On 20.04.2023 09:28, Krzysztof Kozlowski wrote:
After renaming NAND controller node name from "qpic-nand" to "nand-controller", the board DTS/DTSI also have to be updated:
Warning (unit_address_vs_reg): /soc/qpic-nand@79b0000: node has a unit name, but no reg or ranges property
Cc: stable@vger.kernel.org # 5.12
(g show 9e1e00f18afc:Makefile | head, rounded up to first release)
Reviewed-by: Konrad Dybcio konrad.dybcio@linaro.org
Konrad
Fixes: 9e1e00f18afc ("ARM: dts: qcom: Fix node name for NAND controller node") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 8 ++++---- arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi | 10 +++++----- arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi | 12 ++++++------ 3 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts index 79b0c6318e52..0993f840d1fc 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -11,9 +11,9 @@ soc { dma-controller@7984000 { status = "okay"; };
qpic-nand@79b0000 {status = "okay";};};
+&nand {
- status = "okay";
+}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi index a63b3778636d..468ebc40d2ad 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -102,10 +102,10 @@ pci@40000000 { status = "okay"; perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; };
qpic-nand@79b0000 {pinctrl-0 = <&nand_pins>;pinctrl-names = "default";};};
+&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
+}; diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi index 0107f552f520..7ef635997efa 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi @@ -65,11 +65,11 @@ i2c@78b7000 { /* BLSP1 QUP2 */ dma-controller@7984000 { status = "okay"; };
qpic-nand@79b0000 {pinctrl-0 = <&nand_pins>;pinctrl-names = "default";status = "okay";};};
+&nand {
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
- status = "okay";
+};