[BACKPORT 4.19.y 0/3] Candidate from TI 4.19 product kernel

-- 2.17.1 100 100 78eccc2ac98e arm64: dts: ti: k3-j721e: Add the MCU SRAM node 73 100 073086fc68d7 arm64: dts: ti: k3-j721e: Add interrupt controllers in main domain 77 100 1463a70dfc87 arm64: dts: ti: k3-j721e-main: Add Main NavSS Interrupt controller node 100 100 3cd277c6d021 arm64: defconfig: Enable TI's J721E SoC platform 97 100 803d3a1870e2 arm64: dts: ti: Add support for J721E Common Processor Board 100 100 cff377f7897a soc: ti: Add Support for J721E SoC config option 92 100 2d87061e70de arm64: dts: ti: Add Support for J721E SoC 100 100 e28c6d941dac dt-bindings: serial: 8250_omap: Add compatible for J721E UART controller 100 100 7c42f43c29e2 dt-bindings: arm: ti: Add bindings for J721E SoC 84 100 30eb8ea46cc6 arm64: dts: k3-am6: Add PCIe Endpoint DT node 41 100 cedc255cc6fe arm64: dts: k3-am6: Add SERDES DT node 100 100 4b4ffc6e1f66 arm64: dts: k3-am6: Add "socionext,synquacer-pre-its" property to gic_its 100 100 833123386c69 arm64: dts: ti: k3-am65: Add R5F ranges in interconnect nodes 75 100 f853f0053164 arm64: dts: ti: k3-am65-mcu: Add the MCU RAM node 100 100 0ded541218d1 arm64: dts: ti: k3-am65: Add MCU SRAM ranges in interconnect nodes 100 100 c67f7388a62e arm64: dts: ti: am654-base-board: Add gpio_keys node 69 53 fa42da11b285 firmware: ti_sci: Parse all resource ranges even if some is not available 35 100 1e407f337f40 firmware: ti_sci: Add support for processor control 86 100 68608b5e5063 firmware: ti_sci: Add resource management APIs for ringacc, psi-l and udma 100 100 66f030eac257 firmware: ti_sci: Always request response from firmware 100 100 541e4095f388 gpio: davinci: silence error prints in case of EPROBE_DEFER 100 100 d4d98bba3ea5 hwspinlock/omap: Add a trace during probe 100 100 6fa154e282f9 hwspinlock/omap: Add support for TI K3 SoCs 100 100 7f40c260df86 dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs 100 100 81f4458c9c69 firmware: ti_sci: extend clock identifiers from u8 to u32 94 94 3f1f22d80090 clk: keystone: sci-clk: extend clock IDs to 32 bits 30 100 8e48b33f9def clk: keystone: sci-clk: probe clocks from DT instead of firmware 88 100 4bfce5aba902 clk: keystone: sci-clk: split out the fw clock parsing to own function 100 100 96488c09b0f4 clk: keystone: sci-clk: cut down the clock name length 100 100 b1622cb3be45 drm/bridge: tfp410: fix use of cancel_delayed_work_sync 100 100 c08f99c39083 drm/bridge: tfp410: fix memleak in get_modes() 56 98 ff5781634c41 drm/bridge: sii902x: Implement HDMI audio support 60 100 8dbfc5b65023 drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz 33 33 bceee9bb8948 drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID 100 100 9fba099b7a84 drm/bridge: sii902x: add input_bus_flags 100 100 423997fffeaf dt-bindings: tc358767: add HPD support 77 97 f25ee5017e4f drm/bridge: tc358767: add IRQ and HPD support 100 100 af9526f262c0 drm/bridge: tc358767: add GPIO & interrupt registers 100 25 46648a3cec2d drm/bridge: tc358767: copy the mode data, instead of storing the pointer 55 100 0cdb42f313e0 drm/bridge: tc358767: remove tc_connector_best_encoder 100 100 4647a64fd56a drm/bridge: tc358767: use bridge mode_valid 100 50 2792c152a845 drm/bridge: tc358767: remove check for video mode in link enable 60 100 f9538357760b drm/bridge: tc358767: clean-up link training 100 87 0bf251465113 drm/bridge: tc358767: cleanup LT result check 100 100 31b4c8848a89 drm/bridge: tc358767: remove unnecessary msleep 92 100 cb3263b2df97 drm/bridge: tc358767: add link disable function 90 100 bb24836869a7 drm/bridge: tc358767: move PXL PLL enable/disable to stream enable/disable 82 80 80d57245063f drm/bridge: tc358767: split stream enable/disable 100 100 ca342386a9b3 drm/bridge: tc358767: cleanup aux_link_setup 100 100 ab947eb65a31 drm/bridge: tc358767: remove unused swing & preemp 100 100 e5607637c461 drm/bridge: tc358767: cleanup spread & scrambler_dis 100 100 4b30bf41e11f drm/bridge: tc358767: fix ansi 8b10b use 100 100 bfb6e014c45f drm/bridge: tc358767: fix tc_aux_get_status error handling 100 100 7ad9db66fafb drm/panel: simple: Fix panel_simple_dsi_probe 87 100 b97b042a5029 drm/panel: Add OSD101T2587-53TS driver 87 100 9c1f2a5dc294 mailbox: omap: Add support for TI K3 SoCs 93 100 8c665292ec12 dt-bindings: mailbox: omap: Update bindings for TI K3 SoCs 92 100 b07079f1642c mtd: hyperbus: Add driver for TI's HyperBus memory controller 38 100 d7865933af9e dt-bindings: mtd: Add bindings for TI's AM654 HyperBus memory controller 97 100 dcc7d3446a0f mtd: Add support for HyperBus memory devices 100 100 89ebf2b8501c dt-bindings: mtd: Add binding documentation for HyperFlash 25 98 4844ef80305d mtd: cfi_cmdset_0002: Add support for polling status register 100 38 1accbced1c32 mmc: sdhci_am654: Add Support for 4 bit IP on J721E 97 62 99909b55f298 mmc: sdhci_am654: Add Support for 8 bit IP on J721E 100 77 a457b70904bb dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J721E devices. 