- Linux-stable-mirror - lists.linaro.org

FAILED: patch "[PATCH] can: flexcan: remove not needed struct flexcan_priv::tx_mb" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From e05237f9da42ee52e73acea0bb082d788e111229 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde <mkl(a)pengutronix.de> Date: Fri, 9 Nov 2018 15:01:50 +0100 Subject: [PATCH] can: flexcan: remove not needed struct flexcan_priv::tx_mb and struct flexcan_priv::tx_mb_idx The previous patch changes the TX path to always use the last mailbox regardless of the used offload scheme (rx-fifo or timestamp based). This means members "tx_mb" and "tx_mb_idx" of the struct flexcan_priv don't depend on the offload scheme, so replace them by compile time constants. Cc: linux-stable <stable(a)vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 677c41701cf3..68b46395c580 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -258,9 +258,7 @@ struct flexcan_priv { struct can_rx_offload offload; struct flexcan_regs __iomem *regs; - struct flexcan_mb __iomem *tx_mb; struct flexcan_mb __iomem *tx_mb_reserved; - u8 tx_mb_idx; u32 reg_ctrl_default; u32 reg_imask1_default; u32 reg_imask2_default; @@ -514,6 +512,7 @@ static int flexcan_get_berr_counter(const struct net_device *dev, static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *dev) { const struct flexcan_priv *priv = netdev_priv(dev); + struct flexcan_regs __iomem *regs = priv->regs; struct can_frame *cf = (struct can_frame *)skb->data; u32 can_id; u32 data; @@ -536,17 +535,17 @@ static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *de if (cf->can_dlc > 0) { data = be32_to_cpup((__be32 *)&cf->data[0]); - priv->write(data, &priv->tx_mb->data[0]); + priv->write(data, &regs->mb[FLEXCAN_TX_MB].data[0]); } if (cf->can_dlc > 4) { data = be32_to_cpup((__be32 *)&cf->data[4]); - priv->write(data, &priv->tx_mb->data[1]); + priv->write(data, &regs->mb[FLEXCAN_TX_MB].data[1]); } can_put_echo_skb(skb, dev, 0); - priv->write(can_id, &priv->tx_mb->can_id); - priv->write(ctrl, &priv->tx_mb->can_ctrl); + priv->write(can_id, &regs->mb[FLEXCAN_TX_MB].can_id); + priv->write(ctrl, &regs->mb[FLEXCAN_TX_MB].can_ctrl); /* Errata ERR005829 step8: * Write twice INACTIVE(0x8) code to first MB. @@ -737,7 +736,7 @@ static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv) u32 iflag1, iflag2; iflag2 = priv->read(&regs->iflag2) & priv->reg_imask2_default & - ~FLEXCAN_IFLAG_MB(priv->tx_mb_idx); + ~FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB); iflag1 = priv->read(&regs->iflag1) & priv->reg_imask1_default; return (u64)iflag2 << 32 | iflag1; @@ -787,7 +786,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) reg_iflag2 = priv->read(&regs->iflag2); /* transmission complete interrupt */ - if (reg_iflag2 & FLEXCAN_IFLAG_MB(priv->tx_mb_idx)) { + if (reg_iflag2 & FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB)) { handled = IRQ_HANDLED; stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; @@ -795,8 +794,8 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) /* after sending a RTR frame MB is in RX mode */ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE, - &priv->tx_mb->can_ctrl); - priv->write(FLEXCAN_IFLAG_MB(priv->tx_mb_idx), &regs->iflag2); + &regs->mb[FLEXCAN_TX_MB].can_ctrl); + priv->write(FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB), &regs->iflag2); netif_wake_queue(dev); } @@ -938,7 +937,7 @@ static int flexcan_chip_start(struct net_device *dev) reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_SRX_DIS | FLEXCAN_MCR_IRMQ | - FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(priv->tx_mb_idx); + FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(FLEXCAN_TX_MB); if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) reg_mcr &= ~FLEXCAN_MCR_FEN; @@ -1006,7 +1005,7 @@ static int flexcan_chip_start(struct net_device *dev) /* mark TX mailbox as INACTIVE */ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE, - &priv->tx_mb->can_ctrl); + &regs->mb[FLEXCAN_TX_MB].can_ctrl); /* acceptance mask/acceptance code (accept everything) */ priv->write(0x0, &regs->rxgmask); @@ -1365,11 +1364,9 @@ static int flexcan_probe(struct platform_device *pdev) priv->tx_mb_reserved = &regs->mb[FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP]; else priv->tx_mb_reserved = &regs->mb[FLEXCAN_TX_MB_RESERVED_OFF_FIFO]; - priv->tx_mb_idx = FLEXCAN_TX_MB; - priv->tx_mb = &regs->mb[priv->tx_mb_idx]; priv->reg_imask1_default = 0; - priv->reg_imask2_default = FLEXCAN_IFLAG_MB(priv->tx_mb_idx); + priv->reg_imask2_default = FLEXCAN_IFLAG_MB(FLEXCAN_TX_MB); priv->offload.mailbox_read = flexcan_mailbox_read;

