4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit c2a736b698008d296c5010ec39077eeb5796109f ]
The moxart interrupt line flags were not respected in previous driver: instead of assigning them per-consumer, a fixes mask was set in the controller.
With the migration to a standard Faraday driver we need to set up and handle the consumer flags correctly. Also remove the Moxart-specific flags when switching to using real consumer flags.
Extend the register window to 0x100 bytes as we may have a few more registers in there and it doesn't hurt.
Tested-by: Jonas Jensen jonas.jensen@gmail.com Signed-off-by: Jonas Jensen jonas.jensen@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Olof Johansson olof@lixom.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/moxart-uc7112lx.dts | 2 +- arch/arm/boot/dts/moxart.dtsi | 17 +++++++++-------- 2 files changed, 10 insertions(+), 9 deletions(-)
--- a/arch/arm/boot/dts/moxart-uc7112lx.dts +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -6,7 +6,7 @@ */
/dts-v1/; -/include/ "moxart.dtsi" +#include "moxart.dtsi"
/ { model = "MOXA UC-7112-LX"; --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -6,6 +6,7 @@ */
/include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h>
/ { compatible = "moxa,moxart"; @@ -36,8 +37,8 @@ ranges;
intc: interrupt-controller@98800000 { - compatible = "moxa,moxart-ic"; - reg = <0x98800000 0x38>; + compatible = "moxa,moxart-ic", "faraday,ftintc010"; + reg = <0x98800000 0x100>; interrupt-controller; #interrupt-cells = <2>; interrupt-mask = <0x00080000>; @@ -59,7 +60,7 @@ timer: timer@98400000 { compatible = "moxa,moxart-timer"; reg = <0x98400000 0x42>; - interrupts = <19 1>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; clocks = <&clk_apb>; };
@@ -80,7 +81,7 @@ dma: dma@90500000 { compatible = "moxa,moxart-dma"; reg = <0x90500080 0x40>; - interrupts = <24 0>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; };
@@ -93,7 +94,7 @@ sdhci: sdhci@98e00000 { compatible = "moxa,moxart-sdhci"; reg = <0x98e00000 0x5C>; - interrupts = <5 0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_apb>; dmas = <&dma 5>, <&dma 5>; @@ -120,7 +121,7 @@ mac0: mac@90900000 { compatible = "moxa,moxart-mac"; reg = <0x90900000 0x90>; - interrupts = <25 0>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <ðphy0>; phy-mode = "mii"; status = "disabled"; @@ -129,7 +130,7 @@ mac1: mac@92000000 { compatible = "moxa,moxart-mac"; reg = <0x92000000 0x90>; - interrupts = <27 0>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; phy-handle = <ðphy1>; phy-mode = "mii"; status = "disabled"; @@ -138,7 +139,7 @@ uart0: uart@98200000 { compatible = "ns16550a"; reg = <0x98200000 0x20>; - interrupts = <31 8>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; clock-frequency = <14745600>;