From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit d9cd78edb2e6b7e26747c0ec312be31e7ef196fe ]

How the type promotion works in ternary expressions is a bit tricky. The problem is that scpi_clk_get_val() returns longs, "ret" is a int which holds a negative error code, and le32_to_cpu() is an unsigned int. We want the negative error code to be cast to a negative long. But because le32_to_cpu() is an u32 then "ret" is type promoted to u32 and becomes a high positive and then it is promoted to long and it is still a high positive value.

Fix this by getting rid of the ternary.

Link: https://lore.kernel.org/r/YIE7pdqV/h10tEAK@mwanda Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol") Reviewed-by: Cristian Marussi cristian.marussi@arm.com Signed-off-by: Dan Carpenter dan.carpenter@oracle.com [sudeep.holla: changed to return 0 as clock rate on error] Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/arm_scpi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index a80c331c3a6e..e2995ec14401 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -552,8 +552,10 @@ static unsigned long scpi_clk_get_val(u16 clk_id)

ret = scpi_send_message(CMD_GET_CLOCK_VALUE, &le_clk_id, sizeof(le_clk_id), &rate, sizeof(rate)); + if (ret) + return 0;

- return ret ? ret : le32_to_cpu(rate); + return le32_to_cpu(rate); }

static int scpi_clk_set_val(u16 clk_id, unsigned long rate)

From: Leon Romanovsky leonro@nvidia.com

[ Upstream commit a568814a55a0e82bbc7c7b51333d0c38e8fb5520 ]

The check for the NULL of pointer received from container_of() is incorrect by definition as it points to some offset from NULL.

Change such check with proper NULL check of SIW QP attributes.

Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Link: https://lore.kernel.org/r/a7535a82925f6f4c1f062abaa294f3ae6e54bdd2.162056031... Signed-off-by: Leon Romanovsky leonro@nvidia.com Reviewed-by: Bernard Metzler bmt@zurich.ibm.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/sw/siw/siw_verbs.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c index 2c3704f0f10f..daa71469269e 100644 --- a/drivers/infiniband/sw/siw/siw_verbs.c +++ b/drivers/infiniband/sw/siw/siw_verbs.c @@ -314,7 +314,6 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd, struct siw_ucontext *uctx = rdma_udata_to_drv_context(udata, struct siw_ucontext, base_ucontext); - struct siw_cq *scq = NULL, *rcq = NULL; unsigned long flags; int num_sqe, num_rqe, rv = 0;

@@ -353,10 +352,8 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd, rv = -EINVAL; goto err_out; } - scq = to_siw_cq(attrs->send_cq); - rcq = to_siw_cq(attrs->recv_cq);

- if (!scq || (!rcq && !attrs->srq)) { + if (!attrs->send_cq || (!attrs->recv_cq && !attrs->srq)) { siw_dbg(base_dev, "send CQ or receive CQ invalid\n"); rv = -EINVAL; goto err_out; @@ -423,8 +420,8 @@ struct ib_qp *siw_create_qp(struct ib_pd *pd, } } qp->pd = pd; - qp->scq = scq; - qp->rcq = rcq; + qp->scq = to_siw_cq(attrs->send_cq); + qp->rcq = to_siw_cq(attrs->recv_cq);

if (attrs->srq) { /*

From: Leon Romanovsky leonro@nvidia.com

[ Upstream commit 67f29896fdc83298eed5a6576ff8f9873f709228 ]

rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly created ones, but in case rxe_qp_from_init() failed it was filled with garbage and caused tot the following error.

refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Modules linked in: CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55 RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800 R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000 FS: 00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805 execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327 rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391 kref_put include/linux/kref.h:65 [inline] rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425 _ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline] ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231 ib_create_qp include/rdma/ib_verbs.h:3644 [inline] create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920 ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline] ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092 add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717 enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331 ib_register_device drivers/infiniband/core/device.c:1413 [inline] ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365 rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147 rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247 rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503 rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline] rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250 nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555 rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/7bf8d548764d406dbbbaf4b574960ebfd5af8387.162071791... Reported-by: syzbot+36a7f280de4e11c6f04e@syzkaller.appspotmail.com Signed-off-by: Leon Romanovsky leonro@nvidia.com Reviewed-by: Zhu Yanjun zyjzyj2000@gmail.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/sw/rxe/rxe_qp.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c index f85273883794..d427a343c09f 100644 --- a/drivers/infiniband/sw/rxe/rxe_qp.c +++ b/drivers/infiniband/sw/rxe/rxe_qp.c @@ -260,6 +260,7 @@ static int rxe_qp_init_req(struct rxe_dev *rxe, struct rxe_qp *qp, if (err) { vfree(qp->sq.queue->buf); kfree(qp->sq.queue); + qp->sq.queue = NULL; return err; }

@@ -313,6 +314,7 @@ static int rxe_qp_init_resp(struct rxe_dev *rxe, struct rxe_qp *qp, if (err) { vfree(qp->rq.queue->buf); kfree(qp->rq.queue); + qp->rq.queue = NULL; return err; } } @@ -373,6 +375,11 @@ int rxe_qp_from_init(struct rxe_dev *rxe, struct rxe_qp *qp, struct rxe_pd *pd, err2: rxe_queue_cleanup(qp->sq.queue); err1: + qp->pd = NULL; + qp->rcq = NULL; + qp->scq = NULL; + qp->srq = NULL; + if (srq) rxe_drop_ref(srq); rxe_drop_ref(scq);

From: Zhen Lei thunder.leizhen@huawei.com

[ Upstream commit 5cb289bf2d7c34ca1abd794ce116c4f19185a1d4 ]

Fix to return a negative error code from the error handling case instead of 0 as done elsewhere in this function.

Link: https://lore.kernel.org/r/20210514090952.6715-1-thunder.leizhen@huawei.com Fixes: a9083016a531 ("[SCSI] qla2xxx: Add ISP82XX support.") Reported-by: Hulk Robot hulkci@huawei.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Zhen Lei thunder.leizhen@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_nx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index c855d013ba8a..de567a025133 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -1113,7 +1113,8 @@ qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr, return ret; }

- if (qla82xx_flash_set_write_enable(ha)) + ret = qla82xx_flash_set_write_enable(ha); + if (ret < 0) goto done_write;

qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, data);

From: Shay Drory shayd@nvidia.com

[ Upstream commit 889d916b6f8a48b8c9489fffcad3b78eedd01a51 ]

restrack should only be attached to a cm_id while the ID has a valid device pointer. It is set up when the device is first loaded, but not cleared when the device is removed. There is also two copies of the device pointer, one private and one in the public API, and these were left out of sync.

Make everything go to NULL together and manipulate restrack right around the device assignments.

Found by syzcaller: BUG: KASAN: wild-memory-access in __list_del include/linux/list.h:112 [inline] BUG: KASAN: wild-memory-access in __list_del_entry include/linux/list.h:135 [inline] BUG: KASAN: wild-memory-access in list_del include/linux/list.h:146 [inline] BUG: KASAN: wild-memory-access in cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline] BUG: KASAN: wild-memory-access in cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline] BUG: KASAN: wild-memory-access in cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783 Write of size 8 at addr dead000000000108 by task syz-executor716/334

CPU: 0 PID: 334 Comm: syz-executor716 Not tainted 5.11.0+ #271 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0xbe/0xf9 lib/dump_stack.c:120 __kasan_report mm/kasan/report.c:400 [inline] kasan_report.cold+0x5f/0xd5 mm/kasan/report.c:413 __list_del include/linux/list.h:112 [inline] __list_del_entry include/linux/list.h:135 [inline] list_del include/linux/list.h:146 [inline] cma_cancel_listens drivers/infiniband/core/cma.c:1767 [inline] cma_cancel_operation drivers/infiniband/core/cma.c:1795 [inline] cma_cancel_operation+0x1f4/0x4b0 drivers/infiniband/core/cma.c:1783 _destroy_id+0x29/0x460 drivers/infiniband/core/cma.c:1862 ucma_close_id+0x36/0x50 drivers/infiniband/core/ucma.c:185 ucma_destroy_private_ctx+0x58d/0x5b0 drivers/infiniband/core/ucma.c:576 ucma_close+0x91/0xd0 drivers/infiniband/core/ucma.c:1797 __fput+0x169/0x540 fs/file_table.c:280 task_work_run+0xb7/0x100 kernel/task_work.c:140 exit_task_work include/linux/task_work.h:30 [inline] do_exit+0x7da/0x17f0 kernel/exit.c:825 do_group_exit+0x9e/0x190 kernel/exit.c:922 __do_sys_exit_group kernel/exit.c:933 [inline] __se_sys_exit_group kernel/exit.c:931 [inline] __x64_sys_exit_group+0x2d/0x30 kernel/exit.c:931 do_syscall_64+0x2d/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 255d0c14b375 ("RDMA/cma: rdma_bind_addr() leaks a cma_dev reference count") Link: https://lore.kernel.org/r/3352ee288fe34f2b44220457a29bfc0548686363.162071173... Signed-off-by: Shay Drory shayd@nvidia.com Signed-off-by: Leon Romanovsky leonro@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/cma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index ecac62a7b59e..92428990f0cc 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -530,6 +530,7 @@ static void cma_release_dev(struct rdma_id_private *id_priv) list_del(&id_priv->list); cma_deref_dev(id_priv->cma_dev); id_priv->cma_dev = NULL; + id_priv->id.device = NULL; if (id_priv->id.route.addr.dev_addr.sgid_attr) { rdma_put_gid_attr(id_priv->id.route.addr.dev_addr.sgid_attr); id_priv->id.route.addr.dev_addr.sgid_attr = NULL; @@ -1871,6 +1872,7 @@ void rdma_destroy_id(struct rdma_cm_id *id) iw_destroy_cm_id(id_priv->cm_id.iw); } cma_leave_mc_groups(id_priv); + rdma_restrack_del(&id_priv->res); cma_release_dev(id_priv); }