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] can: flexcan: Always use last mailbox for TX" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From cbffaf7aa09edbaea2bc7dc440c945297095e2fd Mon Sep 17 00:00:00 2001 From: Alexander Stein <alexander.stein(a)systec-electronic.com> Date: Thu, 11 Oct 2018 17:01:25 +0200 Subject: [PATCH] can: flexcan: Always use last mailbox for TX Essentially this patch moves the TX mailbox to position 63, regardless of timestamp based offloading or RX FIFO. So mainly the iflag register usage regarding TX has changed. The rest is consolidating RX FIFO and timestamp offloading as they now use both the same TX mailbox. The reason is a very annoying behavior regarding sending RTR frames when _not_ using RX FIFO: If a TX mailbox sent a RTR frame it becomes a RX mailbox. For that reason flexcan_irq disables the TX mailbox again. But if during the time the RTR was sent and the TX mailbox is disabled a new CAN frames is received, it is lost without notice. The reason is that so-called "Move-in" process starts from the lowest mailbox which happen to be a TX mailbox set to EMPTY. Steps to reproduce (I used an imx7d): 1. generate regular bursts of messages 2. send a RTR from flexcan with higher priority than burst messages every 1ms, e.g. cangen -I 0x100 -L 0 -g 1 -R can0 3. notice a lost message without notification after some seconds When running an iperf in parallel this problem is occurring even more frequently. Using filters is not possible as at least one single CAN-ID is allowed. Handling the TX MB during RX is also not possible as there is no race-free disable of RX MB. There is still a slight window when the described problem can occur. But for that all RX MB must be in use which is essentially next to an overrun. Still there will be no indication if it ever occurs. Signed-off-by: Alexander Stein <alexander.stein(a)systec-electronic.com> Cc: linux-stable <stable(a)vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 0431f8d05518..677c41701cf3 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -135,13 +135,12 @@ /* FLEXCAN interrupt flag register (IFLAG) bits */ /* Errata ERR005829 step7: Reserve first valid MB */ -#define FLEXCAN_TX_MB_RESERVED_OFF_FIFO 8 -#define FLEXCAN_TX_MB_OFF_FIFO 9 +#define FLEXCAN_TX_MB_RESERVED_OFF_FIFO 8 #define FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP 0 -#define FLEXCAN_TX_MB_OFF_TIMESTAMP 1 -#define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST (FLEXCAN_TX_MB_OFF_TIMESTAMP + 1) -#define FLEXCAN_RX_MB_OFF_TIMESTAMP_LAST 63 -#define FLEXCAN_IFLAG_MB(x) BIT(x) +#define FLEXCAN_TX_MB 63 +#define FLEXCAN_RX_MB_OFF_TIMESTAMP_FIRST (FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP + 1) +#define FLEXCAN_RX_MB_OFF_TIMESTAMP_LAST (FLEXCAN_TX_MB - 1) +#define FLEXCAN_IFLAG_MB(x) BIT(x & 0x1f) #define FLEXCAN_IFLAG_RX_FIFO_OVERFLOW BIT(7) #define FLEXCAN_IFLAG_RX_FIFO_WARN BIT(6) #define FLEXCAN_IFLAG_RX_FIFO_AVAILABLE BIT(5) @@ -737,9 +736,9 @@ static inline u64 flexcan_read_reg_iflag_rx(struct flexcan_priv *priv) struct flexcan_regs __iomem *regs = priv->regs; u32 iflag1, iflag2; - iflag2 = priv->read(&regs->iflag2) & priv->reg_imask2_default; - iflag1 = priv->read(&regs->iflag1) & priv->reg_imask1_default & + iflag2 = priv->read(&regs->iflag2) & priv->reg_imask2_default & ~FLEXCAN_IFLAG_MB(priv->tx_mb_idx); + iflag1 = priv->read(&regs->iflag1) & priv->reg_imask1_default; return (u64)iflag2 << 32 | iflag1; } @@ -751,11 +750,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->regs; irqreturn_t handled = IRQ_NONE; - u32 reg_iflag1, reg_esr; + u32 reg_iflag2, reg_esr; enum can_state last_state = priv->can.state; - reg_iflag1 = priv->read(&regs->iflag1); - /* reception interrupt */ if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { u64 reg_iflag; @@ -769,6 +766,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) break; } } else { + u32 reg_iflag1; + + reg_iflag1 = priv->read(&regs->iflag1); if (reg_iflag1 & FLEXCAN_IFLAG_RX_FIFO_AVAILABLE) { handled = IRQ_HANDLED; can_rx_offload_irq_offload_fifo(&priv->offload); @@ -784,8 +784,10 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) } } + reg_iflag2 = priv->read(&regs->iflag2); + /* transmission complete interrupt */ - if (reg_iflag1 & FLEXCAN_IFLAG_MB(priv->tx_mb_idx)) { + if (reg_iflag2 & FLEXCAN_IFLAG_MB(priv->tx_mb_idx)) { handled = IRQ_HANDLED; stats->tx_bytes += can_get_echo_skb(dev, 0); stats->tx_packets++; @@ -794,7 +796,7 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id) /* after sending a RTR frame MB is in RX mode */ priv->write(FLEXCAN_MB_CODE_TX_INACTIVE, &priv->tx_mb->can_ctrl); - priv->write(FLEXCAN_IFLAG_MB(priv->tx_mb_idx), &regs->iflag1); + priv->write(FLEXCAN_IFLAG_MB(priv->tx_mb_idx), &regs->iflag2); netif_wake_queue(dev); } @@ -936,15 +938,13 @@ static int flexcan_chip_start(struct net_device *dev) reg_mcr &= ~FLEXCAN_MCR_MAXMB(0xff); reg_mcr |= FLEXCAN_MCR_FRZ | FLEXCAN_MCR_HALT | FLEXCAN_MCR_SUPV | FLEXCAN_MCR_WRN_EN | FLEXCAN_MCR_SRX_DIS | FLEXCAN_MCR_IRMQ | - FLEXCAN_MCR_IDAM_C; + FLEXCAN_MCR_IDAM_C | FLEXCAN_MCR_MAXMB(priv->tx_mb_idx); - if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { + if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) reg_mcr &= ~FLEXCAN_MCR_FEN; - reg_mcr |= FLEXCAN_MCR_MAXMB(priv->offload.mb_last); - } else { - reg_mcr |= FLEXCAN_MCR_FEN | - FLEXCAN_MCR_MAXMB(priv->tx_mb_idx); - } + else + reg_mcr |= FLEXCAN_MCR_FEN; + netdev_dbg(dev, "%s: writing mcr=0x%08x", __func__, reg_mcr); priv->write(reg_mcr, &regs->mcr); @@ -987,16 +987,17 @@ static int flexcan_chip_start(struct net_device *dev) priv->write(reg_ctrl2, &regs->ctrl2); } - /* clear and invalidate all mailboxes first */ - for (i = priv->tx_mb_idx; i < ARRAY_SIZE(regs->mb); i++) { - priv->write(FLEXCAN_MB_CODE_RX_INACTIVE, - &regs->mb[i].can_ctrl); - } - if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { - for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) + for (i = priv->offload.mb_first; i <= priv->offload.mb_last; i++) { priv->write(FLEXCAN_MB_CODE_RX_EMPTY, &regs->mb[i].can_ctrl); + } + } else { + /* clear and invalidate unused mailboxes first */ + for (i = FLEXCAN_TX_MB_RESERVED_OFF_FIFO; i <= ARRAY_SIZE(regs->mb); i++) { + priv->write(FLEXCAN_MB_CODE_RX_INACTIVE, + &regs->mb[i].can_ctrl); + } } /* Errata ERR005829: mark first TX mailbox as INACTIVE */ @@ -1360,17 +1361,15 @@ static int flexcan_probe(struct platform_device *pdev) priv->devtype_data = devtype_data; priv->reg_xceiver = reg_xceiver; - if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) { - priv->tx_mb_idx = FLEXCAN_TX_MB_OFF_TIMESTAMP; + if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP) priv->tx_mb_reserved = &regs->mb[FLEXCAN_TX_MB_RESERVED_OFF_TIMESTAMP]; - } else { - priv->tx_mb_idx = FLEXCAN_TX_MB_OFF_FIFO; + else priv->tx_mb_reserved = &regs->mb[FLEXCAN_TX_MB_RESERVED_OFF_FIFO]; - } + priv->tx_mb_idx = FLEXCAN_TX_MB; priv->tx_mb = &regs->mb[priv->tx_mb_idx]; - priv->reg_imask1_default = FLEXCAN_IFLAG_MB(priv->tx_mb_idx); - priv->reg_imask2_default = 0; + priv->reg_imask1_default = 0; + priv->reg_imask2_default = FLEXCAN_IFLAG_MB(priv->tx_mb_idx); priv->offload.mailbox_read = flexcan_mailbox_read;

