From: Macpaul Lin macpaul.lin@mediatek.com

commit 456244aeecd54249096362a173dfe06b82a5cafa upstream.

Issue description: When an OTG port has been switched to device role and then switch back to host role again, the USB 3.0 Host (XHCI) will not be able to detect "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed) devices until system reboot.

Root cause and Solution: There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in toggle_opstate(). At the end of role switch procedure, toggle_opstate() will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN will be skipped hence caused the port cannot detect connected USB 2.0 (Highspeed and Fullspeed) devices. Simply remove the condition check to solve this issue.

Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Cc: stable@vger.kernel.org Tested-by: Fabien Parent fparent@baylibre.com Reviewed-by: Chunfeng Yun chunfeng.yun@mediatek.com Signed-off-by: Macpaul Lin macpaul.lin@mediatek.com Signed-off-by: Tainping Fang tianping.fang@mediatek.com Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/mtu3/mtu3_dr.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c index a6b04831b20b..9b8aded3d95e 100644 --- a/drivers/usb/mtu3/mtu3_dr.c +++ b/drivers/usb/mtu3/mtu3_dr.c @@ -21,10 +21,8 @@ static inline struct ssusb_mtk *otg_sx_to_ssusb(struct otg_switch_mtk *otg_sx)

static void toggle_opstate(struct ssusb_mtk *ssusb) { - if (!ssusb->otg_switch.is_u3_drd) { - mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION); - mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN); - } + mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION); + mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN); }

/* only port0 supports dual-role mode */

From: Oliver Neukum oneukum@suse.com

commit 2a7ccf6bb6f147f64c025ad68f4255d8e1e0ce6d upstream.

This device is reported to stall when enummerated.

Cc: stable stable@vger.kernel.org Signed-off-by: Oliver Neukum oneukum@suse.com Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -404,6 +404,9 @@ static const struct usb_device_id usb_qu { USB_DEVICE(0x0b05, 0x17e0), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP },

+ /* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/ + { USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Realtek hub in Dell WD19 (Type-C) */ { USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },

From: Kees Cook keescook@chromium.org

commit e23e50e7acc8d8f16498e9c129db33e6a00e80eb upstream.

The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n due to "-mabi=apcs-gnu", even though it has a single u8:

whiteheat_private { __u8 mcr; /* 0 1 */

/* size: 4, cachelines: 1, members: 1 */ /* padding: 3 */ /* last cacheline: 4 bytes */ };

The result is technically harmless, as both the source and the destinations are currently the same allocation size (4 bytes) and don't use their padding, but if anything were to ever be added after the "mcr" member in "struct whiteheat_private", it would be overwritten. The structs both have a single u8 "mcr" member, but are 4 bytes in padded size. The memcpy() destination was explicitly targeting the u8 member (size 1) with the length of the whole structure (size 4), triggering the memcpy buffer overflow warning:

In file included from include/linux/string.h:253, from include/linux/bitmap.h:11, from include/linux/cpumask.h:12, from include/linux/smp.h:13, from include/linux/lockdep.h:14, from include/linux/spinlock.h:62, from include/linux/mmzone.h:8, from include/linux/gfp.h:6, from include/linux/slab.h:15, from drivers/usb/serial/whiteheat.c:17: In function 'fortify_memcpy_chk', inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4: include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 328 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Instead, just assign the one byte directly.

Reported-by: kernel test robot lkp@intel.com Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com Cc: stable@vger.kernel.org Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/whiteheat.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -584,9 +584,8 @@ static int firm_send_command(struct usb_ switch (command) { case WHITEHEAT_GET_DTR_RTS: info = usb_get_serial_port_data(port); - memcpy(&info->mcr, command_info->result_buffer, - sizeof(struct whiteheat_dr_info)); - break; + info->mcr = command_info->result_buffer[0]; + break; } } exit:

From: Slark Xiao slark_xiao@163.com

commit b4a64ed6e7b857317070fcb9d87ff5d4a73be3e8 upstream.

Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is 0x00F1, and MV32-WB PID is 0x00F2.

Test evidence as below: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f1 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F1 USB Mobile Broadband S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f2 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F2 USB Mobile Broadband S: SerialNumber=cdd06a78 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag GNSS port don't use serial driver.

Signed-off-by: Slark Xiao slark_xiao@163.com Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -432,6 +432,8 @@ static void option_instat_callback(struc #define CINTERION_PRODUCT_CLS8 0x00b0 #define CINTERION_PRODUCT_MV31_MBIM 0x00b3 #define CINTERION_PRODUCT_MV31_RMNET 0x00b7 +#define CINTERION_PRODUCT_MV32_WA 0x00f1 +#define CINTERION_PRODUCT_MV32_WB 0x00f2

/* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -1969,6 +1971,10 @@ static const struct usb_device_id option .driver_info = RSVD(3)}, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff), .driver_info = RSVD(0)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff), + .driver_info = RSVD(3)}, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff), + .driver_info = RSVD(3)}, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),

From: zhangqilong zhangqilong3@huawei.com

commit 8771039482d965bdc8cefd972bcabac2b76944a8 upstream.

pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced.

Fixes: 41a7426d25fa ("usb: xhci: tegra: Unlink power domain devices") Cc: stable stable@vger.kernel.org Signed-off-by: Zhang Qilong zhangqilong3@huawei.com Link: https://lore.kernel.org/r/20220319023822.145641-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-tegra.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -1034,13 +1034,13 @@ static int tegra_xusb_unpowergate_partit int rc;

if (tegra->use_genpd) { - rc = pm_runtime_get_sync(tegra->genpd_dev_ss); + rc = pm_runtime_resume_and_get(tegra->genpd_dev_ss); if (rc < 0) { dev_err(dev, "failed to enable XUSB SS partition\n"); return rc; }

- rc = pm_runtime_get_sync(tegra->genpd_dev_host); + rc = pm_runtime_resume_and_get(tegra->genpd_dev_host); if (rc < 0) { dev_err(dev, "failed to enable XUSB Host partition\n"); pm_runtime_put_sync(tegra->genpd_dev_ss);

From: Henry Lin henryl@nvidia.com

commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream.

While rebooting, XHCI controller and its bus device will be shut down in order by .shutdown callback. Stopping roothubs polling in xhci_shutdown() can prevent XHCI driver from accessing port status after its bus device shutdown.

Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs polling, XHCI driver may access PCIe BAR register for port status after parent PCIe root port driver is shutdown and cause PCIe bus error.

[check shared hcd exist before stopping its roothub polling -Mathias]

Cc: stable@vger.kernel.org Signed-off-by: Henry Lin henryl@nvidia.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci.c | 11 +++++++++++ 1 file changed, 11 insertions(+)

--- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -778,6 +778,17 @@ void xhci_shutdown(struct usb_hcd *hcd) if (xhci->quirks & XHCI_SPURIOUS_REBOOT) usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));

+ /* Don't poll the roothubs after shutdown. */ + xhci_dbg(xhci, "%s: stopping usb%d port polling.\n", + __func__, hcd->self.busnum); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + + if (xhci->shared_hcd) { + clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); + del_timer_sync(&xhci->shared_hcd->rh_timer); + } + spin_lock_irq(&xhci->lock); xhci_halt(xhci); /* Workaround for spurious wakeups at shutdown with HSW */

From: Zizhuang Deng sunsetdzz@gmail.com

commit b55b38f7cc12da3b9ef36e7a3b7f8f96737df4d5 upstream.

The third call to `fwnode_property_read_u32` did not record the return value, resulting in `channel_offstate` possibly being assigned the wrong value.

Fixes: 56ca9db862bf ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Signed-off-by: Zizhuang Deng sunsetdzz@gmail.com Link: https://lore.kernel.org/r/20220310125450.4164164-1-sunsetdzz@gmail.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/dac/ad5592r-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/dac/ad5592r-base.c +++ b/drivers/iio/dac/ad5592r-base.c @@ -523,7 +523,7 @@ static int ad5592r_alloc_channels(struct if (!ret) st->channel_modes[reg] = tmp;

- fwnode_property_read_u32(child, "adi,off-state", &tmp); + ret = fwnode_property_read_u32(child, "adi,off-state", &tmp); if (!ret) st->channel_offstate[reg] = tmp; }

From: Michael Hennerich michael.hennerich@analog.com

commit 89a01cd688d3c0ac983ef0b0e5f40018ab768317 upstream.

read_raw should return the un-scaled value.

Fixes: 5e06bdfb46e8b ("staging:iio:dac:ad5446: Return cached value for 'raw' attribute") Signed-off-by: Michael Hennerich michael.hennerich@analog.com Reviewed-by: Nuno Sá nuno.sa@analog.com Link: https://lore.kernel.org/r/20220406105620.1171340-1-michael.hennerich@analog.... Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/dac/ad5446.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/dac/ad5446.c +++ b/drivers/iio/dac/ad5446.c @@ -178,7 +178,7 @@ static int ad5446_read_raw(struct iio_de

switch (m) { case IIO_CHAN_INFO_RAW: - *val = st->cached_val; + *val = st->cached_val >> chan->scan_type.shift; return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: *val = st->vref_mv;

From: Fawzi Khaber fawzi.khaber@tdk.com

commit b5d6ba09b10d2ccb865ed9bc45941db0a41c6756 upstream.

This register write to REG_INTF_CONFIG6 enables a spike filter that is impacting the line and can prevent the I2C ACK to be seen by the controller. So we don't test the return value.

Fixes: 7297ef1e261672b8 ("iio: imu: inv_icm42600: add I2C driver") Signed-off-by: Fawzi Khaber fawzi.khaber@tdk.com Signed-off-by: Jean-Baptiste Maneyrol jean-baptiste.maneyrol@tdk.com Link: https://lore.kernel.org/r/20220411111533.5826-1-jmaneyrol@invensense.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)

--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c +++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c @@ -18,12 +18,15 @@ static int inv_icm42600_i2c_bus_setup(st unsigned int mask, val; int ret;

- /* setup interface registers */ - ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6, - INV_ICM42600_INTF_CONFIG6_MASK, - INV_ICM42600_INTF_CONFIG6_I3C_EN); - if (ret) - return ret; + /* + * setup interface registers + * This register write to REG_INTF_CONFIG6 enables a spike filter that + * is impacting the line and can prevent the I2C ACK to be seen by the + * controller. So we don't test the return value. + */ + regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG6, + INV_ICM42600_INTF_CONFIG6_MASK, + INV_ICM42600_INTF_CONFIG6_I3C_EN);

ret = regmap_update_bits(st->map, INV_ICM42600_REG_INTF_CONFIG4, INV_ICM42600_INTF_CONFIG4_I3C_BUS_ONLY, 0);

From: Tasos Sahanidis tasos@tasossah.com

commit 0543e4e8852ef5ff1809ae62f1ea963e2ab23b66 upstream.

Since commit ae8709b296d8 ("USB: core: Make do_proc_control() and do_proc_bulk() killable") if a device has the USB_QUIRK_DELAY_CTRL_MSG quirk set, it will temporarily block all other URBs (e.g. interrupts) while sleeping due to a control.

This results in noticeable delays when, for example, a userspace usbfs application is sending URB interrupts at a high rate to a keyboard and simultaneously updates the lock indicators using controls. Interrupts with direction set to IN are also affected by this, meaning that delivery of HID reports (containing scancodes) to the usbfs application is delayed as well.

This patch fixes the regression by calling msleep() while the device mutex is unlocked, as was the case originally with usb_control_msg().

Fixes: ae8709b296d8 ("USB: core: Make do_proc_control() and do_proc_bulk() killable") Cc: stable stable@kernel.org Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Tasos Sahanidis tasos@tasossah.com Link: https://lore.kernel.org/r/3e299e2a-13b9-ddff-7fee-6845e868bc06@tasossah.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/devio.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1197,12 +1197,16 @@ static int do_proc_control(struct usb_de

usb_unlock_device(dev); i = usbfs_start_wait_urb(urb, tmo, &actlen); + + /* Linger a bit, prior to the next control message. */ + if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) + msleep(200); usb_lock_device(dev); snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, tbuf, actlen); if (!i && actlen) { if (copy_to_user(ctrl->data, tbuf, actlen)) { ret = -EFAULT; - goto recv_fault; + goto done; } } } else { @@ -1219,6 +1223,10 @@ static int do_proc_control(struct usb_de

usb_unlock_device(dev); i = usbfs_start_wait_urb(urb, tmo, &actlen); + + /* Linger a bit, prior to the next control message. */ + if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) + msleep(200); usb_lock_device(dev); snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, NULL, 0); } @@ -1230,10 +1238,6 @@ static int do_proc_control(struct usb_de } ret = (i < 0 ? i : actlen);

- recv_fault: - /* Linger a bit, prior to the next control message. */ - if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) - msleep(200); done: kfree(dr); usb_free_urb(urb);

From: Heikki Krogerus heikki.krogerus@linux.intel.com

commit eb5d7ff3cf0d55093c619b5ad107cd5c05ce8134 upstream.

All attempts to swap the roles timed out because the completion was done without releasing the port lock. Fixing that by releasing the lock before starting to wait for the completion.

Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail... Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: stable@vger.kernel.org Reported-and-tested-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: Heikki Krogerus heikki.krogerus@linux.intel.com Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/typec/ucsi/ucsi.c | 20 +++++++++++++------- 1 file changed, 13 insertions(+), 7 deletions(-)

--- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -958,14 +958,18 @@ static int ucsi_dr_swap(struct typec_por if (ret < 0) goto out_unlock;

+ mutex_unlock(&con->lock); + if (!wait_for_completion_timeout(&con->complete, - msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) - ret = -ETIMEDOUT; + msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) + return -ETIMEDOUT; + + return 0;

out_unlock: mutex_unlock(&con->lock);

- return ret < 0 ? ret : 0; + return ret; }

static int ucsi_pr_swap(struct typec_port *port, enum typec_role role) @@ -996,11 +1000,13 @@ static int ucsi_pr_swap(struct typec_por if (ret < 0) goto out_unlock;

+ mutex_unlock(&con->lock); + if (!wait_for_completion_timeout(&con->complete, - msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) { - ret = -ETIMEDOUT; - goto out_unlock; - } + msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) + return -ETIMEDOUT; + + mutex_lock(&con->lock);

/* Something has gone wrong while swapping the role */ if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) !=

From: Vijayavardhan Vennapusa vvreddy@codeaurora.org

commit bf95c4d4630c7a2c16e7b424fdea5177d9ce0864 upstream.

If any function like UVC is deactivating gadget as part of composition switch which results in not calling pullup enablement, it is not getting enabled after switch to new composition due to this deactivation flag not cleared. This results in USB enumeration not happening after switch to new USB composition. Hence clear deactivation flag inside gadget structure in configfs_composite_unbind() before switch to new USB composition.

Signed-off-by: Vijayavardhan Vennapusa vvreddy@codeaurora.org Signed-off-by: Dan Vacura w36195@motorola.com Cc: stable stable@kernel.org Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/configfs.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1434,6 +1434,8 @@ static void configfs_composite_unbind(st usb_ep_autoconfig_reset(cdev->gadget); spin_lock_irqsave(&gi->spinlock, flags); cdev->gadget = NULL; + cdev->deactivations = 0; + gadget->deactivated = false; set_gadget_data(gadget, NULL); spin_unlock_irqrestore(&gi->spinlock, flags); }

From: Thinh Nguyen Thinh.Nguyen@synopsys.com

commit f28ad9069363dec7deb88032b70612755eed9ee6 upstream.

The current driver logic checks against 0 to determine whether the periodic tx/rx threshold settings are set, but we may get bogus values from uninitialized variables if no device property is set. Properly default these variables to 0.

Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.164972713... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1295,10 +1295,10 @@ static void dwc3_get_properties(struct d u8 lpm_nyet_threshold; u8 tx_de_emphasis; u8 hird_threshold; - u8 rx_thr_num_pkt_prd; - u8 rx_max_burst_prd; - u8 tx_thr_num_pkt_prd; - u8 tx_max_burst_prd; + u8 rx_thr_num_pkt_prd = 0; + u8 rx_max_burst_prd = 0; + u8 tx_thr_num_pkt_prd = 0; + u8 tx_max_burst_prd = 0; u8 tx_fifo_resize_max_num; const char *usb_psy_name; int ret;

From: Thinh Nguyen Thinh.Nguyen@synopsys.com

commit c7428dbddcf4ea1919e1c8e15f715b94ca359268 upstream.

If the user sets the usb_request's no_interrupt, then there will be no completion event for the request. Currently the driver incorrectly uses the event status of a different request to report the status for a request with no_interrupt. The dwc3 driver needs to check the TRB status associated with the request when reporting its status.

Note: this is only applicable to missed_isoc TRB completion status, but the other status are also listed for completeness/documentation.

Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.165067365... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/gadget.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3229,6 +3229,7 @@ static int dwc3_gadget_ep_cleanup_comple const struct dwc3_event_depevt *event, struct dwc3_request *req, int status) { + int request_status; int ret;

if (req->request.num_mapped_sgs) @@ -3249,7 +3250,35 @@ static int dwc3_gadget_ep_cleanup_comple req->needs_extra_trb = false; }

- dwc3_gadget_giveback(dep, req, status); + /* + * The event status only reflects the status of the TRB with IOC set. + * For the requests that don't set interrupt on completion, the driver + * needs to check and return the status of the completed TRBs associated + * with the request. Use the status of the last TRB of the request. + */ + if (req->request.no_interrupt) { + struct dwc3_trb *trb; + + trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue); + switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) { + case DWC3_TRBSTS_MISSED_ISOC: + /* Isoc endpoint only */ + request_status = -EXDEV; + break; + case DWC3_TRB_STS_XFER_IN_PROG: + /* Applicable when End Transfer with ForceRM=0 */ + case DWC3_TRBSTS_SETUP_PENDING: + /* Control endpoint only */ + case DWC3_TRBSTS_OK: + default: + request_status = 0; + break; + } + } else { + request_status = status; + } + + dwc3_gadget_giveback(dep, req, request_status);

out: return ret;

From: Pawel Laszczak pawell@cadence.com

commit b3fa25de31fb7e9afebe9599b8ff32eda13d7c94 upstream.

Path fixes bug which occurs during resetting endpoint in __cdns3_gadget_ep_clear_halt function. During resetting endpoint controller will change HW/DMA owned TRB. It set Abort flag in trb->control and will change trb->length field. If driver want to use the aborted trb it must update the changed field in TRB.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: stable@vger.kernel.org Acked-by: Peter Chen peter.chen@kernel.org Signed-off-by: Pawel Laszczak pawell@cadence.com Link: https://lore.kernel.org/r/20220329084605.4022-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/cdns3/cdns3-gadget.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -2684,6 +2684,7 @@ int __cdns3_gadget_ep_clear_halt(struct struct usb_request *request; struct cdns3_request *priv_req; struct cdns3_trb *trb = NULL; + struct cdns3_trb trb_tmp; int ret; int val;

@@ -2693,8 +2694,10 @@ int __cdns3_gadget_ep_clear_halt(struct if (request) { priv_req = to_cdns3_request(request); trb = priv_req->trb; - if (trb) + if (trb) { + trb_tmp = *trb; trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE); + } }

writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd); @@ -2709,7 +2712,7 @@ int __cdns3_gadget_ep_clear_halt(struct

if (request) { if (trb) - trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE); + *trb = trb_tmp;

cdns3_rearm_transfer(priv_ep, 1); }

From: Minchan Kim minchan@kernel.org

commit ad8d869343ae4a07a2038a4ca923f699308c8323 upstream.

kernfs_remove supported NULL kernfs_node param to bail out but revent per-fs lock change introduced regression that dereferencing the param without NULL check so kernel goes crash.

This patch checks the NULL kernfs_node in kernfs_remove and if so, just return.

