From: Heiner Kallweit hkallweit1@gmail.com
[ Upstream commit effa453168a7eeb8a562ff4edc1dbf9067360a61 ]
If an invalid block size is provided, reject it instead of silently changing it to a supported value. Especially critical I see the case of a write transfer with block length 0. In this case we have no guarantee that the byte we would write is valid. When silently reducing a read to 32 bytes then we don't return an error and the caller may falsely assume that we returned the full requested data.
If this change should break any (broken) caller, then I think we should fix the caller.
Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Reviewed-by: Jean Delvare jdelvare@suse.de Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-i801.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index efafd028c5d16..fb0ddaad87d2e 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -774,6 +774,11 @@ static int i801_block_transaction(struct i801_priv *priv, int result = 0; unsigned char hostc;
+ if (read_write == I2C_SMBUS_READ && command == I2C_SMBUS_BLOCK_DATA) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + else if (data->block[0] < 1 || data->block[0] > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + if (command == I2C_SMBUS_I2C_BLOCK_DATA) { if (read_write == I2C_SMBUS_WRITE) { /* set I2C_EN bit in configuration register */ @@ -787,16 +792,6 @@ static int i801_block_transaction(struct i801_priv *priv, } }
- if (read_write == I2C_SMBUS_WRITE - || command == I2C_SMBUS_I2C_BLOCK_DATA) { - if (data->block[0] < 1) - data->block[0] = 1; - if (data->block[0] > I2C_SMBUS_BLOCK_MAX) - data->block[0] = I2C_SMBUS_BLOCK_MAX; - } else { - data->block[0] = 32; /* max for SMBus block reads */ - } - /* Experience has shown that the block buffer can only be used for SMBus (not I2C) block transactions, even though the datasheet doesn't mention this limitation. */