From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com
commit 1bfcbe5805d0cfc83c3544dcd01e0a282c1f6790 upstream.
If the platform doesn't use DMA device filter (as is the case with Elkhart Lake), whole lpss8250_dma_setup() setup is skipped. This results in skipping also *_maxburst setup which is undesirable. Refactor lpss8250_dma_setup() to configure DMA even if filter is not setup.
Cc: stable stable@kernel.org Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20221108121952.5497-3-ilpo.jarvinen@linux.intel.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_lpss.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -245,8 +245,13 @@ static int lpss8250_dma_setup(struct lps struct dw_dma_slave *rx_param, *tx_param; struct device *dev = port->port.dev;
- if (!lpss->dma_param.dma_dev) + if (!lpss->dma_param.dma_dev) { + dma = port->dma; + if (dma) + goto out_configuration_only; + return 0; + }
rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL); if (!rx_param) @@ -257,16 +262,18 @@ static int lpss8250_dma_setup(struct lps return -ENOMEM;
*rx_param = lpss->dma_param; - dma->rxconf.src_maxburst = lpss->dma_maxburst; - *tx_param = lpss->dma_param; - dma->txconf.dst_maxburst = lpss->dma_maxburst;
dma->fn = lpss8250_dma_filter; dma->rx_param = rx_param; dma->tx_param = tx_param;
port->dma = dma; + +out_configuration_only: + dma->rxconf.src_maxburst = lpss->dma_maxburst; + dma->txconf.dst_maxburst = lpss->dma_maxburst; + return 0; }