@@ -3580,7 +3582,7 @@ int rdma_listen(struct rdma_cm_id *id, int backlog) }

id_priv->backlog = backlog; - if (id->device) { + if (id_priv->cma_dev) { if (rdma_cap_ib_cm(id->device, 1)) { ret = cma_ib_listen(id_priv); if (ret)

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 3a53587423d25c87af4b4126a806a0575104b45e ]

init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems where the Dell WMI interface is supported. While exit_dell_smbios_wmi() unregisters it unconditionally, this leads to the following oops:

[ 175.722921] ------------[ cut here ]------------ [ 175.722925] Unexpected driver unregister! [ 175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40 ... [ 175.723089] Call Trace: [ 175.723094] cleanup_module+0x5/0xedd [dell_smbios] ... [ 175.723148] ---[ end trace 064c34e1ad49509d ]---

Make the unregister happen on the same condition the register happens to fix this.

Cc: Mario Limonciello mario.limonciello@outlook.com Fixes: 1a258e670434 ("platform/x86: dell-smbios-wmi: Add new WMI dispatcher driver") Signed-off-by: Hans de Goede hdegoede@redhat.com Reviewed-by: Mario Limonciello mario.limonciello@outlook.com Reviewed-by: Mark Gross mgross@linux.intel.com Link: https://lore.kernel.org/r/20210518125027.21824-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/dell-smbios-wmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/dell-smbios-wmi.c b/drivers/platform/x86/dell-smbios-wmi.c index 27a298b7c541..c97bd4a45242 100644 --- a/drivers/platform/x86/dell-smbios-wmi.c +++ b/drivers/platform/x86/dell-smbios-wmi.c @@ -271,7 +271,8 @@ int init_dell_smbios_wmi(void)

void exit_dell_smbios_wmi(void) { - wmi_driver_unregister(&dell_smbios_wmi_driver); + if (wmi_supported) + wmi_driver_unregister(&dell_smbios_wmi_driver); }

MODULE_DEVICE_TABLE(wmi, dell_smbios_wmi_id_table);

From: Oleg Nesterov oleg@redhat.com

[ Upstream commit dbb5afad100a828c97e012c6106566d99f041db6 ]

Suppose we have 2 threads, the group-leader L and a sub-theread T, both parked in ptrace_stop(). Debugger tries to resume both threads and does

ptrace(PTRACE_CONT, T); ptrace(PTRACE_CONT, L);

If the sub-thread T execs in between, the 2nd PTRACE_CONT doesn not resume the old leader L, it resumes the post-exec thread T which was actually now stopped in PTHREAD_EVENT_EXEC. In this case the PTHREAD_EVENT_EXEC event is lost, and the tracer can't know that the tracee changed its pid.

This patch makes ptrace() fail in this case until debugger does wait() and consumes PTHREAD_EVENT_EXEC which reports old_pid. This affects all ptrace requests except the "asynchronous" PTRACE_INTERRUPT/KILL.

The patch doesn't add the new PTRACE_ option to not complicate the API, and I _hope_ this won't cause any noticeable regression:

- If debugger uses PTRACE_O_TRACEEXEC and the thread did an exec and the tracer does a ptrace request without having consumed the exec event, it's 100% sure that the thread the ptracer thinks it is targeting does not exist anymore, or isn't the same as the one it thinks it is targeting.

- To some degree this patch adds nothing new. In the scenario above ptrace(L) can fail with -ESRCH if it is called after the execing sub-thread wakes the leader up and before it "steals" the leader's pid.

Test-case:

#include <stdio.h> #include <unistd.h> #include <signal.h> #include <sys/ptrace.h> #include <sys/wait.h> #include <errno.h> #include <pthread.h> #include <assert.h>

void *tf(void *arg) { execve("/usr/bin/true", NULL, NULL); assert(0);

return NULL; }

int main(void) { int leader = fork(); if (!leader) { kill(getpid(), SIGSTOP);

pthread_t th; pthread_create(&th, NULL, tf, NULL); for (;;) pause();

return 0; }

waitpid(leader, NULL, WSTOPPED);

ptrace(PTRACE_SEIZE, leader, 0, PTRACE_O_TRACECLONE | PTRACE_O_TRACEEXEC); waitpid(leader, NULL, 0);

ptrace(PTRACE_CONT, leader, 0,0); waitpid(leader, NULL, 0);

int status, thread = waitpid(-1, &status, 0); assert(thread > 0 && thread != leader); assert(status == 0x80137f);

ptrace(PTRACE_CONT, thread, 0,0); /* * waitid() because waitpid(leader, &status, WNOWAIT) does not * report status. Why ???? * * Why WEXITED? because we have another kernel problem connected * to mt-exec. */ siginfo_t info; assert(waitid(P_PID, leader, &info, WSTOPPED|WEXITED|WNOWAIT) == 0); assert(info.si_pid == leader && info.si_status == 0x0405);

/* OK, it sleeps in ptrace(PTRACE_EVENT_EXEC == 0x04) */ assert(ptrace(PTRACE_CONT, leader, 0,0) == -1); assert(errno == ESRCH);

assert(leader == waitpid(leader, &status, WNOHANG)); assert(status == 0x04057f);

assert(ptrace(PTRACE_CONT, leader, 0,0) == 0);

return 0; }

Signed-off-by: Oleg Nesterov oleg@redhat.com Reported-by: Simon Marchi simon.marchi@efficios.com Acked-by: "Eric W. Biederman" ebiederm@xmission.com Acked-by: Pedro Alves palves@redhat.com Acked-by: Simon Marchi simon.marchi@efficios.com Acked-by: Jan Kratochvil jan.kratochvil@redhat.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/ptrace.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 79de1294f8eb..eb4d04cb3aaf 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -169,6 +169,21 @@ void __ptrace_unlink(struct task_struct *child) spin_unlock(&child->sighand->siglock); }

+static bool looks_like_a_spurious_pid(struct task_struct *task) +{ + if (task->exit_code != ((PTRACE_EVENT_EXEC << 8) | SIGTRAP)) + return false; + + if (task_pid_vnr(task) == task->ptrace_message) + return false; + /* + * The tracee changed its pid but the PTRACE_EVENT_EXEC event + * was not wait()'ed, most probably debugger targets the old + * leader which was destroyed in de_thread(). + */ + return true; +} + /* Ensure that nothing can wake it up, even SIGKILL */ static bool ptrace_freeze_traced(struct task_struct *task) { @@ -179,7 +194,8 @@ static bool ptrace_freeze_traced(struct task_struct *task) return ret;

spin_lock_irq(&task->sighand->siglock); - if (task_is_traced(task) && !__fatal_signal_pending(task)) { + if (task_is_traced(task) && !looks_like_a_spurious_pid(task) && + !__fatal_signal_pending(task)) { task->state = __TASK_TRACED; ret = true; }

From: Zqiang qiang.zhang@windriver.com

[ Upstream commit 3a010c493271f04578b133de977e0e5dd2848cea ]

When a interruptible mutex locker is interrupted by a signal without acquiring this lock and removed from the wait queue. if the mutex isn't contended enough to have a waiter put into the wait queue again, the setting of the WAITER bit will force mutex locker to go into the slowpath to acquire the lock every time, so if the wait queue is empty, the WAITER bit need to be clear.

Fixes: 040a0a371005 ("mutex: Add support for wound/wait style locks") Suggested-by: Peter Zijlstra peterz@infradead.org Signed-off-by: Zqiang qiang.zhang@windriver.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lkml.kernel.org/r/20210517034005.30828-1-qiang.zhang@windriver.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/locking/mutex-debug.c | 4 ++-- kernel/locking/mutex-debug.h | 2 +- kernel/locking/mutex.c | 18 +++++++++++++----- kernel/locking/mutex.h | 4 +--- 4 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c index 771d4ca96dda..4fe40910f471 100644 --- a/kernel/locking/mutex-debug.c +++ b/kernel/locking/mutex-debug.c @@ -57,7 +57,7 @@ void debug_mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter, task->blocked_on = waiter; }

-void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter, +void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter, struct task_struct *task) { DEBUG_LOCKS_WARN_ON(list_empty(&waiter->list)); @@ -65,7 +65,7 @@ void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter, DEBUG_LOCKS_WARN_ON(task->blocked_on != waiter); task->blocked_on = NULL;

