This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.7.7-rc1
Geliang Tang geliang.tang@linux.dev selftests: mptcp: add mptcp_lib_get_counter
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: join: stop transfer when check is done (part 2)
Chengming Zhou zhouchengming@bytedance.com mm/zswap: invalidate duplicate entry when !zswap_enabled
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: join: stop transfer when check is done (part 1)
Yosry Ahmed yosryahmed@google.com mm: zswap: fix missing folio cleanup in writeback race path
Corey Minyard minyard@acm.org i2c: imx: when being a target, mark the last read as processed
Melissa Wen mwen@igalia.com drm/amd/display: fix null-pointer dereference on edid reading
Armin Wolf W_Armin@gmx.de drm/amd/display: Fix memory leak in dm_sw_fini()
Srinivasan Shanmugam srinivasan.shanmugam@amd.com drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
Muhammad Usama Anjum usama.anjum@collabora.com selftests/iommu: fix the config fragment
Erik Kurzinger ekurzinger@nvidia.com drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func
Jason Gunthorpe jgg@ziepe.ca iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
Tina Zhang tina.zhang@intel.com iommu: Add mm_get_enqcmd_pasid() helper function
Erik Kurzinger ekurzinger@nvidia.com drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
Siddharth Vadapalli s-vadapalli@ti.com net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
Justin Iurman justin.iurman@uliege.be Fix write to cloned skb in ipv6_hop_ioam()
Rémi Denis-Courmont courmisch@gmail.com phonet/pep: fix racy skb_queue_empty() use
Rémi Denis-Courmont courmisch@gmail.com phonet: take correct lock to peek at the RX queue
Horatiu Vultur horatiu.vultur@microchip.com net: sparx5: Add spinlock for frame transmission from CPU
Jianbo Liu jianbol@nvidia.com net/sched: flower: Add lock protection when remove filter handle
Jiri Pirko jiri@resnulli.us devlink: fix port dump cmd type
Jakub Kicinski kuba@kernel.org tools: ynl: don't leak mcast_groups on init error
Jakub Kicinski kuba@kernel.org tools: ynl: make sure we always pass yarg to mnl_cb_run
Jeremy Kerr jk@codeconstruct.com.au net: mctp: put sock on tag allocation failure
Florian Westphal fw@strlen.de netfilter: nf_tables: use kzalloc for hook allocation
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: register hooks last when adding new chain/flowtable
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_flow_offload: release dst in case direct xmit path is used
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_flow_offload: reset dst in route object after setting up flow
Florian Westphal fw@strlen.de netfilter: nf_tables: set dormant flag on hook register failure
Sabrina Dubroca sd@queasysnail.net tls: don't skip over different type records from the rx_list
Sabrina Dubroca sd@queasysnail.net tls: stop recv() if initial process_rx_list gave us non-DATA
Sabrina Dubroca sd@queasysnail.net tls: break out of main loop when PEEK gets a non-data record
Guenter Roeck linux@roeck-us.net hwmon: (nct6775) Fix access to temperature configuration registers
Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
Shigeru Yoshida syoshida@redhat.com bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
Jason Gunthorpe jgg@ziepe.ca s390: use the correct count for __iowrite64_copy()
Jason Gunthorpe jgg@ziepe.ca iommufd: Reject non-zero data_type if no data_len is provided
Alex Elder elder@linaro.org net: ipa: don't overrun IPA suspend interrupt registers
Eric Dumazet edumazet@google.com net: implement lockless setsockopt(SO_PEEK_OFF)
Subbaraya Sundeep sbhatta@marvell.com octeontx2-af: Consider the action set by PF
Yi Liu yi.l.liu@intel.com iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
Yi Liu yi.l.liu@intel.com iommu/vt-d: Add missing dirty tracking set for parent domain
Yi Liu yi.l.liu@intel.com iommu/vt-d: Wrap the dirty tracking loop to be a helper
Yi Liu yi.l.liu@intel.com iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
Yi Liu yi.l.liu@intel.com iommu/vt-d: Track nested domains in parent
Yi Liu yi.l.liu@intel.com iommu/vt-d: Update iotlb in nested domain attach
Maxime Ripard mripard@kernel.org drm/i915/tv: Fix TV mode
Mario Limonciello mario.limonciello@amd.com platform/x86: thinkpad_acpi: Only update profile if successfully converted
Mark Brown broonie@kernel.org arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
Mark Brown broonie@kernel.org arm64/sme: Restore SME registers on exit from suspend
Emil Renner Berthing emil.renner.berthing@canonical.com gpiolib: Handle no pin_ranges in gpiochip_generic_config()
Amit Machhiwal amachhiw@linux.ibm.com KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
Kuniyuki Iwashima kuniyu@amazon.com arp: Prevent overflow in arp_req_get().
Vasiliy Kovalev kovalev@altlinux.org devlink: fix possible use-after-free and memory leaks in devlink_init()
Vasiliy Kovalev kovalev@altlinux.org ipv6: sr: fix possible use-after-free and null-ptr-deref
Daniil Dulov d.dulov@aladdin.ru afs: Increase buffer size in afs_update_volume_status()
Guenter Roeck linux@roeck-us.net parisc: Fix stack unwinder
Mark Pearson mpearson-lenovo@squebb.ca platform/x86: think-lmi: Fix password opcode ordering for workstations
Martin KaFai Lau martin.lau@kernel.org bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
Radhey Shyam Pandey radhey.shyam.pandey@amd.com ata: ahci_ceva: fix error handling for Xilinx GT PHY support
Hangbin Liu liuhangbin@gmail.com selftests: bonding: set active slave to primary eth1 specifically
Gaurav Batra gbatra@linux.ibm.com powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
Justin Chen justin.chen@broadcom.com net: bcmasp: Sanity check is off by one
Florian Fainelli florian.fainelli@broadcom.com net: bcmasp: Indicate MAC is in charge of PHY PM
Eric Dumazet edumazet@google.com ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid
Eric Dumazet edumazet@google.com ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid
Pavel Sakharov p.sakharov@ispras.ru net: stmmac: Fix incorrect dereference in interrupt handlers
Alison Schofield alison.schofield@intel.com x86/numa: Fix the sort compare func used in numa_fill_memblks()
Alison Schofield alison.schofield@intel.com x86/numa: Fix the address overlap check in numa_fill_memblks()
Dan Carpenter dan.carpenter@linaro.org drm/nouveau/mmu/r535: uninitialized variable in r535_bar_new_()
Arnd Bergmann arnd@arndb.de nouveau: fix function cast warnings
Jakub Kicinski kuba@kernel.org net/sched: act_mirred: don't override retval if we already lost the skb
Jakub Kicinski kuba@kernel.org net/sched: act_mirred: use the backlog for mirred ingress
Victor Nogueira victor@mojatatu.com net/sched: act_mirred: Create function tcf_mirred_to_dev and improve readability
Randy Dunlap rdunlap@infradead.org net: ethernet: adi: requires PHYLIB support
Kuniyuki Iwashima kuniyu@amazon.com dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().
Tobias Waldekranz tobias@waldekranz.com net: bridge: switchdev: Ensure deferred event delivery on unoffload
Tobias Waldekranz tobias@waldekranz.com net: bridge: switchdev: Skip MDB replays of deferred events on offload
Randy Dunlap rdunlap@infradead.org scsi: jazz_esp: Only build if SCSI core is builtin
Don Brace don.brace@microchip.com scsi: smartpqi: Fix disable_managed_interrupts
Dan Carpenter dan.carpenter@linaro.org scsi: ufs: Uninitialized variable in ufshcd_devfreq_target()
Gianmarco Lusvardi glusvardi@posteo.net bpf, scripts: Correct GPL license name
Arnd Bergmann arnd@arndb.de RDMA/srpt: fix function pointer cast warnings
Sebastian Andrzej Siewior bigeasy@linutronix.de xsk: Add truesize to skb_add_rx_frag().
Chris Morgan macromorgan@hotmail.com arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
Heiko Stuebner heiko.stuebner@cherry.de arm64: dts: rockchip: set num-cs property for spi on px30
Kamal Heib kheib@redhat.com RDMA/qedr: Fix qedr_create_user_qp error flow
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Consider page offset for the pages to be pinned
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Handle recording beyond the mapped pages
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Bounds check mapped::pages access
Lucas Stach l.stach@pengutronix.de bus: imx-weim: fix valid range check
Alexander Stein alexander.stein@ew.tq-group.com arm64: dts: tqma8mpql: fix audio codec iov-supply
Bart Van Assche bvanassche@acm.org RDMA/srpt: Support specifying the srpt_service_guid parameter
Mustafa Ismail mustafa.ismail@intel.com RDMA/irdma: Add AE for too many RNRS
Mustafa Ismail mustafa.ismail@intel.com RDMA/irdma: Set the CQ read threshold for GEN 1
Shiraz Saleem shiraz.saleem@intel.com RDMA/irdma: Validate max_send_wr and max_recv_wr
Mike Marciniszyn mike.marciniszyn@intel.com RDMA/irdma: Fix KASAN issue with tasklet
Marek Vasut marex@denx.de arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC
Mark Zhang markzhang@nvidia.com IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported
Kalesh AP kalesh-anakkur.purayil@broadcom.com RDMA/bnxt_re: Add a missing check in bnxt_qplib_query_srq
Kalesh AP kalesh-anakkur.purayil@broadcom.com RDMA/bnxt_re: Return error for SRQ resize
Zhipeng Lu alexious@zju.edu.cn IB/hfi1: Fix a memleak in init_credit_return
Sohaib Nadeem sohaib.nadeem@amd.com Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"
Srinivasan Shanmugam srinivasan.shanmugam@amd.com drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
Nathan Chancellor nathan@kernel.org drm/amd/display: Avoid enum conversion warning
Steve French stfrench@microsoft.com smb3: add missing null server pointer check
Lennert Buytenhek kernel@wantstofly.org ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: unique 'cestab' subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: unique 'in use' subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: fix bash warnings on older kernels
Geliang Tang geliang.tang@linux.dev selftests: mptcp: diag: check CURRESTAB counters
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: pm nl: avoid error msg on older kernels
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: pm nl: also list skipped tests
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: simult flows: fix some subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: userspace_pm: unique subtest names
Paolo Abeni pabeni@redhat.com mptcp: fix duplicate subflow creation
Paolo Abeni pabeni@redhat.com mptcp: fix data races on remote_id
Paolo Abeni pabeni@redhat.com mptcp: fix data races on local_id
Paolo Abeni pabeni@redhat.com mptcp: fix lockless access in subflow ULP diag
Geliang Tang tanggeliang@kylinos.cn mptcp: add needs_id for netlink appending addr
Geliang Tang tanggeliang@kylinos.cn mptcp: add needs_id for userspace appending addr
Xu Yang xu.yang_2@nxp.com usb: roles: don't get/set_role() when usb_role_switch is unregistered
Xu Yang xu.yang_2@nxp.com usb: roles: fix NULL pointer issue when put module's reference
Aaro Koskinen aaro.koskinen@iki.fi usb: gadget: omap_udc: fix USB gadget regression on Palm TE
Krishna Kurapati quic_kriskura@quicinc.com usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
Frank Li Frank.Li@nxp.com usb: cdns3: fix memory double free when handle zero packet
Frank Li Frank.Li@nxp.com usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
Pawel Laszczak pawell@cadence.com usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
Pawel Laszczak pawell@cadence.com usb: cdnsp: blocked some cdns3 specific code
Thinh Nguyen Thinh.Nguyen@synopsys.com usb: dwc3: gadget: Don't disconnect if not started
Lino Sanfilippo l.sanfilippo@kunbus.com serial: amba-pl011: Fix DMA transmission in RS485 mode
Lino Sanfilippo l.sanfilippo@kunbus.com serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
Ondrej Jirman megi@xff.cz Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
Sandeep Dhavale dhavale@google.com erofs: fix refcount on the metabuf used for inode lookup
Arnd Bergmann arnd@arndb.de dm-integrity, dm-verity: reduce stack usage for recheck
Nikita Shubin nikita.shubin@maquefel.me ARM: ep93xx: Add terminator to gpiod_lookup_table
Tom Parkin tparkin@katalix.com l2tp: pass correct message length to ip6_append_data
Vidya Sagar vidyas@nvidia.com PCI/MSI: Prevent MSI hardware interrupt number truncation
Nam Cao namcao@linutronix.de irqchip/sifive-plic: Enable interrupt if needed before EOI
Oliver Upton oliver.upton@linux.dev irqchip/gic-v3-its: Do not assume vPE tables are preallocated
Chen Jun chenjun102@huawei.com irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
zhenwei pi pizhenwei@bytedance.com crypto: virtio/akcipher - Fix stack overflow on memcpy
Vasiliy Kovalev kovalev@altlinux.org gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
Andrzej Kacprowski Andrzej.Kacprowski@intel.com accel/ivpu: Don't enable any tiles by default on VPU40xx
Oliver Upton oliver.upton@linux.dev KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
Oliver Upton oliver.upton@linux.dev KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
Yu Kuai yukuai3@huawei.com md: Fix missing release of 'active_io' for flush
Yu Kuai yukuai3@huawei.com md: Don't suspend the array for interrupted reshape
Yu Kuai yukuai3@huawei.com md: Don't register sync_thread for reshape directly
Yu Kuai yukuai3@huawei.com md: Make sure md_do_sync() will set MD_RECOVERY_DONE
Yu Kuai yukuai3@huawei.com md: Don't ignore read-only array in md_check_recovery()
Yu Kuai yukuai3@huawei.com md: Don't ignore suspended array in md_check_recovery()
Javier Martinez Canillas javierm@redhat.com sparc: Fix undefined reference to fb_is_primary_device
Baokun Li libaokun1@huawei.com cachefiles: fix memory leak in cachefiles_add_cache()
Hans de Goede hdegoede@redhat.com platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
Hans de Goede hdegoede@redhat.com platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
Hans de Goede hdegoede@redhat.com platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
Anshuman Khandual anshuman.khandual@arm.com mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
SeongJae Park sj@kernel.org mm/damon/reclaim: fix quota stauts loss due to online tunings
SeongJae Park sj@kernel.org mm/damon/core: check apply interval in damon_do_apply_schemes()
Johannes Weiner hannes@cmpxchg.org mm: memcontrol: clarify swapaccount=0 deprecation warning
SeongJae Park sj@kernel.org mm/damon/lru_sort: fix quota status loss due to online tunings
Kairui Song kasong@tencent.com mm/swap: fix race when skipping swapcache
Terry Tritton terry.tritton@linaro.org selftests/mm: uffd-unit-test check if huge page size is 0
Martin K. Petersen martin.petersen@oracle.com scsi: core: Consult supported VPD page list prior to fetching page
Naohiro Aota naohiro.aota@wdc.com scsi: target: pscsi: Fix bio_put() for error case
Martin K. Petersen martin.petersen@oracle.com scsi: sd: usb_storage: uas: Access media prior to querying device properties
Robert Richter rrichter@amd.com cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
Li Ming ming4.li@intel.com cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
Dan Williams dan.j.williams@intel.com cxl/acpi: Fix load failures due to single window creation failure
Mikulas Patocka mpatocka@redhat.com dm-verity: recheck the hash after a failure
Mikulas Patocka mpatocka@redhat.com dm-crypt: don't modify the data when using authenticated encryption
Mikulas Patocka mpatocka@redhat.com dm-integrity: recheck the integrity tag after a failure
Helge Deller deller@gmx.de Revert "parisc: Only list existing CPUs in cpu_possible_mask"
Mikulas Patocka mpatocka@redhat.com dm-crypt: recheck the integrity tag after a failure
Guenter Roeck linux@roeck-us.net lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
Bart Van Assche bvanassche@acm.org fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
Damien Le Moal dlemoal@kernel.org ata: libata-core: Do not call ata_dev_power_set_standby() twice
Damien Le Moal dlemoal@kernel.org ata: libata-core: Do not try to set sleeping devices to standby
Peter Oberparleiter oberpar@linux.ibm.com s390/cio: fix invalid -EBUSY on ccw_device_start
Ma Jun Jun.Ma2@amd.com drm/amdgpu: Fix the runtime resume failure issue
Wayne Lin wayne.lin@amd.com drm/amd/display: adjust few initialization order in dm
Lewis Huang lewis.huang@amd.com drm/amd/display: Only allow dig mapping to pwrseq in new asic
Arunpravin Paneer Selvam Arunpravin.PaneerSelvam@amd.com drm/buddy: Modify duplicate list_splice_tail call
Martin Blumenstingl martin.blumenstingl@googlemail.com drm/meson: Don't remove bridges which are created by other drivers
Thomas Hellström thomas.hellstrom@linux.intel.com drm/ttm: Fix an invalid freeing on already freed page in error path
Qu Wenruo wqu@suse.com btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
Huacai Chen chenhuacai@kernel.org LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
Huacai Chen chenhuacai@kernel.org LoongArch: Disable IRQ before init_fn() for nonboot CPUs
Huacai Chen chenhuacai@kernel.org LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
Jonathan Corbet corbet@lwn.net docs: Instruct LaTeX to cope with deeper nesting
Pawan Gupta pawan.kumar.gupta@linux.intel.com x86/bugs: Add asm helpers for executing VERW
David Gow davidgow@google.com kunit: Add a macro to wrap a deferred action function
Daniel Vacek neelx@redhat.com IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
Sohaib Nadeem sohaib.nadeem@amd.com drm/amd/display: fixed integer types and null check locations
Peichen Huang peichen.huang@amd.com drm/amd/display: Request usb4 bw for mst streams
Meenakshikumar Somasundaram meenakshikumar.somasundaram@amd.com drm/amd/display: Add dpia display mode validation logic
Paolo Abeni pabeni@redhat.com mptcp: corner case locking for rx path fields initialization
Paolo Abeni pabeni@redhat.com mptcp: fix more tx path fields initialization
Geliang Tang geliang.tang@linux.dev mptcp: use mptcp_set_state
Geliang Tang geliang.tang@linux.dev mptcp: add CurrEstab MIB counter support
Steve French stfrench@microsoft.com smb3: clarify mount warning
Shyam Prasad N sprasad@microsoft.com cifs: handle cases where multiple sessions share connection
Shyam Prasad N sprasad@microsoft.com cifs: change tcon status when need_reconnect is set on it
Yi Sun yi.sun@unisoc.com virtio-blk: Ensure no requests in virtqueues before deleting vqs.
Paulo Alcantara pc@manguebit.com smb: client: set correct d_type for reparse points under DFS mounts
Lijo Lazar lijo.lazar@amd.com drm/amdgpu: Fix HDP flush for VFs on nbio v7.9
Stanley.Yang Stanley.Yang@amd.com drm/amdgpu: Fix shared buff copy to user
Prike Liang Prike.Liang@amd.com drm/amdgpu: reset gpu for s3 suspend abort case
Prike Liang Prike.Liang@amd.com drm/amdgpu: skip to program GFXDEC registers for suspend abort
Xiubo Li xiubli@redhat.com ceph: always check dir caps asynchronously
Xiubo Li xiubli@redhat.com libceph: fail sparse-read if the data length doesn't match
Takashi Sakamoto o-takashi@sakamocchi.jp firewire: core: send bus reset promptly on gap count error
Krystian Pradzynski krystian.pradzynski@intel.com accel/ivpu/40xx: Stop passing SKU boot parameters to FW
Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com accel/ivpu: Disable d3hot_delay on all NPU generations
Wachowski, Karol karol.wachowski@intel.com accel/ivpu: Force snooping for MMU writes
Kees Cook keescook@chromium.org LoongArch: vDSO: Disable UBSAN instrumentation
Huacai Chen chenhuacai@kernel.org LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]
Masahiro Yamada masahiroy@kernel.org LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu
Masahiro Yamada masahiroy@kernel.org LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it
SEO HOYOUNG hy50.seo@samsung.com scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()
Alice Chao alice.chao@mediatek.com scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
Hannes Reinecke hare@suse.de scsi: lpfc: Use unsigned type for num_sge
Timur Tabi ttabi@nvidia.com drm/nouveau: nvkm_gsp_radix3_sg() should use nvkm_gsp_mem_ctor()
Zhang Rui rui.zhang@intel.com hwmon: (coretemp) Enlarge per package core count limit
Andrew Bresticker abrestic@rivosinc.com efi: Don't add memblocks for soft-reserved memory
Andrew Bresticker abrestic@rivosinc.com efi: runtime: Fix potential overflow of soft-reserved region size
Benjamin Berg benjamin.berg@intel.com wifi: iwlwifi: do not announce EPCS support
Johannes Berg johannes.berg@intel.com wifi: mac80211: accept broadcast probe responses on 6 GHz
Johannes Berg johannes.berg@intel.com wifi: mac80211: adding missing drv_mgd_complete_tx() call
Johannes Berg johannes.berg@intel.com wifi: mac80211: initialize SMPS mode correctly
Johannes Berg johannes.berg@intel.com wifi: mac80211: fix driver debugfs for vif type change
Johannes Berg johannes.berg@intel.com wifi: mac80211: set station RX-NSS on reconfig
Edward Adam Davis eadavis@qq.com fs/ntfs3: Fix oob in ntfs_listxattr
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Update inode->i_size after success write into compressed file
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fixed overflow check in mi_enum_attr()
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct function is_rst_area_valid
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Use i_size_read and i_size_write
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Prevent generic message "attempt to access beyond end of device"
Ism Hong ism.hong@gmail.com fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Use kvfree to free memory allocated by kvmalloc
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Disable ATTR_LIST_ENTRY size check
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix c/mtime typo
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame()
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add and fix comments
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: ntfs3_forced_shutdown use int instead of bool
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Implement super_operations::shutdown
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Drop suid and sgid bits as a part of fpunch
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add file_modified
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct use bh_read
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix detected field-spanning write (size 8) of single field "le->name"
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix multithreaded stress test
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Reduce stack usage
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Print warning while fixing hard links count
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct hard links updating when dealing with DOS names
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Improve ntfs_dir_count
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Modified fix directory element type detection
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Improve alternative boot processing
Szilard Fabian szfabian@bluemarch.art Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
Zhang Yi yi.zhang@huawei.com ext4: correct the hole length returned by ext4_map_blocks()
Paulo Alcantara pc@manguebit.com smb: client: increase number of PDUs allowed in a compound request
Shyam Prasad N sprasad@microsoft.com cifs: do not search for channel if server is terminating
Daniel Wagner dwagner@suse.de nvmet-fc: take ref count on tgtport before delete assoc
Daniel Wagner dwagner@suse.de nvmet-fc: avoid deadlock on delete association path
Daniel Wagner dwagner@suse.de nvmet-fc: abort command when there is no binding
Daniel Wagner dwagner@suse.de nvmet-fc: hold reference on hostport match
Daniel Wagner dwagner@suse.de nvmet-fc: free queue and assoc directly
Daniel Wagner dwagner@suse.de nvmet-fc: defer cleanup using RCU properly
Daniel Wagner dwagner@suse.de nvmet-fc: release reference on target port
Daniel Wagner dwagner@suse.de nvmet-fcloop: swap the list_add_tail arguments
Daniel Wagner dwagner@suse.de nvme-fc: do not wait in vain when unloading module
Alexander Tsoy alexander@tsoy.me ALSA: usb-audio: Ignore clock selector errors for single connection
Richard Fitzgerald rf@opensource.cirrus.com ASoC: wm_adsp: Don't overwrite fwf_name with the default
Shyam Prasad N sprasad@microsoft.com cifs: make sure that channel scaling is done only once
Dmytro Laktyushkin dmytro.laktyushkin@amd.com drm/amd/display: Fix DPSTREAM CLK on and off sequence
Charlene Liu charlene.liu@amd.com drm/amd/display: fix USB-C flag update after enc10 feature init
Sohaib Nadeem sohaib.nadeem@amd.com drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz
Mukul Joshi mukul.joshi@amd.com drm/amdkfd: Use correct drm device for cgroup permission check
Xin Long lucien.xin@gmail.com netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
Will Deacon will@kernel.org misc: open-dice: Fix spurious lockdep warning
Brenton Simpson appsforartists@google.com Input: xpad - add Lenovo Legion Go controllers
Wolfram Sang wsa+renesas@sang-engineering.com spi: sh-msiof: avoid integer overflow in constants
Patrick Rudolph patrick.rudolph@9elements.com regulator (max5970): Fix IRQ handler
Chhayly Leang clw.leang@gmail.com ALSA: hda: cs35l41: Support ASUS Zenbook UM3402YAR
Kenzo Gomez kenzo.sgomez@gmail.com ALSA: hda: cs35l41: Support additional ASUS Zenbook UX3402VA
Chen-Yu Tsai wens@csie.org ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
Alexander Tsoy alexander@tsoy.me ALSA: usb-audio: Check presence of valid altsetting control
Christian A. Ehrhardt lk@c--e.de usb: ucsi_acpi: Quirk to ack a connector change ack cmd
Guixin Liu kanie@linux.alibaba.com nvmet-tcp: fix nvme tcp ida memory leak
Kunwu Chan chentao@kylinos.cn HID: nvidia-shield: Add missing null pointer checks to LED initialization
Rui Salvaterra rsalvaterra@gmail.com ALSA: hda: Increase default bdl_pos_adj for Apollo Lake
Rui Salvaterra rsalvaterra@gmail.com ALSA: hda: Replace numeric device IDs with constant values
Jiri Kosina jikos@kernel.org HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
Martin Blumenstingl martin.blumenstingl@googlemail.com regulator: pwm-regulator: Add validity checks in continuous .get_voltage
Venkata Prasad Potturu venkataprasad.potturu@amd.com ASoC: amd: acp: Add check for cpu dai link initialization
Kunwu Chan chentao@kylinos.cn dmaengine: ti: edma: Add some null pointer checks to the edma_probe
Hans de Goede hdegoede@redhat.com Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
Baokun Li libaokun1@huawei.com ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
Baokun Li libaokun1@huawei.com ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
Baokun Li libaokun1@huawei.com ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
Phoenix Chen asbeltogf@gmail.com platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
Huang Pei huangpei@loongson.cn MIPS: reserve exception vector space ONLY ONCE
Roman Li Roman.Li@amd.com drm/amd/display: Disable ips before dc interrupt setting
Lukas Wunner lukas@wunner.de ARM: dts: Fix TPM schema violations
Lennert Buytenhek kernel@wantstofly.org ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
Charles Keepax ckeepax@opensource.cirrus.com spi: cs42l43: Handle error from devm_pm_runtime_enable
Maksim Kiselev bigunclemax@gmail.com aoe: avoid potential deadlock at set_capacity
Conrad Kostecki conikost@gentoo.org ahci: asm1166: correct count of reported ports
Shyam Prasad N sprasad@microsoft.com cifs: helper function to check replayable error codes
Shyam Prasad N sprasad@microsoft.com cifs: translate network errors on send to -ECONNABORTED
Shyam Prasad N sprasad@microsoft.com cifs: cifs_pick_channel should try selecting active channels
Kees Cook keescook@chromium.org smb: Work around Clang __bdos() type confusion
Christian A. Ehrhardt lk@c--e.de block: Fix WARNING in _copy_from_iter
Devyn Liu liudingyuan@huawei.com spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
