From: Nick Hainke vincent@systemli.org
[ Upstream commit c98e6e683632386a3bd284acda4342e68aec4c41 ]
The bananapi R64 (BPI-R64) experiences wrong WPS button signals. In OpenWrt pushing the WPS button while powering on the device will set it to recovery mode. Currently, this also happens without any user interaction. In particular, the wrong signals appear while booting the device or restarting it, e.g. after doing a system upgrade. If the device is in recovery mode the user needs to manually power cycle or restart it.
The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in the device tree. This setting seems to suppress the unwanted WPS button press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW.
The official BPI-R64 sources can be found on https://github.com/BPI-SINOVOIP/BPI-R64-openwrt
Fixes: 0b6286dd96c0 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Suggested-by: INAGAKI Hiroshi musashino.open@gmail.com Signed-off-by: Nick Hainke vincent@systemli.org Link: https://lore.kernel.org/r/20220630111746.4098-1-vincent@systemli.org Signed-off-by: Matthias Brugger matthias.bgg@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index 83e10591e0e5..81215cc3759a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -49,7 +49,7 @@ factory { wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; - gpios = <&pio 102 GPIO_ACTIVE_HIGH>; + gpios = <&pio 102 GPIO_ACTIVE_LOW>; }; };