2 Dec
2019
2 Dec
'19
7:13 p.m.
On Fri, Nov 29, 2019 at 01:39:39PM +0200, Stefan Mavrodiev wrote:
A64-OLinuXino-eMMC uses 1.8V for eMMC supply. This is done via a triple jumper, which sets VCC-PL to either 1.8V or 3.3V. This setting is different for boards with and without eMMC.
This is not a big issue for DDR52 mode, however the eMMC will not work in HS200/HS400, since these modes explicitly requires 1.8V.
Fixes: 94f68f3a4b2a ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)") Cc: stable@vger.kernel.org # v5.4 Signed-off-by: Stefan Mavrodiev stefan@olimex.com
Applied, thanks! Maxime