- list_del_init(&waiter->list); + INIT_LIST_HEAD(&waiter->list); waiter->task = NULL; }

diff --git a/kernel/locking/mutex-debug.h b/kernel/locking/mutex-debug.h index 1edd3f45a4ec..53e631e1d76d 100644 --- a/kernel/locking/mutex-debug.h +++ b/kernel/locking/mutex-debug.h @@ -22,7 +22,7 @@ extern void debug_mutex_free_waiter(struct mutex_waiter *waiter); extern void debug_mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter, struct task_struct *task); -extern void mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter, +extern void debug_mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter, struct task_struct *task); extern void debug_mutex_unlock(struct mutex *lock); extern void debug_mutex_init(struct mutex *lock, const char *name, diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c index 07a9f9f46e03..c0c7784f074b 100644 --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -204,7 +204,7 @@ static inline bool __mutex_waiter_is_first(struct mutex *lock, struct mutex_wait * Add @waiter to a given location in the lock wait_list and set the * FLAG_WAITERS flag if it's the first waiter. */ -static void __sched +static void __mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter, struct list_head *list) { @@ -215,6 +215,16 @@ __mutex_add_waiter(struct mutex *lock, struct mutex_waiter *waiter, __mutex_set_flag(lock, MUTEX_FLAG_WAITERS); }

+static void +__mutex_remove_waiter(struct mutex *lock, struct mutex_waiter *waiter) +{ + list_del(&waiter->list); + if (likely(list_empty(&lock->wait_list))) + __mutex_clear_flag(lock, MUTEX_FLAGS); + + debug_mutex_remove_waiter(lock, waiter, current); +} + /* * Give up ownership to a specific task, when @task = NULL, this is equivalent * to a regular unlock. Sets PICKUP on a handoff, clears HANDOF, preserves @@ -1071,9 +1081,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass, __ww_mutex_check_waiters(lock, ww_ctx); }

- mutex_remove_waiter(lock, &waiter, current); - if (likely(list_empty(&lock->wait_list))) - __mutex_clear_flag(lock, MUTEX_FLAGS); + __mutex_remove_waiter(lock, &waiter);

debug_mutex_free_waiter(&waiter);

@@ -1090,7 +1098,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,

err: __set_current_state(TASK_RUNNING); - mutex_remove_waiter(lock, &waiter, current); + __mutex_remove_waiter(lock, &waiter); err_early_kill: spin_unlock(&lock->wait_lock); debug_mutex_free_waiter(&waiter); diff --git a/kernel/locking/mutex.h b/kernel/locking/mutex.h index 1c2287d3fa71..f0c710b1d192 100644 --- a/kernel/locking/mutex.h +++ b/kernel/locking/mutex.h @@ -10,12 +10,10 @@ * !CONFIG_DEBUG_MUTEXES case. Most of them are NOPs: */

-#define mutex_remove_waiter(lock, waiter, task) \ - __list_del((waiter)->list.prev, (waiter)->list.next) - #define debug_mutex_wake_waiter(lock, waiter) do { } while (0) #define debug_mutex_free_waiter(waiter) do { } while (0) #define debug_mutex_add_waiter(lock, waiter, ti) do { } while (0) +#define debug_mutex_remove_waiter(lock, waiter, ti) do { } while (0) #define debug_mutex_unlock(lock) do { } while (0) #define debug_mutex_init(lock, name, key) do { } while (0)

From: Ronnie Sahlberg lsahlber@redhat.com

commit d201d7631ca170b038e7f8921120d05eec70d7c5 upstream.

When using smb2_copychunk_range() for large ranges we will run through several iterations of a loop calling SMB2_ioctl() but never actually free the returned buffer except for the final iteration. This leads to memory leaks everytime a large copychunk is requested.

Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files") Cc: stable@vger.kernel.org Reviewed-by: Aurelien Aptel aaptel@suse.com Signed-off-by: Ronnie Sahlberg lsahlber@redhat.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/cifs/smb2ops.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -1673,6 +1673,8 @@ smb2_copychunk_range(const unsigned int cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk));

/* Request server copy to target from src identified by key */ + kfree(retbuf); + retbuf = NULL; rc = SMB2_ioctl(xid, tcon, trgtfile->fid.persistent_fid, trgtfile->fid.volatile_fid, FSCTL_SRV_COPYCHUNK_WRITE, true /* is_fsctl */, (char *)pcchunk,

From: Takashi Iwai tiwai@suse.de

commit c1f0616124c455c5c762b6f123e40bba5df759e6 upstream.

The interrupt handler of intel8x0 calls snd_intel8x0_update() whenever the hardware sets the corresponding status bit for each stream. This works fine for most cases as long as the hardware behaves properly. But when the hardware gives a wrong bit set, this leads to a zero- division Oops, and reportedly, this seems what happened on a VM.

For fixing the crash, this patch adds a internal flag indicating that the stream is ready to be updated, and check it (as well as the flag being in suspended) to ignore such spurious update.

Cc: stable@vger.kernel.org Reported-and-tested-by: Sergey Senozhatsky senozhatsky@chromium.org Link: https://lore.kernel.org/r/s5h5yzi7uh0.wl-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/intel8x0.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -354,6 +354,7 @@ struct ichdev { unsigned int ali_slot; /* ALI DMA slot */ struct ac97_pcm *pcm; int pcm_open_flag; + unsigned int prepared:1; unsigned int suspended: 1; };

@@ -714,6 +715,9 @@ static inline void snd_intel8x0_update(s int status, civ, i, step; int ack = 0;

+ if (!ichdev->prepared || ichdev->suspended) + return; + spin_lock_irqsave(&chip->reg_lock, flags); status = igetbyte(chip, port + ichdev->roff_sr); civ = igetbyte(chip, port + ICH_REG_OFF_CIV); @@ -907,6 +911,7 @@ static int snd_intel8x0_hw_params(struct if (ichdev->pcm_open_flag) { snd_ac97_pcm_close(ichdev->pcm); ichdev->pcm_open_flag = 0; + ichdev->prepared = 0; } err = snd_ac97_pcm_open(ichdev->pcm, params_rate(hw_params), params_channels(hw_params), @@ -928,6 +933,7 @@ static int snd_intel8x0_hw_free(struct s if (ichdev->pcm_open_flag) { snd_ac97_pcm_close(ichdev->pcm); ichdev->pcm_open_flag = 0; + ichdev->prepared = 0; } return snd_pcm_lib_free_pages(substream); } @@ -1002,6 +1008,7 @@ static int snd_intel8x0_pcm_prepare(stru ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1; } snd_intel8x0_setup_periods(chip, ichdev); + ichdev->prepared = 1; return 0; }

From: Takashi Sakamoto o-takashi@sakamocchi.jp

commit 1b6604896e78969baffc1b6cc6bc175f95929ac4 upstream.

Alesis iO 26 FireWire has two pairs of digital optical interface. It delivers PCM frames from the interfaces by second isochronous packet streaming. Although both of the interfaces are available at 44.1/48.0 kHz, first one of them is only available at 88.2/96.0 kHz. It reduces the number of PCM samples to 4 in Multi Bit Linear Audio data channel of data blocks on the second isochronous packet streaming.

This commit fixes hardcoded stream formats.

Cc: stable@vger.kernel.org Fixes: 28b208f600a3 ("ALSA: dice: add parameters of stream formats for models produced by Alesis") Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp Link: https://lore.kernel.org/r/20210513125652.110249-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/firewire/dice/dice-alesis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/firewire/dice/dice-alesis.c +++ b/sound/firewire/dice/dice-alesis.c @@ -16,7 +16,7 @@ alesis_io14_tx_pcm_chs[MAX_STREAMS][SND_ static const unsigned int alesis_io26_tx_pcm_chs[MAX_STREAMS][SND_DICE_RATE_MODE_COUNT] = { {10, 10, 4}, /* Tx0 = Analog + S/PDIF. */ - {16, 8, 0}, /* Tx1 = ADAT1 + ADAT2. */ + {16, 4, 0}, /* Tx1 = ADAT1 + ADAT2 (available at low rate). */ };

int snd_dice_detect_alesis_formats(struct snd_dice *dice)

From: Takashi Iwai tiwai@suse.de

commit e84749a78dc82bc545f12ce009e3dbcc2c5a8a91 upstream.

snd_usbmidi_get_ms_info() may access beyond the border when a malformed descriptor is passed. This patch adds the sanity checks of the given MS endpoint descriptors, and skips invalid ones.

Reported-by: syzbot+6bb23a5d5548b93c94aa@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210510150659.17710-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/usb/midi.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/sound/usb/midi.c +++ b/sound/usb/midi.c @@ -1889,8 +1889,12 @@ static int snd_usbmidi_get_ms_info(struc ms_ep = find_usb_ms_endpoint_descriptor(hostep); if (!ms_ep) continue; + if (ms_ep->bLength <= sizeof(*ms_ep)) + continue; if (ms_ep->bNumEmbMIDIJack > 0x10) continue; + if (ms_ep->bLength < sizeof(*ms_ep) + ms_ep->bNumEmbMIDIJack) + continue; if (usb_endpoint_dir_out(ep)) { if (endpoints[epidx].out_ep) { if (++epidx >= MIDI_MAX_ENDPOINTS) {

From: Daniel Cordova A danesc87@gmail.com

commit c1b55029493879f5bd585ff79f326e71f0bc05e3 upstream.

The GU502 requires a few steps to make headset i/o works properly: pincfg, verbs to unmute headphone out and callback to toggle output between speakers and headphone using jack.

