + pcgcctl = dwc2_readl(hsotg, PCGCTL); + pcgcctl |= PCGCTL_STOPPCLK; + dwc2_writel(hsotg, pcgcctl, PCGCTL); + udelay(10); + } /* Set flag to indicate that we are in hibernation */ hsotg->hibernated = 1; base-commit: b4432656b36e5cc1d50a1f2dc15357543add530e -- 2.41.0

1 month, 2 weeks

2
1
0 0

[PATCH v2] usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach

by RD Babiera

This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS. tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer. Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail. Turn VBUS on before tcpm_set_roles to meet timing requirement. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable(a)vger.kernel.org Signed-off-by: RD Babiera <rdbabiera(a)google.com> Reviewed-by: Badhri Jagan Sridharan <badhri(a)google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> --- Changes since v1: * Rebased on top of usb-linus for v6.15 --- drivers/usb/typec/tcpm/tcpm.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 8adf6f954633..05c62a1673af 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4353,16 +4353,6 @@ static int tcpm_src_attach(struct tcpm_port *port) tcpm_enable_auto_vbus_discharge(port, true); - ret = tcpm_set_roles(port, true, TYPEC_SOURCE, tcpm_data_role_for_source(port)); - if (ret < 0) - return ret; - - if (port->pd_supported) { - ret = port->tcpc->set_pd_rx(port->tcpc, true); - if (ret < 0) - goto out_disable_mux; - } - /* * USB Type-C specification, version 1.2, * chapter 4.5.2.2.8.1 (Attached.SRC Requirements) @@ -4372,12 +4362,22 @@ static int tcpm_src_attach(struct tcpm_port *port) (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) { ret = tcpm_set_vconn(port, true); if (ret < 0) - goto out_disable_pd; + return ret; } ret = tcpm_set_vbus(port, true); if (ret < 0) goto out_disable_vconn; + + ret = tcpm_set_roles(port, true, TYPEC_SOURCE, tcpm_data_role_for_source(port)); + if (ret < 0) + goto out_disable_vbus; + + if (port->pd_supported) { + ret = port->tcpc->set_pd_rx(port->tcpc, true); + if (ret < 0) + goto out_disable_mux; + } port->pd_capable = false; @@ -4389,14 +4389,14 @@ static int tcpm_src_attach(struct tcpm_port *port) return 0; -out_disable_vconn: - tcpm_set_vconn(port, false); -out_disable_pd: - if (port->pd_supported) - port->tcpc->set_pd_rx(port->tcpc, false); out_disable_mux: tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE, TYPEC_ORIENTATION_NONE); +out_disable_vbus: + tcpm_set_vbus(port, false); +out_disable_vconn: + tcpm_set_vconn(port, false); + return ret; } base-commit: 82f2b0b97b36ee3fcddf0f0780a9a0825d52fec3 -- 2.49.0.1045.g170613ef41-goog

1 month, 2 weeks

2
1
0 0

[PATCH] usb: gadget: udc: renesas_usb3: Add null pointer check in usb3_irq_epc_pipe0_setup()

by Wentao Liang

The function usb3_irq_epc_pipe0_setup() calls the function usb3_get_request(), but does not check its return value which is a null pointer if the function fails. This can result in a null pointer dereference. Add a null pointer check for usb3_get_request() to avoid null pointer dereference when the function fails. Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller") Cc: stable(a)vger.kernel.org # v4.5 Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/usb/gadget/udc/renesas_usb3.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index fce5c41d9f29..51f2dd8cbf91 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -1920,11 +1920,13 @@ static void usb3_irq_epc_pipe0_setup(struct renesas_usb3 *usb3) { struct usb_ctrlrequest ctrl; struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0); + struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep); /* Call giveback function if previous transfer is not completed */ + if (!usb3_req) + return; if (usb3_ep->started) - usb3_request_done(usb3_ep, usb3_get_request(usb3_ep), - -ECONNRESET); + usb3_request_done(usb3_ep, usb3_req, -ECONNRESET); usb3_p0_con_clear_buffer(usb3); usb3_get_setup_data(usb3, &ctrl); -- 2.42.0.windows.2