100 100 7e24e28b79b3 mmc: sdhci_am654: Print error message if the DLL fails to lock 87 98 573aff747ee3 usb:cdns3 Fix for stuck packets in on-chip OUT buffer. 84 100 8bc1901ca7b0 usb:cdns3 Add Cadence USB3 DRD Driver 100 50 b13a3539eb2a scsi: ufs-bsg: complete ufs-bsg job only if no error 100 100 821744403913 scsi: ufs: Add error-handling of Auto-Hibernate 86 100 ee5f1042b20e scsi: ufs: Introduce ufshcd_is_auto_hibern8_supported() 100 54 9700022109b6 ASoC: pcm3168a: Add support for multi DIN/DOUT with TDM slots parameter 100 60 b5d8dffb8cc9 ASoC: pcm3168a: Rename min_frame_size to slot_width 100 69 764958f2b523 ASoC: ti: davinci-mcasp: Support for auxclk-fs-ratio 100 100 b7e47f48f119 bindings: sound: davinci-mcasp: Add support for optional auxclk-fs-ratio 83 100 9b8e8b893ff5 ASoC: pcm3168a: Implement set_tdm_slot callback 100 100 6eeea326b389 gpio: Davinci: Add K3 dependencies 100 100 36c0551976d5 gpio: davinci: Fix the compiler warning with ARM64 config enabled 100 100 009669e74813 arm64: arch_k3: Enable interrupt controller drivers 79 100 accaf1fbfb5d dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings 51 100 cd844b0715ce irqchip/ti-sci-intr: Add support for Interrupt Router driver 22 100 67d2075ad695 dt-bindings: irqchip: Introduce TISCI Interrupt router bindings 58 100 032a1ec549a7 firmware: ti_sci: Add helper apis to manage resources 100 100 754c9477ae78 firmware: ti_sci: Add RM mapping table for am654 66 100 997b001f6bb2 firmware: ti_sci: Add support for IRQ management 100 100 9c19fb6895be firmware: ti_sci: Add support for RM core ops 96 100 905c30477f4d firmware: ti_sci: Add support to get TISCI handle using of_phandle 100 100 11140cc40ddc ARM: OMAP2+: sleep43xx: Run EMIF HW leveling on resume path 100 100 6c110561eb2d memory: ti-emif-sram: Add ti_emif_run_hw_leveling for DDR3 hardware leveling 72 90 5a99ae0092fe soc: ti: pm33xx: AM437X: Add rtc_only with ddr in self-refresh support 80 100 1c6c03545089 soc: ti: pm33xx: Move the am33xx_push_sram_idle to the top 85 100 44c22a2d12a5 ARM: OMAP2+: pm33xx: Add support for rtc+ddr in self refresh mode 68 100 6256f7f7f217 rtc: OMAP: Add support for rtc-only mode 100 100 b5acec09e259 ARM: dts: dra7: Add properties to enable PCIe x2 lane mode 100 100 fbca0b284bd0 tools: PCI: Add 'h' in optstring of getopt() 88 100 5bb04b19230c misc: pci_endpoint_test: Add support to test PCI EP in AM654x 100 100 fc9a77040b04 PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size 81 76 23284ad677a9 PCI: keystone: Add support for PCIe EP in AM654x Platforms 100 100 ddf567e3d994 PCI: dwc: Add callbacks for accessing dbi2 address space 100 100 421db1ab287e PCI: dwc: Fix dw_pcie_ep_find_capability() to return correct capability offset 80 80 626961dd6d32 PCI: dwc: Add const qualifier to struct dw_pcie_ep_ops 100 100 2a9a801620ef PCI: endpoint: Add support to specify alignment for buffers allocated to BARs 82 100 fbb2de891cc4 PCI: keystone: Add support to set the max link speed from DT 100 100 40e5d614a0cd PCI: OF: Allow of_pci_get_max_link_speed() to be used by PCI Endpoint drivers 100 100 b22af42b3e57 PCI: keystone: Invoke phy_reset() API before enabling PHY 54 85 18b0415bc802 PCI: keystone: Add support for PCIe RC in AM654x Platforms 100 100 162aaa3b6cc1 dt-bindings: PCI: Add PCI RC DT binding documentation for AM654 71 66 a9f4c2d2f99e PCI: dwc: Enable iATU unroll for endpoint too 100 100 26f51e85b3b6 dt-bindings: PCI: Document "atu" reg-names 72 100 156c6fef75a4 PCI: keystone: Explicitly set the PCIe mode 100 100 1c55c4263fe7 dt-bindings: PCI: Add dt-binding to configure PCIe mode 100 100 47fe944138a6 dt-bindings: PCI: keystone: Add "reg-names" binding information 76 62 0790eb175ee0 PCI: keystone: Cleanup error_irq configuration 81 77 9afb20d600da PCI: keystone: Add start_link()/stop_link() dw_pcie_ops 83 83 fd8a44bd5b76 PCI: dwc: Remove default MSI initialization for platform specific MSI chips 67 56 dad5258999e9 PCI: dwc: Remove Keystone specific dw_pcie_host_ops 100 46 117c3b60bd53 PCI: keystone: Use Keystone specific msi_irq_chip 100 33 f6f2900ca9b7 PCI: keystone: Use hwirq to get the MSI IRQ number offset 55 75 1146c2953dcb PCI: keystone: Add separate functions for configuring MSI and legacy interrupt 100 100 efc80fb37466 pwm: tiehrpwm: Enable compilation for ARCH_K3 100 100 b54d1ed07ad8 dt-bindings: pwm: tiehrpwm: Add TI AM654 SoC specific