From: DENG Qingfang dqfext@gmail.com
commit 342afce10d6f61c443c95e244f812d4766f73f53 upstream.
Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary dsa_port's and call mt7530_port_disable for non-existent ports.
Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in port_enable/disable is no longer required.
Cc: stable@vger.kernel.org Signed-off-by: DENG Qingfang dqfext@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/mt7530.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
--- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1031,9 +1031,6 @@ mt7530_port_enable(struct dsa_switch *ds { struct mt7530_priv *priv = ds->priv;
- if (!dsa_is_user_port(ds, port)) - return 0; - mutex_lock(&priv->reg_mutex);
/* Allow the user port gets connected to the cpu port and also @@ -1056,9 +1053,6 @@ mt7530_port_disable(struct dsa_switch *d { struct mt7530_priv *priv = ds->priv;
- if (!dsa_is_user_port(ds, port)) - return; - mutex_lock(&priv->reg_mutex);
/* Clear up all port matrix which could be restored in the next @@ -3132,7 +3126,7 @@ mt7530_probe(struct mdio_device *mdiodev return -ENOMEM;
priv->ds->dev = &mdiodev->dev; - priv->ds->num_ports = DSA_MAX_PORTS; + priv->ds->num_ports = MT7530_NUM_PORTS;
/* Use medatek,mcm property to distinguish hardware type that would * casues a little bit differences on power-on sequence.