1 month, 2 weeks

2
1
0 0

[PATCH 4/4 v3] crypto: octeontx2: Fix address alignment on CN10KB and CN10KA-B0

by Bharat Bhushan

octeontx2 crypto driver allocates memory using kmalloc/kzalloc, and uses this memory for dma (does dma_map_single()). It assumes that kmalloc/kzalloc will return 128-byte aligned address. But kmalloc/kzalloc returns 8-byte aligned address after below changes: "9382bc44b5f5 arm64: allow kmalloc() caches aligned to the smaller cache_line_size() Memory allocated are used for following purpose: - Input data or scatter list address - 8-Byte alignment - Output data or gather list address - 8-Byte alignment - Completion address - 32-Byte alignment. This patch ensures all addresses are aligned as mentioned above. Signed-off-by: Bharat Bhushan <bbhushan2(a)marvell.com> Cc: <stable(a)vger.kernel.org> #v6.8+ --- v2->v3: - Align DMA memory to ARCH_DMA_MINALIGN as that is mapped as bidirectional v1->v2: - Fixed memory padding size calculation as per review comment .../marvell/octeontx2/otx2_cpt_reqmgr.h | 58 ++++++++++++++----- 1 file changed, 43 insertions(+), 15 deletions(-) diff --git a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h index 204a31755710..8e95036e91d9 100644 --- a/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h +++ b/drivers/crypto/marvell/octeontx2/otx2_cpt_reqmgr.h @@ -350,22 +350,47 @@ static inline struct otx2_cpt_inst_info * cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, gfp_t gfp) { - u32 dlen = 0, g_len, sg_len, info_len; - int align = OTX2_CPT_DMA_MINALIGN; + u32 dlen = 0, g_len, s_len, sg_len, info_len; struct otx2_cpt_inst_info *info; - u16 g_sz_bytes, s_sz_bytes; u32 total_mem_len; int i; - g_sz_bytes = ((req->in_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); - s_sz_bytes = ((req->out_cnt + 2) / 3) * - sizeof(struct cn10kb_cpt_sglist_component); + /* Allocate memory to meet below alignment requirement: + * ---------------------------------- + * | struct otx2_cpt_inst_info | + * | (No alignment required) | + * | -----------------------------| + * | | padding for 8B alignment | + * |----------------------------------| + * | SG List Gather/Input memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * |----------------------------------| + * | SG List Scatter/Output memory | + * | Length = multiple of 32Bytes | + * | Alignment = 8Byte | + * | (padding for below alignment) | + * | -----------------------------| + * | | padding for 32B alignment | + * |----------------------------------| + * | Result response memory | + * ---------------------------------- + */ + + info_len = sizeof(*info); + + g_len = ((req->in_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + s_len = ((req->out_cnt + 2) / 3) * + sizeof(struct cn10kb_cpt_sglist_component); + sg_len = g_len + s_len; - g_len = ALIGN(g_sz_bytes, align); - sg_len = ALIGN(g_len + s_sz_bytes, align); - info_len = ALIGN(sizeof(*info), align); - total_mem_len = sg_len + info_len + sizeof(union otx2_cpt_res_s); + /* Allocate extra memory for SG and response address alignment */ + total_mem_len = ALIGN(info_len, ARCH_DMA_MINALIGN) + sg_len; + total_mem_len = ALIGN(total_mem_len, OTX2_CPT_DPTR_RPTR_ALIGN); + total_mem_len += (OTX2_CPT_RES_ADDR_ALIGN - 1) & + ~(OTX2_CPT_DPTR_RPTR_ALIGN - 1); + total_mem_len += sizeof(union otx2_cpt_res_s); info = kzalloc(total_mem_len, gfp); if (unlikely(!info)) @@ -375,7 +400,8 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, dlen += req->in[i].size; info->dlen = dlen; - info->in_buffer = (u8 *)info + info_len; + info->in_buffer = PTR_ALIGN((u8 *)info + info_len, ARCH_DMA_MINALIGN); + info->out_buffer = info->in_buffer + g_len; info->gthr_sz = req->in_cnt; info->sctr_sz = req->out_cnt; @@ -387,7 +413,7 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, } if (sgv2io_components_setup(pdev, req->out, req->out_cnt, - &info->in_buffer[g_len])) { + info->out_buffer)) { dev_err(&pdev->dev, "Failed to setup scatter list\n"); goto destroy_info; } @@ -404,8 +430,10 @@ cn10k_sgv2_info_create(struct pci_dev *pdev, struct otx2_cpt_req_info *req, * Get buffer for union otx2_cpt_res_s response * structure and its physical address */ - info->completion_addr = info->in_buffer + sg_len; - info->comp_baddr = info->dptr_baddr + sg_len; + info->completion_addr = PTR_ALIGN((info->in_buffer + sg_len), + OTX2_CPT_RES_ADDR_ALIGN); + info->comp_baddr = ALIGN((info->dptr_baddr + sg_len), + OTX2_CPT_RES_ADDR_ALIGN); return info; -- 2.34.1