compatible 58 33 869decd1ff19 clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices 41 83 2b1202d708fd clk: ti: dra7x: prevent non-existing clkctrl clocks from registering 100 100 e155e3883019 i2c: gpio: flag atomic capability if possible 100 100 8927fbf48124 i2c: algo: bit: add flag to whitelist atomic transfers 100 100 252fa60e7054 i2c: stu300: use xfer_atomic callback to bail out early 100 100 08960b022fb6 i2c: tegra-bpmp: convert to use new atomic callbacks 100 100 89f845a6dcd3 i2c: omap: Add the master_xfer_atomic hook 100 100 77c1e1e062b6 i2c: demux: handle the new atomic callbacks 100 100 7168bff2cfd7 i2c: mux: populate the new *_atomic callbacks 100 91 63b96983a5dd i2c: core: introduce callbacks for atomic transfers 53 46 83c42212d254 i2c: core: use I2C locking behaviour also for SMBUS 83 83 bae1d3a05a8b i2c: core: remove use of in_atomic() 100 71 5011454ee34a ASoC: pcm3168a: Enable TDM support for DSP_A/B modes 100 100 8ca5104715cf ASoC: davinci-mcasp: Fix clang warning without CONFIG_PM 100 100 0eb2766dd6f3 drm/bridge: ti-tfp410: Set the bus_format 100 80 51c7b4477c8b dt-bindings: display: tfp410: Add bus-width parameter property 100 100 3d31e2152281 drm/bridge: ti-tfp410: Fall back to HPD polling if HPD irq is not available 100 40 a0970e87b5d3 drm: Turn bus flags macros into an enum 100 77 8bf4b1621178 drm/omap: Remove panel-dpi driver 99 73 be3143d8b27f drm/omap: Remove TFP410 and DVI connector drivers 85 95 4e17763c321f drm/omap: Whitelist DT nodes to fixup with omapdss, prefix 100 64 30b71761957c drm/omap: Add support for drm_panel 88 37 79107f274b2f drm/omap: Add support for drm_bridge 100 100 1b1b5330a007 dt-bindings: display: Add OSD Displays OSD070T1718-19TS panel binding 100 100 b7b33786b7c3 dt-bindings: Add vendor prefix for OSD Displays 100 100 897dae5657e6 drm/bridge: ti-tfp410: Report input bus config through bridge timings 100 100 38c02db7e66e drm/bridge: ti-tfp410: Add support for the powerdown GPIO 100 100 60b903c3e621 drm/bridge: ti-tfp410: Set connector type based on DT connector node 91 100 2645d8d0980c dt-bindings: display: tfp410: Add bus parameters properties 62 58 88bc4178568b drm: Use new DRM_BUS_FLAG_*_(DRIVE|SAMPLE)_(POS|NEG)EDGE flags 88 46 0dbfc3966720 drm/omap: Merge omap_dss_device type and output_type fields 100 29 ce69aac84fe3 drm/omap: Simplify OF lookup of DSS devices 100 46 e5906f765c68 drm/omap: Store pixel clock instead of full mode in DPI and SDI encoders 100 62 b08644a235a4 drm/omap: venc: Use drm_display_mode natively 78 42 41322aa69195 drm/omap: Pass drm_display_mode to .check_timings() and .set_timings() 73 70 d60dfaba4225 drm/omap: venc: Simplify mode setting by caching configuration 52 52 40e5f937d50f drm/omap: venc: List both PAL and NTSC modes 90 61 46b3847d7f68 drm/omap: Add a dss device operation flag for .get_modes() 81 31 a872d5e92a67 drm/omap: Merge display .get_modes() and .get_size() operations 82 47 870e19d59f8a drm/omap: Expose DRM modes instead of timings in display devices 96 56 19b4200d8f4b drm/omap: Reverse direction of the DSS device enable/disable operations 55 88 3f3623dd0f88 drm/omap: Remove enable checks from display .enable() and .remove() 73 33 b49a2139ba67 drm/omap: Remove connection checks from display .enable() and .remove() 100 65 f8a8eabb273b drm/omap: Remove connection checks from internal encoders .enable() 79 94 b80bfc66b0ee drm/omap: Move common display enable/disable code to encoder 100 28 d2c53162f557 drm/omap: Use atomic suspend/resume helpers 81 81 d79bd6b445a2 drm/omap: venc: Remove wss_data field from venc_device structure 100 100 374805b0bd84 drm/omap: Remove unused kobj field from struct omap_dss_device 100 100 5d79ef3fcd41 drm/omap: Remove declaration of nonexisting function 100 100 8518f05a7110 drm/atomic: Constify mode argument to mode_valid_path() 100 100 ebcb8f8508c5 scsi: ufs: Fix RX_TERMINATION_FORCE_ENABLE define value 97 72 4fed62bc1c26 scsi: ufs-cdns: Add support for UFSHCI with M31 PHY 50 100 71e2f5c5c224 phy: ti: Add a new SERDES driver for TI's AM654x SoC 100 100 4df614c4ab18 phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback 71 100 fec06b2bc436 phy: core: Add *release* phy_ops invoked when the consumer relinquishes PHY 100 100 1d1bae725075 phy: ti-pipe3: Fix PCIe power up sequence 100 100 9d009d9c2062 phy: ti-pipe3: Fix SATA & USB PHY power up sequence 97 99 fdef2f9f700f phy: ti-pipe3: improve DPLL stability for SATA & USB 97 100 22940823f062 phy: ti-pipe3: Introduce mode property in driver data 80 100 a71a18f24d26 net: ethernet: ti: cpsw: introduce mac sl module api 100 100 e374e87538f4 mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes 94 100 5c41ea6d5200 