From: Ville Syrjälä ville.syrjala@linux.intel.com
Just like with PIPESTAT, the edge triggered IIR on i965/g4x also causes problems for hotplug interrupts. To make sure we don't get the IIR port interrupt bit stuck low with the ISR bit high we must force an edge in ISR. Unfortunately we can't borrow the PIPESTAT trick and toggle the enable bits in PORT_HOTPLUG_EN as that act itself generates hotplug interrupts. Instead we just have to loop until we've cleared PORT_HOTPLUG_STAT, or we just give up and WARN.
v2: Don't frob with PORT_HOTPLUG_EN
Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com --- drivers/gpu/drm/i915/i915_irq.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index d5aee0b74f4b..55a4d4f3fbb2 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1998,10 +1998,38 @@ static void valleyview_pipestat_irq_handler(struct drm_i915_private *dev_priv,
static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv) { - u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT); + u32 hotplug_status = 0, hotplug_status_mask; + int i; + + if (IS_G4X(dev_priv) || + IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + hotplug_status_mask = HOTPLUG_INT_STATUS_G4X | + DP_AUX_CHANNEL_MASK_INT_STATUS_G4X; + else + hotplug_status_mask = HOTPLUG_INT_STATUS_I915;
- if (hotplug_status) + /* + * We absolutely have to clear all the pending interrupt + * bits in PORT_HOTPLUG_STAT. Otherwise the ISR port + * interrupt bit won't have an edge, and the i965/g4x + * edge triggered IIR will not notice that an interrupt + * is still pending. We can't use PORT_HOTPLUG_EN to + * guarantee the edge as the act of toggling the enable + * bits can itself generate a new hotplug interrupt :( + */ + for (i = 0; i < 10; i++) { + u32 tmp = I915_READ(PORT_HOTPLUG_STAT) & hotplug_status_mask; + + if (tmp == 0) + return hotplug_status; + + hotplug_status |= tmp; I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status); + } + + WARN_ONCE(1, + "PORT_HOTPLUG_STAT did not clear (0x%08x)\n", + I915_READ(PORT_HOTPLUG_STAT));
return hotplug_status; }