5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Miquel Raynal miquel.raynal@bootlin.com

[ Upstream commit 3e01d5254698ea3d18e09d96b974c762328352cd ]

The NAND core complies with the ONFI specification, which itself mentions that after any program or erase operation, a status check should be performed to see whether the operation was finished *and* successful.

The NAND core offers helpers to finish a page write (sending the "PAGE PROG" command, waiting for the NAND chip to be ready again, and checking the operation status). But in some cases, advanced controller drivers might want to optimize this and craft their own page write helper to leverage additional hardware capabilities, thus not always using the core facilities.

Some drivers, like this one, do not use the core helper to finish a page write because the final cycles are automatically managed by the hardware. In this case, the additional care must be taken to manually perform the final status check.

Let's read the NAND chip status at the end of the page write helper and return -EIO upon error.

Cc: stable@vger.kernel.org Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Reported-by: Aviram Dali aviramd@marvell.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Tested-by: Ravi Chandra Minnikanti rminnikanti@marvell.com Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-1-miquel.raynal@boot... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/nand/raw/marvell_nand.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c index c49a3e105b427..9a119688c0a63 100644 --- a/drivers/mtd/nand/raw/marvell_nand.c +++ b/drivers/mtd/nand/raw/marvell_nand.c @@ -1109,6 +1109,7 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip, .ndcb[2] = NDCB2_ADDR5_PAGE(page), }; unsigned int oob_bytes = lt->spare_bytes + (raw ? lt->ecc_bytes : 0); + u8 status; int ret;

/* NFCv2 needs more information about the operation being executed */ @@ -1142,7 +1143,18 @@ static int marvell_nfc_hw_ecc_hmg_do_write_page(struct nand_chip *chip,

ret = marvell_nfc_wait_op(chip, PSEC_TO_MSEC(chip->data_interface.timings.sdr.tPROG_max)); - return ret; + if (ret) + return ret; + + /* Check write status on the chip side */ + ret = nand_status_op(chip, &status); + if (ret) + return ret; + + if (status & NAND_STATUS_FAIL) + return -EIO; + + return 0; }

static int marvell_nfc_hw_ecc_hmg_write_page_raw(struct nand_chip *chip, @@ -1570,6 +1582,7 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip, int data_len = lt->data_bytes; int spare_len = lt->spare_bytes; int chunk, ret; + u8 status;

marvell_nfc_select_target(chip, chip->cur_cs);

@@ -1607,6 +1620,14 @@ static int marvell_nfc_hw_ecc_bch_write_page(struct nand_chip *chip, if (ret) return ret;

+ /* Check write status on the chip side */ + ret = nand_status_op(chip, &status); + if (ret) + return ret; + + if (status & NAND_STATUS_FAIL) + return -EIO; + return 0; }

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rodríguez Barbarin, José Javier JoseJavier.Rodriguez@duagon.com

[ Upstream commit a889c276d33d333ae96697510f33533f6e9d9591 ]

The function chameleon_parse_cells() returns the number of cells parsed which has an undetermined size. This return value is only used for error checking but the number of cells is never used.

Change return value to be number of bytes parsed to allow for memory management improvements.

Co-developed-by: Jorge Sanjuan Garcia jorge.sanjuangarcia@duagon.com Signed-off-by: Jorge Sanjuan Garcia jorge.sanjuangarcia@duagon.com Signed-off-by: Javier Rodriguez josejavier.rodriguez@duagon.com Signed-off-by: Johannes Thumshirn jth@kernel.org Link: https://lore.kernel.org/r/20230411083329.4506-2-jth@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mcb/mcb-parse.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c index c111025f23c5d..a88862ff8507f 100644 --- a/drivers/mcb/mcb-parse.c +++ b/drivers/mcb/mcb-parse.c @@ -128,7 +128,7 @@ static void chameleon_parse_bar(void __iomem *base, } }

-static int chameleon_get_bar(char __iomem **base, phys_addr_t mapbase, +static int chameleon_get_bar(void __iomem **base, phys_addr_t mapbase, struct chameleon_bar **cb) { struct chameleon_bar *c; @@ -177,12 +177,13 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase, { struct chameleon_fpga_header *header; struct chameleon_bar *cb; - char __iomem *p = base; + void __iomem *p = base; int num_cells = 0; uint32_t dtype; int bar_count; int ret; u32 hsize; + u32 table_size;

hsize = sizeof(struct chameleon_fpga_header);

@@ -237,12 +238,16 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase, num_cells++; }

- if (num_cells == 0) - num_cells = -EINVAL; + if (num_cells == 0) { + ret = -EINVAL; + goto free_bar; + }

+ table_size = p - base; + pr_debug("%d cell(s) found. Chameleon table size: 0x%04x bytes\n", num_cells, table_size); kfree(cb); kfree(header); - return num_cells; + return table_size;

free_bar: kfree(cb);

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gavin Shan gshan@redhat.com

commit 07622bd415639e9709579f400afd19e7e9866e5e upstream.

The deflation request to the target, which isn't unaligned to the guest page size causes endless deflation and inflation actions. For example, we receive the flooding QMP events for the changes on memory balloon's size after a deflation request to the unaligned target is sent for the ARM64 guest, where we have 64KB base page size.

/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host -cpu host \ -smp maxcpus=8,cpus=8,sockets=2,clusters=2,cores=2,threads=1 \ -m 1024M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=512M \ -object memory-backend-ram,id=mem1,size=512M \ -numa node,nodeid=0,memdev=mem0,cpus=0-3 \ -numa node,nodeid=1,memdev=mem1,cpus=4-7 \ : \ -device virtio-balloon-pci,id=balloon0,bus=pcie.10

{ "execute" : "balloon", "arguments": { "value" : 1073672192 } } {"return": {}} {"timestamp": {"seconds": 1693272173, "microseconds": 88667}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272174, "microseconds": 89704}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272175, "microseconds": 90819}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272176, "microseconds": 91961}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272177, "microseconds": 93040}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272178, "microseconds": 94117}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272179, "microseconds": 95337}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272180, "microseconds": 96615}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272181, "microseconds": 97626}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272182, "microseconds": 98693}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} {"timestamp": {"seconds": 1693272183, "microseconds": 99698}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272184, "microseconds": 100727}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272185, "microseconds": 90430}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} {"timestamp": {"seconds": 1693272186, "microseconds": 102999}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073676288}} : <The similar QMP events repeat>

Fix it by aligning the target up to the guest page size, 64KB in this specific case. With this applied, no flooding QMP events are observed and the memory balloon's size can be stablizied to 0x3ffe0000 soon after the deflation request is sent.

{ "execute" : "balloon", "arguments": { "value" : 1073672192 } } {"return": {}} {"timestamp": {"seconds": 1693273328, "microseconds": 793075}, \ "event": "BALLOON_CHANGE", "data": {"actual": 1073610752}} { "execute" : "query-balloon" } {"return": {"actual": 1073610752}}

Cc: stable@vger.kernel.org Signed-off-by: Gavin Shan gshan@redhat.com Tested-by: Zhenyu Zhang zhenyzha@redhat.com Message-Id: 20230831011007.1032822-1-gshan@redhat.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Reviewed-by: David Hildenbrand david@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/virtio/virtio_balloon.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -365,7 +365,11 @@ static inline s64 towards_target(struct if (!virtio_has_feature(vb->vdev, VIRTIO_F_VERSION_1)) num_pages = le32_to_cpu((__force __le32)num_pages);

- target = num_pages; + /* + * Aligned up to guest page size to avoid inflating and deflating + * balloon endlessly. + */ + target = ALIGN(num_pages, VIRTIO_BALLOON_PAGES_PER_PAGE); return target - vb->num_pages; }

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mirsad Goran Todorovac mirsad.todorovac@alu.unizg.hr

[ Upstream commit dcf75a0f6bc136de94e88178ae5f51b7f879abc9 ]

KCSAN reported the following data-race:

================================================================== BUG: KCSAN: data-race in rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169

race at unknown origin, with read to 0xffff888140d37570 of 4 bytes by interrupt on cpu 21: rtl8169_poll (drivers/net/ethernet/realtek/r8169_main.c:4368 drivers/net/ethernet/realtek/r8169_main.c:4581) r8169 __napi_poll (net/core/dev.c:6527) net_rx_action (net/core/dev.c:6596 net/core/dev.c:6727) __do_softirq (kernel/softirq.c:553) __irq_exit_rcu (kernel/softirq.c:427 kernel/softirq.c:632) irq_exit_rcu (kernel/softirq.c:647) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1074 (discriminator 14)) asm_sysvec_apic_timer_interrupt (./arch/x86/include/asm/idtentry.h:645) cpuidle_enter_state (drivers/cpuidle/cpuidle.c:291) cpuidle_enter (drivers/cpuidle/cpuidle.c:390) call_cpuidle (kernel/sched/idle.c:135) do_idle (kernel/sched/idle.c:219 kernel/sched/idle.c:282) cpu_startup_entry (kernel/sched/idle.c:378 (discriminator 1)) start_secondary (arch/x86/kernel/smpboot.c:210 arch/x86/kernel/smpboot.c:294) secondary_startup_64_no_verify (arch/x86/kernel/head_64.S:433)

value changed: 0xb0000042 -> 0x00000000

Reported by Kernel Concurrency Sanitizer on: CPU: 21 PID: 0 Comm: swapper/21 Tainted: G L 6.6.0-rc2-kcsan-00143-gb5cbe7c00aa0 #41 Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 ==================================================================

The read side is in

drivers/net/ethernet/realtek/r8169_main.c ========================================= 4355 static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, 4356 int budget) 4357 { 4358 unsigned int dirty_tx, bytes_compl = 0, pkts_compl = 0; 4359 struct sk_buff *skb; 4360 4361 dirty_tx = tp->dirty_tx; 4362 4363 while (READ_ONCE(tp->cur_tx) != dirty_tx) { 4364 unsigned int entry = dirty_tx % NUM_TX_DESC; 4365 u32 status; 4366 → 4367 status = le32_to_cpu(tp->TxDescArray[entry].opts1); 4368 if (status & DescOwn) 4369 break; 4370 4371 skb = tp->tx_skb[entry].skb; 4372 rtl8169_unmap_tx_skb(tp, entry); 4373 4374 if (skb) { 4375 pkts_compl++; 4376 bytes_compl += skb->len; 4377 napi_consume_skb(skb, budget); 4378 } 4379 dirty_tx++; 4380 } 4381 4382 if (tp->dirty_tx != dirty_tx) { 4383 dev_sw_netstats_tx_add(dev, pkts_compl, bytes_compl); 4384 WRITE_ONCE(tp->dirty_tx, dirty_tx); 4385 4386 netif_subqueue_completed_wake(dev, 0, pkts_compl, bytes_compl, 4387 rtl_tx_slots_avail(tp), 4388 R8169_TX_START_THRS); 4389 /* 4390 * 8168 hack: TxPoll requests are lost when the Tx packets are 4391 * too close. Let's kick an extra TxPoll request when a burst 4392 * of start_xmit activity is detected (if it is not detected, 4393 * it is slow enough). -- FR 4394 * If skb is NULL then we come here again once a tx irq is 4395 * triggered after the last fragment is marked transmitted. 4396 */ 4397 if (READ_ONCE(tp->cur_tx) != dirty_tx && skb) 4398 rtl8169_doorbell(tp); 4399 } 4400 }

tp->TxDescArray[entry].opts1 is reported to have a data-race and READ_ONCE() fixes this KCSAN warning.

4366 → 4367 status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1)); 4368 if (status & DescOwn) 4369 break; 4370

Cc: Heiner Kallweit hkallweit1@gmail.com Cc: nic_swsd@realtek.com Cc: "David S. Miller" davem@davemloft.net Cc: Eric Dumazet edumazet@google.com Cc: Jakub Kicinski kuba@kernel.org Cc: Paolo Abeni pabeni@redhat.com Cc: Marco Elver elver@google.com Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/lkml/dc7fc8fa-4ea4-e9a9-30a6-7c83e6b53188@alu.unizg.... Signed-off-by: Mirsad Goran Todorovac mirsad.todorovac@alu.unizg.hr Acked-by: Marco Elver elver@google.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/realtek/r8169_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 8d2b184ff5758..b973198da96c3 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -6031,7 +6031,7 @@ static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp, struct ring_info *tx_skb = tp->tx_skb + entry; u32 status;

- status = le32_to_cpu(tp->TxDescArray[entry].opts1); + status = le32_to_cpu(READ_ONCE(tp->TxDescArray[entry].opts1)); if (status & DescOwn) break;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kunwu Chan chentao@kylinos.cn

[ Upstream commit fb71ba0ed8be9534493c80ba00142a64d9972a72 ]

reques -> request

Fixes: 09dde54c6a69 ("PS3: gelic: Add wireless support for PS3") Signed-off-by: Kunwu Chan chentao@kylinos.cn Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c index 2db546b27ee00..411b2a6091c91 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c @@ -1217,7 +1217,7 @@ static int gelic_wl_set_encodeext(struct net_device *netdev, key_index = wl->current_key;

if (!enc->length && (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY)) { - /* reques to change default key index */ + /* request to change default key index */ pr_debug("%s: request to change default key to %d\n", __func__, key_index); wl->current_key = key_index;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet edumazet@google.com

[ Upstream commit a9beb7e81bcb876615e1fbb3c07f3f9dba69831f ]

1) tbl->gc_thresh1, tbl->gc_thresh2, tbl->gc_thresh3 and tbl->gc_interval can be written from sysfs.

2) tbl->last_flush is read locklessly from neigh_alloc()

3) tbl->proxy_queue.qlen is read locklessly from neightbl_fill_info()

4) neightbl_fill_info() reads cpu stats that can be changed concurrently.