mmc: sdhci-omap: Don't finish_mrq() on a command error during tuning 91 100 60b8f0ddf1a9 clk: Add (devm_)clk_get_optional() functions 100 33 5c17f87abb1a scsi: ufs-bsg: Allow reading descriptors 100 40 4bbbe2421634 scsi: ufs: Allow reading descriptor via raw upiu 100 77 35ce0d7922d6 PCI: endpoint: Remove features member in struct pci_epc 100 100 92f2b028418c PCI: designware-plat: Remove setting epc->features in Designware plat EP driver 100 100 f1267978457e PCI: rockchip: Remove pci_epf_linkup() from Rockchip EP driver 83 100 c274c9f4ea75 PCI: cadence: Remove pci_epf_linkup() from Cadence EP driver 90 97 2c04c5b8eef7 PCI: pci-epf-test: Use pci_epc_get_features() to get EPC features 100 100 b866c56b66d8 PCI: pci-epf-test: Do not allocate next BARs memory if current BAR is 64Bit 50 100 0342e9a797db PCI: pci-epf-test: Remove setting epf_bar flags in function driver 100 100 5544d67ed112 PCI: endpoint: Fix pci_epf_alloc_space() to set correct MEM TYPE flags 100 100 1e9efe6c9976 PCI: endpoint: Add helper to get first unreserved BAR 53 100 67c777e6015d PCI: cadence: Populate ->get_features() cdns_pcie_epc_ops 84 100 146221768c74 PCI: rockchip: Populate ->get_features() dw_pcie_ep_ops 100 100 4894467e7861 PCI: pci-dra7xx: Populate ->get_features() dw_pcie_ep_ops 100 100 3b4322e589a6 PCI: designware-plat: Populate ->get_features() dw_pcie_ep_ops 84 100 fee35cb76a54 PCI: dwc: Add ->get_features() callback function to dw_pcie_ep_ops 69 100 41cb8d189c9d PCI: endpoint: Add new pci_epc_ops to get EPC features 100 100 c232c0df9610 PCI: dwc: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x 100 100 1c5d2cc7196c dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7 100 100 33d5c207a9ed dt-bindings: PCI: dra7xx: Add SoC specific compatible strings 100 100 7945f929f1a7 drivers: provide devm_platform_ioremap_resource() 100 100 432973fd3a20 drm/tilcdc: Register cpufreq notifier after we have initialized crtc 111 111 c39ff7ea7805 drm: omapdrm: Cleanup drm_display_mode print str 100 100 b962a12050a3 drm/atomic: integrate modeset lock with private objects 100 100 1381a5113caf usb: dwc3: debug: purge usage of strcat 36 100 7790b3556fcc usb: dwc3: trace: pass trace buffer size to decoding functions 100 100 eca6b49430c6 usb: dwc3: keystone: Add support for ti,am654-dwc3 100 100 d26c05781e08 dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support 100 100 6777cee3a872 phy: ti: usb2: Add support for AM654 USB2 PHY 100 100 e712792ec0dd dt-bindings: phy: ti: Add support for AM654x USB2 PHY 100 100 266744faec8c phy: ti: Don't depend on OMAP_OCP2SCP 100 100 ed31ee7cf1fe phy: ti: usb2: Fix logic on -EPROBE_DEFER 100 85 7d470ebf586b serial: 8250_omap: Use clk_get_rate() to obtain fclk frequency 100 100 7f0c77f35b1b dt-bindings: serial: omap_serial: add clocks entry 61 100 d6ce4ec0b816 serial: 8250_omap: Drop check for of_node 100 100 032ecb59aa38 staging: android: ion: Remove unused headers 100 100 96d12a0d9409 staging: android: ion: Sync comment docs with struct ion_buffer 100 100 4d5119f448a8 staging: android: ion: Fixup some white-space issues 80 100 c72f4e31c8a3 staging: android: ion: Remove struct ion_platform_heap 100 100 6e42d12ce0da staging: android: ion: Remove leftover comment 97 97 4514e79e5a6b staging: android: ion: Merge ion-ioctl.c into ion.c 75 100 2fbe1707bae2 staging: android: ion: Remove empty ion_ioctl_dir() function 100 100 32462a98a005 staging: android: ion: Add proper header information 100 96 540f1ba7b3a5 ASoC: ti: davinci-mcasp: Add support for GPIO mode of the pins 100 100 4664b94c98b4 ASoC: davinci-mcasp: Document GPIO support 100 100 aa6eaaa2ffad arm64: dts: ti: k3-am65-mcu: Add ADC nodes 100 100 5bb57a7488c6 dt-bindings: input: ti-tsc-adc: Add new compatible for AM654 SoCs 25 100 7147f341e982 arm64: dts: ti: am654: Add Main System Control Module node 100 100 42d712a74d09 arm64: dts: ti: k3-am65: Add MSMC RAM node 100 100 7dd2e8f8a5dc ARM: dts: da850-lcdk: Enable the analog mic input 100 100 2cc788387497 mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller 100 100 70b64604fef0 dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC 100 33 2bda2f811b36 mtd: spi-nor: add octal read flag for flash mt35xu512aba 87 87 fcd44b64b1eb mtd: spi-nor: add opcodes for octal Read/Write commands 100 100 6297388e1edd drm/omap: dsi: Hack-fix DSI bus flags 100 100 4b3ab9372ffa iio: adc: ti_am335x_tscadc: Improve accuracy of measurement 100 100 f8c15790e4d8 drm/bridge: tc358767: use DP connector if no panel set 67 100 6d6b05e3d533 PCI: dwc: Don't hard-code DBI/ATU offset 100 100 a6906a8b0ebf iommu/omap: Remove DEBUG_SEQ_FOPS_RO() 100 100 5da94b50475a arm64: dts: ti: k3-am654: Enable