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] blk-mq: fallback to previous nr_hw_queues when updating fails" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From e01ad46d53b59720c6ae69963ee1756506954c85 Mon Sep 17 00:00:00 2001 From: Jianchao Wang <jianchao.w.wang(a)oracle.com> Date: Fri, 12 Oct 2018 18:07:28 +0800 Subject: [PATCH] blk-mq: fallback to previous nr_hw_queues when updating fails When we try to increate the nr_hw_queues, we may fail due to shortage of memory or other reason, then blk_mq_realloc_hw_ctxs stops and some entries in q->queue_hw_ctx are left with NULL. However, because queue map has been updated with new nr_hw_queues, some cpus have been mapped to hw queue which just encounters allocation failure, thus blk_mq_map_queue could return NULL. This will cause panic in following blk_mq_map_swqueue. To fix it, when increase nr_hw_queues fails, fallback to previous nr_hw_queues and post warning. At the same time, driver's .map_queues usually use completion irq affinity to map hw and cpu, fallback nr_hw_queues will cause lack of some cpu's map to hw, so use default blk_mq_map_queues to do that. Reported-by: syzbot+83e8cbe702263932d9d4(a)syzkaller.appspotmail.com Signed-off-by: Jianchao Wang <jianchao.w.wang(a)oracle.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/block/blk-mq.c b/block/blk-mq.c index 941f51380077..c2ecd64a2403 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2557,7 +2557,7 @@ static struct blk_mq_hw_ctx *blk_mq_alloc_and_init_hctx( static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set, struct request_queue *q) { - int i, j; + int i, j, end; struct blk_mq_hw_ctx **hctxs = q->queue_hw_ctx; /* protect against switching io scheduler */ @@ -2591,8 +2591,20 @@ static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set, break; } } + /* + * Increasing nr_hw_queues fails. Free the newly allocated + * hctxs and keep the previous q->nr_hw_queues. + */ + if (i != set->nr_hw_queues) { + j = q->nr_hw_queues; + end = i; + } else { + j = i; + end = q->nr_hw_queues; + q->nr_hw_queues = set->nr_hw_queues; + } - for (j = i; j < q->nr_hw_queues; j++) { + for (; j < end; j++) { struct blk_mq_hw_ctx *hctx = hctxs[j]; if (hctx) { @@ -2604,7 +2616,6 @@ static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set, } } - q->nr_hw_queues = i; mutex_unlock(&q->sysfs_lock); } @@ -2989,6 +3000,7 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, { struct request_queue *q; LIST_HEAD(head); + int prev_nr_hw_queues; lockdep_assert_held(&set->tag_list_lock); @@ -3017,10 +3029,19 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, blk_mq_sysfs_unregister(q); } + prev_nr_hw_queues = set->nr_hw_queues; set->nr_hw_queues = nr_hw_queues; blk_mq_update_queue_map(set); +fallback: list_for_each_entry(q, &set->tag_list, tag_set_list) { blk_mq_realloc_hw_ctxs(set, q); + if (q->nr_hw_queues != set->nr_hw_queues) { + pr_warn("Increasing nr_hw_queues to %d fails, fallback to %d\n", + nr_hw_queues, prev_nr_hw_queues); + set->nr_hw_queues = prev_nr_hw_queues; + blk_mq_map_queues(set); + goto fallback; + } blk_mq_map_swqueue(q); }