Quote from bug report by Jirka

``` The bug is triggered by running NAS Parallel benchmark suite on SuperMicro servers with 2x Xeon(R) Gold 6126 CPU. Here is the error log:

[ 247.035564] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 247.036009] #PF: supervisor read access in kernel mode [ 247.036009] #PF: error_code(0x0000) - not-present page [ 247.036009] PGD 0 P4D 0 [ 247.036009] Oops: 0000 [#1] PREEMPT SMP PTI [ 247.058060] CPU: 1 PID: 6546 Comm: umount Not tainted 5.16.0393c3714081a53795bbff0e985d24146def6f57f+ #16 [ 247.058060] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 2.0b 03/07/2018 [ 247.058060] RIP: 0010:kernfs_remove+0x8/0x50 [ 247.058060] Code: 4c 89 e0 5b 5d 41 5c 41 5d 41 5e c3 49 c7 c4 f4 ff ff ff eb b2 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 0f 1f 44 00 00 41 54 55 <48> 8b 47 08 48 89 fd 48 85 c0 48 0f 44 c7 4c 8b 60 50 49 83 c4 60 [ 247.058060] RSP: 0018:ffffbbfa48a27e48 EFLAGS: 00010246 [ 247.058060] RAX: 0000000000000001 RBX: ffffffff89e31f98 RCX: 0000000080200018 [ 247.058060] RDX: 0000000080200019 RSI: fffff6760786c900 RDI: 0000000000000000 [ 247.058060] RBP: ffffffff89e31f98 R08: ffff926b61b24d00 R09: 0000000080200018 [ 247.122048] R10: ffff926b61b24d00 R11: ffff926a8040c000 R12: ffff927bd09a2000 [ 247.122048] R13: ffffffff89e31fa0 R14: dead000000000122 R15: dead000000000100 [ 247.122048] FS: 00007f01be0a8c40(0000) GS:ffff926fa8e40000(0000) knlGS:0000000000000000 [ 247.122048] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 247.122048] CR2: 0000000000000008 CR3: 00000001145c6003 CR4: 00000000007706e0 [ 247.122048] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 247.122048] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 247.122048] PKRU: 55555554 [ 247.122048] Call Trace: [ 247.122048] <TASK> [ 247.122048] rdt_kill_sb+0x29d/0x350 [ 247.122048] deactivate_locked_super+0x36/0xa0 [ 247.122048] cleanup_mnt+0x131/0x190 [ 247.122048] task_work_run+0x5c/0x90 [ 247.122048] exit_to_user_mode_prepare+0x229/0x230 [ 247.122048] syscall_exit_to_user_mode+0x18/0x40 [ 247.122048] do_syscall_64+0x48/0x90 [ 247.122048] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 247.122048] RIP: 0033:0x7f01be2d735b ```

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215696 Link: https://lore.kernel.org/lkml/CAE4VaGDZr_4wzRn2___eDYRtmdPaGGJdzu_LCSkJYuY9BE... Fixes: 393c3714081a (kernfs: switch global kernfs_rwsem lock to per-fs lock) Cc: stable@vger.kernel.org Reported-by: Jirka Hladky jhladky@redhat.com Tested-by: Jirka Hladky jhladky@redhat.com Acked-by: Tejun Heo tj@kernel.org Signed-off-by: Minchan Kim minchan@kernel.org Link: https://lore.kernel.org/r/20220427172152.3505364-1-minchan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/kernfs/dir.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/fs/kernfs/dir.c +++ b/fs/kernfs/dir.c @@ -1397,7 +1397,12 @@ static void __kernfs_remove(struct kernf */ void kernfs_remove(struct kernfs_node *kn) { - struct kernfs_root *root = kernfs_root(kn); + struct kernfs_root *root; + + if (!kn) + return; + + root = kernfs_root(kn);

down_write(&root->kernfs_rwsem); __kernfs_remove(kn);

From: Alessandro Astone ales.astone@gmail.com

commit 2d1746e3fda0c3612143d7c06f8e1d1830c13e23 upstream.

When handling BINDER_TYPE_FDA object we are pushing a parent fixup with a certain skip_size but no scatter-gather copy object, since the copy is handled standalone. If BINDER_TYPE_FDA is the last children the scatter-gather copy loop will never stop to skip it, thus we are left with an item in the parent fixup list. This will trigger the BUG_ON().

This is reproducible in android when playing a video. We receive a transaction that looks like this: obj[0] BINDER_TYPE_PTR, parent obj[1] BINDER_TYPE_PTR, child obj[2] BINDER_TYPE_PTR, child obj[3] BINDER_TYPE_FDA, child

Fixes: 09184ae9b575 ("binder: defer copies of pre-patched txn data") Acked-by: Todd Kjos tkjos@google.com Cc: stable stable@kernel.org Signed-off-by: Alessandro Astone ales.astone@gmail.com Link: https://lore.kernel.org/r/20220415120015.52684-2-ales.astone@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/android/binder.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2295,6 +2295,7 @@ static int binder_do_deferred_txn_copies { int ret = 0; struct binder_sg_copy *sgc, *tmpsgc; + struct binder_ptr_fixup *tmppf; struct binder_ptr_fixup *pf = list_first_entry_or_null(pf_head, struct binder_ptr_fixup, node); @@ -2349,7 +2350,11 @@ static int binder_do_deferred_txn_copies list_del(&sgc->node); kfree(sgc); } - BUG_ON(!list_empty(pf_head)); + list_for_each_entry_safe(pf, tmppf, pf_head, node) { + BUG_ON(pf->skip_size == 0); + list_del(&pf->node); + kfree(pf); + } BUG_ON(!list_empty(sgc_head));

return ret > 0 ? -EINVAL : ret;

From: Lino Sanfilippo LinoSanfilippo@gmx.de

commit 0e4deb56b0c625efdb70c94f150429e2f2a16fa1 upstream.

The current timeout for draining the tx fifo in RS485 mode is calculated by multiplying the time it takes to transmit one character (with the given baud rate) with the maximal number of characters in the tx queue.

This timeout is too short for two reasons: First when calculating the time to transmit one character integer division is used which may round down the result in case of a remainder of the division.

Fix this by rounding up the division result.

Second the hardware may need additional time (e.g for first putting the characters from the fifo into the shift register) before the characters are actually put onto the wire.

To be on the safe side double the current maximum number of iterations that are used to wait for the queue draining.

Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Cc: stable@vger.kernel.org Signed-off-by: Lino Sanfilippo LinoSanfilippo@gmx.de Link: https://lore.kernel.org/r/20220408233503.7251-1-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/amba-pl011.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1255,13 +1255,18 @@ static inline bool pl011_dma_rx_running(

static void pl011_rs485_tx_stop(struct uart_amba_port *uap) { + /* + * To be on the safe side only time out after twice as many iterations + * as fifo size. + */ + const int MAX_TX_DRAIN_ITERS = uap->port.fifosize * 2; struct uart_port *port = &uap->port; int i = 0; u32 cr;

/* Wait until hardware tx queue is empty */ while (!pl011_tx_empty(port)) { - if (i == port->fifosize) { + if (i > MAX_TX_DRAIN_ITERS) { dev_warn(port->dev, "timeout while draining hardware tx queue\n"); break; @@ -2052,7 +2057,7 @@ pl011_set_termios(struct uart_port *port * with the given baud rate. We use this as the poll interval when we * wait for the tx queue to empty. */ - uap->rs485_tx_drain_interval = (bits * 1000 * 1000) / baud; + uap->rs485_tx_drain_interval = DIV_ROUND_UP(bits * 1000 * 1000, baud);

pl011_setup_status_masks(port, termios);

From: Maciej W. Rozycki macro@orcam.me.uk

commit 637674fa40059cddcc3ad2212728965072f62ea3 upstream.

The EndRun PTP/1588 dual serial port device is based on the Oxford Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock. The clock rate is divided by the oversampling rate of 16 as it is supplied to the baud rate generator, yielding the baud base of 3906250.

Replace the incorrect baud base of 4000000 with the right value of 3906250 then, complementing commit 6cbe45d8ac93 ("serial: 8250: Correct the clock for OxSemi PCIe devices").

Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Cc: stable stable@kernel.org Fixes: 1bc8cde46a159 ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.") Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_pci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -2667,7 +2667,7 @@ enum pci_board_num_t { pbn_panacom2, pbn_panacom4, pbn_plx_romulus, - pbn_endrun_2_4000000, + pbn_endrun_2_3906250, pbn_oxsemi, pbn_oxsemi_1_3906250, pbn_oxsemi_2_3906250, @@ -3195,10 +3195,10 @@ static struct pciserial_board pci_boards * signal now many ports are available * 2 port 952 Uart support */ - [pbn_endrun_2_4000000] = { + [pbn_endrun_2_3906250] = { .flags = FL_BASE0, .num_ports = 2, - .base_baud = 4000000, + .base_baud = 3906250, .uart_offset = 0x200, .first_offset = 0x1000, }, @@ -4115,7 +4115,7 @@ static const struct pci_device_id serial */ { PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588, PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_endrun_2_4000000 }, + pbn_endrun_2_3906250 }, /* * Quatech cards. These actually have configurable clocks but for * now we just use the default.

From: Wang Qing wangqing@vivo.com

commit 1dc9f1a66e1718479e1c4f95514e1750602a3cb9 upstream.

When ACPI is not enabled, cpuid_topo->llc_id = cpu_topo->llc_id = -1, which will set llc_sibling 0xff(...), this is misleading.

Don't set llc_sibling(default 0) if we don't know the cache topology.

Reviewed-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Wang Qing wangqing@vivo.com Fixes: 37c3ec2d810f ("arm64: topology: divorce MC scheduling domain from core_siblings") Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/1649644580-54626-1-git-send-email-wangqing@vivo.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/base/arch_topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/base/arch_topology.c +++ b/drivers/base/arch_topology.c @@ -645,7 +645,7 @@ void update_siblings_masks(unsigned int for_each_online_cpu(cpu) { cpu_topo = &cpu_topology[cpu];

- if (cpuid_topo->llc_id == cpu_topo->llc_id) { + if (cpu_topo->llc_id != -1 && cpuid_topo->llc_id == cpu_topo->llc_id) { cpumask_set_cpu(cpu, &cpuid_topo->llc_sibling); cpumask_set_cpu(cpuid, &cpu_topo->llc_sibling); }

From: Xiubo Li xiubli@redhat.com

commit 7acae6183cf37c48b8da48bbbdb78820fb3913f3 upstream.

The request will be inserted into the ci->i_unsafe_dirops before assigning the req->r_session, so it's possible that we will hit NULL pointer dereference bug here.

Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/55327 Signed-off-by: Xiubo Li xiubli@redhat.com Reviewed-by: Jeff Layton jlayton@kernel.org Tested-by: Aaron Tomlin atomlin@redhat.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ceph/caps.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -2267,6 +2267,8 @@ retry: list_for_each_entry(req, &ci->i_unsafe_dirops, r_unsafe_dir_item) { s = req->r_session; + if (!s) + continue; if (unlikely(s->s_mds >= max_sessions)) { spin_unlock(&ci->i_unsafe_lock); for (i = 0; i < max_sessions; i++) { @@ -2287,6 +2289,8 @@ retry: list_for_each_entry(req, &ci->i_unsafe_iops, r_unsafe_target_item) { s = req->r_session; + if (!s) + continue; if (unlikely(s->s_mds >= max_sessions)) { spin_unlock(&ci->i_unsafe_lock); for (i = 0; i < max_sessions; i++) {

From: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org

commit c38f83bae4037023827c85e045841d0421f85034 upstream.

It is possible that the recovery work might be running while the freeze gets executed (during hibernation etc.,). Currently, we don't powerdown the stack if it is not up but if the recovery work completes after freeze, then the device will be up afterwards. This will not be a sane situation.

So let's flush the recovery worker before trying to powerdown the device.

Cc: stable@vger.kernel.org Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation") Reported-by: Bhaumik Vasav Bhatt quic_bbhatt@quicinc.com Reviewed-by: Bhaumik Vasav Bhatt quic_bbhatt@quicinc.com Link: https://lore.kernel.org/r/20220408150039.17297-1-manivannan.sadhasivam@linar... Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/bus/mhi/pci_generic.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/bus/mhi/pci_generic.c +++ b/drivers/bus/mhi/pci_generic.c @@ -1060,6 +1060,7 @@ static int __maybe_unused mhi_pci_freeze * the intermediate restore kernel reinitializes MHI device with new * context. */ + flush_work(&mhi_pdev->recovery_work); if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) { mhi_power_down(mhi_cntrl, true); mhi_unprepare_after_power_down(mhi_cntrl);

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

commit ac875df4d854ab13d9c4af682a1837a1214fecec upstream.

The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB. ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8 Exynos selects only the latter leading to possible wrong configuration on ARMv8 build:

WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y]) Selected by [y]: - ARCH_EXYNOS [=y]

Always select the GPIOLIB from the Samsung pinctrl drivers to fix the issue. This requires removing of OF_GPIO dependency (to avoid recursive dependency), so add dependency on OF for COMPILE_TEST cases.

Reported-by: Necip Fazil Yildiran fazilyildiran@gmail.com Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/mach-exynos/Kconfig | 1 - drivers/pinctrl/samsung/Kconfig | 11 ++++------- 2 files changed, 4 insertions(+), 8 deletions(-)

--- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -17,7 +17,6 @@ menuconfig ARCH_EXYNOS select EXYNOS_PMU select EXYNOS_SROM select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS - select GPIOLIB select HAVE_ARM_ARCH_TIMER if ARCH_EXYNOS5 select HAVE_ARM_SCU if SMP select PINCTRL --- a/drivers/pinctrl/samsung/Kconfig +++ b/drivers/pinctrl/samsung/Kconfig @@ -4,14 +4,13 @@ # config PINCTRL_SAMSUNG bool - depends on OF_GPIO + select GPIOLIB select PINMUX select PINCONF

config PINCTRL_EXYNOS bool "Pinctrl common driver part for Samsung Exynos SoCs" - depends on OF_GPIO - depends on ARCH_EXYNOS || ARCH_S5PV210 || COMPILE_TEST + depends on ARCH_EXYNOS || ARCH_S5PV210 || (COMPILE_TEST && OF) select PINCTRL_SAMSUNG select PINCTRL_EXYNOS_ARM if ARM && (ARCH_EXYNOS || ARCH_S5PV210) select PINCTRL_EXYNOS_ARM64 if ARM64 && ARCH_EXYNOS @@ -26,12 +25,10 @@ config PINCTRL_EXYNOS_ARM64

config PINCTRL_S3C24XX bool "Samsung S3C24XX SoC pinctrl driver" - depends on OF_GPIO - depends on ARCH_S3C24XX || COMPILE_TEST + depends on ARCH_S3C24XX || (COMPILE_TEST && OF) select PINCTRL_SAMSUNG

config PINCTRL_S3C64XX bool "Samsung S3C64XX SoC pinctrl driver" - depends on OF_GPIO - depends on ARCH_S3C64XX || COMPILE_TEST + depends on ARCH_S3C64XX || (COMPILE_TEST && OF) select PINCTRL_SAMSUNG

From: Mikulas Patocka mpatocka@redhat.com

commit e5be15767e7e284351853cbaba80cde8620341fb upstream.

The function hex2bin is used to load cryptographic keys into device mapper targets dm-crypt and dm-integrity. It should take constant time independent on the processed data, so that concurrently running unprivileged code can't infer any information about the keys via microarchitectural convert channels.

This patch changes the function hex_to_bin so that it contains no branches and no memory accesses.

Note that this shouldn't cause performance degradation because the size of the new function is the same as the size of the old function (on x86-64) - and the new function causes no branch misprediction penalties.

I compile-tested this function with gcc on aarch64 alpha arm hppa hppa64 i386 ia64 m68k mips32 mips64 powerpc powerpc64 riscv sh4 s390x sparc32 sparc64 x86_64 and with clang on aarch64 arm hexagon i386 mips32 mips64 powerpc powerpc64 s390x sparc32 sparc64 x86_64 to verify that there are no branches in the generated code.

Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/kernel.h | 2 +- lib/hexdump.c | 32 +++++++++++++++++++++++++------- 2 files changed, 26 insertions(+), 8 deletions(-)

--- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -280,7 +280,7 @@ static inline char *hex_byte_pack_upper( return buf; }

-extern int hex_to_bin(char ch); +extern int hex_to_bin(unsigned char ch); extern int __must_check hex2bin(u8 *dst, const char *src, size_t count); extern char *bin2hex(char *dst, const void *src, size_t count);

--- a/lib/hexdump.c +++ b/lib/hexdump.c @@ -22,15 +22,33 @@ EXPORT_SYMBOL(hex_asc_upper); * * hex_to_bin() converts one hex digit to its actual value or -1 in case of bad * input. + * + * This function is used to load cryptographic keys, so it is coded in such a + * way that there are no conditions or memory accesses that depend on data. + * + * Explanation of the logic: + * (ch - '9' - 1) is negative if ch <= '9' + * ('0' - 1 - ch) is negative if ch >= '0' + * we "and" these two values, so the result is negative if ch is in the range + * '0' ... '9' + * we are only interested in the sign, so we do a shift ">> 8"; note that right + * shift of a negative value is implementation-defined, so we cast the + * value to (unsigned) before the shift --- we have 0xffffff if ch is in + * the range '0' ... '9', 0 otherwise + * we "and" this value with (ch - '0' + 1) --- we have a value 1 ... 10 if ch is + * in the range '0' ... '9', 0 otherwise + * we add this value to -1 --- we have a value 0 ... 9 if ch is in the range '0' + * ... '9', -1 otherwise + * the next line is similar to the previous one, but we need to decode both + * uppercase and lowercase letters, so we use (ch & 0xdf), which converts + * lowercase to uppercase */ -int hex_to_bin(char ch) +int hex_to_bin(unsigned char ch) { - if ((ch >= '0') && (ch <= '9')) - return ch - '0'; - ch = tolower(ch); - if ((ch >= 'a') && (ch <= 'f')) - return ch - 'a' + 10; - return -1; + unsigned char cu = ch & 0xdf; + return -1 + + ((ch - '0' + 1) & (unsigned)((ch - '9' - 1) & ('0' - 1 - ch)) >> 8) + + ((cu - 'A' + 11) & (unsigned)((cu - 'F' - 1) & ('A' - 1 - cu)) >> 8); } EXPORT_SYMBOL(hex_to_bin);

From: Shin'ichiro Kawasaki shinichiro.kawasaki@wdc.com

commit c7d2f89fea26c84d5accc55d9976dd7e5305e63a upstream.

Commit e8604b1447b4 introduced a call to the helper function msi_first_desc(), which needs MSI descriptor mutex lock before call. However, the required mutex lock was not added. This results in lockdep assertion:

WARNING: CPU: 4 PID: 119 at kernel/irq/msi.c:274 msi_first_desc+0xd0/0x10c msi_first_desc+0xd0/0x10c fsl_mc_msi_domain_alloc_irqs+0x7c/0xc0 fsl_mc_populate_irq_pool+0x80/0x3cc

Fix this by adding the mutex lock and unlock around the function call.

Fixes: e8604b1447b4 ("bus: fsl-mc-msi: Simplify MSI descriptor handling") Signed-off-by: Shin'ichiro Kawasaki shinichiro.kawasaki@wdc.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Damien Le Moal damien.lemoal@opensource.wdc.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220412075636.755454-1-shinichiro.kawasaki@wdc.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/bus/fsl-mc/fsl-mc-msi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/fsl-mc/fsl-mc-msi.c b/drivers/bus/fsl-mc/fsl-mc-msi.c index 5e0e4393ce4d..0cfe859a4ac4 100644 --- a/drivers/bus/fsl-mc/fsl-mc-msi.c +++ b/drivers/bus/fsl-mc/fsl-mc-msi.c @@ -224,8 +224,12 @@ int fsl_mc_msi_domain_alloc_irqs(struct device *dev, unsigned int irq_count) if (error) return error;

+ msi_lock_descs(dev); if (msi_first_desc(dev, MSI_DESC_ALL)) - return -EINVAL; + error = -EINVAL; + msi_unlock_descs(dev); + if (error) + return error;

/* * NOTE: Calling this function will trigger the invocation of the

From: Borislav Petkov bp@suse.de

commit f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream.

When resuming from system sleep state, restore_processor_state() restores the boot CPU MSRs. These MSRs could be emulated by microcode. If microcode is not loaded yet, writing to emulated MSRs leads to unchecked MSR access error:

... PM: Calling lapic_suspend+0x0/0x210 unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr) Call Trace: <TASK> ? restore_processor_state x86_acpi_suspend_lowlevel acpi_suspend_enter suspend_devices_and_enter pm_suspend.cold state_store kobj_attr_store sysfs_kf_write kernfs_fop_write_iter new_sync_write vfs_write ksys_write __x64_sys_write do_syscall_64 entry_SYSCALL_64_after_hwframe RIP: 0033:0x7fda13c260a7