main domain McSPI0 80 100 2cd7d393f461 arm64: dts: ti: k3-am654: Add McSPI DT nodes 100 100 e577d79424c0 arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM 77 100 07c663b0ee57 arm64: dts: ti: k3-am65-main: Add ECAP PWM node 91 100 19a1768fc34a arm64: dts: ti: k3-am654-base-board: Add I2C nodes 100 100 3f94859fd7ba arm64: dts: ti: am654-base-board: Add pinmux for main uart0 100 100 1d79b4375fbc arm64: dts: ti: k3-am65: Add pinctrl regions 100 100 fc66393ab5d6 dt-bindings: pinctrl: k3: Introduce pinmux definitions 100 81 0ec47be539e3 ARM: dts: am437x-gp-evm: Add sleep state for beeper pins 100 92 6a156a05bb55 ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake 60 86 74fe9bf45e71 ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states 100 85 7235ed186e12 ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins 92 96 88f527d0cf0b ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins 75 100 865852a6e52f ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin 100 100 03b10fecb921 soc: ti: wkup_m3: Add PRCM int16 as the wake up source 100 100 f9bb84090777 staging: android: ion: Remove unused header files 100 96 4073536c9274 staging: android: ion: Add per-heap counters 100 100 1517265228b4 usb: dwc3: trace: log ep commands in hex 100 100 408d3ba006af usb: dwc3: don't log probe deferrals; but do log other error codes 100 100 0d36dede4578 usb: dwc3: debugfs: Properly print/set link state for HS 100 100 2ed869990e14 phy: Add MIPI D-PHY configuration options 100 100 aeaac93ddb28 phy: Add configuration interface 100 100 c8457828ff48 phy: Add MIPI D-PHY mode 34 99 44d30d622821 phy: cadence: Add driver for Sierra PHY 100 100 cb96a690724e dt-bindings: phy: Document cadence Sierra PHY bindings 100 50 b3af06451bf8 phy: core: clean up unused ethernet specific phy modes 100 100 cccc43b853df phy: mvebu-cp110-comphy: convert to use eth phy mode and submode 100 100 2af8caeee478 phy: core: add PHY_MODE_ETHERNET 96 96 79a5a18aa9d1 phy: core: rework phy_set_mode to accept phy mode and submode 100 100 f0001f587731 dt-bindings: phy: Document cadence Sierra PHY bindings 97 100 961de0a856e3 mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929) 100 100 58fe8bbacd28 dt-bindings: sdhci-omap: Add note for cpu_thermal 60 78 41fd4caeb00b mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver 94 100 f98b4f98bbc8 dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's AM654 SOCs 100 100 52b5f5cfa2f7 mmc: sdhci-omap: Remove redundant structure assignments 100 100 5b0d62108b46 mmc: sdhci-omap: Add platform specific reset callback 77 100 d90996dae8e4 scsi: ufs: Add UFS platform driver for Cadence UFS 87 100 85408f830e70 scsi: dt-bindings: ufs: Add bindings for Cadence UFS 100 100 9e1e8a757080 scsi: ufs: set the device reference clock setting 100 92 5e28b8d8a1b0 bsg: provide bsg_remove_queue() helper 100 90 aae3b069d5ce bsg: pass in desired timeout handler 100 100 1ebb2446c303 net: ethernet: ti: cpsw: allow vlan tagged packets to be timestamped 91 100 a9423120343c net: ethernet: ti: cpts: move enable/disable flags outside of cpts module 100 100 f19dcd5f118d net: ethernet: ti: cpts: purge staled skbs from txq 100 100 d0e14c4d9bce net: ethernet: ti: cpts: correct debug for expired txq skb 100 77 b12a084c8729 spi: spi-mem: add support for octal mode I/O data transfer 100 87 6b03061f882d spi: add support for octal mode I/O data transfer 100 100 81df42d10457 spi: Kconfig: Enable McSPI driver for K3 platforms 100 100 abc61f47a70f spi: omap-spi: Add compatible for AM654 SoC 100 100 41e95652ee22 ARM: davinci_all_defconfig: Update the audio options 100 100 eab5b50a13de ARM: omap1_defconfig: Do not select ASoC by default 100 100 3162b05fb74c ARM: omap2plus_defconfig: Update the audio options 100 100 4d8c1e7efb9f ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options 100 100 558eb0bfb271 ARM: OMAP2: Update for new MCBSP Kconfig option 100 100 c27ace2e95a2 ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option 100 100 ca1c4d653524 MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support 97 85 f2055e145f29 ASoC: ti: Merge davinci and omap directories 100 100 22cc062c4dfb dt-bindings: sound: omap-mcpdm: Update documentation for pdmclk 100 100 a3641b30c19b ASoC: davinci-mcasp: Document dismod optional property 100 100 4647598cde0e ASoC: tlv320aic3x: Add support for CBM_CFS and CBS_CFM clocking modes 100 100 c9ece9c29e26 ASoC: omap-mcbsp: Skip dma_data.maxburst initialization 100 100 2c2596f3ab25 ASoC: omap: Remove unused machine driver for AM3517-evm 100 100 223bc10b8497 ASoC: pcm3168a: remove read-only status register from snd_kcontrol_new 100 100 e823fb165b76 media: ov5640: Add 60 fps support 