From: Jack Pham jackp@codeaurora.org
commit c724417baf162bd3e035659e22cdf990cfb0d917 upstream.
SuperSpeedPlus peripherals must report their bMaxPower of the configuration descriptor in units of 8mA as per the USB 3.2 specification. The current switch statement in encode_bMaxPower() only checks for USB_SPEED_SUPER but not USB_SPEED_SUPER_PLUS so the latter falls back to USB 2.0 encoding which uses 2mA units. Replace the switch with a simple if/else.
Fixes: eae5820b852f ("usb: gadget: composite: Write SuperSpeedPlus config descriptors") Signed-off-by: Jack Pham jackp@codeaurora.org Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/gadget/composite.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
--- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -440,12 +440,10 @@ static u8 encode_bMaxPower(enum usb_devi val = CONFIG_USB_GADGET_VBUS_DRAW; if (!val) return 0; - switch (speed) { - case USB_SPEED_SUPER: - return DIV_ROUND_UP(val, 8); - default: + if (speed < USB_SPEED_SUPER) return DIV_ROUND_UP(val, 2); - } + else + return DIV_ROUND_UP(val, 8); }
static int config_buf(struct usb_configuration *config,