From: Johan Hovold johan@kernel.org
commit 8c8171929116cc23f74743d99251eedadf62341a upstream.
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.
Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold johan@kernel.org Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/host/vub300.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -579,7 +579,7 @@ static void check_vub300_port_status(str GET_SYSTEM_PORT_STATUS, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, 0x0000, &vub300->system_port_status, - sizeof(vub300->system_port_status), HZ); + sizeof(vub300->system_port_status), 1000); if (sizeof(vub300->system_port_status) == retval) new_system_port_status(vub300); } @@ -1242,7 +1242,7 @@ static void __download_offload_pseudocod SET_INTERRUPT_PSEUDOCODE, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, 0x0000, - xfer_buffer, xfer_length, HZ); + xfer_buffer, xfer_length, 1000); kfree(xfer_buffer); if (retval < 0) { strncpy(vub300->vub_name, @@ -1289,7 +1289,7 @@ static void __download_offload_pseudocod SET_TRANSFER_PSEUDOCODE, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, 0x0000, - xfer_buffer, xfer_length, HZ); + xfer_buffer, xfer_length, 1000); kfree(xfer_buffer); if (retval < 0) { strncpy(vub300->vub_name, @@ -1994,7 +1994,7 @@ static void __set_clock_speed(struct vub usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), SET_CLOCK_SPEED, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x00, 0x00, buf, buf_array_size, HZ); + 0x00, 0x00, buf, buf_array_size, 1000); if (retval != 8) { dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED" " %dkHz failed with retval=%d\n", kHzClock, retval); @@ -2016,14 +2016,14 @@ static void vub300_mmc_set_ios(struct mm usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), SET_SD_POWER, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0000, 0x0000, NULL, 0, HZ); + 0x0000, 0x0000, NULL, 0, 1000); /* must wait for the VUB300 u-proc to boot up */ msleep(600); } else if ((ios->power_mode == MMC_POWER_UP) && !vub300->card_powered) { usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), SET_SD_POWER, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - 0x0001, 0x0000, NULL, 0, HZ); + 0x0001, 0x0000, NULL, 0, 1000); msleep(600); vub300->card_powered = 1; } else if (ios->power_mode == MMC_POWER_ON) { @@ -2285,14 +2285,14 @@ static int vub300_probe(struct usb_inter GET_HC_INF0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, 0x0000, &vub300->hc_info, - sizeof(vub300->hc_info), HZ); + sizeof(vub300->hc_info), 1000); if (retval < 0) goto error5; retval = usb_control_msg(vub300->udev, usb_sndctrlpipe(vub300->udev, 0), SET_ROM_WAIT_STATES, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - firmware_rom_wait_states, 0x0000, NULL, 0, HZ); + firmware_rom_wait_states, 0x0000, NULL, 0, 1000); if (retval < 0) goto error5; dev_info(&vub300->udev->dev, @@ -2307,7 +2307,7 @@ static int vub300_probe(struct usb_inter GET_SYSTEM_PORT_STATUS, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x0000, 0x0000, &vub300->system_port_status, - sizeof(vub300->system_port_status), HZ); + sizeof(vub300->system_port_status), 1000); if (retval < 0) { goto error4; } else if (sizeof(vub300->system_port_status) == retval) {