To ensure microcode emulated MSRs are available for restoration, load the microcode on the boot CPU before restoring these MSRs.

[ Pawan: write commit message and productize it. ]

Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume") Reported-by: Kyle D. Pelton kyle.d.pelton@intel.com Signed-off-by: Borislav Petkov bp@suse.de Signed-off-by: Pawan Gupta pawan.kumar.gupta@linux.intel.com Tested-by: Kyle D. Pelton kyle.d.pelton@intel.com Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841 Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.165038631... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/microcode.h | 2 ++ arch/x86/kernel/cpu/microcode/core.c | 6 +++--- arch/x86/power/cpu.c | 10 +++++++++- 3 files changed, 14 insertions(+), 4 deletions(-)

--- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -131,10 +131,12 @@ extern void __init load_ucode_bsp(void); extern void load_ucode_ap(void); void reload_early_microcode(void); extern bool initrd_gone; +void microcode_bsp_resume(void); #else static inline void __init load_ucode_bsp(void) { } static inline void load_ucode_ap(void) { } static inline void reload_early_microcode(void) { } +static inline void microcode_bsp_resume(void) { } #endif

#endif /* _ASM_X86_MICROCODE_H */ --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -758,9 +758,9 @@ static struct subsys_interface mc_cpu_in };

/** - * mc_bp_resume - Update boot CPU microcode during resume. + * microcode_bsp_resume - Update boot CPU microcode during resume. */ -static void mc_bp_resume(void) +void microcode_bsp_resume(void) { int cpu = smp_processor_id(); struct ucode_cpu_info *uci = ucode_cpu_info + cpu; @@ -772,7 +772,7 @@ static void mc_bp_resume(void) }

static struct syscore_ops mc_syscore_ops = { - .resume = mc_bp_resume, + .resume = microcode_bsp_resume, };

static int mc_cpu_starting(unsigned int cpu) --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -25,6 +25,7 @@ #include <asm/cpu.h> #include <asm/mmu_context.h> #include <asm/cpu_device_id.h> +#include <asm/microcode.h>

#ifdef CONFIG_X86_32 __visible unsigned long saved_context_ebx; @@ -262,11 +263,18 @@ static void notrace __restore_processor_ x86_platform.restore_sched_clock_state(); mtrr_bp_restore(); perf_restore_debug_store(); - msr_restore_context(ctxt);

c = &cpu_data(smp_processor_id()); if (cpu_has(c, X86_FEATURE_MSR_IA32_FEAT_CTL)) init_ia32_feat_ctl(c); + + microcode_bsp_resume(); + + /* + * This needs to happen after the microcode has been updated upon resume + * because some of the MSRs are "emulated" in microcode. + */ + msr_restore_context(ctxt); }

/* Needed by apm.c */

From: Tejun Heo tj@kernel.org

commit 8c936f9ea11ec4e35e288810a7503b5c841a355f upstream.

When an iocg is in debt, its inuse weight is owned by debt handling and should stay at 1. This invariant was broken when determining the amount of surpluses at the beginning of donation calculation - when an iocg's hierarchical weight is too low, the iocg is excluded from donation calculation and its inuse is reset to its active regardless of its indebtedness, triggering warnings like the following:

WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0 ... RIP: 0010:iocg_kick_waitq+0x392/0x3a0 Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89 RSP: 0018:ffffc90000200d08 EFLAGS: 00010016 ... <IRQ> ioc_timer_fn+0x2e0/0x1470 call_timer_fn+0xa1/0x2c0 ...

As this happens only when an iocg's hierarchical weight is negligible, its impact likely is limited to triggering the warnings. Fix it by skipping resetting inuse of under-weighted debtors.

Signed-off-by: Tejun Heo tj@kernel.org Reported-by: Rik van Riel riel@surriel.com Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling") Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- block/blk-iocost.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/block/blk-iocost.c +++ b/block/blk-iocost.c @@ -2322,7 +2322,17 @@ static void ioc_timer_fn(struct timer_li iocg->hweight_donating = hwa; iocg->hweight_after_donation = new_hwi; list_add(&iocg->surplus_list, &surpluses); - } else { + } else if (!iocg->abs_vdebt) { + /* + * @iocg doesn't have enough to donate. Reset + * its inuse to active. + * + * Don't reset debtors as their inuse's are + * owned by debt handling. This shouldn't affect + * donation calculuation in any meaningful way + * as @iocg doesn't have a meaningful amount of + * share anyway. + */ TRACE_IOCG_PATH(inuse_shortage, iocg, &now, iocg->inuse, iocg->active, iocg->hweight_inuse, new_hwi);

From: Dmitry Baryshkov dmitry.baryshkov@linaro.org

[ Upstream commit be5985b3dbce5ba2af3c8b0f2b7df235c93907e6 ]

Drop affinity hint before freeing the throttling IRQ to fix the following trace:

[ 185.114773] ------------[ cut here ]------------ [ 185.119517] WARNING: CPU: 7 PID: 43 at kernel/irq/manage.c:1887 free_irq+0x3a4/0x3dc [ 185.127474] Modules linked in: [ 185.130618] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S W 5.17.0-rc6-00386-g67382a5b705d-dirty #690 [ 185.147125] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 185.154269] pc : free_irq+0x3a4/0x3dc [ 185.158031] lr : free_irq+0x33c/0x3dc [ 185.161792] sp : ffff80000841bc90 [ 185.165195] x29: ffff80000841bc90 x28: ffffa6edc5c3d000 x27: ffff6d93729e5908 [ 185.172515] x26: 0000000000000000 x25: ffff6d910109fc00 x24: ffff6d91011490e0 [ 185.179838] x23: ffff6d9101149218 x22: 0000000000000080 x21: 0000000000000000 [ 185.187163] x20: ffff6d9101149000 x19: ffff6d910ab61500 x18: ffffffffffffffff [ 185.194487] x17: 2e35202020202020 x16: 2020202020202020 x15: ffff80008841b9a7 [ 185.201805] x14: 00000000000003c9 x13: 0000000000000001 x12: 0000000000000040 [ 185.209135] x11: ffff6d91005aab58 x10: ffff6d91005aab5a x9 : ffffc6a5ad1c5408 [ 185.216455] x8 : ffff6d91005adb88 x7 : 0000000000000000 x6 : ffffc6a5ab5a91f4 [ 185.223776] x5 : 0000000000000000 x4 : ffff6d91011490a8 x3 : ffffc6a5ad266108 [ 185.231098] x2 : 0000000013033204 x1 : ffff6d9101149000 x0 : ffff6d910a9cc000 [ 185.238421] Call trace: [ 185.240932] free_irq+0x3a4/0x3dc [ 185.244334] qcom_cpufreq_hw_cpu_exit+0x78/0xcc [ 185.248985] cpufreq_offline.isra.0+0x228/0x270 [ 185.253639] cpuhp_cpufreq_offline+0x10/0x20 [ 185.258027] cpuhp_invoke_callback+0x16c/0x2b0 [ 185.262592] cpuhp_thread_fun+0x190/0x250 [ 185.266710] smpboot_thread_fn+0x12c/0x230 [ 185.270914] kthread+0xfc/0x100 [ 185.274145] ret_from_fork+0x10/0x20 [ 185.277820] irq event stamp: 212 [ 185.281136] hardirqs last enabled at (211): [<ffffc6a5ac57973c>] _raw_spin_unlock_irqrestore+0x8c/0xa0 [ 185.290775] hardirqs last disabled at (212): [<ffffc6a5ac572100>] __schedule+0x710/0xa10 [ 185.299081] softirqs last enabled at (0): [<ffffc6a5ab50f7b0>] copy_process+0x7d0/0x1a14 [ 185.307475] softirqs last disabled at (0): [<0000000000000000>] 0x0

Fixes: 3ed6dfbd3bb98 ("cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts") Tested-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Reviewed-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpufreq/qcom-cpufreq-hw.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index effbb680b453..740518d8ae16 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -412,6 +412,7 @@ static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data) mutex_unlock(&data->throttle_lock);

cancel_delayed_work_sync(&data->throttle_work); + irq_set_affinity_hint(data->throttle_irq, NULL); free_irq(data->throttle_irq, data); }

From: Dmitry Baryshkov dmitry.baryshkov@linaro.org

[ Upstream commit 6240aaad75e1a623872a830d13393d7aabf1052c ]

The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for throttling, but will not put it, ending up with leaking a reference count and the following backtrace when putting the CPU offline.

Correctly put the reference count of the returned opp instance.

[ 84.418025] ------------[ cut here ]------------ [ 84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190 [ 84.431966] Modules linked in: [ 84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S 5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721 [ 84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--) [ 84.458781] pc : _opp_table_kref_release+0x188/0x190 [ 84.463878] lr : _opp_table_kref_release+0x78/0x190 [ 84.468885] sp : ffff80000841bc70 [ 84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908 [ 84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0 [ 84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80 [ 84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff [ 84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448 [ 84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000 [ 84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000 [ 84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001 [ 84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00 [ 84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0 [ 84.545579] Call trace: [ 84.548101] _opp_table_kref_release+0x188/0x190 [ 84.552842] dev_pm_opp_remove_all_dynamic+0x8c/0xc0 [ 84.557949] qcom_cpufreq_hw_cpu_exit+0x30/0xdc [ 84.562608] cpufreq_offline.isra.0+0x1b4/0x1d8 [ 84.567270] cpuhp_cpufreq_offline+0x10/0x6c [ 84.571663] cpuhp_invoke_callback+0x16c/0x2b0 [ 84.576231] cpuhp_thread_fun+0x190/0x250 [ 84.580353] smpboot_thread_fn+0x12c/0x230 [ 84.584568] kthread+0xfc/0x100 [ 84.587810] ret_from_fork+0x10/0x20 [ 84.591490] irq event stamp: 3482 [ 84.594901] hardirqs last enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c [ 84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c [ 84.611074] softirqs last enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588 [ 84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174 [ 84.627691] ---[ end trace 0000000000000000 ]---

Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reported-by: kernel test robot lkp@intel.com Tested-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Reviewed-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpufreq/qcom-cpufreq-hw.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index dc0d5f84d863..60d38f62308a 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -292,12 +292,18 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)

opp = dev_pm_opp_find_freq_floor(dev, &freq_hz); if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE) - dev_pm_opp_find_freq_ceil(dev, &freq_hz); + opp = dev_pm_opp_find_freq_ceil(dev, &freq_hz);

- throttled_freq = freq_hz / HZ_PER_KHZ; + if (IS_ERR(opp)) { + dev_warn(dev, "Can't find the OPP for throttling: %pe!\n", opp); + } else { + throttled_freq = freq_hz / HZ_PER_KHZ; + + /* Update thermal pressure (the boost frequencies are accepted) */ + arch_update_thermal_pressure(policy->related_cpus, throttled_freq);

- /* Update thermal pressure (the boost frequencies are accepted) */ - arch_update_thermal_pressure(policy->related_cpus, throttled_freq); + dev_pm_opp_put(opp); + }

/* * In the unlikely case policy is unregistered do not enable

From: Pavel Skripkin paskripkin@gmail.com

[ Upstream commit aaf7dbe07385e0b8deb7237eca2a79926bbc7091 ]

syzbot reported warning in usb_submit_urb, which is caused by wrong endpoint type.

This driver uses out bulk endpoint for communication, so let's check if this endpoint is present and bail out early if not.

Fail log:

usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 Modules linked in: CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G W 5.13.0-syzkaller #0 ... Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 ... Call Trace: dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110 dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396

Fixes: 88e58b1a42f8 ("Staging: add udlfb driver") Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/udlfb.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index 90f48b71fd8f..d9eec1b60e66 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -1649,8 +1649,9 @@ static int dlfb_usb_probe(struct usb_interface *intf, const struct device_attribute *attr; struct dlfb_data *dlfb; struct fb_info *info; - int retval = -ENOMEM; + int retval; struct usb_device *usbdev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *out;

/* usb initialization */ dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL); @@ -1664,6 +1665,12 @@ static int dlfb_usb_probe(struct usb_interface *intf, dlfb->udev = usb_get_dev(usbdev); usb_set_intfdata(intf, dlfb);

+ retval = usb_find_common_endpoints(intf->cur_altsetting, NULL, &out, NULL, NULL); + if (retval) { + dev_err(&intf->dev, "Device should have at lease 1 bulk endpoint!\n"); + goto error; + } + dev_dbg(&intf->dev, "console enable=%d\n", console); dev_dbg(&intf->dev, "fb_defio enable=%d\n", fb_defio); dev_dbg(&intf->dev, "shadow enable=%d\n", shadow); @@ -1673,6 +1680,7 @@ static int dlfb_usb_probe(struct usb_interface *intf, if (!dlfb_parse_vendor_descriptor(dlfb, intf)) { dev_err(&intf->dev, "firmware not recognized, incompatible device?\n"); + retval = -ENODEV; goto error; }

@@ -1686,8 +1694,10 @@ static int dlfb_usb_probe(struct usb_interface *intf,

/* allocates framebuffer driver structure, not framebuffer memory */ info = framebuffer_alloc(0, &dlfb->udev->dev); - if (!info) + if (!info) { + retval = -ENOMEM; goto error; + }

dlfb->info = info; info->par = dlfb;

From: Christian Hewitt christianshewitt@gmail.com

[ Upstream commit fd86d85401c2049f652293877c0f7e6e5afc3bbc ]

Amlogic SM1 devices experience CPU stalls and random board wedges when the system idles and CPU cores clock down to lower opp points. Recent vendor kernels include a change to remove 100-250MHz and other distro sources also remove the 500/667MHz points. Unless all 100-667Mhz opps are removed or the CPU governor forced to performance stalls are still observed, so let's remove them to improve stability and uptime.

Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS") Signed-off-by: Christian Hewitt christianshewitt@gmail.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 20 -------------------- 1 file changed, 20 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi index 3d8b1f4f2001..78bdbd2ccc9d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -95,26 +95,6 @@ cpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-shared;

- opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - opp-microvolt = <730000>; - }; - - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <730000>; - }; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <730000>; - }; - - opp-667000000 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <750000>; - }; - opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; opp-microvolt = <770000>;

From: Tong Zhang ztong0001@gmail.com

[ Upstream commit d926054d5565d3cfa2c7c3f7a48e79bcc10453ed ]

Regulator should be disabled in error path as mentioned in _regulator_put(). Also disable accel if gyro cannot be enabled.

[ 16.233604] WARNING: CPU: 0 PID: 2177 at drivers/regulator/core.c:2257 _regulator_put [ 16.240453] Call Trace: [ 16.240572] <TASK> [ 16.240676] regulator_put+0x26/0x40 [ 16.240853] regulator_bulk_free+0x26/0x50 [ 16.241050] release_nodes+0x3f/0x70 [ 16.241225] devres_release_group+0x147/0x1c0 [ 16.241441] ? bmi160_core_probe+0x175/0x3a0 [bmi160_core]

Fixes: 5dea3fb066f0 ("iio: imu: bmi160: added regulator support") Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Tong Zhang ztong0001@gmail.com Link: https://lore.kernel.org/r/20220327154005.806049-1-ztong0001@gmail.com Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/imu/bmi160/bmi160_core.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c index 824b5124a5f5..01336105792e 100644 --- a/drivers/iio/imu/bmi160/bmi160_core.c +++ b/drivers/iio/imu/bmi160/bmi160_core.c @@ -730,7 +730,7 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)

ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET); if (ret) - return ret; + goto disable_regulator;

usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1);

@@ -741,29 +741,37 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi) if (use_spi) { ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val); if (ret) - return ret; + goto disable_regulator; }

ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val); if (ret) { dev_err(dev, "Error reading chip id\n"); - return ret; + goto disable_regulator; } if (val != BMI160_CHIP_ID_VAL) { dev_err(dev, "Wrong chip id, got %x expected %x\n", val, BMI160_CHIP_ID_VAL); - return -ENODEV; + ret = -ENODEV; + goto disable_regulator; }

ret = bmi160_set_mode(data, BMI160_ACCEL, true); if (ret) - return ret; + goto disable_regulator;

ret = bmi160_set_mode(data, BMI160_GYRO, true); if (ret) - return ret; + goto disable_accel;

return 0; + +disable_accel: + bmi160_set_mode(data, BMI160_ACCEL, false); + +disable_regulator: + regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies); + return ret; }

static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig,

From: Chuanhong Guo gch981213@gmail.com

[ Upstream commit 9fe4e0d3cbfe90152137963cc024ecb63db6e8e6 ]

According to the datasheet, mt7622 only has 5 ECC capabilities instead of 7, and the decoding error register is arranged as follows: +------+---------+---------+---------+---------+ | Bits | 19:15 | 14:10 | 9:5 | 4:0 | +------+---------+---------+---------+---------+ | Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 | +------+---------+---------+---------+---------+ This means err_mask should be 0x1f instead of 0x3f and the number of bits shifted in mtk_ecc_get_stats should be 5 instead of 8.

This commit introduces err_shift for the difference in this register and fix other existing parameters.

Public MT7622 reference manual can be found on [0] and the info this commit is based on is from page 656 and page 660.

[0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents

Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.") Signed-off-by: Chuanhong Guo gch981213@gmail.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.co... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/nand/raw/mtk_ecc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c index 1b47964cb6da..4f6adb657c89 100644 --- a/drivers/mtd/nand/raw/mtk_ecc.c +++ b/drivers/mtd/nand/raw/mtk_ecc.c @@ -43,6 +43,7 @@

struct mtk_ecc_caps { u32 err_mask; + u32 err_shift; const u8 *ecc_strength; const u32 *ecc_regs; u8 num_ecc_strength; @@ -76,7 +77,7 @@ static const u8 ecc_strength_mt2712[] = { };

static const u8 ecc_strength_mt7622[] = { - 4, 6, 8, 10, 12, 14, 16 + 4, 6, 8, 10, 12 };

enum mtk_ecc_regs { @@ -221,7 +222,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats, for (i = 0; i < sectors; i++) { offset = (i >> 2) << 2; err = readl(ecc->regs + ECC_DECENUM0 + offset); - err = err >> ((i % 4) * 8); + err = err >> ((i % 4) * ecc->caps->err_shift); err &= ecc->caps->err_mask; if (err == ecc->caps->err_mask) { /* uncorrectable errors */ @@ -449,6 +450,7 @@ EXPORT_SYMBOL(mtk_ecc_get_parity_bits);

static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = { .err_mask = 0x3f, + .err_shift = 8, .ecc_strength = ecc_strength_mt2701, .ecc_regs = mt2701_ecc_regs, .num_ecc_strength = 20, @@ -459,6 +461,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {

static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = { .err_mask = 0x7f, + .err_shift = 8, .ecc_strength = ecc_strength_mt2712, .ecc_regs = mt2712_ecc_regs, .num_ecc_strength = 23, @@ -468,10 +471,11 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = { };

static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = { - .err_mask = 0x3f, + .err_mask = 0x1f, + .err_shift = 5, .ecc_strength = ecc_strength_mt7622, .ecc_regs = mt7622_ecc_regs, - .num_ecc_strength = 7, + .num_ecc_strength = 5, .ecc_mode_shift = 4, .parity_bits = 13, .pg_irq_sel = 0,

From: Maciej Fijalkowski maciej.fijalkowski@intel.com

[ Upstream commit 8de8b71b787f38983d414d2dba169a3bfefa668a ]

While checking AF_XDP copy mode combined with busy poll, strange results were observed. rxdrop and txonly scenarios worked fine, but l2fwd broke immediately.

After a deeper look, it turned out that for l2fwd, Tx side was exiting early due to xsk_no_wakeup() returning true and in the end xsk_generic_xmit() was never called. Note that AF_XDP Tx in copy mode is syscall steered, so the current behavior is broken.

Txonly scenario only worked due to the fact that sk_mark_napi_id_once_xdp() was never called - since Rx side is not in the picture for this case and mentioned function is called in xsk_rcv_check(), sk::sk_napi_id was never set, which in turn meant that xsk_no_wakeup() was returning false (see the sk->sk_napi_id >= MIN_NAPI_ID check in there).

To fix this, prefer busy poll in xsk_sendmsg() only when zero copy is enabled on a given AF_XDP socket. By doing so, busy poll in copy mode would not exit early on Tx side and eventually xsk_generic_xmit() will be called.

Fixes: a0731952d9cd ("xsk: Add busy-poll support for {recv,send}msg()") Signed-off-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20220406155804.434493-1-maciej.fijalkowski@intel... Signed-off-by: Sasha Levin sashal@kernel.org --- net/xdp/xsk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index ac343cd8ff3f..39a82bfb5caa 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -640,7 +640,7 @@ static int __xsk_sendmsg(struct socket *sock, struct msghdr *m, size_t total_len if (sk_can_busy_loop(sk)) sk_busy_loop(sk, 1); /* only support non-blocking sockets */

- if (xsk_no_wakeup(sk)) + if (xs->zc && xsk_no_wakeup(sk)) return 0;

pool = xs->pool;

From: Weitao Wang WeitaoWang-oc@zhaoxin.com

[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ]

In some situations software handles TRB events slower than adding TRBs. If the number of TRB events to be processed in a given interrupt is exactly the same as the event ring size 256, then the local variable "event_ring_deq" that holds the initial dequeue position is equal to software_dequeue after handling all 256 interrupts.

It will cause driver to not update ERDP to hardware,

Software dequeue pointer is out of sync with ERDP on interrupt exit. On the next interrupt, the event ring may full but driver will not update ERDP as software_dequeue is equal to ERDP.

[ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37 [ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00 [ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command. [ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110 [ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead [ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD [ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00 [ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD

Hardware ERDP is updated mid event handling if there are more than 128 events in an interrupt (half of ring size). Fix this by updating the software local variable at the same time as hardware ERDP.

[commit message rewording -Mathias]

Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Reviewed-by: Peter Chen peter.chen@kernel.org Signed-off-by: Weitao Wang WeitaoWang-oc@zhaoxin.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/xhci-ring.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index d0b6806275e0..f9707997969d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3141,6 +3141,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) if (event_loop++ < TRBS_PER_SEGMENT / 2) continue; xhci_update_erst_dequeue(xhci, event_ring_deq); + event_ring_deq = xhci->event_ring->dequeue;

/* ring is half-full, force isoc trbs to interrupt more often */ if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)

From: Fabio Estevam festevam@gmail.com

[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]

On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec on the SoM is often not detected and the following error message is seen when the sgtl5000 driver tries to read the ID register:

sgtl5000 1-000a: Error reading chip id -6

The reason for the error is that the MCLK clock is not provided early enough.

Fix the problem by describing the MCLK pinctrl inside the codec node instead of placing it inside the audmux pinctrl group.

With this change applied the sgtl5000 is always detected on every boot.

Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM") Signed-off-by: Fabio Estevam festevam@gmail.com Reviewed-by: Tim Harvey tharvey@gateworks.com Acked-by: Max Krummenacher max.krummenacher@toradex.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index ed2739e39085..bd763bae596b 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -286,6 +286,8 @@ vgen6_reg: vgen6 { codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <&reg_module_3v3_audio>; VDDIO-supply = <&reg_module_3v3>; @@ -517,8 +519,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; };

@@ -811,6 +811,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 >; };

+ pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0

From: Alexander Stein alexander.stein@ew.tq-group.com

[ Upstream commit c7b45c79fb279e539346919a5c196e417925719e ]

This fixes the qspi read command by importing the changes from commit 04aa946d57b2 ("arm64: dts: imx8: change the spi-nor tx").

Fixes: b186b8b6e770 ("arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M") Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi index 8aedcddfeab8..2c63b01e93e0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi @@ -253,7 +253,7 @@ flash0: flash@0 { #address-cells = <1>; #size-cells = <1>; spi-max-frequency = <84000000>; - spi-tx-bus-width = <4>; + spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; }; };

From: Guillaume Giraudon ggiraudon@prism19.com

[ Upstream commit 962dd65e575dde950ef0844568edc37cfb39f302 ]

The labels for lines 61 through 84 on the periphs-banks were offset by 2. 2 lines are missing in the BOOT GPIO lines (contains 14, should be 16) Added 2 empty entries in BOOT to realigned the rest of GPIO labels to match the Banana Pi M5 schematics.

(Thanks to Neil Armstrong for the heads up on the position of the missing pins)

Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts") Signed-off-by: Guillaume Giraudon ggiraudon@prism19.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20220411144427.874-1-ggiraudon@prism19.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index 5751c48620ed..cadba194b149 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -437,6 +437,7 @@ &gpio { "", "eMMC_RST#", /* BOOT_12 */ "eMMC_DS", /* BOOT_13 */ + "", "", /* GPIOC */ "SD_D0_B", /* GPIOC_0 */ "SD_D1_B", /* GPIOC_1 */

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 5c8402c4db45dd55c2c93c8d730f5dfa7c78a702 ]

The actions of of_find_i2c_device_by_node() in probe function should be reversed in error paths by putting the reference to obtained device.

Fixes: bcff4cba41bc ("PHY: Exynos: Add Exynos5250 SATA PHY driver") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Reviewed-by: Alim Akhtar alim.akhtar@samsung.com Link: https://lore.kernel.org/r/20220407091857.230386-2-krzysztof.kozlowski@linaro... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/samsung/phy-exynos5250-sata.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c index 6c305a3fe187..595adba5fb8f 100644 --- a/drivers/phy/samsung/phy-exynos5250-sata.c +++ b/drivers/phy/samsung/phy-exynos5250-sata.c @@ -196,20 +196,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); if (IS_ERR(sata_phy->phyclk)) { dev_err(dev, "failed to get clk for PHY\n"); - return PTR_ERR(sata_phy->phyclk); + ret = PTR_ERR(sata_phy->phyclk); + goto put_dev; }

ret = clk_prepare_enable(sata_phy->phyclk); if (ret < 0) { dev_err(dev, "failed to enable source clk\n"); - return ret; + goto put_dev; }

sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops); if (IS_ERR(sata_phy->phy)) { - clk_disable_unprepare(sata_phy->phyclk); dev_err(dev, "failed to create PHY\n"); - return PTR_ERR(sata_phy->phy); + ret = PTR_ERR(sata_phy->phy); + goto clk_disable; }

phy_set_drvdata(sata_phy->phy, sata_phy); @@ -217,11 +218,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { - clk_disable_unprepare(sata_phy->phyclk); - return PTR_ERR(phy_provider); + ret = PTR_ERR(phy_provider); + goto clk_disable; }

return 0; + +clk_disable: + clk_disable_unprepare(sata_phy->phyclk); +put_dev: + put_device(&sata_phy->client->dev); + + return ret; }

static const struct of_device_id exynos_sata_phy_of_match[] = {

From: Tony Lindgren tony@atomide.com

[ Upstream commit a12315d6d27093392b6c634e1d35a59f1d1f7a59 ]

On beagleboard revisions A to B4 we need to use gpt12 as the system timer. However, the quirk handling added for gpt12 caused a regression for system suspend for am335x as the PM coprocessor needs the timers idled for suspend.

Let's make the gpt12 quirk specific to omap34xx, other SoCs don't need it. Beagleboard revisions C and later no longer need to use the gpt12 related quirk. Then at some point, if we decide to drop support for the old beagleboard revisions A to B4, we can also drop the gpt12 related quirks completely.

Fixes: 3ff340e24c9d ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status") Reported-by: Kevin Hilman khilman@baylibre.com Suggested-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/ti-sysc.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c index 54c0ee6dda30..7a1b1f9e4933 100644 --- a/drivers/bus/ti-sysc.c +++ b/drivers/bus/ti-sysc.c @@ -3232,13 +3232,27 @@ static int sysc_check_disabled_devices(struct sysc *ddata) */ static int sysc_check_active_timer(struct sysc *ddata) { + int error; + if (ddata->cap->type != TI_SYSC_OMAP2_TIMER && ddata->cap->type != TI_SYSC_OMAP4_TIMER) return 0;

+ /* + * Quirk for omap3 beagleboard revision A to B4 to use gpt12. + * Revision C and later are fixed with commit 23885389dbbb ("ARM: + * dts: Fix timer regression for beagleboard revision c"). This all + * can be dropped if we stop supporting old beagleboard revisions + * A to B4 at some point. + */ + if (sysc_soc->soc == SOC_3430) + error = -ENXIO; + else + error = -EBUSY; + if ((ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT) && (ddata->cfg.quirks & SYSC_QUIRK_NO_IDLE)) - return -ENXIO; + return error;

return 0; }

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 3588060befff75ff39fab7122b94c6fb3148fcda ]

The corresponding API for clk_prepare_enable is clk_disable_unprepare. Make sure that the clock is unprepared on exit by changing clk_disable to clk_disable_unprepare.

Fixes: ed31ee7cf1fe ("phy: ti: usb2: Fix logic on -EPROBE_DEFER") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220318105748.19532-1-linmq006@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/ti/phy-omap-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c index 3a505fe5715a..31a775877f6e 100644 --- a/drivers/phy/ti/phy-omap-usb2.c +++ b/drivers/phy/ti/phy-omap-usb2.c @@ -215,7 +215,7 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy) return 0;

err1: - clk_disable(phy->wkupclk); + clk_disable_unprepare(phy->wkupclk);

err0: return ret;

From: Claudiu Beznea claudiu.beznea@microchip.com

[ Upstream commit 5c8b49852910caffeebb1ce541fdd264ffc691b8 ]

Pinctrl phandle is for spi1 so rename it to reflect this.

Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Link: https://lore.kernel.org/r/20220331141323.194355-1-claudiu.beznea@microchip.c... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index d241c24f0d83..accb92cfac44 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -82,7 +82,7 @@ usart4: serial@fc010000 {

spi1: spi@fc018000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi0_cs>; + pinctrl-0 = <&pinctrl_spi1_cs>; cs-gpios = <&pioB 21 0>; status = "okay"; }; @@ -140,7 +140,7 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 { atmel,pins = <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; - pinctrl_spi0_cs: spi0_cs_default { + pinctrl_spi1_cs: spi1_cs_default { atmel,pins = <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; };

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit d644e0d79829b1b9a14beedbdb0dc1256fc3677d ]

The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). And use pm_runtime_dont_use_autosuspend() to undo pm_runtime_use_autosuspend() In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc.

We should do this in error handling.

Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220301024615.31899-1-linmq006@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/motorola/phy-mapphone-mdm6600.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c index 5172971f4c36..3cd4d51c247c 100644 --- a/drivers/phy/motorola/phy-mapphone-mdm6600.c +++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c @@ -629,7 +629,8 @@ static int phy_mdm6600_probe(struct platform_device *pdev) cleanup: if (error < 0) phy_mdm6600_device_power_off(ddata); - + pm_runtime_disable(ddata->dev); + pm_runtime_dont_use_autosuspend(ddata->dev); return error; }

From: Stephen Boyd swboyd@chromium.org

[ Upstream commit 2f3724930eb4bba74f7d10bc3bef5bb22dd323df ]

The IPA BCM resource ("IP0") on sc7180 was moved to the clk-rpmh driver in commit bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") and modeled as a clk, but this interconnect driver still had it modeled as an interconnect. This was mostly OK because nobody used the interconnect definition, until the interconnect framework started dropping bandwidth requests on interconnects that aren't used via the sync_state callback in commit 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state"). Once that patch was applied the IP0 resource was going to be controlled from two places, the clk framework and the interconnect framework.

Even then, things were probably going to be OK, because commit b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") was needed to actually drop bandwidth requests on unused interconnects, of which the IPA was one of the interconnect that wasn't getting dropped to zero. Combining the three commits together leads to bad behavior where the interconnect framework is disabling the IP0 resource because it has no users while the clk framework thinks the IP0 resource is on because the only user, the IPA driver, has turned it on via clk_prepare_enable(). Depending on when sync_state is called, we can get into a situation like below:

IPA driver probes IPA driver gets notified modem started runtime PM get() IPA clk enabled -> IP0 resource is ON sync_state runs interconnect zeroes out the IP0 resource -> IP0 resource is off IPA driver tries to access a register and blows up

The crash is an unclocked access that manifest as an SError.

SError Interrupt on CPU0, code 0xbe000011 -- SError CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mutex_lock+0x4c/0x80 lr : mutex_lock+0x30/0x80 sp : ffffffc00da9b9c0 x29: ffffffc00da9b9c0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffc00da9bc90 x25: ffffff80c2024010 x24: ffffff80c2024000 x23: ffffff8083100000 x22: ffffff80831000d0 x21: ffffff80831000a8 x20: ffffff80831000a8 x19: ffffff8083100070 x18: 00000000ffff0a00 x17: 000000002f7254f1 x16: 0000000000000100 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 000000000001f0b8 x10: ffffffc00931f0b8 x9 : 0000000000000000 x8 : 0000000000000000 x7 : fefefefefeff2f60 x6 : 0000808080808080 x5 : 0000000000000000 x4 : 8080808080800000 x3 : ffffff80d2d4ee28 x2 : ffffff808c1d6e40 x1 : 0000000000000000 x0 : ffffff8083100070 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 0 PID: 3595 Comm: mmdata_mgr Not tainted 5.17.1+ #166 Hardware name: Google Lazor (rev1 - 2) with LTE (DT) Call trace: dump_backtrace+0xf4/0x114 show_stack+0x24/0x30 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 panic+0x150/0x38c nmi_panic+0x88/0xa0 arm64_serror_panic+0x74/0x80 do_serror+0x0/0x80 do_serror+0x58/0x80 el1h_64_error_handler+0x34/0x4c el1h_64_error+0x78/0x7c mutex_lock+0x4c/0x80 __gsi_channel_start+0x50/0x17c gsi_channel_start+0x54/0x90 ipa_endpoint_enable_one+0x34/0xc0 ipa_open+0x4c/0x120

Remove all IP0 resource management from the interconnect driver so that clk-rpmh is the sole owner. This fixes the issue by preventing the interconnect driver from overwriting the IP0 resource data that the clk-rpmh driver wrote.

Cc: Alex Elder elder@linaro.org Cc: Bjorn Andersson bjorn.andersson@linaro.org Cc: Taniya Das quic_tdas@quicinc.com Cc: Mike Tipton quic_mdtipton@quicinc.com Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate") Fixes: bcd63d222b60 ("clk: qcom: rpmh: Add IPA clock for SC7180") Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Signed-off-by: Stephen Boyd swboyd@chromium.org Tested-by: Alex Elder elder@linaro.org Reviewed-by: Alex Elder elder@linaro.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220412220033.1273607-2-swboyd@chromium.org Signed-off-by: Georgi Djakov djakov@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/interconnect/qcom/sc7180.c | 21 --------------------- 1 file changed, 21 deletions(-)

diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c index 12d59c36df53..5f7c0f85fa8e 100644 --- a/drivers/interconnect/qcom/sc7180.c +++ b/drivers/interconnect/qcom/sc7180.c @@ -47,7 +47,6 @@ DEFINE_QNODE(qnm_mnoc_sf, SC7180_MASTER_MNOC_SF_MEM_NOC, 1, 32, SC7180_SLAVE_GEM DEFINE_QNODE(qnm_snoc_gc, SC7180_MASTER_SNOC_GC_MEM_NOC, 1, 8, SC7180_SLAVE_LLCC); DEFINE_QNODE(qnm_snoc_sf, SC7180_MASTER_SNOC_SF_MEM_NOC, 1, 16, SC7180_SLAVE_LLCC); DEFINE_QNODE(qxm_gpu, SC7180_MASTER_GFX3D, 2, 32, SC7180_SLAVE_GEM_NOC_SNOC, SC7180_SLAVE_LLCC); -DEFINE_QNODE(ipa_core_master, SC7180_MASTER_IPA_CORE, 1, 8, SC7180_SLAVE_IPA_CORE); DEFINE_QNODE(llcc_mc, SC7180_MASTER_LLCC, 2, 4, SC7180_SLAVE_EBI1); DEFINE_QNODE(qhm_mnoc_cfg, SC7180_MASTER_CNOC_MNOC_CFG, 1, 4, SC7180_SLAVE_SERVICE_MNOC); DEFINE_QNODE(qxm_camnoc_hf0, SC7180_MASTER_CAMNOC_HF0, 2, 32, SC7180_SLAVE_MNOC_HF_MEM_NOC); @@ -129,7 +128,6 @@ DEFINE_QNODE(qhs_mdsp_ms_mpu_cfg, SC7180_SLAVE_MSS_PROC_MS_MPU_CFG, 1, 4); DEFINE_QNODE(qns_gem_noc_snoc, SC7180_SLAVE_GEM_NOC_SNOC, 1, 8, SC7180_MASTER_GEM_NOC_SNOC); DEFINE_QNODE(qns_llcc, SC7180_SLAVE_LLCC, 1, 16, SC7180_MASTER_LLCC); DEFINE_QNODE(srvc_gemnoc, SC7180_SLAVE_SERVICE_GEM_NOC, 1, 4); -DEFINE_QNODE(ipa_core_slave, SC7180_SLAVE_IPA_CORE, 1, 8); DEFINE_QNODE(ebi, SC7180_SLAVE_EBI1, 2, 4); DEFINE_QNODE(qns_mem_noc_hf, SC7180_SLAVE_MNOC_HF_MEM_NOC, 1, 32, SC7180_MASTER_MNOC_HF_MEM_NOC); DEFINE_QNODE(qns_mem_noc_sf, SC7180_SLAVE_MNOC_SF_MEM_NOC, 1, 32, SC7180_MASTER_MNOC_SF_MEM_NOC); @@ -160,7 +158,6 @@ DEFINE_QBCM(bcm_mc0, "MC0", true, &ebi); DEFINE_QBCM(bcm_sh0, "SH0", true, &qns_llcc); DEFINE_QBCM(bcm_mm0, "MM0", false, &qns_mem_noc_hf); DEFINE_QBCM(bcm_ce0, "CE0", false, &qxm_crypto); -DEFINE_QBCM(bcm_ip0, "IP0", false, &ipa_core_slave); DEFINE_QBCM(bcm_cn0, "CN0", true, &qnm_snoc, &xm_qdss_dap, &qhs_a1_noc_cfg, &qhs_a2_noc_cfg, &qhs_ahb2phy0, &qhs_aop, &qhs_aoss, &qhs_boot_rom, &qhs_camera_cfg, &qhs_camera_nrt_throttle_cfg, &qhs_camera_rt_throttle_cfg, &qhs_clk_ctl, &qhs_cpr_cx, &qhs_cpr_mx, &qhs_crypto0_cfg, &qhs_dcc_cfg, &qhs_ddrss_cfg, &qhs_display_cfg, &qhs_display_rt_throttle_cfg, &qhs_display_throttle_cfg, &qhs_glm, &qhs_gpuss_cfg, &qhs_imem_cfg, &qhs_ipa, &qhs_mnoc_cfg, &qhs_mss_cfg, &qhs_npu_cfg, &qhs_npu_dma_throttle_cfg, &qhs_npu_dsp_throttle_cfg, &qhs_pimem_cfg, &qhs_prng, &qhs_qdss_cfg, &qhs_qm_cfg, &qhs_qm_mpu_cfg, &qhs_qup0, &qhs_qup1, &qhs_security, &qhs_snoc_cfg, &qhs_tcsr, &qhs_tlmm_1, &qhs_tlmm_2, &qhs_tlmm_3, &qhs_ufs_mem_cfg, &qhs_usb3, &qhs_venus_cfg, &qhs_venus_throttle_cfg, &qhs_vsense_ctrl_cfg, &srvc_cnoc); DEFINE_QBCM(bcm_mm1, "MM1", false, &qxm_camnoc_hf0_uncomp, &qxm_camnoc_hf1_uncomp, &qxm_camnoc_sf_uncomp, &qhm_mnoc_cfg, &qxm_mdp0, &qxm_rot, &qxm_venus0, &qxm_venus_arm9); DEFINE_QBCM(bcm_sh2, "SH2", false, &acm_sys_tcu); @@ -372,22 +369,6 @@ static struct qcom_icc_desc sc7180_gem_noc = { .num_bcms = ARRAY_SIZE(gem_noc_bcms), };