Fixes: c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink") Signed-off-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20231019122104.1448310-1-edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/neighbour.c | 67 +++++++++++++++++++++++--------------------- 1 file changed, 35 insertions(+), 32 deletions(-)

diff --git a/net/core/neighbour.c b/net/core/neighbour.c index c0489d8812c0e..9d631b7adb7bf 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -224,7 +224,8 @@ bool neigh_remove_one(struct neighbour *ndel, struct neigh_table *tbl)

static int neigh_forced_gc(struct neigh_table *tbl) { - int max_clean = atomic_read(&tbl->gc_entries) - tbl->gc_thresh2; + int max_clean = atomic_read(&tbl->gc_entries) - + READ_ONCE(tbl->gc_thresh2); unsigned long tref = jiffies - 5 * HZ; struct neighbour *n, *tmp; int shrunk = 0; @@ -253,7 +254,7 @@ static int neigh_forced_gc(struct neigh_table *tbl) } }

- tbl->last_flush = jiffies; + WRITE_ONCE(tbl->last_flush, jiffies);

write_unlock_bh(&tbl->lock);

@@ -409,17 +410,17 @@ static struct neighbour *neigh_alloc(struct neigh_table *tbl, { struct neighbour *n = NULL; unsigned long now = jiffies; - int entries; + int entries, gc_thresh3;

if (exempt_from_gc) goto do_alloc;

entries = atomic_inc_return(&tbl->gc_entries) - 1; - if (entries >= tbl->gc_thresh3 || - (entries >= tbl->gc_thresh2 && - time_after(now, tbl->last_flush + 5 * HZ))) { - if (!neigh_forced_gc(tbl) && - entries >= tbl->gc_thresh3) { + gc_thresh3 = READ_ONCE(tbl->gc_thresh3); + if (entries >= gc_thresh3 || + (entries >= READ_ONCE(tbl->gc_thresh2) && + time_after(now, READ_ONCE(tbl->last_flush) + 5 * HZ))) { + if (!neigh_forced_gc(tbl) && entries >= gc_thresh3) { net_info_ratelimited("%s: neighbor table overflow!\n", tbl->id); NEIGH_CACHE_STAT_INC(tbl, table_fulls); @@ -902,13 +903,14 @@ static void neigh_periodic_work(struct work_struct *work)

if (time_after(jiffies, tbl->last_rand + 300 * HZ)) { struct neigh_parms *p; - tbl->last_rand = jiffies; + + WRITE_ONCE(tbl->last_rand, jiffies); list_for_each_entry(p, &tbl->parms_list, list) p->reachable_time = neigh_rand_reach_time(NEIGH_VAR(p, BASE_REACHABLE_TIME)); }

- if (atomic_read(&tbl->entries) < tbl->gc_thresh1) + if (atomic_read(&tbl->entries) < READ_ONCE(tbl->gc_thresh1)) goto out;

for (i = 0 ; i < (1 << nht->hash_shift); i++) { @@ -2050,15 +2052,16 @@ static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl, ndtmsg->ndtm_pad2 = 0;

if (nla_put_string(skb, NDTA_NAME, tbl->id) || - nla_put_msecs(skb, NDTA_GC_INTERVAL, tbl->gc_interval, NDTA_PAD) || - nla_put_u32(skb, NDTA_THRESH1, tbl->gc_thresh1) || - nla_put_u32(skb, NDTA_THRESH2, tbl->gc_thresh2) || - nla_put_u32(skb, NDTA_THRESH3, tbl->gc_thresh3)) + nla_put_msecs(skb, NDTA_GC_INTERVAL, READ_ONCE(tbl->gc_interval), + NDTA_PAD) || + nla_put_u32(skb, NDTA_THRESH1, READ_ONCE(tbl->gc_thresh1)) || + nla_put_u32(skb, NDTA_THRESH2, READ_ONCE(tbl->gc_thresh2)) || + nla_put_u32(skb, NDTA_THRESH3, READ_ONCE(tbl->gc_thresh3))) goto nla_put_failure; { unsigned long now = jiffies; - long flush_delta = now - tbl->last_flush; - long rand_delta = now - tbl->last_rand; + long flush_delta = now - READ_ONCE(tbl->last_flush); + long rand_delta = now - READ_ONCE(tbl->last_rand); struct neigh_hash_table *nht; struct ndt_config ndc = { .ndtc_key_len = tbl->key_len, @@ -2066,7 +2069,7 @@ static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl, .ndtc_entries = atomic_read(&tbl->entries), .ndtc_last_flush = jiffies_to_msecs(flush_delta), .ndtc_last_rand = jiffies_to_msecs(rand_delta), - .ndtc_proxy_qlen = tbl->proxy_queue.qlen, + .ndtc_proxy_qlen = READ_ONCE(tbl->proxy_queue.qlen), };

rcu_read_lock_bh(); @@ -2089,17 +2092,17 @@ static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl, struct neigh_statistics *st;

st = per_cpu_ptr(tbl->stats, cpu); - ndst.ndts_allocs += st->allocs; - ndst.ndts_destroys += st->destroys; - ndst.ndts_hash_grows += st->hash_grows; - ndst.ndts_res_failed += st->res_failed; - ndst.ndts_lookups += st->lookups; - ndst.ndts_hits += st->hits; - ndst.ndts_rcv_probes_mcast += st->rcv_probes_mcast; - ndst.ndts_rcv_probes_ucast += st->rcv_probes_ucast; - ndst.ndts_periodic_gc_runs += st->periodic_gc_runs; - ndst.ndts_forced_gc_runs += st->forced_gc_runs; - ndst.ndts_table_fulls += st->table_fulls; + ndst.ndts_allocs += READ_ONCE(st->allocs); + ndst.ndts_destroys += READ_ONCE(st->destroys); + ndst.ndts_hash_grows += READ_ONCE(st->hash_grows); + ndst.ndts_res_failed += READ_ONCE(st->res_failed); + ndst.ndts_lookups += READ_ONCE(st->lookups); + ndst.ndts_hits += READ_ONCE(st->hits); + ndst.ndts_rcv_probes_mcast += READ_ONCE(st->rcv_probes_mcast); + ndst.ndts_rcv_probes_ucast += READ_ONCE(st->rcv_probes_ucast); + ndst.ndts_periodic_gc_runs += READ_ONCE(st->periodic_gc_runs); + ndst.ndts_forced_gc_runs += READ_ONCE(st->forced_gc_runs); + ndst.ndts_table_fulls += READ_ONCE(st->table_fulls); }

if (nla_put_64bit(skb, NDTA_STATS, sizeof(ndst), &ndst, @@ -2323,16 +2326,16 @@ static int neightbl_set(struct sk_buff *skb, struct nlmsghdr *nlh, goto errout_tbl_lock;

if (tb[NDTA_THRESH1]) - tbl->gc_thresh1 = nla_get_u32(tb[NDTA_THRESH1]); + WRITE_ONCE(tbl->gc_thresh1, nla_get_u32(tb[NDTA_THRESH1]));

if (tb[NDTA_THRESH2]) - tbl->gc_thresh2 = nla_get_u32(tb[NDTA_THRESH2]); + WRITE_ONCE(tbl->gc_thresh2, nla_get_u32(tb[NDTA_THRESH2]));

if (tb[NDTA_THRESH3]) - tbl->gc_thresh3 = nla_get_u32(tb[NDTA_THRESH3]); + WRITE_ONCE(tbl->gc_thresh3, nla_get_u32(tb[NDTA_THRESH3]));

if (tb[NDTA_GC_INTERVAL]) - tbl->gc_interval = nla_get_msecs(tb[NDTA_GC_INTERVAL]); + WRITE_ONCE(tbl->gc_interval, nla_get_msecs(tb[NDTA_GC_INTERVAL]));

err = 0;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit ca082f019d8fbb983f03080487946da714154bae ]

strncat() usage in adf7242_debugfs_init() is wrong. The size given to strncat() is the maximum number of bytes that can be written, excluding the trailing NULL.

Here, the size that is passed, DNAME_INLINE_LEN, does not take into account the size of "adf7242-" that is already in the array.

In order to fix it, use snprintf() instead.

Fixes: 7302b9d90117 ("ieee802154/adf7242: Driver for ADF7242 MAC IEEE802154") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ieee802154/adf7242.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ieee802154/adf7242.c b/drivers/net/ieee802154/adf7242.c index cb29da961e12b..179e3e42b5f03 100644 --- a/drivers/net/ieee802154/adf7242.c +++ b/drivers/net/ieee802154/adf7242.c @@ -1162,9 +1162,10 @@ static int adf7242_stats_show(struct seq_file *file, void *offset)

static void adf7242_debugfs_init(struct adf7242_local *lp) { - char debugfs_dir_name[DNAME_INLINE_LEN + 1] = "adf7242-"; + char debugfs_dir_name[DNAME_INLINE_LEN + 1];

- strncat(debugfs_dir_name, dev_name(&lp->spi->dev), DNAME_INLINE_LEN); + snprintf(debugfs_dir_name, sizeof(debugfs_dir_name), + "adf7242-%s", dev_name(&lp->spi->dev));

lp->debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL);

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Douglas Anderson dianders@chromium.org

[ Upstream commit 5dd17689526971c5ae12bc8398f34bd68cd0499e ]

The rtl8152_probe() function lacks a call to the chip-specific unload() routine when it sees an error in probe. Add it in to match the cleanup code in rtl8152_disconnect().

Fixes: ac718b69301c ("net/usb: new driver for RTL8152") Signed-off-by: Douglas Anderson dianders@chromium.org Reviewed-by: Grant Grundler grundler@chromium.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index fa13a19e844c1..8f8ad48ffb011 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -5779,6 +5779,8 @@ static int rtl8152_probe(struct usb_interface *intf,

out1: tasklet_kill(&tp->tx_tl); + if (tp->rtl_ops.unload) + tp->rtl_ops.unload(tp); usb_set_intfdata(intf, NULL); out: free_netdev(netdev);

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fred Chen fred.chenchen03@gmail.com

[ Upstream commit d2a0fc372aca561556e765d0a9ec365c7c12f0ad ]

This commit fix wrong RTO timeout when received SACK reneging.

When an ACK arrived pointing to a SACK reneging, tcp_check_sack_reneging() will rearm the RTO timer for min(1/2*srtt, 10ms) into to the future.

But since the commit 62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN") merged, the tcp_set_xmit_timer() is moved after tcp_fastretrans_alert()(which do the SACK reneging check), so the RTO timeout will be overwrited by tcp_set_xmit_timer() with icsk_rto instead of 1/2*srtt.

Here is a packetdrill script to check this bug: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0

// simulate srtt to 100ms +0 < S 0:0(0) win 32792 <mss 1000, sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> +.1 < . 1:1(0) ack 1 win 1024

+0 accept(3, ..., ...) = 4

+0 write(4, ..., 10000) = 10000 +0 > P. 1:10001(10000) ack 1

// inject sack +.1 < . 1:1(0) ack 1 win 257 <sack 1001:10001,nop,nop> +0 > . 1:1001(1000) ack 1

// inject sack reneging +.1 < . 1:1(0) ack 1001 win 257 <sack 9001:10001,nop,nop>

// we expect rto fired in 1/2*srtt (50ms) +.05 > . 1001:2001(1000) ack 1

This fix remove the FLAG_SET_XMIT_TIMER from ack_flag when tcp_check_sack_reneging() set RTO timer with 1/2*srtt to avoid being overwrited later.

Fixes: 62d9f1a6945b ("tcp: fix TLP timer not set when CA_STATE changes from DISORDER to OPEN") Signed-off-by: Fred Chen fred.chenchen03@gmail.com Reviewed-by: Neal Cardwell ncardwell@google.com Tested-by: Neal Cardwell ncardwell@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp_input.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index ec3c23adbab44..c3f227c4c3567 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2057,16 +2057,17 @@ void tcp_enter_loss(struct sock *sk) * restore sanity to the SACK scoreboard. If the apparent reneging * persists until this RTO then we'll clear the SACK scoreboard. */ -static bool tcp_check_sack_reneging(struct sock *sk, int flag) +static bool tcp_check_sack_reneging(struct sock *sk, int *ack_flag) { - if (flag & FLAG_SACK_RENEGING && - flag & FLAG_SND_UNA_ADVANCED) { + if (*ack_flag & FLAG_SACK_RENEGING && + *ack_flag & FLAG_SND_UNA_ADVANCED) { struct tcp_sock *tp = tcp_sk(sk); unsigned long delay = max(usecs_to_jiffies(tp->srtt_us >> 4), msecs_to_jiffies(10));

inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS, delay, TCP_RTO_MAX); + *ack_flag &= ~FLAG_SET_XMIT_TIMER; return true; } return false; @@ -2840,7 +2841,7 @@ static void tcp_fastretrans_alert(struct sock *sk, const u32 prior_snd_una, tp->prior_ssthresh = 0;

/* B. In all the states check for reneging SACKs. */ - if (tcp_check_sack_reneging(sk, flag)) + if (tcp_check_sack_reneging(sk, ack_flag)) return;

/* C. Check consistency of the current state. */

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso pablo@netfilter.org

[ Upstream commit 4530e5b8e2dad63dcad2206232dd86e4b1489b6c ]

Call skb_gso_validate_network_len() to check if packet is over PMTU.

Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/gtp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/gtp.c b/drivers/net/gtp.c index 0409afe9a53d6..c2e649a4f1bf4 100644 --- a/drivers/net/gtp.c +++ b/drivers/net/gtp.c @@ -544,8 +544,9 @@ static int gtp_build_skb_ip4(struct sk_buff *skb, struct net_device *dev,

rt->dst.ops->update_pmtu(&rt->dst, NULL, skb, mtu, false);

- if (!skb_is_gso(skb) && (iph->frag_off & htons(IP_DF)) && - mtu < ntohs(iph->tot_len)) { + if (iph->frag_off & htons(IP_DF) && + ((!skb_is_gso(skb) && skb->len > mtu) || + (skb_is_gso(skb) && !skb_gso_validate_network_len(skb, mtu)))) { netdev_dbg(dev, "packet too big, fragmentation needed\n"); icmp_ndo_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu));

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herve Codina herve.codina@bootlin.com

commit 3171d37b58a76e1febbf3f4af2d06234a98cf88b upstream.

i2c-mux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter.

Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount.

Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount.

Fixes: c4aee3e1b0de ("i2c: mux: pinctrl: remove platform_data") Signed-off-by: Herve Codina herve.codina@bootlin.com Cc: stable@vger.kernel.org Acked-by: Peter Rosin peda@axentia.se Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -62,7 +62,7 @@ static struct i2c_adapter *i2c_mux_pinct dev_err(dev, "Cannot parse i2c-parent\n"); return ERR_PTR(-ENODEV); } - parent = of_find_i2c_adapter_by_node(parent_np); + parent = of_get_i2c_adapter_by_node(parent_np); of_node_put(parent_np); if (!parent) return ERR_PTR(-EPROBE_DEFER);

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herve Codina herve.codina@bootlin.com

commit 0fb118de5003028ad092a4e66fc6d07b86c3bc94 upstream.

i2c-demux-pinctrl uses the pair of_find_i2c_adapter_by_node() / i2c_put_adapter(). These pair alone is not correct to properly lock the I2C parent adapter.

Indeed, i2c_put_adapter() decrements the module refcount while of_find_i2c_adapter_by_node() does not increment it. This leads to an underflow of the parent module refcount.

Use the dedicated function, of_get_i2c_adapter_by_node(), to handle correctly the module refcount.

Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Herve Codina herve.codina@bootlin.com Cc: stable@vger.kernel.org Acked-by: Peter Rosin peda@axentia.se Reviewed-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/muxes/i2c-demux-pinctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -61,7 +61,7 @@ static int i2c_demux_activate_master(str if (ret) goto err;

- adap = of_find_i2c_adapter_by_node(priv->chan[new_chan].parent_np); + adap = of_get_i2c_adapter_by_node(priv->chan[new_chan].parent_np); if (!adap) { ret = -ENODEV; goto err_with_revert;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jian Zhang zhangjian.3032@bytedance.com

commit 54f1840ddee9bbdc8dd89fbbfdfa632401244146 upstream.

When the `CONFIG_I2C_SLAVE` option is enabled and the device operates as a slave, a situation arises where the master sends a START signal without the accompanying STOP signal. This action results in a persistent I2C bus timeout. The core issue stems from the fact that the i2c controller remains in a slave read state without a timeout mechanism. As a consequence, the bus perpetually experiences timeouts.

In this case, the i2c bus will be reset, but the slave_state reset is missing.

Fixes: fee465150b45 ("i2c: aspeed: Reset the i2c controller when timeout occurs") Signed-off-by: Jian Zhang zhangjian.3032@bytedance.com Acked-by: Andi Shyti andi.shyti@kernel.org Tested-by: Andrew Jeffery andrew@codeconstruct.com.au Reviewed-by: Andrew Jeffery andrew@codeconstruct.com.au Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-aspeed.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -740,6 +740,8 @@ static void __aspeed_i2c_reg_slave(struc func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN; writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); + + bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; }

static int aspeed_i2c_reg_slave(struct i2c_client *client) @@ -756,7 +758,6 @@ static int aspeed_i2c_reg_slave(struct i __aspeed_i2c_reg_slave(bus, client->addr);

bus->slave = client; - bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; spin_unlock_irqrestore(&bus->lock, flags);

return 0;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peng Fan peng.fan@nxp.com

commit 414a98abbefd82d591f4e2d1efd2917bcd3b6f6d upstream.

The nregs for i.MX6SLL should be 80 per fuse map, correct it.

Fixes: 6da27821a6f5 ("nvmem: imx-ocotp: add support for imx6sll") Cc: Stable@vger.kernel.org Signed-off-by: Peng Fan peng.fan@nxp.com Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20231013124904.175782-2-srinivas.kandagatla@linaro... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/nvmem/imx-ocotp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/nvmem/imx-ocotp.c +++ b/drivers/nvmem/imx-ocotp.c @@ -433,7 +433,7 @@ static const struct ocotp_params imx6sl_ };

static const struct ocotp_params imx6sll_params = { - .nregs = 128, + .nregs = 80, .bank_address_words = 0, .set_timing = imx_ocotp_set_imx6_timing, };

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra peterz@infradead.org

commit a71ef31485bb51b846e8db8b3a35e432cc15afb5 upstream.

Smatch is awesome.

Fixes: 32671e3799ca ("perf: Disallow mis-matched inherited group reads") Reported-by: Dan Carpenter dan.carpenter@linaro.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/events/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -12015,7 +12015,8 @@ static int inherit_group(struct perf_eve !perf_get_aux_event(child_ctr, leader)) return -EINVAL; } - leader->group_generation = parent_event->group_generation; + if (leader) + leader->group_generation = parent_event->group_generation; return 0; }

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ivan Vecera ivecera@redhat.com

[ Upstream commit 77a8c982ff0d4c3a14022c6fe9e3dbfb327552ec ]

The I40E_TXR_FLAGS_WB_ON_ITR is i40e_ring flag and not i40e_pf one.

Fixes: 8e0764b4d6be42 ("i40e/i40evf: Add support for writeback on ITR feature for X722") Signed-off-by: Ivan Vecera ivecera@redhat.com Tested-by: Pucha Himasekhar Reddy himasekharx.reddy.pucha@intel.com (A Contingent worker at Intel) Signed-off-by: Jacob Keller jacob.e.keller@intel.com Link: https://lore.kernel.org/r/20231023212714.178032-1-jacob.e.keller@intel.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/i40e/i40e_txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c index 06987913837aa..6067c88668341 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -2669,7 +2669,7 @@ int i40e_napi_poll(struct napi_struct *napi, int budget) return budget; }

- if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR) + if (q_vector->tx.ring[0].flags & I40E_TXR_FLAGS_WB_ON_ITR) q_vector->arm_wb_state = false;

/* Exit the polling mode, but don't re-enable interrupts if stack might

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lukasz Majczak lma@semihalf.com

commit 3d887d512494d678b17c57b835c32f4e48d34f26 upstream.

As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following:

[12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30

As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop.

Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Lukasz Majczak lma@semihalf.com Reviewed-by: Radoslaw Biernacki rad@chromium.org Signed-off-by: Manasi Navare navaremanasi@chromium.org Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@sem... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/drm_dp_mst_topology.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1806,14 +1806,14 @@ static struct drm_dp_mst_branch *get_mst struct drm_dp_mst_branch *found_mstb; struct drm_dp_mst_port *port;

+ if (!mstb) + return NULL; + if (memcmp(mstb->guid, guid, 16) == 0) return mstb;

list_for_each_entry(port, &mstb->ports, next) { - if (!port->mstb) - continue; - found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid);

if (found_mstb)

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Hai wanghai38@huawei.com

commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 upstream.

In kobject_get_path(), if kobj->name is changed between calls get_kobj_path_length() and fill_kobj_path() and the length becomes longer, then fill_kobj_path() will have an out-of-bounds bug.

The actual current problem occurs when the ixgbe probe.

In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name length becomes longer, out-of-bounds will occur.

cpu0 cpu1 ixgbe_probe register_netdev(netdev) netdev_register_kobject device_add kobject_uevent // Sending ADD events systemd-udevd // rename netdev dev_change_name device_rename kobject_rename ixgbe_mii_bus_init | mdiobus_register | __mdiobus_register | device_register | device_add | kobject_uevent | kobject_get_path | len = get_kobj_path_length // old name | path = kzalloc(len, gfp_mask); | kobj->name = name; /* name length becomes * longer */ fill_kobj_path /* kobj path length is * longer than path, * resulting in out of * bounds when filling path */

This is the kasan report:

================================================================== BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0 Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673

Workqueue: events work_for_cpu_fn Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x86/0x1e7 print_report+0x36/0x4f kasan_report+0xad/0x130 kasan_check_range+0x35/0x1c0 memcpy+0x39/0x60 fill_kobj_path+0x50/0xc0 kobject_get_path+0x5a/0xc0 kobject_uevent_env+0x140/0x460 device_add+0x5c7/0x910 __mdiobus_register+0x14e/0x490 ixgbe_probe.cold+0x441/0x574 [ixgbe] local_pci_probe+0x78/0xc0 work_for_cpu_fn+0x26/0x40 process_one_work+0x3b6/0x6a0 worker_thread+0x368/0x520 kthread+0x165/0x1a0 ret_from_fork+0x1f/0x30

This reproducer triggers that bug:

while: do rmmod ixgbe sleep 0.5 modprobe ixgbe sleep 0.5

When calling fill_kobj_path() to fill path, if the name length of kobj becomes longer, return failure and retry. This fixes the problem.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai wanghai38@huawei.com Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com Signed-off-by: Oleksandr Tymoshenko ovt@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- lib/kobject.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/lib/kobject.c +++ b/lib/kobject.c @@ -144,7 +144,7 @@ static int get_kobj_path_length(struct k return length; }

-static void fill_kobj_path(struct kobject *kobj, char *path, int length) +static int fill_kobj_path(struct kobject *kobj, char *path, int length) { struct kobject *parent;

@@ -153,12 +153,16 @@ static void fill_kobj_path(struct kobjec int cur = strlen(kobject_name(parent)); /* back up enough to print this name with '/' */ length -= cur; + if (length <= 0) + return -EINVAL; memcpy(path + length, kobject_name(parent), cur); *(path + --length) = '/'; }

pr_debug("kobject: '%s' (%p): %s: path = '%s'\n", kobject_name(kobj), kobj, __func__, path); + + return 0; }

/** @@ -173,13 +177,17 @@ char *kobject_get_path(struct kobject *k char *path; int len;

+retry: len = get_kobj_path_length(kobj); if (len == 0) return NULL; path = kzalloc(len, gfp_mask); if (!path) return NULL; - fill_kobj_path(kobj, path, len); + if (fill_kobj_path(kobj, path, len)) { + kfree(path); + goto retry; + }

return path; }

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chao Yu chao@kernel.org

commit 9056d6489f5a41cfbb67f719d2c0ce61ead72d9f upstream.

As report by Wenqing Liu in bugzilla:

https://bugzilla.kernel.org/show_bug.cgi?id=215231

- Overview kernel NULL pointer dereference triggered in folio_mark_dirty() when mount and operate on a crafted f2fs image

- Reproduce tested on kernel 5.16-rc3, 5.15.X under root

1. mkdir mnt 2. mount -t f2fs tmp1.img mnt 3. touch tmp 4. cp tmp mnt

F2FS-fs (loop0): sanity_check_inode: inode (ino=49) extent info [5942, 4294180864, 4] is incorrect, run fsck to fix F2FS-fs (loop0): f2fs_check_nid_range: out-of-range nid=31340049, run fsck to fix. BUG: kernel NULL pointer dereference, address: 0000000000000000 folio_mark_dirty+0x33/0x50 move_data_page+0x2dd/0x460 [f2fs] do_garbage_collect+0xc18/0x16a0 [f2fs] f2fs_gc+0x1d3/0xd90 [f2fs] f2fs_balance_fs+0x13a/0x570 [f2fs] f2fs_create+0x285/0x840 [f2fs] path_openat+0xe6d/0x1040 do_filp_open+0xc5/0x140 do_sys_openat2+0x23a/0x310 do_sys_open+0x57/0x80

The root cause is for special file: e.g. character, block, fifo or socket file, f2fs doesn't assign address space operations pointer array for mapping->a_ops field, so, in a fuzzed image, SSA table indicates a data block belong to special file, when f2fs tries to migrate that block, it causes NULL pointer access once move_data_page() calls a_ops->set_dirty_page().

Cc: stable@vger.kernel.org Reported-by: Wenqing Liu wenqingliu0120@gmail.com Signed-off-by: Chao Yu chao@kernel.org Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Kazunori Kobayashi kazunori.kobayashi@miraclelinux.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/f2fs/gc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -1069,7 +1069,8 @@ next_step:

if (phase == 3) { inode = f2fs_iget(sb, dni.ino); - if (IS_ERR(inode) || is_bad_inode(inode)) + if (IS_ERR(inode) || is_bad_inode(inode) || + special_file(inode->i_mode)) continue;

if (!down_write_trylock(

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Josh Poimboeuf jpoimboe@redhat.com

commit a1e2c031ec3949b8c039b739c0b5bf9c30007b00 upstream.

RESERVE_BRK() reserves data in the .brk_reservation section. The data is initialized to zero, like BSS, so the macro specifies 'nobits' to prevent the data from taking up space in the vmlinux binary. The only way to get the compiler to do that (without putting the variable in .bss proper) is to use inline asm.

The macro also has a hack which encloses the inline asm in a discarded function, which allows the size to be passed (global inline asm doesn't allow inputs).

Remove the need for the discarded function hack by just stringifying the size rather than supplying it as an input to the inline asm.

Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Borislav Petkov bp@suse.de Reviewed-by: Borislav Petkov bp@suse.de Link: https://lore.kernel.org/r/20220506121631.133110232@infradead.org [nathan: Fix conflict due to lack of 2b6ff7dea670 and 33def8498fdd] Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/include/asm/setup.h | 30 +++++++++++------------------- 1 file changed, 11 insertions(+), 19 deletions(-)

--- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -94,27 +94,19 @@ extern unsigned long _brk_end; void *extend_brk(size_t size, size_t align);

/* - * Reserve space in the brk section. The name must be unique within - * the file, and somewhat descriptive. The size is in bytes. Must be - * used at file scope. + * Reserve space in the brk section. The name must be unique within the file, + * and somewhat descriptive. The size is in bytes. * - * (This uses a temp function to wrap the asm so we can pass it the - * size parameter; otherwise we wouldn't be able to. We can't use a - * "section" attribute on a normal variable because it always ends up - * being @progbits, which ends up allocating space in the vmlinux - * executable.) + * The allocation is done using inline asm (rather than using a section + * attribute on a normal variable) in order to allow the use of @nobits, so + * that it doesn't take up any space in the vmlinux file. */ -#define RESERVE_BRK(name,sz) \ - static void __section(.discard.text) __used notrace \ - __brk_reservation_fn_##name##__(void) { \ - asm volatile ( \ - ".pushsection .brk_reservation,"aw",@nobits;" \ - ".brk." #name ":" \ - " 1:.skip %c0;" \ - " .size .brk." #name ", . - 1b;" \ - " .popsection" \ - : : "i" (sz)); \ - } +#define RESERVE_BRK(name, size) \ + asm(".pushsection .brk_reservation,"aw",@nobits\n\t" \ + ".brk." #name ":\n\t" \ + ".skip " __stringify(size) "\n\t" \ + ".size .brk." #name ", " __stringify(size) "\n\t" \ + ".popsection\n\t")

/* Helper for reserving space for arrays of things */ #define RESERVE_BRK_ARRAY(type, name, entries) \

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baokun Li libaokun1@huawei.com

commit 43bbddc067883d94de7a43d5756a295439fbe37d upstream.

When we use lstart + len to calculate the end of free extent or prealloc space, it may exceed the maximum value of 4294967295(0xffffffff) supported by ext4_lblk_t and cause overflow, which may lead to various problems.

Therefore, we add two helper functions, extent_logical_end() and pa_logical_end(), to limit the type of end to loff_t, and also convert lstart to loff_t for calculation to avoid overflow.

Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Link: https://lore.kernel.org/r/20230724121059.11834-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Baokun Li libaokun1@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/mballoc.c | 7 +++---- fs/ext4/mballoc.h | 14 ++++++++++++++ 2 files changed, 17 insertions(+), 4 deletions(-)

--- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3124,7 +3124,7 @@ ext4_mb_normalize_request(struct ext4_al

/* first, let's learn actual file size * given current request is allocated */ - size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len); + size = extent_logical_end(sbi, &ac->ac_o_ex); size = size << bsbits; if (size < i_size_read(ac->ac_inode)) size = i_size_read(ac->ac_inode); @@ -3462,8 +3462,7 @@ ext4_mb_use_preallocated(struct ext4_all /* all fields in this condition don't change, * so we can skip locking for them */ if (ac->ac_o_ex.fe_logical < pa->pa_lstart || - ac->ac_o_ex.fe_logical >= (pa->pa_lstart + - EXT4_C2B(sbi, pa->pa_len))) + ac->ac_o_ex.fe_logical >= pa_logical_end(sbi, pa)) continue;

/* non-extent files can't have physical blocks past 2^32 */ @@ -4234,7 +4233,7 @@ static void ext4_mb_group_or_file(struct if (unlikely(ac->ac_flags & EXT4_MB_HINT_GOAL_ONLY)) return;

- size = ac->ac_o_ex.fe_logical + EXT4_C2B(sbi, ac->ac_o_ex.fe_len); + size = extent_logical_end(sbi, &ac->ac_o_ex); isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1) >> bsbits;

--- a/fs/ext4/mballoc.h +++ b/fs/ext4/mballoc.h @@ -199,6 +199,20 @@ static inline ext4_fsblk_t ext4_grp_offs (fex->fe_start << EXT4_SB(sb)->s_cluster_bits); }

+static inline loff_t extent_logical_end(struct ext4_sb_info *sbi, + struct ext4_free_extent *fex) +{ + /* Use loff_t to avoid end exceeding ext4_lblk_t max. */ + return (loff_t)fex->fe_logical + EXT4_C2B(sbi, fex->fe_len); +} + +static inline loff_t pa_logical_end(struct ext4_sb_info *sbi, + struct ext4_prealloc_space *pa) +{ + /* Use loff_t to avoid end exceeding ext4_lblk_t max. */ + return (loff_t)pa->pa_lstart + EXT4_C2B(sbi, pa->pa_len); +} + typedef int (*ext4_mballoc_query_range_fn)( struct super_block *sb, ext4_group_t agno,

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Baokun Li libaokun1@huawei.com

commit bc056e7163ac7db945366de219745cf94f32a3e6 upstream.

When we calculate the end position of ext4_free_extent, this position may be exactly where ext4_lblk_t (i.e. uint) overflows. For example, if ac_g_ex.fe_logical is 4294965248 and ac_orig_goal_len is 2048, then the computed end is 0x100000000, which is 0. If ac->ac_o_ex.fe_logical is not the first case of adjusting the best extent, that is, new_bex_end > 0, the following BUG_ON will be triggered:

========================================================= kernel BUG at fs/ext4/mballoc.c:5116! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 673 Comm: xfs_io Tainted: G E 6.5.0-rc1+ #279 RIP: 0010:ext4_mb_new_inode_pa+0xc5/0x430 Call Trace: <TASK> ext4_mb_use_best_found+0x203/0x2f0 ext4_mb_try_best_found+0x163/0x240 ext4_mb_regular_allocator+0x158/0x1550 ext4_mb_new_blocks+0x86a/0xe10 ext4_ext_map_blocks+0xb0c/0x13a0 ext4_map_blocks+0x2cd/0x8f0 ext4_iomap_begin+0x27b/0x400 iomap_iter+0x222/0x3d0 __iomap_dio_rw+0x243/0xcb0 iomap_dio_rw+0x16/0x80 =========================================================

A simple reproducer demonstrating the problem:

mkfs.ext4 -F /dev/sda -b 4096 100M mount /dev/sda /tmp/test fallocate -l1M /tmp/test/tmp fallocate -l10M /tmp/test/file fallocate -i -o 1M -l16777203M /tmp/test/file fsstress -d /tmp/test -l 0 -n 100000 -p 8 & sleep 10 && killall -9 fsstress rm -f /tmp/test/tmp xfs_io -c "open -ad /tmp/test/file" -c "pwrite -S 0xff 0 8192"

We simply refactor the logic for adjusting the best extent by adding a temporary ext4_free_extent ex and use extent_logical_end() to avoid overflow, which also simplifies the code.

Cc: stable@kernel.org # 6.4 Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Link: https://lore.kernel.org/r/20230724121059.11834-3-libaokun1@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Baokun Li libaokun1@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/mballoc.c | 31 ++++++++++++++----------------- 1 file changed, 14 insertions(+), 17 deletions(-)

--- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3680,8 +3680,11 @@ ext4_mb_new_inode_pa(struct ext4_allocat return -ENOMEM;

if (ac->ac_b_ex.fe_len < ac->ac_g_ex.fe_len) { - int new_bex_start; - int new_bex_end; + struct ext4_free_extent ex = { + .fe_logical = ac->ac_g_ex.fe_logical, + .fe_len = ac->ac_g_ex.fe_len, + }; + loff_t orig_goal_end = extent_logical_end(sbi, &ex);

/* we can't allocate as much as normalizer wants. * so, found space must get proper lstart @@ -3700,29 +3703,23 @@ ext4_mb_new_inode_pa(struct ext4_allocat * still cover original start * 3. Else, keep the best ex at start of original request. */ - new_bex_end = ac->ac_g_ex.fe_logical + - EXT4_C2B(sbi, ac->ac_g_ex.fe_len); - new_bex_start = new_bex_end - EXT4_C2B(sbi, ac->ac_b_ex.fe_len); - if (ac->ac_o_ex.fe_logical >= new_bex_start) - goto adjust_bex; + ex.fe_len = ac->ac_b_ex.fe_len;

- new_bex_start = ac->ac_g_ex.fe_logical; - new_bex_end = - new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len); - if (ac->ac_o_ex.fe_logical < new_bex_end) + ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len); + if (ac->ac_o_ex.fe_logical >= ex.fe_logical) goto adjust_bex;

- new_bex_start = ac->ac_o_ex.fe_logical; - new_bex_end = - new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len); + ex.fe_logical = ac->ac_g_ex.fe_logical; + if (ac->ac_o_ex.fe_logical < extent_logical_end(sbi, &ex)) + goto adjust_bex;

+ ex.fe_logical = ac->ac_o_ex.fe_logical; adjust_bex: - ac->ac_b_ex.fe_logical = new_bex_start; + ac->ac_b_ex.fe_logical = ex.fe_logical;

BUG_ON(ac->ac_o_ex.fe_logical < ac->ac_b_ex.fe_logical); BUG_ON(ac->ac_o_ex.fe_len > ac->ac_b_ex.fe_len); - BUG_ON(new_bex_end > (ac->ac_g_ex.fe_logical + - EXT4_C2B(sbi, ac->ac_g_ex.fe_len))); + BUG_ON(extent_logical_end(sbi, &ex) > orig_goal_end); }

/* preallocation can change ac_b_ex, thus we store actually

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

commit e5f89131a06142e91073b6959d91cea73861d40e upstream.

Memory pointed by variable 'old' in field store macro is not modified, so it can be made a pointer to const.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20220419113435.246203-12-krzysztof.kozlowski@linar... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Lee Jones lee@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/rpmsg/rpmsg_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/rpmsg/rpmsg_core.c +++ b/drivers/rpmsg/rpmsg_core.c @@ -332,7 +332,8 @@ field##_store(struct device *dev, struct const char *buf, size_t sz) \ { \ struct rpmsg_device *rpdev = to_rpmsg_device(dev); \ - char *new, *old; \ + const char *old; \ + char *new; \ \ new = kstrndup(buf, sz, GFP_KERNEL); \ if (!new) \

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

commit bb17d110cbf270d5247a6e261c5ad50e362d1675 upstream.

driver_set_override() helper uses device_lock() so it should not be called before rpmsg_register_device() (which calls device_register()). Effect can be seen with CONFIG_DEBUG_MUTEXES:

DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 57 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x430 ... Call trace: __mutex_lock+0x1ec/0x430 mutex_lock_nested+0x44/0x50 driver_set_override+0x124/0x150 qcom_glink_native_probe+0x30c/0x3b0 glink_rpm_probe+0x274/0x350 platform_probe+0x6c/0xe0 really_probe+0x17c/0x3d0 __driver_probe_device+0x114/0x190 driver_probe_device+0x3c/0xf0 ...

Refactor the rpmsg_register_device() function to use two-step device registering (initialization + add) and call driver_set_override() in proper moment.

This moves the code around, so while at it also NULL-ify the rpdev->driver_override in error path to be sure it won't be kfree() second time.

Fixes: 42cd402b8fd4 ("rpmsg: Fix kfree() of static memory on setting driver_override") Reported-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Tested-by: Marek Szyprowski m.szyprowski@samsung.com Link: https://lore.kernel.org/r/20220429195946.1061725-2-krzysztof.kozlowski@linar... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Lee Jones lee@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/rpmsg/rpmsg_core.c | 33 ++++++++++++++++++++++++++++++--- drivers/rpmsg/rpmsg_internal.h | 14 +------------- include/linux/rpmsg.h | 8 ++++++++ 3 files changed, 39 insertions(+), 16 deletions(-)

--- a/drivers/rpmsg/rpmsg_core.c +++ b/drivers/rpmsg/rpmsg_core.c @@ -526,24 +526,51 @@ static struct bus_type rpmsg_bus = { .remove = rpmsg_dev_remove, };

-int rpmsg_register_device(struct rpmsg_device *rpdev) +/* + * A helper for registering rpmsg device with driver override and name. + * Drivers should not be using it, but instead rpmsg_register_device(). + */ +int rpmsg_register_device_override(struct rpmsg_device *rpdev, + const char *driver_override) { struct device *dev = &rpdev->dev; int ret;

+ if (driver_override) + strcpy(rpdev->id.name, driver_override); + dev_set_name(&rpdev->dev, "%s.%s.%d.%d", dev_name(dev->parent), rpdev->id.name, rpdev->src, rpdev->dst);

rpdev->dev.bus = &rpmsg_bus;

- ret = device_register(&rpdev->dev); + device_initialize(dev); + if (driver_override) { + ret = driver_set_override(dev, &rpdev->driver_override, + driver_override, + strlen(driver_override)); + if (ret) { + dev_err(dev, "device_set_override failed: %d\n", ret); + return ret; + } + } + + ret = device_add(dev); if (ret) { - dev_err(dev, "device_register failed: %d\n", ret); + dev_err(dev, "device_add failed: %d\n", ret); + kfree(rpdev->driver_override); + rpdev->driver_override = NULL; put_device(&rpdev->dev); }

return ret; } +EXPORT_SYMBOL(rpmsg_register_device_override); + +int rpmsg_register_device(struct rpmsg_device *rpdev) +{ + return rpmsg_register_device_override(rpdev, NULL); +} EXPORT_SYMBOL(rpmsg_register_device);

/* --- a/drivers/rpmsg/rpmsg_internal.h +++ b/drivers/rpmsg/rpmsg_internal.h @@ -84,19 +84,7 @@ struct device *rpmsg_find_device(struct */ static inline int rpmsg_chrdev_register_device(struct rpmsg_device *rpdev) { - int ret; - - strcpy(rpdev->id.name, "rpmsg_chrdev"); - ret = driver_set_override(&rpdev->dev, &rpdev->driver_override, - rpdev->id.name, strlen(rpdev->id.name)); - if (ret) - return ret; - - ret = rpmsg_register_device(rpdev); - if (ret) - kfree(rpdev->driver_override); - - return ret; + return rpmsg_register_device_override(rpdev, "rpmsg_ctrl"); }

#endif --- a/include/linux/rpmsg.h +++ b/include/linux/rpmsg.h @@ -115,6 +115,8 @@ struct rpmsg_driver {

#if IS_ENABLED(CONFIG_RPMSG)

+int rpmsg_register_device_override(struct rpmsg_device *rpdev, + const char *driver_override); int register_rpmsg_device(struct rpmsg_device *dev); void unregister_rpmsg_device(struct rpmsg_device *dev); int __register_rpmsg_driver(struct rpmsg_driver *drv, struct module *owner); @@ -139,6 +141,12 @@ __poll_t rpmsg_poll(struct rpmsg_endpoin

#else

+static inline int rpmsg_register_device_override(struct rpmsg_device *rpdev, + const char *driver_override) +{ + return -ENXIO; +} + static inline int register_rpmsg_device(struct rpmsg_device *dev) { return -ENXIO;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hangyu Hua hbh25y@gmail.com

commit d7bd416d35121c95fe47330e09a5c04adbc5f928 upstream.

rpmsg_register_device_override need to call put_device to free vch when driver_set_override fails.

Fix this by adding a put_device() to the error path.

Fixes: bb17d110cbf2 ("rpmsg: Fix calling device_lock() on non-initialized device") Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: Hangyu Hua hbh25y@gmail.com Link: https://lore.kernel.org/r/20220624024120.11576-1-hbh25y@gmail.com Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Lee Jones lee@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/rpmsg/rpmsg_core.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/rpmsg/rpmsg_core.c +++ b/drivers/rpmsg/rpmsg_core.c @@ -551,6 +551,7 @@ int rpmsg_register_device_override(struc strlen(driver_override)); if (ret) { dev_err(dev, "device_set_override failed: %d\n", ret); + put_device(dev); return ret; } }

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Szilard Fabian szfabian@bluemarch.art

[ Upstream commit 80f39e1c27ba9e5a1ea7e68e21c569c9d8e46062 ]

In the initial boot stage the integrated keyboard of Fujitsu Lifebook E5411 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:308A) not working at all.

Since the integrated touchpad is managed by the i2c_designware input driver in the Linux kernel and you can't find a PS/2 mouse port on the computer I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian szfabian@bluemarch.art Link: https://lore.kernel.org/r/20231004011749.101789-1-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/serio/i8042-x86ia64io.h | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 700655741bf28..5df6eef18228d 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -609,6 +609,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { }, .driver_data = (void *)(SERIO_QUIRK_NOMUX) }, + { + /* Fujitsu Lifebook E5411 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU CLIENT COMPUTING LIMITED"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E5411"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOAUX) + }, { /* Gigabyte M912 */ .matches = {

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zhang Shurong zhang_shurong@foxmail.com

[ Upstream commit 0618c077a8c20e8c81e367988f70f7e32bb5a717 ]

The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. We fix it by calling pm_runtime_disable when error returns.

Signed-off-by: Zhang Shurong zhang_shurong@foxmail.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Link: https://lore.kernel.org/r/tencent_DD2D371DB5925B4B602B1E1D0A5FA88F1208@qq.co... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/ste_dma40.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 96a808b487cbe..fa0ad8581edcc 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -3700,6 +3700,7 @@ static int __init d40_probe(struct platform_device *pdev) regulator_disable(base->lcpa_regulator); regulator_put(base->lcpa_regulator); } + pm_runtime_disable(base->dev);

kfree(base->lcla_pool.alloc_map); kfree(base->lookup_log_chans);

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann arnd@arndb.de

[ Upstream commit c1a8d1d0edb71dec15c9649cb56866c71c1ecd9e ]

ioremap_uc() is only meaningful on old x86-32 systems with the PAT extension, and on ia64 with its slightly unconventional ioremap() behavior, everywhere else this is the same as ioremap() anyway.

Change the only driver that still references ioremap_uc() to only do so on x86-32/ia64 in order to allow removing that interface at some point in the future for the other architectures.

On some architectures, ioremap_uc() just returns NULL, changing the driver to call ioremap() means that they now have a chance of working correctly.

Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Baoquan He bhe@redhat.com Reviewed-by: Luis Chamberlain mcgrof@kernel.org Cc: Helge Deller deller@gmx.de Cc: Thomas Zimmermann tzimmermann@suse.de Cc: Christophe Leroy christophe.leroy@csgroup.eu Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/aty/atyfb_base.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/video/fbdev/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c index 6dda5d885a03b..bb9ecf12e7630 100644 --- a/drivers/video/fbdev/aty/atyfb_base.c +++ b/drivers/video/fbdev/aty/atyfb_base.c @@ -3410,11 +3410,15 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info, }

info->fix.mmio_start = raddr; +#if defined(__i386__) || defined(__ia64__) /* * By using strong UC we force the MTRR to never have an * effect on the MMIO region on both non-PAT and PAT systems. */ par->ati_regbase = ioremap_uc(info->fix.mmio_start, 0x1000); +#else + par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000); +#endif if (par->ati_regbase == NULL) return -ENOMEM;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Westphal fw@strlen.de

[ Upstream commit 2e1d175410972285333193837a4250a74cd472e6 ]

net/netfilter/nfnetlink_log.c:800:18: warning: variable 'ctinfo' is uninitialized

The warning is bogus, the variable is only used if ct is non-NULL and always initialised in that case. Init to 0 too to silence this.

Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202309100514.ndBFebXN-lkp@intel.com/ Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nfnetlink_log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index f087baa95b07b..80c09070ea9fa 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -683,8 +683,8 @@ nfulnl_log_packet(struct net *net, unsigned int plen = 0; struct nfnl_log_net *log = nfnl_log_pernet(net); const struct nfnl_ct_hook *nfnl_ct = NULL; + enum ip_conntrack_info ctinfo = 0; struct nf_conn *ct = NULL; - enum ip_conntrack_info ctinfo;

if (li_user && li_user->type == NF_LOG_TYPE_ULOG) li = li_user;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jorge Maidana jorgem.linux@gmail.com

[ Upstream commit 1022e7e2f40574c74ed32c3811b03d26b0b81daf ]

Delete the v86d netlink only after all the VBE tasks have been completed.

Fixes initial state restore on module unload: uvesafb: VBE state restore call failed (eax=0x4f04, err=-19)

Signed-off-by: Jorge Maidana jorgem.linux@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/uvesafb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/uvesafb.c b/drivers/video/fbdev/uvesafb.c index 7d3af1d19ad3f..115653ba761c0 100644 --- a/drivers/video/fbdev/uvesafb.c +++ b/drivers/video/fbdev/uvesafb.c @@ -1933,10 +1933,10 @@ static void uvesafb_exit(void) } }

- cn_del_callback(&uvesafb_cn_id); driver_remove_file(&uvesafb_driver.driver, &driver_attr_v86d); platform_device_unregister(uvesafb_device); platform_driver_unregister(&uvesafb_driver); + cn_del_callback(&uvesafb_cn_id); }

module_exit(uvesafb_exit);

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit f37cc2fc277b371fc491890afb7d8a26e36bb3a1 ]

Older Asus laptops change the backlight level themselves and then send WMI events with different codes for different backlight levels.

The asus-wmi.c code maps the entire range of codes reported on brightness down keypresses to an internal ASUS_WMI_BRN_DOWN code:

define NOTIFY_BRNUP_MIN 0x11 define NOTIFY_BRNUP_MAX 0x1f define NOTIFY_BRNDOWN_MIN 0x20 define NOTIFY_BRNDOWN_MAX 0x2e

if (code >= NOTIFY_BRNUP_MIN && code <= NOTIFY_BRNUP_MAX) code = ASUS_WMI_BRN_UP; else if (code >= NOTIFY_BRNDOWN_MIN && code <= NOTIFY_BRNDOWN_MAX) code = ASUS_WMI_BRN_DOWN;

Before this commit all the NOTIFY_BRNDOWN_MIN - NOTIFY_BRNDOWN_MAX aka 0x20 - 0x2e events were mapped to 0x20.

This mapping is causing issues on new laptop models which actually send 0x2b events for printscreen presses and 0x2c events for capslock presses, which get translated into spurious brightness-down presses.

The plan is disable the 0x11-0x2e special mapping on laptops where asus-wmi does not register a backlight-device to avoid the spurious brightness-down keypresses. New laptops always send 0x2e for brightness-down presses, change the special internal ASUS_WMI_BRN_DOWN value from 0x20 to 0x2e to match this in preparation for fixing the spurious brightness-down presses.

This change does not have any functional impact since all of 0x20 - 0x2e is mapped to ASUS_WMI_BRN_DOWN first and only then checked against the keymap code and the new 0x2e value is still in the 0x20 - 0x2e range.

Reported-by: James John me@donjajo.com Closes: https://lore.kernel.org/platform-driver-x86/a2c441fe-457e-44cf-a146-0ecd86b0... Closes: https://bbs.archlinux.org/viewtopic.php?pid=2123716 Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20231017090725.38163-2-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/asus-wmi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h index 4f31b68642a08..6faf213f687a3 100644 --- a/drivers/platform/x86/asus-wmi.h +++ b/drivers/platform/x86/asus-wmi.h @@ -18,7 +18,7 @@ #include <linux/i8042.h>

#define ASUS_WMI_KEY_IGNORE (-1) -#define ASUS_WMI_BRN_DOWN 0x20 +#define ASUS_WMI_BRN_DOWN 0x2e #define ASUS_WMI_BRN_UP 0x2f

struct module;

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Su Hui suhui@nfschina.com

[ Upstream commit 9f771493da935299c6393ad3563b581255d01a37 ]

t4_set_params_timeout() can return -EINVAL if failed, add check for this.

Signed-off-by: Su Hui suhui@nfschina.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index 42374859b9d35..cb3f515559c27 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3850,6 +3850,8 @@ int t4_load_phy_fw(struct adapter *adap, FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD)); ret = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1, &param, &val, 30000); + if (ret) + return ret;

/* If we have version number support, then check to see that the new * firmware got loaded properly.

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoph Hellwig hch@lst.de

commit d13bc4d84a8e91060d3797fc95c1a0202bfd1499 upstream.

This driver is for fairly obscure hardware, and has only seen random drive-by changes after the maintainer stopped working on it in 2005 (about a year and a half after it was introduced). It has some "interesting" block layer interactions, so let's just drop it unless anyone complains.

Signed-off-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20220721064102.1715460-1-hch@lst.de [axboe: fix date typo, it was in 2005, not 2015] Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/block/Kconfig | 9 drivers/block/Makefile | 2 drivers/block/sx8.c | 1586 ------------------------------------------------- 3 files changed, 1597 deletions(-) delete mode 100644 drivers/block/sx8.c

--- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -299,15 +299,6 @@ config BLK_DEV_SKD

Use device /dev/skd$N amd /dev/skd$Np$M.

-config BLK_DEV_SX8 - tristate "Promise SATA SX8 support" - depends on PCI - ---help--- - Saying Y or M here will enable support for the - Promise SATA SX8 controllers. - - Use devices /dev/sx8/$N and /dev/sx8/$Np$M. - config BLK_DEV_RAM tristate "RAM block device support" ---help--- --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -26,8 +26,6 @@ obj-$(CONFIG_BLK_DEV_NBD) += nbd.o obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o

-obj-$(CONFIG_BLK_DEV_SX8) += sx8.o - obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o obj-$(CONFIG_XEN_BLKDEV_BACKEND) += xen-blkback/ obj-$(CONFIG_BLK_DEV_DRBD) += drbd/ --- a/drivers/block/sx8.c +++ /dev/null @@ -1,1586 +0,0 @@ -/* - * sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware - * - * Copyright 2004-2005 Red Hat, Inc. - * - * Author/maintainer: Jeff Garzik jgarzik@pobox.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/blk-mq.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/compiler.h> -#include <linux/workqueue.h> -#include <linux/bitops.h> -#include <linux/delay.h> -#include <linux/ktime.h> -#include <linux/hdreg.h> -#include <linux/dma-mapping.h> -#include <linux/completion.h> -#include <linux/scatterlist.h> -#include <asm/io.h> -#include <linux/uaccess.h> - -#if 0 -#define CARM_DEBUG -#define CARM_VERBOSE_DEBUG -#else -#undef CARM_DEBUG -#undef CARM_VERBOSE_DEBUG -#endif -#undef CARM_NDEBUG - -#define DRV_NAME "sx8" -#define DRV_VERSION "1.0" -#define PFX DRV_NAME ": " - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Promise SATA SX8 block driver"); -MODULE_VERSION(DRV_VERSION); - -/* - * SX8 hardware has a single message queue for all ATA ports. - * When this driver was written, the hardware (firmware?) would - * corrupt data eventually, if more than one request was outstanding. - * As one can imagine, having 8 ports bottlenecking on a single - * command hurts performance. - * - * Based on user reports, later versions of the hardware (firmware?) - * seem to be able to survive with more than one command queued. - * - * Therefore, we default to the safe option -- 1 command -- but - * allow the user to increase this. - * - * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ), - * but problems seem to occur when you exceed ~30, even on newer hardware. - */ -static int max_queue = 1; -module_param(max_queue, int, 0444); -MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)"); - - -#define NEXT_RESP(idx) ((idx + 1) % RMSG_Q_LEN) - -/* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */ -#define TAG_ENCODE(tag) (((tag) << 16) | 0xf) -#define TAG_DECODE(tag) (((tag) >> 16) & 0x1f) -#define TAG_VALID(tag) ((((tag) & 0xf) == 0xf) && (TAG_DECODE(tag) < 32)) - -/* note: prints function name for you */ -#ifdef CARM_DEBUG -#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) -#ifdef CARM_VERBOSE_DEBUG -#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) -#else -#define VPRINTK(fmt, args...) -#endif /* CARM_VERBOSE_DEBUG */ -#else -#define DPRINTK(fmt, args...) -#define VPRINTK(fmt, args...) -#endif /* CARM_DEBUG */ - -#ifdef CARM_NDEBUG -#define assert(expr) -#else -#define assert(expr) \ - if(unlikely(!(expr))) { \ - printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } -#endif - -/* defines only for the constants which don't work well as enums */ -struct carm_host; - -enum { - /* adapter-wide limits */ - CARM_MAX_PORTS = 8, - CARM_SHM_SIZE = (4096 << 7), - CARM_MINORS_PER_MAJOR = 256 / CARM_MAX_PORTS, - CARM_MAX_WAIT_Q = CARM_MAX_PORTS + 1, - - /* command message queue limits */ - CARM_MAX_REQ = 64, /* max command msgs per host */ - CARM_MSG_LOW_WATER = (CARM_MAX_REQ / 4), /* refill mark */ - - /* S/G limits, host-wide and per-request */ - CARM_MAX_REQ_SG = 32, /* max s/g entries per request */ - CARM_MAX_HOST_SG = 600, /* max s/g entries per host */ - CARM_SG_LOW_WATER = (CARM_MAX_HOST_SG / 4), /* re-fill mark */ - - /* hardware registers */ - CARM_IHQP = 0x1c, - CARM_INT_STAT = 0x10, /* interrupt status */ - CARM_INT_MASK = 0x14, /* interrupt mask */ - CARM_HMUC = 0x18, /* host message unit control */ - RBUF_ADDR_LO = 0x20, /* response msg DMA buf low 32 bits */ - RBUF_ADDR_HI = 0x24, /* response msg DMA buf high 32 bits */ - RBUF_BYTE_SZ = 0x28, - CARM_RESP_IDX = 0x2c, - CARM_CMS0 = 0x30, /* command message size reg 0 */ - CARM_LMUC = 0x48, - CARM_HMPHA = 0x6c, - CARM_INITC = 0xb5, - - /* bits in CARM_INT_{STAT,MASK} */ - INT_RESERVED = 0xfffffff0, - INT_WATCHDOG = (1 << 3), /* watchdog timer */ - INT_Q_OVERFLOW = (1 << 2), /* cmd msg q overflow */ - INT_Q_AVAILABLE = (1 << 1), /* cmd msg q has free space */ - INT_RESPONSE = (1 << 0), /* response msg available */ - INT_ACK_MASK = INT_WATCHDOG | INT_Q_OVERFLOW, - INT_DEF_MASK = INT_RESERVED | INT_Q_OVERFLOW | - INT_RESPONSE, - - /* command messages, and related register bits */ - CARM_HAVE_RESP = 0x01, - CARM_MSG_READ = 1, - CARM_MSG_WRITE = 2, - CARM_MSG_VERIFY = 3, - CARM_MSG_GET_CAPACITY = 4, - CARM_MSG_FLUSH = 5, - CARM_MSG_IOCTL = 6, - CARM_MSG_ARRAY = 8, - CARM_MSG_MISC = 9, - CARM_CME = (1 << 2), - CARM_RME = (1 << 1), - CARM_WZBC = (1 << 0), - CARM_RMI = (1 << 0), - CARM_Q_FULL = (1 << 3), - CARM_MSG_SIZE = 288, - CARM_Q_LEN = 48, - - /* CARM_MSG_IOCTL messages */ - CARM_IOC_SCAN_CHAN = 5, /* scan channels for devices */ - CARM_IOC_GET_TCQ = 13, /* get tcq/ncq depth */ - CARM_IOC_SET_TCQ = 14, /* set tcq/ncq depth */ - - IOC_SCAN_CHAN_NODEV = 0x1f, - IOC_SCAN_CHAN_OFFSET = 0x40, - - /* CARM_MSG_ARRAY messages */ - CARM_ARRAY_INFO = 0, - - ARRAY_NO_EXIST = (1 << 31), - - /* response messages */ - RMSG_SZ = 8, /* sizeof(struct carm_response) */ - RMSG_Q_LEN = 48, /* resp. msg list length */ - RMSG_OK = 1, /* bit indicating msg was successful */ - /* length of entire resp. msg buffer */ - RBUF_LEN = RMSG_SZ * RMSG_Q_LEN, - - PDC_SHM_SIZE = (4096 << 7), /* length of entire h/w buffer */ - - /* CARM_MSG_MISC messages */ - MISC_GET_FW_VER = 2, - MISC_ALLOC_MEM = 3, - MISC_SET_TIME = 5, - - /* MISC_GET_FW_VER feature bits */ - FW_VER_4PORT = (1 << 2), /* 1=4 ports, 0=8 ports */ - FW_VER_NON_RAID = (1 << 1), /* 1=non-RAID firmware, 0=RAID */ - FW_VER_ZCR = (1 << 0), /* zero channel RAID (whatever that is) */ - - /* carm_host flags */ - FL_NON_RAID = FW_VER_NON_RAID, - FL_4PORT = FW_VER_4PORT, - FL_FW_VER_MASK = (FW_VER_NON_RAID | FW_VER_4PORT), - FL_DYN_MAJOR = (1 << 17), -}; - -enum { - CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */ -}; - -enum scatter_gather_types { - SGT_32BIT = 0, - SGT_64BIT = 1, -}; - -enum host_states { - HST_INVALID, /* invalid state; never used */ - HST_ALLOC_BUF, /* setting up master SHM area */ - HST_ERROR, /* we never leave here */ - HST_PORT_SCAN, /* start dev scan */ - HST_DEV_SCAN_START, /* start per-device probe */ - HST_DEV_SCAN, /* continue per-device probe */ - HST_DEV_ACTIVATE, /* activate devices we found */ - HST_PROBE_FINISHED, /* probe is complete */ - HST_PROBE_START, /* initiate probe */ - HST_SYNC_TIME, /* tell firmware what time it is */ - HST_GET_FW_VER, /* get firmware version, adapter port cnt */ -}; - -#ifdef CARM_DEBUG -static const char *state_name[] = { - "HST_INVALID", - "HST_ALLOC_BUF", - "HST_ERROR", - "HST_PORT_SCAN", - "HST_DEV_SCAN_START", - "HST_DEV_SCAN", - "HST_DEV_ACTIVATE", - "HST_PROBE_FINISHED", - "HST_PROBE_START", - "HST_SYNC_TIME", - "HST_GET_FW_VER", -}; -#endif - -struct carm_port { - unsigned int port_no; - struct gendisk *disk; - struct carm_host *host; - - /* attached device characteristics */ - u64 capacity; - char name[41]; - u16 dev_geom_head; - u16 dev_geom_sect; - u16 dev_geom_cyl; -}; - -struct carm_request { - int n_elem; - unsigned int msg_type; - unsigned int msg_subtype; - unsigned int msg_bucket; - struct scatterlist sg[CARM_MAX_REQ_SG]; -}; - -struct carm_host { - unsigned long flags; - void __iomem *mmio; - void *shm; - dma_addr_t shm_dma; - - int major; - int id; - char name[32]; - - spinlock_t lock; - struct pci_dev *pdev; - unsigned int state; - u32 fw_ver; - - struct blk_mq_tag_set tag_set; - struct request_queue *oob_q; - unsigned int n_oob; - - unsigned int hw_sg_used; - - unsigned int resp_idx; - - unsigned int wait_q_prod; - unsigned int wait_q_cons; - struct request_queue *wait_q[CARM_MAX_WAIT_Q]; - - void *msg_base; - dma_addr_t msg_dma; - - int cur_scan_dev; - unsigned long dev_active; - unsigned long dev_present; - struct carm_port port[CARM_MAX_PORTS]; - - struct work_struct fsm_task; - - struct completion probe_comp; -}; - -struct carm_response { - __le32 ret_handle; - __le32 status; -} __attribute__((packed)); - -struct carm_msg_sg { - __le32 start; - __le32 len; -} __attribute__((packed)); - -struct carm_msg_rw { - u8 type; - u8 id; - u8 sg_count; - u8 sg_type; - __le32 handle; - __le32 lba; - __le16 lba_count; - __le16 lba_high; - struct carm_msg_sg sg[32]; -} __attribute__((packed)); - -struct carm_msg_allocbuf { - u8 type; - u8 subtype; - u8 n_sg; - u8 sg_type; - __le32 handle; - __le32 addr; - __le32 len; - __le32 evt_pool; - __le32 n_evt; - __le32 rbuf_pool; - __le32 n_rbuf; - __le32 msg_pool; - __le32 n_msg; - struct carm_msg_sg sg[8]; -} __attribute__((packed)); - -struct carm_msg_ioctl { - u8 type; - u8 subtype; - u8 array_id; - u8 reserved1; - __le32 handle; - __le32 data_addr; - u32 reserved2; -} __attribute__((packed)); - -struct carm_msg_sync_time { - u8 type; - u8 subtype; - u16 reserved1; - __le32 handle; - u32 reserved2; - __le32 timestamp; -} __attribute__((packed)); - -struct carm_msg_get_fw_ver { - u8 type; - u8 subtype; - u16 reserved1; - __le32 handle; - __le32 data_addr; - u32 reserved2; -} __attribute__((packed)); - -struct carm_fw_ver { - __le32 version; - u8 features; - u8 reserved1; - u16 reserved2; -} __attribute__((packed)); - -struct carm_array_info { - __le32 size; - - __le16 size_hi; - __le16 stripe_size; - - __le32 mode; - - __le16 stripe_blk_sz; - __le16 reserved1; - - __le16 cyl; - __le16 head; - - __le16 sect; - u8 array_id; - u8 reserved2; - - char name[40]; - - __le32 array_status; - - /* device list continues beyond this point? */ -} __attribute__((packed)); - -static int carm_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void carm_remove_one (struct pci_dev *pdev); -static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo); - -static const struct pci_device_id carm_pci_tbl[] = { - { PCI_VENDOR_ID_PROMISE, 0x8000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_ID_PROMISE, 0x8002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, carm_pci_tbl); - -static struct pci_driver carm_driver = { - .name = DRV_NAME, - .id_table = carm_pci_tbl, - .probe = carm_init_one, - .remove = carm_remove_one, -}; - -static const struct block_device_operations carm_bd_ops = { - .owner = THIS_MODULE, - .getgeo = carm_bdev_getgeo, -}; - -static unsigned int carm_host_id; -static unsigned long carm_major_alloc; - - - -static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct carm_port *port = bdev->bd_disk->private_data; - - geo->heads = (u8) port->dev_geom_head; - geo->sectors = (u8) port->dev_geom_sect; - geo->cylinders = port->dev_geom_cyl; - return 0; -} - -static const u32 msg_sizes[] = { 32, 64, 128, CARM_MSG_SIZE }; - -static inline int carm_lookup_bucket(u32 msg_size) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(msg_sizes); i++) - if (msg_size <= msg_sizes[i]) - return i; - - return -ENOENT; -} - -static void carm_init_buckets(void __iomem *mmio) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(msg_sizes); i++) - writel(msg_sizes[i], mmio + CARM_CMS0 + (4 * i)); -} - -static inline void *carm_ref_msg(struct carm_host *host, - unsigned int msg_idx) -{ - return host->msg_base + (msg_idx * CARM_MSG_SIZE); -} - -static inline dma_addr_t carm_ref_msg_dma(struct carm_host *host, - unsigned int msg_idx) -{ - return host->msg_dma + (msg_idx * CARM_MSG_SIZE); -} - -static int carm_send_msg(struct carm_host *host, - struct carm_request *crq, unsigned tag) -{ - void __iomem *mmio = host->mmio; - u32 msg = (u32) carm_ref_msg_dma(host, tag); - u32 cm_bucket = crq->msg_bucket; - u32 tmp; - int rc = 0; - - VPRINTK("ENTER\n"); - - tmp = readl(mmio + CARM_HMUC); - if (tmp & CARM_Q_FULL) { -#if 0 - tmp = readl(mmio + CARM_INT_MASK); - tmp |= INT_Q_AVAILABLE; - writel(tmp, mmio + CARM_INT_MASK); - readl(mmio + CARM_INT_MASK); /* flush */ -#endif - DPRINTK("host msg queue full\n"); - rc = -EBUSY; - } else { - writel(msg | (cm_bucket << 1), mmio + CARM_IHQP); - readl(mmio + CARM_IHQP); /* flush */ - } - - return rc; -} - -static int carm_array_info (struct carm_host *host, unsigned int array_idx) -{ - struct carm_msg_ioctl *ioc; - u32 msg_data; - dma_addr_t msg_dma; - struct carm_request *crq; - struct request *rq; - int rc; - - rq = blk_mq_alloc_request(host->oob_q, REQ_OP_DRV_OUT, 0); - if (IS_ERR(rq)) { - rc = -ENOMEM; - goto err_out; - } - crq = blk_mq_rq_to_pdu(rq); - - ioc = carm_ref_msg(host, rq->tag); - msg_dma = carm_ref_msg_dma(host, rq->tag); - msg_data = (u32) (msg_dma + sizeof(struct carm_array_info)); - - crq->msg_type = CARM_MSG_ARRAY; - crq->msg_subtype = CARM_ARRAY_INFO; - rc = carm_lookup_bucket(sizeof(struct carm_msg_ioctl) + - sizeof(struct carm_array_info)); - BUG_ON(rc < 0); - crq->msg_bucket = (u32) rc; - - memset(ioc, 0, sizeof(*ioc)); - ioc->type = CARM_MSG_ARRAY; - ioc->subtype = CARM_ARRAY_INFO; - ioc->array_id = (u8) array_idx; - ioc->handle = cpu_to_le32(TAG_ENCODE(rq->tag)); - ioc->data_addr = cpu_to_le32(msg_data); - - spin_lock_irq(&host->lock); - assert(host->state == HST_DEV_SCAN_START || - host->state == HST_DEV_SCAN); - spin_unlock_irq(&host->lock); - - DPRINTK("blk_execute_rq_nowait, tag == %u\n", rq->tag); - blk_execute_rq_nowait(host->oob_q, NULL, rq, true, NULL); - - return 0; - -err_out: - spin_lock_irq(&host->lock); - host->state = HST_ERROR; - spin_unlock_irq(&host->lock); - return rc; -} - -typedef unsigned int (*carm_sspc_t)(struct carm_host *, unsigned int, void *); - -static int carm_send_special (struct carm_host *host, carm_sspc_t func) -{ - struct request *rq; - struct carm_request *crq; - struct carm_msg_ioctl *ioc; - void *mem; - unsigned int msg_size; - int rc; - - rq = blk_mq_alloc_request(host->oob_q, REQ_OP_DRV_OUT, 0); - if (IS_ERR(rq)) - return -ENOMEM; - crq = blk_mq_rq_to_pdu(rq); - - mem = carm_ref_msg(host, rq->tag); - - msg_size = func(host, rq->tag, mem); - - ioc = mem; - crq->msg_type = ioc->type; - crq->msg_subtype = ioc->subtype; - rc = carm_lookup_bucket(msg_size); - BUG_ON(rc < 0); - crq->msg_bucket = (u32) rc; - - DPRINTK("blk_execute_rq_nowait, tag == %u\n", rq->tag); - blk_execute_rq_nowait(host->oob_q, NULL, rq, true, NULL); - - return 0; -} - -static unsigned int carm_fill_sync_time(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_sync_time *st = mem; - - time64_t tv = ktime_get_real_seconds(); - - memset(st, 0, sizeof(*st)); - st->type = CARM_MSG_MISC; - st->subtype = MISC_SET_TIME; - st->handle = cpu_to_le32(TAG_ENCODE(idx)); - st->timestamp = cpu_to_le32(tv); - - return sizeof(struct carm_msg_sync_time); -} - -static unsigned int carm_fill_alloc_buf(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_allocbuf *ab = mem; - - memset(ab, 0, sizeof(*ab)); - ab->type = CARM_MSG_MISC; - ab->subtype = MISC_ALLOC_MEM; - ab->handle = cpu_to_le32(TAG_ENCODE(idx)); - ab->n_sg = 1; - ab->sg_type = SGT_32BIT; - ab->addr = cpu_to_le32(host->shm_dma + (PDC_SHM_SIZE >> 1)); - ab->len = cpu_to_le32(PDC_SHM_SIZE >> 1); - ab->evt_pool = cpu_to_le32(host->shm_dma + (16 * 1024)); - ab->n_evt = cpu_to_le32(1024); - ab->rbuf_pool = cpu_to_le32(host->shm_dma); - ab->n_rbuf = cpu_to_le32(RMSG_Q_LEN); - ab->msg_pool = cpu_to_le32(host->shm_dma + RBUF_LEN); - ab->n_msg = cpu_to_le32(CARM_Q_LEN); - ab->sg[0].start = cpu_to_le32(host->shm_dma + (PDC_SHM_SIZE >> 1)); - ab->sg[0].len = cpu_to_le32(65536); - - return sizeof(struct carm_msg_allocbuf); -} - -static unsigned int carm_fill_scan_channels(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_ioctl *ioc = mem; - u32 msg_data = (u32) (carm_ref_msg_dma(host, idx) + - IOC_SCAN_CHAN_OFFSET); - - memset(ioc, 0, sizeof(*ioc)); - ioc->type = CARM_MSG_IOCTL; - ioc->subtype = CARM_IOC_SCAN_CHAN; - ioc->handle = cpu_to_le32(TAG_ENCODE(idx)); - ioc->data_addr = cpu_to_le32(msg_data); - - /* fill output data area with "no device" default values */ - mem += IOC_SCAN_CHAN_OFFSET; - memset(mem, IOC_SCAN_CHAN_NODEV, CARM_MAX_PORTS); - - return IOC_SCAN_CHAN_OFFSET + CARM_MAX_PORTS; -} - -static unsigned int carm_fill_get_fw_ver(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_get_fw_ver *ioc = mem; - u32 msg_data = (u32) (carm_ref_msg_dma(host, idx) + sizeof(*ioc)); - - memset(ioc, 0, sizeof(*ioc)); - ioc->type = CARM_MSG_MISC; - ioc->subtype = MISC_GET_FW_VER; - ioc->handle = cpu_to_le32(TAG_ENCODE(idx)); - ioc->data_addr = cpu_to_le32(msg_data); - - return sizeof(struct carm_msg_get_fw_ver) + - sizeof(struct carm_fw_ver); -} - -static inline void carm_push_q (struct carm_host *host, struct request_queue *q) -{ - unsigned int idx = host->wait_q_prod % CARM_MAX_WAIT_Q; - - blk_mq_stop_hw_queues(q); - VPRINTK("STOPPED QUEUE %p\n", q); - - host->wait_q[idx] = q; - host->wait_q_prod++; - BUG_ON(host->wait_q_prod == host->wait_q_cons); /* overrun */ -} - -static inline struct request_queue *carm_pop_q(struct carm_host *host) -{ - unsigned int idx; - - if (host->wait_q_prod == host->wait_q_cons) - return NULL; - - idx = host->wait_q_cons % CARM_MAX_WAIT_Q; - host->wait_q_cons++; - - return host->wait_q[idx]; -} - -static inline void carm_round_robin(struct carm_host *host) -{ - struct request_queue *q = carm_pop_q(host); - if (q) { - blk_mq_start_hw_queues(q); - VPRINTK("STARTED QUEUE %p\n", q); - } -} - -static inline enum dma_data_direction carm_rq_dir(struct request *rq) -{ - return op_is_write(req_op(rq)) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; -} - -static blk_status_t carm_queue_rq(struct blk_mq_hw_ctx *hctx, - const struct blk_mq_queue_data *bd) -{ - struct request_queue *q = hctx->queue; - struct request *rq = bd->rq; - struct carm_port *port = q->queuedata; - struct carm_host *host = port->host; - struct carm_request *crq = blk_mq_rq_to_pdu(rq); - struct carm_msg_rw *msg; - struct scatterlist *sg; - int i, n_elem = 0, rc; - unsigned int msg_size; - u32 tmp; - - crq->n_elem = 0; - sg_init_table(crq->sg, CARM_MAX_REQ_SG); - - blk_mq_start_request(rq); - - spin_lock_irq(&host->lock); - if (req_op(rq) == REQ_OP_DRV_OUT) - goto send_msg; - - /* get scatterlist from block layer */ - sg = &crq->sg[0]; - n_elem = blk_rq_map_sg(q, rq, sg); - if (n_elem <= 0) - goto out_ioerr; - - /* map scatterlist to PCI bus addresses */ - n_elem = dma_map_sg(&host->pdev->dev, sg, n_elem, carm_rq_dir(rq)); - if (n_elem <= 0) - goto out_ioerr; - - /* obey global hardware limit on S/G entries */ - if (host->hw_sg_used >= CARM_MAX_HOST_SG - n_elem) - goto out_resource; - - crq->n_elem = n_elem; - host->hw_sg_used += n_elem; - - /* - * build read/write message - */ - - VPRINTK("build msg\n"); - msg = (struct carm_msg_rw *) carm_ref_msg(host, rq->tag); - - if (rq_data_dir(rq) == WRITE) { - msg->type = CARM_MSG_WRITE; - crq->msg_type = CARM_MSG_WRITE; - } else { - msg->type = CARM_MSG_READ; - crq->msg_type = CARM_MSG_READ; - } - - msg->id = port->port_no; - msg->sg_count = n_elem; - msg->sg_type = SGT_32BIT; - msg->handle = cpu_to_le32(TAG_ENCODE(rq->tag)); - msg->lba = cpu_to_le32(blk_rq_pos(rq) & 0xffffffff); - tmp = (blk_rq_pos(rq) >> 16) >> 16; - msg->lba_high = cpu_to_le16( (u16) tmp ); - msg->lba_count = cpu_to_le16(blk_rq_sectors(rq)); - - msg_size = sizeof(struct carm_msg_rw) - sizeof(msg->sg); - for (i = 0; i < n_elem; i++) { - struct carm_msg_sg *carm_sg = &msg->sg[i]; - carm_sg->start = cpu_to_le32(sg_dma_address(&crq->sg[i])); - carm_sg->len = cpu_to_le32(sg_dma_len(&crq->sg[i])); - msg_size += sizeof(struct carm_msg_sg); - } - - rc = carm_lookup_bucket(msg_size); - BUG_ON(rc < 0); - crq->msg_bucket = (u32) rc; -send_msg: - /* - * queue read/write message to hardware - */ - VPRINTK("send msg, tag == %u\n", rq->tag); - rc = carm_send_msg(host, crq, rq->tag); - if (rc) { - host->hw_sg_used -= n_elem; - goto out_resource; - } - - spin_unlock_irq(&host->lock); - return BLK_STS_OK; -out_resource: - dma_unmap_sg(&host->pdev->dev, &crq->sg[0], n_elem, carm_rq_dir(rq)); - carm_push_q(host, q); - spin_unlock_irq(&host->lock); - return BLK_STS_DEV_RESOURCE; -out_ioerr: - carm_round_robin(host); - spin_unlock_irq(&host->lock); - return BLK_STS_IOERR; -} - -static void carm_handle_array_info(struct carm_host *host, - struct carm_request *crq, u8 *mem, - blk_status_t error) -{ - struct carm_port *port; - u8 *msg_data = mem + sizeof(struct carm_array_info); - struct carm_array_info *desc = (struct carm_array_info *) msg_data; - u64 lo, hi; - int cur_port; - size_t slen; - - DPRINTK("ENTER\n"); - - if (error) - goto out; - if (le32_to_cpu(desc->array_status) & ARRAY_NO_EXIST) - goto out; - - cur_port = host->cur_scan_dev; - - /* should never occur */ - if ((cur_port < 0) || (cur_port >= CARM_MAX_PORTS)) { - printk(KERN_ERR PFX "BUG: cur_scan_dev==%d, array_id==%d\n", - cur_port, (int) desc->array_id); - goto out; - } - - port = &host->port[cur_port]; - - lo = (u64) le32_to_cpu(desc->size); - hi = (u64) le16_to_cpu(desc->size_hi); - - port->capacity = lo | (hi << 32); - port->dev_geom_head = le16_to_cpu(desc->head); - port->dev_geom_sect = le16_to_cpu(desc->sect); - port->dev_geom_cyl = le16_to_cpu(desc->cyl); - - host->dev_active |= (1 << cur_port); - - strncpy(port->name, desc->name, sizeof(port->name)); - port->name[sizeof(port->name) - 1] = 0; - slen = strlen(port->name); - while (slen && (port->name[slen - 1] == ' ')) { - port->name[slen - 1] = 0; - slen--; - } - - printk(KERN_INFO DRV_NAME "(%s): port %u device %Lu sectors\n", - pci_name(host->pdev), port->port_no, - (unsigned long long) port->capacity); - printk(KERN_INFO DRV_NAME "(%s): port %u device "%s"\n", - pci_name(host->pdev), port->port_no, port->name); - -out: - assert(host->state == HST_DEV_SCAN); - schedule_work(&host->fsm_task); -} - -static void carm_handle_scan_chan(struct carm_host *host, - struct carm_request *crq, u8 *mem, - blk_status_t error) -{ - u8 *msg_data = mem + IOC_SCAN_CHAN_OFFSET; - unsigned int i, dev_count = 0; - int new_state = HST_DEV_SCAN_START; - - DPRINTK("ENTER\n"); - - if (error) { - new_state = HST_ERROR; - goto out; - } - - /* TODO: scan and support non-disk devices */ - for (i = 0; i < 8; i++) - if (msg_data[i] == 0) { /* direct-access device (disk) */ - host->dev_present |= (1 << i); - dev_count++; - } - - printk(KERN_INFO DRV_NAME "(%s): found %u interesting devices\n", - pci_name(host->pdev), dev_count); - -out: - assert(host->state == HST_PORT_SCAN); - host->state = new_state; - schedule_work(&host->fsm_task); -} - -static void carm_handle_generic(struct carm_host *host, - struct carm_request *crq, blk_status_t error, - int cur_state, int next_state) -{ - DPRINTK("ENTER\n"); - - assert(host->state == cur_state); - if (error) - host->state = HST_ERROR; - else - host->state = next_state; - schedule_work(&host->fsm_task); -} - -static inline void carm_handle_resp(struct carm_host *host, - __le32 ret_handle_le, u32 status) -{ - u32 handle = le32_to_cpu(ret_handle_le); - unsigned int msg_idx; - struct request *rq; - struct carm_request *crq; - blk_status_t error = (status == RMSG_OK) ? 0 : BLK_STS_IOERR; - u8 *mem; - - VPRINTK("ENTER, handle == 0x%x\n", handle); - - if (unlikely(!TAG_VALID(handle))) { - printk(KERN_ERR DRV_NAME "(%s): BUG: invalid tag 0x%x\n", - pci_name(host->pdev), handle); - return; - } - - msg_idx = TAG_DECODE(handle); - VPRINTK("tag == %u\n", msg_idx); - - rq = blk_mq_tag_to_rq(host->tag_set.tags[0], msg_idx); - crq = blk_mq_rq_to_pdu(rq); - - /* fast path */ - if (likely(crq->msg_type == CARM_MSG_READ || - crq->msg_type == CARM_MSG_WRITE)) { - dma_unmap_sg(&host->pdev->dev, &crq->sg[0], crq->n_elem, - carm_rq_dir(rq)); - goto done; - } - - mem = carm_ref_msg(host, msg_idx); - - switch (crq->msg_type) { - case CARM_MSG_IOCTL: { - switch (crq->msg_subtype) { - case CARM_IOC_SCAN_CHAN: - carm_handle_scan_chan(host, crq, mem, error); - goto done; - default: - /* unknown / invalid response */ - goto err_out; - } - break; - } - - case CARM_MSG_MISC: { - switch (crq->msg_subtype) { - case MISC_ALLOC_MEM: - carm_handle_generic(host, crq, error, - HST_ALLOC_BUF, HST_SYNC_TIME); - goto done; - case MISC_SET_TIME: - carm_handle_generic(host, crq, error, - HST_SYNC_TIME, HST_GET_FW_VER); - goto done; - case MISC_GET_FW_VER: { - struct carm_fw_ver *ver = (struct carm_fw_ver *) - (mem + sizeof(struct carm_msg_get_fw_ver)); - if (!error) { - host->fw_ver = le32_to_cpu(ver->version); - host->flags |= (ver->features & FL_FW_VER_MASK); - } - carm_handle_generic(host, crq, error, - HST_GET_FW_VER, HST_PORT_SCAN); - goto done; - } - default: - /* unknown / invalid response */ - goto err_out; - } - break; - } - - case CARM_MSG_ARRAY: { - switch (crq->msg_subtype) { - case CARM_ARRAY_INFO: - carm_handle_array_info(host, crq, mem, error); - break; - default: - /* unknown / invalid response */ - goto err_out; - } - break; - } - - default: - /* unknown / invalid response */ - goto err_out; - } - - return; - -err_out: - printk(KERN_WARNING DRV_NAME "(%s): BUG: unhandled message type %d/%d\n", - pci_name(host->pdev), crq->msg_type, crq->msg_subtype); - error = BLK_STS_IOERR; -done: - host->hw_sg_used -= crq->n_elem; - blk_mq_end_request(blk_mq_rq_from_pdu(crq), error); - - if (host->hw_sg_used <= CARM_SG_LOW_WATER) - carm_round_robin(host); -} - -static inline void carm_handle_responses(struct carm_host *host) -{ - void __iomem *mmio = host->mmio; - struct carm_response *resp = (struct carm_response *) host->shm; - unsigned int work = 0; - unsigned int idx = host->resp_idx % RMSG_Q_LEN; - - while (1) { - u32 status = le32_to_cpu(resp[idx].status); - - if (status == 0xffffffff) { - VPRINTK("ending response on index %u\n", idx); - writel(idx << 3, mmio + CARM_RESP_IDX); - break; - } - - /* response to a message we sent */ - else if ((status & (1 << 31)) == 0) { - VPRINTK("handling msg response on index %u\n", idx); - carm_handle_resp(host, resp[idx].ret_handle, status); - resp[idx].status = cpu_to_le32(0xffffffff); - } - - /* asynchronous events the hardware throws our way */ - else if ((status & 0xff000000) == (1 << 31)) { - u8 *evt_type_ptr = (u8 *) &resp[idx]; - u8 evt_type = *evt_type_ptr; - printk(KERN_WARNING DRV_NAME "(%s): unhandled event type %d\n", - pci_name(host->pdev), (int) evt_type); - resp[idx].status = cpu_to_le32(0xffffffff); - } - - idx = NEXT_RESP(idx); - work++; - } - - VPRINTK("EXIT, work==%u\n", work); - host->resp_idx += work; -} - -static irqreturn_t carm_interrupt(int irq, void *__host) -{ - struct carm_host *host = __host; - void __iomem *mmio; - u32 mask; - int handled = 0; - unsigned long flags; - - if (!host) { - VPRINTK("no host\n"); - return IRQ_NONE; - } - - spin_lock_irqsave(&host->lock, flags); - - mmio = host->mmio; - - /* reading should also clear interrupts */ - mask = readl(mmio + CARM_INT_STAT); - - if (mask == 0 || mask == 0xffffffff) { - VPRINTK("no work, mask == 0x%x\n", mask); - goto out; - } - - if (mask & INT_ACK_MASK) - writel(mask, mmio + CARM_INT_STAT); - - if (unlikely(host->state == HST_INVALID)) { - VPRINTK("not initialized yet, mask = 0x%x\n", mask); - goto out; - } - - if (mask & CARM_HAVE_RESP) { - handled = 1; - carm_handle_responses(host); - } - -out: - spin_unlock_irqrestore(&host->lock, flags); - VPRINTK("EXIT\n"); - return IRQ_RETVAL(handled); -} - -static void carm_fsm_task (struct work_struct *work) -{ - struct carm_host *host = - container_of(work, struct carm_host, fsm_task); - unsigned long flags; - unsigned int state; - int rc, i, next_dev; - int reschedule = 0; - int new_state = HST_INVALID; - - spin_lock_irqsave(&host->lock, flags); - state = host->state; - spin_unlock_irqrestore(&host->lock, flags); - - DPRINTK("ENTER, state == %s\n", state_name[state]); - - switch (state) { - case HST_PROBE_START: - new_state = HST_ALLOC_BUF; - reschedule = 1; - break; - - case HST_ALLOC_BUF: - rc = carm_send_special(host, carm_fill_alloc_buf); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_SYNC_TIME: - rc = carm_send_special(host, carm_fill_sync_time); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_GET_FW_VER: - rc = carm_send_special(host, carm_fill_get_fw_ver); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_PORT_SCAN: - rc = carm_send_special(host, carm_fill_scan_channels); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_DEV_SCAN_START: - host->cur_scan_dev = -1; - new_state = HST_DEV_SCAN; - reschedule = 1; - break; - - case HST_DEV_SCAN: - next_dev = -1; - for (i = host->cur_scan_dev + 1; i < CARM_MAX_PORTS; i++) - if (host->dev_present & (1 << i)) { - next_dev = i; - break; - } - - if (next_dev >= 0) { - host->cur_scan_dev = next_dev; - rc = carm_array_info(host, next_dev); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - } else { - new_state = HST_DEV_ACTIVATE; - reschedule = 1; - } - break; - - case HST_DEV_ACTIVATE: { - int activated = 0; - for (i = 0; i < CARM_MAX_PORTS; i++) - if (host->dev_active & (1 << i)) { - struct carm_port *port = &host->port[i]; - struct gendisk *disk = port->disk; - - set_capacity(disk, port->capacity); - add_disk(disk); - activated++; - } - - printk(KERN_INFO DRV_NAME "(%s): %d ports activated\n", - pci_name(host->pdev), activated); - - new_state = HST_PROBE_FINISHED; - reschedule = 1; - break; - } - - case HST_PROBE_FINISHED: - complete(&host->probe_comp); - break; - - case HST_ERROR: - /* FIXME: TODO */ - break; - - default: - /* should never occur */ - printk(KERN_ERR PFX "BUG: unknown state %d\n", state); - assert(0); - break; - } - - if (new_state != HST_INVALID) { - spin_lock_irqsave(&host->lock, flags); - host->state = new_state; - spin_unlock_irqrestore(&host->lock, flags); - } - if (reschedule) - schedule_work(&host->fsm_task); -} - -static int carm_init_wait(void __iomem *mmio, u32 bits, unsigned int test_bit) -{ - unsigned int i; - - for (i = 0; i < 50000; i++) { - u32 tmp = readl(mmio + CARM_LMUC); - udelay(100); - - if (test_bit) { - if ((tmp & bits) == bits) - return 0; - } else { - if ((tmp & bits) == 0) - return 0; - } - - cond_resched(); - } - - printk(KERN_ERR PFX "carm_init_wait timeout, bits == 0x%x, test_bit == %s\n", - bits, test_bit ? "yes" : "no"); - return -EBUSY; -} - -static void carm_init_responses(struct carm_host *host) -{ - void __iomem *mmio = host->mmio; - unsigned int i; - struct carm_response *resp = (struct carm_response *) host->shm; - - for (i = 0; i < RMSG_Q_LEN; i++) - resp[i].status = cpu_to_le32(0xffffffff); - - writel(0, mmio + CARM_RESP_IDX); -} - -static int carm_init_host(struct carm_host *host) -{ - void __iomem *mmio = host->mmio; - u32 tmp; - u8 tmp8; - int rc; - - DPRINTK("ENTER\n"); - - writel(0, mmio + CARM_INT_MASK); - - tmp8 = readb(mmio + CARM_INITC); - if (tmp8 & 0x01) { - tmp8 &= ~0x01; - writeb(tmp8, mmio + CARM_INITC); - readb(mmio + CARM_INITC); /* flush */ - - DPRINTK("snooze...\n"); - msleep(5000); - } - - tmp = readl(mmio + CARM_HMUC); - if (tmp & CARM_CME) { - DPRINTK("CME bit present, waiting\n"); - rc = carm_init_wait(mmio, CARM_CME, 1); - if (rc) { - DPRINTK("EXIT, carm_init_wait 1 failed\n"); - return rc; - } - } - if (tmp & CARM_RME) { - DPRINTK("RME bit present, waiting\n"); - rc = carm_init_wait(mmio, CARM_RME, 1); - if (rc) { - DPRINTK("EXIT, carm_init_wait 2 failed\n"); - return rc; - } - } - - tmp &= ~(CARM_RME | CARM_CME); - writel(tmp, mmio + CARM_HMUC); - readl(mmio + CARM_HMUC); /* flush */ - - rc = carm_init_wait(mmio, CARM_RME | CARM_CME, 0); - if (rc) { - DPRINTK("EXIT, carm_init_wait 3 failed\n"); - return rc; - } - - carm_init_buckets(mmio); - - writel(host->shm_dma & 0xffffffff, mmio + RBUF_ADDR_LO); - writel((host->shm_dma >> 16) >> 16, mmio + RBUF_ADDR_HI); - writel(RBUF_LEN, mmio + RBUF_BYTE_SZ); - - tmp = readl(mmio + CARM_HMUC); - tmp |= (CARM_RME | CARM_CME | CARM_WZBC); - writel(tmp, mmio + CARM_HMUC); - readl(mmio + CARM_HMUC); /* flush */ - - rc = carm_init_wait(mmio, CARM_RME | CARM_CME, 1); - if (rc) { - DPRINTK("EXIT, carm_init_wait 4 failed\n"); - return rc; - } - - writel(0, mmio + CARM_HMPHA); - writel(INT_DEF_MASK, mmio + CARM_INT_MASK); - - carm_init_responses(host); - - /* start initialization, probing state machine */ - spin_lock_irq(&host->lock); - assert(host->state == HST_INVALID); - host->state = HST_PROBE_START; - spin_unlock_irq(&host->lock); - schedule_work(&host->fsm_task); - - DPRINTK("EXIT\n"); - return 0; -} - -static const struct blk_mq_ops carm_mq_ops = { - .queue_rq = carm_queue_rq, -}; - -static int carm_init_disk(struct carm_host *host, unsigned int port_no) -{ - struct carm_port *port = &host->port[port_no]; - struct gendisk *disk; - struct request_queue *q; - - port->host = host; - port->port_no = port_no; - - disk = alloc_disk(CARM_MINORS_PER_MAJOR); - if (!disk) - return -ENOMEM; - - port->disk = disk; - sprintf(disk->disk_name, DRV_NAME "/%u", - (unsigned int)host->id * CARM_MAX_PORTS + port_no); - disk->major = host->major; - disk->first_minor = port_no * CARM_MINORS_PER_MAJOR; - disk->fops = &carm_bd_ops; - disk->private_data = port; - - q = blk_mq_init_queue(&host->tag_set); - if (IS_ERR(q)) - return PTR_ERR(q); - - blk_queue_max_segments(q, CARM_MAX_REQ_SG); - blk_queue_segment_boundary(q, CARM_SG_BOUNDARY); - - q->queuedata = port; - disk->queue = q; - return 0; -} - -static void carm_free_disk(struct carm_host *host, unsigned int port_no) -{ - struct carm_port *port = &host->port[port_no]; - struct gendisk *disk = port->disk; - - if (!disk) - return; - - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - if (disk->queue) - blk_cleanup_queue(disk->queue); - put_disk(disk); -} - -static int carm_init_shm(struct carm_host *host) -{ - host->shm = dma_alloc_coherent(&host->pdev->dev, CARM_SHM_SIZE, - &host->shm_dma, GFP_KERNEL); - if (!host->shm) - return -ENOMEM; - - host->msg_base = host->shm + RBUF_LEN; - host->msg_dma = host->shm_dma + RBUF_LEN; - - memset(host->shm, 0xff, RBUF_LEN); - memset(host->msg_base, 0, PDC_SHM_SIZE - RBUF_LEN); - - return 0; -} - -static int carm_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct carm_host *host; - int rc; - struct request_queue *q; - unsigned int i; - - printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out; - - rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (rc) { - printk(KERN_ERR DRV_NAME "(%s): DMA mask failure\n", - pci_name(pdev)); - goto err_out_regions; - } - - host = kzalloc(sizeof(*host), GFP_KERNEL); - if (!host) { - printk(KERN_ERR DRV_NAME "(%s): memory alloc failure\n", - pci_name(pdev)); - rc = -ENOMEM; - goto err_out_regions; - } - - host->pdev = pdev; - spin_lock_init(&host->lock); - INIT_WORK(&host->fsm_task, carm_fsm_task); - init_completion(&host->probe_comp); - - host->mmio = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (!host->mmio) { - printk(KERN_ERR DRV_NAME "(%s): MMIO alloc failure\n", - pci_name(pdev)); - rc = -ENOMEM; - goto err_out_kfree; - } - - rc = carm_init_shm(host); - if (rc) { - printk(KERN_ERR DRV_NAME "(%s): DMA SHM alloc failure\n", - pci_name(pdev)); - goto err_out_iounmap; - } - - memset(&host->tag_set, 0, sizeof(host->tag_set)); - host->tag_set.ops = &carm_mq_ops; - host->tag_set.cmd_size = sizeof(struct carm_request); - host->tag_set.nr_hw_queues = 1; - host->tag_set.nr_maps = 1; - host->tag_set.queue_depth = max_queue; - host->tag_set.numa_node = NUMA_NO_NODE; - host->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; - - rc = blk_mq_alloc_tag_set(&host->tag_set); - if (rc) - goto err_out_dma_free; - - q = blk_mq_init_queue(&host->tag_set); - if (IS_ERR(q)) { - rc = PTR_ERR(q); - blk_mq_free_tag_set(&host->tag_set); - goto err_out_dma_free; - } - - host->oob_q = q; - q->queuedata = host; - - /* - * Figure out which major to use: 160, 161, or dynamic - */ - if (!test_and_set_bit(0, &carm_major_alloc)) - host->major = 160; - else if (!test_and_set_bit(1, &carm_major_alloc)) - host->major = 161; - else - host->flags |= FL_DYN_MAJOR; - - host->id = carm_host_id; - sprintf(host->name, DRV_NAME "%d", carm_host_id); - - rc = register_blkdev(host->major, host->name); - if (rc < 0) - goto err_out_free_majors; - if (host->flags & FL_DYN_MAJOR) - host->major = rc; - - for (i = 0; i < CARM_MAX_PORTS; i++) { - rc = carm_init_disk(host, i); - if (rc) - goto err_out_blkdev_disks; - } - - pci_set_master(pdev); - - rc = request_irq(pdev->irq, carm_interrupt, IRQF_SHARED, DRV_NAME, host); - if (rc) { - printk(KERN_ERR DRV_NAME "(%s): irq alloc failure\n", - pci_name(pdev)); - goto err_out_blkdev_disks; - } - - rc = carm_init_host(host); - if (rc) - goto err_out_free_irq; - - DPRINTK("waiting for probe_comp\n"); - wait_for_completion(&host->probe_comp); - - printk(KERN_INFO "%s: pci %s, ports %d, io %llx, irq %u, major %d\n", - host->name, pci_name(pdev), (int) CARM_MAX_PORTS, - (unsigned long long)pci_resource_start(pdev, 0), - pdev->irq, host->major); - - carm_host_id++; - pci_set_drvdata(pdev, host); - return 0; - -err_out_free_irq: - free_irq(pdev->irq, host); -err_out_blkdev_disks: - for (i = 0; i < CARM_MAX_PORTS; i++) - carm_free_disk(host, i); - unregister_blkdev(host->major, host->name); -err_out_free_majors: - if (host->major == 160) - clear_bit(0, &carm_major_alloc); - else if (host->major == 161) - clear_bit(1, &carm_major_alloc); - blk_cleanup_queue(host->oob_q); - blk_mq_free_tag_set(&host->tag_set); -err_out_dma_free: - dma_free_coherent(&pdev->dev, CARM_SHM_SIZE, host->shm, host->shm_dma); -err_out_iounmap: - iounmap(host->mmio); -err_out_kfree: - kfree(host); -err_out_regions: - pci_release_regions(pdev); -err_out: - pci_disable_device(pdev); - return rc; -} - -static void carm_remove_one (struct pci_dev *pdev) -{ - struct carm_host *host = pci_get_drvdata(pdev); - unsigned int i; - - if (!host) { - printk(KERN_ERR PFX "BUG: no host data for PCI(%s)\n", - pci_name(pdev)); - return; - } - - free_irq(pdev->irq, host); - for (i = 0; i < CARM_MAX_PORTS; i++) - carm_free_disk(host, i); - unregister_blkdev(host->major, host->name); - if (host->major == 160) - clear_bit(0, &carm_major_alloc); - else if (host->major == 161) - clear_bit(1, &carm_major_alloc); - blk_cleanup_queue(host->oob_q); - blk_mq_free_tag_set(&host->tag_set); - dma_free_coherent(&pdev->dev, CARM_SHM_SIZE, host->shm, host->shm_dma); - iounmap(host->mmio); - kfree(host); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -module_pci_driver(carm_driver);