Signed-off-by: Daniel Cordova A danesc87@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210507173116.12043-1-danesc87@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 62 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 62 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6120,6 +6120,35 @@ static void alc294_fixup_gx502_hp(struct } }

+static void alc294_gu502_toggle_output(struct hda_codec *codec, + struct hda_jack_callback *cb) +{ + /* Windows sets 0x10 to 0x8420 for Node 0x20 which is + * responsible from changes between speakers and headphones + */ + if (snd_hda_jack_detect_state(codec, 0x21) == HDA_JACK_PRESENT) + alc_write_coef_idx(codec, 0x10, 0x8420); + else + alc_write_coef_idx(codec, 0x10, 0x0a20); +} + +static void alc294_fixup_gu502_hp(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + if (!is_jack_detectable(codec, 0x21)) + return; + + switch (action) { + case HDA_FIXUP_ACT_PRE_PROBE: + snd_hda_jack_detect_enable_callback(codec, 0x21, + alc294_gu502_toggle_output); + break; + case HDA_FIXUP_ACT_INIT: + alc294_gu502_toggle_output(codec, NULL); + break; + } +} + static void alc285_fixup_hp_gpio_amp_init(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -6316,6 +6345,9 @@ enum { ALC294_FIXUP_ASUS_GX502_HP, ALC294_FIXUP_ASUS_GX502_PINS, ALC294_FIXUP_ASUS_GX502_VERBS, + ALC294_FIXUP_ASUS_GU502_HP, + ALC294_FIXUP_ASUS_GU502_PINS, + ALC294_FIXUP_ASUS_GU502_VERBS, ALC285_FIXUP_HP_GPIO_LED, ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED, @@ -7540,6 +7572,35 @@ static const struct hda_fixup alc269_fix .type = HDA_FIXUP_FUNC, .v.func = alc294_fixup_gx502_hp, }, + [ALC294_FIXUP_ASUS_GU502_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x19, 0x01a11050 }, /* rear HP mic */ + { 0x1a, 0x01a11830 }, /* rear external mic */ + { 0x21, 0x012110f0 }, /* rear HP out */ + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_GU502_VERBS + }, + [ALC294_FIXUP_ASUS_GU502_VERBS] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* set 0x15 to HP-OUT ctrl */ + { 0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, + /* unmute the 0x15 amp */ + { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000 }, + /* set 0x1b to HP-OUT */ + { 0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_GU502_HP + }, + [ALC294_FIXUP_ASUS_GU502_HP] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc294_fixup_gu502_hp, + }, [ALC294_FIXUP_ASUS_COEF_1B] = { .type = HDA_FIXUP_VERBS, .v.verbs = (const struct hda_verb[]) { @@ -7971,6 +8032,7 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1d4e, "ASUS TM420", ALC256_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1e11, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA502), + SND_PCI_QUIRK(0x1043, 0x1e51, "ASUS Zephyrus M15", ALC294_FIXUP_ASUS_GU502_PINS), SND_PCI_QUIRK(0x1043, 0x1e8e, "ASUS Zephyrus G15", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1f11, "ASUS Zephyrus G14", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x3030, "ASUS ZN270IE", ALC256_FIXUP_ASUS_AIO_GPIO2),

From: Takashi Sakamoto o-takashi@sakamocchi.jp

commit 395f41e2cdac63e7581fb9574e5ac0f02556e34a upstream.

The check for size of isochronous packet payload just cares of the size of IR context payload without the size of CIP header.

Cc: stable@vger.kernel.org Fixes: f11453c7cc01 ("ALSA: firewire-lib: use 16 bytes IR context header to separate CIP header") Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp Link: https://lore.kernel.org/r/20210513125652.110249-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/firewire/amdtp-stream.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/sound/firewire/amdtp-stream.c +++ b/sound/firewire/amdtp-stream.c @@ -617,18 +617,24 @@ static int parse_ir_ctx_header(struct am unsigned int *syt, unsigned int index) { const __be32 *cip_header; + unsigned int cip_header_size; int err;

*payload_length = be32_to_cpu(ctx_header[0]) >> ISO_DATA_LENGTH_SHIFT; - if (*payload_length > s->ctx_data.tx.ctx_header_size + - s->ctx_data.tx.max_ctx_payload_length) { + + if (!(s->flags & CIP_NO_HEADER)) + cip_header_size = 8; + else + cip_header_size = 0; + + if (*payload_length > cip_header_size + s->ctx_data.tx.max_ctx_payload_length) { dev_err(&s->unit->device, "Detect jumbo payload: %04x %04x\n", - *payload_length, s->ctx_data.tx.max_ctx_payload_length); + *payload_length, cip_header_size + s->ctx_data.tx.max_ctx_payload_length); return -EIO; }

- if (!(s->flags & CIP_NO_HEADER)) { + if (cip_header_size > 0) { cip_header = ctx_header + 2; err = check_cip_header(s, cip_header, *payload_length, data_blocks, data_block_counter, syt);

From: PeiSen Hou pshou@realtek.com

commit 1d5cfca286178ce81fb0c8a5f5777ef123cd69e4 upstream.

Fix "use as headset mic, without its own jack detect" problen.

Signed-off-by: PeiSen Hou pshou@realtek.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/d0746eaf29f248a5acc30313e3ba4f99@realtek.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8092,12 +8092,19 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x1558, 0x50b8, "Clevo NK50SZ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x50d5, "Clevo NP50D5", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x50f0, "Clevo NH50A[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x50f2, "Clevo NH50E[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x50f3, "Clevo NH58DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x50f5, "Clevo NH55EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x50f6, "Clevo NH55DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x5101, "Clevo S510WU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x5157, "Clevo W517GU1", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x51a1, "Clevo NS50MU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x70a1, "Clevo NB70T[HJK]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x70b3, "Clevo NK70SB", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x70f2, "Clevo NH79EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x70f3, "Clevo NH77DPQ", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x70f4, "Clevo NH77EPY", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x70f6, "Clevo NH77DPQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8228, "Clevo NR40BU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8520, "Clevo NH50D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8521, "Clevo NH77D[CD]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), @@ -8115,9 +8122,17 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x1558, 0x8a51, "Clevo NH70RCQ-Y", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x8d50, "Clevo NH55RCQ-M", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x951d, "Clevo N950T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0x9600, "Clevo N960K[PR]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x961d, "Clevo N960S[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0x971d, "Clevo N970T[CDF]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1558, 0xa500, "Clevo NL53RU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xa600, "Clevo NL5XNU", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xb018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xb019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xb022, "Clevo NH77D[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xc018, "Clevo NP50D[BE]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xc019, "Clevo NH77D[BE]Q", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1558, 0xc022, "Clevo NH77[DC][QW]", ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC233_FIXUP_LENOVO_MULTI_CODECS), SND_PCI_QUIRK(0x17aa, 0x1048, "ThinkCentre Station", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),

From: Takashi Iwai tiwai@suse.de

commit 5d84b5318d860c9d80ca5dfae0e971ede53b4921 upstream.

HP OMEN dc0019-ur with codec SSID 103c:84da requires the pin config overrides and the existing mic/mute LED setup. This patch implements those in the fixup table.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212733 Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210504121832.4558-1-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6390,6 +6390,7 @@ enum { ALC256_FIXUP_ASUS_HPE, ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK, ALC295_FIXUP_ASUS_DACS, + ALC295_FIXUP_HP_OMEN, };

static const struct hda_fixup alc269_fixups[] = { @@ -7859,6 +7860,26 @@ static const struct hda_fixup alc269_fix .type = HDA_FIXUP_FUNC, .v.func = alc295_fixup_asus_dacs, }, + [ALC295_FIXUP_HP_OMEN] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x12, 0xb7a60130 }, + { 0x13, 0x40000000 }, + { 0x14, 0x411111f0 }, + { 0x16, 0x411111f0 }, + { 0x17, 0x90170110 }, + { 0x18, 0x411111f0 }, + { 0x19, 0x02a11030 }, + { 0x1a, 0x411111f0 }, + { 0x1b, 0x04a19030 }, + { 0x1d, 0x40600001 }, + { 0x1e, 0x411111f0 }, + { 0x21, 0x03211020 }, + {} + }, + .chained = true, + .chain_id = ALC269_FIXUP_HP_LINE1_MIC1_LED, + }, };

static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -8009,6 +8030,7 @@ static const struct snd_pci_quirk alc269 SND_PCI_QUIRK(0x103c, 0x82c0, "HP G3 mini premium", ALC221_FIXUP_HP_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x83b9, "HP Spectre x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x8497, "HP Envy x360", ALC269_FIXUP_HP_MUTE_LED_MIC3), + SND_PCI_QUIRK(0x103c, 0x84da, "HP OMEN dc0019-ur", ALC295_FIXUP_HP_OMEN), SND_PCI_QUIRK(0x103c, 0x84e7, "HP Pavilion 15", ALC269_FIXUP_HP_MUTE_LED_MIC3), SND_PCI_QUIRK(0x103c, 0x869d, "HP", ALC236_FIXUP_HP_MUTE_LED), SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED), @@ -8413,6 +8435,7 @@ static const struct hda_model_fixup alc2 {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"}, {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"}, {.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"}, + {.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"}, {} }; #define ALC225_STANDARD_PINS \

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

commit 3ee098f96b8b6c1a98f7f97915f8873164e6af9d upstream.

If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer.

In such a case, we need to free the buffer explicitly.