Mika Westerberg mika.westerberg@linux.intel.com spi: intel-pci: Add support for Arrow Lake SPI serial flash
Liming Sun limings@nvidia.com platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
Fullway Wang fullwaywang@outlook.com fbdev: sis: Error out if pixclock equals zero
Fullway Wang fullwaywang@outlook.com fbdev: savage: Error out if pixclock equals zero
Felix Fietkau nbd@nbd.name wifi: mac80211: fix race condition on enabling fast-xmit
Michal Kazior michal@plume.com wifi: cfg80211: fix missing interfaces when dumping
Vinod Koul vkoul@kernel.org dmaengine: dw-edma: increase size of 'name' in debugfs code
Vinod Koul vkoul@kernel.org dmaengine: fsl-qdma: increase size of 'irq_name'
Vinod Koul vkoul@kernel.org dmaengine: shdma: increase size of 'dev_id'
Shyam Prasad N sprasad@microsoft.com cifs: open_cached_dir should not rely on primary channel
Dmitry Bogdanov d.bogdanov@yadro.com scsi: target: core: Add TMF to tmr_list handling
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in mm tests
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in vector tests
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in cbo
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in hwprobe
Mahesh Rajashekhara mahesh.rajashekhara@microchip.com scsi: smartpqi: Fix logical volume rescan race condition
David Strahan david.strahan@microchip.com scsi: smartpqi: Add new controller PCI IDs
Hector Martin marcan@marcan.st dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
Mario Limonciello mario.limonciello@amd.com drm/amd: Stop evicting resources on APUs in suspend
-------------
Diffstat:
Documentation/conf.py | 6 + Documentation/dev-tools/kunit/usage.rst | 10 +- Makefile | 4 +- .../dts/aspeed/aspeed-bmc-facebook-bletchley.dts | 4 +- .../dts/aspeed/aspeed-bmc-facebook-wedge400.dts | 4 +- arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 2 +- .../dts/aspeed/ast2600-facebook-netbmc-common.dtsi | 4 +- .../arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi | 2 +- .../boot/dts/nxp/imx/imx7d-flex-concentrator.dts | 2 +- .../dts/ti/omap/am335x-moxa-uc-2100-common.dtsi | 2 +- arch/arm/mach-ep93xx/core.c | 1 + .../dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +- .../dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 9 +- arch/arm64/boot/dts/rockchip/px30.dtsi | 2 + .../boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 10 +- arch/arm64/include/asm/fpsimd.h | 2 + arch/arm64/kernel/fpsimd.c | 16 ++ arch/arm64/kernel/suspend.c | 3 + arch/arm64/kvm/vgic/vgic-its.c | 5 + arch/loongarch/Kconfig | 23 +-- arch/loongarch/include/asm/acpi.h | 4 +- arch/loongarch/kernel/acpi.c | 4 +- arch/loongarch/kernel/setup.c | 4 +- arch/loongarch/kernel/smp.c | 122 ++++++----- arch/loongarch/vdso/Makefile | 1 + arch/mips/kernel/traps.c | 8 +- arch/parisc/kernel/processor.c | 8 - arch/parisc/kernel/unwind.c | 14 +- arch/powerpc/include/asm/ppc-pci.h | 10 + arch/powerpc/kernel/iommu.c | 23 ++- arch/powerpc/kvm/book3s_hv.c | 26 ++- arch/powerpc/kvm/book3s_hv_nestedv2.c | 20 +- arch/powerpc/platforms/pseries/pci_dlpar.c | 4 + arch/s390/pci/pci.c | 2 +- arch/sparc/Makefile | 2 +- arch/sparc/video/Makefile | 2 +- arch/x86/entry/entry.S | 23 +++ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/include/asm/nospec-branch.h | 13 ++ arch/x86/kernel/traps.c | 2 +- arch/x86/mm/numa.c | 21 +- block/blk-map.c | 13 +- drivers/accel/ivpu/ivpu_drv.c | 5 +- drivers/accel/ivpu/ivpu_hw_37xx.c | 2 +- drivers/accel/ivpu/ivpu_hw_40xx.c | 9 +- drivers/accel/ivpu/ivpu_mmu.c | 3 - drivers/ata/ahci.c | 44 +++- drivers/ata/ahci.h | 1 + drivers/ata/ahci_ceva.c | 125 ++++++----- drivers/ata/libata-core.c | 87 ++++---- drivers/block/aoe/aoeblk.c | 5 +- drivers/block/virtio_blk.c | 7 +- drivers/bus/imx-weim.c | 2 +- drivers/cache/ax45mp_cache.c | 4 + .../crypto/virtio/virtio_crypto_akcipher_algs.c | 5 +- drivers/cxl/acpi.c | 46 +++-- drivers/cxl/core/pci.c | 49 +++-- drivers/dma/apple-admac.c | 5 +- drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 4 +- drivers/dma/dw-edma/dw-hdma-v0-debugfs.c | 4 +- drivers/dma/fsl-qdma.c | 2 +- drivers/dma/sh/shdma.h | 2 +- drivers/dma/ti/edma.c | 10 + drivers/firewire/core-card.c | 18 +- drivers/firmware/efi/arm-runtime.c | 2 +- drivers/firmware/efi/efi-init.c | 19 +- drivers/firmware/efi/riscv-runtime.c | 2 +- drivers/gpio/gpiolib.c | 5 + drivers/gpu/drm/amd/amdgpu/amdgpu.h | 4 + drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 18 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 11 +- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 + drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c | 2 +- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 8 + drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c | 6 + drivers/gpu/drm/amd/amdgpu/soc15.c | 22 ++ drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 9 +- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 57 +++--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c | 5 +- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 16 +- .../gpu/drm/amd/display/dc/core/dc_link_exports.c | 2 +- drivers/gpu/drm/amd/display/dc/dc.h | 4 +- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 7 +- drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 6 + drivers/gpu/drm/amd/display/dc/dc_types.h | 14 +- .../gpu/drm/amd/display/dc/dce/dce_panel_cntl.c | 1 + .../drm/amd/display/dc/dcn301/dcn301_panel_cntl.c | 1 + .../drm/amd/display/dc/dcn31/dcn31_panel_cntl.c | 18 +- .../amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 4 +- .../amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 +- .../drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 2 +- .../drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 11 +- drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h | 2 +- drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 42 +++- drivers/gpu/drm/amd/display/dc/link/link_factory.c | 26 +-- .../gpu/drm/amd/display/dc/link/link_validation.c | 60 +++++- .../display/dc/link/protocols/link_dp_dpia_bw.c | 178 ++++++++++++---- .../display/dc/link/protocols/link_dp_dpia_bw.h | 9 + drivers/gpu/drm/drm_buddy.c | 4 +- drivers/gpu/drm/drm_syncobj.c | 19 +- drivers/gpu/drm/i915/display/intel_sdvo.c | 10 +- drivers/gpu/drm/i915/display/intel_tv.c | 10 +- drivers/gpu/drm/meson/meson_encoder_cvbs.c | 1 - drivers/gpu/drm/meson/meson_encoder_dsi.c | 1 - drivers/gpu/drm/meson/meson_encoder_hdmi.c | 1 - drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c | 5 +- drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c | 8 +- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 18 +- drivers/gpu/drm/ttm/ttm_pool.c | 2 +- drivers/hid/hid-logitech-hidpp.c | 2 + drivers/hid/hid-nvidia-shield.c | 4 + drivers/hwmon/coretemp.c | 2 +- drivers/hwmon/nct6775-core.c | 14 +- drivers/i2c/busses/i2c-imx.c | 5 + drivers/infiniband/hw/bnxt_re/ib_verbs.c | 5 +- drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 +- drivers/infiniband/hw/hfi1/pio.c | 6 +- drivers/infiniband/hw/hfi1/sdma.c | 2 +- drivers/infiniband/hw/irdma/defs.h | 1 + drivers/infiniband/hw/irdma/hw.c | 8 + drivers/infiniband/hw/irdma/verbs.c | 9 +- drivers/infiniband/hw/mlx5/cong.c | 6 + drivers/infiniband/hw/qedr/verbs.c | 11 +- drivers/infiniband/ulp/srpt/ib_srpt.c | 17 +- drivers/input/joystick/xpad.c | 2 + drivers/input/serio/i8042-acpipnpio.h | 8 + drivers/input/touchscreen/goodix.c | 3 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 45 ++-- drivers/iommu/intel/iommu.c | 87 ++++++-- drivers/iommu/intel/iommu.h | 7 + drivers/iommu/intel/nested.c | 14 +- drivers/iommu/intel/pasid.c | 5 +- drivers/iommu/intel/pasid.h | 1 - drivers/iommu/iommu-sva.c | 2 +- drivers/iommu/iommufd/hw_pagetable.c | 3 +- drivers/iommu/iommufd/iova_bitmap.c | 68 +++++- drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/irqchip/irq-mbigen.c | 8 +- drivers/irqchip/irq-sifive-plic.c | 8 +- drivers/md/dm-crypt.c | 95 +++++++-- drivers/md/dm-integrity.c | 91 +++++++- drivers/md/dm-verity-target.c | 86 +++++++- drivers/md/dm-verity.h | 6 + drivers/md/md.c | 70 ++++--- drivers/md/raid10.c | 16 +- drivers/md/raid5.c | 29 +-- drivers/misc/open-dice.c | 2 +- drivers/net/ethernet/adi/Kconfig | 1 + drivers/net/ethernet/broadcom/asp2/bcmasp.c | 6 +- drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c | 3 + .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 4 + .../net/ethernet/microchip/sparx5/sparx5_main.c | 1 + .../net/ethernet/microchip/sparx5/sparx5_main.h | 1 + .../net/ethernet/microchip/sparx5/sparx5_packet.c | 2 + drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 -- drivers/net/gtp.c | 10 +- drivers/net/ipa/ipa_interrupt.c | 2 +- drivers/net/phy/realtek.c | 4 +- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 5 +- drivers/nvme/host/fc.c | 47 +---- drivers/nvme/target/fc.c | 137 +++++++------ drivers/nvme/target/fcloop.c | 6 +- drivers/nvme/target/tcp.c | 1 + drivers/pci/msi/irqdomain.c | 2 +- drivers/platform/mellanox/mlxbf-tmfifo.c | 67 ++++++ drivers/platform/x86/intel/vbtn.c | 3 - drivers/platform/x86/think-lmi.c | 20 +- drivers/platform/x86/thinkpad_acpi.c | 5 +- drivers/platform/x86/touchscreen_dmi.c | 39 +++- drivers/platform/x86/x86-android-tablets/core.c | 3 + drivers/platform/x86/x86-android-tablets/lenovo.c | 1 + .../x86/x86-android-tablets/x86-android-tablets.h | 1 + drivers/regulator/max5970-regulator.c | 2 +- drivers/regulator/pwm-regulator.c | 3 + drivers/s390/cio/device_ops.c | 6 +- drivers/scsi/Kconfig | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 12 +- drivers/scsi/scsi.c | 22 +- drivers/scsi/sd.c | 26 ++- drivers/scsi/smartpqi/smartpqi.h | 1 - drivers/scsi/smartpqi/smartpqi_init.c | 88 +++++++- drivers/spi/spi-cs42l43.c | 5 +- drivers/spi/spi-hisi-sfc-v3xx.c | 5 + drivers/spi/spi-intel-pci.c | 1 + drivers/spi/spi-sh-msiof.c | 16 +- drivers/target/target_core_device.c | 5 - drivers/target/target_core_pscsi.c | 9 +- drivers/target/target_core_transport.c | 4 + drivers/tty/serial/amba-pl011.c | 60 +++--- drivers/tty/serial/stm32-usart.c | 4 +- drivers/ufs/core/ufshcd.c | 7 +- drivers/usb/cdns3/cdns3-gadget.c | 8 +- drivers/usb/cdns3/core.c | 1 - drivers/usb/cdns3/drd.c | 13 +- drivers/usb/cdns3/drd.h | 6 +- drivers/usb/cdns3/host.c | 16 +- drivers/usb/dwc3/gadget.c | 5 + drivers/usb/gadget/function/f_ncm.c | 10 +- drivers/usb/gadget/udc/omap_udc.c | 3 +- drivers/usb/roles/class.c | 29 ++- drivers/usb/storage/scsiglue.c | 7 + drivers/usb/storage/uas.c | 7 + drivers/usb/typec/tcpm/tcpm.c | 3 - drivers/usb/typec/ucsi/ucsi_acpi.c | 71 ++++++- drivers/video/fbdev/savage/savagefb_driver.c | 3 + drivers/video/fbdev/sis/sis_main.c | 2 + fs/afs/volume.c | 4 +- fs/aio.c | 9 +- fs/btrfs/defrag.c | 2 +- fs/cachefiles/cache.c | 2 + fs/cachefiles/daemon.c | 1 + fs/ceph/caps.c | 6 - fs/ceph/mds_client.c | 9 +- fs/ceph/mds_client.h | 2 +- fs/ceph/super.h | 2 - fs/erofs/namei.c | 28 +-- fs/ext4/extents.c | 111 ++++++---- fs/ext4/mballoc.c | 15 +- fs/ntfs3/attrib.c | 45 ++-- fs/ntfs3/attrlist.c | 12 +- fs/ntfs3/bitmap.c | 4 +- fs/ntfs3/dir.c | 44 ++-- fs/ntfs3/file.c | 72 +++++-- fs/ntfs3/frecord.c | 19 +- fs/ntfs3/fslog.c | 228 ++++++++++----------- fs/ntfs3/fsntfs.c | 29 ++- fs/ntfs3/index.c | 8 +- fs/ntfs3/inode.c | 32 ++- fs/ntfs3/namei.c | 12 ++ fs/ntfs3/ntfs.h | 4 +- fs/ntfs3/ntfs_fs.h | 25 +-- fs/ntfs3/record.c | 18 +- fs/ntfs3/super.c | 49 +++-- fs/ntfs3/xattr.c | 6 + fs/smb/client/cached_dir.c | 3 +- fs/smb/client/cifsencrypt.c | 2 +- fs/smb/client/cifsglob.h | 12 +- fs/smb/client/connect.c | 11 + fs/smb/client/dfs.c | 7 +- fs/smb/client/file.c | 3 + fs/smb/client/fs_context.c | 2 +- fs/smb/client/readdir.c | 15 +- fs/smb/client/sess.c | 5 +- fs/smb/client/smb2pdu.c | 26 ++- fs/smb/client/transport.c | 18 +- include/kunit/resource.h | 21 ++ include/linux/ceph/osd_client.h | 3 +- include/linux/fs.h | 2 + include/linux/iommu.h | 12 ++ include/linux/memblock.h | 2 + include/linux/mlx5/mlx5_ifc.h | 2 +- include/linux/swap.h | 5 + include/net/netfilter/nf_flow_table.h | 2 +- include/net/switchdev.h | 3 + include/net/tcp.h | 2 +- include/scsi/scsi_device.h | 5 +- kernel/bpf/helpers.c | 5 +- lib/Kconfig.debug | 1 + lib/kunit/kunit-test.c | 5 +- lib/kunit/test.c | 6 +- mm/damon/core.c | 15 +- mm/damon/lru_sort.c | 43 +++- mm/damon/reclaim.c | 18 +- mm/memblock.c | 6 +- mm/memcontrol.c | 10 +- mm/memory.c | 20 ++ mm/swap.h | 5 + mm/swapfile.c | 13 ++ mm/zswap.c | 7 +- net/bridge/br_switchdev.c | 86 +++++--- net/ceph/osd_client.c | 18 +- net/core/skmsg.c | 7 +- net/core/sock.c | 23 +-- net/devlink/core.c | 12 +- net/devlink/port.c | 2 +- net/ipv4/arp.c | 3 +- net/ipv4/devinet.c | 21 +- net/ipv4/inet_hashtables.c | 25 ++- net/ipv4/udp.c | 7 +- net/ipv6/addrconf.c | 21 +- net/ipv6/exthdrs.c | 10 + net/ipv6/seg6.c | 20 +- net/l2tp/l2tp_ip6.c | 2 +- net/mac80211/cfg.c | 2 + net/mac80211/debugfs_netdev.c | 4 +- net/mac80211/debugfs_netdev.h | 5 - net/mac80211/iface.c | 2 +- net/mac80211/mlme.c | 8 +- net/mac80211/scan.c | 30 +-- net/mac80211/sta_info.c | 2 + net/mac80211/tx.c | 2 +- net/mctp/route.c | 2 +- net/mptcp/diag.c | 8 +- net/mptcp/fastopen.c | 6 +- net/mptcp/mib.c | 1 + net/mptcp/mib.h | 8 + net/mptcp/options.c | 9 +- net/mptcp/pm_netlink.c | 74 ++++--- net/mptcp/pm_userspace.c | 15 +- net/mptcp/protocol.c | 69 ++++--- net/mptcp/protocol.h | 25 ++- net/mptcp/subflow.c | 86 +++++--- net/netfilter/nf_conntrack_proto_sctp.c | 2 +- net/netfilter/nf_flow_table_core.c | 17 +- net/netfilter/nf_tables_api.c | 81 ++++---- net/phonet/datagram.c | 4 +- net/phonet/pep.c | 41 +++- net/sched/act_mirred.c | 147 ++++++------- net/sched/cls_flower.c | 5 +- net/switchdev/switchdev.c | 73 +++++++ net/tls/tls_main.c | 2 +- net/tls/tls_sw.c | 24 ++- net/unix/af_unix.c | 19 +- net/wireless/nl80211.c | 1 + net/xdp/xsk.c | 3 +- scripts/bpf_doc.py | 2 +- sound/pci/hda/cs35l41_hda_property.c | 4 + sound/pci/hda/hda_intel.c | 6 +- sound/soc/amd/acp/acp-mach-common.c | 9 +- sound/soc/codecs/wm_adsp.c | 29 ++- sound/soc/sunxi/sun4i-spdif.c | 5 + sound/usb/clock.c | 10 +- sound/usb/format.c | 20 ++ tools/net/ynl/lib/ynl.c | 19 +- .../selftests/drivers/net/bonding/bond_options.sh | 2 + tools/testing/selftests/iommu/config | 5 +- tools/testing/selftests/mm/uffd-unit-tests.c | 6 + .../testing/selftests/net/forwarding/tc_actions.sh | 3 - tools/testing/selftests/net/mptcp/diag.sh | 46 ++++- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 41 ++-- tools/testing/selftests/net/mptcp/mptcp_join.sh | 109 ++++------ tools/testing/selftests/net/mptcp/mptcp_lib.sh | 16 ++ tools/testing/selftests/net/mptcp/pm_netlink.sh | 8 +- tools/testing/selftests/net/mptcp/simult_flows.sh | 3 +- tools/testing/selftests/net/mptcp/userspace_pm.sh | 18 +- tools/testing/selftests/riscv/hwprobe/cbo.c | 6 +- tools/testing/selftests/riscv/hwprobe/hwprobe.c | 4 +- tools/testing/selftests/riscv/mm/mmap_test.h | 3 + .../selftests/riscv/vector/v_initval_nolibc.c | 2 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 4 +- 340 files changed, 3847 insertions(+), 1826 deletions(-)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello mario.limonciello@amd.com
commit 3a9626c816db901def438dc2513622e281186d39 upstream.
commit 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") intentionally moved the eviction of resources to earlier in the suspend process, but this introduced a subtle change that it occurs before adev->in_s0ix or adev->in_s3 are set. This meant that APUs actually started to evict resources at suspend time as well.
Explicitly set s0ix or s3 in the prepare() stage, and unset them if the prepare() stage failed.
v2: squash in warning fix from Stephen Rothwell
Reported-by: Jürg Billeter j@bitron.ch Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132#note_2271038 Fixes: 5095d5418193 ("drm/amd: Evict resources during PM ops prepare() callback") Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 2 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 15 +++++++++++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 11 +++++++++-- 3 files changed, 26 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1509,9 +1509,11 @@ static inline int amdgpu_acpi_smart_shif #if defined(CONFIG_ACPI) && defined(CONFIG_SUSPEND) bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev); bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev); +void amdgpu_choose_low_power_state(struct amdgpu_device *adev); #else static inline bool amdgpu_acpi_is_s0ix_active(struct amdgpu_device *adev) { return false; } static inline bool amdgpu_acpi_is_s3_active(struct amdgpu_device *adev) { return false; } +static inline void amdgpu_choose_low_power_state(struct amdgpu_device *adev) { } #endif
#if defined(CONFIG_DRM_AMD_DC) --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c @@ -1519,4 +1519,19 @@ bool amdgpu_acpi_is_s0ix_active(struct a #endif /* CONFIG_AMD_PMC */ }
+/** + * amdgpu_choose_low_power_state + * + * @adev: amdgpu_device_pointer + * + * Choose the target low power state for the GPU + */ +void amdgpu_choose_low_power_state(struct amdgpu_device *adev) +{ + if (amdgpu_acpi_is_s0ix_active(adev)) + adev->in_s0ix = true; + else if (amdgpu_acpi_is_s3_active(adev)) + adev->in_s3 = true; +} + #endif /* CONFIG_SUSPEND */ --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -4441,13 +4441,15 @@ int amdgpu_device_prepare(struct drm_dev struct amdgpu_device *adev = drm_to_adev(dev); int i, r;
+ amdgpu_choose_low_power_state(adev); + if (dev->switch_power_state == DRM_SWITCH_POWER_OFF) return 0;
/* Evict the majority of BOs before starting suspend sequence */ r = amdgpu_device_evict_resources(adev); if (r) - return r; + goto unprepare;
for (i = 0; i < adev->num_ip_blocks; i++) { if (!adev->ip_blocks[i].status.valid) @@ -4456,10 +4458,15 @@ int amdgpu_device_prepare(struct drm_dev continue; r = adev->ip_blocks[i].version->funcs->prepare_suspend((void *)adev); if (r) - return r; + goto unprepare; }
return 0; + +unprepare: + adev->in_s0ix = adev->in_s3 = false; + + return r; }
/**
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hector Martin marcan@marcan.st
[ Upstream commit 306f5df81fcc89b462fbeb9dbe26d9a8ad7c7582 ]
For RX channels, REG_BUS_WIDTH seems to default to a value of 0xf00, and macOS preserves the upper bits when setting the configuration in the lower ones. If we reset the upper bits to 0, this causes framing errors on suspend/resume (the data stream "tears" and channels get swapped around). Keeping the upper bits untouched, like the macOS driver does, fixes this issue.
Signed-off-by: Hector Martin marcan@marcan.st Reviewed-by: Martin Povišer povik+lin@cutebit.org Signed-off-by: Martin Povišer povik+lin@cutebit.org Link: https://lore.kernel.org/r/20231029170704.82238-1-povik+lin@cutebit.org Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/apple-admac.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/apple-admac.c b/drivers/dma/apple-admac.c index 5b63996640d9d..9588773dd2eb6 100644 --- a/drivers/dma/apple-admac.c +++ b/drivers/dma/apple-admac.c @@ -57,6 +57,8 @@
#define REG_BUS_WIDTH(ch) (0x8040 + (ch) * 0x200)
+#define BUS_WIDTH_WORD_SIZE GENMASK(3, 0) +#define BUS_WIDTH_FRAME_SIZE GENMASK(7, 4) #define BUS_WIDTH_8BIT 0x00 #define BUS_WIDTH_16BIT 0x01 #define BUS_WIDTH_32BIT 0x02 @@ -740,7 +742,8 @@ static int admac_device_config(struct dma_chan *chan, struct admac_data *ad = adchan->host; bool is_tx = admac_chan_direction(adchan->no) == DMA_MEM_TO_DEV; int wordsize = 0; - u32 bus_width = 0; + u32 bus_width = readl_relaxed(ad->base + REG_BUS_WIDTH(adchan->no)) & + ~(BUS_WIDTH_WORD_SIZE | BUS_WIDTH_FRAME_SIZE);
switch (is_tx ? config->dst_addr_width : config->src_addr_width) { case DMA_SLAVE_BUSWIDTH_1_BYTE:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Strahan david.strahan@microchip.com
[ Upstream commit c6d5aa44eaf6d119f9ceb3bfc7d22405ac04232a ]
All PCI ID entries in Hex.
Add PCI IDs for Cisco controllers: VID / DID / SVID / SDID ---- ---- ---- ---- Cisco 24G TriMode M1 RAID 4GB FBWC 32D 9005 / 028f / 1137 / 02f8 Cisco 24G TriMode M1 RAID 4GB FBWC 16D 9005 / 028f / 1137 / 02f9 Cisco 24G TriMode M1 HBA 16D 9005 / 028f / 1137 / 02fa
Add PCI IDs for CloudNine controllers: VID / DID / SVID / SDID ---- ---- ---- ---- SmartRAID P7604N-16i 9005 / 028f / 1f51 / 100e SmartRAID P7604N-8i 9005 / 028f / 1f51 / 100f SmartRAID P7504N-16i 9005 / 028f / 1f51 / 1010 SmartRAID P7504N-8i 9005 / 028f / 1f51 / 1011 SmartRAID P7504N-8i 9005 / 028f / 1f51 / 1043 SmartHBA P6500-8i 9005 / 028f / 1f51 / 1044 SmartRAID P7504-8i 9005 / 028f / 1f51 / 1045
Reviewed-by: Murthy Bhat Murthy.Bhat@microchip.com Reviewed-by: Mahesh Rajashekhara mahesh.rajashekhara@microchip.com Reviewed-by: Scott Teel scott.teel@microchip.com Reviewed-by: Scott Benesh scott.benesh@microchip.com Reviewed-by: Mike McGowen mike.mcgowen@microchip.com Reviewed-by: Kevin Barnett kevin.barnett@microchip.com Signed-off-by: David Strahan david.strahan@microchip.com Signed-off-by: Don Brace don.brace@microchip.com Link: https://lore.kernel.org/r/20231219193653.277553-2-don.brace@microchip.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/smartpqi/smartpqi_init.c | 40 +++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index 9a58df9312fa7..d562011200877 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -10142,6 +10142,18 @@ static const struct pci_device_id pqi_pci_id_table[] = { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, 0x1014, 0x0718) }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1137, 0x02f8) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1137, 0x02f9) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1137, 0x02fa) + }, { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, 0x1e93, 0x1000) @@ -10198,6 +10210,34 @@ static const struct pci_device_id pqi_pci_id_table[] = { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, 0x1f51, 0x100a) }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1f51, 0x100e) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1f51, 0x100f) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1f51, 0x1010) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1f51, 0x1011) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1f51, 0x1043) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1f51, 0x1044) + }, + { + PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, + 0x1f51, 0x1045) + }, { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f, PCI_ANY_ID, PCI_ANY_ID)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mahesh Rajashekhara mahesh.rajashekhara@microchip.com
[ Upstream commit fb4cece17b4583f55b34a8538e27a4adc833c9d4 ]
Correct rescan flag race condition.
Multiple conditions are being evaluated before notifying OS to do a rescan.
Driver will skip rescanning the device if any one of the following conditions are met:
- Devices that have not yet been added to the OS or devices that have been removed.
- Devices which are already marked for removal or in the phase of removal.
Under very rare conditions, after logical volume size expansion, the OS still sees the size of the logical volume which was before expansion.
The rescan flag in the driver is used to signal the need for a logical volume rescan. A race condition can occur in the driver, and it leads to one thread overwriting the flag inadvertently. As a result, driver is not notifying the OS SML to rescan the logical volume.
Move device->rescan update into new function pqi_mark_volumes_for_rescan() and protect with a spin lock.
Move check for device->rescan into new function pqi_volume_rescan_needed() and protect function call with a spin_lock.
Reviewed-by: Scott Teel scott.teel@microchip.com Reviewed-by: Scott Benesh scott.benesh@microchip.com Reviewed-by: Mike McGowen mike.mcgowen@microchip.com Reviewed-by: Kevin Barnett kevin.barnett@microchip.com Co-developed-by: Murthy Bhat Murthy.Bhat@microchip.com Signed-off-by: Murthy Bhat Murthy.Bhat@microchip.com Signed-off-by: Mahesh Rajashekhara mahesh.rajashekhara@microchip.com Signed-off-by: Don Brace don.brace@microchip.com Link: https://lore.kernel.org/r/20231219193653.277553-3-don.brace@microchip.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/smartpqi/smartpqi.h | 1 - drivers/scsi/smartpqi/smartpqi_init.c | 43 ++++++++++++++++++++++----- 2 files changed, 36 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h index 0419401835169..cdedc271857aa 100644 --- a/drivers/scsi/smartpqi/smartpqi.h +++ b/drivers/scsi/smartpqi/smartpqi.h @@ -1347,7 +1347,6 @@ struct pqi_ctrl_info { bool controller_online; bool block_requests; bool scan_blocked; - u8 logical_volume_rescan_needed : 1; u8 inbound_spanning_supported : 1; u8 outbound_spanning_supported : 1; u8 pqi_mode_enabled : 1; diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index d562011200877..081bb2c098063 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -2093,8 +2093,6 @@ static void pqi_scsi_update_device(struct pqi_ctrl_info *ctrl_info, if (existing_device->devtype == TYPE_DISK) { existing_device->raid_level = new_device->raid_level; existing_device->volume_status = new_device->volume_status; - if (ctrl_info->logical_volume_rescan_needed) - existing_device->rescan = true; memset(existing_device->next_bypass_group, 0, sizeof(existing_device->next_bypass_group)); if (!pqi_raid_maps_equal(existing_device->raid_map, new_device->raid_map)) { kfree(existing_device->raid_map); @@ -2164,6 +2162,20 @@ static inline void pqi_init_device_tmf_work(struct pqi_scsi_dev *device) INIT_WORK(&tmf_work->work_struct, pqi_tmf_worker); }
+static inline bool pqi_volume_rescan_needed(struct pqi_scsi_dev *device) +{ + if (pqi_device_in_remove(device)) + return false; + + if (device->sdev == NULL) + return false; + + if (!scsi_device_online(device->sdev)) + return false; + + return device->rescan; +} + static void pqi_update_device_list(struct pqi_ctrl_info *ctrl_info, struct pqi_scsi_dev *new_device_list[], unsigned int num_new_devices) { @@ -2284,9 +2296,13 @@ static void pqi_update_device_list(struct pqi_ctrl_info *ctrl_info, if (device->sdev && device->queue_depth != device->advertised_queue_depth) { device->advertised_queue_depth = device->queue_depth; scsi_change_queue_depth(device->sdev, device->advertised_queue_depth); - if (device->rescan) { - scsi_rescan_device(device->sdev); + spin_lock_irqsave(&ctrl_info->scsi_device_list_lock, flags); + if (pqi_volume_rescan_needed(device)) { device->rescan = false; + spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags); + scsi_rescan_device(device->sdev); + } else { + spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags); } } } @@ -2308,8 +2324,6 @@ static void pqi_update_device_list(struct pqi_ctrl_info *ctrl_info, } }
- ctrl_info->logical_volume_rescan_needed = false; - }
static inline bool pqi_is_supported_device(struct pqi_scsi_dev *device) @@ -3702,6 +3716,21 @@ static bool pqi_ofa_process_event(struct pqi_ctrl_info *ctrl_info, return ack_event; }
+static void pqi_mark_volumes_for_rescan(struct pqi_ctrl_info *ctrl_info) +{ + unsigned long flags; + struct pqi_scsi_dev *device; + + spin_lock_irqsave(&ctrl_info->scsi_device_list_lock, flags); + + list_for_each_entry(device, &ctrl_info->scsi_device_list, scsi_device_list_entry) { + if (pqi_is_logical_device(device) && device->devtype == TYPE_DISK) + device->rescan = true; + } + + spin_unlock_irqrestore(&ctrl_info->scsi_device_list_lock, flags); +} + static void pqi_disable_raid_bypass(struct pqi_ctrl_info *ctrl_info) { unsigned long flags; @@ -3742,7 +3771,7 @@ static void pqi_event_worker(struct work_struct *work) ack_event = true; rescan_needed = true; if (event->event_type == PQI_EVENT_TYPE_LOGICAL_DEVICE) - ctrl_info->logical_volume_rescan_needed = true; + pqi_mark_volumes_for_rescan(ctrl_info); else if (event->event_type == PQI_EVENT_TYPE_AIO_STATE_CHANGE) pqi_disable_raid_bypass(ctrl_info); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Müllner christoph.muellner@vrull.eu
[ Upstream commit b91c26fdb0e8150cdb610cdaadea62bb5e43bee0 ]
GCC prints a couple of format string warnings when compiling the hwprobe test. Let's follow the recommendation in Documentation/printk-formats.txt to fix these warnings.
