Hi,
Martin Blumenstingl martin.blumenstingl@googlemail.com writes:
On Mon, Jul 1, 2019 at 7:54 PM Martin Blumenstingl martin.blumenstingl@googlemail.com wrote:
On Mon, Jun 24, 2019 at 7:41 AM Minas Harutyunyan Minas.Harutyunyan@synopsys.com wrote:
On 6/20/2019 9:51 PM, Martin Blumenstingl wrote:
Use a 10000us AHB idle timeout in dwc2_core_reset() and make it consistent with the other "wait for AHB master IDLE state" ocurrences.
This fixes a problem for me where dwc2 would not want to initialize when updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with 4.14. Testing on my board shows that it takes 180us until AHB master IDLE state is signalled. The very old vendor driver for this SoC (ifxhcd) used a 1 second timeout. Use the same timeout that is used everywhere when polling for GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" (180us in my case) to have consistent behavior across the dwc2 driver.
Cc: linux-stable stable@vger.kernel.org # 4.19+ Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com
Acked-by: Minas Harutyunyan hminas@synopsys.com
thank you for reviewing this!
is there any chance we can get this fix into Linux 5.3? I know that it's too late for 5.2 so I'm fine with skipping that.
thank you Felipe for queuing this for v5.3! for reference, this patch is now in the usb-for-v5.3-part2 tag: [0]
[0] https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git/commit/?h=usb-...
I'll send pull request soon :-)