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] usb: xhci: Prevent bus suspend if a port connect change or" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 2f31a67f01a8beb22cae754c53522cb61a005750 Mon Sep 17 00:00:00 2001 From: Mathias Nyman <mathias.nyman(a)linux.intel.com> Date: Thu, 15 Nov 2018 11:38:41 +0200 Subject: [PATCH] usb: xhci: Prevent bus suspend if a port connect change or polling state is detected USB3 roothub might autosuspend before a plugged USB3 device is detected, causing USB3 device enumeration failure. USB3 devices don't show up as connected and enabled until USB3 link trainig completes. On a fast booting platform with a slow USB3 link training the link might reach the connected enabled state just as the bus is suspending. If this device is discovered first time by the xhci_bus_suspend() routine it will be put to U3 suspended state like the other ports which failed to suspend earlier. The hub thread will notice the connect change and resume the bus, moving the port back to U0 This U0 -> U3 -> U0 transition right after being connected seems to be too much for some devices, causing them to first go to SS.Inactive state, and finally end up stuck in a polling state with reset asserted Fix this by failing the bus suspend if a port has a connect change or is in a polling state in xhci_bus_suspend(). Don't do any port changes until all ports are checked, buffer all port changes and only write them in the end if suspend can proceed Cc: stable(a)vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index da98a11244e2..94aca1b5ac8a 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -1474,15 +1474,18 @@ int xhci_bus_suspend(struct usb_hcd *hcd) unsigned long flags; struct xhci_hub *rhub; struct xhci_port **ports; + u32 portsc_buf[USB_MAXCHILDREN]; + bool wake_enabled; rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; + wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (bus_state->resuming_ports || /* USB2 */ bus_state->port_remote_wakeup) { /* USB3 */ spin_unlock_irqrestore(&xhci->lock, flags); @@ -1490,26 +1493,36 @@ int xhci_bus_suspend(struct usb_hcd *hcd) return -EBUSY; } } - - port_index = max_ports; + /* + * Prepare ports for suspend, but don't write anything before all ports + * are checked and we know bus suspend can proceed + */ bus_state->bus_suspended = 0; + port_index = max_ports; while (port_index--) { - /* suspend the port if the port is not suspended */ u32 t1, t2; - int slot_id; t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); + portsc_buf[port_index] = 0; - if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { - xhci_dbg(xhci, "port %d not suspended\n", port_index); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - port_index + 1); - if (slot_id) { + /* Bail out if a USB3 port has a new device in link training */ + if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) { + bus_state->bus_suspended = 0; + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); + return -EBUSY; + } + + /* suspend ports in U0, or bail out for new connect changes */ + if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { + if ((t1 & PORT_CSC) && wake_enabled) { + bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); - xhci_stop_device(xhci, slot_id, 1); - spin_lock_irqsave(&xhci->lock, flags); + xhci_dbg(xhci, "Bus suspend bailout, port connect change\n"); + return -EBUSY; } + xhci_dbg(xhci, "port %d not suspended\n", port_index); t2 &= ~PORT_PLS_MASK; t2 |= PORT_LINK_STROBE | XDEV_U3; set_bit(port_index, &bus_state->bus_suspended); @@ -1518,7 +1531,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * including the USB 3.0 roothub, but only if CONFIG_PM * is enabled, so also enable remote wake here. */ - if (hcd->self.root_hub->do_remote_wakeup) { + if (wake_enabled) { if (t1 & PORT_CONNECT) { t2 |= PORT_WKOC_E | PORT_WKDISC_E; t2 &= ~PORT_WKCONN_E; @@ -1538,7 +1551,26 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, ports[port_index]->addr); + portsc_buf[port_index] = t2; + } + + /* write port settings, stopping and suspending ports if needed */ + port_index = max_ports; + while (port_index--) { + if (!portsc_buf[port_index]) + continue; + if (test_bit(port_index, &bus_state->bus_suspended)) { + int slot_id; + + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); + if (slot_id) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_stop_device(xhci, slot_id, 1); + spin_lock_irqsave(&xhci->lock, flags); + } + } + writel(portsc_buf[port_index], ports[port_index]->addr); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10);