Signed-off-by: Christoph Müllner christoph.muellner@vrull.eu Reviewed-by: Alexandre Ghiti alexghiti@rivosinc.com Reviewed-by: Andrew Jones ajones@ventanamicro.com Link: https://lore.kernel.org/r/20231123185821.2272504-2-christoph.muellner@vrull.... Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/riscv/hwprobe/hwprobe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/riscv/hwprobe/hwprobe.c b/tools/testing/selftests/riscv/hwprobe/hwprobe.c index c474891df3071..abb825811c70e 100644 --- a/tools/testing/selftests/riscv/hwprobe/hwprobe.c +++ b/tools/testing/selftests/riscv/hwprobe/hwprobe.c @@ -29,7 +29,7 @@ int main(int argc, char **argv) /* Fail if the kernel claims not to recognize a base key. */ if ((i < 4) && (pairs[i].key != i)) ksft_exit_fail_msg("Failed to recognize base key: key != i, " - "key=%ld, i=%ld\n", pairs[i].key, i); + "key=%lld, i=%ld\n", pairs[i].key, i);
if (pairs[i].key != RISCV_HWPROBE_KEY_BASE_BEHAVIOR) continue; @@ -37,7 +37,7 @@ int main(int argc, char **argv) if (pairs[i].value & RISCV_HWPROBE_BASE_BEHAVIOR_IMA) continue;
- ksft_exit_fail_msg("Unexpected pair: (%ld, %ld)\n", pairs[i].key, pairs[i].value); + ksft_exit_fail_msg("Unexpected pair: (%lld, %llu)\n", pairs[i].key, pairs[i].value); }
out = riscv_hwprobe(pairs, 8, 0, 0, 0);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Müllner christoph.muellner@vrull.eu
[ Upstream commit ac7b2a02d62faff8c6d45bacb5cb9ea565b47776 ]
GCC prints a couple of format string warnings when compiling the cbo test. Let's follow the recommendation in Documentation/printk-formats.txt to fix these warnings.
Signed-off-by: Christoph Müllner christoph.muellner@vrull.eu Reviewed-by: Alexandre Ghiti alexghiti@rivosinc.com Reviewed-by: Andrew Jones ajones@ventanamicro.com Link: https://lore.kernel.org/r/20231123185821.2272504-3-christoph.muellner@vrull.... Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/riscv/hwprobe/cbo.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/riscv/hwprobe/cbo.c b/tools/testing/selftests/riscv/hwprobe/cbo.c index c000942c80483..c537d52fafc58 100644 --- a/tools/testing/selftests/riscv/hwprobe/cbo.c +++ b/tools/testing/selftests/riscv/hwprobe/cbo.c @@ -95,7 +95,7 @@ static void test_zicboz(void *arg) block_size = pair.value; ksft_test_result(rc == 0 && pair.key == RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE && is_power_of_2(block_size), "Zicboz block size\n"); - ksft_print_msg("Zicboz block size: %ld\n", block_size); + ksft_print_msg("Zicboz block size: %llu\n", block_size);
illegal_insn = false; cbo_zero(&mem[block_size]); @@ -119,7 +119,7 @@ static void test_zicboz(void *arg) for (j = 0; j < block_size; ++j) { if (mem[i * block_size + j] != expected) { ksft_test_result_fail("cbo.zero check\n"); - ksft_print_msg("cbo.zero check: mem[%d] != 0x%x\n", + ksft_print_msg("cbo.zero check: mem[%llu] != 0x%x\n", i * block_size + j, expected); return; } @@ -199,7 +199,7 @@ int main(int argc, char **argv) pair.key = RISCV_HWPROBE_KEY_IMA_EXT_0; rc = riscv_hwprobe(&pair, 1, sizeof(cpu_set_t), (unsigned long *)&cpus, 0); if (rc < 0) - ksft_exit_fail_msg("hwprobe() failed with %d\n", rc); + ksft_exit_fail_msg("hwprobe() failed with %ld\n", rc); assert(rc == 0 && pair.key == RISCV_HWPROBE_KEY_IMA_EXT_0);
if (pair.value & RISCV_HWPROBE_EXT_ZICBOZ) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Müllner christoph.muellner@vrull.eu
[ Upstream commit e1baf5e68ed128c1e22ba43e5190526d85de323c ]
GCC prints a couple of format string warnings when compiling the vector tests. Let's follow the recommendation in Documentation/printk-formats.txt to fix these warnings.
Signed-off-by: Christoph Müllner christoph.muellner@vrull.eu Reviewed-by: Alexandre Ghiti alexghiti@rivosinc.com Reviewed-by: Andrew Jones ajones@ventanamicro.com Link: https://lore.kernel.org/r/20231123185821.2272504-5-christoph.muellner@vrull.... Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/riscv/vector/v_initval_nolibc.c | 2 +- tools/testing/selftests/riscv/vector/vstate_prctl.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/riscv/vector/v_initval_nolibc.c b/tools/testing/selftests/riscv/vector/v_initval_nolibc.c index 66764edb0d526..1dd94197da30c 100644 --- a/tools/testing/selftests/riscv/vector/v_initval_nolibc.c +++ b/tools/testing/selftests/riscv/vector/v_initval_nolibc.c @@ -27,7 +27,7 @@ int main(void)
datap = malloc(MAX_VSIZE); if (!datap) { - ksft_test_result_fail("fail to allocate memory for size = %lu\n", MAX_VSIZE); + ksft_test_result_fail("fail to allocate memory for size = %d\n", MAX_VSIZE); exit(-1); }
diff --git a/tools/testing/selftests/riscv/vector/vstate_prctl.c b/tools/testing/selftests/riscv/vector/vstate_prctl.c index b348b475be570..8ad94e08ff4d0 100644 --- a/tools/testing/selftests/riscv/vector/vstate_prctl.c +++ b/tools/testing/selftests/riscv/vector/vstate_prctl.c @@ -68,7 +68,7 @@ int test_and_compare_child(long provided, long expected, int inherit) } rc = launch_test(inherit); if (rc != expected) { - ksft_test_result_fail("Test failed, check %d != %d\n", rc, + ksft_test_result_fail("Test failed, check %d != %ld\n", rc, expected); return -2; } @@ -87,7 +87,7 @@ int main(void) pair.key = RISCV_HWPROBE_KEY_IMA_EXT_0; rc = riscv_hwprobe(&pair, 1, 0, NULL, 0); if (rc < 0) { - ksft_test_result_fail("hwprobe() failed with %d\n", rc); + ksft_test_result_fail("hwprobe() failed with %ld\n", rc); return -1; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christoph Müllner christoph.muellner@vrull.eu
[ Upstream commit 12c16919652b5873f524c8b361336ecfa5ce5e6b ]
When building the mm tests with a riscv32 compiler, we see a range of shift-count-overflow errors from shifting 1UL by more than 32 bits in do_mmaps(). Since, the relevant code is only called from code that is gated by `__riscv_xlen == 64`, we can just apply the same gating to do_mmaps().
Signed-off-by: Christoph Müllner christoph.muellner@vrull.eu Reviewed-by: Alexandre Ghiti alexghiti@rivosinc.com Reviewed-by: Andrew Jones ajones@ventanamicro.com Link: https://lore.kernel.org/r/20231123185821.2272504-6-christoph.muellner@vrull.... Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/riscv/mm/mmap_test.h | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/tools/testing/selftests/riscv/mm/mmap_test.h b/tools/testing/selftests/riscv/mm/mmap_test.h index 9b8434f62f570..2e0db9c5be6c3 100644 --- a/tools/testing/selftests/riscv/mm/mmap_test.h +++ b/tools/testing/selftests/riscv/mm/mmap_test.h @@ -18,6 +18,8 @@ struct addresses { int *on_56_addr; };
+// Only works on 64 bit +#if __riscv_xlen == 64 static inline void do_mmaps(struct addresses *mmap_addresses) { /* @@ -50,6 +52,7 @@ static inline void do_mmaps(struct addresses *mmap_addresses) mmap_addresses->on_56_addr = mmap(on_56_bits, 5 * sizeof(int), prot, flags, 0, 0); } +#endif /* __riscv_xlen == 64 */
static inline int memory_layout(void) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmitry Bogdanov d.bogdanov@yadro.com
[ Upstream commit 83ab68168a3d990d5ff39ab030ad5754cbbccb25 ]
An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core.
Unable to locate ITT: 0x05000000 on CID: 0 Unable to locate RefTaskTag: 0x05000000 on CID: 0. wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop ... INFO: task kworker/0:2:49 blocked for more than 491 seconds. task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800 Workqueue: events target_tmr_work [target_core_mod] Call Trace: __switch_to+0x2c4/0x470 _schedule+0x314/0x1730 schedule+0x64/0x130 schedule_timeout+0x168/0x430 wait_for_completion+0x140/0x270 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod] core_tmr_lun_reset+0x30/0xa0 [target_core_mod] target_tmr_work+0xc8/0x1b0 [target_core_mod] process_one_work+0x2d4/0x5d0 worker_thread+0x78/0x6c0
To fix this, only add abort to tmr_list if it will be handled by target core.
Signed-off-by: Dmitry Bogdanov d.bogdanov@yadro.com Link: https://lore.kernel.org/r/20240111125941.8688-1-d.bogdanov@yadro.com Reviewed-by: Mike Christie michael.christie@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_device.c | 5 ----- drivers/target/target_core_transport.c | 4 ++++ 2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 506193e870c49..7a85e6477e465 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -147,7 +147,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd) struct se_session *se_sess = se_cmd->se_sess; struct se_node_acl *nacl = se_sess->se_node_acl; struct se_tmr_req *se_tmr = se_cmd->se_tmr_req; - unsigned long flags;
rcu_read_lock(); deve = target_nacl_find_deve(nacl, se_cmd->orig_fe_lun); @@ -178,10 +177,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd) se_cmd->se_dev = rcu_dereference_raw(se_lun->lun_se_dev); se_tmr->tmr_dev = rcu_dereference_raw(se_lun->lun_se_dev);
- spin_lock_irqsave(&se_tmr->tmr_dev->se_tmr_lock, flags); - list_add_tail(&se_tmr->tmr_list, &se_tmr->tmr_dev->dev_tmr_list); - spin_unlock_irqrestore(&se_tmr->tmr_dev->se_tmr_lock, flags); - return 0; } EXPORT_SYMBOL(transport_lookup_tmr_lun); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 670cfb7bd426a..73d0d6133ac8f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3629,6 +3629,10 @@ int transport_generic_handle_tmr( unsigned long flags; bool aborted = false;
+ spin_lock_irqsave(&cmd->se_dev->se_tmr_lock, flags); + list_add_tail(&cmd->se_tmr_req->tmr_list, &cmd->se_dev->dev_tmr_list); + spin_unlock_irqrestore(&cmd->se_dev->se_tmr_lock, flags); + spin_lock_irqsave(&cmd->t_state_lock, flags); if (cmd->transport_state & CMD_T_ABORTED) { aborted = true;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit 936eba9cfb5cfbf6a2c762cd163605f2b784e03e ]
open_cached_dir today selects ses->server a.k.a primary channel to send requests. When multichannel is used, the primary channel maybe down. So it does not make sense to rely only on that channel.
This fix makes this function pick a channel with the standard helper function cifs_pick_channel.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cached_dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/smb/client/cached_dir.c b/fs/smb/client/cached_dir.c index d64a306a414be..9718926205047 100644 --- a/fs/smb/client/cached_dir.c +++ b/fs/smb/client/cached_dir.c @@ -151,7 +151,7 @@ int open_cached_dir(unsigned int xid, struct cifs_tcon *tcon, return -EOPNOTSUPP;
ses = tcon->ses; - server = ses->server; + server = cifs_pick_channel(ses); cfids = tcon->cfids;
if (!server->ops->new_lease_key)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinod Koul vkoul@kernel.org
[ Upstream commit 404290240827c3bb5c4e195174a8854eef2f89ac ]
We seem to have hit warnings of 'output may be truncated' which is fixed by increasing the size of 'dev_id'
drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’: drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=] 541 | "sh-dmae%d.%d", pdev->id, id); | ^~ In function ‘sh_dmae_chan_probe’, inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9: drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647] 541 | "sh-dmae%d.%d", pdev->id, id); | ^~~~~~~~~~~~~~ drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19] drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16 540 | snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id), | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 541 | "sh-dmae%d.%d", pdev->id, id); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/sh/shdma.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/sh/shdma.h b/drivers/dma/sh/shdma.h index 9c121a4b33ad8..f97d80343aea4 100644 --- a/drivers/dma/sh/shdma.h +++ b/drivers/dma/sh/shdma.h @@ -25,7 +25,7 @@ struct sh_dmae_chan { const struct sh_dmae_slave_config *config; /* Slave DMA configuration */ int xmit_shift; /* log_2(bytes_per_xfer) */ void __iomem *base; - char dev_id[16]; /* unique name per DMAC of channel */ + char dev_id[32]; /* unique name per DMAC of channel */ int pm_error; dma_addr_t slave_addr; };
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinod Koul vkoul@kernel.org
[ Upstream commit 6386f6c995b3ab91c72cfb76e4465553c555a8da ]
We seem to have hit warnings of 'output may be truncated' which is fixed by increasing the size of 'irq_name'
drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’: drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=] 824 | sprintf(irq_name, "qdma-queue%d", i); | ^~ drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646] 824 | sprintf(irq_name, "qdma-queue%d", i); | ^~~~~~~~~~~~~~ drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20 824 | sprintf(irq_name, "qdma-queue%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/fsl-qdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c index 3a5595a1d4421..9b141369bea5d 100644 --- a/drivers/dma/fsl-qdma.c +++ b/drivers/dma/fsl-qdma.c @@ -805,7 +805,7 @@ fsl_qdma_irq_init(struct platform_device *pdev, int i; int cpu; int ret; - char irq_name[20]; + char irq_name[32];
fsl_qdma->error_irq = platform_get_irq_byname(pdev, "qdma-error");
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vinod Koul vkoul@kernel.org
[ Upstream commit cb95a4fa50bbc1262bfb7fea482388a50b12948f ]
We seem to have hit warnings of 'output may be truncated' which is fixed by increasing the size of 'name'
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c: In function ‘dw_hdma_v0_debugfs_on’: drivers/dma/dw-edma/dw-hdma-v0-debugfs.c:125:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=] 125 | snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i); | ^~
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c: In function ‘dw_hdma_v0_debugfs_on’: drivers/dma/dw-edma/dw-hdma-v0-debugfs.c:142:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=] 142 | snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i); | ^~ drivers/dma/dw-edma/dw-edma-v0-debugfs.c: In function ‘dw_edma_debugfs_regs_wr’: drivers/dma/dw-edma/dw-edma-v0-debugfs.c:193:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=] 193 | snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i); | ^~
Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 4 ++-- drivers/dma/dw-edma/dw-hdma-v0-debugfs.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/dma/dw-edma/dw-edma-v0-debugfs.c b/drivers/dma/dw-edma/dw-edma-v0-debugfs.c index 0745d9e7d259b..406f169b09a75 100644 --- a/drivers/dma/dw-edma/dw-edma-v0-debugfs.c +++ b/drivers/dma/dw-edma/dw-edma-v0-debugfs.c @@ -176,7 +176,7 @@ dw_edma_debugfs_regs_wr(struct dw_edma *dw, struct dentry *dent) }; struct dentry *regs_dent, *ch_dent; int nr_entries, i; - char name[16]; + char name[32];
regs_dent = debugfs_create_dir(WRITE_STR, dent);
@@ -239,7 +239,7 @@ static noinline_for_stack void dw_edma_debugfs_regs_rd(struct dw_edma *dw, }; struct dentry *regs_dent, *ch_dent; int nr_entries, i; - char name[16]; + char name[32];
regs_dent = debugfs_create_dir(READ_STR, dent);
diff --git a/drivers/dma/dw-edma/dw-hdma-v0-debugfs.c b/drivers/dma/dw-edma/dw-hdma-v0-debugfs.c index 520c81978b085..dcdc57fe976c1 100644 --- a/drivers/dma/dw-edma/dw-hdma-v0-debugfs.c +++ b/drivers/dma/dw-edma/dw-hdma-v0-debugfs.c @@ -116,7 +116,7 @@ static void dw_hdma_debugfs_regs_ch(struct dw_edma *dw, enum dw_edma_dir dir, static void dw_hdma_debugfs_regs_wr(struct dw_edma *dw, struct dentry *dent) { struct dentry *regs_dent, *ch_dent; - char name[16]; + char name[32]; int i;
regs_dent = debugfs_create_dir(WRITE_STR, dent); @@ -133,7 +133,7 @@ static void dw_hdma_debugfs_regs_wr(struct dw_edma *dw, struct dentry *dent) static void dw_hdma_debugfs_regs_rd(struct dw_edma *dw, struct dentry *dent) { struct dentry *regs_dent, *ch_dent; - char name[16]; + char name[32]; int i;
regs_dent = debugfs_create_dir(READ_STR, dent);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Kazior michal@plume.com
[ Upstream commit a6e4f85d3820d00694ed10f581f4c650445dbcda ]
The nl80211_dump_interface() supports resumption in case nl80211_send_iface() doesn't have the resources to complete its work.
The logic would store the progress as iteration offsets for rdev and wdev loops.
However the logic did not properly handle resumption for non-last rdev. Assuming a system with 2 rdevs, with 2 wdevs each, this could happen:
dump(cb=[0, 0]): if_start=cb[1] (=0) send rdev0.wdev0 -> ok send rdev0.wdev1 -> yield cb[1] = 1
dump(cb=[0, 1]): if_start=cb[1] (=1) send rdev0.wdev1 -> ok // since if_start=1 the rdev0.wdev0 got skipped // through if_idx < if_start send rdev1.wdev1 -> ok
The if_start needs to be reset back to 0 upon wdev loop end.
The problem is actually hard to hit on a desktop, and even on most routers. The prerequisites for this manifesting was: - more than 1 wiphy - a few handful of interfaces - dump without rdev or wdev filter
I was seeing this with 4 wiphys 9 interfaces each. It'd miss 6 interfaces from the last wiphy reported to userspace.
Signed-off-by: Michal Kazior michal@plume.com Link: https://msgid.link/20240116142340.89678-1-kazikcz@gmail.com Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/nl80211.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 1cbbb11ea5033..fbf95b7ff6b43 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4008,6 +4008,7 @@ static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback * } wiphy_unlock(&rdev->wiphy);
+ if_start = 0; wp_idx++; } out:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau nbd@nbd.name
[ Upstream commit bcbc84af1183c8cf3d1ca9b78540c2185cd85e7f ]
fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.
Signed-off-by: Felix Fietkau nbd@nbd.name Link: https://msgid.link/20240104181059.84032-1-nbd@nbd.name Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/sta_info.c | 2 ++ net/mac80211/tx.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index c33decbb97f2d..bcf3f727fc6da 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -913,6 +913,8 @@ static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU) if (ieee80211_vif_is_mesh(&sdata->vif)) mesh_accept_plinks_update(sdata);
+ ieee80211_check_fast_xmit(sta); + return 0; out_remove: if (sta->sta.valid_links) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index d7aa75b7fd917..a85918594cbe2 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3048,7 +3048,7 @@ void ieee80211_check_fast_xmit(struct sta_info *sta) sdata->vif.type == NL80211_IFTYPE_STATION) goto out;
- if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED)) + if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED) || !sta->uploaded) goto out;
if (test_sta_flag(sta, WLAN_STA_PS_STA) ||
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fullway Wang fullwaywang@outlook.com
[ Upstream commit 04e5eac8f3ab2ff52fa191c187a46d4fdbc1e288 ]
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error.
Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor.
This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8.
Signed-off-by: Fullway Wang fullwaywang@outlook.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/savage/savagefb_driver.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/video/fbdev/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c index dddd6afcb972a..ebc9aeffdde7c 100644 --- a/drivers/video/fbdev/savage/savagefb_driver.c +++ b/drivers/video/fbdev/savage/savagefb_driver.c @@ -869,6 +869,9 @@ static int savagefb_check_var(struct fb_var_screeninfo *var,
DBG("savagefb_check_var");
+ if (!var->pixclock) + return -EINVAL; + var->transp.offset = 0; var->transp.length = 0; switch (var->bits_per_pixel) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Fullway Wang fullwaywang@outlook.com
[ Upstream commit e421946be7d9bf545147bea8419ef8239cb7ca52 ]
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error.
In sisfb_check_var(), var->pixclock is used as a divisor to caculate drate before it is checked against zero. Fix this by checking it at the beginning.
This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8.
Signed-off-by: Fullway Wang fullwaywang@outlook.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/sis/sis_main.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/video/fbdev/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c index 6ad47b6b60046..431b1a138c111 100644 --- a/drivers/video/fbdev/sis/sis_main.c +++ b/drivers/video/fbdev/sis/sis_main.c @@ -1475,6 +1475,8 @@ sisfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
vtotal = var->upper_margin + var->lower_margin + var->vsync_len;
+ if (!var->pixclock) + return -EINVAL; pixclock = var->pixclock;
if((var->vmode & FB_VMODE_MASK) == FB_VMODE_NONINTERLACED) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Liming Sun limings@nvidia.com
[ Upstream commit 8cbc756b802605dee3dd40019bd75960772bacf5 ]
Starting from Linux 5.16 kernel, Tx timeout mechanism was added in the virtio_net driver which prints the "Tx timeout" warning message when a packet stays in Tx queue for too long. Below is an example of the reported message:
"[494105.316739] virtio_net virtio1 tmfifo_net0: TX timeout on queue: 0, sq: output.0, vq: 0×1, name: output.0, usecs since last trans: 3079892256".
This issue could happen when external host driver which drains the FIFO is restared, stopped or upgraded. To avoid such confusing "Tx timeout" messages, this commit adds logic to drop the outstanding Tx packet if it's not able to transmit in two seconds due to Tx FIFO full, which can be considered as congestion or out-of-resource drop.
This commit also handles the special case that the packet is half- transmitted into the Tx FIFO. In such case, the packet is discarded with remaining length stored in vring->rem_padding. So paddings with zeros can be sent out when Tx space is available to maintain the integrity of the packet format. The padded packet will be dropped on the receiving side.
Signed-off-by: Liming Sun limings@nvidia.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20240111173106.96958-1-limings@nvidia.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/mellanox/mlxbf-tmfifo.c | 67 ++++++++++++++++++++++++ 1 file changed, 67 insertions(+)
diff --git a/drivers/platform/mellanox/mlxbf-tmfifo.c b/drivers/platform/mellanox/mlxbf-tmfifo.c index 5c683b4eaf10a..f39b7b9d2bfea 100644 --- a/drivers/platform/mellanox/mlxbf-tmfifo.c +++ b/drivers/platform/mellanox/mlxbf-tmfifo.c @@ -47,6 +47,9 @@ /* Message with data needs at least two words (for header & data). */ #define MLXBF_TMFIFO_DATA_MIN_WORDS 2
+/* Tx timeout in milliseconds. */ +#define TMFIFO_TX_TIMEOUT 2000 + /* ACPI UID for BlueField-3. */ #define TMFIFO_BF3_UID 1
@@ -62,12 +65,14 @@ struct mlxbf_tmfifo; * @drop_desc: dummy desc for packet dropping * @cur_len: processed length of the current descriptor * @rem_len: remaining length of the pending packet + * @rem_padding: remaining bytes to send as paddings * @pkt_len: total length of the pending packet * @next_avail: next avail descriptor id * @num: vring size (number of descriptors) * @align: vring alignment size * @index: vring index * @vdev_id: vring virtio id (VIRTIO_ID_xxx) + * @tx_timeout: expire time of last tx packet * @fifo: pointer to the tmfifo structure */ struct mlxbf_tmfifo_vring { @@ -79,12 +84,14 @@ struct mlxbf_tmfifo_vring { struct vring_desc drop_desc; int cur_len; int rem_len; + int rem_padding; u32 pkt_len; u16 next_avail; int num; int align; int index; int vdev_id; + unsigned long tx_timeout; struct mlxbf_tmfifo *fifo; };
@@ -819,6 +826,50 @@ static bool mlxbf_tmfifo_rxtx_one_desc(struct mlxbf_tmfifo_vring *vring, return true; }
+static void mlxbf_tmfifo_check_tx_timeout(struct mlxbf_tmfifo_vring *vring) +{ + unsigned long flags; + + /* Only handle Tx timeout for network vdev. */ + if (vring->vdev_id != VIRTIO_ID_NET) + return; + + /* Initialize the timeout or return if not expired. */ + if (!vring->tx_timeout) { + /* Initialize the timeout. */ + vring->tx_timeout = jiffies + + msecs_to_jiffies(TMFIFO_TX_TIMEOUT); + return; + } else if (time_before(jiffies, vring->tx_timeout)) { + /* Return if not timeout yet. */ + return; + } + + /* + * Drop the packet after timeout. The outstanding packet is + * released and the remaining bytes will be sent with padding byte 0x00 + * as a recovery. On the peer(host) side, the padding bytes 0x00 will be + * either dropped directly, or appended into existing outstanding packet + * thus dropped as corrupted network packet. + */ + vring->rem_padding = round_up(vring->rem_len, sizeof(u64)); + mlxbf_tmfifo_release_pkt(vring); + vring->cur_len = 0; + vring->rem_len = 0; + vring->fifo->vring[0] = NULL; + + /* + * Make sure the load/store are in order before + * returning back to virtio. + */ + virtio_mb(false); + + /* Notify upper layer. */ + spin_lock_irqsave(&vring->fifo->spin_lock[0], flags); + vring_interrupt(0, vring->vq); + spin_unlock_irqrestore(&vring->fifo->spin_lock[0], flags); +} + /* Rx & Tx processing of a queue. */ static void mlxbf_tmfifo_rxtx(struct mlxbf_tmfifo_vring *vring, bool is_rx) { @@ -841,6 +892,7 @@ static void mlxbf_tmfifo_rxtx(struct mlxbf_tmfifo_vring *vring, bool is_rx) return;
do { +retry: /* Get available FIFO space. */ if (avail == 0) { if (is_rx) @@ -851,6 +903,17 @@ static void mlxbf_tmfifo_rxtx(struct mlxbf_tmfifo_vring *vring, bool is_rx) break; }
+ /* Insert paddings for discarded Tx packet. */ + if (!is_rx) { + vring->tx_timeout = 0; + while (vring->rem_padding >= sizeof(u64)) { + writeq(0, vring->fifo->tx.data); + vring->rem_padding -= sizeof(u64); + if (--avail == 0) + goto retry; + } + } + /* Console output always comes from the Tx buffer. */ if (!is_rx && devid == VIRTIO_ID_CONSOLE) { mlxbf_tmfifo_console_tx(fifo, avail); @@ -860,6 +923,10 @@ static void mlxbf_tmfifo_rxtx(struct mlxbf_tmfifo_vring *vring, bool is_rx) /* Handle one descriptor. */ more = mlxbf_tmfifo_rxtx_one_desc(vring, is_rx, &avail); } while (more); + + /* Check Tx timeout. */ + if (avail <= 0 && !is_rx) + mlxbf_tmfifo_check_tx_timeout(vring); }
/* Handle Rx or Tx queues. */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg mika.westerberg@linux.intel.com
[ Upstream commit 8afe3c7fcaf72fca1e7d3dab16a5b7f4201ece17 ]
This adds the PCI ID of the Arrow Lake and Meteor Lake-S PCH SPI serial flash controller. This one supports all the necessary commands Linux SPI-NOR stack requires.
Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Link: https://msgid.link/r/20240122120034.2664812-3-mika.westerberg@linux.intel.co... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-intel-pci.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/spi/spi-intel-pci.c b/drivers/spi/spi-intel-pci.c index b9918dcc38027..07d20ca1164c3 100644 --- a/drivers/spi/spi-intel-pci.c +++ b/drivers/spi/spi-intel-pci.c @@ -76,6 +76,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = { { PCI_VDEVICE(INTEL, 0x7a24), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x7aa4), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x7e23), (unsigned long)&cnl_info }, + { PCI_VDEVICE(INTEL, 0x7f24), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x9d24), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0x9da4), (unsigned long)&cnl_info }, { PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&cnl_info },
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Devyn Liu liudingyuan@huawei.com
[ Upstream commit de8b6e1c231a95abf95ad097b993d34b31458ec9 ]
Return IRQ_NONE from the interrupt handler when no interrupt was detected. Because an empty interrupt will cause a null pointer error:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: complete+0x54/0x100 hisi_sfc_v3xx_isr+0x2c/0x40 [spi_hisi_sfc_v3xx] __handle_irq_event_percpu+0x64/0x1e0 handle_irq_event+0x7c/0x1cc
Signed-off-by: Devyn Liu liudingyuan@huawei.com Link: https://msgid.link/r/20240123071149.917678-1-liudingyuan@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-hisi-sfc-v3xx.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/spi/spi-hisi-sfc-v3xx.c b/drivers/spi/spi-hisi-sfc-v3xx.c index 9d22018f7985f..1301d14483d48 100644 --- a/drivers/spi/spi-hisi-sfc-v3xx.c +++ b/drivers/spi/spi-hisi-sfc-v3xx.c @@ -377,6 +377,11 @@ static const struct spi_controller_mem_ops hisi_sfc_v3xx_mem_ops = { static irqreturn_t hisi_sfc_v3xx_isr(int irq, void *data) { struct hisi_sfc_v3xx_host *host = data; + u32 reg; + + reg = readl(host->regbase + HISI_SFC_V3XX_INT_STAT); + if (!reg) + return IRQ_NONE;
hisi_sfc_v3xx_disable_int(host);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian A. Ehrhardt lk@c--e.de
[ Upstream commit 13f3956eb5681a4045a8dfdef48df5dc4d9f58a6 ]
Syzkaller reports a warning in _copy_from_iter because an iov_iter is supposedly used in the wrong direction. The reason is that syzcaller managed to generate a request with a transfer direction of SG_DXFER_TO_FROM_DEV. This instructs the kernel to copy user buffers into the kernel, read into the copied buffers and then copy the data back to user space.
Thus the iovec is used in both directions.
Detect this situation in the block layer and construct a new iterator with the correct direction for the copy-in.
Reported-by: syzbot+a532b03fdfee2c137666@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/0000000000009b92c10604d7a5e9@google.com/t/ Reported-by: syzbot+63dec323ac56c28e644f@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/0000000000003faaa105f6e7c658@google.com/T/ Signed-off-by: Christian A. Ehrhardt lk@c--e.de Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20240121202634.275068-1-lk@c--e.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-map.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/block/blk-map.c b/block/blk-map.c index 8584babf3ea0c..71210cdb34426 100644 --- a/block/blk-map.c +++ b/block/blk-map.c @@ -205,12 +205,19 @@ static int bio_copy_user_iov(struct request *rq, struct rq_map_data *map_data, /* * success */ - if ((iov_iter_rw(iter) == WRITE && - (!map_data || !map_data->null_mapped)) || - (map_data && map_data->from_user)) { + if (iov_iter_rw(iter) == WRITE && + (!map_data || !map_data->null_mapped)) { ret = bio_copy_from_iter(bio, iter); if (ret) goto cleanup; + } else if (map_data && map_data->from_user) { + struct iov_iter iter2 = *iter; + + /* This is the copy-in part of SG_DXFER_TO_FROM_DEV. */ + iter2.data_source = ITER_SOURCE; + ret = bio_copy_from_iter(bio, &iter2); + if (ret) + goto cleanup; } else { if (bmd->is_our_pages) zero_fill_bio(bio);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook keescook@chromium.org
[ Upstream commit 8deb05c84b63b4fdb8549e08942867a68924a5b8 ]
Recent versions of Clang gets confused about the possible size of the "user" allocation, and CONFIG_FORTIFY_SOURCE ends up emitting a warning[1]:
repro.c:126:4: warning: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 126 | __write_overflow_field(p_size_field, size); | ^
for this memset():
int len; __le16 *user; ... len = ses->user_name ? strlen(ses->user_name) : 0; user = kmalloc(2 + (len * 2), GFP_KERNEL); ... if (len) { ... } else { memset(user, '\0', 2); }
While Clang works on this bug[2], switch to using a direct assignment, which avoids memset() entirely which both simplifies the code and silences the false positive warning. (Making "len" size_t also silences the warning, but the direct assignment seems better.)
Reported-by: Nathan Chancellor nathan@kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/1966 [1] Link: https://github.com/llvm/llvm-project/issues/77813 [2] Cc: Steve French sfrench@samba.org Cc: Paulo Alcantara pc@manguebit.com Cc: Ronnie Sahlberg ronniesahlberg@gmail.com Cc: Shyam Prasad N sprasad@microsoft.com Cc: Tom Talpey tom@talpey.com Cc: linux-cifs@vger.kernel.org Cc: llvm@lists.linux.dev Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cifsencrypt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/smb/client/cifsencrypt.c b/fs/smb/client/cifsencrypt.c index ef4c2e3c9fa61..6322f0f68a176 100644 --- a/fs/smb/client/cifsencrypt.c +++ b/fs/smb/client/cifsencrypt.c @@ -572,7 +572,7 @@ static int calc_ntlmv2_hash(struct cifs_ses *ses, char *ntlmv2_hash, len = cifs_strtoUTF16(user, ses->user_name, len, nls_cp); UniStrupr(user); } else { - memset(user, '\0', 2); + *(u16 *)user = 0; }
rc = crypto_shash_update(ses->server->secmech.hmacmd5,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit fc43a8ac396d302ced1e991e4913827cf72c8eb9 ]
cifs_pick_channel today just selects a channel based on the policy of least loaded channel. However, it does not take into account if the channel needs reconnect. As a result, we can have failures in send that can be completely avoided.
This change doesn't make a channel a candidate for this selection if it needs reconnect.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/transport.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/fs/smb/client/transport.c b/fs/smb/client/transport.c index 4f717ad7c21b4..8695c9961f5aa 100644 --- a/fs/smb/client/transport.c +++ b/fs/smb/client/transport.c @@ -1026,6 +1026,9 @@ struct TCP_Server_Info *cifs_pick_channel(struct cifs_ses *ses) if (!server || server->terminate) continue;
+ if (CIFS_CHAN_NEEDS_RECONNECT(ses, i)) + continue; + /* * strictly speaking, we should pick up req_lock to read * server->in_flight. But it shouldn't matter much here if we
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit a68106a6928e0a6680f12bcc7338c0dddcfe4d11 ]
When the network stack returns various errors, we today bubble up the error to the user (in case of soft mounts).
This change translates all network errors except -EINTR and -EAGAIN to -ECONNABORTED. A similar approach is taken when we receive network errors when reading from the socket.
The change also forces the cifsd thread to reconnect during it's next activity.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/transport.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/fs/smb/client/transport.c b/fs/smb/client/transport.c index 8695c9961f5aa..e00278fcfa4fa 100644 --- a/fs/smb/client/transport.c +++ b/fs/smb/client/transport.c @@ -400,10 +400,17 @@ __smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, server->conn_id, server->hostname); } smbd_done: - if (rc < 0 && rc != -EINTR) + /* + * there's hardly any use for the layers above to know the + * actual error code here. All they should do at this point is + * to retry the connection and hope it goes away. + */ + if (rc < 0 && rc != -EINTR && rc != -EAGAIN) { cifs_server_dbg(VFS, "Error %d sending data on socket to server\n", rc); - else if (rc > 0) + rc = -ECONNABORTED; + cifs_signal_cifsd_for_reconnect(server, false); + } else if (rc > 0) rc = 0; out: cifs_in_send_dec(server);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit 64cc377b7628b81ffdbdb1c6bacfba895dcac3f8 ]
The code to check for replay is not just -EAGAIN. In some cases, the send request or receive response may result in network errors, which we're now mapping to -ECONNABORTED.
This change introduces a helper function which checks if the error returned in one of the above two errors. And all checks for replays will now use this helper.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cached_dir.c | 1 + fs/smb/client/cifsglob.h | 7 +++++++ 2 files changed, 8 insertions(+)
diff --git a/fs/smb/client/cached_dir.c b/fs/smb/client/cached_dir.c index 9718926205047..5730c65ffb40d 100644 --- a/fs/smb/client/cached_dir.c +++ b/fs/smb/client/cached_dir.c @@ -367,6 +367,7 @@ int open_cached_dir(unsigned int xid, struct cifs_tcon *tcon, atomic_inc(&tcon->num_remote_opens); } kfree(utf16_path); + return rc; }
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index 942e6ece56b1a..f794b16095e43 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -1820,6 +1820,13 @@ static inline bool is_retryable_error(int error) return false; }
+static inline bool is_replayable_error(int error) +{ + if (error == -EAGAIN || error == -ECONNABORTED) + return true; + return false; +} +
/* cifs_get_writable_file() flags */ #define FIND_WR_ANY 0
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Conrad Kostecki conikost@gentoo.org
[ Upstream commit 0077a504e1a4468669fd2e011108db49133db56e ]
The ASM1166 SATA host controller always reports wrongly, that it has 32 ports. But in reality, it only has six ports.
This seems to be a hardware issue, as all tested ASM1166 SATA host controllers reports such high count of ports.
Example output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0xffffff3f impl SATA mode.
By adjusting the port_map, the count is limited to six ports.
New output: ahci 0000:09:00.0: AHCI 0001.0301 32 slots 32 ports 6 Gbps 0x3f impl SATA mode.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=211873 Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218346 Signed-off-by: Conrad Kostecki conikost@gentoo.org Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Niklas Cassel cassel@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/ahci.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 3a5f3255f51b3..762c5d8b7c1a1 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -663,6 +663,11 @@ MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); static void ahci_pci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == 0x1166) { + dev_info(&pdev->dev, "ASM1166 has only six ports\n"); + hpriv->saved_port_map = 0x3f; + } + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) { dev_info(&pdev->dev, "JMB361 has only one port\n"); hpriv->saved_port_map = 1;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maksim Kiselev bigunclemax@gmail.com
[ Upstream commit e169bd4fb2b36c4b2bee63c35c740c85daeb2e86 ]
Move set_capacity() outside of the section procected by (&d->lock). To avoid possible interrupt unsafe locking scenario:
CPU0 CPU1 ---- ---- [1] lock(&bdev->bd_size_lock); local_irq_disable(); [2] lock(&d->lock); [3] lock(&bdev->bd_size_lock); <Interrupt> [4] lock(&d->lock);
*** DEADLOCK ***
Where [1](&bdev->bd_size_lock) hold by zram_add()->set_capacity(). [2]lock(&d->lock) hold by aoeblk_gdalloc(). And aoeblk_gdalloc() is trying to acquire [3](&bdev->bd_size_lock) at set_capacity() call. In this situation an attempt to acquire [4]lock(&d->lock) from aoecmd_cfg_rsp() will lead to deadlock.
So the simplest solution is breaking lock dependency [2](&d->lock) -> [3](&bdev->bd_size_lock) by moving set_capacity() outside.
Signed-off-by: Maksim Kiselev bigunclemax@gmail.com Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20240124072436.3745720-2-bigunclemax@gmail.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/aoe/aoeblk.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c index cf6883756155a..37eff1c974515 100644 --- a/drivers/block/aoe/aoeblk.c +++ b/drivers/block/aoe/aoeblk.c @@ -333,6 +333,7 @@ aoeblk_gdalloc(void *vp) struct gendisk *gd; mempool_t *mp; struct blk_mq_tag_set *set; + sector_t ssize; ulong flags; int late = 0; int err; @@ -395,7 +396,7 @@ aoeblk_gdalloc(void *vp) gd->minors = AOE_PARTITIONS; gd->fops = &aoe_bdops; gd->private_data = d; - set_capacity(gd, d->ssize); + ssize = d->ssize; snprintf(gd->disk_name, sizeof gd->disk_name, "etherd/e%ld.%d", d->aoemajor, d->aoeminor);
@@ -404,6 +405,8 @@ aoeblk_gdalloc(void *vp)
spin_unlock_irqrestore(&d->lock, flags);
+ set_capacity(gd, ssize); + err = device_add_disk(NULL, gd, aoe_attr_groups); if (err) goto out_disk_cleanup;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Charles Keepax ckeepax@opensource.cirrus.com
[ Upstream commit f9f4b0c6425eb9ffd9bf62b8b8143e786b6ba695 ]
As it devm_pm_runtime_enable can fail due to memory allocations, it is best to handle the error.
Suggested-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://msgid.link/r/20240124174101.2270249-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-cs42l43.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-cs42l43.c b/drivers/spi/spi-cs42l43.c index d239fc5a49ccc..c1556b6529092 100644 --- a/drivers/spi/spi-cs42l43.c +++ b/drivers/spi/spi-cs42l43.c @@ -244,7 +244,10 @@ static int cs42l43_spi_probe(struct platform_device *pdev) priv->ctlr->use_gpio_descriptors = true; priv->ctlr->auto_runtime_pm = true;
- devm_pm_runtime_enable(priv->dev); + ret = devm_pm_runtime_enable(priv->dev); + if (ret) + return ret; + pm_runtime_idle(priv->dev);
regmap_write(priv->regmap, CS42L43_TRAN_CONFIG6, CS42L43_FIFO_SIZE - 1);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lennert Buytenhek kernel@wantstofly.org
[ Upstream commit 20730e9b277873deeb6637339edcba64468f3da3 ]
With one of the on-board ASM1061 AHCI controllers (1b21:0612) on an ASUSTeK Pro WS WRX80E-SAGE SE WIFI mainboard, a controller hang was observed that was immediately preceded by the following kernel messages:
ahci 0000:28:00.0: Using 64-bit DMA addresses ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00000 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00300 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00380 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00400 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00680 flags=0x0000] ahci 0000:28:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0035 address=0x7fffff00700 flags=0x0000]
The first message is produced by code in drivers/iommu/dma-iommu.c which is accompanied by the following comment that seems to apply:
/* * Try to use all the 32-bit PCI addresses first. The original SAC vs. * DAC reasoning loses relevance with PCIe, but enough hardware and * firmware bugs are still lurking out there that it's safest not to * venture into the 64-bit space until necessary. * * If your device goes wrong after seeing the notice then likely either * its driver is not setting DMA masks accurately, the hardware has * some inherent bug in handling >32-bit addresses, or not all the * expected address bits are wired up between the device and the IOMMU. */
Asking the ASM1061 on a discrete PCIe card to DMA from I/O virtual address 0xffffffff00000000 produces the following I/O page faults:
vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000000 flags=0x0010] vfio-pci 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0021 address=0x7ff00000500 flags=0x0010]
Note that the upper 21 bits of the logged DMA address are zero. (When asking a different PCIe device in the same PCIe slot to DMA to the same I/O virtual address, we do see all the upper 32 bits of the DMA address as 1, so this is not an issue with the chipset or IOMMU configuration on the test system.)
Also, hacking libahci to always set the upper 21 bits of all DMA addresses to 1 produces no discernible effect on the behavior of the ASM1061, and mkfs/mount/scrub/etc work as without this hack.
This all strongly suggests that the ASM1061 has a 43 bit DMA address limit, and this commit therefore adds a quirk to deal with this limit.
This issue probably applies to (some of) the other supported ASMedia parts as well, but we limit it to the PCI IDs known to refer to ASM1061 parts, as that's the only part we know for sure to be affected by this issue at this point.
Link: https://lore.kernel.org/linux-ide/ZaZ2PIpEId-rl6jv@wantstofly.org/ Signed-off-by: Lennert Buytenhek kernel@wantstofly.org [cassel: drop date from error messages in commit log] Signed-off-by: Niklas Cassel cassel@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/ahci.c | 29 +++++++++++++++++++++++------ drivers/ata/ahci.h | 1 + 2 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 762c5d8b7c1a1..d2460fa985b7e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -48,6 +48,7 @@ enum { enum board_ids { /* board IDs by feature in alphabetical order */ board_ahci, + board_ahci_43bit_dma, board_ahci_ign_iferr, board_ahci_low_power, board_ahci_no_debounce_delay, @@ -128,6 +129,13 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + [board_ahci_43bit_dma] = { + AHCI_HFLAGS (AHCI_HFLAG_43BIT_ONLY), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, [board_ahci_ign_iferr] = { AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR), .flags = AHCI_FLAG_COMMON, @@ -597,11 +605,11 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ { PCI_VDEVICE(PROMISE, 0x3781), board_ahci }, /* FastTrak TX8660 ahci-mode */
- /* Asmedia */ + /* ASMedia */ { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */ { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */ - { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ - { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci_43bit_dma }, /* ASM1061 */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci_43bit_dma }, /* ASM1061/1062 */ { PCI_VDEVICE(ASMEDIA, 0x0621), board_ahci }, /* ASM1061R */ { PCI_VDEVICE(ASMEDIA, 0x0622), board_ahci }, /* ASM1062R */ { PCI_VDEVICE(ASMEDIA, 0x0624), board_ahci }, /* ASM1062+JMB575 */ @@ -954,11 +962,20 @@ static int ahci_pci_device_resume(struct device *dev)
#endif /* CONFIG_PM */
-static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) +static int ahci_configure_dma_masks(struct pci_dev *pdev, + struct ahci_host_priv *hpriv) { - const int dma_bits = using_dac ? 64 : 32; + int dma_bits; int rc;
+ if (hpriv->cap & HOST_CAP_64) { + dma_bits = 64; + if (hpriv->flags & AHCI_HFLAG_43BIT_ONLY) + dma_bits = 43; + } else { + dma_bits = 32; + } + /* * If the device fixup already set the dma_mask to some non-standard * value, don't extend it here. This happens on STA2X11, for example. @@ -1931,7 +1948,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ahci_gtf_filter_workaround(host);
/* initialize adapter */ - rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); + rc = ahci_configure_dma_masks(pdev, hpriv); if (rc) return rc;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 4bae95b06ae3c..df8f8a1a3a34c 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -247,6 +247,7 @@ enum { AHCI_HFLAG_SUSPEND_PHYS = BIT(26), /* handle PHYs during suspend/resume */ AHCI_HFLAG_NO_SXS = BIT(28), /* SXS not supported */ + AHCI_HFLAG_43BIT_ONLY = BIT(29), /* 43bit DMA addr limit */
/* ap->flags bits */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lukas Wunner lukas@wunner.de
[ Upstream commit 8412c47d68436b9f9a260039a4a773daa6824925 ]
Since commit 26c9d152ebf3 ("dt-bindings: tpm: Consolidate TCG TIS bindings"), several issues are reported by "make dtbs_check" for ARM devicetrees:
The nodename needs to be "tpm@0" rather than "tpmdev@0" and the compatible property needs to contain the chip's name in addition to the generic "tcg,tpm_tis-spi" or "tcg,tpm-tis-i2c":
tpmdev@0: $nodename:0: 'tpmdev@0' does not match '^tpm(@[0-9a-f]+)?$' from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
tpm@2e: compatible: 'oneOf' conditional failed, one must be fixed: ['tcg,tpm-tis-i2c'] is too short from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm-tis-i2c.yaml#
Fix these schema violations.
Aspeed Facebook BMCs use an Infineon SLB9670: https://lore.kernel.org/all/ZZSmMJ%2F%2Fl972Qbxu@fedora/ https://lore.kernel.org/all/ZZT4%2Fw2eVzMhtsPx@fedora/ https://lore.kernel.org/all/ZZTS0p1hdAchIbKp@heinlein.vulture-banana.ts.net/
Aspeed Tacoma uses a Nuvoton NPCT75X per commit 39d8a73c53a2 ("ARM: dts: aspeed: tacoma: Add TPM").
phyGATE-Tauri uses an Infineon SLB9670: https://lore.kernel.org/all/ab45c82485fa272f74adf560cbb58ee60cc42689.camel@p...
A single schema violation remains in am335x-moxa-uc-2100-common.dtsi because it is unknown which chip is used on the board. The devicetree's author has been asked for clarification but has not responded so far: https://lore.kernel.org/all/20231220090910.GA32182@wunner.de/
Signed-off-by: Lukas Wunner lukas@wunner.de Reviewed-by: Patrick Williams patrick@stwcx.xyz Reviewed-by: Tao Ren rentao.bupt@gmail.com Reviewed-by: Bruno Thomsen bruno.thomsen@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts | 4 ++-- arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts | 4 ++-- arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 2 +- arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi | 4 ++-- arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi | 2 +- arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts | 2 +- arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi | 2 +- 7 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts index e899de681f475..5be0e8fd2633c 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-bletchley.dts @@ -45,8 +45,8 @@ num-chipselects = <1>; cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
- tpmdev@0 { - compatible = "tcg,tpm_tis-spi"; + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; spi-max-frequency = <33000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts index a677c827e758f..5a8169bbda879 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts @@ -80,8 +80,8 @@ gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>; num-chipselects = <1>;
- tpmdev@0 { - compatible = "tcg,tpm_tis-spi"; + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; spi-max-frequency = <33000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts index 3f6010ef2b86f..213023bc5aec4 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts @@ -456,7 +456,7 @@ status = "okay";
tpm: tpm@2e { - compatible = "tcg,tpm-tis-i2c"; + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; reg = <0x2e>; }; }; diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi index 31590d3186a2e..00e5887c926f1 100644 --- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi +++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi @@ -35,8 +35,8 @@ gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
- tpmdev@0 { - compatible = "tcg,tpm_tis-spi"; + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; spi-max-frequency = <33000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi index 44cc4ff1d0df3..d12fb44aeb140 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi @@ -116,7 +116,7 @@ tpm_tis: tpm@1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpm>; - compatible = "tcg,tpm_tis-spi"; + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; reg = <1>; spi-max-frequency = <20000000>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts index 3a723843d5626..9984b343cdf0c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-flex-concentrator.dts @@ -130,7 +130,7 @@ * TCG specification - Section 6.4.1 Clocking: * TPM shall support a SPI clock frequency range of 10-24 MHz. */ - st33htph: tpm-tis@0 { + st33htph: tpm@0 { compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; reg = <0>; spi-max-frequency = <24000000>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi index b8730aa52ce6f..a59331aa58e55 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-moxa-uc-2100-common.dtsi @@ -217,7 +217,7 @@ pinctrl-names = "default"; pinctrl-0 = <&spi1_pins>;
- tpm_spi_tis@0 { + tpm@0 { compatible = "tcg,tpm_tis-spi"; reg = <0>; spi-max-frequency = <500000>;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Roman Li Roman.Li@amd.com
[ Upstream commit 8894b9283afd35b8d22ae07a0c118eb5f7d2e78b ]
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS.
[How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api.
Signed-off-by: Roman Li Roman.Li@amd.com Tested-by: Mark Broadworth mark.broadworth@amd.com Reviewed-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c index 51467f132c260..d595030c3359e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c @@ -711,7 +711,7 @@ static inline int dm_irq_state(struct amdgpu_device *adev, { bool st; enum dc_irq_source irq_source; - + struct dc *dc = adev->dm.dc; struct amdgpu_crtc *acrtc = adev->mode_info.crtcs[crtc_id];
if (!acrtc) { @@ -729,6 +729,9 @@ static inline int dm_irq_state(struct amdgpu_device *adev,
st = (state == AMDGPU_IRQ_STATE_ENABLE);
+ if (dc && dc->caps.ips_support && dc->idle_optimizations_allowed) + dc_allow_idle_optimizations(dc, false); + dc_interrupt_set(adev->dm.dc, irq_source, st); return 0; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huang Pei huangpei@loongson.cn
[ Upstream commit abcabb9e30a1f9a69c76776f8abffc31c377b542 ]
"cpu_probe" is called both by BP and APs, but reserving exception vector (like 0x0-0x1000) called by "cpu_probe" need once and calling on APs is too late since memblock is unavailable at that time.
So, reserve exception vector ONLY by BP.
Suggested-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Huang Pei huangpei@loongson.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/kernel/traps.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 246c6a6b02614..5b778995d4483 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -2007,7 +2007,13 @@ unsigned long vi_handlers[64];
void reserve_exception_space(phys_addr_t addr, unsigned long size) { - memblock_reserve(addr, size); + /* + * reserve exception space on CPUs other than CPU0 + * is too late, since memblock is unavailable when APs + * up + */ + if (smp_processor_id() == 0) + memblock_reserve(addr, size); }
void __init *set_except_vector(int n, void *addr)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Phoenix Chen asbeltogf@gmail.com
[ Upstream commit 1abdf288b0ef5606f76b6e191fa6df05330e3d7e ]
Add touch screen info for TECLAST X16 Plus tablet.
Signed-off-by: Phoenix Chen asbeltogf@gmail.com Link: https://lore.kernel.org/r/20240126095308.5042-1-asbeltogf@gmail.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/touchscreen_dmi.c | 35 ++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 0c67337726984..7aee5e9ff2b8d 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -944,6 +944,32 @@ static const struct ts_dmi_data teclast_tbook11_data = { .properties = teclast_tbook11_props, };
+static const struct property_entry teclast_x16_plus_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 8), + PROPERTY_ENTRY_U32("touchscreen-min-y", 14), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1916), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1264), + PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"), + PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-teclast-x16-plus.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data teclast_x16_plus_data = { + .embedded_fw = { + .name = "silead/gsl3692-teclast-x16-plus.fw", + .prefix = { 0xf0, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00 }, + .length = 43560, + .sha256 = { 0x9d, 0xb0, 0x3d, 0xf1, 0x00, 0x3c, 0xb5, 0x25, + 0x62, 0x8a, 0xa0, 0x93, 0x4b, 0xe0, 0x4e, 0x75, + 0xd1, 0x27, 0xb1, 0x65, 0x3c, 0xba, 0xa5, 0x0f, + 0xcd, 0xb4, 0xbe, 0x00, 0xbb, 0xf6, 0x43, 0x29 }, + }, + .acpi_name = "MSSL1680:00", + .properties = teclast_x16_plus_props, +}; + static const struct property_entry teclast_x3_plus_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1980), PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), @@ -1612,6 +1638,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_SKU, "E5A6_A1"), }, }, + { + /* Teclast X16 Plus */ + .driver_data = (void *)&teclast_x16_plus_data, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"), + DMI_MATCH(DMI_PRODUCT_NAME, "Default string"), + DMI_MATCH(DMI_PRODUCT_SKU, "D3A5_A1"), + }, + }, { /* Teclast X3 Plus */ .driver_data = (void *)&teclast_x3_plus_data,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li libaokun1@huawei.com
[ Upstream commit 993bf0f4c393b3667830918f9247438a8f6fdb5b ]
Determine if bb_fragments is 0 instead of determining bb_free to eliminate the risk of dividing by zero when the block bitmap is corrupted.
Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20240104142040.2835097-6-libaokun1@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/mballoc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index be63744c95d3b..528d15630a94f 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -842,7 +842,7 @@ mb_update_avg_fragment_size(struct super_block *sb, struct ext4_group_info *grp) struct ext4_sb_info *sbi = EXT4_SB(sb); int new_order;
- if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || grp->bb_free == 0) + if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || grp->bb_fragments == 0) return;
new_order = mb_avg_fragment_size_order(sb,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li libaokun1@huawei.com
[ Upstream commit 4530b3660d396a646aad91a787b6ab37cf604b53 ]
Determine if the group block bitmap is corrupted before using ac_b_ex in ext4_mb_try_best_found() to avoid allocating blocks from a group with a corrupted block bitmap in the following concurrency and making the situation worse.
ext4_mb_regular_allocator ext4_lock_group(sb, group) ext4_mb_good_group // check if the group bbitmap is corrupted ext4_mb_complex_scan_group // Scan group gets ac_b_ex but doesn't use it ext4_unlock_group(sb, group) ext4_mark_group_bitmap_corrupted(group) // The block bitmap was corrupted during // the group unlock gap. ext4_mb_try_best_found ext4_lock_group(ac->ac_sb, group) ext4_mb_use_best_found mb_mark_used // Allocating blocks in block bitmap corrupted group
Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20240104142040.2835097-7-libaokun1@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/mballoc.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 528d15630a94f..1bc615d621917 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2305,6 +2305,9 @@ void ext4_mb_try_best_found(struct ext4_allocation_context *ac, return;
ext4_lock_group(ac->ac_sb, group); + if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) + goto out; + max = mb_find_extent(e4b, ex.fe_start, ex.fe_len, &ex);
if (max > 0) { @@ -2312,6 +2315,7 @@ void ext4_mb_try_best_found(struct ext4_allocation_context *ac, ext4_mb_use_best_found(ac, e4b); }
+out: ext4_unlock_group(ac->ac_sb, group); ext4_mb_unload_buddy(e4b); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li libaokun1@huawei.com
[ Upstream commit 832698373a25950942c04a512daa652c18a9b513 ]
Places the logic for checking if the group's block bitmap is corrupt under the protection of the group lock to avoid allocating blocks from the group with a corrupted block bitmap.
Signed-off-by: Baokun Li libaokun1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20240104142040.2835097-8-libaokun1@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/mballoc.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 1bc615d621917..7497a789d002e 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2342,12 +2342,10 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac, if (err) return err;
- if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) { - ext4_mb_unload_buddy(e4b); - return 0; - } - ext4_lock_group(ac->ac_sb, group); + if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) + goto out; + max = mb_find_extent(e4b, ac->ac_g_ex.fe_start, ac->ac_g_ex.fe_len, &ex); ex.fe_logical = 0xDEADFA11; /* debug value */ @@ -2380,6 +2378,7 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac, ac->ac_b_ex = ex; ext4_mb_use_best_found(ac, e4b); } +out: ext4_unlock_group(ac->ac_sb, group); ext4_mb_unload_buddy(e4b);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 180a8f12c21f41740fee09ca7f7aa98ff5bb99f8 ]
Some devices list 3 Gpio resources in the ACPI resource list for the touchscreen:
1. GpioInt resource pointing to the GPIO used for the interrupt 2. GpioIo resource pointing to the reset GPIO 3. GpioIo resource pointing to the GPIO used for the interrupt
Note how the third extra GpioIo resource really is a duplicate of the GpioInt provided info.
Ignore this extra GPIO, treating this setup the same as gpio_count == 2 && gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook Colossus W803 rugged tablet and likely also on the CyberBook_T116K.
