From: Vincent Stehlé vincent.stehle@laposte.net
[ Upstream commit 58bb90ab415562eededb932455046924e65df342 ]
The status "ACT" led on the Raspberry Pi Zero W is on when GPIO 47 is low.
This has been verified on a board and somewhat confirmed by both the GPIO name ("STATUS_LED_N") and the reduced schematics [1].
[1]: https://www.raspberrypi.org/documentation/hardware/raspberrypi/schematics/rp...
Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Vincent Stehlé vincent.stehle@laposte.net Cc: Stefan Wahren stefan.wahren@i2se.com Cc: Florian Fainelli f.fainelli@gmail.com Tested-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 4c3f606e5b8d..f65448c01e31 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -24,7 +24,7 @@
leds { act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; };