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] xhci: Add quirk to workaround the errata seen on Cavium" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 11644a7659529730eaf2f166efaabe7c3dc7af8c Mon Sep 17 00:00:00 2001 From: "Cherian, George" <George.Cherian(a)cavium.com> Date: Fri, 9 Nov 2018 17:21:22 +0200 Subject: [PATCH] xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc Implement workaround for ThunderX2 Errata-129 (documented in CN99XX Known Issues" available at Cavium support site). As per ThunderX2errata-129, USB 2 device may come up as USB 1 if a connection to a USB 1 device is followed by another connection to a USB 2 device, the link will come up as USB 1 for the USB 2 device. Resolution: Reset the PHY after the USB 1 device is disconnected. The PHY reset sequence is done using private registers in XHCI register space. After the PHY is reset we check for the PLL lock status and retry the operation if it fails. From our tests, retrying 4 times is sufficient. Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround in handle_xhci_port_status(). Cc: stable(a)vger.kernel.org Signed-off-by: George Cherian <george.cherian(a)cavium.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1fb448cd2667..a9515265db4d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -248,6 +248,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; + if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM || + pdev->vendor == PCI_VENDOR_ID_CAVIUM) && + pdev->device == 0x9026) + xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 250b758efe9f..65750582133f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1521,6 +1521,35 @@ static void handle_device_notification(struct xhci_hcd *xhci, usb_wakeup_notification(udev->parent, udev->portnum); } +/* + * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI + * Controller. + * As per ThunderX2errata-129 USB 2 device may come up as USB 1 + * If a connection to a USB 1 device is followed by another connection + * to a USB 2 device. + * + * Reset the PHY after the USB device is disconnected if device speed + * is less than HCD_USB3. + * Retry the reset sequence max of 4 times checking the PLL lock status. + * + */ +static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci) +{ + struct usb_hcd *hcd = xhci_to_hcd(xhci); + u32 pll_lock_check; + u32 retry_count = 4; + + do { + /* Assert PHY reset */ + writel(0x6F, hcd->regs + 0x1048); + udelay(10); + /* De-assert the PHY reset */ + writel(0x7F, hcd->regs + 0x1048); + udelay(200); + pll_lock_check = readl(hcd->regs + 0x1070); + } while (!(pll_lock_check & 0x1) && --retry_count); +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1654,8 +1683,12 @@ static void handle_port_status(struct xhci_hcd *xhci, goto cleanup; } - if (hcd->speed < HCD_USB3) + if (hcd->speed < HCD_USB3) { xhci_test_and_clear_bit(xhci, port, PORT_PLC); + if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) && + (portsc & PORT_CSC) && !(portsc & PORT_CONNECT)) + xhci_cavium_reset_phy_quirk(xhci); + } cleanup: /* Update event ring dequeue pointer before dropping the lock */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 5f0c4f197f13..260b259b72bc 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1849,6 +1849,7 @@ struct xhci_hcd { #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) #define XHCI_ZERO_64B_REGS BIT_ULL(32) #define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33) +#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) unsigned int num_active_eps; unsigned int limit_active_eps;

