6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Tomek mtdev79b@gmail.com
[ Upstream commit f8020dfb311d2b6cf657668792aaa5fa8863a7dd ]
So far all RK3588 boards use fully aggregated PCIe. CM3588 is one of the few boards using this feature and apparently it is broken.
The PHY offers the following mapping options:
port 0 lane 0 - always mapped to controller 0 (4L) port 0 lane 1 - to controller 0 or 2 (1L0) port 1 lane 0 - to controller 0 or 1 (2L) port 1 lane 1 - to controller 0, 1 or 3 (1L1)
The data-lanes DT property maps these as follows:
0 = no controller (unsupported by the HW) 1 = 4L 2 = 2L 3 = 1L0 4 = 1L1
That allows the following configurations with first column being the mainline data-lane mapping, second column being the downstream name, third column being PCIE3PHY_GRF_CMN_CON0 and PHP_GRF_PCIESEL register values and final column being the user visible lane setup:
<1 1 1 1> = AGGREG = [4 0] = x4 (aggregation) <1 1 2 2> = NANBNB = [0 0] = x2 x2 (no bif.) <1 3 2 2> = NANBBI = [1 1] = x2 x1x1 (bif. of port 0) <1 1 2 4> = NABINB = [2 2] = x1x1 x2 (bif. of port 1) <1 3 2 4> = NABIBI = [3 3] = x1x1 x1x1 (bif. of both ports)
The driver currently does not program PHP_GRF_PCIESEL correctly, which is fixed by this patch. As a side-effect the new logic is much simpler than the old logic.
Fixes: 2e9bffc4f713 ("phy: rockchip: Support PCIe v3") Signed-off-by: Michal Tomek mtdev79b@gmail.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com Acked-by: Heiko Stuebner heiko@sntech.de Link: https://lore.kernel.org/r/20240404-rk3588-pcie-bifurcation-fixes-v1-1-990713... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../phy/rockchip/phy-rockchip-snps-pcie3.c | 24 +++++++------------ 1 file changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c index 1d355b32ba559..4f32a2dc24580 100644 --- a/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c +++ b/drivers/phy/rockchip/phy-rockchip-snps-pcie3.c @@ -131,7 +131,7 @@ static const struct rockchip_p3phy_ops rk3568_ops = { static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv) { u32 reg = 0; - u8 mode = 0; + u8 mode = RK3588_LANE_AGGREGATION; /* default */ int ret;
/* Deassert PCIe PMA output clamp mode */ @@ -139,28 +139,20 @@ static int rockchip_p3phy_rk3588_init(struct rockchip_p3phy_priv *priv)
/* Set bifurcation if needed */ for (int i = 0; i < priv->num_lanes; i++) { - if (!priv->lanes[i]) - mode |= (BIT(i) << 3); - if (priv->lanes[i] > 1) - mode |= (BIT(i) >> 1); - } - - if (!mode) - reg = RK3588_LANE_AGGREGATION; - else { - if (mode & (BIT(0) | BIT(1))) - reg |= RK3588_BIFURCATION_LANE_0_1; - - if (mode & (BIT(2) | BIT(3))) - reg |= RK3588_BIFURCATION_LANE_2_3; + mode &= ~RK3588_LANE_AGGREGATION; + if (priv->lanes[i] == 3) + mode |= RK3588_BIFURCATION_LANE_0_1; + if (priv->lanes[i] == 4) + mode |= RK3588_BIFURCATION_LANE_2_3; }
+ reg = mode; regmap_write(priv->phy_grf, RK3588_PCIE3PHY_GRF_CMN_CON0, (0x7<<16) | reg);
/* Set pcie1ln_sel in PHP_GRF_PCIESEL_CON */ if (!IS_ERR(priv->pipe_grf)) { - reg = (mode & (BIT(6) | BIT(7))) >> 6; + reg = mode & 3; if (reg) regmap_write(priv->pipe_grf, PHP_GRF_PCIESEL_CON, (reg << 16) | reg);