Reported-by: Maarten van der Schrieck Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22 Suggested-by: Maarten van der Schrieck Tested-by: Maarten van der Schrieck Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/goodix.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index af32fbe57b630..b068ff8afbc9a 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -884,7 +884,8 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) } }
- if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { + /* Some devices with gpio_int_idx 0 list a third unused GPIO */ + if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) { ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_first_gpios; } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kunwu Chan chentao@kylinos.cn
[ Upstream commit 6e2276203ac9ff10fc76917ec9813c660f627369 ]
devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.
Signed-off-by: Kunwu Chan chentao@kylinos.cn Link: https://lore.kernel.org/r/20240118031929.192192-1-chentao@kylinos.cn Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/ti/edma.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c index f1f920861fa9d..5f8d2e93ff3fb 100644 --- a/drivers/dma/ti/edma.c +++ b/drivers/dma/ti/edma.c @@ -2404,6 +2404,11 @@ static int edma_probe(struct platform_device *pdev) if (irq > 0) { irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint", dev_name(dev)); + if (!irq_name) { + ret = -ENOMEM; + goto err_disable_pm; + } + ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name, ecc); if (ret) { @@ -2420,6 +2425,11 @@ static int edma_probe(struct platform_device *pdev) if (irq > 0) { irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint", dev_name(dev)); + if (!irq_name) { + ret = -ENOMEM; + goto err_disable_pm; + } + ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name, ecc); if (ret) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Venkata Prasad Potturu venkataprasad.potturu@amd.com
[ Upstream commit 6cc2aa9a75f2397d42b78d4c159bc06722183c78 ]
Add condition check for cpu dai link initialization for amplifier codec path, as same pcm id uses for both headset and speaker path for RENOIR platforms.
Signed-off-by: Venkata Prasad Potturu venkataprasad.potturu@amd.com Link: https://msgid.link/r/20240118143023.1903984-3-venkataprasad.potturu@amd.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/amd/acp/acp-mach-common.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c index 34b14f2611ba8..12ff0a558ea8f 100644 --- a/sound/soc/amd/acp/acp-mach-common.c +++ b/sound/soc/amd/acp/acp-mach-common.c @@ -1428,8 +1428,13 @@ int acp_sofdsp_dai_links_create(struct snd_soc_card *card) if (drv_data->amp_cpu_id == I2S_SP) { links[i].name = "acp-amp-codec"; links[i].id = AMP_BE_ID; - links[i].cpus = sof_sp_virtual; - links[i].num_cpus = ARRAY_SIZE(sof_sp_virtual); + if (drv_data->platform == RENOIR) { + links[i].cpus = sof_sp; + links[i].num_cpus = ARRAY_SIZE(sof_sp); + } else { + links[i].cpus = sof_sp_virtual; + links[i].num_cpus = ARRAY_SIZE(sof_sp_virtual); + } links[i].platforms = sof_component; links[i].num_platforms = ARRAY_SIZE(sof_component); links[i].dpcm_playback = 1;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
[ Upstream commit c92688cac239794e4a1d976afa5203a4d3a2ac0e ]
Continuous regulators can be configured to operate only in a certain duty cycle range (for example from 0..91%). Add a check to error out if the duty cycle translates to an unsupported (or out of range) voltage.
Suggested-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Link: https://msgid.link/r/20240113224628.377993-2-martin.blumenstingl@googlemail.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/pwm-regulator.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 2aff6db748e2c..e33d10df7a763 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -158,6 +158,9 @@ static int pwm_regulator_get_voltage(struct regulator_dev *rdev) pwm_get_state(drvdata->pwm, &pstate);
voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit); + if (voltage < min(max_uV_duty, min_uV_duty) || + voltage > max(max_uV_duty, min_uV_duty)) + return -ENOTRECOVERABLE;
/* * The dutycycle for min_uV might be greater than the one for max_uV.
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Kosina jkosina@suse.com
[ Upstream commit afa6ac2690bb9904ff883c6e942281e1032a484d ]
Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.
Reported-by: Marcus Rückert darix@opensu.se Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-logitech-hidpp.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index fd6d8f1d9b8f6..6ef0c88e3e60a 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -4610,6 +4610,8 @@ static const struct hid_device_id hidpp_devices[] = { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC088) }, { /* Logitech G Pro X Superlight Gaming Mouse over USB */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) }, + { /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
{ /* G935 Gaming Headset */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rui Salvaterra rsalvaterra@gmail.com
[ Upstream commit 3526860f26febbe46960f9b37f5dbd5ccc109ea8 ]
We have self-explanatory constants for Intel HDA devices, let's use them instead of magic numbers and code comments.
Signed-off-by: Rui Salvaterra rsalvaterra@gmail.com Reviewed-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Link: https://lore.kernel.org/r/20240122114512.55808-2-rsalvaterra@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/hda_intel.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 2276adc844784..66f013ee160d2 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1729,8 +1729,8 @@ static int default_bdl_pos_adj(struct azx *chip) /* some exceptions: Atoms seem problematic with value 1 */ if (chip->pci->vendor == PCI_VENDOR_ID_INTEL) { switch (chip->pci->device) { - case 0x0f04: /* Baytrail */ - case 0x2284: /* Braswell */ + case PCI_DEVICE_ID_INTEL_HDA_BYT: + case PCI_DEVICE_ID_INTEL_HDA_BSW: return 32; } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rui Salvaterra rsalvaterra@gmail.com
[ Upstream commit 56beedc88405fd8022edfd1c2e63d1bc6c95efcb ]
Apollo Lake seems to also suffer from IRQ timing issues. After being up for ~4 minutes, a Pentium N4200 system ends up falling back to workqueue-based IRQ handling:
[ 208.019906] snd_hda_intel 0000:00:0e.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Unfortunately, the Baytrail and Braswell workaround value of 32 samples isn't enough to fix the issue here. Default to 64 samples.
Signed-off-by: Rui Salvaterra rsalvaterra@gmail.com Reviewed-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Link: https://lore.kernel.org/r/20240122114512.55808-3-rsalvaterra@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/hda_intel.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 66f013ee160d2..1b550c42db092 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1732,6 +1732,8 @@ static int default_bdl_pos_adj(struct azx *chip) case PCI_DEVICE_ID_INTEL_HDA_BYT: case PCI_DEVICE_ID_INTEL_HDA_BSW: return 32; + case PCI_DEVICE_ID_INTEL_HDA_APL: + return 64; } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kunwu Chan chentao@kylinos.cn
[ Upstream commit b6eda11c44dc89a681e1c105f0f4660e69b1e183 ]
devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity.
[jkosina@suse.com: tweak changelog a bit] Signed-off-by: Kunwu Chan chentao@kylinos.cn Reviewed-by: Rahul Rameshbabu rrameshbabu@nvidia.com Signed-off-by: Jiri Kosina jkosina@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-nvidia-shield.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/hid/hid-nvidia-shield.c b/drivers/hid/hid-nvidia-shield.c index 82d0a77359c46..58b15750dbb0a 100644 --- a/drivers/hid/hid-nvidia-shield.c +++ b/drivers/hid/hid-nvidia-shield.c @@ -800,6 +800,8 @@ static inline int thunderstrike_led_create(struct thunderstrike *ts)
led->name = devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL, "thunderstrike%d:blue:led", ts->id); + if (!led->name) + return -ENOMEM; led->max_brightness = 1; led->flags = LED_CORE_SUSPENDRESUME | LED_RETAIN_AT_SHUTDOWN; led->brightness_get = &thunderstrike_led_get_brightness; @@ -831,6 +833,8 @@ static inline int thunderstrike_psy_create(struct shield_device *shield_dev) shield_dev->battery_dev.desc.name = devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL, "thunderstrike_%d", ts->id); + if (!shield_dev->battery_dev.desc.name) + return -ENOMEM;
shield_dev->battery_dev.psy = power_supply_register( &hdev->dev, &shield_dev->battery_dev.desc, &psy_cfg);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guixin Liu kanie@linux.alibaba.com
[ Upstream commit 47c5dd66c1840524572dcdd956f4af2bdb6fbdff ]
The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module exit.
Signed-off-by: Guixin Liu kanie@linux.alibaba.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Chaitanya Kulkarni kch@nvidia.com Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/tcp.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index 80db64a4b09f6..bb42ae42b1c6e 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -2204,6 +2204,7 @@ static void __exit nvmet_tcp_exit(void) flush_workqueue(nvmet_wq);
destroy_workqueue(nvmet_tcp_wq); + ida_destroy(&nvmet_tcp_queue_ida); }
module_init(nvmet_tcp_init);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian A. Ehrhardt lk@c--e.de
[ Upstream commit f3be347ea42dbb0358cd8b2d8dc543a23b70a976 ]
The PPM on some Dell laptops seems to expect that the ACK_CC_CI command to clear the connector change notification is in turn followed by another ACK_CC_CI to acknowledge the ACK_CC_CI command itself. This is in violation of the UCSI spec that states:
"The only notification that is not acknowledged by the OPM is the command completion notification for the ACK_CC_CI or the PPM_RESET command."
Add a quirk to send this ack anyway. Apply the quirk to all Dell systems.
On the first command that acks a connector change send a dummy command to determine if it runs into a timeout. Only activate the quirk if it does. This ensure that we do not break Dell systems that do not need the quirk.
Signed-off-by: "Christian A. Ehrhardt" lk@c--e.de Reviewed-by: Heikki Krogerus heikki.krogerus@linux.intel.com Link: https://lore.kernel.org/r/20240121204123.275441-4-lk@c--e.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/typec/ucsi/ucsi_acpi.c | 71 ++++++++++++++++++++++++++++-- 1 file changed, 68 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c index fa222080887d5..928eacbeb21ac 100644 --- a/drivers/usb/typec/ucsi/ucsi_acpi.c +++ b/drivers/usb/typec/ucsi/ucsi_acpi.c @@ -25,6 +25,8 @@ struct ucsi_acpi { unsigned long flags; guid_t guid; u64 cmd; + bool dell_quirk_probed; + bool dell_quirk_active; };
static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func) @@ -126,12 +128,73 @@ static const struct ucsi_operations ucsi_zenbook_ops = { .async_write = ucsi_acpi_async_write };
-static const struct dmi_system_id zenbook_dmi_id[] = { +/* + * Some Dell laptops expect that an ACK command with the + * UCSI_ACK_CONNECTOR_CHANGE bit set is followed by a (separate) + * ACK command that only has the UCSI_ACK_COMMAND_COMPLETE bit set. + * If this is not done events are not delivered to OSPM and + * subsequent commands will timeout. + */ +static int +ucsi_dell_sync_write(struct ucsi *ucsi, unsigned int offset, + const void *val, size_t val_len) +{ + struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi); + u64 cmd = *(u64 *)val, ack = 0; + int ret; + + if (UCSI_COMMAND(cmd) == UCSI_ACK_CC_CI && + cmd & UCSI_ACK_CONNECTOR_CHANGE) + ack = UCSI_ACK_CC_CI | UCSI_ACK_COMMAND_COMPLETE; + + ret = ucsi_acpi_sync_write(ucsi, offset, val, val_len); + if (ret != 0) + return ret; + if (ack == 0) + return ret; + + if (!ua->dell_quirk_probed) { + ua->dell_quirk_probed = true; + + cmd = UCSI_GET_CAPABILITY; + ret = ucsi_acpi_sync_write(ucsi, UCSI_CONTROL, &cmd, + sizeof(cmd)); + if (ret == 0) + return ucsi_acpi_sync_write(ucsi, UCSI_CONTROL, + &ack, sizeof(ack)); + if (ret != -ETIMEDOUT) + return ret; + + ua->dell_quirk_active = true; + dev_err(ua->dev, "Firmware bug: Additional ACK required after ACKing a connector change.\n"); + dev_err(ua->dev, "Firmware bug: Enabling workaround\n"); + } + + if (!ua->dell_quirk_active) + return ret; + + return ucsi_acpi_sync_write(ucsi, UCSI_CONTROL, &ack, sizeof(ack)); +} + +static const struct ucsi_operations ucsi_dell_ops = { + .read = ucsi_acpi_read, + .sync_write = ucsi_dell_sync_write, + .async_write = ucsi_acpi_async_write +}; + +static const struct dmi_system_id ucsi_acpi_quirks[] = { { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"), }, + .driver_data = (void *)&ucsi_zenbook_ops, + }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + }, + .driver_data = (void *)&ucsi_dell_ops, }, { } }; @@ -160,6 +223,7 @@ static int ucsi_acpi_probe(struct platform_device *pdev) { struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); const struct ucsi_operations *ops = &ucsi_acpi_ops; + const struct dmi_system_id *id; struct ucsi_acpi *ua; struct resource *res; acpi_status status; @@ -189,8 +253,9 @@ static int ucsi_acpi_probe(struct platform_device *pdev) init_completion(&ua->complete); ua->dev = &pdev->dev;
- if (dmi_check_system(zenbook_dmi_id)) - ops = &ucsi_zenbook_ops; + id = dmi_first_match(ucsi_acpi_quirks); + if (id) + ops = id->driver_data;
ua->ucsi = ucsi_create(&pdev->dev, ops); if (IS_ERR(ua->ucsi))
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Tsoy alexander@tsoy.me
[ Upstream commit 346f59d1e8ed0eed41c80e1acb657e484c308e6a ]
Many devices with a single alternate setting do not have a Valid Alternate Setting Control and validation performed by validate_sample_rate_table_v2v3() doesn't work on them and is not really needed. So check the presense of control before sending altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It takes up to 40 seconds to bootup due to how slow it switches sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60 [ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2659.164829] usb 3-2: Product: MicroBook IIc [ 2659.164830] usb 3-2: Manufacturer: MOTU [ 2659.166204] usb 3-2: Found last interface = 3 [ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug [ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3 [ 2679.322321] usb 3-2: Creating new data endpoint #3 [ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1 [ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110 [ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug [ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84 [ 2694.444721] usb 3-2: Creating new data endpoint #84 [ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy alexander@tsoy.me Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/format.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)
diff --git a/sound/usb/format.c b/sound/usb/format.c index ab5fed9f55b60..3b45d0ee76938 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -470,9 +470,11 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip, int clock) { struct usb_device *dev = chip->dev; + struct usb_host_interface *alts; unsigned int *table; unsigned int nr_rates; int i, err; + u32 bmControls;
/* performing the rate verification may lead to unexpected USB bus * behavior afterwards by some unknown reason. Do this only for the @@ -481,6 +483,24 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip, if (!(chip->quirk_flags & QUIRK_FLAG_VALIDATE_RATES)) return 0; /* don't perform the validation as default */
+ alts = snd_usb_get_host_interface(chip, fp->iface, fp->altsetting); + if (!alts) + return 0; + + if (fp->protocol == UAC_VERSION_3) { + struct uac3_as_header_descriptor *as = snd_usb_find_csint_desc( + alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); + bmControls = le32_to_cpu(as->bmControls); + } else { + struct uac2_as_header_descriptor *as = snd_usb_find_csint_desc( + alts->extra, alts->extralen, NULL, UAC_AS_GENERAL); + bmControls = as->bmControls; + } + + if (!uac_v2v3_control_is_readable(bmControls, + UAC2_AS_VAL_ALT_SETTINGS)) + return 0; + table = kcalloc(fp->nr_rates, sizeof(*table), GFP_KERNEL); if (!table) return -ENOMEM;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen-Yu Tsai wens@csie.org
[ Upstream commit 0adf963b8463faa44653e22e56ce55f747e68868 ]
The SPDIF hardware block found in the H616 SoC has the same layout as the one found in the H6 SoC, except that it is missing the receiver side.
Since the driver currently only supports the transmit function, support for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai wens@csie.org Reviewed-by: Andre Przywara andre.przywara@arm.com Reviewed-by: Jernej Skrabec jernej.skrabec@gmail.com Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sunxi/sun4i-spdif.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c index 702386823d172..f41c309558579 100644 --- a/sound/soc/sunxi/sun4i-spdif.c +++ b/sound/soc/sunxi/sun4i-spdif.c @@ -577,6 +577,11 @@ static const struct of_device_id sun4i_spdif_of_match[] = { .compatible = "allwinner,sun50i-h6-spdif", .data = &sun50i_h6_spdif_quirks, }, + { + .compatible = "allwinner,sun50i-h616-spdif", + /* Essentially the same as the H6, but without RX */ + .data = &sun50i_h6_spdif_quirks, + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kenzo Gomez kenzo.sgomez@gmail.com
[ Upstream commit c16dfab33f99fc3ff43d48253bc2784ccb84c1de ]
Add new model entry into configuration table.
Signed-off-by: Kenzo Gomez kenzo.sgomez@gmail.com Link: https://lore.kernel.org/r/20240127164621.26431-1-kenzo.sgomez@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/cs35l41_hda_property.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c index 35277ce890a46..59504852adc69 100644 --- a/sound/pci/hda/cs35l41_hda_property.c +++ b/sound/pci/hda/cs35l41_hda_property.c @@ -76,6 +76,7 @@ static const struct cs35l41_config cs35l41_config_table[] = { { "10431533", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, { "10431573", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 }, { "10431663", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 }, + { "104316A3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, { "104316D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, { "104316F3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, { "104317F3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, @@ -410,6 +411,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = { { "CSC3551", "10431533", generic_dsd_config }, { "CSC3551", "10431573", generic_dsd_config }, { "CSC3551", "10431663", generic_dsd_config }, + { "CSC3551", "104316A3", generic_dsd_config }, { "CSC3551", "104316D3", generic_dsd_config }, { "CSC3551", "104316F3", generic_dsd_config }, { "CSC3551", "104317F3", generic_dsd_config },
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chhayly Leang clw.leang@gmail.com
[ Upstream commit be220d2e5544ff094142d263db5cf94d034b5e39 ]
Adds sound support for ASUS Zenbook UM3402YAR with missing DSD
Signed-off-by: Chhayly Leang clw.leang@gmail.com Link: https://lore.kernel.org/r/20240126080912.87422-1-clw.leang@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/cs35l41_hda_property.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c index 59504852adc69..d74cf11eef1ea 100644 --- a/sound/pci/hda/cs35l41_hda_property.c +++ b/sound/pci/hda/cs35l41_hda_property.c @@ -76,6 +76,7 @@ static const struct cs35l41_config cs35l41_config_table[] = { { "10431533", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 }, { "10431573", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 }, { "10431663", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 }, + { "10431683", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 }, { "104316A3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, { "104316D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, { "104316F3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 }, @@ -411,6 +412,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = { { "CSC3551", "10431533", generic_dsd_config }, { "CSC3551", "10431573", generic_dsd_config }, { "CSC3551", "10431663", generic_dsd_config }, + { "CSC3551", "10431683", generic_dsd_config }, { "CSC3551", "104316A3", generic_dsd_config }, { "CSC3551", "104316D3", generic_dsd_config }, { "CSC3551", "104316F3", generic_dsd_config },
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrick Rudolph patrick.rudolph@9elements.com
[ Upstream commit a3fa9838e8140584a6f338e8516f2b05d3bea812 ]
The max5970 datasheet gives the impression that IRQ status bits must be cleared by writing a one to set bits, as those are marked with 'R/C', however tests showed that a zero must be written.
Fixes an IRQ storm as the interrupt handler actually clears the IRQ status bits.
Signed-off-by: Patrick Rudolph patrick.rudolph@9elements.com Signed-off-by: Naresh Solanki naresh.solanki@9elements.com Link: https://msgid.link/r/20240130150257.3643657-1-naresh.solanki@9elements.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/max5970-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c index bc88a40a88d4c..830a1c4cd7057 100644 --- a/drivers/regulator/max5970-regulator.c +++ b/drivers/regulator/max5970-regulator.c @@ -392,7 +392,7 @@ static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg, return ret;
if (*val) - return regmap_write(map, reg, *val); + return regmap_write(map, reg, 0);
return 0; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wolfram Sang wsa+renesas@sang-engineering.com
[ Upstream commit 6500ad28fd5d67d5ca0fee9da73c463090842440 ]
cppcheck rightfully warned:
drivers/spi/spi-sh-msiof.c:792:28: warning: Signed integer overflow for expression '7<<29'. [integerOverflow] sh_msiof_write(p, SIFCTR, SIFCTR_TFWM_1 | SIFCTR_RFWM_1);
Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://msgid.link/r/20240130094053.10672-1-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-sh-msiof.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index cfc3b1ddbd229..6f12e4fb2e2e1 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -136,14 +136,14 @@ struct sh_msiof_spi_priv {
/* SIFCTR */ #define SIFCTR_TFWM_MASK GENMASK(31, 29) /* Transmit FIFO Watermark */ -#define SIFCTR_TFWM_64 (0 << 29) /* Transfer Request when 64 empty stages */ -#define SIFCTR_TFWM_32 (1 << 29) /* Transfer Request when 32 empty stages */ -#define SIFCTR_TFWM_24 (2 << 29) /* Transfer Request when 24 empty stages */ -#define SIFCTR_TFWM_16 (3 << 29) /* Transfer Request when 16 empty stages */ -#define SIFCTR_TFWM_12 (4 << 29) /* Transfer Request when 12 empty stages */ -#define SIFCTR_TFWM_8 (5 << 29) /* Transfer Request when 8 empty stages */ -#define SIFCTR_TFWM_4 (6 << 29) /* Transfer Request when 4 empty stages */ -#define SIFCTR_TFWM_1 (7 << 29) /* Transfer Request when 1 empty stage */ +#define SIFCTR_TFWM_64 (0UL << 29) /* Transfer Request when 64 empty stages */ +#define SIFCTR_TFWM_32 (1UL << 29) /* Transfer Request when 32 empty stages */ +#define SIFCTR_TFWM_24 (2UL << 29) /* Transfer Request when 24 empty stages */ +#define SIFCTR_TFWM_16 (3UL << 29) /* Transfer Request when 16 empty stages */ +#define SIFCTR_TFWM_12 (4UL << 29) /* Transfer Request when 12 empty stages */ +#define SIFCTR_TFWM_8 (5UL << 29) /* Transfer Request when 8 empty stages */ +#define SIFCTR_TFWM_4 (6UL << 29) /* Transfer Request when 4 empty stages */ +#define SIFCTR_TFWM_1 (7UL << 29) /* Transfer Request when 1 empty stage */ #define SIFCTR_TFUA_MASK GENMASK(26, 20) /* Transmit FIFO Usable Area */ #define SIFCTR_TFUA_SHIFT 20 #define SIFCTR_TFUA(i) ((i) << SIFCTR_TFUA_SHIFT)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Brenton Simpson appsforartists@google.com
[ Upstream commit 80441f76ee67002437db61f3b317ed80cce085d2 ]
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck. It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad, volume buttons, a power button, and 2 LED ring lights.
The Legion Go firmware presents these controls as a USB hub with various devices attached. In its default state, the gamepad is presented as an Xbox controller connected to this hub. (By holding a combination of buttons, it can be changed to use the older DirectInput API.)
This patch teaches the existing Xbox controller module `xpad` to bind to the controller in the Legion Go, which enables support for the:
- directional pad, - analog sticks (including clicks), - X, Y, A, B, - start and select (or menu and capture), - shoulder buttons, and - rumble.
The trackpad, touchscreen, volume controls, and power button are already supported via existing kernel modules. Two of the face buttons, the gyroscopes, rear paddles, and LEDs are not.
After this patch lands, the Legion Go will be mostly functional in Linux, out-of-the-box. The various components of the USB hub can be synthesized into a single logical controller (including the additional buttons) in userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which makes the Go fully functional.
Signed-off-by: Brenton Simpson appsforartists@google.com Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/joystick/xpad.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index e2c1848182de9..d0bb3edfd0a09 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -294,6 +294,7 @@ static const struct xpad_device { { 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 }, { 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 }, { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, + { 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 }, { 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 }, { 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, @@ -491,6 +492,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x15e4), /* Numark Xbox 360 controllers */ XPAD_XBOX360_VENDOR(0x162e), /* Joytech Xbox 360 controllers */ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */ + XPAD_XBOX360_VENDOR(0x17ef), /* Lenovo */ XPAD_XBOX360_VENDOR(0x1949), /* Amazon controllers */ XPAD_XBOX360_VENDOR(0x1bad), /* Harmonix Rock Band guitar and drums */ XPAD_XBOX360_VENDOR(0x20d6), /* PowerA controllers */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Will Deacon will@kernel.org
[ Upstream commit ac9762a74c7ca7cbfcb4c65f5871373653a046ac ]
When probing the open-dice driver with PROVE_LOCKING=y, lockdep complains that the mutex in 'drvdata->lock' has a non-static key:
| INFO: trying to register non-static key. | The code is fine but needs lockdep annotation, or maybe | you didn't initialize this object before use? | turning off the locking correctness validator.
Fix the problem by initialising the mutex memory with mutex_init() instead of __MUTEX_INITIALIZER().
Cc: Arnd Bergmann arnd@arndb.de Cc: David Brazdil dbrazdil@google.com Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Will Deacon will@kernel.org Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/open-dice.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/misc/open-dice.c b/drivers/misc/open-dice.c index 8aea2d070a40c..d279a4f195e2a 100644 --- a/drivers/misc/open-dice.c +++ b/drivers/misc/open-dice.c @@ -140,7 +140,6 @@ static int __init open_dice_probe(struct platform_device *pdev) return -ENOMEM;
*drvdata = (struct open_dice_drvdata){ - .lock = __MUTEX_INITIALIZER(drvdata->lock), .rmem = rmem, .misc = (struct miscdevice){ .parent = dev, @@ -150,6 +149,7 @@ static int __init open_dice_probe(struct platform_device *pdev) .mode = 0600, }, }; + mutex_init(&drvdata->lock);
/* Index overflow check not needed, misc_register() will fail. */ snprintf(drvdata->name, sizeof(drvdata->name), DRIVER_NAME"%u", dev_idx++);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long lucien.xin@gmail.com
[ Upstream commit 6e348067ee4bc5905e35faa3a8fafa91c9124bc7 ]
The annotation says in sctp_new(): "If it is a shutdown ack OOTB packet, we expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8)". However, it does not check SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY] in the conntrack entry(ct).
Because of that, if the ct in Router disappears for some reason in [1] with the packet sequence like below:
Client > Server: sctp (1) [INIT] [init tag: 3201533963] Server > Client: sctp (1) [INIT ACK] [init tag: 972498433] Client > Server: sctp (1) [COOKIE ECHO] Server > Client: sctp (1) [COOKIE ACK] Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057809] Server > Client: sctp (1) [SACK] [cum ack 3075057809] Server > Client: sctp (1) [HB REQ] (the ct in Router disappears somehow) <-------- [1] Client > Server: sctp (1) [HB ACK] Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810] Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810] Client > Server: sctp (1) [HB REQ] Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810] Client > Server: sctp (1) [HB REQ] Client > Server: sctp (1) [ABORT]
when processing HB ACK packet in Router it calls sctp_new() to initialize the new ct with vtag[REPLY] set to HB_ACK packet's vtag.
Later when sending DATA from Client, all the SACKs from Server will get dropped in Router, as the SACK packet's vtag does not match vtag[REPLY] in the ct. The worst thing is the vtag in this ct will never get fixed by the upcoming packets from Server.
This patch fixes it by checking SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY] in the ct in sctp_new() as the annotation says. With this fix, it will leave vtag[REPLY] in ct to 0 in the case above, and the next HB REQ/ACK from Server is able to fix the vtag as its value is 0 in nf_conntrack_sctp_packet().
Signed-off-by: Xin Long lucien.xin@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_proto_sctp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c index c6bd533983c1f..4cc97f971264e 100644 --- a/net/netfilter/nf_conntrack_proto_sctp.c +++ b/net/netfilter/nf_conntrack_proto_sctp.c @@ -283,7 +283,7 @@ sctp_new(struct nf_conn *ct, const struct sk_buff *skb, pr_debug("Setting vtag %x for secondary conntrack\n", sh->vtag); ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] = sh->vtag; - } else { + } else if (sch->type == SCTP_CID_SHUTDOWN_ACK) { /* If it is a shutdown ack OOTB packet, we expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */ pr_debug("Setting vtag %x for new conn OOTB\n",
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mukul Joshi mukul.joshi@amd.com
[ Upstream commit 4119734e06a7f30e7e8eb666692a58b85dca0269 ]
On GFX 9.4.3, for a given KFD node, fetch the correct drm device from XCP manager when checking for cgroup permissions.
Signed-off-by: Mukul Joshi mukul.joshi@amd.com Reviewed-by: Harish Kasiviswanathan Harish.Kasiviswanathan@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index 28162bfbe1b33..71445ab63b5e5 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -1482,10 +1482,15 @@ void kfd_dec_compute_active(struct kfd_node *dev);
/* Cgroup Support */ /* Check with device cgroup if @kfd device is accessible */ -static inline int kfd_devcgroup_check_permission(struct kfd_node *kfd) +static inline int kfd_devcgroup_check_permission(struct kfd_node *node) { #if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF) - struct drm_device *ddev = adev_to_drm(kfd->adev); + struct drm_device *ddev; + + if (node->xcp) + ddev = node->xcp->ddev; + else + ddev = adev_to_drm(node->adev);
return devcgroup_check_permission(DEVCG_DEV_CHAR, DRM_MAJOR, ddev->render->index,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sohaib Nadeem sohaib.nadeem@amd.com
[ Upstream commit 2ff33c759a4247c84ec0b7815f1f223e155ba82a ]
[why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs).
[how] Increasing DCFCLK by raising the min_dcfclk_mhz
Reviewed-by: Chaitanya Dhere chaitanya.dhere@amd.com Reviewed-by: Alvin Lee alvin.lee2@amd.com Acked-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Sohaib Nadeem sohaib.nadeem@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index fe2b67d745f0d..3386eb4150fc6 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -2719,7 +2719,7 @@ static int build_synthetic_soc_states(bool disable_dc_mode_overwrite, struct clk struct _vcs_dpi_voltage_scaling_st entry = {0}; struct clk_limit_table_entry max_clk_data = {0};
- unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299; + unsigned int min_dcfclk_mhz = 399, min_fclk_mhz = 599;
static const unsigned int num_dcfclk_stas = 5; unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564};
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Charlene Liu charlene.liu@amd.com
[ Upstream commit b5abd7f983e14054593dc91d6df2aa5f8cc67652 ]
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index.
[how] Move them to follow the original order.
Reviewed-by: Muhammad Ahmed ahmed.ahmed@amd.com Acked-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Charlene Liu charlene.liu@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 4 ++-- drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c index 501388014855c..d761b0df28784 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c @@ -203,12 +203,12 @@ void dcn32_link_encoder_construct( enc10->base.hpd_source = init_data->hpd_source; enc10->base.connector = init_data->connector;
- if (enc10->base.connector.id == CONNECTOR_ID_USBC) - enc10->base.features.flags.bits.DP_IS_USB_C = 1;
enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
enc10->base.features = *enc_features; + if (enc10->base.connector.id == CONNECTOR_ID_USBC) + enc10->base.features.flags.bits.DP_IS_USB_C = 1;
enc10->base.transmitter = init_data->transmitter;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c index da94e5309fbaf..81e349d5835bb 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c @@ -184,8 +184,6 @@ void dcn35_link_encoder_construct( enc10->base.hpd_source = init_data->hpd_source; enc10->base.connector = init_data->connector;
- if (enc10->base.connector.id == CONNECTOR_ID_USBC) - enc10->base.features.flags.bits.DP_IS_USB_C = 1;
enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
@@ -240,6 +238,8 @@ void dcn35_link_encoder_construct( }
enc10->base.features.flags.bits.HDMI_6GB_EN = 1; + if (enc10->base.connector.id == CONNECTOR_ID_USBC) + enc10->base.features.flags.bits.DP_IS_USB_C = 1;
if (bp_funcs->get_connector_speed_cap_info) result = bp_funcs->get_connector_speed_cap_info(enc10->base.ctx->dc_bios,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dmytro Laktyushkin dmytro.laktyushkin@amd.com
[ Upstream commit 31c2bf25eaf51c2d45f092284a28e97f43b54c15 ]
[Why] Secondary DP2 display fails to light up in some instances
[How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case
Reviewed-by: Charlene Liu charlene.liu@amd.com Reviewed-by: Dmytro Laktyushkin dmytro.laktyushkin@amd.com Acked-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Daniel Miess daniel.miess@amd.com Signed-off-by: Dmytro Laktyushkin dmytro.laktyushkin@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 2 +- .../gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 11 +++++------ 2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c index 9fedf99475695..c1f1665e553d6 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c @@ -1182,9 +1182,9 @@ void dce110_disable_stream(struct pipe_ctx *pipe_ctx) dto_params.timing = &pipe_ctx->stream->timing; dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst; if (dccg) { - dccg->funcs->set_dtbclk_dto(dccg, &dto_params); dccg->funcs->disable_symclk32_se(dccg, dp_hpo_inst); dccg->funcs->set_dpstreamclk(dccg, REFCLK, tg->inst, dp_hpo_inst); + dccg->funcs->set_dtbclk_dto(dccg, &dto_params); } } else if (dccg && dccg->funcs->disable_symclk_se) { dccg->funcs->disable_symclk_se(dccg, stream_enc->stream_enc_inst, diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c index da0181fef411f..c966f38583cb9 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c @@ -2776,18 +2776,17 @@ void dcn20_enable_stream(struct pipe_ctx *pipe_ctx) }
if (dc->link_srv->dp_is_128b_132b_signal(pipe_ctx)) { - dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst; - dccg->funcs->set_dpstreamclk(dccg, DTBCLK0, tg->inst, dp_hpo_inst); - - phyd32clk = get_phyd32clk_src(link); - dccg->funcs->enable_symclk32_se(dccg, dp_hpo_inst, phyd32clk); - dto_params.otg_inst = tg->inst; dto_params.pixclk_khz = pipe_ctx->stream->timing.pix_clk_100hz / 10; dto_params.num_odm_segments = get_odm_segment_count(pipe_ctx); dto_params.timing = &pipe_ctx->stream->timing; dto_params.ref_dtbclk_khz = dc->clk_mgr->funcs->get_dtb_ref_clk_frequency(dc->clk_mgr); dccg->funcs->set_dtbclk_dto(dccg, &dto_params); + dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst; + dccg->funcs->set_dpstreamclk(dccg, DTBCLK0, tg->inst, dp_hpo_inst); + + phyd32clk = get_phyd32clk_src(link); + dccg->funcs->enable_symclk32_se(dccg, dp_hpo_inst, phyd32clk); } else { if (dccg->funcs->enable_symclk_se) dccg->funcs->enable_symclk_se(dccg, stream_enc->stream_enc_inst,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit ee36a3b345c433a846effcdcfba437c2298eeda5 ]
Following a successful cifs_tree_connect, we have the code to scale up/down the number of channels in the session. However, it is not protected by a lock today.
As a result, this code can be executed by several processes that select the same channel. The core functions handle this well, as they pick chan_lock. However, we've seen cases where smb2_reconnect throws some warnings.
To fix that, this change introduces a flags bitmap inside the cifs_ses structure. A new flag type is used to ensure that only one process enters this section at any time.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cifsglob.h | 3 +++ fs/smb/client/smb2pdu.c | 18 +++++++++++++++++- 2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index f794b16095e43..dcc41fe33b705 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -1018,6 +1018,8 @@ struct cifs_chan { __u8 signkey[SMB3_SIGN_KEY_SIZE]; };
+#define CIFS_SES_FLAG_SCALE_CHANNELS (0x1) + /* * Session structure. One of these for each uid session with a particular host */ @@ -1050,6 +1052,7 @@ struct cifs_ses { enum securityEnum sectype; /* what security flavor was specified? */ bool sign; /* is signing required? */ bool domainAuto:1; + unsigned int flags; __u16 session_flags; __u8 smb3signingkey[SMB3_SIGN_KEY_SIZE]; __u8 smb3encryptionkey[SMB3_ENC_DEC_KEY_SIZE]; diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index 5d9c87d2e1e01..ce2d28537bc8a 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -399,6 +399,15 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon, goto out; }
+ spin_lock(&ses->ses_lock); + if (ses->flags & CIFS_SES_FLAG_SCALE_CHANNELS) { + spin_unlock(&ses->ses_lock); + mutex_unlock(&ses->session_mutex); + goto skip_add_channels; + } + ses->flags |= CIFS_SES_FLAG_SCALE_CHANNELS; + spin_unlock(&ses->ses_lock); + if (!rc && (server->capabilities & SMB2_GLOBAL_CAP_MULTI_CHANNEL)) { mutex_unlock(&ses->session_mutex); @@ -428,15 +437,22 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon, if (ses->chan_max > ses->chan_count && ses->iface_count && !SERVER_IS_CHAN(server)) { - if (ses->chan_count == 1) + if (ses->chan_count == 1) { cifs_server_dbg(VFS, "supports multichannel now\n"); + queue_delayed_work(cifsiod_wq, &tcon->query_interfaces, + (SMB_INTERFACE_POLL_INTERVAL * HZ)); + }
cifs_try_adding_channels(ses); } } else { mutex_unlock(&ses->session_mutex); } + skip_add_channels: + spin_lock(&ses->ses_lock); + ses->flags &= ~CIFS_SES_FLAG_SCALE_CHANNELS; + spin_unlock(&ses->ses_lock);
if (smb2_command != SMB2_INTERNAL_CMD) mod_delayed_work(cifsiod_wq, &server->reconnect, 0);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit daf3f0f99cde93a066240462b7a87cdfeedc04c0 ]
There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part name. It is trivial to select either fwf_name or cs_dsp.part as the string to use when building the filename in wm_adsp_request_firmware_file().
This leaves fwf_name entirely owned by the codec driver.
It also avoids problems with freeing the pointer. With the original code fwf_name was either a pointer owned by the codec driver, or a kstrdup() created by wm_adsp. This meant wm_adsp must free it if it set it, but not if the codec driver set it. The code was handling this by using devm_kstrdup(). But there is no absolute requirement that wm_adsp_common_init() must be called from probe(), so this was a pseudo-memory leak - each new call to wm_adsp_common_init() would allocate another block of memory but these would only be freed if the owning codec driver was removed.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Link: https://msgid.link/r/20240129162737.497-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm_adsp.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index c01e31175015c..9c0accf5e1888 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -739,19 +739,25 @@ static int wm_adsp_request_firmware_file(struct wm_adsp *dsp, const char *filetype) { struct cs_dsp *cs_dsp = &dsp->cs_dsp; + const char *fwf; char *s, c; int ret = 0;
+ if (dsp->fwf_name) + fwf = dsp->fwf_name; + else + fwf = dsp->cs_dsp.name; + if (system_name && asoc_component_prefix) *filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s-%s-%s.%s", dir, dsp->part, - dsp->fwf_name, wm_adsp_fw[dsp->fw].file, system_name, + fwf, wm_adsp_fw[dsp->fw].file, system_name, asoc_component_prefix, filetype); else if (system_name) *filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s-%s.%s", dir, dsp->part, - dsp->fwf_name, wm_adsp_fw[dsp->fw].file, system_name, + fwf, wm_adsp_fw[dsp->fw].file, system_name, filetype); else - *filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s.%s", dir, dsp->part, dsp->fwf_name, + *filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s.%s", dir, dsp->part, fwf, wm_adsp_fw[dsp->fw].file, filetype);
if (*filename == NULL) @@ -863,29 +869,18 @@ static int wm_adsp_request_firmware_files(struct wm_adsp *dsp, }
adsp_err(dsp, "Failed to request firmware <%s>%s-%s-%s<-%s<%s>>.wmfw\n", - cirrus_dir, dsp->part, dsp->fwf_name, wm_adsp_fw[dsp->fw].file, - system_name, asoc_component_prefix); + cirrus_dir, dsp->part, + dsp->fwf_name ? dsp->fwf_name : dsp->cs_dsp.name, + wm_adsp_fw[dsp->fw].file, system_name, asoc_component_prefix);
return -ENOENT; }
static int wm_adsp_common_init(struct wm_adsp *dsp) { - char *p; - INIT_LIST_HEAD(&dsp->compr_list); INIT_LIST_HEAD(&dsp->buffer_list);
- if (!dsp->fwf_name) { - p = devm_kstrdup(dsp->cs_dsp.dev, dsp->cs_dsp.name, GFP_KERNEL); - if (!p) - return -ENOMEM; - - dsp->fwf_name = p; - for (; *p != 0; ++p) - *p = tolower(*p); - } - return 0; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Tsoy alexander@tsoy.me
[ Upstream commit eaa1b01fe709d6a236a9cec74813e0400601fd23 ]
For devices with multiple clock sources connected to a selector, we need to check what a clock selector control request has returned. This is needed to ensure that a requested clock source is indeed selected and for autoclock feature to work.
For devices with single clock source connected, if we get an error there is nothing else we can do about it. We can't skip clock selector setup as it is required by some devices. So lets just ignore error in this case.
This should fix various buggy Mackie devices:
[ 649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) [ 649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32) [ 649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
There is also interesting info from the Windows documentation [1] (this is probably why manufacturers dont't even test this feature):
"The USB Audio 2.0 driver doesn't support clock selection. The driver uses the Clock Source Entity, which is selected by default and never issues a Clock Selector Control SET CUR request."
Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-aud... [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175 Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342 Signed-off-by: Alexander Tsoy alexander@tsoy.me Link: https://lore.kernel.org/r/20240201115308.17838-1-alexander@tsoy.me Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/clock.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/usb/clock.c b/sound/usb/clock.c index 33db334e65566..a676ad093d189 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -328,8 +328,16 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, if (chip->quirk_flags & QUIRK_FLAG_SKIP_CLOCK_SELECTOR) return ret; err = uac_clock_selector_set_val(chip, entity_id, cur); - if (err < 0) + if (err < 0) { + if (pins == 1) { + usb_audio_dbg(chip, + "%s(): selector returned an error, " + "assuming a firmware bug, id %d, ret %d\n", + __func__, clock_id, err); + return ret; + } return err; + } }
if (!validate || ret > 0 || !chip->autoclock)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 70fbfc47a392b98e5f8dba70c6efc6839205c982 ]
The module exit path has race between deleting all controllers and freeing 'left over IDs'. To prevent double free a synchronization between nvme_delete_ctrl and ida_destroy has been added by the initial commit.
There is some logic around trying to prevent from hanging forever in wait_for_completion, though it does not handling all cases. E.g. blktests is able to reproduce the situation where the module unload hangs forever.
If we completely rely on the cleanup code executed from the nvme_delete_ctrl path, all IDs will be freed eventually. This makes calling ida_destroy unnecessary. We only have to ensure that all nvme_delete_ctrl code has been executed before we leave nvme_fc_exit_module. This is done by flushing the nvme_delete_wq workqueue.
While at it, remove the unused nvme_fc_wq workqueue too.
Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/fc.c | 47 ++++++------------------------------------ 1 file changed, 6 insertions(+), 41 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c index 1d51925ea67fd..e0f4129c3a8ed 100644 --- a/drivers/nvme/host/fc.c +++ b/drivers/nvme/host/fc.c @@ -221,11 +221,6 @@ static LIST_HEAD(nvme_fc_lport_list); static DEFINE_IDA(nvme_fc_local_port_cnt); static DEFINE_IDA(nvme_fc_ctrl_cnt);
-static struct workqueue_struct *nvme_fc_wq; - -static bool nvme_fc_waiting_to_unload; -static DECLARE_COMPLETION(nvme_fc_unload_proceed); - /* * These items are short-term. They will eventually be moved into * a generic FC class. See comments in module init. @@ -255,8 +250,6 @@ nvme_fc_free_lport(struct kref *ref) /* remove from transport list */ spin_lock_irqsave(&nvme_fc_lock, flags); list_del(&lport->port_list); - if (nvme_fc_waiting_to_unload && list_empty(&nvme_fc_lport_list)) - complete(&nvme_fc_unload_proceed); spin_unlock_irqrestore(&nvme_fc_lock, flags);
ida_free(&nvme_fc_local_port_cnt, lport->localport.port_num); @@ -3896,10 +3889,6 @@ static int __init nvme_fc_init_module(void) { int ret;
- nvme_fc_wq = alloc_workqueue("nvme_fc_wq", WQ_MEM_RECLAIM, 0); - if (!nvme_fc_wq) - return -ENOMEM; - /* * NOTE: * It is expected that in the future the kernel will combine @@ -3917,7 +3906,7 @@ static int __init nvme_fc_init_module(void) ret = class_register(&fc_class); if (ret) { pr_err("couldn't register class fc\n"); - goto out_destroy_wq; + return ret; }
/* @@ -3941,8 +3930,6 @@ static int __init nvme_fc_init_module(void) device_destroy(&fc_class, MKDEV(0, 0)); out_destroy_class: class_unregister(&fc_class); -out_destroy_wq: - destroy_workqueue(nvme_fc_wq);
return ret; } @@ -3962,45 +3949,23 @@ nvme_fc_delete_controllers(struct nvme_fc_rport *rport) spin_unlock(&rport->lock); }
-static void -nvme_fc_cleanup_for_unload(void) +static void __exit nvme_fc_exit_module(void) { struct nvme_fc_lport *lport; struct nvme_fc_rport *rport; - - list_for_each_entry(lport, &nvme_fc_lport_list, port_list) { - list_for_each_entry(rport, &lport->endp_list, endp_list) { - nvme_fc_delete_controllers(rport); - } - } -} - -static void __exit nvme_fc_exit_module(void) -{ unsigned long flags; - bool need_cleanup = false;
spin_lock_irqsave(&nvme_fc_lock, flags); - nvme_fc_waiting_to_unload = true; - if (!list_empty(&nvme_fc_lport_list)) { - need_cleanup = true; - nvme_fc_cleanup_for_unload(); - } + list_for_each_entry(lport, &nvme_fc_lport_list, port_list) + list_for_each_entry(rport, &lport->endp_list, endp_list) + nvme_fc_delete_controllers(rport); spin_unlock_irqrestore(&nvme_fc_lock, flags); - if (need_cleanup) { - pr_info("%s: waiting for ctlr deletes\n", __func__); - wait_for_completion(&nvme_fc_unload_proceed); - pr_info("%s: ctrl deletes complete\n", __func__); - } + flush_workqueue(nvme_delete_wq);
nvmf_unregister_transport(&nvme_fc_transport);
- ida_destroy(&nvme_fc_local_port_cnt); - ida_destroy(&nvme_fc_ctrl_cnt); - device_destroy(&fc_class, MKDEV(0, 0)); class_unregister(&fc_class); - destroy_workqueue(nvme_fc_wq); }
module_init(nvme_fc_init_module);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit dcfad4ab4d6733f2861cd241d8532a0004fc835a ]
The first argument of list_add_tail function is the new element which should be added to the list which is the second argument. Swap the arguments to allow processing more than one element at a time.
Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fcloop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c index c65a73433c05f..e6d4226827b52 100644 --- a/drivers/nvme/target/fcloop.c +++ b/drivers/nvme/target/fcloop.c @@ -358,7 +358,7 @@ fcloop_h2t_ls_req(struct nvme_fc_local_port *localport, if (!rport->targetport) { tls_req->status = -ECONNREFUSED; spin_lock(&rport->lock); - list_add_tail(&rport->ls_list, &tls_req->ls_list); + list_add_tail(&tls_req->ls_list, &rport->ls_list); spin_unlock(&rport->lock); queue_work(nvmet_wq, &rport->ls_work); return ret; @@ -391,7 +391,7 @@ fcloop_h2t_xmt_ls_rsp(struct nvmet_fc_target_port *targetport, if (remoteport) { rport = remoteport->private; spin_lock(&rport->lock); - list_add_tail(&rport->ls_list, &tls_req->ls_list); + list_add_tail(&tls_req->ls_list, &rport->ls_list); spin_unlock(&rport->lock); queue_work(nvmet_wq, &rport->ls_work); } @@ -446,7 +446,7 @@ fcloop_t2h_ls_req(struct nvmet_fc_target_port *targetport, void *hosthandle, if (!tport->remoteport) { tls_req->status = -ECONNREFUSED; spin_lock(&tport->lock); - list_add_tail(&tport->ls_list, &tls_req->ls_list); + list_add_tail(&tls_req->ls_list, &tport->ls_list); spin_unlock(&tport->lock); queue_work(nvmet_wq, &tport->ls_work); return ret;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit c691e6d7e13dab81ac8c7489c83b5dea972522a5 ]
In case we return early out of __nvmet_fc_finish_ls_req() we still have to release the reference on the target port.
Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index bd59990b52501..8cd1ef293769b 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -360,7 +360,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
if (!lsop->req_queued) { spin_unlock_irqrestore(&tgtport->lock, flags); - return; + goto out_puttgtport; }
list_del(&lsop->lsreq_list); @@ -373,6 +373,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop) (lsreq->rqstlen + lsreq->rsplen), DMA_BIDIRECTIONAL);
+out_puttgtport: nvmet_fc_tgtport_put(tgtport); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 4049dc96b8de7aeb3addcea039446e464726a525 ]
When the target executes a disconnect and the host triggers a reconnect immediately, the reconnect command still finds an existing association.
The reconnect crashes later on because nvmet_fc_delete_target_assoc blindly removes resources while the reconnect code wants to use it.
To address this, nvmet_fc_find_target_assoc should not be able to lookup an association which is being removed. The association list is already under RCU lifetime management, so let's properly use it and remove the association from the list and wait for a grace period before cleaning up all. This means we also can drop the RCU management on the queues, because this is now handled via the association itself.
A second step split the execution context so that the initial disconnect command can complete without running the reconnect code in the same context. As usual, this is done by deferring the ->done to a workqueue.
Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Hannes Reinecke hare@suse.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fc.c | 83 ++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 46 deletions(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index 8cd1ef293769b..bb0791c9c0e3a 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -166,7 +166,7 @@ struct nvmet_fc_tgt_assoc { struct nvmet_fc_hostport *hostport; struct nvmet_fc_ls_iod *rcv_disconn; struct list_head a_list; - struct nvmet_fc_tgt_queue __rcu *queues[NVMET_NR_QUEUES + 1]; + struct nvmet_fc_tgt_queue *queues[NVMET_NR_QUEUES + 1]; struct kref ref; struct work_struct del_work; struct rcu_head rcu; @@ -803,14 +803,11 @@ nvmet_fc_alloc_target_queue(struct nvmet_fc_tgt_assoc *assoc, if (!queue) return NULL;
- if (!nvmet_fc_tgt_a_get(assoc)) - goto out_free_queue; - queue->work_q = alloc_workqueue("ntfc%d.%d.%d", 0, 0, assoc->tgtport->fc_target_port.port_num, assoc->a_id, qid); if (!queue->work_q) - goto out_a_put; + goto out_free_queue;
queue->qid = qid; queue->sqsize = sqsize; @@ -832,15 +829,13 @@ nvmet_fc_alloc_target_queue(struct nvmet_fc_tgt_assoc *assoc, goto out_fail_iodlist;
WARN_ON(assoc->queues[qid]); - rcu_assign_pointer(assoc->queues[qid], queue); + assoc->queues[qid] = queue;
return queue;
out_fail_iodlist: nvmet_fc_destroy_fcp_iodlist(assoc->tgtport, queue); destroy_workqueue(queue->work_q); -out_a_put: - nvmet_fc_tgt_a_put(assoc); out_free_queue: kfree(queue); return NULL; @@ -853,12 +848,8 @@ nvmet_fc_tgt_queue_free(struct kref *ref) struct nvmet_fc_tgt_queue *queue = container_of(ref, struct nvmet_fc_tgt_queue, ref);
- rcu_assign_pointer(queue->assoc->queues[queue->qid], NULL); - nvmet_fc_destroy_fcp_iodlist(queue->assoc->tgtport, queue);
- nvmet_fc_tgt_a_put(queue->assoc); - destroy_workqueue(queue->work_q);
kfree_rcu(queue, rcu); @@ -970,7 +961,7 @@ nvmet_fc_find_target_queue(struct nvmet_fc_tgtport *tgtport, rcu_read_lock(); list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) { if (association_id == assoc->association_id) { - queue = rcu_dereference(assoc->queues[qid]); + queue = assoc->queues[qid]; if (queue && (!atomic_read(&queue->connected) || !nvmet_fc_tgt_q_get(queue))) @@ -1173,13 +1164,18 @@ nvmet_fc_target_assoc_free(struct kref *ref) struct nvmet_fc_tgtport *tgtport = assoc->tgtport; struct nvmet_fc_ls_iod *oldls; unsigned long flags; + int i; + + for (i = NVMET_NR_QUEUES; i >= 0; i--) { + if (assoc->queues[i]) + nvmet_fc_delete_target_queue(assoc->queues[i]); + }
/* Send Disconnect now that all i/o has completed */ nvmet_fc_xmt_disconnect_assoc(assoc);
nvmet_fc_free_hostport(assoc->hostport); spin_lock_irqsave(&tgtport->lock, flags); - list_del_rcu(&assoc->a_list); oldls = assoc->rcv_disconn; spin_unlock_irqrestore(&tgtport->lock, flags); /* if pending Rcv Disconnect Association LS, send rsp now */ @@ -1209,7 +1205,7 @@ static void nvmet_fc_delete_target_assoc(struct nvmet_fc_tgt_assoc *assoc) { struct nvmet_fc_tgtport *tgtport = assoc->tgtport; - struct nvmet_fc_tgt_queue *queue; + unsigned long flags; int i, terminating;
terminating = atomic_xchg(&assoc->terminating, 1); @@ -1218,29 +1214,21 @@ nvmet_fc_delete_target_assoc(struct nvmet_fc_tgt_assoc *assoc) if (terminating) return;
+ spin_lock_irqsave(&tgtport->lock, flags); + list_del_rcu(&assoc->a_list); + spin_unlock_irqrestore(&tgtport->lock, flags);
- for (i = NVMET_NR_QUEUES; i >= 0; i--) { - rcu_read_lock(); - queue = rcu_dereference(assoc->queues[i]); - if (!queue) { - rcu_read_unlock(); - continue; - } + synchronize_rcu();
- if (!nvmet_fc_tgt_q_get(queue)) { - rcu_read_unlock(); - continue; - } - rcu_read_unlock(); - nvmet_fc_delete_target_queue(queue); - nvmet_fc_tgt_q_put(queue); + /* ensure all in-flight I/Os have been processed */ + for (i = NVMET_NR_QUEUES; i >= 0; i--) { + if (assoc->queues[i]) + flush_workqueue(assoc->queues[i]->work_q); }
dev_info(tgtport->dev, "{%d:%d} Association deleted\n", tgtport->fc_target_port.port_num, assoc->a_id); - - nvmet_fc_tgt_a_put(assoc); }
static struct nvmet_fc_tgt_assoc * @@ -1493,9 +1481,8 @@ __nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport) list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) { if (!nvmet_fc_tgt_a_get(assoc)) continue; - if (!queue_work(nvmet_wq, &assoc->del_work)) - /* already deleting - release local reference */ - nvmet_fc_tgt_a_put(assoc); + queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_tgt_a_put(assoc); } rcu_read_unlock(); } @@ -1548,9 +1535,8 @@ nvmet_fc_invalidate_host(struct nvmet_fc_target_port *target_port, continue; assoc->hostport->invalid = 1; noassoc = false; - if (!queue_work(nvmet_wq, &assoc->del_work)) - /* already deleting - release local reference */ - nvmet_fc_tgt_a_put(assoc); + queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_tgt_a_put(assoc); } spin_unlock_irqrestore(&tgtport->lock, flags);
@@ -1582,7 +1568,7 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
rcu_read_lock(); list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) { - queue = rcu_dereference(assoc->queues[0]); + queue = assoc->queues[0]; if (queue && queue->nvme_sq.ctrl == ctrl) { if (nvmet_fc_tgt_a_get(assoc)) found_ctrl = true; @@ -1594,9 +1580,8 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl) nvmet_fc_tgtport_put(tgtport);
if (found_ctrl) { - if (!queue_work(nvmet_wq, &assoc->del_work)) - /* already deleting - release local reference */ - nvmet_fc_tgt_a_put(assoc); + queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_tgt_a_put(assoc); return; }
@@ -1626,6 +1611,8 @@ nvmet_fc_unregister_targetport(struct nvmet_fc_target_port *target_port) /* terminate any outstanding associations */ __nvmet_fc_free_assocs(tgtport);
+ flush_workqueue(nvmet_wq); + /* * should terminate LS's as well. However, LS's will be generated * at the tail end of association termination, so they likely don't @@ -1871,9 +1858,6 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport, sizeof(struct fcnvme_ls_disconnect_assoc_acc)), FCNVME_LS_DISCONNECT_ASSOC);
- /* release get taken in nvmet_fc_find_target_assoc */ - nvmet_fc_tgt_a_put(assoc); - /* * The rules for LS response says the response cannot * go back until ABTS's have been sent for all outstanding @@ -1888,8 +1872,6 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport, assoc->rcv_disconn = iod; spin_unlock_irqrestore(&tgtport->lock, flags);
- nvmet_fc_delete_target_assoc(assoc); - if (oldls) { dev_info(tgtport->dev, "{%d:%d} Multiple Disconnect Association LS's " @@ -1905,6 +1887,9 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport, nvmet_fc_xmt_ls_rsp(tgtport, oldls); }
+ queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_tgt_a_put(assoc); + return false; }
@@ -2903,6 +2888,9 @@ nvmet_fc_remove_port(struct nvmet_port *port)
nvmet_fc_portentry_unbind(pe);
+ /* terminate any outstanding associations */ + __nvmet_fc_free_assocs(pe->tgtport); + kfree(pe); }
@@ -2934,6 +2922,9 @@ static int __init nvmet_fc_init_module(void)
static void __exit nvmet_fc_exit_module(void) { + /* ensure any shutdown operation, e.g. delete ctrls have finished */ + flush_workqueue(nvmet_wq); + /* sanity check - all lports should be removed */ if (!list_empty(&nvmet_fc_target_list)) pr_warn("%s: targetport list not empty\n", __func__);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit c5e27b1a779ec25779d04c3af65aebaee6bd4304 ]
Neither struct nvmet_fc_tgt_queue nor struct nvmet_fc_tgt_assoc are data structure which are used in a RCU context. So there is no reason to delay the free operation.
Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fc.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index bb0791c9c0e3a..5fd37e989106c 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -145,7 +145,6 @@ struct nvmet_fc_tgt_queue { struct list_head avail_defer_list; struct workqueue_struct *work_q; struct kref ref; - struct rcu_head rcu; /* array of fcp_iods */ struct nvmet_fc_fcp_iod fod[] __counted_by(sqsize); } __aligned(sizeof(unsigned long long)); @@ -169,7 +168,6 @@ struct nvmet_fc_tgt_assoc { struct nvmet_fc_tgt_queue *queues[NVMET_NR_QUEUES + 1]; struct kref ref; struct work_struct del_work; - struct rcu_head rcu; };
@@ -852,7 +850,7 @@ nvmet_fc_tgt_queue_free(struct kref *ref)
destroy_workqueue(queue->work_q);
- kfree_rcu(queue, rcu); + kfree(queue); }
static void @@ -1185,8 +1183,8 @@ nvmet_fc_target_assoc_free(struct kref *ref) dev_info(tgtport->dev, "{%d:%d} Association freed\n", tgtport->fc_target_port.port_num, assoc->a_id); - kfree_rcu(assoc, rcu); nvmet_fc_tgtport_put(tgtport); + kfree(assoc); }
static void
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit ca121a0f7515591dba0eb5532bfa7ace4dc153ce ]
The hostport data structure is shared between the association, this why we keep track of the users via a refcount. So we should not decrement the refcount on a match and free the hostport several times.
Reported by KASAN.
Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fc.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index 5fd37e989106c..6d111b03d3713 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -1068,8 +1068,6 @@ nvmet_fc_alloc_hostport(struct nvmet_fc_tgtport *tgtport, void *hosthandle) /* new allocation not needed */ kfree(newhost); newhost = match; - /* no new allocation - release reference */ - nvmet_fc_tgtport_put(tgtport); } else { newhost->tgtport = tgtport; newhost->hosthandle = hosthandle;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 3146345c2e9c2f661527054e402b0cfad80105a4 ]
When the target port has not active port binding, there is no point in trying to process the command as it has to fail anyway. Instead adding checks to all commands abort the command early.
Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index 6d111b03d3713..686843eb2ebf3 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -1100,6 +1100,9 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle) int idx; bool needrandom = true;
+ if (!tgtport->pe) + return NULL; + assoc = kzalloc(sizeof(*assoc), GFP_KERNEL); if (!assoc) return NULL; @@ -2522,8 +2525,9 @@ nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
fod->req.cmd = &fod->cmdiubuf.sqe; fod->req.cqe = &fod->rspiubuf.cqe; - if (tgtport->pe) - fod->req.port = tgtport->pe->port; + if (!tgtport->pe) + goto transport_error; + fod->req.port = tgtport->pe->port;
/* clear any response payload */ memset(&fod->rspiubuf, 0, sizeof(fod->rspiubuf));
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit 710c69dbaccdac312e32931abcb8499c1525d397 ]
When deleting an association the shutdown path is deadlocking because we try to flush the nvmet_wq nested. Avoid this by deadlock by deferring the put work into its own work item.
Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fc.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index 686843eb2ebf3..eaed465bae3bd 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -111,6 +111,8 @@ struct nvmet_fc_tgtport { struct nvmet_fc_port_entry *pe; struct kref ref; u32 max_sg_cnt; + + struct work_struct put_work; };
struct nvmet_fc_port_entry { @@ -247,6 +249,13 @@ static int nvmet_fc_tgt_a_get(struct nvmet_fc_tgt_assoc *assoc); static void nvmet_fc_tgt_q_put(struct nvmet_fc_tgt_queue *queue); static int nvmet_fc_tgt_q_get(struct nvmet_fc_tgt_queue *queue); static void nvmet_fc_tgtport_put(struct nvmet_fc_tgtport *tgtport); +static void nvmet_fc_put_tgtport_work(struct work_struct *work) +{ + struct nvmet_fc_tgtport *tgtport = + container_of(work, struct nvmet_fc_tgtport, put_work); + + nvmet_fc_tgtport_put(tgtport); +} static int nvmet_fc_tgtport_get(struct nvmet_fc_tgtport *tgtport); static void nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport, struct nvmet_fc_fcp_iod *fod); @@ -358,7 +367,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
if (!lsop->req_queued) { spin_unlock_irqrestore(&tgtport->lock, flags); - goto out_puttgtport; + goto out_putwork; }
list_del(&lsop->lsreq_list); @@ -371,8 +380,8 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop) (lsreq->rqstlen + lsreq->rsplen), DMA_BIDIRECTIONAL);
-out_puttgtport: - nvmet_fc_tgtport_put(tgtport); +out_putwork: + queue_work(nvmet_wq, &tgtport->put_work); }
static int @@ -1403,6 +1412,7 @@ nvmet_fc_register_targetport(struct nvmet_fc_port_info *pinfo, kref_init(&newrec->ref); ida_init(&newrec->assoc_cnt); newrec->max_sg_cnt = template->max_sgl_segments; + INIT_WORK(&newrec->put_work, nvmet_fc_put_tgtport_work);
ret = nvmet_fc_alloc_ls_iodlist(newrec); if (ret) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Wagner dwagner@suse.de
[ Upstream commit fe506a74589326183297d5abdda02d0c76ae5a8b ]
We have to ensure that the tgtport is not going away before be have remove all the associations.
Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Daniel Wagner dwagner@suse.de Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/fc.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c index eaed465bae3bd..666130878ee0f 100644 --- a/drivers/nvme/target/fc.c +++ b/drivers/nvme/target/fc.c @@ -1091,13 +1091,28 @@ nvmet_fc_alloc_hostport(struct nvmet_fc_tgtport *tgtport, void *hosthandle) }
static void -nvmet_fc_delete_assoc(struct work_struct *work) +nvmet_fc_delete_assoc(struct nvmet_fc_tgt_assoc *assoc) +{ + nvmet_fc_delete_target_assoc(assoc); + nvmet_fc_tgt_a_put(assoc); +} + +static void +nvmet_fc_delete_assoc_work(struct work_struct *work) { struct nvmet_fc_tgt_assoc *assoc = container_of(work, struct nvmet_fc_tgt_assoc, del_work); + struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
- nvmet_fc_delete_target_assoc(assoc); - nvmet_fc_tgt_a_put(assoc); + nvmet_fc_delete_assoc(assoc); + nvmet_fc_tgtport_put(tgtport); +} + +static void +nvmet_fc_schedule_delete_assoc(struct nvmet_fc_tgt_assoc *assoc) +{ + nvmet_fc_tgtport_get(assoc->tgtport); + queue_work(nvmet_wq, &assoc->del_work); }
static struct nvmet_fc_tgt_assoc * @@ -1131,7 +1146,7 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle) assoc->a_id = idx; INIT_LIST_HEAD(&assoc->a_list); kref_init(&assoc->ref); - INIT_WORK(&assoc->del_work, nvmet_fc_delete_assoc); + INIT_WORK(&assoc->del_work, nvmet_fc_delete_assoc_work); atomic_set(&assoc->terminating, 0);
while (needrandom) { @@ -1490,7 +1505,7 @@ __nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport) list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) { if (!nvmet_fc_tgt_a_get(assoc)) continue; - queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_schedule_delete_assoc(assoc); nvmet_fc_tgt_a_put(assoc); } rcu_read_unlock(); @@ -1544,7 +1559,7 @@ nvmet_fc_invalidate_host(struct nvmet_fc_target_port *target_port, continue; assoc->hostport->invalid = 1; noassoc = false; - queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_schedule_delete_assoc(assoc); nvmet_fc_tgt_a_put(assoc); } spin_unlock_irqrestore(&tgtport->lock, flags); @@ -1589,7 +1604,7 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl) nvmet_fc_tgtport_put(tgtport);
if (found_ctrl) { - queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_schedule_delete_assoc(assoc); nvmet_fc_tgt_a_put(assoc); return; } @@ -1896,7 +1911,7 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport, nvmet_fc_xmt_ls_rsp(tgtport, oldls); }
- queue_work(nvmet_wq, &assoc->del_work); + nvmet_fc_schedule_delete_assoc(assoc); nvmet_fc_tgt_a_put(assoc);
return false;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit 88675b22d34e6e815ad4bde09c590ccb2d50c59d ]
In order to scale down the channels, the following sequence of operations happen: 1. server struct is marked for terminate 2. the channel is deallocated in the ses->chans array 3. at a later point the cifsd thread actually terminates the server
Between 2 and 3, there can be calls to find the channel for a server struct. When that happens, there can be an ugly warning that's logged. But this is expected.
So this change does two things: 1. in cifs_ses_get_chan_index, if server->terminate is set, return 2. always make sure server->terminate is set with chan_lock held
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/sess.c | 4 ++++ fs/smb/client/smb2pdu.c | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index a1b9734564711..3b07f54a8567a 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -75,6 +75,10 @@ cifs_ses_get_chan_index(struct cifs_ses *ses, { unsigned int i;
+ /* if the channel is waiting for termination */ + if (server->terminate) + return CIFS_INVAL_CHAN_INDEX; + for (i = 0; i < ses->chan_count; i++) { if (ses->chans[i].server == server) return i; diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index ce2d28537bc8a..97fc2f85b429d 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -178,6 +178,7 @@ cifs_chan_skip_or_disable(struct cifs_ses *ses, }
ses->chans[chan_index].server = NULL; + server->terminate = true; spin_unlock(&ses->chan_lock);
/* @@ -188,7 +189,6 @@ cifs_chan_skip_or_disable(struct cifs_ses *ses, */ cifs_put_tcp_session(server, from_reconnect);
- server->terminate = true; cifs_signal_cifsd_for_reconnect(server, false);
/* mark primary server as needing reconnect */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara pc@manguebit.com
[ Upstream commit 11d4d1dba3315f73d2d1d386f5bf4811a8241d45 ]
With the introduction of SMB2_OP_QUERY_WSL_EA, the client may now send 5 commands in a single compound request in order to query xattrs from potential WSL reparse points, which should be fine as we currently allow up to 5 PDUs in a single compound request. However, if encryption is enabled (e.g. 'seal' mount option) or enforced by the server, current MAX_COMPOUND(5) won't be enough as we require an extra PDU for the transform header.
Fix this by increasing MAX_COMPOUND to 7 and, while we're at it, add an WARN_ON_ONCE() and return -EIO instead of -ENOMEM in case we attempt to send a compound request that couldn't include the extra transform header.
Signed-off-by: Paulo Alcantara pc@manguebit.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/cifsglob.h | 2 +- fs/smb/client/transport.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h index dcc41fe33b705..462554917e5a1 100644 --- a/fs/smb/client/cifsglob.h +++ b/fs/smb/client/cifsglob.h @@ -82,7 +82,7 @@ #define SMB_INTERFACE_POLL_INTERVAL 600
/* maximum number of PDUs in one compound */ -#define MAX_COMPOUND 5 +#define MAX_COMPOUND 7
/* * Default number of credits to keep available for SMB3. diff --git a/fs/smb/client/transport.c b/fs/smb/client/transport.c index e00278fcfa4fa..994d701934329 100644 --- a/fs/smb/client/transport.c +++ b/fs/smb/client/transport.c @@ -435,8 +435,8 @@ smb_send_rqst(struct TCP_Server_Info *server, int num_rqst, if (!(flags & CIFS_TRANSFORM_REQ)) return __smb_send_rqst(server, num_rqst, rqst);
- if (num_rqst > MAX_COMPOUND - 1) - return -ENOMEM; + if (WARN_ON_ONCE(num_rqst > MAX_COMPOUND - 1)) + return -EIO;
if (!server->ops->init_transform_rq) { cifs_server_dbg(VFS, "Encryption requested but transform callback is missing\n");
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Yi yi.zhang@huawei.com
[ Upstream commit 6430dea07e85958fa87d0276c0c4388dd51e630b ]
In ext4_map_blocks(), if we can't find a range of mapping in the extents cache, we are calling ext4_ext_map_blocks() to search the real path and ext4_ext_determine_hole() to determine the hole range. But if the querying range was partially or completely overlaped by a delalloc extent, we can't find it in the real extent path, so the returned hole length could be incorrect.
Fortunately, ext4_ext_put_gap_in_cache() have already handle delalloc extent, but it searches start from the expanded hole_start, doesn't start from the querying range, so the delalloc extent found could not be the one that overlaped the querying range, plus, it also didn't adjust the hole length. Let's just remove ext4_ext_put_gap_in_cache(), handle delalloc and insert adjusted hole extent in ext4_ext_determine_hole().
Signed-off-by: Zhang Yi yi.zhang@huawei.com Suggested-by: Jan Kara jack@suse.cz Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20240127015825.1608160-4-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/extents.c | 111 +++++++++++++++++++++++++++++----------------- 1 file changed, 70 insertions(+), 41 deletions(-)
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 01299b55a567a..fadfca75c3197 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2229,7 +2229,7 @@ static int ext4_fill_es_cache_info(struct inode *inode,
/* - * ext4_ext_determine_hole - determine hole around given block + * ext4_ext_find_hole - find hole around given block according to the given path * @inode: inode we lookup in * @path: path in extent tree to @lblk * @lblk: pointer to logical block around which we want to determine hole @@ -2241,9 +2241,9 @@ static int ext4_fill_es_cache_info(struct inode *inode, * The function returns the length of a hole starting at @lblk. We update @lblk * to the beginning of the hole if we managed to find it. */ -static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode, - struct ext4_ext_path *path, - ext4_lblk_t *lblk) +static ext4_lblk_t ext4_ext_find_hole(struct inode *inode, + struct ext4_ext_path *path, + ext4_lblk_t *lblk) { int depth = ext_depth(inode); struct ext4_extent *ex; @@ -2270,30 +2270,6 @@ static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode, return len; }
-/* - * ext4_ext_put_gap_in_cache: - * calculate boundaries of the gap that the requested block fits into - * and cache this gap - */ -static void -ext4_ext_put_gap_in_cache(struct inode *inode, ext4_lblk_t hole_start, - ext4_lblk_t hole_len) -{ - struct extent_status es; - - ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start, - hole_start + hole_len - 1, &es); - if (es.es_len) { - /* There's delayed extent containing lblock? */ - if (es.es_lblk <= hole_start) - return; - hole_len = min(es.es_lblk - hole_start, hole_len); - } - ext_debug(inode, " -> %u:%u\n", hole_start, hole_len); - ext4_es_insert_extent(inode, hole_start, hole_len, ~0, - EXTENT_STATUS_HOLE); -} - /* * ext4_ext_rm_idx: * removes index from the index block. @@ -4062,6 +4038,69 @@ static int get_implied_cluster_alloc(struct super_block *sb, return 0; }
+/* + * Determine hole length around the given logical block, first try to + * locate and expand the hole from the given @path, and then adjust it + * if it's partially or completely converted to delayed extents, insert + * it into the extent cache tree if it's indeed a hole, finally return + * the length of the determined extent. + */ +static ext4_lblk_t ext4_ext_determine_insert_hole(struct inode *inode, + struct ext4_ext_path *path, + ext4_lblk_t lblk) +{ + ext4_lblk_t hole_start, len; + struct extent_status es; + + hole_start = lblk; + len = ext4_ext_find_hole(inode, path, &hole_start); +again: + ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start, + hole_start + len - 1, &es); + if (!es.es_len) + goto insert_hole; + + /* + * There's a delalloc extent in the hole, handle it if the delalloc + * extent is in front of, behind and straddle the queried range. + */ + if (lblk >= es.es_lblk + es.es_len) { + /* + * The delalloc extent is in front of the queried range, + * find again from the queried start block. + */ + len -= lblk - hole_start; + hole_start = lblk; + goto again; + } else if (in_range(lblk, es.es_lblk, es.es_len)) { + /* + * The delalloc extent containing lblk, it must have been + * added after ext4_map_blocks() checked the extent status + * tree, adjust the length to the delalloc extent's after + * lblk. + */ + len = es.es_lblk + es.es_len - lblk; + return len; + } else { + /* + * The delalloc extent is partially or completely behind + * the queried range, update hole length until the + * beginning of the delalloc extent. + */ + len = min(es.es_lblk - hole_start, len); + } + +insert_hole: + /* Put just found gap into cache to speed up subsequent requests */ + ext_debug(inode, " -> %u:%u\n", hole_start, len); + ext4_es_insert_extent(inode, hole_start, len, ~0, EXTENT_STATUS_HOLE); + + /* Update hole_len to reflect hole size after lblk */ + if (hole_start != lblk) + len -= lblk - hole_start; + + return len; +}
/* * Block allocation/map/preallocation routine for extents based files @@ -4179,22 +4218,12 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode, * we couldn't try to create block if create flag is zero */ if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) { - ext4_lblk_t hole_start, hole_len; + ext4_lblk_t len;
- hole_start = map->m_lblk; - hole_len = ext4_ext_determine_hole(inode, path, &hole_start); - /* - * put just found gap into cache to speed up - * subsequent requests - */ - ext4_ext_put_gap_in_cache(inode, hole_start, hole_len); + len = ext4_ext_determine_insert_hole(inode, path, map->m_lblk);
- /* Update hole_len to reflect hole size after map->m_lblk */ - if (hole_start != map->m_lblk) - hole_len -= map->m_lblk - hole_start; map->m_pblk = 0; - map->m_len = min_t(unsigned int, map->m_len, hole_len); - + map->m_len = min_t(unsigned int, map->m_len, len); goto out; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Szilard Fabian szfabian@bluemarch.art
[ Upstream commit 4255447ad34c5c3785fcdcf76cfa0271d6e5ed39 ]
Another Fujitsu-related patch.
In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728 refuses to work and it's not possible to type for example a dm-crypt passphrase without the help of an external keyboard.
i8042.nomux kernel parameter resolves this issue but using that a PS/2 mouse is detected. This input device is unused even when the i2c-hid-acpi kernel module is blacklisted making the integrated ELAN touchpad (04F3:3092) not working at all.
So this notebook uses a hid-over-i2c touchpad which is managed by the i2c_designware input driver. Since you can't find a PS/2 mouse port on this computer and you can't connect a PS/2 mouse to it even with an official port replicator I think it's safe to not use the PS/2 mouse port at all.
Signed-off-by: Szilard Fabian szfabian@bluemarch.art Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index cd45a65e17f2c..dfc6c581873b7 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -634,6 +634,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { }, .driver_data = (void *)(SERIO_QUIRK_NOAUX) }, + { + /* Fujitsu Lifebook U728 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOAUX) + }, { /* Gigabyte M912 */ .matches = {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit c39de951282df9a60ef70664e4378d88006b2670 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/super.c | 35 +++++++++++++++++------------------ 1 file changed, 17 insertions(+), 18 deletions(-)
diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 9153dffde950c..09d61c6c90aaf 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -866,6 +866,7 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, u16 fn, ao; u8 cluster_bits; u32 boot_off = 0; + sector_t boot_block = 0; const char *hint = "Primary boot";
/* Save original dev_size. Used with alternative boot. */ @@ -873,11 +874,11 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size,
sbi->volume.blocks = dev_size >> PAGE_SHIFT;
- bh = ntfs_bread(sb, 0); +read_boot: + bh = ntfs_bread(sb, boot_block); if (!bh) - return -EIO; + return boot_block ? -EINVAL : -EIO;
-check_boot: err = -EINVAL;
/* Corrupted image; do not read OOB */ @@ -1108,26 +1109,24 @@ static int ntfs_init_from_boot(struct super_block *sb, u32 sector_size, }
out: - if (err == -EINVAL && !bh->b_blocknr && dev_size0 > PAGE_SHIFT) { + brelse(bh); + + if (err == -EINVAL && !boot_block && dev_size0 > PAGE_SHIFT) { u32 block_size = min_t(u32, sector_size, PAGE_SIZE); u64 lbo = dev_size0 - sizeof(*boot);
- /* - * Try alternative boot (last sector) - */ - brelse(bh); - - sb_set_blocksize(sb, block_size); - bh = ntfs_bread(sb, lbo >> blksize_bits(block_size)); - if (!bh) - return -EINVAL; - + boot_block = lbo >> blksize_bits(block_size); boot_off = lbo & (block_size - 1); - hint = "Alternative boot"; - dev_size = dev_size0; /* restore original size. */ - goto check_boot; + if (boot_block && block_size >= boot_off + sizeof(*boot)) { + /* + * Try alternative boot (last sector) + */ + sb_set_blocksize(sb, block_size); + hint = "Alternative boot"; + dev_size = dev_size0; /* restore original size. */ + goto read_boot; + } } - brelse(bh);
return err; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 22457c047ed971f2f2e33be593ddfabd9639a409 ]
Unfortunately reparse attribute is used for many purposes (several dozens). It is not possible here to know is this name symlink or not. To get exactly the type of name we should to open inode (read mft). getattr for opened file (fstat) correctly returns symlink.
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/dir.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c index ec0566b322d5d..22ede4da04502 100644 --- a/fs/ntfs3/dir.c +++ b/fs/ntfs3/dir.c @@ -309,11 +309,31 @@ static inline int ntfs_filldir(struct ntfs_sb_info *sbi, struct ntfs_inode *ni, return 0; }
- /* NTFS: symlinks are "dir + reparse" or "file + reparse" */ - if (fname->dup.fa & FILE_ATTRIBUTE_REPARSE_POINT) - dt_type = DT_LNK; - else - dt_type = (fname->dup.fa & FILE_ATTRIBUTE_DIRECTORY) ? DT_DIR : DT_REG; + /* + * NTFS: symlinks are "dir + reparse" or "file + reparse" + * Unfortunately reparse attribute is used for many purposes (several dozens). + * It is not possible here to know is this name symlink or not. + * To get exactly the type of name we should to open inode (read mft). + * getattr for opened file (fstat) correctly returns symlink. + */ + dt_type = (fname->dup.fa & FILE_ATTRIBUTE_DIRECTORY) ? DT_DIR : DT_REG; + + /* + * It is not reliable to detect the type of name using duplicated information + * stored in parent directory. + * The only correct way to get the type of name - read MFT record and find ATTR_STD. + * The code below is not good idea. + * It does additional locks/reads just to get the type of name. + * Should we use additional mount option to enable branch below? + */ + if ((fname->dup.fa & FILE_ATTRIBUTE_REPARSE_POINT) && + ino != ni->mi.rno) { + struct inode *inode = ntfs_iget5(sbi->sb, &e->ref, NULL); + if (!IS_ERR_OR_NULL(inode)) { + dt_type = fs_umode_to_dtype(inode->i_mode); + iput(inode); + } + }
return !dir_emit(ctx, (s8 *)name, name_len, ino, dt_type); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 6a799c928b78b14999b7705c4cca0f88e297fe96 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/dir.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c index 22ede4da04502..726122ecd39b4 100644 --- a/fs/ntfs3/dir.c +++ b/fs/ntfs3/dir.c @@ -515,11 +515,9 @@ static int ntfs_dir_count(struct inode *dir, bool *is_empty, size_t *dirs, struct INDEX_HDR *hdr; const struct ATTR_FILE_NAME *fname; u32 e_size, off, end; - u64 vbo = 0; size_t drs = 0, fles = 0, bit = 0; - loff_t i_size = ni->vfs_inode.i_size; struct indx_node *node = NULL; - u8 index_bits = ni->dir.index_bits; + size_t max_indx = ni->vfs_inode.i_size >> ni->dir.index_bits;
if (is_empty) *is_empty = true; @@ -563,7 +561,7 @@ static int ntfs_dir_count(struct inode *dir, bool *is_empty, size_t *dirs, fles += 1; }
- if (vbo >= i_size) + if (bit >= max_indx) goto out;
err = indx_used_bit(&ni->dir, ni, &bit); @@ -573,8 +571,7 @@ static int ntfs_dir_count(struct inode *dir, bool *is_empty, size_t *dirs, if (bit == MINUS_ONE_T) goto out;
- vbo = (u64)bit << index_bits; - if (vbo >= i_size) + if (bit >= max_indx) goto out;
err = indx_read(&ni->dir, ni, bit << ni->dir.idx2vbn_bits, @@ -584,7 +581,6 @@ static int ntfs_dir_count(struct inode *dir, bool *is_empty, size_t *dirs,
hdr = &node->index->ihdr; bit += 1; - vbo = (u64)bit << ni->dir.idx2vbn_bits; }
out:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 1918c10e137eae266b8eb0ab1cc14421dcb0e3e2 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/record.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/fs/ntfs3/record.c b/fs/ntfs3/record.c index 53629b1f65e99..7b6423584eaee 100644 --- a/fs/ntfs3/record.c +++ b/fs/ntfs3/record.c @@ -535,8 +535,20 @@ bool mi_remove_attr(struct ntfs_inode *ni, struct mft_inode *mi, return false;
if (ni && is_attr_indexed(attr)) { - le16_add_cpu(&ni->mi.mrec->hard_links, -1); - ni->mi.dirty = true; + u16 links = le16_to_cpu(ni->mi.mrec->hard_links); + struct ATTR_FILE_NAME *fname = + attr->type != ATTR_NAME ? + NULL : + resident_data_ex(attr, + SIZEOF_ATTRIBUTE_FILENAME); + if (fname && fname->type == FILE_NAME_DOS) { + /* Do not decrease links count deleting DOS name. */ + } else if (!links) { + /* minor error. Not critical. */ + } else { + ni->mi.mrec->hard_links = cpu_to_le16(links - 1); + ni->mi.dirty = true; + } }
used -= asize;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 85ba2a75faee759809a7e43b4c103ac59bac1026 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index 5e3d713749185..fa6c7965473c8 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -412,7 +412,6 @@ static struct inode *ntfs_read_mft(struct inode *inode, goto out;
if (!is_match && name) { - /* Reuse rec as buffer for ascii name. */ err = -ENOENT; goto out; } @@ -427,6 +426,7 @@ static struct inode *ntfs_read_mft(struct inode *inode,
if (names != le16_to_cpu(rec->hard_links)) { /* Correct minor error on the fly. Do not mark inode as dirty. */ + ntfs_inode_warn(inode, "Correct links count -> %u.", names); rec->hard_links = cpu_to_le16(names); ni->mi.dirty = true; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 865e7a7700d930d34895a70f8af2eb4e778a5b0e ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/fslog.c | 218 +++++++++++++++++++++-------------------------- 1 file changed, 98 insertions(+), 120 deletions(-)
diff --git a/fs/ntfs3/fslog.c b/fs/ntfs3/fslog.c index 98ccb66508583..7dbb000fc6911 100644 --- a/fs/ntfs3/fslog.c +++ b/fs/ntfs3/fslog.c @@ -974,6 +974,16 @@ static inline void *alloc_rsttbl_from_idx(struct RESTART_TABLE **tbl, u32 vbo) return e; }
+struct restart_info { + u64 last_lsn; + struct RESTART_HDR *r_page; + u32 vbo; + bool chkdsk_was_run; + bool valid_page; + bool initialized; + bool restart; +}; + #define RESTART_SINGLE_PAGE_IO cpu_to_le16(0x0001)
#define NTFSLOG_WRAPPED 0x00000001 @@ -987,6 +997,7 @@ struct ntfs_log { struct ntfs_inode *ni;
u32 l_size; + u32 orig_file_size; u32 sys_page_size; u32 sys_page_mask; u32 page_size; @@ -1040,6 +1051,8 @@ struct ntfs_log {
struct CLIENT_ID client_id; u32 client_undo_commit; + + struct restart_info rst_info, rst_info2; };
static inline u32 lsn_to_vbo(struct ntfs_log *log, const u64 lsn) @@ -1105,16 +1118,6 @@ static inline bool verify_client_lsn(struct ntfs_log *log, lsn <= le64_to_cpu(log->ra->current_lsn) && lsn; }
-struct restart_info { - u64 last_lsn; - struct RESTART_HDR *r_page; - u32 vbo; - bool chkdsk_was_run; - bool valid_page; - bool initialized; - bool restart; -}; - static int read_log_page(struct ntfs_log *log, u32 vbo, struct RECORD_PAGE_HDR **buffer, bool *usa_error) { @@ -1176,7 +1179,7 @@ static int read_log_page(struct ntfs_log *log, u32 vbo, * restart page header. It will stop the first time we find a * valid page header. */ -static int log_read_rst(struct ntfs_log *log, u32 l_size, bool first, +static int log_read_rst(struct ntfs_log *log, bool first, struct restart_info *info) { u32 skip, vbo; @@ -1192,7 +1195,7 @@ static int log_read_rst(struct ntfs_log *log, u32 l_size, bool first, }