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] usb: xhci: fix uninitialized completion when USB3 port got" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 958c0bd86075d4ef1c936998deefe1947e539240 Mon Sep 17 00:00:00 2001 From: Aaron Ma <aaron.ma(a)canonical.com> Date: Fri, 9 Nov 2018 17:21:20 +0200 Subject: [PATCH] usb: xhci: fix uninitialized completion when USB3 port got wrong status Realtek USB3.0 Card Reader [0bda:0328] reports wrong port status on Cannon lake PCH USB3.1 xHCI [8086:a36d] after resume from S3, after clear port reset it works fine. Since this device is registered on USB3 roothub at boot, when port status reports not superspeed, xhci_get_port_status will call an uninitialized completion in bus_state[0]. Kernel will hang because of NULL pointer. Restrict the USB2 resume status check in USB2 roothub to fix hang issue. Cc: stable(a)vger.kernel.org Signed-off-by: Aaron Ma <aaron.ma(a)canonical.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 12eea73d9f20..60e4ac7ae4f8 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -876,7 +876,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_SUSPEND; } if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status)) { + !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { if ((raw_port_status & PORT_RESET) || !(raw_port_status & PORT_PE)) return 0xffffffff; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 730a6ecd85fc..250b758efe9f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1646,7 +1646,7 @@ static void handle_port_status(struct xhci_hcd *xhci, * RExit to a disconnect state). If so, let the the driver know it's * out of the RExit state. */ - if (!DEV_SUPERSPEED_ANY(portsc) && + if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 && test_and_clear_bit(hcd_portnum, &bus_state->rexit_ports)) { complete(&bus_state->rexit_done[hcd_portnum]);

