5.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner lukas@wunner.de
[ Upstream commit bba047f15851c8b053221f1b276eb7682d59f755 ]
The Marvell SD8978 (aka NXP IW416) uses identical registers as SD8987, so reuse the existing mwifiex_reg_sd8987 definition.
Note that mwifiex_reg_sd8977 and mwifiex_reg_sd8997 are likewise identical, save for the fw_dump_ctrl register: They define it as 0xf0 whereas mwifiex_reg_sd8987 defines it as 0xf9. I've verified that 0xf9 is the correct value on SD8978. NXP's out-of-tree driver uses 0xf9 for all of them, so there's a chance that 0xf0 is not correct in the mwifiex_reg_sd8977 and mwifiex_reg_sd8997 definitions. I cannot test that for lack of hardware, hence am leaving it as is.
NXP has only released a firmware which runs Bluetooth over UART. Perhaps Bluetooth over SDIO is unsupported by this chipset. Consequently, only an "sdiouart" firmware image is referenced, not an alternative "sdsd" image.
Signed-off-by: Lukas Wunner lukas@wunner.de Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/536b4f17a72ca460ad1b07045757043fb0778988.167482710... Stable-dep-of: 1c5d463c0770 ("wifi: mwifiex: add extra delay for firmware ready") Signed-off-by: Sasha Levin sashal@kernel.org --- .../bindings/net/wireless/marvell-8xxx.txt | 4 ++- drivers/net/wireless/marvell/mwifiex/Kconfig | 5 ++-- drivers/net/wireless/marvell/mwifiex/sdio.c | 25 +++++++++++++++++-- drivers/net/wireless/marvell/mwifiex/sdio.h | 1 + include/linux/mmc/sdio_ids.h | 1 + 5 files changed, 31 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt index 9bf9bbac16e2..cdc303caf5f4 100644 --- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt +++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt @@ -1,4 +1,4 @@ -Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices +Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices ------
This node provides properties for controlling the Marvell SDIO/PCIE wireless device. @@ -10,7 +10,9 @@ Required properties: - compatible : should be one of the following: * "marvell,sd8787" * "marvell,sd8897" + * "marvell,sd8978" * "marvell,sd8997" + * "nxp,iw416" * "pci11ab,2b42" * "pci1b4b,2b42"
diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig index 2b4ff2b78a7e..b182f7155d66 100644 --- a/drivers/net/wireless/marvell/mwifiex/Kconfig +++ b/drivers/net/wireless/marvell/mwifiex/Kconfig @@ -10,13 +10,14 @@ config MWIFIEX mwifiex.
config MWIFIEX_SDIO - tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997" + tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8978/SD8987/SD8997" depends on MWIFIEX && MMC select FW_LOADER select WANT_DEV_COREDUMP help This adds support for wireless adapters based on Marvell - 8786/8787/8797/8887/8897/8977/8987/8997 chipsets with SDIO interface. + 8786/8787/8797/8887/8897/8977/8978/8987/8997 chipsets with + SDIO interface. SD8978 is also known as NXP IW416.
If you choose to build it as a module, it will be called mwifiex_sdio. diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c index 016065a56e6c..919f1bae61dc 100644 --- a/drivers/net/wireless/marvell/mwifiex/sdio.c +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c @@ -275,7 +275,7 @@ static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8887 = { 0x68, 0x69, 0x6a}, };
-static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8987 = { +static const struct mwifiex_sdio_card_reg mwifiex_reg_sd89xx = { .start_rd_port = 0, .start_wr_port = 0, .base_0_reg = 0xF8, @@ -406,6 +406,22 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8977 = { .can_ext_scan = true, };
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8978 = { + .firmware_sdiouart = SD8978_SDIOUART_FW_NAME, + .reg = &mwifiex_reg_sd89xx, + .max_ports = 32, + .mp_agg_pkt_limit = 16, + .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K, + .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX, + .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX, + .supports_sdio_new_mode = true, + .has_control_mask = false, + .can_dump_fw = true, + .fw_dump_enh = true, + .can_auto_tdls = false, + .can_ext_scan = true, +}; + static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = { .firmware = SD8997_DEFAULT_FW_NAME, .reg = &mwifiex_reg_sd8997, @@ -439,7 +455,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
static const struct mwifiex_sdio_device mwifiex_sdio_sd8987 = { .firmware = SD8987_DEFAULT_FW_NAME, - .reg = &mwifiex_reg_sd8987, + .reg = &mwifiex_reg_sd89xx, .max_ports = 32, .mp_agg_pkt_limit = 16, .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K, @@ -493,7 +509,9 @@ static struct memory_type_mapping mem_type_mapping_tbl[] = { static const struct of_device_id mwifiex_sdio_of_match_table[] __maybe_unused = { { .compatible = "marvell,sd8787" }, { .compatible = "marvell,sd8897" }, + { .compatible = "marvell,sd8978" }, { .compatible = "marvell,sd8997" }, + { .compatible = "nxp,iw416" }, { } };
@@ -931,6 +949,8 @@ static const struct sdio_device_id mwifiex_ids[] = { .driver_data = (unsigned long)&mwifiex_sdio_sd8801}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977_WLAN), .driver_data = (unsigned long)&mwifiex_sdio_sd8977}, + {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8978_WLAN), + .driver_data = (unsigned long)&mwifiex_sdio_sd8978}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8987_WLAN), .driver_data = (unsigned long)&mwifiex_sdio_sd8987}, {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997_WLAN), @@ -3175,5 +3195,6 @@ MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME); +MODULE_FIRMWARE(SD8978_SDIOUART_FW_NAME); MODULE_FIRMWARE(SD8987_DEFAULT_FW_NAME); MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME); diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h index ad2c28cbb630..e9a9de566cc8 100644 --- a/drivers/net/wireless/marvell/mwifiex/sdio.h +++ b/drivers/net/wireless/marvell/mwifiex/sdio.h @@ -37,6 +37,7 @@ #define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin" #define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin" #define SD8977_DEFAULT_FW_NAME "mrvl/sdsd8977_combo_v2.bin" +#define SD8978_SDIOUART_FW_NAME "mrvl/sdiouartiw416_combo_v0.bin" #define SD8987_DEFAULT_FW_NAME "mrvl/sd8987_uapsta.bin" #define SD8997_DEFAULT_FW_NAME "mrvl/sdsd8997_combo_v4.bin"
diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index a85c9f0bd470..d1524c5e49a1 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -101,6 +101,7 @@ #define SDIO_DEVICE_ID_MARVELL_8977_BT 0x9146 #define SDIO_DEVICE_ID_MARVELL_8987_WLAN 0x9149 #define SDIO_DEVICE_ID_MARVELL_8987_BT 0x914a +#define SDIO_DEVICE_ID_MARVELL_8978_WLAN 0x9159
#define SDIO_VENDOR_ID_MEDIATEK 0x037a #define SDIO_DEVICE_ID_MEDIATEK_MT7663 0x7663