100 92 f6cc192fbf08 media: ov5640: Make the FPS clamping / rounding more extendable 75 100 5a3ad937bc78 media: ov5640: Make the return rate type more explicit 100 93 086c25f8fef9 media: ov5640: Enhance FPS handling 100 33 dfbfb7aa832c media: ov5640: Compute the clock rate at runtime 100 100 a9e17125a568 media: ov5640: Remove redundant register setup 100 100 7851fe7ad4d9 media: ov5640: Remove redundant defines 56 100 c14d107e7417 media: ov5640: Remove the clocks registers initialization 87 100 aa2882481cad media: ov5640: Adjust the clock based on the expected rate 100 100 2d18fbc5518f media: ov5640: support log_status ioctl and event interface 66 100 a98086e00420 mtd: spi-nor: add entry for mt35xu512aba flash 100 100 0005aad09453 mtd: spi-nor: add macros related to MICRON flash 100 100 ea6b13e9fed0 drm/bridge/sii902x: Add missing dependency on I2C_MUX 95 100 21d808405fe4 drm/bridge/sii902x: Fix EDID readback 33 33 0a7f54ea0e1e drm/omap: fix bus_flags for panel-dpi 100 94 24ec84e854c6 drm/omap: Move DISPC runtime PM handling to omapdrm 100 100 350c03e88003 drm/omap: dsi: Ensure the device is active during probe 100 80 f8523b64d2d2 drm/omap: hdmi4: Ensure the device is active during bind 100 100 e0c827aca073 drm/omap: Populate DSS children in omapdss driver 100 100 ab214c48387a dt-bindings: i2c: omap: Add new compatible for AM654 SoCs 100 100 6f37709fb0a6 pwm: Enable TI ECAP driver for ARCH_K3 100 100 3c413e7e3922 dt-bindings: pwm: tiecap: Add TI AM654 SoC specific compatible 100 100 c289d6625237 Revert "pwm: Set class for exported channels in sysfs" 100 100 d6e7bbc148f9 clk: ti: Add functions to save/restore clk context 80 100 435365485f40 clk: clk: Add clk_gate_restore_context function 100 100 8b95d1ce3300 clk: Add functions to save/restore clock context en-masse 100 100 2f149e6e14bc clk: keystone: Enable TISCI clocks if K3_ARCH 100 100 ccf45b18ce89 rpmsg: char: Migrate to iter versions of read and write 100 100 3265230c5b05 remoteproc: add name in rproc_mem_entry struct 100 100 1bb89893d4fa remoteproc: Add missing kernel-doc comment for auto-boot 100 100 8abac18fecbd MAINTAINERS: Drop dt-bindings/genpd/k2g.h 100 100 1b9c30fe01df ARM: OMAP2+: hwmod_core: improve the support for clkctrl clocks 100 100 e69a35531589 firmware: ti_sci: Provide host-id as an optional dt parameter 100 100 79a79c3a0ec2 Documentation: dt: keystone: ti-sci: Add optional host-id parameter 100 100 d59c774496a2 arm64: defconfig: Enable SERIAL_8250_OMAP 100 100 41925a21cdb5 arm64: defconfig: Enable TI_SCI related configs 33 100 5c8a6b9db5e9 ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply 85 100 42e54f6467ec arm64: dts: ti: k3-am6: Add Device Management Security Controller support 100 100 77ccbae4f9c8 arm64: dts: ti: am654: Add secure proxy instance for main domain 92 100 4201af2544b3 arm64: dts: ti: am654: Add uart nodes 92 100 3bc1572068e3 arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2 100 100 0929983e49c8 media: ov5640: fix framerate update 100 100 b791187b0080 media: ov5640: use JPEG mode 3 for 720p 100 100 c886751465b8 serial: 8250_omap: Make 8250_omap driver driver depend on ARCH_K3 93 100 35ba13e43cfb staging: android: ion: Clean unused debug_show memeber of the heap object 100 100 cfc0f7a8ea80 drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3 100 100 2e65c7a6a15f drm/omap: fix use of freed memory 100 100 e64d0229340d drm/omap: Replace drm_gem_object_unreference_unlocked with put function 100 100 3ce11806c0ba drm/omap: Replace drm_gem_object_{un/reference} with put,get functions 100 100 e58febe1d99c drm/omap: Substitute format_is_yuv() with format->is_yuv 100 98 f5b9930b85dc drm/omap: partial workaround for DRA7xx DMM errata i878 95 95 176c866d4055 drm/omap: dmm_tiler: Fix interrupt request/free sequence during probe/remove 33 100 157aa884c906 drm/omap: dmm_tiler: No need to check if irq is valid in omap_dmm_remove 100 100 3a75010cecc9 drm/omap: remove set but not used variable 'frame_height' 100 100 993d52e2f715 drm/omap: Use ERR_CAST directly instead of ERR_PTR(PTR_ERR()) 100 100 c7d6a0d67646 drm/omap: remove unused header tcm-sita.h 90 22 6ea484309523 drm/omap: Don't call .set_timings() operation recursively 28 78 d8dbe7914376 drm/omap: Store CRTC timings in .set_timings() operation 67 62 96fc64c77537 drm/omap: sdi: Fixup video mode in .check_timings() operation 100 100 95e472da1094 drm/omap: hdmi: Constify video mode and related pointers 100 100 7d39e59be51b drm/omap: dsi: Fixup video mode in .set_config() operation 83 100 f79fa7da6a29 drm/omap: dpi: Don't fixup video mode in dpi_set_mode() 46 73 7c27fa57ef31 drm/omap: Call dispc timings check operation directly 90 100 