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sagi Grimberg sagi@grimberg.me

commit d920abd1e7c4884f9ecd0749d1921b7ab19ddfbd upstream.

From Alon:

"Due to a logical bug in the NVMe-oF/TCP subsystem in the Linux kernel, a malicious user can cause a UAF and a double free, which may lead to RCE (may also lead to an LPE in case the attacker already has local privileges)."

Hence, when a queue initialization fails after the ahash requests are allocated, it is guaranteed that the queue removal async work will be called, hence leave the deallocation to the queue removal.

Also, be extra careful not to continue processing the socket, so set queue rcv_state to NVMET_TCP_RECV_ERR upon a socket error.

Cc: stable@vger.kernel.org Reported-by: Alon Zahavi zahavi.alon@gmail.com Tested-by: Alon Zahavi zahavi.alon@gmail.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Chaitanya Kulkarni kch@nvidia.com Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Dragos-Marian Panait dragos.panait@windriver.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/nvme/target/tcp.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -323,6 +323,7 @@ static void nvmet_tcp_fatal_error(struct

static void nvmet_tcp_socket_error(struct nvmet_tcp_queue *queue, int status) { + queue->rcv_state = NVMET_TCP_RECV_ERR; if (status == -EPIPE || status == -ECONNRESET) kernel_sock_shutdown(queue->sock, SHUT_RDWR); else @@ -828,15 +829,11 @@ static int nvmet_tcp_handle_icreq(struct iov.iov_len = sizeof(*icresp); ret = kernel_sendmsg(queue->sock, &msg, &iov, 1, iov.iov_len); if (ret < 0) - goto free_crypto; + return ret; /* queue removal will cleanup */

queue->state = NVMET_TCP_Q_LIVE; nvmet_prepare_receive_pdu(queue); return 0; -free_crypto: - if (queue->hdr_digest || queue->data_digest) - nvmet_tcp_free_crypto(queue); - return ret; }

static void nvmet_tcp_handle_req_failure(struct nvmet_tcp_queue *queue,

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vicki Pfau vi@endrift.com

commit 7e6f3b6d2c352b5fde37ce3fed83bdf6172eebd4 upstream.

The AMD VanGogh SoC contains a DesignWare USB3 Dual-Role Device that can be operated as either a USB Host or a USB Device, similar to on the AMD Nolan platform.

be6646bfbaec ("PCI: Prevent xHCI driver from claiming AMD Nolan USB3 DRD device") added a quirk to let the dwc3 driver claim the Nolan device since it provides more specific support.

Extend that quirk to include the VanGogh SoC USB3 device.

Link: https://lore.kernel.org/r/20230927202212.2388216-1-vi@endrift.com Signed-off-by: Vicki Pfau vi@endrift.com [bhelgaas: include be6646bfbaec reference, add stable tag] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/quirks.c | 8 +++++--- include/linux/pci_ids.h | 1 + 2 files changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -597,7 +597,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT /* * In the AMD NL platform, this device ([1022:7912]) has a class code of * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will - * claim it. + * claim it. The same applies on the VanGogh platform device ([1022:163a]). * * But the dwc3 driver is a more specific driver for this device, and we'd * prefer to use it instead of xhci. To prevent xhci from claiming the @@ -605,7 +605,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT * defines as "USB device (not host controller)". The dwc3 driver can then * claim it based on its Vendor and Device ID. */ -static void quirk_amd_nl_class(struct pci_dev *pdev) +static void quirk_amd_dwc_class(struct pci_dev *pdev) { u32 class = pdev->class;

@@ -615,7 +615,9 @@ static void quirk_amd_nl_class(struct pc class, pdev->class); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, - quirk_amd_nl_class); + quirk_amd_dwc_class); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VANGOGH_USB, + quirk_amd_dwc_class);

/* * Synopsys USB 3.x host HAPS platform has a class code of --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -554,6 +554,7 @@ #define PCI_DEVICE_ID_AMD_17H_M30H_DF_F3 0x1493 #define PCI_DEVICE_ID_AMD_17H_M60H_DF_F3 0x144b #define PCI_DEVICE_ID_AMD_17H_M70H_DF_F3 0x1443 +#define PCI_DEVICE_ID_AMD_VANGOGH_USB 0x163a #define PCI_DEVICE_ID_AMD_19H_DF_F3 0x1653 #define PCI_DEVICE_ID_AMD_CNB17H_F3 0x1703 #define PCI_DEVICE_ID_AMD_LANCE 0x2000

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cameron Williams cang1@live.co.uk

commit 33092fb3af51deb80849e90a17bada44bbcde6b3 upstream.

The UC-257 is a serial + LPT card, so remove it from this driver. A patch has been submitted to add it to parport_serial instead.

Additionaly, the UC-431 does not use this card ID, only the UC-420 does. The 431 is a 3-port card and there is no generic 3-port configuration available, so remove reference to it from this driver.

Fixes: 152d1afa834c ("tty: Add support for Brainboxes UC cards.") Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams cang1@live.co.uk Link: https://lore.kernel.org/r/DU0PR02MB78995ADF7394C74AD4CF3357C4DBA@DU0PR02MB78... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_pci.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5132,13 +5132,6 @@ static const struct pci_device_id serial 0, 0, pbn_b2_1_115200 }, /* - * Brainboxes UC-257 - */ - { PCI_VENDOR_ID_INTASHIELD, 0x0861, - PCI_ANY_ID, PCI_ANY_ID, - 0, 0, - pbn_b2_2_115200 }, - /* * Brainboxes UC-260/271/701/756 */ { PCI_VENDOR_ID_INTASHIELD, 0x0D21, @@ -5217,7 +5210,7 @@ static const struct pci_device_id serial 0, 0, pbn_b2_4_115200 }, /* - * Brainboxes UC-420/431 + * Brainboxes UC-420 */ { PCI_VENDOR_ID_INTASHIELD, 0x0921, PCI_ANY_ID, PCI_ANY_ID,

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cameron Williams cang1@live.co.uk

commit 2c6fec1e1532f15350be7e14ba6b88a39d289fe4 upstream.

Add support for the Brainboxes UP (powered PCI) range of cards, namely UP-189, UP-200, UP-869 and UP-880.

Cc: stable@vger.kernel.org Signed-off-by: Cameron Williams cang1@live.co.uk Link: https://lore.kernel.org/r/DU0PR02MB7899B5B59FF3D8587E88C117C4DBA@DU0PR02MB78... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/8250/8250_pci.c | 60 +++++++++++++++++++++++++++++++++++++ 1 file changed, 60 insertions(+)

--- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5154,6 +5154,66 @@ static const struct pci_device_id serial PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, pbn_b2_4_115200 }, /* + * Brainboxes UP-189 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0AC1, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC2, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0AC3, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-200 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0B21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0B23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-869 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C01, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C02, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C03, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* + * Brainboxes UP-880 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0C21, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C22, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0C23, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + pbn_b2_2_115200 }, + /* * Brainboxes UC-268 */ { PCI_VENDOR_ID_INTASHIELD, 0x0841,