From: Fabrice Gasnier fabrice.gasnier@foss.st.com
[ Upstream commit 1d0c1aadf1fd9f3de95d1532b3651e8634546e71 ]
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be initialized first, before enabling (gating) them. The reverse is also required when going to suspend. So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL gets enabled 1st upon controller init. Upon suspend/resume, this also makes the clock to be disabled/re-enabled in the correct order. This fixes some IRQ storm conditions seen when going to low-power, due to PHY PLL being disabled before all clocks are cleanly gated.
Fixes: 949a0c0dec85 ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c") Fixes: db7be2cb87ae ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151") Signed-off-by: Fabrice Gasnier fabrice.gasnier@foss.st.com Signed-off-by: Alexandre Torgue alexandre.torgue@foss.st.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/stm32mp151.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index f693a7d24247..a9b65b3bfda5 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1452,7 +1452,7 @@ usbh_ohci: usb@5800c000 { compatible = "generic-ohci"; reg = <0x5800c000 0x1000>; - clocks = <&rcc USBH>, <&usbphyc>; + clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -1461,7 +1461,7 @@ usbh_ehci: usb@5800d000 { compatible = "generic-ehci"; reg = <0x5800d000 0x1000>; - clocks = <&rcc USBH>; + clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; companion = <&usbh_ohci>;