From: Greg Kroah-Hartman gregkh@linuxfoundation.org
From: Kalle Valo kvalo@codeaurora.org
[ Upstream commit 77d7e87128d4dfb400df4208b2812160e999c165 ]
Commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") completely broke AP mode on QCA6390:
kernel: [ 151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22 wpa_supplicant[2307]: Failed to set beacon parameters wpa_supplicant[2307]: Interface initialization failed wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED wpa_supplicant[2307]: wlan0: AP-DISABLED wpa_supplicant[2307]: wlan0: Unable to setup interface. wpa_supplicant[2307]: Failed to initialize AP interface
This was because commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") added error handling for ath11k_peer_create(), which had been failing all along but was unnoticed due to the missing error handling. The actual bug was introduced already in commit aa44b2f3ecd4 ("ath11k: start vdev if a bss peer is already created").
ath11k_peer_create() was failing because for AP mode the peer is created already earlier op_add_interface() and we should skip creation here, but the check for modes was wrong. Fixing that makes AP mode work again.
This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Fixes: c134d1f8c436 ("ath11k: Handle errors if peer creation fails") Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/1614006849-25764-1-git-send-email-kvalo@codeaurora... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath11k/mac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index f3c5023f8a45..ee0edd918560 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -5262,8 +5262,8 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw, }
if (ab->hw_params.vdev_start_delay && - (arvif->vdev_type == WMI_VDEV_TYPE_AP || - arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)) { + arvif->vdev_type != WMI_VDEV_TYPE_AP && + arvif->vdev_type != WMI_VDEV_TYPE_MONITOR) { param.vdev_id = arvif->vdev_id; param.peer_type = WMI_PEER_TYPE_DEFAULT; param.peer_addr = ar->mac_addr;