1 month, 2 weeks

1
0
0 0

Panic with a lis2dw12 accelerometer

by Maud Spierings

I've just experienced an Issue that I think may be a regression. I'm enabling a device which incorporates a lis2dw12 accelerometer, currently I am running 6.12 lts, so 6.12.29 as of typing this message. My first issue is a Panic: [ 0.281814] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c0 [ 0.290626] Mem abort info: [ 0.293465] ESR = 0x0000000096000004 [ 0.297230] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.302558] SET = 0, FnV = 0 [ 0.305619] EA = 0, S1PTW = 0 [ 0.308766] FSC = 0x04: level 0 translation fault [ 0.313649] Data abort info: [ 0.316534] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 0.322032] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 0.327093] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 0.332413] [00000000000000c0] user address but active_mm is swapper [ 0.338774] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.345044] Modules linked in: [ 0.348106] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.12.28-00054-gf24728d836e5 #13 [ 0.356983] Hardware name: GOcontroll Moduline Mini (DT) [ 0.362297] Workqueue: events_unbound deferred_probe_work_func [ 0.368143] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.375109] pc : device_set_deferred_probe_reason+0x58/0x84 [ 0.380686] lr : device_set_deferred_probe_reason+0x50/0x84 [ 0.386262] sp : ffff8000816d34d0 [ 0.389577] x29: ffff8000816d34d0 x28: ffff000004099d08 x27: ffff0000040998f0 [ 0.396724] x26: 0000000030a40000 x25: ffff000004099be4 x24: ffff00003fdf2758 [ 0.403870] x23: 000000000000000f x22: ffff8000816d3508 x21: ffff000000260a20 [ 0.411017] x20: ffff00000409a808 x19: ffff800081299db8 x18: ffffffffffffffff [ 0.418163] x17: 00007fff7e57efff x16: ffff8000815ad000 x15: ffff0000002617da [ 0.425309] x14: 0000000000000001 x13: 0a7365696c707075 x12: 7320656c62616e65 [ 0.432454] x11: 0000000669b8cb4b x10: 0000000000000020 x9 : ffff8000816d3590 [ 0.439599] x8 : ffff8000816d3590 x7 : 0000000000000000 x6 : ffff800080fe16a6 [ 0.446745] x5 : ffff000000260a3f x4 : ffff800080fc3912 x3 : 0000000000000000 [ 0.453890] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000260a20 [ 0.461037] Call trace: [ 0.463485] device_set_deferred_probe_reason+0x58/0x84 [ 0.468715] dev_err_probe+0xa0/0xec [ 0.472296] st_sensors_power_enable+0x50/0x60 [ 0.476748] st_accel_i2c_probe+0x70/0xe0 [ 0.480763] i2c_device_probe+0xfc/0x2d8 [ 0.484692] really_probe+0xc0/0x394 [ 0.488271] __driver_probe_device+0x7c/0x14c [ 0.492631] driver_probe_device+0x3c/0x120 [ 0.496818] __device_attach_driver+0xbc/0x160 [ 0.501265] bus_for_each_drv+0x88/0xe8 [ 0.505108] __device_attach+0xa0/0x1b4 [ 0.508949] device_initial_probe+0x14/0x20 [ 0.513135] bus_probe_device+0xb0/0xbc [ 0.516974] device_add+0x594/0x7a4 [ 0.520469] device_register+0x20/0x3c [ 0.524224] i2c_new_client_device+0x19c/0x3d0 [ 0.528671] of_i2c_register_device+0xd4/0xfc [ 0.533033] of_i2c_register_devices+0x6c/0x140 [ 0.537568] i2c_register_adapter+0x1f4/0x728 [ 0.541929] __i2c_add_numbered_adapter+0x58/0xa8 [ 0.546637] i2c_add_adapter+0xa0/0xd0 [ 0.550389] i2c_add_numbered_adapter+0x2c/0x38 [ 0.554924] i2c_imx_probe+0x2b0/0x6d4 [ 0.558679] platform_probe+0x68/0xdc [ 0.562347] really_probe+0xc0/0x394 [ 0.565926] __driver_probe_device+0x7c/0x14c [ 0.570286] driver_probe_device+0x3c/0x120 [ 0.574473] __device_attach_driver+0xbc/0x160 [ 0.578920] bus_for_each_drv+0x88/0xe8 [ 0.582763] __device_attach+0xa0/0x1b4 [ 0.586602] device_initial_probe+0x14/0x20 [ 0.590790] bus_probe_device+0xb0/0xbc [ 0.594628] deferred_probe_work_func+0xb8/0x11c [ 0.599250] process_one_work+0x180/0x2dc [ 0.603265] worker_thread+0x2c0/0x3e0 [ 0.607017] kthread+0x110/0x120 [ 0.610252] ret_from_fork+0x10/0x20 [ 0.613836] Code: 911a8021 97f9326d f9402681 aa0003f5 (f9406020) [ 0.619931] ---[ end trace 0000000000000000 ]--- [ 0.624551] Kernel panic - not syncing: Oops: Fatal exception [ 0.630299] SMP: stopping secondary CPUs [ 0.634543] Kernel Offset: disabled [ 0.638032] CPU features: 0x00,00000080,00200000,4200420b [ 0.643433] Memory Limit: none It seems that indio_dev->dev is not initialized in st_sensors_power_enable(), this causes an issue when devm_regulator_bulk_get_enable() fails and then calls dev_err_probe with an uninitialized device. To fix this I added: indio_dev->dev = client->dev; just before the call to st_sensors_power_enable() in drivers/iio/accel/st_accel_i2c.c This fixed the kernel panic but showed another issue: 0.440413] sysfs: cannot create duplicate filename '/devices/platform/soc(a)0/30800000.bus/30a40000.i2c/i2c-2/2-0018' [ 0.440422] CPU: 0 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.12.29+ #6 [ 0.440430] Hardware name: GOcontroll Moduline Mini (DT) [ 0.440435] Workqueue: events_unbound deferred_probe_work_func [ 0.440449] Call trace: [ 0.440452] dump_backtrace+0xd0/0x120 [ 0.440462] show_stack+0x18/0x24 [ 0.440469] dump_stack_lvl+0x60/0x80 [ 0.440478] dump_stack+0x18/0x24 [ 0.440483] sysfs_warn_dup+0x64/0x80 [ 0.440491] sysfs_create_dir_ns+0xf4/0x120 [ 0.440496] kobject_add_internal+0xb4/0x2d0 [ 0.440504] kobject_add+0x9c/0x108 [ 0.440511] device_add+0xb0/0x7a4 [ 0.440519] cdev_device_add+0x50/0xbc [ 0.440525] __iio_device_register+0x718/0x924 [ 0.440535] __devm_iio_device_register+0x28/0x8c [ 0.440542] st_accel_common_probe+0xd4/0xf0 [ 0.440550] st_accel_i2c_probe+0xa0/0xe0 [ 0.440556] i2c_device_probe+0xfc/0x2d8 [ 0.440563] really_probe+0xc0/0x394 [ 0.440568] __driver_probe_device+0x7c/0x14c [ 0.440573] driver_probe_device+0x3c/0x120 [ 0.440578] __device_attach_driver+0xbc/0x160 [ 0.440583] bus_for_each_drv+0x88/0xe8 [ 0.440590] __device_attach+0xa0/0x1b4 [ 0.440595] device_initial_probe+0x14/0x20 [ 0.440601] bus_probe_device+0xb0/0xbc [ 0.440605] deferred_probe_work_func+0xb8/0x11c [ 0.440610] process_one_work+0x180/0x2dc [ 0.440616] worker_thread+0x2c0/0x3e0 [ 0.440621] kthread+0x110/0x120 [ 0.440628] ret_from_fork+0x10/0x20 [ 0.440636] kobject: kobject_add_internal failed for 2-0018 with -EEXIST, don't try to register things with the same name in the same directory. [ 0.453688] st-accel-i2c 2-0018: probe with driver st-accel-i2c failed with error -17 In /sys/bus/i2c/devices I can indeed see 2-0018 present, but it doesn't show up on the iio bus (/sys/bus/iio/devices), so I am guessing somewhere in the driver it registers it before it should, and then again when it should. This is where my ability to fix thing fizzles out and so here I am asking for assistance. Kind regards, Maud