Fixes: cdfa835c6e5e ("uio_hv_generic: defer opening vmbus until first use") Cc: stable stable@vger.kernel.org Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/4fdaff557deef6f0475d02ba7922ddbaa1ab08a6.162054405... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/uio/uio_hv_generic.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/uio/uio_hv_generic.c +++ b/drivers/uio/uio_hv_generic.c @@ -296,8 +296,10 @@ hv_uio_probe(struct hv_device *dev,

ret = vmbus_establish_gpadl(channel, pdata->recv_buf, RECV_BUFFER_SIZE, &pdata->recv_gpadl); - if (ret) + if (ret) { + vfree(pdata->recv_buf); goto fail_close; + }

/* put Global Physical Address Label in name */ snprintf(pdata->recv_name, sizeof(pdata->recv_name), @@ -316,8 +318,10 @@ hv_uio_probe(struct hv_device *dev,

ret = vmbus_establish_gpadl(channel, pdata->send_buf, SEND_BUFFER_SIZE, &pdata->send_gpadl); - if (ret) + if (ret) { + vfree(pdata->send_buf); goto fail_close; + }

snprintf(pdata->send_name, sizeof(pdata->send_name), "send:%u", pdata->send_gpadl);

From: Anirudh Rayabharam mail@anirudhrb.com

commit 69ce3ae36dcb03cdf416b0862a45369ddbf50fdf upstream.

In case create_workqueue() fails, release all resources and return -ENOMEM to caller to avoid potential NULL pointer deref later. Move up the create_workequeue() call to return early and avoid unwinding the call to riocm_rx_fill().

Cc: Alexandre Bounine alex.bou9@gmail.com Cc: Matt Porter mporter@kernel.crashing.org Cc: Andrew Morton akpm@linux-foundation.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: stable stable@vger.kernel.org Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Link: https://lore.kernel.org/r/20210503115736.2104747-46-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/rapidio/rio_cm.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/rapidio/rio_cm.c +++ b/drivers/rapidio/rio_cm.c @@ -2127,6 +2127,14 @@ static int riocm_add_mport(struct device return -ENODEV; }

+ cm->rx_wq = create_workqueue(DRV_NAME "/rxq"); + if (!cm->rx_wq) { + rio_release_inb_mbox(mport, cmbox); + rio_release_outb_mbox(mport, cmbox); + kfree(cm); + return -ENOMEM; + } + /* * Allocate and register inbound messaging buffers to be ready * to receive channel and system management requests @@ -2137,7 +2145,6 @@ static int riocm_add_mport(struct device cm->rx_slots = RIOCM_RX_RING_SIZE; mutex_init(&cm->rx_lock); riocm_rx_fill(cm, RIOCM_RX_RING_SIZE); - cm->rx_wq = create_workqueue(DRV_NAME "/rxq"); INIT_WORK(&cm->rx_work, rio_ibmsg_handler);

cm->tx_slot = 0;

From: Changfeng Changfeng.Zhu@amd.com

commit dbd1003d1252db5973dddf20b24bb0106ac52aa2 upstream.

There is problem with 3DCGCG firmware and it will cause compute test hang on picasso/raven1. It needs to disable 3DCGCG in driver to avoid compute hang.

Signed-off-by: Changfeng Changfeng.Zhu@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Reviewed-by: Huang Rui ray.huang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 10 +++++++--- drivers/gpu/drm/amd/amdgpu/soc15.c | 2 -- 2 files changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -4661,7 +4661,7 @@ static void gfx_v9_0_update_3d_clock_gat amdgpu_gfx_rlc_enter_safe_mode(adev);

/* Enable 3D CGCG/CGLS */ - if (enable && (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG)) { + if (enable) { /* write cmd to clear cgcg/cgls ov */ def = data = RREG32_SOC15(GC, 0, mmRLC_CGTT_MGCG_OVERRIDE); /* unset CGCG override */ @@ -4673,8 +4673,12 @@ static void gfx_v9_0_update_3d_clock_gat /* enable 3Dcgcg FSM(0x0000363f) */ def = RREG32_SOC15(GC, 0, mmRLC_CGCG_CGLS_CTRL_3D);

- data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) | - RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK; + if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGCG) + data = (0x36 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT) | + RLC_CGCG_CGLS_CTRL_3D__CGCG_EN_MASK; + else + data = 0x0 << RLC_CGCG_CGLS_CTRL_3D__CGCG_GFX_IDLE_THRESHOLD__SHIFT; + if (adev->cg_flags & AMD_CG_SUPPORT_GFX_3D_CGLS) data |= (0x000F << RLC_CGCG_CGLS_CTRL_3D__CGLS_REP_COMPANSAT_DELAY__SHIFT) | RLC_CGCG_CGLS_CTRL_3D__CGLS_EN_MASK; --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1132,7 +1132,6 @@ static int soc15_common_early_init(void adev->cg_flags = AMD_CG_SUPPORT_GFX_MGCG | AMD_CG_SUPPORT_GFX_MGLS | AMD_CG_SUPPORT_GFX_CP_LS | - AMD_CG_SUPPORT_GFX_3D_CGCG | AMD_CG_SUPPORT_GFX_3D_CGLS | AMD_CG_SUPPORT_GFX_CGCG | AMD_CG_SUPPORT_GFX_CGLS | @@ -1152,7 +1151,6 @@ static int soc15_common_early_init(void AMD_CG_SUPPORT_GFX_MGLS | AMD_CG_SUPPORT_GFX_RLC_LS | AMD_CG_SUPPORT_GFX_CP_LS | - AMD_CG_SUPPORT_GFX_3D_CGCG | AMD_CG_SUPPORT_GFX_3D_CGLS | AMD_CG_SUPPORT_GFX_CGCG | AMD_CG_SUPPORT_GFX_CGLS |

From: Guchun Chen guchun.chen@amd.com

commit 77194d8642dd4cb7ea8ced77bfaea55610574c38 upstream.

Current golden setting is out of date.

Signed-off-by: Guchun Chen guchun.chen@amd.com Reviewed-by: Kenneth Feng kenneth.feng@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c @@ -100,6 +100,10 @@ static const struct soc15_reg_golden gol

static const struct soc15_reg_golden golden_settings_sdma_nv12[] = { SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG, 0x001877ff, 0x00000044), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG, 0x001877ff, 0x00000044), + SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x001877ff, 0x00000044), SOC15_REG_GOLDEN_VALUE(GC, 0, mmSDMA1_RLC3_RB_WPTR_POLL_CNTL, 0xfffffff7, 0x00403000), };

From: Jan Beulich jbeulich@suse.com

commit c81d3d24602540f65256f98831d0a25599ea6b87 upstream.

When multiple PCI devices get assigned to a guest right at boot, libxl incrementally populates the backend tree. The writes for the first of the devices trigger the backend watch. In turn xen_pcibk_setup_backend() will set the XenBus state to Initialised, at which point no further reconfigures would happen unless a device got hotplugged. Arrange for reconfigure to also get triggered from the backend watch handler.

Signed-off-by: Jan Beulich jbeulich@suse.com Cc: stable@vger.kernel.org Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Link: https://lore.kernel.org/r/2337cbd6-94b9-4187-9862-c03ea12e0c61@suse.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/xen/xen-pciback/xenbus.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)

--- a/drivers/xen/xen-pciback/xenbus.c +++ b/drivers/xen/xen-pciback/xenbus.c @@ -358,7 +358,8 @@ out: return err; }

-static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev) +static int xen_pcibk_reconfigure(struct xen_pcibk_device *pdev, + enum xenbus_state state) { int err = 0; int num_devs; @@ -372,9 +373,7 @@ static int xen_pcibk_reconfigure(struct dev_dbg(&pdev->xdev->dev, "Reconfiguring device ...\n");

mutex_lock(&pdev->dev_lock); - /* Make sure we only reconfigure once */ - if (xenbus_read_driver_state(pdev->xdev->nodename) != - XenbusStateReconfiguring) + if (xenbus_read_driver_state(pdev->xdev->nodename) != state) goto out;

err = xenbus_scanf(XBT_NIL, pdev->xdev->nodename, "num_devs", "%d", @@ -499,6 +498,10 @@ static int xen_pcibk_reconfigure(struct } }

+ if (state != XenbusStateReconfiguring) + /* Make sure we only reconfigure once. */ + goto out; + err = xenbus_switch_state(pdev->xdev, XenbusStateReconfigured); if (err) { xenbus_dev_fatal(pdev->xdev, err, @@ -524,7 +527,7 @@ static void xen_pcibk_frontend_changed(s break;

case XenbusStateReconfiguring: - xen_pcibk_reconfigure(pdev); + xen_pcibk_reconfigure(pdev, XenbusStateReconfiguring); break;

case XenbusStateConnected: @@ -663,6 +666,15 @@ static void xen_pcibk_be_watch(struct xe xen_pcibk_setup_backend(pdev); break;

+ case XenbusStateInitialised: + /* + * We typically move to Initialised when the first device was + * added. Hence subsequent devices getting added may need + * reconfiguring. + */ + xen_pcibk_reconfigure(pdev, XenbusStateInitialised); + break; + default: break; }

From: Mikulas Patocka mpatocka@redhat.com

commit c699a0db2d62e3bbb7f0bf35c87edbc8d23e3062 upstream.

The following commands will crash the kernel:

modprobe brd rd_size=1048576 dmsetup create o --table "0 `blockdev --getsize /dev/ram0` snapshot-origin /dev/ram0" dmsetup create s --table "0 `blockdev --getsize /dev/ram0` snapshot /dev/ram0 /dev/ram1 N 0"

The reason is that when we test for zero chunk size, we jump to the label bad_read_metadata without setting the "r" variable. The function snapshot_ctr destroys all the structures and then exits with "r == 0". The kernel then crashes because it falsely believes that snapshot_ctr succeeded.