6 years, 9 months

1
0
0 0

4.14 patches for arm32 clang

by Nick Desaulniers

Greg, Please see the attached mbox of 5 patches. The first required a slight backport as noted in the commit message, but the others applied cleanly. Here's a build+boot of them in clang: https://travis-ci.com/ClangBuiltLinux/continuous-integration/builds/92778054 (obviously we need to backport warning cleanups, but this set gets it booting at least) -- Thanks, ~Nick Desaulniers

6 years, 9 months

2
1
0 0

[PATCH] efi/libstub: arm: support building with clang

by ndesaulniers＠google.com

From: Alistair Strachan <astrachan(a)google.com> (commit 41f1c48420709470c51ee0e54b6fb28b956bb4e0 upstream) When building with CONFIG_EFI and CONFIG_EFI_STUB on ARM, the libstub Makefile would use -mno-single-pic-base without checking it was supported by the compiler. As the ARM (32-bit) clang backend does not support this flag, the build would fail. This changes the Makefile to check the compiler's support for -mno-single-pic-base before using it, similar to c1c386681bd7 ("ARM: 8767/1: add support for building ARM kernel with clang"). Signed-off-by: Alistair Strachan <astrachan(a)google.com> Reviewed-by: Stefan Agner <stefan(a)agner.ch> Signed-off-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Signed-off-by: Nick Desaulniers <ndesaulniers(a)google.com> --- Please land in 4.19, 4.18. I'm preparing backports for 4.9 and 4.4 I will send today or tomorrow. This is for building the Linux kernel for arm32 with Clang. drivers/firmware/efi/libstub/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile index 14c40a7750d1..c51627660dbb 100644 --- a/drivers/firmware/efi/libstub/Makefile +++ b/drivers/firmware/efi/libstub/Makefile @@ -16,7 +16,8 @@ cflags-$(CONFIG_X86) += -m$(BITS) -D__KERNEL__ -O2 \ cflags-$(CONFIG_ARM64) := $(subst -pg,,$(KBUILD_CFLAGS)) -fpie \ $(DISABLE_STACKLEAK_PLUGIN) cflags-$(CONFIG_ARM) := $(subst -pg,,$(KBUILD_CFLAGS)) \ - -fno-builtin -fpic -mno-single-pic-base + -fno-builtin -fpic \ + $(call cc-option,-mno-single-pic-base) cflags-$(CONFIG_EFI_ARMSTUB) += -I$(srctree)/scripts/dtc/libfdt -- 2.20.0.rc0.387.gc7a69e6b6c-goog

6 years, 9 months

2
1
0 0

[RFC PATCH] btrfs: drop file privileges in btrfs_clone_files

by Lu Fengqi

The generic/513 tell that cloning into a file did not strip security privileges (suid, capabilities) like a regular write would. Signed-off-by: Lu Fengqi <lufq.fnst(a)cn.fujitsu.com> --- The xfs and ocfs2 call generic_remap_file_range_prep to drop file privileges, I'm not sure whether btrfs should do the same thing. Any suggestion? fs/btrfs/ioctl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 410c7e007ba8..bc33c480603b 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -4312,6 +4312,10 @@ static noinline int btrfs_clone_files(struct file *file, struct file *file_src, goto out_unlock; } + ret = file_remove_privs(file); + if (ret) + goto out_unlock; + if (destoff > inode->i_size) { ret = btrfs_cont_expand(inode, inode->i_size, destoff); if (ret) -- 2.19.2

6 years, 9 months

1
1
0 0

stable-rc/linux-4.4.y boot: 89 boots: 1 failed, 87 passed with 1 offline (v4.4.165)

by kernelci.org bot

stable-rc/linux-4.4.y boot: 89 boots: 1 failed, 87 passed with 1 offline (v4.4.165) Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.… Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.165/ Tree: stable-rc Branch: linux-4.4.y Git Describe: v4.4.165 Git Commit: 2757e11be64bcfcba65ff885e08a5b6067a8e394 Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Tested: 43 unique boards, 20 SoC families, 15 builds out of 187 Boot Failure Detected: arm64: defconfig qcom-qdf2400: 1 failed lab Offline Platforms: arm: multi_v7_defconfig: stih410-b2120: 1 offline lab --- For more info write to <info(a)kernelci.org>

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror