From: Lino Sanfilippo LinoSanfilippo@gmx.de
[ Upstream commit d1180405c7b5c7a1c6bde79d5fc24fe931430737 ]
With commit 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") the function devm_ioremap() called from pl011_setup_port() was replaced with devm_ioremap_resource(). Since this function not only remaps but also requests the ports io memory region it now collides with the .config_port() callback which requests the same region at uart port registration.
Since devm_ioremap_resource() already claims the memory successfully, the request in .config_port() fails.
Later at uart port deregistration the attempt to release the unclaimed memory also fails. The failure results in a “Trying to free nonexistent resource" warning.
Fix these issues by removing the callbacks that implement the redundant memory allocation/release. Also make sure that changing the drivers io memory base address via TIOCSSERIAL is not allowed any more.
Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") Signed-off-by: Lino Sanfilippo LinoSanfilippo@gmx.de Link: https://lore.kernel.org/r/20211129174238.8333-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/amba-pl011.c | 27 +++------------------------ 1 file changed, 3 insertions(+), 24 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 3d63e9a71c376..5edc3813a9b99 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2094,32 +2094,13 @@ static const char *pl011_type(struct uart_port *port) return uap->port.type == PORT_AMBA ? uap->type : NULL; }
-/* - * Release the memory region(s) being used by 'port' - */ -static void pl011_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, SZ_4K); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int pl011_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") - != NULL ? 0 : -EBUSY; -} - /* * Configure/autoconfigure the port. */ static void pl011_config_port(struct uart_port *port, int flags) { - if (flags & UART_CONFIG_TYPE) { + if (flags & UART_CONFIG_TYPE) port->type = PORT_AMBA; - pl011_request_port(port); - } }
/* @@ -2134,6 +2115,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; + if (port->mapbase != (unsigned long) ser->iomem_base) + ret = -EINVAL; return ret; }
@@ -2151,8 +2134,6 @@ static const struct uart_ops amba_pl011_pops = { .flush_buffer = pl011_dma_flush_buffer, .set_termios = pl011_set_termios, .type = pl011_type, - .release_port = pl011_release_port, - .request_port = pl011_request_port, .config_port = pl011_config_port, .verify_port = pl011_verify_port, #ifdef CONFIG_CONSOLE_POLL @@ -2182,8 +2163,6 @@ static const struct uart_ops sbsa_uart_pops = { .shutdown = sbsa_uart_shutdown, .set_termios = sbsa_uart_set_termios, .type = pl011_type, - .release_port = pl011_release_port, - .request_port = pl011_request_port, .config_port = pl011_config_port, .verify_port = pl011_verify_port, #ifdef CONFIG_CONSOLE_POLL