From: Michal Vokáč michal.vokac@ysoft.com
[ Upstream commit 7ae6d93c8f052b7a77ba56ed0f654e22a2876739 ]
The QCA8K family supports up to 7 ports. So use the existing QCA8K_NUM_PORTS define to allocate the switch structure and limit all operations with the switch ports.
This was not an issue until commit 0394a63acfe2 ("net: dsa: enable and disable all ports") disabled all unused ports. Since the unused ports 7-11 are outside of the correct register range on this switch some registers were rewritten with invalid content.
Fixes: 6b93fb46480a ("net-next: dsa: add new driver for qca8xxx family") Fixes: a0c02161ecfc ("net: dsa: variable number of ports") Fixes: 0394a63acfe2 ("net: dsa: enable and disable all ports") Signed-off-by: Michal Vokáč michal.vokac@ysoft.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/qca8k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index c3c9d7e33bd6c..8e49974ffa0ed 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -551,7 +551,7 @@ qca8k_setup(struct dsa_switch *ds) BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
/* Setup connection between CPU port & user ports */ - for (i = 0; i < DSA_MAX_PORTS; i++) { + for (i = 0; i < QCA8K_NUM_PORTS; i++) { /* CPU port gets connected to all user ports of the switch */ if (dsa_is_cpu_port(ds, i)) { qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), @@ -900,7 +900,7 @@ qca8k_sw_probe(struct mdio_device *mdiodev) if (id != QCA8K_ID_QCA8337) return -ENODEV;
- priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); + priv->ds = dsa_switch_alloc(&mdiodev->dev, QCA8K_NUM_PORTS); if (!priv->ds) return -ENOMEM;