From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit 6daae00243e622dd3feec7965bfe421ad6dd317e ]
Gigabit Ethernet requires the Ethernet TXD0..3 and RXD0..3 data lines. Add the missing eth_rxd2 and eth_rxd3 definitions so we don't have to rely on the bootloader to set them up correctly.
The vendor u-boot sources for Odroid-C1 use the following Ethernet pinmux configuration: SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_6, 0x3f4f); SET_CBUS_REG_MASK(PERIPHS_PIN_MUX_7, 0xf00000); This translates to the following pin groups in the mainline kernel: - register 6 bit 0: eth_rxd1 (DIF_0_P) - register 6 bit 1: eth_rxd0 (DIF_0_N) - register 6 bit 2: eth_rx_dv (DIF_1_P) - register 6 bit 3: eth_rx_clk (DIF_1_N) - register 6 bit 6: eth_tx_en (DIF_3_P) - register 6 bit 8: eth_ref_clk (DIF_3_N) - register 6 bit 9: eth_mdc (DIF_4_P) - register 6 bit 10: eth_mdio_en (DIF_4_N) - register 6 bit 11: eth_tx_clk (GPIOH_9) - register 6 bit 12: eth_txd2 (GPIOH_8) - register 6 bit 13: eth_txd3 (GPIOH_7) - register 7 bit 20: eth_txd0_0 (GPIOH_6) - register 7 bit 21: eth_txd1_0 (GPIOH_5) - register 7 bit 22: eth_rxd3 (DIF_2_P) - register 7 bit 23: eth_rxd2 (DIF_2_N)
All functions except eth_rxd2 and eth_rxd3 are already supported by the pinctrl-meson8b driver.
Suggested-by: Jianxin Pan jianxin.pan@amlogic.com Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Reviewed-by: Kevin Hilman khilman@baylibre.com Tested-by: Emiliano Ingrassia ingrassia@epigenesys.com Reviewed-by: Emiliano Ingrassia ingrassia@epigenesys.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/meson/pinctrl-meson8b.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c index 0f140a802137..7f76000cc12e 100644 --- a/drivers/pinctrl/meson/pinctrl-meson8b.c +++ b/drivers/pinctrl/meson/pinctrl-meson8b.c @@ -346,6 +346,8 @@ static const unsigned int eth_rx_dv_pins[] = { DIF_1_P }; static const unsigned int eth_rx_clk_pins[] = { DIF_1_N }; static const unsigned int eth_txd0_1_pins[] = { DIF_2_P }; static const unsigned int eth_txd1_1_pins[] = { DIF_2_N }; +static const unsigned int eth_rxd3_pins[] = { DIF_2_P }; +static const unsigned int eth_rxd2_pins[] = { DIF_2_N }; static const unsigned int eth_tx_en_pins[] = { DIF_3_P }; static const unsigned int eth_ref_clk_pins[] = { DIF_3_N }; static const unsigned int eth_mdc_pins[] = { DIF_4_P }; @@ -599,6 +601,8 @@ static struct meson_pmx_group meson8b_cbus_groups[] = { GROUP(eth_ref_clk, 6, 8), GROUP(eth_mdc, 6, 9), GROUP(eth_mdio_en, 6, 10), + GROUP(eth_rxd3, 7, 22), + GROUP(eth_rxd2, 7, 23), };
static struct meson_pmx_group meson8b_aobus_groups[] = { @@ -748,7 +752,7 @@ static const char * const ethernet_groups[] = { "eth_tx_clk", "eth_tx_en", "eth_txd1_0", "eth_txd1_1", "eth_txd0_0", "eth_txd0_1", "eth_rx_clk", "eth_rx_dv", "eth_rxd1", "eth_rxd0", "eth_mdio_en", "eth_mdc", "eth_ref_clk", - "eth_txd2", "eth_txd3" + "eth_txd2", "eth_txd3", "eth_rxd3", "eth_rxd2" };
static const char * const i2c_a_groups[] = {