-static struct qcom_icc_bcm *ipa_virt_bcms[] = { - &bcm_ip0, -}; - -static struct qcom_icc_node *ipa_virt_nodes[] = { - [MASTER_IPA_CORE] = &ipa_core_master, - [SLAVE_IPA_CORE] = &ipa_core_slave, -}; - -static struct qcom_icc_desc sc7180_ipa_virt = { - .nodes = ipa_virt_nodes, - .num_nodes = ARRAY_SIZE(ipa_virt_nodes), - .bcms = ipa_virt_bcms, - .num_bcms = ARRAY_SIZE(ipa_virt_bcms), -}; - static struct qcom_icc_bcm *mc_virt_bcms[] = { &bcm_acv, &bcm_mc0, @@ -519,8 +500,6 @@ static const struct of_device_id qnoc_of_match[] = { .data = &sc7180_dc_noc}, { .compatible = "qcom,sc7180-gem-noc", .data = &sc7180_gem_noc}, - { .compatible = "qcom,sc7180-ipa-virt", - .data = &sc7180_ipa_virt}, { .compatible = "qcom,sc7180-mc-virt", .data = &sc7180_mc_virt}, { .compatible = "qcom,sc7180-mmss-noc",

From: H. Nikolaus Schaller hns@goldelico.com

[ Upstream commit 09269dd050094593fc747f2a5853d189fefcb6b5 ]

Commit a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") introduces general mmc aliases. Let's tailor them to the need of the GTA04 board which does not make use of mmc2 and mmc3 interfaces.

Fixes: a1ebdb374199 ("ARM: dts: Fix swapped mmc order for omap3") Signed-off-by: H. Nikolaus Schaller hns@goldelico.com Message-Id: dc9173ee3d391d9e92b7ab8ed4f84b29f0a21c83.1646744420.git.hns@goldelico.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/omap3-gta04.dtsi | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 7e3d8147e2c1..0365f06165e9 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -31,6 +31,8 @@ chosen { aliases { display0 = &lcd; display1 = &tv0; + /delete-property/ mmc2; + /delete-property/ mmc3; };

ldo_3v3: fixedregulator {

From: Adam Ford aford173@gmail.com

[ Upstream commit 942da3af32b2288e674736eb159d1fc676261691 ]

The bootloader for the AM3517 has previously done much of the pin muxing, but as the bootloader is moving more and more to a model based on the device tree, it may no longer automatically mux the pins, so it is necessary to add the pinmuxing to the Linux device trees so the respective peripherals can remain functional.

Fixes: 6ed1d7997561 ("ARM: dts: am3517-evm: Add support for UI board and Audio") Signed-off-by: Adam Ford aford173@gmail.com Message-Id: 20220226214820.747847-1-aford173@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am3517-evm.dts | 45 +++++++++++++++++++++++++++---- arch/arm/boot/dts/am3517-som.dtsi | 9 +++++++ 2 files changed, 49 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 0d2fac98ce7d..c8b80f156ec9 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -161,6 +161,8 @@ pwm11: dmtimer-pwm@11 {

/* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -168,7 +170,9 @@ hsusb1_phy: hsusb1_phy { };

&davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ethernet_pins>; + status = "okay"; };

&davinci_mdio { @@ -193,6 +197,8 @@ dpi_out: endpoint { };

&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -205,6 +211,8 @@ tca6416: gpio@21 { };

&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; };

@@ -223,6 +231,8 @@ &mmc3 { };

&usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; };

@@ -231,8 +241,35 @@ &usbhsehci { };

&omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + };

leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -300,8 +337,6 @@ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */ };

&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>;

hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index 8b669e2eafec..f7b680f6c48a 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -69,6 +69,8 @@ nand@0,0 { };

&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>;

s35390a: s35390a@30 { @@ -179,6 +181,13 @@ bluetooth {

&omap3_pmx_core {

+ i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */

From: Luca Weiss luca.weiss@fairphone.com

[ Upstream commit ef0beba1a5fb0c693ddf7d31246bd96c925ffd00 ]

In other places the SDC and UFS pins have been swapped but this was missed in the PINCTRL_PIN definitions. Fix that.

Fixes: 7d74b55afd27 ("pinctrl: qcom: Add SM6350 pinctrl driver") Signed-off-by: Luca Weiss luca.weiss@fairphone.com Link: https://lore.kernel.org/r/20220318183004.858707-5-luca.weiss@fairphone.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/qcom/pinctrl-sm6350.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-sm6350.c b/drivers/pinctrl/qcom/pinctrl-sm6350.c index 4d37b817b232..a91a86628f2f 100644 --- a/drivers/pinctrl/qcom/pinctrl-sm6350.c +++ b/drivers/pinctrl/qcom/pinctrl-sm6350.c @@ -264,14 +264,14 @@ static const struct pinctrl_pin_desc sm6350_pins[] = { PINCTRL_PIN(153, "GPIO_153"), PINCTRL_PIN(154, "GPIO_154"), PINCTRL_PIN(155, "GPIO_155"), - PINCTRL_PIN(156, "SDC1_RCLK"), - PINCTRL_PIN(157, "SDC1_CLK"), - PINCTRL_PIN(158, "SDC1_CMD"), - PINCTRL_PIN(159, "SDC1_DATA"), - PINCTRL_PIN(160, "SDC2_CLK"), - PINCTRL_PIN(161, "SDC2_CMD"), - PINCTRL_PIN(162, "SDC2_DATA"), - PINCTRL_PIN(163, "UFS_RESET"), + PINCTRL_PIN(156, "UFS_RESET"), + PINCTRL_PIN(157, "SDC1_RCLK"), + PINCTRL_PIN(158, "SDC1_CLK"), + PINCTRL_PIN(159, "SDC1_CMD"), + PINCTRL_PIN(160, "SDC1_DATA"), + PINCTRL_PIN(161, "SDC2_CLK"), + PINCTRL_PIN(162, "SDC2_CMD"), + PINCTRL_PIN(163, "SDC2_DATA"), };

#define DECLARE_MSM_GPIO_PINS(pin) \

From: Heiner Kallweit hkallweit1@gmail.com

[ Upstream commit 2c8045d48dee703ad8eab2be7d6547765a89c069 ]

If clk_prepare_enable() fails we call clk_disable_unprepare() in the error path what results in a warning that the clock is disabled and unprepared already. And if we fail later in phy_g12a_usb3_pcie_probe() then we bail out w/o calling clk_disable_unprepare(). This patch fixes both errors.

Fixes: 36077e16c050 ("phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver") Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Link: https://lore.kernel.org/r/8e416f95-1084-ee28-860e-7884f7fa2e32@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../phy/amlogic/phy-meson-g12a-usb3-pcie.c | 20 +++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c index 5b471ab80fe2..54d65a6f0fcc 100644 --- a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c +++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c @@ -414,19 +414,19 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)

ret = clk_prepare_enable(priv->clk_ref); if (ret) - goto err_disable_clk_ref; + return ret;

priv->reset = devm_reset_control_array_get_exclusive(dev); - if (IS_ERR(priv->reset)) - return PTR_ERR(priv->reset); + if (IS_ERR(priv->reset)) { + ret = PTR_ERR(priv->reset); + goto err_disable_clk_ref; + }

priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops); if (IS_ERR(priv->phy)) { ret = PTR_ERR(priv->phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - - return ret; + dev_err_probe(dev, ret, "failed to create PHY\n"); + goto err_disable_clk_ref; }

phy_set_drvdata(priv->phy, priv); @@ -434,8 +434,12 @@ static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev)

phy_provider = devm_of_phy_provider_register(dev, phy_g12a_usb3_pcie_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + goto err_disable_clk_ref; + }

- return PTR_ERR_OR_ZERO(phy_provider); + return 0;

err_disable_clk_ref: clk_disable_unprepare(priv->clk_ref);

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 084c16ab423a8890121b902b405823bfec5b4365 ]

wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case.

Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/nand/raw/sh_flctl.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c index 13df4bdf792a..8f89e2d3d817 100644 --- a/drivers/mtd/nand/raw/sh_flctl.c +++ b/drivers/mtd/nand/raw/sh_flctl.c @@ -384,7 +384,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, dma_addr_t dma_addr; dma_cookie_t cookie; uint32_t reg; - int ret; + int ret = 0; + unsigned long time_left;

if (dir == DMA_FROM_DEVICE) { chan = flctl->chan_fifo0_rx; @@ -425,13 +426,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf, goto out; }

- ret = + time_left = wait_for_completion_timeout(&flctl->dma_complete, msecs_to_jiffies(3000));

- if (ret <= 0) { + if (time_left == 0) { dmaengine_terminate_all(chan); dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n"); + ret = -ETIMEDOUT; }

out: @@ -441,7 +443,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,

dma_unmap_single(chan->device->dev, dma_addr, len, dir);

- /* ret > 0 is success */ + /* ret == 0 is success */ return ret; }

@@ -465,7 +467,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)

/* initiate DMA transfer */ if (flctl->chan_fifo0_rx && rlen >= 32 && - flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0) + !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE)) goto convert; /* DMA success */

/* do polling transfer */ @@ -524,7 +526,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,

/* initiate DMA transfer */ if (flctl->chan_fifo0_tx && rlen >= 32 && - flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0) + !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE)) return; /* DMA success */

/* do polling transfer */

From: Marek Vasut marex@denx.de

[ Upstream commit e74200ebf7c4f6a7a7d1be9f63833ddba251effa ]

The stm32_gpio_get() should only be called for LEVEL triggered interrupts, skip calling it for EDGE triggered interrupts altogether to avoid wasting CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are the majority and LEVEL triggered interrupts are the exception no less, and the CPU cycles are not abundant.

Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip") Signed-off-by: Marek Vasut marex@denx.de Cc: Alexandre Torgue alexandre.torgue@foss.st.com Cc: Fabien Dessenne fabien.dessenne@foss.st.com Cc: Linus Walleij linus.walleij@linaro.org Cc: Marc Zyngier maz@kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org To: linux-gpio@vger.kernel.org Link: https://lore.kernel.org/r/20220415215410.498349-1-marex@denx.de Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/stm32/pinctrl-stm32.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 9ed764731570..df1d6b466fb7 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -311,6 +311,10 @@ static void stm32_gpio_irq_trigger(struct irq_data *d) struct stm32_gpio_bank *bank = d->domain->host_data; int level;

+ /* Do not access the GPIO if this is not LEVEL triggered IRQ. */ + if (!(bank->irq_type[d->hwirq] & IRQ_TYPE_LEVEL_MASK)) + return; + /* If level interrupt type then retrig */ level = stm32_gpio_get(&bank->gpio_chip, d->hwirq); if ((level == 0 && bank->irq_type[d->hwirq] == IRQ_TYPE_LEVEL_LOW) ||

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit fc06b2867f4cea543505acfb194c2be4ebf0c7d3 ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. of_node_put() will check for NULL value.

Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/dsa/port.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/dsa/port.c b/net/dsa/port.c index 1a40c52f5a42..4368fd32c4a5 100644 --- a/net/dsa/port.c +++ b/net/dsa/port.c @@ -1240,8 +1240,10 @@ int dsa_port_link_register_of(struct dsa_port *dp) if (ds->ops->phylink_mac_link_down) ds->ops->phylink_mac_link_down(ds, port, MLO_AN_FIXED, PHY_INTERFACE_MODE_NA); + of_node_put(phy_np); return dsa_port_phylink_register(dp); } + of_node_put(phy_np); return 0; }

From: Eyal Birger eyal.birger@gmail.com

[ Upstream commit b02d196c44ead1a5949729be9ff08fe781c3e48a ]

xmit_check_hhlen() observes the dst for getting the device hard header length to make sure a modified packet can fit. When a helper which changes the dst - such as bpf_skb_set_tunnel_key() - is called as part of the xmit program the accessed dst is no longer valid.

This leads to the following splat:

BUG: kernel NULL pointer dereference, address: 00000000000000de #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ #103 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:bpf_xmit+0xfb/0x17f Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000 FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0 Call Trace: <TASK> lwtunnel_xmit.cold+0x71/0xc8 ip_finish_output2+0x279/0x520 ? __ip_finish_output.part.0+0x21/0x130

Fix by fetching the device hard header length before running the BPF code.

Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by: Eyal Birger eyal.birger@gmail.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/lwt_bpf.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c index 349480ef68a5..8b6b5e72b217 100644 --- a/net/core/lwt_bpf.c +++ b/net/core/lwt_bpf.c @@ -159,10 +159,8 @@ static int bpf_output(struct net *net, struct sock *sk, struct sk_buff *skb) return dst->lwtstate->orig_output(net, sk, skb); }

-static int xmit_check_hhlen(struct sk_buff *skb) +static int xmit_check_hhlen(struct sk_buff *skb, int hh_len) { - int hh_len = skb_dst(skb)->dev->hard_header_len; - if (skb_headroom(skb) < hh_len) { int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb));

@@ -274,6 +272,7 @@ static int bpf_xmit(struct sk_buff *skb)

bpf = bpf_lwt_lwtunnel(dst->lwtstate); if (bpf->xmit.prog) { + int hh_len = dst->dev->hard_header_len; __be16 proto = skb->protocol; int ret;

@@ -291,7 +290,7 @@ static int bpf_xmit(struct sk_buff *skb) /* If the header was expanded, headroom might be too * small for L2 header to come, expand as needed. */ - ret = xmit_check_hhlen(skb); + ret = xmit_check_hhlen(skb, hh_len); if (unlikely(ret)) return ret;

From: Francesco Ruggeri fruggeri@arista.com

[ Upstream commit 5b0b9e4c2c895227c8852488b3f09839233bba54 ]

In tcp_create_openreq_child we adjust tcp_header_len for md5 using the remote address in newsk. But that address is still 0 in newsk at this point, and it is only set later by the callers (tcp_v[46]_syn_recv_sock). Use the address from the request socket instead.

Fixes: cfb6eeb4c860 ("[TCP]: MD5 Signature Option (RFC2385) support.") Signed-off-by: Francesco Ruggeri fruggeri@arista.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20220421005026.686A45EC01F2@us226.sjc.aristanetwor... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_minisocks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 7c2d3ac2363a..492737d2b7d3 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -531,7 +531,7 @@ struct sock *tcp_create_openreq_child(const struct sock *sk, newtp->tsoffset = treq->ts_off; #ifdef CONFIG_TCP_MD5SIG newtp->md5sig_info = NULL; /*XXX*/ - if (newtp->af_specific->md5_lookup(sk, newsk)) + if (treq->af_specific->req_md5_lookup(sk, req_to_sk(req))) newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED; #endif if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)

From: Pengcheng Yang yangpc@wangsu.com

[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ]

If an ACK (s)acks multiple skbs, we favor the information from the most recently sent skb by choosing the skb with the highest prior_delivered count. But in the interval between receiving ACKs, we send multiple skbs with the same prior_delivered, because the tp->delivered only changes when we receive an ACK.

We used RACK's solution, copying tcp_rack_sent_after() as tcp_skb_sent_after() helper to determine "which packet was sent last?". Later, we will use tcp_skb_sent_after() instead in RACK.

Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Pengcheng Yang yangpc@wangsu.com Cc: Paolo Abeni pabeni@redhat.com Acked-by: Neal Cardwell ncardwell@google.com Tested-by: Neal Cardwell ncardwell@google.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.co... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/tcp.h | 6 ++++++ net/ipv4/tcp_rate.c | 11 ++++++++--- 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h index b9fc978fb2ca..9f459e8f1689 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1042,6 +1042,7 @@ struct rate_sample { int losses; /* number of packets marked lost upon ACK */ u32 acked_sacked; /* number of packets newly (S)ACKed upon ACK */ u32 prior_in_flight; /* in flight before this ACK */ + u32 last_end_seq; /* end_seq of most recently ACKed packet */ bool is_app_limited; /* is sample from packet with bubble in pipe? */ bool is_retrans; /* is sample from retransmission? */ bool is_ack_delayed; /* is this (likely) a delayed ACK? */ @@ -1164,6 +1165,11 @@ void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost, bool is_sack_reneg, struct rate_sample *rs); void tcp_rate_check_app_limited(struct sock *sk);

+static inline bool tcp_skb_sent_after(u64 t1, u64 t2, u32 seq1, u32 seq2) +{ + return t1 > t2 || (t1 == t2 && after(seq1, seq2)); +} + /* These functions determine how the current flow behaves in respect of SACK * handling. SACK is negotiated with the peer, and therefore it can vary * between different flows. diff --git a/net/ipv4/tcp_rate.c b/net/ipv4/tcp_rate.c index fbab921670cc..9a8e014d9b5b 100644 --- a/net/ipv4/tcp_rate.c +++ b/net/ipv4/tcp_rate.c @@ -74,27 +74,32 @@ void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb) * * If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is * called multiple times. We favor the information from the most recently - * sent skb, i.e., the skb with the highest prior_delivered count. + * sent skb, i.e., the skb with the most recently sent time and the highest + * sequence. */ void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb, struct rate_sample *rs) { struct tcp_sock *tp = tcp_sk(sk); struct tcp_skb_cb *scb = TCP_SKB_CB(skb); + u64 tx_tstamp;

if (!scb->tx.delivered_mstamp) return;

+ tx_tstamp = tcp_skb_timestamp_us(skb); if (!rs->prior_delivered || - after(scb->tx.delivered, rs->prior_delivered)) { + tcp_skb_sent_after(tx_tstamp, tp->first_tx_mstamp, + scb->end_seq, rs->last_end_seq)) { rs->prior_delivered_ce = scb->tx.delivered_ce; rs->prior_delivered = scb->tx.delivered; rs->prior_mstamp = scb->tx.delivered_mstamp; rs->is_app_limited = scb->tx.is_app_limited; rs->is_retrans = scb->sacked & TCPCB_RETRANS; + rs->last_end_seq = scb->end_seq;

/* Record send time of most recently ACKed packet: */ - tp->first_tx_mstamp = tcp_skb_timestamp_us(skb); + tp->first_tx_mstamp = tx_tstamp; /* Find the duration of the "send phase" of this window: */ rs->interval_us = tcp_stamp_us_delta(tp->first_tx_mstamp, scb->tx.first_tx_mstamp);

From: Xin Long lucien.xin@gmail.com

[ Upstream commit 165e3e17fe8fe6a8aab319bc6e631a2e23b9a857 ]

A null pointer reference issue can be triggered when the response of a stream reconf request arrives after the timer is triggered, such as:

send Incoming SSN Reset Request ---> CPU0: reconf timer is triggered, go to the handler code before hold sk lock <--- reply with Outgoing SSN Reset Request CPU1: process Outgoing SSN Reset Request, and set asoc->strreset_chunk to NULL CPU0: continue the handler code, hold sk lock, and try to hold asoc->strreset_chunk, crash!

In Ying Xu's testing, the call trace is:

[ ] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ ] RIP: 0010:sctp_chunk_hold+0xe/0x40 [sctp] [ ] Call Trace: [ ] <IRQ> [ ] sctp_sf_send_reconf+0x2c/0x100 [sctp] [ ] sctp_do_sm+0xa4/0x220 [sctp] [ ] sctp_generate_reconf_event+0xbd/0xe0 [sctp] [ ] call_timer_fn+0x26/0x130

This patch is to fix it by returning from the timer handler if asoc strreset_chunk is already set to NULL.

Fixes: 7b9438de0cd4 ("sctp: add stream reconf timer") Reported-by: Ying Xu yinxu@redhat.com Signed-off-by: Xin Long lucien.xin@gmail.com Acked-by: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sctp/sm_sideeffect.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index b3815b568e8e..463c4a58d2c3 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -458,6 +458,10 @@ void sctp_generate_reconf_event(struct timer_list *t) goto out_unlock; }

+ /* This happens when the response arrives after the timer is triggered. */ + if (!asoc->strreset_chunk) + goto out_unlock; + error = sctp_do_sm(net, SCTP_EVENT_T_TIMEOUT, SCTP_ST_TIMEOUT(SCTP_EVENT_TIMEOUT_RECONF), asoc->state, asoc->ep, asoc,

From: Fabio Estevam festevam@denx.de

[ Upstream commit 0310b5aa0656a94102344f1e9ae2892e342a665d ]

The ROHM BD71847 PMIC has a 32.768 kHz clock.

Describe the PMIC clock to fix the following boot errors:

bd718xx-clk bd71847-clk.1.auto: No parent clk found bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22

Based on the same fix done for imx8mm-evk as per commit a6a355ede574 ("arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC")

Fixes: 3e44dd09736d ("arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support") Signed-off-by: Fabio Estevam festevam@denx.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 7dfee715a2c4..d8ce217c6016 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -59,6 +59,10 @@ pmic@4b { interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered;

+ #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + regulators { buck1_reg: BUCK1 { regulator-name = "buck1";

From: Xiaobing Luo luoxiaobing0926@gmail.com

[ Upstream commit 1aa24a8f3b5133dae4bc1e57427e345445f3e902 ]

-------------------------------------------- unreferenced object 0xffff000010742a00 (size 128): comm "swapper/0", pid 1, jiffies 4294902015 (age 1187.652s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000b4dfebaa>] __kmalloc+0x338/0x474 [<00000000d6e716db>] sun50i_cpufreq_nvmem_probe+0xc4/0x36c [<000000007d6082a0>] platform_probe+0x98/0x11c [<00000000c990f549>] really_probe+0x234/0x5a0 [<000000002d9fecc6>] __driver_probe_device+0x194/0x224 [<00000000cf0b94fa>] driver_probe_device+0x64/0x13c [<00000000f238e4cf>] __device_attach_driver+0xf8/0x180 [<000000006720e418>] bus_for_each_drv+0xf8/0x160 [<00000000df4f14f6>] __device_attach+0x174/0x29c [<00000000782002fb>] device_initial_probe+0x20/0x30 [<00000000c2681b06>] bus_probe_device+0xfc/0x110 [<00000000964cf3bd>] device_add+0x5f0/0xcd0 [<000000004b9264e3>] platform_device_add+0x198/0x390 [<00000000fa82a9d0>] platform_device_register_full+0x178/0x210 [<000000009a5daf13>] sun50i_cpufreq_init+0xf8/0x168 [<000000000377cc7c>] do_one_initcall+0xe4/0x570 --------------------------------------------

if sun50i_cpufreq_get_efuse failed, then opp_tables leak.

Fixes: f328584f7bff ("cpufreq: Add sun50i nvmem based CPU scaling driver") Signed-off-by: Xiaobing Luo luoxiaobing0926@gmail.com Reviewed-by: Samuel Holland samuel@sholland.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpufreq/sun50i-cpufreq-nvmem.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c index 2deed8d8773f..75e1bf3a08f7 100644 --- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c +++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c @@ -98,8 +98,10 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev) return -ENOMEM;

ret = sun50i_cpufreq_get_efuse(&speed); - if (ret) + if (ret) { + kfree(opp_tables); return ret; + }

snprintf(name, MAX_NAME_LEN, "speed%d", speed);

From: Peng Li lipeng321@huawei.com

[ Upstream commit 123521b6b260d901937d3fb598ab88d260c857a6 ]

The comments in function hclge_comm_tqps_update_stats is not right, so fix it.

Fixes: 287db5c40d15 ("net: hns3: create new set of common tqp stats APIs for PF and VF reuse") Signed-off-by: Peng Li lipeng321@huawei.com Signed-off-by: Guangbin Huang huangguangbin2@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c index 0c60f41fca8a..f3c9395d8351 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_common/hclge_comm_tqp_stats.c @@ -75,7 +75,7 @@ int hclge_comm_tqps_update_stats(struct hnae3_handle *handle, ret = hclge_comm_cmd_send(hw, &desc, 1); if (ret) { dev_err(&hw->cmq.csq.pdev->dev, - "failed to get tqp stat, ret = %d, tx = %u.\n", + "failed to get tqp stat, ret = %d, rx = %u.\n", ret, i); return ret; } @@ -89,7 +89,7 @@ int hclge_comm_tqps_update_stats(struct hnae3_handle *handle, ret = hclge_comm_cmd_send(hw, &desc, 1); if (ret) { dev_err(&hw->cmq.csq.pdev->dev, - "failed to get tqp stat, ret = %d, rx = %u.\n", + "failed to get tqp stat, ret = %d, tx = %u.\n", ret, i); return ret; }

From: Jian Shen shenjian15@huawei.com

[ Upstream commit 7d413735cb18ff73aaba3457b16b08332e8d3cc4 ]

Add validity check for message data length in function hclge_send_mbx_msg(), avoid unexpected overflow.

Fixes: dde1a86e93ca ("net: hns3: Add mailbox support to PF driver") Signed-off-by: Jian Shen shenjian15@huawei.com Signed-off-by: Guangbin Huang huangguangbin2@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c index 36cbafc5f944..53f939923c28 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c @@ -94,6 +94,13 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len, enum hclge_comm_cmd_status status; struct hclge_desc desc;

+ if (msg_len > HCLGE_MBX_MAX_MSG_SIZE) { + dev_err(&hdev->pdev->dev, + "msg data length(=%u) exceeds maximum(=%u)\n", + msg_len, HCLGE_MBX_MAX_MSG_SIZE); + return -EMSGSIZE; + } + resp_pf_to_vf = (struct hclge_mbx_pf_to_vf_cmd *)desc.data;

hclge_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_PF_TO_VF, false);

From: liuyacan liuyacan@corp.netease.com

[ Upstream commit 4e2e65e2e56c6ceb4ea1719360080c0af083229e ]

In the current implementation, when TCP initiates a connection to an unavailable [ip,port], ECONNREFUSED will be stored in the TCP socket, but SMC will not. However, some apps (like curl) use getsockopt(,,SO_ERROR,,) to get the error information, which makes them miss the error message and behave strangely.

Fixes: 50717a37db03 ("net/smc: nonblocking connect rework") Signed-off-by: liuyacan liuyacan@corp.netease.com Reviewed-by: Tony Lu tonylu@linux.alibaba.com Acked-by: Karsten Graul kgraul@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/smc/af_smc.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 68cd110722a4..fd9d9cfd0f3d 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1357,6 +1357,8 @@ static void smc_connect_work(struct work_struct *work) smc->sk.sk_state = SMC_CLOSED; if (rc == -EPIPE || rc == -EAGAIN) smc->sk.sk_err = EPIPE; + else if (rc == -ECONNREFUSED) + smc->sk.sk_err = ECONNREFUSED; else if (signal_pending(current)) smc->sk.sk_err = -sock_intr_errno(timeo); sock_put(&smc->sk); /* passive closing */

From: Peilin Ye peilin.ye@bytedance.com

[ Upstream commit ff827beb706ed719c766acf36449801ded0c17fc ]

For GRE and GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it.

It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see gre_fb_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Peilin Ye peilin.ye@bytedance.com Acked-by: William Tu u9012063@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/ip_gre.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 99db2e41ed10..ca70b92e80d9 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -459,14 +459,12 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev, __be16 proto) { struct ip_tunnel *tunnel = netdev_priv(dev); - - if (tunnel->parms.o_flags & TUNNEL_SEQ) - tunnel->o_seqno++; + __be16 flags = tunnel->parms.o_flags;

/* Push GRE header. */ gre_build_header(skb, tunnel->tun_hlen, - tunnel->parms.o_flags, proto, tunnel->parms.o_key, - htonl(tunnel->o_seqno)); + flags, proto, tunnel->parms.o_key, + (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);

ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol); }

From: Peilin Ye peilin.ye@bytedance.com

[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ]

As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events:

1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's:

gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^

Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t.

As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on.

Maybe a better fix would be:

1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq".

Unfortunately, that would break userspace.

We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal.

Suggested-by: Jakub Kicinski kuba@kernel.org Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye peilin.ye@bytedance.com Acked-by: William Tu u9012063@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/ip6_tunnel.h | 2 +- include/net/ip_tunnels.h | 2 +- net/ipv4/ip_gre.c | 6 +++--- net/ipv6/ip6_gre.c | 7 ++++--- 4 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index a38c4f1e4e5c..74b369bddf49 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -58,7 +58,7 @@ struct ip6_tnl {

/* These fields used only by GRE */ __u32 i_seqno; /* The last seen seqno */ - __u32 o_seqno; /* The last output seqno */ + atomic_t o_seqno; /* The last output seqno */ int hlen; /* tun_hlen + encap_hlen */ int tun_hlen; /* Precalculated header length */ int encap_hlen; /* Encap header length (FOU,GUE) */ diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 0219fe907b26..3ec6146f8734 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -116,7 +116,7 @@ struct ip_tunnel {

/* These four fields used only by GRE */ u32 i_seqno; /* The last seen seqno */ - u32 o_seqno; /* The last output seqno */ + atomic_t o_seqno; /* The last output seqno */ int tun_hlen; /* Precalculated header length */

/* These four fields used only by ERSPAN */ diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index ca70b92e80d9..8cf86e42c1d1 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -464,7 +464,7 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev, /* Push GRE header. */ gre_build_header(skb, tunnel->tun_hlen, flags, proto, tunnel->parms.o_key, - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0);

ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol); } @@ -502,7 +502,7 @@ static void gre_fb_xmit(struct sk_buff *skb, struct net_device *dev, (TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ); gre_build_header(skb, tunnel_hlen, flags, proto, tunnel_id_to_key32(tun_info->key.tun_id), - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0);

ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen);

@@ -579,7 +579,7 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev) }

gre_build_header(skb, 8, TUNNEL_SEQ, - proto, 0, htonl(tunnel->o_seqno++)); + proto, 0, htonl(atomic_fetch_inc(&tunnel->o_seqno)));

ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen);

diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index d9e4ac94eab4..5136959b3dc5 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -766,7 +766,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0);

} else { @@ -777,7 +777,8 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,

gre_build_header(skb, tunnel->tun_hlen, flags, protocol, tunnel->parms.o_key, - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) + : 0); }

return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu, @@ -1055,7 +1056,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, /* Push GRE header. */ proto = (t->parms.erspan_ver == 1) ? htons(ETH_P_ERSPAN) : htons(ETH_P_ERSPAN2); - gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(t->o_seqno++)); + gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(atomic_fetch_inc(&t->o_seqno)));

/* TooBig packet may have updated dst->dev's mtu */ if (!t->parms.collect_md && dst && dst_mtu(dst) > dst->dev->mtu)

From: Eric Dumazet edumazet@google.com

[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ]

syzbot complained about a recent change in TCP stack, hitting a NULL pointer [1]

tcp request sockets have an af_specific pointer, which was used before the blamed change only for SYNACK generation in non SYNCOOKIE mode.

tcp requests sockets momentarily created when third packet coming from client in SYNCOOKIE mode were not using treq->af_specific.

Make sure this field is populated, in the same way normal TCP requests sockets do in tcp_conn_request().

[1] TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534 Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48 RSP: 0018:ffffc90000de0588 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100 RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008 RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0 R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline] tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413 napi_poll net/core/dev.c:6480 [inline] net_rx_action+0x8ec/0xc60 net/core/dev.c:6567 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097

Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Francesco Ruggeri fruggeri@arista.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/tcp.h | 1 + net/ipv4/syncookies.c | 8 +++++++- net/ipv6/syncookies.c | 3 ++- 3 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h index 40c05972178b..a3fe2f9bc01c 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -480,6 +480,7 @@ int __cookie_v4_check(const struct iphdr *iph, const struct tcphdr *th, u32 cookie); struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb); struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops, + const struct tcp_request_sock_ops *af_ops, struct sock *sk, struct sk_buff *skb); #ifdef CONFIG_SYN_COOKIES

diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c index 2cb3b852d148..f33c31dd7366 100644 --- a/net/ipv4/syncookies.c +++ b/net/ipv4/syncookies.c @@ -281,6 +281,7 @@ bool cookie_ecn_ok(const struct tcp_options_received *tcp_opt, EXPORT_SYMBOL(cookie_ecn_ok);

struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops, + const struct tcp_request_sock_ops *af_ops, struct sock *sk, struct sk_buff *skb) { @@ -297,6 +298,10 @@ struct request_sock *cookie_tcp_reqsk_alloc(const struct request_sock_ops *ops, return NULL;

treq = tcp_rsk(req); + + /* treq->af_specific might be used to perform TCP_MD5 lookup */ + treq->af_specific = af_ops; + treq->syn_tos = TCP_SKB_CB(skb)->ip_dsfield; #if IS_ENABLED(CONFIG_MPTCP) treq->is_mptcp = sk_is_mptcp(sk); @@ -364,7 +369,8 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb) goto out;

ret = NULL; - req = cookie_tcp_reqsk_alloc(&tcp_request_sock_ops, sk, skb); + req = cookie_tcp_reqsk_alloc(&tcp_request_sock_ops, + &tcp_request_sock_ipv4_ops, sk, skb); if (!req) goto out;

diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index d1b61d00368e..9cc123f000fb 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -170,7 +170,8 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) goto out;

ret = NULL; - req = cookie_tcp_reqsk_alloc(&tcp6_request_sock_ops, sk, skb); + req = cookie_tcp_reqsk_alloc(&tcp6_request_sock_ops, + &tcp_request_sock_ipv6_ops, sk, skb); if (!req) goto out;

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit f58ca215cda1975f77b2b762903684a3c101bec9 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

Fixes: 7a6fca879f59 ("clk: sunxi: Add driver for A80 MMC config clocks/resets") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: Samuel Holland samuel@sholland.org Signed-off-by: Jernej Skrabec jernej.skrabec@gmail.com Link: https://lore.kernel.org/r/20220421134308.2885094-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/sunxi/clk-sun9i-mmc.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c index 542b31d6e96d..636bcf2439ef 100644 --- a/drivers/clk/sunxi/clk-sun9i-mmc.c +++ b/drivers/clk/sunxi/clk-sun9i-mmc.c @@ -109,6 +109,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev) spin_lock_init(&data->lock);

r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) + return -EINVAL; /* one clock/reset pair per word */ count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH); data->membase = devm_ioremap_resource(&pdev->dev, r);

From: Lin Ma linma@zju.edu.cn

[ Upstream commit b561275d633bcd8e0e8055ab86f1a13df75a0269 ]

The function mctp_unregister() reclaims the device's relevant resource when a netcard detaches. However, a running routine may be unaware of this and cause the use-after-free of the mdev->addrs object.

The race condition can be demonstrated below

cleanup thread another thread | unregister_netdev() | mctp_sendmsg() ... | ... mctp_unregister() | rt = mctp_route_lookup() ... | mctl_local_output() kfree(mdev->addrs) | ... | saddr = rt->dev->addrs[0]; |

An attacker can adopt the (recent provided) mtcpserial driver with pty to fake the device detaching and use the userfaultfd to increase the race success chance (in mctp_sendmsg). The KASan report for such a POC is shown below:

[ 86.051955] ================================================================== [ 86.051955] BUG: KASAN: use-after-free in mctp_local_output+0x4e9/0xb7d [ 86.051955] Read of size 1 at addr ffff888005f298c0 by task poc/295 [ 86.051955] [ 86.051955] Call Trace: [ 86.051955] <TASK> [ 86.051955] dump_stack_lvl+0x33/0x42 [ 86.051955] print_report.cold.13+0xb2/0x6b3 [ 86.051955] ? preempt_schedule_irq+0x57/0x80 [ 86.051955] ? mctp_local_output+0x4e9/0xb7d [ 86.051955] kasan_report+0xa5/0x120 [ 86.051955] ? mctp_local_output+0x4e9/0xb7d [ 86.051955] mctp_local_output+0x4e9/0xb7d [ 86.051955] ? mctp_dev_set_key+0x79/0x79 [ 86.051955] ? copyin+0x38/0x50 [ 86.051955] ? _copy_from_iter+0x1b6/0xf20 [ 86.051955] ? sysvec_apic_timer_interrupt+0x97/0xb0 [ 86.051955] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 86.051955] ? mctp_local_output+0x1/0xb7d [ 86.051955] mctp_sendmsg+0x64d/0xdb0 [ 86.051955] ? mctp_sk_close+0x20/0x20 [ 86.051955] ? __fget_light+0x2fd/0x4f0 [ 86.051955] ? mctp_sk_close+0x20/0x20 [ 86.051955] sock_sendmsg+0xdd/0x110 [ 86.051955] __sys_sendto+0x1cc/0x2a0 [ 86.051955] ? __ia32_sys_getpeername+0xa0/0xa0 [ 86.051955] ? new_sync_write+0x335/0x550 [ 86.051955] ? alloc_file+0x22f/0x500 [ 86.051955] ? __ip_do_redirect+0x820/0x1820 [ 86.051955] ? vfs_write+0x44d/0x7b0 [ 86.051955] ? vfs_write+0x44d/0x7b0 [ 86.051955] ? fput_many+0x15/0x120 [ 86.051955] ? ksys_write+0x155/0x1b0 [ 86.051955] ? __ia32_sys_read+0xa0/0xa0 [ 86.051955] __x64_sys_sendto+0xd8/0x1b0 [ 86.051955] ? exit_to_user_mode_prepare+0x2f/0x120 [ 86.051955] ? syscall_exit_to_user_mode+0x12/0x20 [ 86.051955] do_syscall_64+0x3a/0x80 [ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 86.051955] RIP: 0033:0x7f82118a56b3 [ 86.051955] RSP: 002b:00007ffdb154b110 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 86.051955] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f82118a56b3 [ 86.051955] RDX: 0000000000000010 RSI: 00007f8211cd4000 RDI: 0000000000000007 [ 86.051955] RBP: 00007ffdb154c1d0 R08: 00007ffdb154b164 R09: 000000000000000c [ 86.051955] R10: 0000000000000000 R11: 0000000000000293 R12: 000055d779800db0 [ 86.051955] R13: 00007ffdb154c2b0 R14: 0000000000000000 R15: 0000000000000000 [ 86.051955] </TASK> [ 86.051955] [ 86.051955] Allocated by task 295: [ 86.051955] kasan_save_stack+0x1c/0x40 [ 86.051955] __kasan_kmalloc+0x84/0xa0 [ 86.051955] mctp_rtm_newaddr+0x242/0x610 [ 86.051955] rtnetlink_rcv_msg+0x2fd/0x8b0 [ 86.051955] netlink_rcv_skb+0x11c/0x340 [ 86.051955] netlink_unicast+0x439/0x630 [ 86.051955] netlink_sendmsg+0x752/0xc00 [ 86.051955] sock_sendmsg+0xdd/0x110 [ 86.051955] __sys_sendto+0x1cc/0x2a0 [ 86.051955] __x64_sys_sendto+0xd8/0x1b0 [ 86.051955] do_syscall_64+0x3a/0x80 [ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 86.051955] [ 86.051955] Freed by task 301: [ 86.051955] kasan_save_stack+0x1c/0x40 [ 86.051955] kasan_set_track+0x21/0x30 [ 86.051955] kasan_set_free_info+0x20/0x30 [ 86.051955] __kasan_slab_free+0x104/0x170 [ 86.051955] kfree+0x8c/0x290 [ 86.051955] mctp_dev_notify+0x161/0x2c0 [ 86.051955] raw_notifier_call_chain+0x8b/0xc0 [ 86.051955] unregister_netdevice_many+0x299/0x1180 [ 86.051955] unregister_netdevice_queue+0x210/0x2f0 [ 86.051955] unregister_netdev+0x13/0x20 [ 86.051955] mctp_serial_close+0x6d/0xa0 [ 86.051955] tty_ldisc_kill+0x31/0xa0 [ 86.051955] tty_ldisc_hangup+0x24f/0x560 [ 86.051955] __tty_hangup.part.28+0x2ce/0x6b0 [ 86.051955] tty_release+0x327/0xc70 [ 86.051955] __fput+0x1df/0x8b0 [ 86.051955] task_work_run+0xca/0x150 [ 86.051955] exit_to_user_mode_prepare+0x114/0x120 [ 86.051955] syscall_exit_to_user_mode+0x12/0x20 [ 86.051955] do_syscall_64+0x46/0x80 [ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 86.051955] [ 86.051955] The buggy address belongs to the object at ffff888005f298c0 [ 86.051955] which belongs to the cache kmalloc-8 of size 8 [ 86.051955] The buggy address is located 0 bytes inside of [ 86.051955] 8-byte region [ffff888005f298c0, ffff888005f298c8) [ 86.051955] [ 86.051955] The buggy address belongs to the physical page: [ 86.051955] flags: 0x100000000000200(slab|node=0|zone=1) [ 86.051955] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888005c42280 [ 86.051955] raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000 [ 86.051955] page dumped because: kasan: bad access detected [ 86.051955] [ 86.051955] Memory state around the buggy address: [ 86.051955] ffff888005f29780: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 [ 86.051955] ffff888005f29800: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc [ 86.051955] >ffff888005f29880: fc fc fc fb fc fc fc fc fa fc fc fc fc fa fc fc [ 86.051955] ^ [ 86.051955] ffff888005f29900: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc [ 86.051955] ffff888005f29980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc [ 86.051955] ==================================================================

To this end, just like the commit e04480920d1e ("Bluetooth: defer cleanup of resources in hci_unregister_dev()") this patch defers the destructive kfree(mdev->addrs) in mctp_unregister to the mctp_dev_put, where the refcount of mdev is zero and the entire device is reclaimed. This prevents the use-after-free because the sendmsg thread holds the reference of mdev in the mctp_route object.

Fixes: 583be982d934 (mctp: Add device handling and netlink interface) Signed-off-by: Lin Ma linma@zju.edu.cn Acked-by: Jeremy Kerr jk@codeconstruct.com.au Link: https://lore.kernel.org/r/20220422114340.32346-1-linma@zju.edu.cn Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mctp/device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mctp/device.c b/net/mctp/device.c index f86ef6d751bd..9150b9789d25 100644 --- a/net/mctp/device.c +++ b/net/mctp/device.c @@ -312,6 +312,7 @@ void mctp_dev_hold(struct mctp_dev *mdev) void mctp_dev_put(struct mctp_dev *mdev) { if (mdev && refcount_dec_and_test(&mdev->refs)) { + kfree(mdev->addrs); dev_put(mdev->dev); kfree_rcu(mdev, rcu); } @@ -440,7 +441,6 @@ static void mctp_unregister(struct net_device *dev)

mctp_route_remove_dev(mdev); mctp_neigh_remove_dev(mdev); - kfree(mdev->addrs);

mctp_dev_put(mdev); }

From: Baruch Siach baruch.siach@siklu.com

[ Upstream commit 0ed9704b660b259b54743cad8a84a11148f60f0a ]

Return back the error value that we get from phy_read_mmd().

Fixes: c84786fa8f91 ("net: phy: marvell10g: read copper results from CSSR1") Signed-off-by: Baruch Siach baruch.siach@siklu.com Reviewed-by: Marek Behún kabel@kernel.org Reviewed-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Link: https://lore.kernel.org/r/f47cb031aeae873bb008ba35001607304a171a20.165086805... Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/marvell10g.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index b6fea119fe13..2b7d0720720b 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -880,7 +880,7 @@ static int mv3310_read_status_copper(struct phy_device *phydev)

cssr1 = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_CSSR1); if (cssr1 < 0) - return val; + return cssr1;

/* If the link settings are not resolved, mark the link down */ if (!(cssr1 & MV_PCS_CSSR1_RESOLVED)) {

From: Samuel Holland samuel@sholland.org

[ Upstream commit dc3ae06c5f2170d879ff58696f629d8c3868aec3 ]

commit b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") added a platform device notifier that sets the DMA offset for all of the display engine frontend and backend devices.

The code applying the offset to DMA buffer physical addresses was then removed from the backend driver in commit 756668ba682e ("drm/sun4i: backend: Remove the MBUS quirks"), but the code subtracting PHYS_OFFSET was left in the frontend driver.

As a result, the offset was applied twice in the frontend driver. This likely went unnoticed because it only affects specific configurations (scaling or certain pixel formats) where the frontend is used, on boards with both one of these older SoCs and more than 1 GB of DRAM.

In addition, the references to PHYS_OFFSET prevent compiling the driver on architectures where PHYS_OFFSET is not defined.

Fixes: b4bdc4fbf8d0 ("soc: sunxi: Deal with the MBUS DMA offsets in a central place") Reviewed-by: Jernej Skrabec jernej.skrabec@gmail.com Signed-off-by: Samuel Holland samuel@sholland.org Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-4-samuel@... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/sun4i/sun4i_frontend.c | 3 --- 1 file changed, 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_frontend.c b/drivers/gpu/drm/sun4i/sun4i_frontend.c index 56ae38389db0..462fae73eae9 100644 --- a/drivers/gpu/drm/sun4i/sun4i_frontend.c +++ b/drivers/gpu/drm/sun4i/sun4i_frontend.c @@ -222,13 +222,11 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,

/* Set the physical address of the buffer in memory */ paddr = drm_fb_cma_get_gem_addr(fb, state, 0); - paddr -= PHYS_OFFSET; DRM_DEBUG_DRIVER("Setting buffer #0 address to %pad\n", &paddr); regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR0_REG, paddr);

if (fb->format->num_planes > 1) { paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 2 : 1); - paddr -= PHYS_OFFSET; DRM_DEBUG_DRIVER("Setting buffer #1 address to %pad\n", &paddr); regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR1_REG, paddr); @@ -236,7 +234,6 @@ void sun4i_frontend_update_buffer(struct sun4i_frontend *frontend,

if (fb->format->num_planes > 2) { paddr = drm_fb_cma_get_gem_addr(fb, state, swap ? 1 : 2); - paddr -= PHYS_OFFSET; DRM_DEBUG_DRIVER("Setting buffer #2 address to %pad\n", &paddr); regmap_write(frontend->regs, SUN4I_FRONTEND_BUF_ADDR2_REG, paddr);

From: Luiz Augusto von Dentz luiz.von.dentz@intel.com

[ Upstream commit c86cc5a3ec70f5644f1fa21610b943d0441bc1f7 ]

Commit d5ebaa7c5f6f6 introduces checks for handle range (e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem to respect the valid range int case of error status:

HCI Event: Connect Complete (0x03) plen 11

Status: Page Timeout (0x04) Handle: 65535 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) Link type: ACL (0x01) Encryption: Disabled (0x00) [1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle

Because of it is impossible to cleanup the connections properly since the stack would attempt to cancel the connection which is no longer in progress causing the following trace:

< HCI Command: Create Connection Cancel (0x01|0x0008) plen 6 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) = bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Connection timed out

HCI Event: Command Complete (0x0e) plen 10

Create Connection Cancel (0x01|0x0008) ncmd 1 Status: Unknown Connection Identifier (0x02) Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) < HCI Command: Create Connection Cancel (0x01|0x0008) plen 6 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc)

Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events") Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/bluetooth/hci.h | 1 + net/bluetooth/hci_event.c | 65 ++++++++++++++++++++----------------- 2 files changed, 37 insertions(+), 29 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 5cb095b09a94..69ef31cea582 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -578,6 +578,7 @@ enum { #define HCI_ERROR_CONNECTION_TIMEOUT 0x08 #define HCI_ERROR_REJ_LIMITED_RESOURCES 0x0d #define HCI_ERROR_REJ_BAD_ADDR 0x0f +#define HCI_ERROR_INVALID_PARAMETERS 0x12 #define HCI_ERROR_REMOTE_USER_TERM 0x13 #define HCI_ERROR_REMOTE_LOW_RESOURCES 0x14 #define HCI_ERROR_REMOTE_POWER_OFF 0x15 diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index d984777c9b58..33a1b4115194 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -3067,13 +3067,9 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data, { struct hci_ev_conn_complete *ev = data; struct hci_conn *conn; + u8 status = ev->status;

- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) { - bt_dev_err(hdev, "Ignoring HCI_Connection_Complete for invalid handle"); - return; - } - - bt_dev_dbg(hdev, "status 0x%2.2x", ev->status); + bt_dev_dbg(hdev, "status 0x%2.2x", status);

hci_dev_lock(hdev);

@@ -3122,8 +3118,14 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data, goto unlock; }

- if (!ev->status) { + if (!status) { conn->handle = __le16_to_cpu(ev->handle); + if (conn->handle > HCI_CONN_HANDLE_MAX) { + bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x", + conn->handle, HCI_CONN_HANDLE_MAX); + status = HCI_ERROR_INVALID_PARAMETERS; + goto done; + }

if (conn->type == ACL_LINK) { conn->state = BT_CONFIG; @@ -3164,18 +3166,18 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data, hci_send_cmd(hdev, HCI_OP_CHANGE_CONN_PTYPE, sizeof(cp), &cp); } - } else { - conn->state = BT_CLOSED; - if (conn->type == ACL_LINK) - mgmt_connect_failed(hdev, &conn->dst, conn->type, - conn->dst_type, ev->status); }

if (conn->type == ACL_LINK) hci_sco_setup(conn, ev->status);

- if (ev->status) { - hci_connect_cfm(conn, ev->status); +done: + if (status) { + conn->state = BT_CLOSED; + if (conn->type == ACL_LINK) + mgmt_connect_failed(hdev, &conn->dst, conn->type, + conn->dst_type, status); + hci_connect_cfm(conn, status); hci_conn_del(conn); } else if (ev->link_type == SCO_LINK) { switch (conn->setting & SCO_AIRMODE_MASK) { @@ -3185,7 +3187,7 @@ static void hci_conn_complete_evt(struct hci_dev *hdev, void *data, break; }

- hci_connect_cfm(conn, ev->status); + hci_connect_cfm(conn, status); }

unlock: @@ -4676,6 +4678,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data, { struct hci_ev_sync_conn_complete *ev = data; struct hci_conn *conn; + u8 status = ev->status;

switch (ev->link_type) { case SCO_LINK: @@ -4690,12 +4693,7 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data, return; }

- if (__le16_to_cpu(ev->handle) > HCI_CONN_HANDLE_MAX) { - bt_dev_err(hdev, "Ignoring HCI_Sync_Conn_Complete for invalid handle"); - return; - } - - bt_dev_dbg(hdev, "status 0x%2.2x", ev->status); + bt_dev_dbg(hdev, "status 0x%2.2x", status);

hci_dev_lock(hdev);

@@ -4729,9 +4727,17 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data, goto unlock; }

- switch (ev->status) { + switch (status) { case 0x00: conn->handle = __le16_to_cpu(ev->handle); + if (conn->handle > HCI_CONN_HANDLE_MAX) { + bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x", + conn->handle, HCI_CONN_HANDLE_MAX); + status = HCI_ERROR_INVALID_PARAMETERS; + conn->state = BT_CLOSED; + break; + } + conn->state = BT_CONNECTED; conn->type = ev->link_type;

@@ -4775,8 +4781,8 @@ static void hci_sync_conn_complete_evt(struct hci_dev *hdev, void *data, } }

- hci_connect_cfm(conn, ev->status); - if (ev->status) + hci_connect_cfm(conn, status); + if (status) hci_conn_del(conn);

unlock: @@ -5527,11 +5533,6 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status, struct smp_irk *irk; u8 addr_type;

- if (handle > HCI_CONN_HANDLE_MAX) { - bt_dev_err(hdev, "Ignoring HCI_LE_Connection_Complete for invalid handle"); - return; - } - hci_dev_lock(hdev);

/* All controllers implicitly stop advertising in the event of a @@ -5603,6 +5604,12 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,

conn->dst_type = ev_bdaddr_type(hdev, conn->dst_type, NULL);

+ if (handle > HCI_CONN_HANDLE_MAX) { + bt_dev_err(hdev, "Invalid handle: 0x%4.4x > 0x%4.4x", handle, + HCI_CONN_HANDLE_MAX); + status = HCI_ERROR_INVALID_PARAMETERS; + } + if (status) { hci_le_conn_failed(conn, status); goto unlock;

From: Jens Axboe axboe@kernel.dk

[ Upstream commit 588faa1ea5eecb351100ee5d187b9be99210f70d ]

We should check unused fields for non-zero and -EINVAL if they are set, making it consistent with other opcodes.

Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()") Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/io_uring.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/fs/io_uring.c b/fs/io_uring.c index fbba8342172a..107bce75131e 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -4890,6 +4890,8 @@ static int io_sendmsg_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)

if (unlikely(req->ctx->flags & IORING_SETUP_IOPOLL)) return -EINVAL; + if (unlikely(sqe->addr2 || sqe->file_index)) + return -EINVAL;

sr->umsg = u64_to_user_ptr(READ_ONCE(sqe->addr)); sr->len = READ_ONCE(sqe->len);

From: Florian Westphal fw@strlen.de

[ Upstream commit c7aab4f17021b636a0ee75bcf28e06fb7c94ab48 ]

Jaco Kroon reported tcp problems that Eric Dumazet and Neal Cardwell pinpointed to nf_conntrack tcp_in_window() bug.

tcp trace shows following sequence:

I > R Flags [S], seq 3451342529, win 62580, options [.. tfo [|tcp]> R > I Flags [S.], seq 2699962254, ack 3451342530, win 65535, options [..] R > I Flags [P.], seq 1:89, ack 1, [..]

Note 3rd ACK is from responder to initiator so following branch is taken: } else if (((state->state == TCP_CONNTRACK_SYN_SENT && dir == IP_CT_DIR_ORIGINAL) || (state->state == TCP_CONNTRACK_SYN_RECV && dir == IP_CT_DIR_REPLY)) && after(end, sender->td_end)) {

... because state == TCP_CONNTRACK_SYN_RECV and dir is REPLY. This causes the scaling factor to be reset to 0: window scale option is only present in syn(ack) packets. This in turn makes nf_conntrack mark valid packets as out-of-window.

This was always broken, it exists even in original commit where window tracking was added to ip_conntrack (nf_conntrack predecessor) in 2.6.9-rc1 kernel.

Restrict to 'tcph->syn', just like the 3rd condtional added in commit 82b72cb94666 ("netfilter: conntrack: re-init state for retransmitted syn-ack").

Upon closer look, those conditionals/branches can be merged:

Because earlier checks prevent syn-ack from showing up in original direction, the 'dir' checks in the conditional quoted above are redundant, remove them. Return early for pure syn retransmitted in reply direction (simultaneous open).

Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Jaco Kroon jaco@uls.co.za Signed-off-by: Florian Westphal fw@strlen.de Acked-by: Jozsef Kadlecsik kadlec@netfilter.org Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_proto_tcp.c | 21 ++++++--------------- 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 8ec55cd72572..204a5cdff5b1 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -556,24 +556,14 @@ static bool tcp_in_window(struct nf_conn *ct, }

} - } else if (((state->state == TCP_CONNTRACK_SYN_SENT - && dir == IP_CT_DIR_ORIGINAL) - || (state->state == TCP_CONNTRACK_SYN_RECV - && dir == IP_CT_DIR_REPLY)) - && after(end, sender->td_end)) { + } else if (tcph->syn && + after(end, sender->td_end) && + (state->state == TCP_CONNTRACK_SYN_SENT || + state->state == TCP_CONNTRACK_SYN_RECV)) { /* * RFC 793: "if a TCP is reinitialized ... then it need * not wait at all; it must only be sure to use sequence * numbers larger than those recently used." - */ - sender->td_end = - sender->td_maxend = end; - sender->td_maxwin = (win == 0 ? 1 : win); - - tcp_options(skb, dataoff, tcph, sender); - } else if (tcph->syn && dir == IP_CT_DIR_REPLY && - state->state == TCP_CONNTRACK_SYN_SENT) { - /* Retransmitted syn-ack, or syn (simultaneous open). * * Re-init state for this direction, just like for the first * syn(-ack) reply, it might differ in seq, ack or tcp options. @@ -581,7 +571,8 @@ static bool tcp_in_window(struct nf_conn *ct, tcp_init_sender(sender, receiver, skb, dataoff, tcph, end, win); - if (!tcph->ack) + + if (dir == IP_CT_DIR_REPLY && !tcph->ack) return true; }

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 4345ece8f0bcc682f1fb3b648922c9be5f7dbe6c ]

This code tests for if the obj->buffer.length is larger than the buffer but then it just does the memcpy() anyway.

Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/20220413073744.GB8812@kili Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/asus-wmi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index adab31b52f2a..399a4a345224 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -371,10 +371,14 @@ static int asus_wmi_evaluate_method_buf(u32 method_id,

switch (obj->type) { case ACPI_TYPE_BUFFER: - if (obj->buffer.length > size) + if (obj->buffer.length > size) { err = -ENOSPC; - if (obj->buffer.length == 0) + break; + } + if (obj->buffer.length == 0) { err = -ENODATA; + break; + }

memcpy(ret_buffer, obj->buffer.pointer, obj->buffer.length); break;

From: David Yat Sin david.yatsin@amd.com

[ Upstream commit 7c6b6e18c890f30965b0589b0a57645e1dbccfde ]

dqm->gws_queue_count and pdd->qpd.mapped_gws_queue need to be updated each time the queue gets evicted.

Fixes: b8020b0304c8 ("drm/amdkfd: Enable over-subscription with >1 GWS queue") Signed-off-by: David Yat Sin david.yatsin@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/amdkfd/kfd_device_queue_manager.c | 83 +++++++++---------- 1 file changed, 37 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 4b6814949aad..8d40b93747e0 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -129,19 +129,33 @@ void program_sh_mem_settings(struct device_queue_manager *dqm, }

static void increment_queue_count(struct device_queue_manager *dqm, - enum kfd_queue_type type) + struct qcm_process_device *qpd, + struct queue *q) { dqm->active_queue_count++; - if (type == KFD_QUEUE_TYPE_COMPUTE || type == KFD_QUEUE_TYPE_DIQ) + if (q->properties.type == KFD_QUEUE_TYPE_COMPUTE || + q->properties.type == KFD_QUEUE_TYPE_DIQ) dqm->active_cp_queue_count++; + + if (q->properties.is_gws) { + dqm->gws_queue_count++; + qpd->mapped_gws_queue = true; + } }

static void decrement_queue_count(struct device_queue_manager *dqm, - enum kfd_queue_type type) + struct qcm_process_device *qpd, + struct queue *q) { dqm->active_queue_count--; - if (type == KFD_QUEUE_TYPE_COMPUTE || type == KFD_QUEUE_TYPE_DIQ) + if (q->properties.type == KFD_QUEUE_TYPE_COMPUTE || + q->properties.type == KFD_QUEUE_TYPE_DIQ) dqm->active_cp_queue_count--; + + if (q->properties.is_gws) { + dqm->gws_queue_count--; + qpd->mapped_gws_queue = false; + } }