In order to fix the bug, we set the variable "r" to -EINVAL.

Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer snitzer@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-snap.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -1407,6 +1407,7 @@ static int snapshot_ctr(struct dm_target

if (!s->store->chunk_size) { ti->error = "Chunk size not set"; + r = -EINVAL; goto bad_read_metadata; }

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit bee1b0511844c8c79fccf1f2b13472393b6b91f7 upstream.

This reverts commit f86a3b83833e7cfe558ca4d70b64ebc48903efec.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original commit causes a memory leak when it is trying to claim it is properly handling errors. Revert this change and fix it up properly in a follow-on commit.

Cc: Kangjie Lu kjlu@umn.edu Cc: David S. Miller davem@davemloft.net Fixes: f86a3b83833e ("net: stmicro: fix a missing check of clk_prepare") Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-21-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c @@ -50,9 +50,7 @@ static int sun7i_gmac_init(struct platfo gmac->clk_enabled = 1; } else { clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); - ret = clk_prepare(gmac->tx_clk); - if (ret) - return ret; + clk_prepare(gmac->tx_clk); }

return 0;

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 99ae3417672a6d4a3bf68d4fc43d7c6ca074d477 upstream.

This reverts commit 9aa3aa15f4c2f74f47afd6c5db4b420fadf3f315.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, it was determined that this commit is not needed at all so just revert it. Also, the call to lm80_init_client() was not properly handled, so if error handling is needed in the lm80_probe() function, then it should be done properly, not half-baked like the commit being reverted here did.

Cc: Kangjie Lu kjlu@umn.edu Fixes: 9aa3aa15f4c2 ("hwmon: (lm80) fix a missing check of bus read in lm80 probe") Cc: stable stable@vger.kernel.org Acked-by: Guenter Roeck linux@roeck-us.net Link: https://lore.kernel.org/r/20210503115736.2104747-5-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hwmon/lm80.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)

--- a/drivers/hwmon/lm80.c +++ b/drivers/hwmon/lm80.c @@ -597,7 +597,6 @@ static int lm80_probe(struct i2c_client struct device *dev = &client->dev; struct device *hwmon_dev; struct lm80_data *data; - int rv;

data = devm_kzalloc(dev, sizeof(struct lm80_data), GFP_KERNEL); if (!data) @@ -610,14 +609,8 @@ static int lm80_probe(struct i2c_client lm80_init_client(client);

/* A few vars need to be filled upon startup */ - rv = lm80_read_value(client, LM80_REG_FAN_MIN(1)); - if (rv < 0) - return rv; - data->fan[f_min][0] = rv; - rv = lm80_read_value(client, LM80_REG_FAN_MIN(2)); - if (rv < 0) - return rv; - data->fan[f_min][1] = rv; + data->fan[f_min][0] = lm80_read_value(client, LM80_REG_FAN_MIN(1)); + data->fan[f_min][1] = lm80_read_value(client, LM80_REG_FAN_MIN(2));

hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, lm80_groups);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit e1436df2f2550bc89d832ffd456373fdf5d5b5d7 upstream.

This reverts commit 2c2a7552dd6465e8fde6bc9cccf8d66ed1c1eb72.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The original commit log for this change was incorrect, no "error handling code" was added, things will blow up just as badly as before if any of these cases ever were true. As this BUG_ON() never fired, and most of these checks are "obviously" never going to be true, let's just revert to the original code for now until this gets unwound to be done correctly in the future.

Cc: Aditya Pakki pakki001@umn.edu Fixes: 2c2a7552dd64 ("ecryptfs: replace BUG_ON with error handling code") Cc: stable stable@vger.kernel.org Acked-by: Tyler Hicks code@tyhicks.com Link: https://lore.kernel.org/r/20210503115736.2104747-49-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ecryptfs/crypto.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -311,10 +311,8 @@ static int crypt_scatterlist(struct ecry struct extent_crypt_result ecr; int rc = 0;

- if (!crypt_stat || !crypt_stat->tfm - || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED)) - return -EINVAL; - + BUG_ON(!crypt_stat || !crypt_stat->tfm + || !(crypt_stat->flags & ECRYPTFS_STRUCT_INITIALIZED)); if (unlikely(ecryptfs_verbosity > 0)) { ecryptfs_printk(KERN_DEBUG, "Key size [%zd]; key:\n", crypt_stat->key_size);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 257343d3ed557f11d580d0b7c515dc154f64a42b upstream.

This reverts commit 093c48213ee37c3c3ff1cf5ac1aa2a9d8bc66017.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

Because of this, all submissions from this group must be reverted from the kernel tree and will need to be re-reviewed again to determine if they actually are a valid fix. Until that work is complete, remove this change to ensure that no problems are being introduced into the codebase.

Cc: Wenwen Wang wang6495@umn.edu Cc: Peter Rosin peda@axentia.se Cc: Jens Axboe axboe@kernel.dk Fixes: 093c48213ee3 ("gdrom: fix a memory leak bug") Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-27-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cdrom/gdrom.c | 1 - 1 file changed, 1 deletion(-)

--- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -860,7 +860,6 @@ static void __exit exit_gdrom(void) platform_device_unregister(pd); platform_driver_unregister(&gdrom_driver); kfree(gd.toc); - kfree(gd.cd_info); }

module_init(init_gdrom);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 9183f01b5e6e32eb3f17b5f3f8d5ad5ac9786c49 upstream.

As Peter points out, if we were to disconnect and then reconnect this driver from a device, the "global" state of the device would contain odd values and could cause problems. Fix this up by just initializing the whole thing to 0 at probe() time.

Ideally this would be a per-device variable, but given the age and the total lack of users of it, that would require a lot of s/./->/g changes for really no good reason.

Reported-by: Peter Rosin peda@axentia.se Cc: Jens Axboe axboe@kernel.dk Reviewed-by: Peter Rosin peda@axentia.se Link: https://lore.kernel.org/r/YJP2j6AU82MqEY2M@kroah.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cdrom/gdrom.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/cdrom/gdrom.c +++ b/drivers/cdrom/gdrom.c @@ -740,6 +740,13 @@ static const struct blk_mq_ops gdrom_mq_ static int probe_gdrom(struct platform_device *devptr) { int err; + + /* + * Ensure our "one" device is initialized properly in case of previous + * usages of it + */ + memset(&gd, 0, sizeof(gd)); + /* Start the device */ if (gdrom_execute_diagnostic() != 1) { pr_warning("ATA Probe for GDROM failed\n"); @@ -845,7 +852,7 @@ static struct platform_driver gdrom_driv static int __init init_gdrom(void) { int rc; - gd.toc = NULL; + rc = platform_driver_register(&gdrom_driver); if (rc) return rc;

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 68c5634c4a7278672a3bed00eb5646884257c413 upstream.

This reverts commit 765976285a8c8db3f0eb7f033829a899d0c2786e.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

This commit is not correct, it should not have used unlikely() and is not propagating the error properly to the calling function, so it should be reverted at this point in time. Also, if the check failed, the work queue was still assumed to be allocated, so further accesses would have continued to fail, meaning this patch does nothing to solve the root issues at all.

Cc: Kangjie Lu kjlu@umn.edu Cc: Kalle Valo kvalo@codeaurora.org Cc: Bryan Brattlof hello@bryanbrattlof.com Fixes: 765976285a8c ("rtlwifi: fix a potential NULL pointer dereference") Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-13-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/realtek/rtlwifi/base.c | 5 ----- 1 file changed, 5 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c +++ b/drivers/net/wireless/realtek/rtlwifi/base.c @@ -448,11 +448,6 @@ static void _rtl_init_deferred_work(stru /* <2> work queue */ rtlpriv->works.hw = hw; rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name); - if (unlikely(!rtlpriv->works.rtl_wq)) { - pr_err("Failed to allocate work queue\n"); - return; - } - INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq, (void *)rtl_watchdog_wq_callback); INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 7930742d6a0ff091c85b92ef4e076432d8d8cb79 upstream.

This reverts commit 26fd962bde0b15e54234fe762d86bc0349df1de4.

Because of recent interactions with developers from @umn.edu, all commits from them have been recently re-reviewed to ensure if they were correct or not.

Upon review, this commit was found to be incorrect for the reasons below, so it must be reverted. It will be fixed up "correctly" in a later kernel change.

The change here was incorrect. While it is nice to check if niu_pci_eeprom_read() succeeded or not when using the data, any error that might have happened was not propagated upwards properly, causing the kernel to assume that these reads were successful, which results in invalid data in the buffer that was to contain the successfully read data.

Cc: Kangjie Lu kjlu@umn.edu Cc: Shannon Nelson shannon.lee.nelson@gmail.com Cc: David S. Miller davem@davemloft.net Fixes: 26fd962bde0b ("niu: fix missing checks of niu_pci_eeprom_read") Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-23-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/sun/niu.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/drivers/net/ethernet/sun/niu.c +++ b/drivers/net/ethernet/sun/niu.c @@ -8097,8 +8097,6 @@ static int niu_pci_vpd_scan_props(struct start += 3;

prop_len = niu_pci_eeprom_read(np, start + 4); - if (prop_len < 0) - return prop_len; err = niu_pci_vpd_get_propname(np, start + 5, namebuf, 64); if (err < 0) return err; @@ -8143,12 +8141,8 @@ static int niu_pci_vpd_scan_props(struct netif_printk(np, probe, KERN_DEBUG, np->dev, "VPD_SCAN: Reading in property [%s] len[%d]\n", namebuf, prop_len); - for (i = 0; i < prop_len; i++) { - err = niu_pci_eeprom_read(np, off + i); - if (err >= 0) - *prop_buf = err; - ++prop_buf; - } + for (i = 0; i < prop_len; i++) + *prop_buf++ = niu_pci_eeprom_read(np, off + i); }

start += len;

From: Anirudh Rayabharam mail@anirudhrb.com

commit 0c32a96d000f260b5ebfabb4145a86ae1cd71847 upstream.

