From: Jacky.Cao@sony.com Jacky.Cao@sony.com
commit 2636d49b64671d3d90ecc4daf971b58df3956519 upstream.
The power budget for SuperSpeed mode should be 900 mA according to USB specification, so set the power budget to 900mA for dummy_start_ss which is only used for SuperSpeed mode.
If the max power consumption of SuperSpeed device is larger than 500 mA, insufficient available bus power error happens in usb_choose_configuration function when the device connects to dummy hcd.
Signed-off-by: Jacky Cao Jacky.Cao@sony.com Acked-by: Alan Stern stern@rowland.harvard.edu Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/16EA1F625E922C43B00B9D82250220500871CDE5@APYOKXMS1... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/gadget/udc/dummy_hcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -48,6 +48,7 @@ #define DRIVER_VERSION "02 May 2005"
#define POWER_BUDGET 500 /* in mA; use 8 for low-power port testing */ +#define POWER_BUDGET_3 900 /* in mA */
static const char driver_name[] = "dummy_hcd"; static const char driver_desc[] = "USB Host+Gadget Emulator"; @@ -2446,7 +2447,7 @@ static int dummy_start_ss(struct dummy_h dum_hcd->rh_state = DUMMY_RH_RUNNING; dum_hcd->stream_en_ep = 0; INIT_LIST_HEAD(&dum_hcd->urbp_list); - dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET; + dummy_hcd_to_hcd(dum_hcd)->power_budget = POWER_BUDGET_3; dummy_hcd_to_hcd(dum_hcd)->state = HC_STATE_RUNNING; dummy_hcd_to_hcd(dum_hcd)->uses_new_polling = 1; #ifdef CONFIG_USB_OTG