On Thu, Jun 21, 2018 at 07:10:00PM +0100, Nick Dyer wrote:
The pinctrl settings were incorrect for the touchscreen interrupt line, causing an interrupt storm. This change has been tested with both the atmel_mxt_ts and RMI4 drivers on the RDU1 units.
The value 0x4 comes from the value of register IOMUXC_SW_PAD_CTL_PAD_CSI1_D8 from the old vendor kernel.
Signed-off-by: Nick Dyer nick@shmanahar.org Fixes: ceef0396f367 ("ARM: dts: imx: add ZII RDU1 board") Cc: stable@vger.kernel.org # 4.15+ Reviewed-by: Fabio Estevam fabio.estevam@nxp.com Tested-by: Chris Healy cphealy@gmail.com
Applied, thanks.
Changes in v5:
- Add tested by Chris Healy
Changes in v4:
- Add reviewed by Fabio
You do not have to send new version just for collecting review and test tags. I will do that when applying.
Shawn
Changes in v3:
- Update commit message to add source of 0x4 value, fixes tag and CC stable
Changes in v2:
- Use hex, only alter IRQ line config
arch/arm/boot/dts/imx51-zii-rdu1.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index df9eca94d812..8a878687197b 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -770,7 +770,7 @@ pinctrl_ts: tsgrp { fsl,pins = <
MX51_PAD_CSI1_D8__GPIO3_12 0x85
MX51_PAD_CSI1_D8__GPIO3_12 0x04 MX51_PAD_CSI1_D9__GPIO3_13 0x85;};-- 2.17.1