1 month, 2 weeks

2
2
0 0

[PATCH] drm/xe/svm: Fix regression disallowing 64K SVM migration

by Maarten Lankhorst

When changing the condition from >= SZ_64K, it was changed to <= SZ_64K. This disallows migration of 64K, which is the exact minimum allowed. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5057 Fixes: a9ac0fa455b0 ("drm/xe: Strict migration policy for atomic SVM faults") Cc: stable(a)vger.kernel.org Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray(a)intel.com> Signed-off-by: Maarten Lankhorst <dev(a)lankhorst.se> --- drivers/gpu/drm/xe/xe_svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/xe_svm.c b/drivers/gpu/drm/xe/xe_svm.c index 4432685936ed4..a7386334d48c4 100644 --- a/drivers/gpu/drm/xe/xe_svm.c +++ b/drivers/gpu/drm/xe/xe_svm.c @@ -820,7 +820,7 @@ bool xe_svm_range_needs_migrate_to_vram(struct xe_svm_range *range, struct xe_vm return false; } - if (preferred_region_is_vram && range_size <= SZ_64K && !supports_4K_migration(vm->xe)) { + if (preferred_region_is_vram && range_size < SZ_64K && !supports_4K_migration(vm->xe)) { drm_warn(&vm->xe->drm, "Platform doesn't support SZ_4K range migration\n"); return false; } -- 2.45.2