In case clk_prepare() fails, capture and propagate the error code up the stack. If regulator_enable() was called earlier, properly unwind it by calling regulator_disable().

Signed-off-by: Anirudh Rayabharam mail@anirudhrb.com Cc: David S. Miller davem@davemloft.net Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-22-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c @@ -30,7 +30,7 @@ struct sunxi_priv_data { static int sun7i_gmac_init(struct platform_device *pdev, void *priv) { struct sunxi_priv_data *gmac = priv; - int ret; + int ret = 0;

if (gmac->regulator) { ret = regulator_enable(gmac->regulator); @@ -50,10 +50,12 @@ static int sun7i_gmac_init(struct platfo gmac->clk_enabled = 1; } else { clk_set_rate(gmac->tx_clk, SUN7I_GMAC_MII_RATE); - clk_prepare(gmac->tx_clk); + ret = clk_prepare(gmac->tx_clk); + if (ret && gmac->regulator) + regulator_disable(gmac->regulator); }

- return 0; + return ret; }

static void sun7i_gmac_exit(struct platform_device *pdev, void *priv)

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 30b0e0ee9d02b97b68705c46b41444786effc40c upstream.

If alloc_workqueue() fails, properly catch this and propagate the error to the calling functions, so that the devuce initialization will properly error out.

Cc: Kalle Valo kvalo@codeaurora.org Cc: Bryan Brattlof hello@bryanbrattlof.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20210503115736.2104747-14-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/realtek/rtlwifi/base.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c +++ b/drivers/net/wireless/realtek/rtlwifi/base.c @@ -436,9 +436,14 @@ static void _rtl_init_mac80211(struct ie } }

-static void _rtl_init_deferred_work(struct ieee80211_hw *hw) +static int _rtl_init_deferred_work(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); + struct workqueue_struct *wq; + + wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name); + if (!wq) + return -ENOMEM;

/* <1> timer */ timer_setup(&rtlpriv->works.watchdog_timer, @@ -447,7 +452,8 @@ static void _rtl_init_deferred_work(stru rtl_easy_concurrent_retrytimer_callback, 0); /* <2> work queue */ rtlpriv->works.hw = hw; - rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name); + rtlpriv->works.rtl_wq = wq; + INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq, (void *)rtl_watchdog_wq_callback); INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq, @@ -460,6 +466,7 @@ static void _rtl_init_deferred_work(stru (void *)rtl_fwevt_wq_callback); INIT_DELAYED_WORK(&rtlpriv->works.c2hcmd_wq, (void *)rtl_c2hcmd_wq_callback); + return 0; }

void rtl_deinit_deferred_work(struct ieee80211_hw *hw, bool ips_wq) @@ -559,9 +566,7 @@ int rtl_init_core(struct ieee80211_hw *h rtlmac->link_state = MAC80211_NOLINK;

/* <6> init deferred work */ - _rtl_init_deferred_work(hw); - - return 0; + return _rtl_init_deferred_work(hw); } EXPORT_SYMBOL_GPL(rtl_init_core);

From: Phillip Potter phil@philpotter.co.uk

commit 6647f7a06eb030a2384ec71f0bb2e78854afabfe upstream.

Check return value of lp5xx_read and if non-zero, jump to code at end of the function, causing lp5523_stop_all_engines to be executed before returning the error value up the call chain. This fixes the original commit (248b57015f35) which was reverted due to the University of Minnesota problems.

Cc: stable stable@vger.kernel.org Acked-by: Jacek Anaszewski jacek.anaszewski@gmail.com Signed-off-by: Phillip Potter phil@philpotter.co.uk Link: https://lore.kernel.org/r/20210503115736.2104747-10-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/leds/leds-lp5523.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/leds/leds-lp5523.c +++ b/drivers/leds/leds-lp5523.c @@ -305,7 +305,9 @@ static int lp5523_init_program_engine(st

/* Let the programs run for couple of ms and check the engine status */ usleep_range(3000, 6000); - lp55xx_read(chip, LP5523_REG_STATUS, &status); + ret = lp55xx_read(chip, LP5523_REG_STATUS, &status); + if (ret) + goto out; status &= LP5523_ENG_STATUS_MASK;

if (status != LP5523_ENG_STATUS_MASK) {

From: Igor Matheus Andrade Torrente igormtorrente@gmail.com

commit dc13cac4862cc68ec74348a80b6942532b7735fa upstream.

The return of ioremap if not checked, and can lead to a NULL to be assigned to hga_vram. Potentially leading to a NULL pointer dereference.

The fix adds code to deal with this case in the error label and changes how the hgafb_probe handles the return of hga_card_detect.

Cc: Ferenc Bakonyi fero@drama.obuda.kando.hu Cc: Bartlomiej Zolnierkiewicz b.zolnierkie@samsung.com Cc: stable stable@vger.kernel.org Signed-off-by: Igor Matheus Andrade Torrente igormtorrente@gmail.com Link: https://lore.kernel.org/r/20210503115736.2104747-40-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/video/fbdev/hgafb.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/drivers/video/fbdev/hgafb.c +++ b/drivers/video/fbdev/hgafb.c @@ -285,6 +285,8 @@ static int hga_card_detect(void) hga_vram_len = 0x08000;

hga_vram = ioremap(0xb0000, hga_vram_len); + if (!hga_vram) + return -ENOMEM;

if (request_region(0x3b0, 12, "hgafb")) release_io_ports = 1; @@ -344,13 +346,18 @@ static int hga_card_detect(void) hga_type_name = "Hercules"; break; } - return 1; + return 0; error: if (release_io_ports) release_region(0x3b0, 12); if (release_io_port) release_region(0x3bf, 1); - return 0; + + iounmap(hga_vram); + + pr_err("hgafb: HGA card not detected.\n"); + + return -EINVAL; }

/** @@ -548,13 +555,11 @@ static struct fb_ops hgafb_ops = { static int hgafb_probe(struct platform_device *pdev) { struct fb_info *info; + int ret;

- if (! hga_card_detect()) { - printk(KERN_INFO "hgafb: HGA card not detected.\n"); - if (hga_vram) - iounmap(hga_vram); - return -EINVAL; - } + ret = hga_card_detect(); + if (!ret) + return ret;

printk(KERN_INFO "hgafb: %s with %ldK of memory detected.\n", hga_type_name, hga_vram_len/1024);

From: Maciej W. Rozycki macro@orcam.me.uk

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used.

For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"):

"syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data."

The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows:

if (clin) - video_font_height = clin; + vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity.

[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb85524583... [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e...

Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/vt/vt_ioctl.c | 6 ++--- drivers/video/console/vgacon.c | 44 ++++++++++++++++++++--------------------- include/linux/console_struct.h | 1 3 files changed, 26 insertions(+), 25 deletions(-)

--- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -895,17 +895,17 @@ int vt_ioctl(struct tty_struct *tty, if (vcp) { int ret; int save_scan_lines = vcp->vc_scan_lines; - int save_font_height = vcp->vc_font.height; + int save_cell_height = vcp->vc_cell_height;

if (v.v_vlin) vcp->vc_scan_lines = v.v_vlin; if (v.v_clin) - vcp->vc_font.height = v.v_clin; + vcp->vc_cell_height = v.v_clin; vcp->vc_resize_user = 1; ret = vc_resize(vcp, v.v_cols, v.v_rows); if (ret) { vcp->vc_scan_lines = save_scan_lines; - vcp->vc_font.height = save_font_height; + vcp->vc_cell_height = save_cell_height; console_unlock(); return ret; } --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -384,7 +384,7 @@ static void vgacon_init(struct vc_data * vc_resize(c, vga_video_num_columns, vga_video_num_lines);

c->vc_scan_lines = vga_scan_lines; - c->vc_font.height = vga_video_font_height; + c->vc_font.height = c->vc_cell_height = vga_video_font_height; c->vc_complement_mask = 0x7700; if (vga_512_chars) c->vc_hi_font_mask = 0x0800; @@ -517,32 +517,32 @@ static void vgacon_cursor(struct vc_data switch (c->vc_cursor_type & 0x0f) { case CUR_UNDERLINE: vgacon_set_cursor_size(c->vc_x, - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height - + (c->vc_cell_height < 10 ? 2 : 3), - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_TWO_THIRDS: vgacon_set_cursor_size(c->vc_x, - c->vc_font.height / 3, - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height / 3, + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_LOWER_THIRD: vgacon_set_cursor_size(c->vc_x, - (c->vc_font.height * 2) / 3, - c->vc_font.height - - (c->vc_font.height < + (c->vc_cell_height * 2) / 3, + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_LOWER_HALF: vgacon_set_cursor_size(c->vc_x, - c->vc_font.height / 2, - c->vc_font.height - - (c->vc_font.height < + c->vc_cell_height / 2, + c->vc_cell_height - + (c->vc_cell_height < 10 ? 1 : 2)); break; case CUR_NONE: @@ -553,7 +553,7 @@ static void vgacon_cursor(struct vc_data break; default: vgacon_set_cursor_size(c->vc_x, 1, - c->vc_font.height); + c->vc_cell_height); break; } break; @@ -564,13 +564,13 @@ static int vgacon_doresize(struct vc_dat unsigned int width, unsigned int height) { unsigned long flags; - unsigned int scanlines = height * c->vc_font.height; + unsigned int scanlines = height * c->vc_cell_height; u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan;