31cd7afa3086 drm/omap: panels: Don't modify fixed timings 100 97 ca6e968b9326 drm/omap: Remove .get_timings() operation from display connectors 64 57 28120302c2fd drm/omap: Don't call .check_timings() operation recursively 28 88 b4935e3a3cfa drm/omap: Store bus flags in the omap_dss_device structure 100 100 26c91a3898f1 drm/omap: Don't store video mode internally for external encoders 75 75 138fe53ef8d3 drm/omap: Remove unneeded fallback for missing .check_timings() 100 100 9c626dee5cdb drm/omap: encoder-tfp410: Don't fix timings in .set_timings() handler 33 100 ec68cd5a18e1 drm/omap: dss: hdmi: Rename hdmi_display_(set|check)_timing() functions 70 60 52c5dd2a7bed drm/omap: Determine connector type directly in omap_connector.c 82 82 70f9cbfc56a3 drm/omap: Get from CRTC to display device directly 61 81 90279e9518da drm/omap: Don't call EDID read operation recursively 48 53 f006325cdc80 drm/omap: Move HPD disconnection handling to omap_connector 87 48 18412b667c96 drm/omap: Merge HPD enable operation with HPD callback registration 88 25 a21a8f3c93e1 drm/omap: Remove unneeded safety checks in the HPD operations 41 63 949ea2ef3fed drm/omap: Don't call HPD registration operations recursively 29 87 f2ea55775e05 drm/omap: Don't call .detect() operation recursively 53 100 09e5bb6d5b94 drm/omap: dss: Add device operations flags 50 47 83910ad3f51f drm/omap: Move most omap_dss_driver operations to omap_dss_device_ops 100 96 e7df6571024b drm/omap: panel-tpo-td043mtea1: Convert to the GPIO descriptors API 100 100 2167f9e28a30 drm/omap: panel-tpo-td028ttec1: Drop unneeded linux/gpio.h header 100 96 aec338cbf8c3 drm/omap: panel-sony-acx565akm: Convert to the GPIO descriptors API 100 100 57e0478a29cf drm/omap: panel-nec-nl8048hl11: Convert to the GPIO descriptors API 49 100 ac2d1fcbebd6 drm/omap: encoder-tfp410: Convert to the GPIO descriptors API 78 100 ede880e1825b drm/omap: connector-hdmi: Convert to the GPIO descriptors API 100 100 6f7ae8c29242 drm/omap: dss: Remove omap_dss_driver .[gs]et_mirror operations 100 100 e553ea09e268 drm/omap: dss: Remove unused omap_dss_driver operations 87 34 43f7078f6b6f drm/omap: dss: Remove the dss_mgr_(dis)connect() operations 100 100 d25a7d67465f drm/omap: Remove supported output check in CRTC connect handler 83 100 67dfd2d3d0c2 drm/omap: Remove omap_crtc_output global array 73 53 3be0f15bd6e9 drm/omap: dss: Merge two disconnection helpers 73 100 79ddb2f0c348 drm/omap: dss: Move connection checks to omapdss_device_(dis)connect 61 42 511afb44d72a drm/omap: Reverse direction of DSS device (dis)connect operations 36 50 2ee767922e1b drm/omap: Group CRTC, encoder, connector and dssdev in a structure 51 82 ac3b13189333 drm/omap: Create all planes before CRTCs 33 100 f96993630445 drm/omap: Remove unneeded variable assignments in omap_modeset_init 96 99 8a36357ae3b2 drm/omap: dss: Get regulators at probe time 23 93 a48bc6ac2c6c drm/omap: dss: Remove duplicated parameter to dss_mgr_(dis)connect() 94 92 c87193267d24 drm/omap: dss: venc: Move initialization code from bind to probe 97 95 5f031b471734 drm/omap: dss: hdmi5: Move initialization code from bind to probe 96 95 5fc15d98a068 drm/omap: dss: hdmi4: Move initialization code from bind to probe 93 88 edb715dffdee drm/omap: dss: dsi: Move initialization code from bind to probe 74 100 66aacfe22d53 drm/omap: dss: Cleanup error paths in output init functions 65 95 4e20bda68e01 drm/omap: dss: Replace omap_dss_device port number with bitmask 51 86 5c718e015a0f drm/omap: dss: Modify omapdss_find_output_from_display() to return channel 87 100 845417b3b3b0 drm/omap: dss: Move DSS mgr ops and private data to dss_device 32 46 c1dfe721e096 drm/omap: dss: Move and rename omap_dss_(get|put)_device() 87 89 67822ae11971 drm/omap: dss: Remove panel devices list 55 100 4e0bb06c0b9a drm/omap: dss: Split omapdss_register_display() 71 98 b9f4d2ebf641 drm/omap: dss: Make omap_dss_get_next_device() more generic 74 85 de57e9dbc145 drm/omap: dss: Remove output devices list 79 100 3ce75d67e44c drm/omap: Move DSI debugfs clocks dump to dsi%u_clks files 71 100 f3ed97f9ae7d drm/omap: dsi: Simplify debugfs implementation 24 57 7269fde4e8c9 drm/omap: displays: Remove input omap_dss_device from panel data 69 95 fb5571717c24 drm/omap: dss: Move src and dst check and set to connection handlers 90 100 1f507968c30b drm/omap: dss: Move debug message and checks to connection handlers 31 100 b93109d7dc9e drm/omap: dss: Move common device operations to common structure 56 56 e10bd354ad79 drm/omap: dss: Allow looking up any device by port 29 100 a7e82a67c1d7 drm/omap: dss: Rework output lookup by port node 96 96 9184f8d94c38 drm/omap: dss: Create and use