static int allocate_doorbell(struct qcm_process_device *qpd, struct queue *q) @@ -380,7 +394,7 @@ static int create_queue_nocpsch(struct device_queue_manager *dqm, list_add(&q->list, &qpd->queues_list); qpd->queue_count++; if (q->properties.is_active) - increment_queue_count(dqm, q->properties.type); + increment_queue_count(dqm, qpd, q);

/* * Unconditionally increment this counter, regardless of the queue's @@ -505,13 +519,8 @@ static int destroy_queue_nocpsch_locked(struct device_queue_manager *dqm, deallocate_vmid(dqm, qpd, q); } qpd->queue_count--; - if (q->properties.is_active) { - decrement_queue_count(dqm, q->properties.type); - if (q->properties.is_gws) { - dqm->gws_queue_count--; - qpd->mapped_gws_queue = false; - } - } + if (q->properties.is_active) + decrement_queue_count(dqm, qpd, q);

return retval; } @@ -604,12 +613,11 @@ static int update_queue(struct device_queue_manager *dqm, struct queue *q, * dqm->active_queue_count to determine whether a new runlist must be * uploaded. */ - if (q->properties.is_active && !prev_active) - increment_queue_count(dqm, q->properties.type); - else if (!q->properties.is_active && prev_active) - decrement_queue_count(dqm, q->properties.type); - - if (q->gws && !q->properties.is_gws) { + if (q->properties.is_active && !prev_active) { + increment_queue_count(dqm, &pdd->qpd, q); + } else if (!q->properties.is_active && prev_active) { + decrement_queue_count(dqm, &pdd->qpd, q); + } else if (q->gws && !q->properties.is_gws) { if (q->properties.is_active) { dqm->gws_queue_count++; pdd->qpd.mapped_gws_queue = true; @@ -671,11 +679,7 @@ static int evict_process_queues_nocpsch(struct device_queue_manager *dqm, mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type( q->properties.type)]; q->properties.is_active = false; - decrement_queue_count(dqm, q->properties.type); - if (q->properties.is_gws) { - dqm->gws_queue_count--; - qpd->mapped_gws_queue = false; - } + decrement_queue_count(dqm, qpd, q);

if (WARN_ONCE(!dqm->sched_running, "Evict when stopped\n")) continue; @@ -721,7 +725,7 @@ static int evict_process_queues_cpsch(struct device_queue_manager *dqm, continue;

q->properties.is_active = false; - decrement_queue_count(dqm, q->properties.type); + decrement_queue_count(dqm, qpd, q); } pdd->last_evict_timestamp = get_jiffies_64(); retval = execute_queues_cpsch(dqm, @@ -792,11 +796,7 @@ static int restore_process_queues_nocpsch(struct device_queue_manager *dqm, mqd_mgr = dqm->mqd_mgrs[get_mqd_type_from_queue_type( q->properties.type)]; q->properties.is_active = true; - increment_queue_count(dqm, q->properties.type); - if (q->properties.is_gws) { - dqm->gws_queue_count++; - qpd->mapped_gws_queue = true; - } + increment_queue_count(dqm, qpd, q);

if (WARN_ONCE(!dqm->sched_running, "Restore when stopped\n")) continue; @@ -854,7 +854,7 @@ static int restore_process_queues_cpsch(struct device_queue_manager *dqm, continue;

q->properties.is_active = true; - increment_queue_count(dqm, q->properties.type); + increment_queue_count(dqm, &pdd->qpd, q); } retval = execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0); @@ -1260,7 +1260,7 @@ static int create_kernel_queue_cpsch(struct device_queue_manager *dqm, dqm->total_queue_count);

list_add(&kq->list, &qpd->priv_queue_list); - increment_queue_count(dqm, kq->queue->properties.type); + increment_queue_count(dqm, qpd, kq->queue); qpd->is_debug = true; execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0); dqm_unlock(dqm); @@ -1274,7 +1274,7 @@ static void destroy_kernel_queue_cpsch(struct device_queue_manager *dqm, { dqm_lock(dqm); list_del(&kq->list); - decrement_queue_count(dqm, kq->queue->properties.type); + decrement_queue_count(dqm, qpd, kq->queue); qpd->is_debug = false; execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES, 0); /* @@ -1341,7 +1341,7 @@ static int create_queue_cpsch(struct device_queue_manager *dqm, struct queue *q, qpd->queue_count++;

if (q->properties.is_active) { - increment_queue_count(dqm, q->properties.type); + increment_queue_count(dqm, qpd, q);

execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0); @@ -1558,15 +1558,11 @@ static int destroy_queue_cpsch(struct device_queue_manager *dqm, list_del(&q->list); qpd->queue_count--; if (q->properties.is_active) { - decrement_queue_count(dqm, q->properties.type); + decrement_queue_count(dqm, qpd, q); retval = execute_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_DYNAMIC_QUEUES, 0); if (retval == -ETIME) qpd->reset_wavefronts = true; - if (q->properties.is_gws) { - dqm->gws_queue_count--; - qpd->mapped_gws_queue = false; - } }

/* @@ -1757,7 +1753,7 @@ static int process_termination_cpsch(struct device_queue_manager *dqm, /* Clean all kernel queues */ list_for_each_entry_safe(kq, kq_next, &qpd->priv_queue_list, list) { list_del(&kq->list); - decrement_queue_count(dqm, kq->queue->properties.type); + decrement_queue_count(dqm, qpd, kq->queue); qpd->is_debug = false; dqm->total_queue_count--; filter = KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES; @@ -1770,13 +1766,8 @@ static int process_termination_cpsch(struct device_queue_manager *dqm, else if (q->properties.type == KFD_QUEUE_TYPE_SDMA_XGMI) deallocate_sdma_queue(dqm, q);

- if (q->properties.is_active) { - decrement_queue_count(dqm, q->properties.type); - if (q->properties.is_gws) { - dqm->gws_queue_count--; - qpd->mapped_gws_queue = false; - } - } + if (q->properties.is_active) + decrement_queue_count(dqm, qpd, q);

dqm->total_queue_count--; }

From: Maxim Mikityanskiy maximmi@nvidia.com

[ Upstream commit a0df71948e9548de819a6f1da68f5f1742258a52 ]

Calling tls_append_frag when max_open_record_len == record->len might add an empty fragment to the TLS record if the call happens to be on the page boundary. Normally tls_append_frag coalesces the zero-sized fragment to the previous one, but not if it's on page boundary.

If a resync happens then, the mlx5 driver posts dump WQEs in tx_post_resync_dump, and the empty fragment may become a data segment with byte_count == 0, which will confuse the NIC and lead to a CQE error.

This commit fixes the described issue by skipping tls_append_frag on zero size to avoid adding empty fragments. The fix is not in the driver, because an empty fragment is hardly the desired behavior.

Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy maximmi@nvidia.com Reviewed-by: Tariq Toukan tariqt@nvidia.com Link: https://lore.kernel.org/r/20220426154949.159055-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/tls/tls_device.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c index b932469ee69c..a40553e83f8b 100644 --- a/net/tls/tls_device.c +++ b/net/tls/tls_device.c @@ -483,11 +483,13 @@ static int tls_push_data(struct sock *sk, copy = min_t(size_t, size, (pfrag->size - pfrag->offset)); copy = min_t(size_t, copy, (max_open_record_len - record->len));

- rc = tls_device_copy_data(page_address(pfrag->page) + - pfrag->offset, copy, msg_iter); - if (rc) - goto handle_error; - tls_append_frag(record, pfrag, copy); + if (copy) { + rc = tls_device_copy_data(page_address(pfrag->page) + + pfrag->offset, copy, msg_iter); + if (rc) + goto handle_error; + tls_append_frag(record, pfrag, copy); + }

size -= copy; if (!size) {

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit d2b52ec056d5bddb055c8f21d7489a23548d0838 ]

Put device node in error path in fec_enet_init_stop_mode().

Fixes: 8a448bf832af ("net: ethernet: fec: move GPR register offset and bit into DT") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20220426125231.375688-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fec_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 796133de527e..870919c66518 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3731,7 +3731,7 @@ static int fec_enet_init_stop_mode(struct fec_enet_private *fep, ARRAY_SIZE(out_val)); if (ret) { dev_dbg(&fep->pdev->dev, "no stop mode property\n"); - return ret; + goto out; }

fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);

From: Andreas Gruenbacher agruenba@redhat.com

[ Upstream commit 3bde4c48586074202044456285a97ccdf9048988 ]

When direct writes fail with -ENOTBLK because we're writing into a hole (gfs2_iomap_begin()) or because of a page invalidation failure (iomap_dio_rw()), we're falling back to buffered writes. In that case, when we lose the inode glock in gfs2_file_buffered_write(), we want to re-acquire it instead of returning a short write.

Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index de0122806fb3..fdc7eda0437a 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -1069,7 +1069,7 @@ static ssize_t gfs2_file_buffered_write(struct kiocb *iocb, from->count = min(from->count, window_size - leftover); if (gfs2_holder_queued(gh)) goto retry_under_glock; - if (read) + if (read && !(iocb->ki_flags & IOCB_DIRECT)) goto out_uninit; goto retry; }

From: Timothy Hayes timothy.hayes@arm.com

[ Upstream commit 4e13f6706d5aee1a6b835a44f6cf4971a921dcb8 ]

This patch corrects a bug whereby synthesized events from SPE samples are missing virtual addresses.

Fixes: 54f7815efef7fad9 ("perf arm-spe: Fill address info for samples") Reviewed-by: Leo Yan leo.yan@linaro.org Signed-off-by: Timothy Hayes timothy.hayes@arm.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: bpf@vger.kernel.org Cc: Jiri Olsa jolsa@kernel.org Cc: John Fastabend john.fastabend@gmail.com Cc: John Garry john.garry@huawei.com Cc: KP Singh kpsingh@kernel.org Cc: Leo Yan leo.yan@linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland mark.rutland@arm.com Cc: Martin KaFai Lau kafai@fb.com Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: Namhyung Kim namhyung@kernel.org Cc: netdev@vger.kernel.org Cc: Song Liu songliubraving@fb.com Cc: Will Deacon will@kernel.org Cc: Yonghong Song yhs@fb.com Link: https://lore.kernel.org/r/20220421165205.117662-2-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/arm-spe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c index d2b64e3f588b..151cc38a171c 100644 --- a/tools/perf/util/arm-spe.c +++ b/tools/perf/util/arm-spe.c @@ -1036,7 +1036,7 @@ arm_spe_synth_events(struct arm_spe *spe, struct perf_session *session) attr.sample_type = evsel->core.attr.sample_type & PERF_SAMPLE_MASK; attr.sample_type |= PERF_SAMPLE_IP | PERF_SAMPLE_TID | PERF_SAMPLE_PERIOD | PERF_SAMPLE_DATA_SRC | - PERF_SAMPLE_WEIGHT; + PERF_SAMPLE_WEIGHT | PERF_SAMPLE_ADDR; if (spe->timeless_decoding) attr.sample_type &= ~(u64)PERF_SAMPLE_TIME; else

From: Vladimir Oltean vladimir.oltean@nxp.com

[ Upstream commit 66a2f5ef68faaf950746747d790a0c95f7ec96d2 ]

The Time-Specified Departure feature is indeed mutually exclusive with TX IP checksumming in ENETC, but TX checksumming in itself is broken and was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx checksumming offload code").

The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply with software TSO's expectations, and still did the checksumming in software by calling skb_checksum_help(). So there isn't any restriction for the Time-Specified Departure feature.

However, enetc_setup_tc_txtime() doesn't understand that, and blindly looks for NETIF_F_CSUM_MASK.

Instead of checking for things which can literally never happen in the current code base, just remove the check and let the driver offload tc-etf qdiscs.

Fixes: acede3c5dad5 ("net: enetc: declare NETIF_F_HW_CSUM and do it in software") Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Link: https://lore.kernel.org/r/20220427203017.1291634-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/enetc/enetc_qos.c | 4 ---- 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c index d3d7172e0fcc..3b148d4e0f0c 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c @@ -308,10 +308,6 @@ int enetc_setup_tc_txtime(struct net_device *ndev, void *type_data) if (tc < 0 || tc >= priv->num_tx_rings) return -EINVAL;

- /* Do not support TXSTART and TX CSUM offload simutaniously */ - if (ndev->features & NETIF_F_CSUM_MASK) - return -EBUSY; - /* TSD and Qbv are mutually exclusive in hardware */ if (enetc_rd(&priv->si->hw, ENETC_QBV_PTGCR_OFFSET) & ENETC_QBV_TGE) return -EBUSY;

From: Pengcheng Yang yangpc@wangsu.com

[ Upstream commit d9157f6806d1499e173770df1f1b234763de5c79 ]

Currently DSACK is regarded as a dupack, which may cause F-RTO to incorrectly enter "loss was real" when receiving DSACK.

Packetdrill to demonstrate:

// Enable F-RTO and TLP 0 `sysctl -q net.ipv4.tcp_frto=2` 0 `sysctl -q net.ipv4.tcp_early_retrans=3` 0 `sysctl -q net.ipv4.tcp_congestion_control=cubic`

// Establish a connection +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0

// RTT 10ms, RTO 210ms +.1 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.01 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4

// Send 2 data segments +0 write(4, ..., 2000) = 2000 +0 > P. 1:2001(2000) ack 1

// TLP +.022 > P. 1001:2001(1000) ack 1

// Continue to send 8 data segments +0 write(4, ..., 10000) = 10000 +0 > P. 2001:10001(8000) ack 1

// RTO +.188 > . 1:1001(1000) ack 1

// The original data is acked and new data is sent(F-RTO step 2.b) +0 < . 1:1(0) ack 2001 win 257 +0 > P. 10001:12001(2000) ack 1

// D-SACK caused by TLP is regarded as a dupack, this results in // the incorrect judgment of "loss was real"(F-RTO step 3.a) +.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>

// Never-retransmitted data(3001:4001) are acked and // expect to switch to open state(F-RTO step 3.b) +0 < . 1:1(0) ack 4001 win 257 +0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%

Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO") Signed-off-by: Pengcheng Yang yangpc@wangsu.com Acked-by: Neal Cardwell ncardwell@google.com Tested-by: Neal Cardwell ncardwell@google.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_input.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 525bf37c0fdb..7bf84ce34d9e 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -3867,7 +3867,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) tcp_process_tlp_ack(sk, ack, flag);

if (tcp_ack_is_dubious(sk, flag)) { - if (!(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP))) { + if (!(flag & (FLAG_SND_UNA_ADVANCED | + FLAG_NOT_DUP | FLAG_DSACKING_ACK))) { num_dupack = 1; /* Consider if pure acks were aggregated in tcp_add_backlog() */ if (!(flag & FLAG_DATA))

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit fb6d679fee95d272c0a94912c4e534146823ee89 ]

At the kzalloc() call in dpcm_be_connect(), there is no spin lock involved. It's merely protected by card->pcm_mutex, instead. The spinlock is applied at the later call with snd_soc_pcm_stream_lock_irq() only for the list manipulations. (See it's *_irq(), not *_irqsave(); that means the context being sleepable at that point.) So, we can use GFP_KERNEL safely there.

This patch revert commit d8a9c6e1f676 ("ASoC: soc-pcm: use GFP_ATOMIC for dpcm structure") which is no longer needed since commit b7898396f4bb ("ASoC: soc-pcm: Fix and cleanup DPCM locking").

Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/e740f1930843060e025e3c0f17ec1393cfdafb26.164875796... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-pcm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 9a954680d492..11c9853e9e80 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1214,7 +1214,7 @@ static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe, be_substream->pcm->nonatomic = 1; }

- dpcm = kzalloc(sizeof(struct snd_soc_dpcm), GFP_ATOMIC); + dpcm = kzalloc(sizeof(struct snd_soc_dpcm), GFP_KERNEL); if (!dpcm) return -ENOMEM;

From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com

[ Upstream commit 770f3d992a3f7330f801dfeee98429b2885c9fdb ]

This patch takes a defensive programming and paranoid approach in case the parent device (SoundWire) is pm_runtime resumed but the rt711 device is not. In that case, during the attachment and initialization, a jack detection workqueue can be scheduled. Since the pm_runtime suspend routines will not be invoked, the sequence to cancel all deferred work is not executed, and the jack detection could happen after the bus stops operating, leading to a timeout.

This patch applies the same solution to rt5682, based on the similarities between codec drivers. The race condition with rt5682 was not detected experimentally though.

BugLink: https://github.com/thesofproject/linux/issues/3459 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Rander Wang rander.wang@intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20220406192005.262996-1-pierre-louis.bossart@linux... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5682.c | 9 +++++++++ sound/soc/codecs/rt711.c | 7 +++++++ 2 files changed, 16 insertions(+)

diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c index c9ff9c89adf7..2b6c6d6b9771 100644 --- a/sound/soc/codecs/rt5682.c +++ b/sound/soc/codecs/rt5682.c @@ -1100,6 +1100,15 @@ void rt5682_jack_detect_handler(struct work_struct *work) return; }

+ if (rt5682->is_sdw) { + if (pm_runtime_status_suspended(rt5682->slave->dev.parent)) { + dev_dbg(&rt5682->slave->dev, + "%s: parent device is pm_runtime_status_suspended, skipping jack detection\n", + __func__); + return; + } + } + dapm = snd_soc_component_get_dapm(rt5682->component);

snd_soc_dapm_mutex_lock(dapm); diff --git a/sound/soc/codecs/rt711.c b/sound/soc/codecs/rt711.c index 6770825d037a..ea25fd58d43a 100644 --- a/sound/soc/codecs/rt711.c +++ b/sound/soc/codecs/rt711.c @@ -245,6 +245,13 @@ static void rt711_jack_detect_handler(struct work_struct *work) if (!rt711->component->card->instantiated) return;

+ if (pm_runtime_status_suspended(rt711->slave->dev.parent)) { + dev_dbg(&rt711->slave->dev, + "%s: parent device is pm_runtime_status_suspended, skipping jack detection\n", + __func__); + return; + } + reg = RT711_VERB_GET_PIN_SENSE | RT711_HP_OUT; ret = regmap_read(rt711->regmap, reg, &jack_status); if (ret < 0)

From: Zheyu Ma zheyuma97@gmail.com

[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]

When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] <TASK> [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8731.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 86b1f6eaa599..518167d90b10 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -602,7 +602,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731) ret = wm8731_reset(wm8731->regmap); if (ret < 0) { dev_err(dev, "Failed to issue reset: %d\n", ret); - goto err_regulator_enable; + goto err; }

/* Clear POWEROFF, keep everything else disabled */ @@ -619,10 +619,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)

regcache_mark_dirty(wm8731->regmap);

-err_regulator_enable: - /* Regulators will be enabled by bias management */ - regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); - +err: return ret; }

@@ -760,21 +757,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c, ret = PTR_ERR(wm8731->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", ret); - return ret; + goto err_regulator_enable; }

ret = wm8731_hw_init(&i2c->dev, wm8731); if (ret != 0) - return ret; + goto err_regulator_enable;

ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_wm8731, &wm8731_dai, 1); if (ret != 0) { dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); - return ret; + goto err_regulator_enable; }

return 0; + +err_regulator_enable: + /* Regulators will be enabled by bias management */ + regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies); + + return ret; }

static int wm8731_i2c_remove(struct i2c_client *client)