From: Arnd Bergmann arnd@arndb.de
[ Upstream commit cef397038167ac15d085914493d6c86385773709 ]
Stefan Agner reported a bug when using zsram on 32-bit Arm machines with RAM above the 4GB address boundary:
Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = a27bd01c [00000000] *pgd=236a0003, *pmd=1ffa64003 Internal error: Oops: 207 [#1] SMP ARM Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1 Hardware name: BCM2711 PC is at zs_map_object+0x94/0x338 LR is at zram_bvec_rw.constprop.0+0x330/0xa64 pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013 sp : e376bbe0 ip : 00000000 fp : c1e2921c r10: 00000002 r9 : c1dda730 r8 : 00000000 r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000 r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5383d Table: 235c2a80 DAC: fffffffd Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6) Stack: (0xe376bbe0 to 0xe376c000)
As it turns out, zsram needs to know the maximum memory size, which is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.
The same problem will be hit on all 32-bit architectures that have a physical address space larger than 4GB and happen to not enable sparsemem and include asm/sparsemem.h from asm/pgtable.h.
After the initial discussion, I suggested just always defining MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is set, or provoking a build error otherwise. This addresses all configurations that can currently have this runtime bug, but leaves all other configurations unchanged.
I looked up the possible number of bits in source code and datasheets, here is what I found:
- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used - on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never support more than 32 bits, even though supersections in theory allow up to 40 bits as well. - on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5 XPA supports up to 60 bits in theory, but 40 bits are more than anyone will ever ship - On PowerPC, there are three different implementations of 36 bit addressing, but 32-bit is used without CONFIG_PTE_64BIT - On RISC-V, the normal page table format can support 34 bit addressing. There is no highmem support on RISC-V, so anything above 2GB is unused, but it might be useful to eventually support CONFIG_ZRAM for high pages.
Fixes: 61989a80fb3a ("staging: zsmalloc: zsmalloc memory allocation library") Fixes: 02390b87a945 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS") Acked-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Reviewed-by: Stefan Agner stefan@agner.ch Tested-by: Stefan Agner stefan@agner.ch Acked-by: Mike Rapoport rppt@linux.ibm.com Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.16... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org [florian: patch arch/powerpc/include/asm/pte-common.h for 4.9.y removed arch/riscv/include/asm/pgtable.h which does not exist] Signed-off-by: Florian Fainelli f.fainelli@gmail.com --- arch/arc/include/asm/pgtable.h | 2 ++ arch/arm/include/asm/pgtable-2level.h | 2 ++ arch/arm/include/asm/pgtable-3level.h | 2 ++ arch/mips/include/asm/pgtable-32.h | 3 +++ arch/powerpc/include/asm/pte-common.h | 2 ++ include/asm-generic/pgtable.h | 13 +++++++++++++ 6 files changed, 24 insertions(+)
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index c10f5cb203e6..81198a6773c6 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -137,8 +137,10 @@
#ifdef CONFIG_ARC_HAS_PAE40 #define PTE_BITS_NON_RWX_IN_PD1 (0xff00000000 | PAGE_MASK | _PAGE_CACHEABLE) +#define MAX_POSSIBLE_PHYSMEM_BITS 40 #else #define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK | _PAGE_CACHEABLE) +#define MAX_POSSIBLE_PHYSMEM_BITS 32 #endif
/************************************************************************** diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index 92fd2c8a9af0..6154902bed83 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -78,6 +78,8 @@ #define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) #define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32))
+#define MAX_POSSIBLE_PHYSMEM_BITS 32 + /* * PMD_SHIFT determines the size of the area a second-level page table can map * PGDIR_SHIFT determines what a third-level page table entry can map diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 2a029bceaf2f..35807e611b6e 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -37,6 +37,8 @@ #define PTE_HWTABLE_OFF (0) #define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u64))
+#define MAX_POSSIBLE_PHYSMEM_BITS 40 + /* * PGDIR_SHIFT determines the size a top-level page table entry can map. */ diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index c0be540e83cb..2c6df5a92e1e 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -110,6 +110,7 @@ static inline void pmd_clear(pmd_t *pmdp)
#if defined(CONFIG_XPA)
+#define MAX_POSSIBLE_PHYSMEM_BITS 40 #define pte_pfn(x) (((unsigned long)((x).pte_high >> _PFN_SHIFT)) | (unsigned long)((x).pte_low << _PAGE_PRESENT_SHIFT)) static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) @@ -125,6 +126,7 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
#elif defined(CONFIG_PHYS_ADDR_T_64BIT) && defined(CONFIG_CPU_MIPS32)
+#define MAX_POSSIBLE_PHYSMEM_BITS 36 #define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) @@ -139,6 +141,7 @@ static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
#else
+#define MAX_POSSIBLE_PHYSMEM_BITS 32 #ifdef CONFIG_CPU_VR41XX #define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) #define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h index 4ba26dd259fd..0d81cd9dd60e 100644 --- a/arch/powerpc/include/asm/pte-common.h +++ b/arch/powerpc/include/asm/pte-common.h @@ -101,8 +101,10 @@ static inline bool pte_user(pte_t pte) */ #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) #define PTE_RPN_MASK (~((1ULL<<PTE_RPN_SHIFT)-1)) +#define MAX_POSSIBLE_PHYSMEM_BITS 36 #else #define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1)) +#define MAX_POSSIBLE_PHYSMEM_BITS 32 #endif
/* _PAGE_CHG_MASK masks of bits that are to be preserved across diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h index 0a4c2d4d9f8d..b43fa9d95a7a 100644 --- a/include/asm-generic/pgtable.h +++ b/include/asm-generic/pgtable.h @@ -847,6 +847,19 @@ static inline bool arch_has_pfn_modify_check(void) #define io_remap_pfn_range remap_pfn_range #endif
+#if !defined(MAX_POSSIBLE_PHYSMEM_BITS) && !defined(CONFIG_64BIT) +#ifdef CONFIG_PHYS_ADDR_T_64BIT +/* + * ZSMALLOC needs to know the highest PFN on 32-bit architectures + * with physical address space extension, but falls back to + * BITS_PER_LONG otherwise. + */ +#error Missing MAX_POSSIBLE_PHYSMEM_BITS definition +#else +#define MAX_POSSIBLE_PHYSMEM_BITS 32 +#endif +#endif + #ifndef has_transparent_hugepage #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define has_transparent_hugepage() 1