omapdss_device_is_registered() 74 100 6a7c5a2200ad drm/omap: dss: Create global list of all omap_dss_device instances 66 100 df91128b205d drm/omap: dss: Remove omap_dss_device panel fields 100 100 d65b0e0530bb drm/omap: displays: Remove videomode from omap_dss_device structure 100 100 21ebcbac5066 drm/omap: dss: Remove unused omapdss_default_get_timings() 100 100 9976782f331b drm/omap: dss: Remove DSS encoders get_timings operation 100 100 52dd898a30e0 drm/omap: dss: Remove omapdss_atv_ops get_wss and set_wss operations 100 100 8023651bd3d9 drm/omap: dss: Handle DPI and SDI port initialization failures 90 100 cc1876ce5791 drm/omap: dss: Move platform_device_register from core.c to dss.c probe 100 100 f13e97cf3e72 drm/omap: dss: Gather OMAP DSS components at probe time 88 88 36c61ae2b755 drm/omap: dss: Remove display ordering from dss/display.c 79 100 fb96b67c8ae0 drm/omap: Allocate drm_device earlier and unref it as last step 100 100 0aeb35ea0e1a drm/dp: add extended receiver capability field present bit 100 100 09058eab4b4f rtc: omap: Cut down the shutdown time from 2 seconds to 1 sec 100 100 0438002ac526 rtc: omap: use of_device_is_system_power_controller function 40 100 c8b427edc737 phy: Add driver for Cadence MHDP DisplayPort SD0801 PHY 100 100 7effc8ba3e83 dt-bindings: phy: Document Cadence MHDP DisplayPort PHY bindings 47 100 471a7ba89158 ASoC: pcm3168a: add I2S/Left_J TDM support 60 100 594680ea4a39 ASoC: pcm3168a: add hw constraint for channel 100 100 380968898020 ASoC: pcm3168a: add HW constraint for non RIGHT_J 50 100 642a722d3116 ASoC: omap: use devm_snd_soc_register_component() 100 90 18d545bb2599 ASoC: tlv320aic31xx: Add overflow detection support 94 100 80863ee222d3 ASoC: tlv320aic31xx: Add short circuit detection support 89 100 e77044c5a842 scsi: ufs-bsg: Add support for uic commands in ufs_bsg_request() 57 92 95e34bf930ea scsi: ufs-bsg: Add support for raw upiu in ufs_bsg_request() 93 100 5e0a86eed846 scsi: ufs: Add API to execute raw upiu commands 100 100 220d17a69de4 scsi: ufs: Use data structure size in pointer arithmetic 89 100 df032bf27a41 scsi: ufs: Add a bsg endpoint that supports UPIUs 100 100 a851b2bd3632 scsi: uapi: ufs: Make utp_upiu_req visible to user space 100 80 c6049cd98212 scsi: ufs: add a low-level __ufshcd_issue_tm_cmd helper 77 100 391e388f853d scsi: ufs: cleanup struct utp_task_req_desc 100 100 c0b8558648c2 PCI: keystone: Reorder header file in alphabetical order 93 43 daaaa665ca01 PCI: keystone: Add debug error message for all errors 38 69 b4f1af8352fd PCI: keystone: Get number of outbound windows from DT 85 35 8047eb55129a PCI: keystone: Invoke runtime PM APIs to enable clock 85 98 49229238ab47 PCI: keystone: Cleanup PHY handling 86 100 b51a625b784a PCI: keystone: Use SYSCON APIs to get device ID from control module 100 100 03d178386477 dt-bindings: PCI: keystone: Add bindings to get device control module 43 26 a1cabd2b42fd PCI: keystone: Use uniform function naming convention 100 100 c81ab8013672 PCI: keystone: Remove redundant platform_set_drvdata() invocation 43 99 b492aca35c98 PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c 25 100 1f79f98f0575 PCI: keystone: Remove unused argument from ks_dw_pcie_host_init() 100 100 1e10f73e4cb0 PCI: keystone: Move dw_pcie_setup_rc() out of ks_pcie_establish_link() 100 100 00a2c4094f8e PCI: keystone: Use quirk to set MRRS for PCI host bridge 33 100 148e340c0696 PCI: keystone: Use quirk to limit MRRS for K2G 100 100 7a39915b723a Input: ti_am335x_tsc: Mark IRQ as wakeup capable 100 100 9eea8326f4e6 iio: adc: ti_am335x_adc: Disable ADC during suspend unconditionally 100 100 c974ac771479 mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable 100 100 333e07ec4b33 Input: ti_am335x_tsc: Mark TSC device as wakeup source 100 100 cec945c293fb mfd: ti_am335x_tscadc: Don't mark TSCADC MFD as wakeup capable 100 100 9737cc99dd14 net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode 100 100 762b9e9abb58 net: ethernet: ti: davinci_emac: simplify getting .driver_data 100 100 4e13c252276d net: ethernet: ti: cpsw: simplify getting .driver_data 100 100 5b3a5a14f84c net: ethernet: ti: cpsw: use for mcast entries only host port 100 100 5da1948969bc net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update 100 100 58bdeac8b0e7 net: ethernet: ti: cpsw_ale: use const for API having pointer on mac address 100 100 a90546e83a11 net: ti: Use FIELD_SIZEOF directly instead of reimplementing its function 100 97 89e8b9cb8465 spi: omap2-mcspi: Add slave mode support 84 100 b682cffa3ac6 spi: omap2-mcspi: Set FIFO DMA trigger level to word length 76 100 13d515c796ad spi: omap2-mcspi: Switch to readl_poll_timeout()