On Wed, Sep 11, 2019 at 08:01:40AM -0600, Mathieu Poirier wrote:
On Tue, 10 Sep 2019 at 08:36, Greg KH greg@kroah.com wrote:
On Thu, Sep 05, 2019 at 10:17:45AM -0600, Mathieu Poirier wrote:
From: Roger Quadros rogerq@ti.com
commit 42bf02ec6e420e541af9a47437d0bdf961ca2972 upstream
Some platforms (e.g. TI's DRA7 USB2 instance) have more trouble with the metastability workaround as it supports only a High-Speed PHY and the PHY can enter into an Erratic state [1] when the controller is set in SuperSpeed mode as part of the metastability workaround.
This causes upto 2 seconds delay in enumeration on DRA7's USB2 instance in gadget mode.
If these platforms can be better off without the workaround, provide a device tree property to suggest that so the workaround is avoided.
[1] Device mode enumeration trace showing PHY Erratic Error. irq/90-dwc3-969 [000] d... 52.323145: dwc3_event: event (00000901): Erratic Error [U0] irq/90-dwc3-969 [000] d... 52.560646: dwc3_event: event (00000901): Erratic Error [U0] irq/90-dwc3-969 [000] d... 52.798144: dwc3_event: event (00000901): Erratic Error [U0]
Does the DT also need to get updated with this new id for this? Is that a separate patch somewhere?
The upstream commit is:
b8c9c6fa2002 ARM: dts: dra7: Disable USB metastability workaround for USB2
Should I just send the latter or you prefer a resend with both patches?
I've queued this up now, along with the rest of this series, thanks.
greg k-h