Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.15.107 release. There are 93 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri, 14 Apr 2023 08:28:02 +0000. Anything received after that time might be too late.
I think I'm seeing a regression here in the amdgpu driver, though not being a kernel dev I could be wrong.
I built and booted this today on an x86_64 machine (AMD Ryzen 7 3700X, Gigabyte X570 UD motherboard) with 3 x AMD graphics cards (using names from lspci output): - Cape Verde GL [FirePro W4100] - Oland XT [Radeon HD 8670 / R5 340X OEM / R7 250/350/350X OEM] (rev 83) - Bonaire [Radeon R7 200 Series]
All three using the amdgpu driver (radeon module blacklisted).
This machine has been running vanilla 5.15 stable releases for a good while, with the kernel updated with whatever the latest 5.15 release is every 6 weeks or so. Never had any amdgpu problems.
To build 5.15.107-rc1 I applied the contents of the queue-5.15 directory on top of 5.15.106, having synced the stable queue git repo up until commit 344d8ad1b5dde387d1ce4d1be2641753b89dd10d (still the latest commit as a type). This is what I have done for years running vanilla stable kernels.
There was nothing out of the ordinary in the build output, but on rebooting into 5.15.107-rc1 I had the following error in dmesg from 1 card only:
amdgpu 0000:0d:00.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vce0 (-110). [drm:process_one_work] *ERROR* ib ring test failed (-110).
This was during bootup immediately after driver loading. X is not running. 0000:0d:00.0 is the Bonaire card.
I then shutdown and fully powered off for a few minutes, booted 5.15.107-rc1 again, but the error on that card persisted exactly the same.
This was a regression for me as I've never had that error before on any kernel release (I grepped through old kernel logs to check).
I then rebuilt 5.15.107-rc1 but without applying the following 4 patches:
drm-panfrost-fix-the-panfrost_mmu_map_fault_addr-error-path.patch drm-amdgpu-fix-amdgpu_job_free_resources-v2.patch drm-amdgpu-prevent-race-between-late-signaled-fences.patch drm-bridge-lt9611-fix-pll-being-unable-to-lock.patch
On booting into the newly built kernel there was no error anymore, amdgpu dmesg output was as normal, and the machine is running fine now on that.
So I'm quite confident one of those patches introduced the error for me. Having now looked at the contents of them I see the lt9611 is entirely different hardware and I'm guessing the panfrost one probably is as well, so most likely I didn't need to remove those 2.
This is not a great report and maybe not helpful (sorry) as unfortunately I cannot try and narrow it down further to a single patch as this machine has to stay running now for a while. I just crudely tried yanking those 4 to hopefully get rid of the error and get the machine running again. Also I didn't go on to test whether the card actually worked as expected, maybe the error is harmless after all, though it doesn't look insignificant.
As the error was only output for the Bonaire card (the other two were fine), below is lspci -vvv output for that card only in case it helps. If anyone would like further info just let me know.
Eddie
0d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Bonaire [Radeon R7 200 Series] (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. [MSI] Bonaire [Radeon R7 200 Series] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 135 IOMMU group: 29 Region 0: Memory at 880000000 (64-bit, prefetchable) [size=1G] Region 2: Memory at 860000000 (64-bit, prefetchable) [size=8M] Region 4: I/O ports at f000 [size=256] Region 5: Memory at fce00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at fce40000 [disabled] [size=128K] Capabilities: [48] Vendor Specific Information: Len=08 <?> Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 8GT/s, Width x16 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+ EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee00000 Data: 0000 Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [200 v1] Physical Resizable BAR BAR 0: current size: 1GB, supported: 256MB 512MB 1GB Capabilities: [270 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [2b0 v1] Address Translation Service (ATS) ATSCap: Invalidate Queue Depth: 00 ATSCtl: Enable+, Smallest Translation Unit: 00 Capabilities: [2c0 v1] Page Request Interface (PRI) PRICtl: Enable- Reset- PRISta: RF- UPRGI- Stopped+ Page Request Capacity: 00000020, Page Request Allocation: 00000000 Capabilities: [2d0 v1] Process Address Space ID (PASID) PASIDCap: Exec+ Priv+, Max PASID Width: 10 PASIDCtl: Enable- Exec- Priv- Kernel driver in use: amdgpu Kernel modules: radeon, amdgpu