raw_spin_lock_irqsave(&vga_lock, flags);

vgacon_xres = width * VGA_FONTWIDTH; - vgacon_yres = height * c->vc_font.height; + vgacon_yres = height * c->vc_cell_height; if (vga_video_type >= VIDEO_TYPE_VGAC) { outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); max_scan = inb_p(vga_video_port_val); @@ -625,9 +625,9 @@ static int vgacon_doresize(struct vc_dat static int vgacon_switch(struct vc_data *c) { int x = c->vc_cols * VGA_FONTWIDTH; - int y = c->vc_rows * c->vc_font.height; + int y = c->vc_rows * c->vc_cell_height; int rows = screen_info.orig_video_lines * vga_default_font_height/ - c->vc_font.height; + c->vc_cell_height; /* * We need to save screen size here as it's the only way * we can spot the screen has been resized and we need to @@ -1058,7 +1058,7 @@ static int vgacon_adjust_height(struct v cursor_size_lastto = 0; c->vc_sw->con_cursor(c, CM_DRAW); } - c->vc_font.height = fontheight; + c->vc_font.height = c->vc_cell_height = fontheight; vc_resize(c, 0, rows); /* Adjust console size */ } } @@ -1113,12 +1113,12 @@ static int vgacon_resize(struct vc_data */ screen_info.orig_video_cols = width; screen_info.orig_video_lines = height; - vga_default_font_height = c->vc_font.height; + vga_default_font_height = c->vc_cell_height; return 0; } if (width % 2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ - c->vc_font.height) + c->vc_cell_height) return -EINVAL;

if (con_is_visible(c) && !vga_is_gfx) /* who knows */ --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -62,6 +62,7 @@ struct vc_data { unsigned int vc_rows; unsigned int vc_size_row; /* Bytes per row */ unsigned int vc_scan_lines; /* # of scan lines */ + unsigned int vc_cell_height; /* CRTC character cell height */ unsigned long vc_origin; /* [!] Start of real screen */ unsigned long vc_scr_end; /* [!] End of real screen */ unsigned long vc_visible_origin; /* [!] Top of visible window */

From: Christoph Hellwig hch@lst.de

commit 5e1f689913a4498e3081093670ef9d85b2c60920 upstream.

nvme_init_identify and thus nvme_mpath_init can be called multiple times and thus must not overwrite potentially initialized or in-use fields. Split out a helper for the basic initialization when the controller is initialized and make sure the init_identify path does not blindly change in-use data structures.

Fixes: 0d0b660f214d ("nvme: add ANA support") Reported-by: Martin Wilck mwilck@suse.com Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Keith Busch kbusch@kernel.org Reviewed-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/nvme/host/core.c | 3 +- drivers/nvme/host/multipath.c | 55 ++++++++++++++++++++++-------------------- drivers/nvme/host/nvme.h | 8 ++++-- 3 files changed, 37 insertions(+), 29 deletions(-)

--- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2904,7 +2904,7 @@ int nvme_init_identify(struct nvme_ctrl ctrl->hmmaxd = le16_to_cpu(id->hmmaxd); }

- ret = nvme_mpath_init(ctrl, id); + ret = nvme_mpath_init_identify(ctrl, id); kfree(id);

if (ret < 0) @@ -4145,6 +4145,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctr min(default_ps_max_latency_us, (unsigned long)S32_MAX));

nvme_fault_inject_init(&ctrl->fault_inject, dev_name(ctrl->device)); + nvme_mpath_init_ctrl(ctrl);

return 0; out_free_name: --- a/drivers/nvme/host/multipath.c +++ b/drivers/nvme/host/multipath.c @@ -718,9 +718,18 @@ void nvme_mpath_remove_disk(struct nvme_ put_disk(head->disk); }

-int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) +void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl) { - int error; + mutex_init(&ctrl->ana_lock); + timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0); + INIT_WORK(&ctrl->ana_work, nvme_ana_work); +} + +int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) +{ + size_t max_transfer_size = ctrl->max_hw_sectors << SECTOR_SHIFT; + size_t ana_log_size; + int error = 0;

/* check if multipath is enabled and we have the capability */ if (!multipath || !ctrl->subsys || !(ctrl->subsys->cmic & (1 << 3))) @@ -731,37 +740,31 @@ int nvme_mpath_init(struct nvme_ctrl *ct ctrl->nanagrpid = le32_to_cpu(id->nanagrpid); ctrl->anagrpmax = le32_to_cpu(id->anagrpmax);

- mutex_init(&ctrl->ana_lock); - timer_setup(&ctrl->anatt_timer, nvme_anatt_timeout, 0); - ctrl->ana_log_size = sizeof(struct nvme_ana_rsp_hdr) + - ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc); - ctrl->ana_log_size += ctrl->max_namespaces * sizeof(__le32); - - if (ctrl->ana_log_size > ctrl->max_hw_sectors << SECTOR_SHIFT) { + ana_log_size = sizeof(struct nvme_ana_rsp_hdr) + + ctrl->nanagrpid * sizeof(struct nvme_ana_group_desc) + + ctrl->max_namespaces * sizeof(__le32); + if (ana_log_size > max_transfer_size) { dev_err(ctrl->device, - "ANA log page size (%zd) larger than MDTS (%d).\n", - ctrl->ana_log_size, - ctrl->max_hw_sectors << SECTOR_SHIFT); + "ANA log page size (%zd) larger than MDTS (%zd).\n", + ana_log_size, max_transfer_size); dev_err(ctrl->device, "disabling ANA support.\n"); - return 0; + goto out_uninit; } - - INIT_WORK(&ctrl->ana_work, nvme_ana_work); - kfree(ctrl->ana_log_buf); - ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL); - if (!ctrl->ana_log_buf) { - error = -ENOMEM; - goto out; + if (ana_log_size > ctrl->ana_log_size) { + nvme_mpath_stop(ctrl); + kfree(ctrl->ana_log_buf); + ctrl->ana_log_buf = kmalloc(ctrl->ana_log_size, GFP_KERNEL); + if (!ctrl->ana_log_buf) + return -ENOMEM; } - + ctrl->ana_log_size = ana_log_size; error = nvme_read_ana_log(ctrl); if (error) - goto out_free_ana_log_buf; + goto out_uninit; return 0; -out_free_ana_log_buf: - kfree(ctrl->ana_log_buf); - ctrl->ana_log_buf = NULL; -out: + +out_uninit: + nvme_mpath_uninit(ctrl); return error; }

--- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -549,7 +549,8 @@ void nvme_kick_requeue_lists(struct nvme int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl,struct nvme_ns_head *head); void nvme_mpath_add_disk(struct nvme_ns *ns, struct nvme_id_ns *id); void nvme_mpath_remove_disk(struct nvme_ns_head *head); -int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id); +int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id); +void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl); void nvme_mpath_uninit(struct nvme_ctrl *ctrl); void nvme_mpath_stop(struct nvme_ctrl *ctrl); bool nvme_mpath_clear_current_path(struct nvme_ns *ns); @@ -636,7 +637,10 @@ static inline void nvme_trace_bio_comple blk_status_t status) { } -static inline int nvme_mpath_init(struct nvme_ctrl *ctrl, +static inline void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl) +{ +} +static inline int nvme_mpath_init_identify(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) { if (ctrl->subsys->cmic & (1 << 3))

From: Luiz Augusto von Dentz luiz.von.dentz@intel.com

commit b86b0b150fed840c376145383ef5105116c81b0c upstream.

L2CAP_OPTIONS shall only be used with BR/EDR modes.

Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Zubin Mithra zsm@chromium.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/bluetooth/l2cap_sock.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)

--- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -426,6 +426,20 @@ static int l2cap_sock_getsockopt_old(str break; }

+ /* Only BR/EDR modes are supported here */ + switch (chan->mode) { + case L2CAP_MODE_BASIC: + case L2CAP_MODE_ERTM: + case L2CAP_MODE_STREAMING: + break; + default: + err = -EINVAL; + break; + } + + if (err < 0) + break; + memset(&opts, 0, sizeof(opts)); opts.imtu = chan->imtu; opts.omtu = chan->omtu; @@ -685,10 +699,8 @@ static int l2cap_sock_setsockopt_old(str break; }

- chan->mode = opts.mode; - switch (chan->mode) { - case L2CAP_MODE_LE_FLOWCTL: - break; + /* Only BR/EDR modes are supported here */ + switch (opts.mode) { case L2CAP_MODE_BASIC: clear_bit(CONF_STATE2_DEVICE, &chan->conf_state); break; @@ -702,6 +714,10 @@ static int l2cap_sock_setsockopt_old(str break; }

+ if (err < 0) + break; + + chan->mode = opts.mode; chan->imtu = opts.imtu; chan->omtu = opts.omtu; chan->fcs = opts.fcs;