From: Suganath Prabu S suganath-prabu.subramani@broadcom.com
Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as per hardware design, if DMA able range contains all 64-bits set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault.
e.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000 bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then HBA will fault the firmware.
Fix: Driver will set 63-bit DMA mask to ensure the above address will not be used.
Cc: stable@vger.kernel.org # 4.19.63 Signed-off-by: Suganath Prabu S suganath-prabu.subramani@broadcom.com --- Note: This Patch is for stable kernel 4.19.63. Original patch is applied to 5.3/scsi-fixes. commit ID: df9a606184bfdb5ae3ca9d226184e9489f5c24f7
drivers/scsi/mpt3sas/mpt3sas_base.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 8776330..d2ab520 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2565,12 +2565,14 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { struct sysinfo s; u64 consistent_dma_mask; + /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ + int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64;
if (ioc->is_mcpu_endpoint) goto try_32bit;
if (ioc->dma_mask) - consistent_dma_mask = DMA_BIT_MASK(64); + consistent_dma_mask = DMA_BIT_MASK(dma_mask); else consistent_dma_mask = DMA_BIT_MASK(32);
@@ -2578,11 +2580,11 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) const uint64_t required_mask = dma_get_required_mask(&pdev->dev); if ((required_mask > DMA_BIT_MASK(32)) && - !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) && + !pci_set_dma_mask(pdev, DMA_BIT_MASK(dma_mask)) && !pci_set_consistent_dma_mask(pdev, consistent_dma_mask)) { ioc->base_add_sg_single = &_base_add_sg_single_64; ioc->sge_size = sizeof(Mpi2SGESimple64_t); - ioc->dma_mask = 64; + ioc->dma_mask = dma_mask; goto out; } } @@ -2609,7 +2611,7 @@ static int _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { - if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { + if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) { if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) return -ENODEV; } @@ -4545,7 +4547,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) total_sz += sz; } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count));
- if (ioc->dma_mask == 64) { + if (ioc->dma_mask > 32) { if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) { pr_warn(MPT3SAS_FMT "no suitable consistent DMA mask for %s\n",