1 month, 2 weeks

2
1
0 0

[PATCH net] hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()

by Saurabh Sengar

The MANA driver's probe registers netdevice via the following call chain: mana_probe() register_netdev() register_netdevice() register_netdevice() calls notifier callback for netvsc driver, holding the netdev mutex via netdev_lock_ops(). Further this netvsc notifier callback end up attempting to acquire the same lock again in dev_xdp_propagate() leading to deadlock. netvsc_netdev_event() netvsc_vf_setxdp() dev_xdp_propagate() This deadlock was not observed so far because net_shaper_ops was never set and this lock in noop in this case. Fix this by using netif_xdp_propagate instead of dev_xdp_propagate to avoid recursive locking in this path. This issue has not observed so far because net_shaper_ops was unset, making the lock path effectively a no-op. To prevent recursive locking and avoid this deadlock, replace dev_xdp_propagate() with netif_xdp_propagate(), which does not acquire the lock again. Also, clean up the unregistration path by removing unnecessary call to netvsc_vf_setxdp(), since unregister_netdevice_many_notify() already performs this cleanup via dev_xdp_uninstall. Fixes: 97246d6d21c2 ("net: hold netdev instance lock during ndo_bpf") Cc: stable(a)vger.kernel.org Signed-off-by: Saurabh Sengar <ssengar(a)linux.microsoft.com> --- drivers/net/hyperv/netvsc_bpf.c | 2 +- drivers/net/hyperv/netvsc_drv.c | 2 -- net/core/dev.c | 1 + 3 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/hyperv/netvsc_bpf.c b/drivers/net/hyperv/netvsc_bpf.c index e01c5997a551..1dd3755d9e6d 100644 --- a/drivers/net/hyperv/netvsc_bpf.c +++ b/drivers/net/hyperv/netvsc_bpf.c @@ -183,7 +183,7 @@ int netvsc_vf_setxdp(struct net_device *vf_netdev, struct bpf_prog *prog) xdp.command = XDP_SETUP_PROG; xdp.prog = prog; - ret = dev_xdp_propagate(vf_netdev, &xdp); + ret = netif_xdp_propagate(vf_netdev, &xdp); if (ret && prog) bpf_prog_put(prog); diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index d8b169ac0343..ee3aaf9c10e6 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -2462,8 +2462,6 @@ static int netvsc_unregister_vf(struct net_device *vf_netdev) netdev_info(ndev, "VF unregistering: %s\n", vf_netdev->name); - netvsc_vf_setxdp(vf_netdev, NULL); - reinit_completion(&net_device_ctx->vf_add); netdev_rx_handler_unregister(vf_netdev); netdev_upper_dev_unlink(vf_netdev, ndev); diff --git a/net/core/dev.c b/net/core/dev.c index fccf2167b235..8c6c9d7fba26 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -9953,6 +9953,7 @@ int netif_xdp_propagate(struct net_device *dev, struct netdev_bpf *bpf) return dev->netdev_ops->ndo_bpf(dev, bpf); } +EXPORT_SYMBOL_GPL(netif_xdp_propagate); u32 dev_xdp_prog_id(struct net_device *dev, enum bpf_xdp_mode mode) { -- 2.43.0

1 month, 2 weeks

4
3
0 0

[PATCH v2] r8152: Add wake up function for RTL8153

by Wentao Liang

In rtl8153_runtime_enable(), the runtime enable/disable logic for RTL8153 devices was incomplete, missing r8153_queue_wake() to enable or disable the automatic wake-up function. A proper implementation can be found in rtl8156_runtime_enable(). Add r8153_queue_wake(tp, true) if enable flag is set true, and add r8153_queue_wake(tp, false) otherwise. Fixes: 02552754a7ac ("r8152: adjust rtl8153_runtime_enable function") Cc: stable(a)vger.kernel.org # v4.13 Signed-off-by: Wentao Liang <vulab(a)iscas.ac.cn> --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 468c73974046..cb708b79a7af 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4004,10 +4004,12 @@ static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable) static void rtl8153_runtime_enable(struct r8152 *tp, bool enable) { if (enable) { + r8153_queue_wake(tp, true); r8153_u1u2en(tp, false); r8153_u2p3en(tp, false); rtl_runtime_suspend_enable(tp, true); } else { + r8153_queue_wake(tp, false); rtl_runtime_suspend_enable(tp, false); switch (tp->version) { -- 2.42.0.windows.2

1 month, 2 weeks

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror