4.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chaitra P B chaitra.basappa@broadcom.com
[ Upstream commit f49d4aed1315a7b766d855f1367142e682b0cc87 ]
1. In IO path, setting of "ATA command pending" flag early before device removal, invalid device handle etc., checks causes any new commands to be always returned with SAM_STAT_BUSY and when the driver removes the drive the SML issues SYNC Cache command and that command is always returned with SAM_STAT_BUSY and thus making SYNC Cache command to requeued.
2. If the driver gets an ATA PT command for a SATA drive then the driver set "ATA command pending" flag in device specific data structure not to allow any further commands until the ATA PT command is completed. However, after setting the flag if the driver decides to return the command back to upper layers without actually issuing to the firmware (i.e., returns from qcmd failure return paths) then the corresponding flag is not cleared and this prevents the driver from sending any new commands to the drive.
This patch fixes above two issues by setting of "ATA command pending" flag after checking for whether device deleted, invalid device handle, device busy with task management. And by setting "ATA command pending" flag to false in all of the qcmd failure return paths after setting the flag.
Signed-off-by: Chaitra P B chaitra.basappa@broadcom.com Signed-off-by: Suganath Prabu S suganath-prabu.subramani@broadcom.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-)
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -3886,19 +3886,6 @@ scsih_qcmd(struct Scsi_Host *shost, stru return 0; }
- /* - * Bug work around for firmware SATL handling. The loop - * is based on atomic operations and ensures consistency - * since we're lockless at this point - */ - do { - if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { - scmd->result = SAM_STAT_BUSY; - scmd->scsi_done(scmd); - return 0; - } - } while (_scsih_set_satl_pending(scmd, true)); - sas_target_priv_data = sas_device_priv_data->sas_target;
/* invalid device handle */ @@ -3924,6 +3911,19 @@ scsih_qcmd(struct Scsi_Host *shost, stru sas_device_priv_data->block) return SCSI_MLQUEUE_DEVICE_BUSY;
+ /* + * Bug work around for firmware SATL handling. The loop + * is based on atomic operations and ensures consistency + * since we're lockless at this point + */ + do { + if (test_bit(0, &sas_device_priv_data->ata_command_pending)) { + scmd->result = SAM_STAT_BUSY; + scmd->scsi_done(scmd); + return 0; + } + } while (_scsih_set_satl_pending(scmd, true)); + if (scmd->sc_data_direction == DMA_FROM_DEVICE) mpi_control = MPI2_SCSIIO_CONTROL_READ; else if (scmd->sc_data_direction == DMA_TO_DEVICE) @@ -3945,6 +3945,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (!smid) { pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n", ioc->name, __func__); + _scsih_set_satl_pending(scmd, false); goto out; } mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); @@ -3975,6 +3976,7 @@ scsih_qcmd(struct Scsi_Host *shost, stru if (mpi_request->DataLength) { if (ioc->build_sg_scmd(ioc, scmd, smid)) { mpt3sas_base_free_smid(ioc, smid); + _scsih_set_satl_pending(scmd, false); goto out; } } else