/* Loop continuously until we succeed. */ - for (; vbo < l_size; vbo = 2 * vbo + skip, skip = 0) { + for (; vbo < log->l_size; vbo = 2 * vbo + skip, skip = 0) { bool usa_error; bool brst, bchk; struct RESTART_AREA *ra; @@ -1285,22 +1288,17 @@ static int log_read_rst(struct ntfs_log *log, u32 l_size, bool first, /* * Ilog_init_pg_hdr - Init @log from restart page header. */ -static void log_init_pg_hdr(struct ntfs_log *log, u32 sys_page_size, - u32 page_size, u16 major_ver, u16 minor_ver) +static void log_init_pg_hdr(struct ntfs_log *log, u16 major_ver, u16 minor_ver) { - log->sys_page_size = sys_page_size; - log->sys_page_mask = sys_page_size - 1; - log->page_size = page_size; - log->page_mask = page_size - 1; - log->page_bits = blksize_bits(page_size); + log->sys_page_size = log->page_size; + log->sys_page_mask = log->page_mask;
log->clst_per_page = log->page_size >> log->ni->mi.sbi->cluster_bits; if (!log->clst_per_page) log->clst_per_page = 1;
- log->first_page = major_ver >= 2 ? - 0x22 * page_size : - ((sys_page_size << 1) + (page_size << 1)); + log->first_page = major_ver >= 2 ? 0x22 * log->page_size : + 4 * log->page_size; log->major_ver = major_ver; log->minor_ver = minor_ver; } @@ -1308,12 +1306,11 @@ static void log_init_pg_hdr(struct ntfs_log *log, u32 sys_page_size, /* * log_create - Init @log in cases when we don't have a restart area to use. */ -static void log_create(struct ntfs_log *log, u32 l_size, const u64 last_lsn, +static void log_create(struct ntfs_log *log, const u64 last_lsn, u32 open_log_count, bool wrapped, bool use_multi_page) { - log->l_size = l_size; /* All file offsets must be quadword aligned. */ - log->file_data_bits = blksize_bits(l_size) - 3; + log->file_data_bits = blksize_bits(log->l_size) - 3; log->seq_num_mask = (8 << log->file_data_bits) - 1; log->seq_num_bits = sizeof(u64) * 8 - log->file_data_bits; log->seq_num = (last_lsn >> log->file_data_bits) + 2; @@ -3720,10 +3717,8 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) struct ntfs_sb_info *sbi = ni->mi.sbi; struct ntfs_log *log;
- struct restart_info rst_info, rst_info2; - u64 rec_lsn, ra_lsn, checkpt_lsn = 0, rlsn = 0; + u64 rec_lsn, checkpt_lsn = 0, rlsn = 0; struct ATTR_NAME_ENTRY *attr_names = NULL; - struct ATTR_NAME_ENTRY *ane; struct RESTART_TABLE *dptbl = NULL; struct RESTART_TABLE *trtbl = NULL; const struct RESTART_TABLE *rt; @@ -3741,9 +3736,7 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) struct TRANSACTION_ENTRY *tr; struct DIR_PAGE_ENTRY *dp; u32 i, bytes_per_attr_entry; - u32 l_size = ni->vfs_inode.i_size; - u32 orig_file_size = l_size; - u32 page_size, vbo, tail, off, dlen; + u32 vbo, tail, off, dlen; u32 saved_len, rec_len, transact_id; bool use_second_page; struct RESTART_AREA *ra2, *ra = NULL; @@ -3758,52 +3751,50 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) u16 t16; u32 t32;
- /* Get the size of page. NOTE: To replay we can use default page. */ -#if PAGE_SIZE >= DefaultLogPageSize && PAGE_SIZE <= DefaultLogPageSize * 2 - page_size = norm_file_page(PAGE_SIZE, &l_size, true); -#else - page_size = norm_file_page(PAGE_SIZE, &l_size, false); -#endif - if (!page_size) - return -EINVAL; - log = kzalloc(sizeof(struct ntfs_log), GFP_NOFS); if (!log) return -ENOMEM;
log->ni = ni; - log->l_size = l_size; - log->one_page_buf = kmalloc(page_size, GFP_NOFS); + log->l_size = log->orig_file_size = ni->vfs_inode.i_size; + + /* Get the size of page. NOTE: To replay we can use default page. */ +#if PAGE_SIZE >= DefaultLogPageSize && PAGE_SIZE <= DefaultLogPageSize * 2 + log->page_size = norm_file_page(PAGE_SIZE, &log->l_size, true); +#else + log->page_size = norm_file_page(PAGE_SIZE, &log->l_size, false); +#endif + if (!log->page_size) { + err = -EINVAL; + goto out; + }
+ log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); if (!log->one_page_buf) { err = -ENOMEM; goto out; }
- log->page_size = page_size; - log->page_mask = page_size - 1; - log->page_bits = blksize_bits(page_size); + log->page_mask = log->page_size - 1; + log->page_bits = blksize_bits(log->page_size);
/* Look for a restart area on the disk. */ - memset(&rst_info, 0, sizeof(struct restart_info)); - err = log_read_rst(log, l_size, true, &rst_info); + err = log_read_rst(log, true, &log->rst_info); if (err) goto out;
/* remember 'initialized' */ - *initialized = rst_info.initialized; + *initialized = log->rst_info.initialized;
- if (!rst_info.restart) { - if (rst_info.initialized) { + if (!log->rst_info.restart) { + if (log->rst_info.initialized) { /* No restart area but the file is not initialized. */ err = -EINVAL; goto out; }
- log_init_pg_hdr(log, page_size, page_size, 1, 1); - log_create(log, l_size, 0, get_random_u32(), false, false); - - log->ra = ra; + log_init_pg_hdr(log, 1, 1); + log_create(log, 0, get_random_u32(), false, false);
ra = log_create_ra(log); if (!ra) { @@ -3820,25 +3811,26 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) * If the restart offset above wasn't zero then we won't * look for a second restart. */ - if (rst_info.vbo) + if (log->rst_info.vbo) goto check_restart_area;
- memset(&rst_info2, 0, sizeof(struct restart_info)); - err = log_read_rst(log, l_size, false, &rst_info2); + err = log_read_rst(log, false, &log->rst_info2); if (err) goto out;
/* Determine which restart area to use. */ - if (!rst_info2.restart || rst_info2.last_lsn <= rst_info.last_lsn) + if (!log->rst_info2.restart || + log->rst_info2.last_lsn <= log->rst_info.last_lsn) goto use_first_page;
use_second_page = true;
- if (rst_info.chkdsk_was_run && page_size != rst_info.vbo) { + if (log->rst_info.chkdsk_was_run && + log->page_size != log->rst_info.vbo) { struct RECORD_PAGE_HDR *sp = NULL; bool usa_error;
- if (!read_log_page(log, page_size, &sp, &usa_error) && + if (!read_log_page(log, log->page_size, &sp, &usa_error) && sp->rhdr.sign == NTFS_CHKD_SIGNATURE) { use_second_page = false; } @@ -3846,52 +3838,43 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) }
if (use_second_page) { - kfree(rst_info.r_page); - memcpy(&rst_info, &rst_info2, sizeof(struct restart_info)); - rst_info2.r_page = NULL; + kfree(log->rst_info.r_page); + memcpy(&log->rst_info, &log->rst_info2, + sizeof(struct restart_info)); + log->rst_info2.r_page = NULL; }
use_first_page: - kfree(rst_info2.r_page); + kfree(log->rst_info2.r_page);
check_restart_area: /* * If the restart area is at offset 0, we want * to write the second restart area first. */ - log->init_ra = !!rst_info.vbo; + log->init_ra = !!log->rst_info.vbo;
/* If we have a valid page then grab a pointer to the restart area. */ - ra2 = rst_info.valid_page ? - Add2Ptr(rst_info.r_page, - le16_to_cpu(rst_info.r_page->ra_off)) : + ra2 = log->rst_info.valid_page ? + Add2Ptr(log->rst_info.r_page, + le16_to_cpu(log->rst_info.r_page->ra_off)) : NULL;
- if (rst_info.chkdsk_was_run || + if (log->rst_info.chkdsk_was_run || (ra2 && ra2->client_idx[1] == LFS_NO_CLIENT_LE)) { bool wrapped = false; bool use_multi_page = false; u32 open_log_count;
/* Do some checks based on whether we have a valid log page. */ - if (!rst_info.valid_page) { - open_log_count = get_random_u32(); - goto init_log_instance; - } - open_log_count = le32_to_cpu(ra2->open_log_count); - - /* - * If the restart page size isn't changing then we want to - * check how much work we need to do. - */ - if (page_size != le32_to_cpu(rst_info.r_page->sys_page_size)) - goto init_log_instance; + open_log_count = log->rst_info.valid_page ? + le32_to_cpu(ra2->open_log_count) : + get_random_u32();
-init_log_instance: - log_init_pg_hdr(log, page_size, page_size, 1, 1); + log_init_pg_hdr(log, 1, 1);
- log_create(log, l_size, rst_info.last_lsn, open_log_count, - wrapped, use_multi_page); + log_create(log, log->rst_info.last_lsn, open_log_count, wrapped, + use_multi_page);
ra = log_create_ra(log); if (!ra) { @@ -3916,28 +3899,27 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) * use the log file. We must use the system page size instead of the * default size if there is not a clean shutdown. */ - t32 = le32_to_cpu(rst_info.r_page->sys_page_size); - if (page_size != t32) { - l_size = orig_file_size; - page_size = - norm_file_page(t32, &l_size, t32 == DefaultLogPageSize); + t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); + if (log->page_size != t32) { + log->l_size = log->orig_file_size; + log->page_size = norm_file_page(t32, &log->l_size, + t32 == DefaultLogPageSize); }
- if (page_size != t32 || - page_size != le32_to_cpu(rst_info.r_page->page_size)) { + if (log->page_size != t32 || + log->page_size != le32_to_cpu(log->rst_info.r_page->page_size)) { err = -EINVAL; goto out; }
/* If the file size has shrunk then we won't mount it. */ - if (l_size < le64_to_cpu(ra2->l_size)) { + if (log->l_size < le64_to_cpu(ra2->l_size)) { err = -EINVAL; goto out; }
- log_init_pg_hdr(log, page_size, page_size, - le16_to_cpu(rst_info.r_page->major_ver), - le16_to_cpu(rst_info.r_page->minor_ver)); + log_init_pg_hdr(log, le16_to_cpu(log->rst_info.r_page->major_ver), + le16_to_cpu(log->rst_info.r_page->minor_ver));
log->l_size = le64_to_cpu(ra2->l_size); log->seq_num_bits = le32_to_cpu(ra2->seq_num_bits); @@ -3945,7 +3927,7 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) log->seq_num_mask = (8 << log->file_data_bits) - 1; log->last_lsn = le64_to_cpu(ra2->current_lsn); log->seq_num = log->last_lsn >> log->file_data_bits; - log->ra_off = le16_to_cpu(rst_info.r_page->ra_off); + log->ra_off = le16_to_cpu(log->rst_info.r_page->ra_off); log->restart_size = log->sys_page_size - log->ra_off; log->record_header_len = le16_to_cpu(ra2->rec_hdr_len); log->ra_size = le16_to_cpu(ra2->ra_len); @@ -4045,7 +4027,7 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) log->current_avail = current_log_avail(log);
/* Remember which restart area to write first. */ - log->init_ra = rst_info.vbo; + log->init_ra = log->rst_info.vbo;
process_log: /* 1.0, 1.1, 2.0 log->major_ver/minor_ver - short values. */ @@ -4105,7 +4087,7 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) log->client_id.seq_num = cr->seq_num; log->client_id.client_idx = client;
- err = read_rst_area(log, &rst, &ra_lsn); + err = read_rst_area(log, &rst, &checkpt_lsn); if (err) goto out;
@@ -4114,9 +4096,8 @@ int log_replay(struct ntfs_inode *ni, bool *initialized)
bytes_per_attr_entry = !rst->major_ver ? 0x2C : 0x28;
- checkpt_lsn = le64_to_cpu(rst->check_point_start); - if (!checkpt_lsn) - checkpt_lsn = ra_lsn; + if (rst->check_point_start) + checkpt_lsn = le64_to_cpu(rst->check_point_start);
/* Allocate and Read the Transaction Table. */ if (!rst->transact_table_len) @@ -4330,23 +4311,20 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) lcb = NULL;
check_attribute_names2: - if (!rst->attr_names_len) - goto trace_attribute_table; - - ane = attr_names; - if (!oatbl) - goto trace_attribute_table; - while (ane->off) { - /* TODO: Clear table on exit! */ - oe = Add2Ptr(oatbl, le16_to_cpu(ane->off)); - t16 = le16_to_cpu(ane->name_bytes); - oe->name_len = t16 / sizeof(short); - oe->ptr = ane->name; - oe->is_attr_name = 2; - ane = Add2Ptr(ane, sizeof(struct ATTR_NAME_ENTRY) + t16); - } - -trace_attribute_table: + if (rst->attr_names_len && oatbl) { + struct ATTR_NAME_ENTRY *ane = attr_names; + while (ane->off) { + /* TODO: Clear table on exit! */ + oe = Add2Ptr(oatbl, le16_to_cpu(ane->off)); + t16 = le16_to_cpu(ane->name_bytes); + oe->name_len = t16 / sizeof(short); + oe->ptr = ane->name; + oe->is_attr_name = 2; + ane = Add2Ptr(ane, + sizeof(struct ATTR_NAME_ENTRY) + t16); + } + } + /* * If the checkpt_lsn is zero, then this is a freshly * formatted disk and we have no work to do. @@ -5189,7 +5167,7 @@ int log_replay(struct ntfs_inode *ni, bool *initialized) kfree(oatbl); kfree(dptbl); kfree(attr_names); - kfree(rst_info.r_page); + kfree(log->rst_info.r_page);
kfree(ra); kfree(log->one_page_buf);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit a8b0c9fc3a2dba07f697ef7825e04363ff12f071 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/attrib.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index 63f70259edc0d..4b78b669a3bdb 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -886,7 +886,7 @@ int attr_data_get_block(struct ntfs_inode *ni, CLST vcn, CLST clen, CLST *lcn, struct runs_tree *run = &ni->file.run; struct ntfs_sb_info *sbi; u8 cluster_bits; - struct ATTRIB *attr = NULL, *attr_b; + struct ATTRIB *attr, *attr_b; struct ATTR_LIST_ENTRY *le, *le_b; struct mft_inode *mi, *mi_b; CLST hint, svcn, to_alloc, evcn1, next_svcn, asize, end, vcn0, alen; @@ -904,12 +904,8 @@ int attr_data_get_block(struct ntfs_inode *ni, CLST vcn, CLST clen, CLST *lcn, *len = 0; up_read(&ni->file.run_lock);
- if (*len) { - if (*lcn != SPARSE_LCN || !new) - return 0; /* Fast normal way without allocation. */ - else if (clen > *len) - clen = *len; - } + if (*len && (*lcn != SPARSE_LCN || !new)) + return 0; /* Fast normal way without allocation. */
/* No cluster in cache or we need to allocate cluster in hole. */ sbi = ni->mi.sbi; @@ -918,6 +914,17 @@ int attr_data_get_block(struct ntfs_inode *ni, CLST vcn, CLST clen, CLST *lcn, ni_lock(ni); down_write(&ni->file.run_lock);
+ /* Repeat the code above (under write lock). */ + if (!run_lookup_entry(run, vcn, lcn, len, NULL)) + *len = 0; + + if (*len) { + if (*lcn != SPARSE_LCN || !new) + goto out; /* normal way without allocation. */ + if (clen > *len) + clen = *len; + } + le_b = NULL; attr_b = ni_find_attr(ni, NULL, &le_b, ATTR_DATA, NULL, 0, NULL, &mi_b); if (!attr_b) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit d155617006ebc172a80d3eb013c4b867f9a8ada4 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/ntfs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/ntfs.h b/fs/ntfs3/ntfs.h index 86aecbb01a92f..13e96fc63dae5 100644 --- a/fs/ntfs3/ntfs.h +++ b/fs/ntfs3/ntfs.h @@ -523,7 +523,7 @@ struct ATTR_LIST_ENTRY { __le64 vcn; // 0x08: Starting VCN of this attribute. struct MFT_REF ref; // 0x10: MFT record number with attribute. __le16 id; // 0x18: struct ATTRIB ID. - __le16 name[3]; // 0x1A: Just to align. To get real name can use bNameOffset. + __le16 name[]; // 0x1A: Just to align. To get real name can use name_off.
}; // sizeof(0x20)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit a40b73f608e7de2120fdb9ddc8970421b3c50bc9 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/file.c | 19 +++++++++---------- fs/ntfs3/inode.c | 7 +++---- 2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index a5a30a24ce5df..5691f04e6751a 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -188,6 +188,7 @@ static int ntfs_zero_range(struct inode *inode, u64 vbo, u64 vbo_to) u32 bh_next, bh_off, to; sector_t iblock; struct folio *folio; + bool dirty = false;
for (; idx < idx_end; idx += 1, from = 0) { page_off = (loff_t)idx << PAGE_SHIFT; @@ -223,29 +224,27 @@ static int ntfs_zero_range(struct inode *inode, u64 vbo, u64 vbo_to) /* Ok, it's mapped. Make sure it's up-to-date. */ if (folio_test_uptodate(folio)) set_buffer_uptodate(bh); - - if (!buffer_uptodate(bh)) { - err = bh_read(bh, 0); - if (err < 0) { - folio_unlock(folio); - folio_put(folio); - goto out; - } + else if (bh_read(bh, 0) < 0) { + err = -EIO; + folio_unlock(folio); + folio_put(folio); + goto out; }
mark_buffer_dirty(bh); - } while (bh_off = bh_next, iblock += 1, head != (bh = bh->b_this_page));
folio_zero_segment(folio, from, to); + dirty = true;
folio_unlock(folio); folio_put(folio); cond_resched(); } out: - mark_inode_dirty(inode); + if (dirty) + mark_inode_dirty(inode); return err; }
diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index fa6c7965473c8..bba0208c4afde 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -345,9 +345,7 @@ static struct inode *ntfs_read_mft(struct inode *inode, inode->i_size = le16_to_cpu(rp.SymbolicLinkReparseBuffer .PrintNameLength) / sizeof(u16); - ni->i_valid = inode->i_size; - /* Clear directory bit. */ if (ni->ni_flags & NI_FLAG_DIR) { indx_clear(&ni->dir); @@ -653,9 +651,10 @@ static noinline int ntfs_get_block_vbo(struct inode *inode, u64 vbo, off = vbo & (PAGE_SIZE - 1); folio_set_bh(bh, folio, off);
- err = bh_read(bh, 0); - if (err < 0) + if (bh_read(bh, 0) < 0) { + err = -EIO; goto out; + } folio_zero_segment(folio, off + voff, off + block_size); } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 4dea9cd522424d3002894c20b729c6fbfb6fc22b ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/file.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index 5691f04e6751a..bb80ce2eec2f7 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -632,11 +632,17 @@ static long ntfs_fallocate(struct file *file, int mode, loff_t vbo, loff_t len) &ni->file.run, i_size, &ni->i_valid, true, NULL); ni_unlock(ni); + if (err) + goto out; } else if (new_size > i_size) { inode->i_size = new_size; } }
+ err = file_modified(file); + if (err) + goto out; + out: if (map_locked) filemap_invalidate_unlock(mapping); @@ -1040,6 +1046,7 @@ static ssize_t ntfs_file_write_iter(struct kiocb *iocb, struct iov_iter *from) struct address_space *mapping = file->f_mapping; struct inode *inode = mapping->host; ssize_t ret; + int err; struct ntfs_inode *ni = ntfs_i(inode);
if (is_encrypted(ni)) { @@ -1067,6 +1074,12 @@ static ssize_t ntfs_file_write_iter(struct kiocb *iocb, struct iov_iter *from) if (ret <= 0) goto out;
+ err = file_modified(iocb->ki_filp); + if (err) { + ret = err; + goto out; + } + if (WARN_ON(ni->ni_flags & NI_FLAG_COMPRESSED_MASK)) { /* Should never be here, see ntfs_file_open(). */ ret = -EOPNOTSUPP;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit e50f9560b8168a625703a3e7fe1fde9fa53f0837 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/file.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index bb80ce2eec2f7..0ff5d3af28897 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -498,10 +498,14 @@ static long ntfs_fallocate(struct file *file, int mode, loff_t vbo, loff_t len) ni_lock(ni); err = attr_punch_hole(ni, vbo, len, &frame_size); ni_unlock(ni); + if (!err) + goto ok; + if (err != E_NTFS_NOTALIGNED) goto out;
/* Process not aligned punch. */ + err = 0; mask = frame_size - 1; vbo_a = (vbo + mask) & ~mask; end_a = end & ~mask; @@ -524,6 +528,8 @@ static long ntfs_fallocate(struct file *file, int mode, loff_t vbo, loff_t len) ni_lock(ni); err = attr_punch_hole(ni, vbo_a, end_a - vbo_a, NULL); ni_unlock(ni); + if (err) + goto out; } } else if (mode & FALLOC_FL_COLLAPSE_RANGE) { /* @@ -563,6 +569,8 @@ static long ntfs_fallocate(struct file *file, int mode, loff_t vbo, loff_t len) ni_lock(ni); err = attr_insert_range(ni, vbo, len); ni_unlock(ni); + if (err) + goto out; } else { /* Check new size. */ u8 cluster_bits = sbi->cluster_bits; @@ -639,6 +647,7 @@ static long ntfs_fallocate(struct file *file, int mode, loff_t vbo, loff_t len) } }
+ok: err = file_modified(file); if (err) goto out;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 6c3684e703837d2116b5cf4beb37aa7145a66b60 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/file.c | 18 ++++++++++++++++++ fs/ntfs3/frecord.c | 3 +++ fs/ntfs3/inode.c | 21 +++++++++++++++++++-- fs/ntfs3/namei.c | 12 ++++++++++++ fs/ntfs3/ntfs_fs.h | 9 ++++++++- fs/ntfs3/super.c | 12 ++++++++++++ fs/ntfs3/xattr.c | 3 +++ 7 files changed, 75 insertions(+), 3 deletions(-)
diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index 0ff5d3af28897..07ed3d946e7c5 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -260,6 +260,9 @@ static int ntfs_file_mmap(struct file *file, struct vm_area_struct *vma) bool rw = vma->vm_flags & VM_WRITE; int err;
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + if (is_encrypted(ni)) { ntfs_inode_warn(inode, "mmap encrypted not supported"); return -EOPNOTSUPP; @@ -677,6 +680,9 @@ int ntfs3_setattr(struct mnt_idmap *idmap, struct dentry *dentry, umode_t mode = inode->i_mode; int err;
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + err = setattr_prepare(idmap, dentry, attr); if (err) goto out; @@ -732,6 +738,9 @@ static ssize_t ntfs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter) struct inode *inode = file->f_mapping->host; struct ntfs_inode *ni = ntfs_i(inode);
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + if (is_encrypted(ni)) { ntfs_inode_warn(inode, "encrypted i/o not supported"); return -EOPNOTSUPP; @@ -766,6 +775,9 @@ static ssize_t ntfs_file_splice_read(struct file *in, loff_t *ppos, struct inode *inode = in->f_mapping->host; struct ntfs_inode *ni = ntfs_i(inode);
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + if (is_encrypted(ni)) { ntfs_inode_warn(inode, "encrypted i/o not supported"); return -EOPNOTSUPP; @@ -1058,6 +1070,9 @@ static ssize_t ntfs_file_write_iter(struct kiocb *iocb, struct iov_iter *from) int err; struct ntfs_inode *ni = ntfs_i(inode);
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + if (is_encrypted(ni)) { ntfs_inode_warn(inode, "encrypted i/o not supported"); return -EOPNOTSUPP; @@ -1118,6 +1133,9 @@ int ntfs_file_open(struct inode *inode, struct file *file) { struct ntfs_inode *ni = ntfs_i(inode);
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + if (unlikely((is_compressed(ni) || is_encrypted(ni)) && (file->f_flags & O_DIRECT))) { return -EOPNOTSUPP; diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 3df2d9e34b914..8744ba36d4222 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -3259,6 +3259,9 @@ int ni_write_inode(struct inode *inode, int sync, const char *hint) if (is_bad_inode(inode) || sb_rdonly(sb)) return 0;
+ if (unlikely(ntfs3_forced_shutdown(sb))) + return -EIO; + if (!ni_trylock(ni)) { /* 'ni' is under modification, skip for now. */ mark_inode_dirty_sync(inode); diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index bba0208c4afde..85452a6b1d40a 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -852,9 +852,13 @@ static int ntfs_resident_writepage(struct folio *folio, struct writeback_control *wbc, void *data) { struct address_space *mapping = data; - struct ntfs_inode *ni = ntfs_i(mapping->host); + struct inode *inode = mapping->host; + struct ntfs_inode *ni = ntfs_i(inode); int ret;
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + ni_lock(ni); ret = attr_data_write_resident(ni, &folio->page); ni_unlock(ni); @@ -868,7 +872,12 @@ static int ntfs_resident_writepage(struct folio *folio, static int ntfs_writepages(struct address_space *mapping, struct writeback_control *wbc) { - if (is_resident(ntfs_i(mapping->host))) + struct inode *inode = mapping->host; + + if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + + if (is_resident(ntfs_i(inode))) return write_cache_pages(mapping, wbc, ntfs_resident_writepage, mapping); return mpage_writepages(mapping, wbc, ntfs_get_block); @@ -888,6 +897,9 @@ int ntfs_write_begin(struct file *file, struct address_space *mapping, struct inode *inode = mapping->host; struct ntfs_inode *ni = ntfs_i(inode);
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + *pagep = NULL; if (is_resident(ni)) { struct page *page = @@ -1305,6 +1317,11 @@ struct inode *ntfs_create_inode(struct mnt_idmap *idmap, struct inode *dir, goto out1; }
+ if (unlikely(ntfs3_forced_shutdown(sb))) { + err = -EIO; + goto out2; + } + /* Mark rw ntfs as dirty. it will be cleared at umount. */ ntfs_set_state(sbi, NTFS_DIRTY_DIRTY);
diff --git a/fs/ntfs3/namei.c b/fs/ntfs3/namei.c index ee3093be51701..cae41db0aaa7d 100644 --- a/fs/ntfs3/namei.c +++ b/fs/ntfs3/namei.c @@ -181,6 +181,9 @@ static int ntfs_unlink(struct inode *dir, struct dentry *dentry) struct ntfs_inode *ni = ntfs_i(dir); int err;
+ if (unlikely(ntfs3_forced_shutdown(dir->i_sb))) + return -EIO; + ni_lock_dir(ni);
err = ntfs_unlink_inode(dir, dentry); @@ -199,6 +202,9 @@ static int ntfs_symlink(struct mnt_idmap *idmap, struct inode *dir, u32 size = strlen(symname); struct inode *inode;
+ if (unlikely(ntfs3_forced_shutdown(dir->i_sb))) + return -EIO; + inode = ntfs_create_inode(idmap, dir, dentry, NULL, S_IFLNK | 0777, 0, symname, size, NULL);
@@ -227,6 +233,9 @@ static int ntfs_rmdir(struct inode *dir, struct dentry *dentry) struct ntfs_inode *ni = ntfs_i(dir); int err;
+ if (unlikely(ntfs3_forced_shutdown(dir->i_sb))) + return -EIO; + ni_lock_dir(ni);
err = ntfs_unlink_inode(dir, dentry); @@ -264,6 +273,9 @@ static int ntfs_rename(struct mnt_idmap *idmap, struct inode *dir, 1024); static_assert(PATH_MAX >= 4 * 1024);
+ if (unlikely(ntfs3_forced_shutdown(sb))) + return -EIO; + if (flags & ~RENAME_NOREPLACE) return -EINVAL;
diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index a46d30b84bf39..7ce61fb89216a 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -61,6 +61,8 @@ enum utf16_endian;
/* sbi->flags */ #define NTFS_FLAGS_NODISCARD 0x00000001 +/* ntfs in shutdown state. */ +#define NTFS_FLAGS_SHUTDOWN 0x00000002 /* Set when LogFile is replaying. */ #define NTFS_FLAGS_LOG_REPLAYING 0x00000008 /* Set when we changed first MFT's which copy must be updated in $MftMirr. */ @@ -226,7 +228,7 @@ struct ntfs_sb_info { u64 maxbytes; // Maximum size for normal files. u64 maxbytes_sparse; // Maximum size for sparse file.
- u32 flags; // See NTFS_FLAGS_XXX. + unsigned long flags; // See NTFS_FLAGS_
CLST zone_max; // Maximum MFT zone length in clusters CLST bad_clusters; // The count of marked bad clusters. @@ -999,6 +1001,11 @@ static inline struct ntfs_sb_info *ntfs_sb(struct super_block *sb) return sb->s_fs_info; }
+static inline bool ntfs3_forced_shutdown(struct super_block *sb) +{ + return test_bit(NTFS_FLAGS_SHUTDOWN, &ntfs_sb(sb)->flags); +} + /* * ntfs_up_cluster - Align up on cluster boundary. */ diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 09d61c6c90aaf..af8521a6ed954 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -714,6 +714,14 @@ static int ntfs_show_options(struct seq_file *m, struct dentry *root) return 0; }
+/* + * ntfs_shutdown - super_operations::shutdown + */ +static void ntfs_shutdown(struct super_block *sb) +{ + set_bit(NTFS_FLAGS_SHUTDOWN, &ntfs_sb(sb)->flags); +} + /* * ntfs_sync_fs - super_operations::sync_fs */ @@ -724,6 +732,9 @@ static int ntfs_sync_fs(struct super_block *sb, int wait) struct ntfs_inode *ni; struct inode *inode;
+ if (unlikely(ntfs3_forced_shutdown(sb))) + return -EIO; + ni = sbi->security.ni; if (ni) { inode = &ni->vfs_inode; @@ -763,6 +774,7 @@ static const struct super_operations ntfs_sops = { .put_super = ntfs_put_super, .statfs = ntfs_statfs, .show_options = ntfs_show_options, + .shutdown = ntfs_shutdown, .sync_fs = ntfs_sync_fs, .write_inode = ntfs3_write_inode, }; diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 4274b6f31cfa1..071356d096d83 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -744,6 +744,9 @@ static int ntfs_getxattr(const struct xattr_handler *handler, struct dentry *de, int err; struct ntfs_inode *ni = ntfs_i(inode);
+ if (unlikely(ntfs3_forced_shutdown(inode->i_sb))) + return -EIO; + /* Dispatch request. */ if (!strcmp(name, SYSTEM_DOS_ATTRIB)) { /* system.dos_attrib */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 97ec56d390a3a0077b36cb38627f671c72dddce6 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/fsntfs.c | 3 ++- fs/ntfs3/ntfs_fs.h | 6 +++--- fs/ntfs3/super.c | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index fbfe21dbb4259..350461d8cece5 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -853,7 +853,8 @@ void ntfs_update_mftmirr(struct ntfs_sb_info *sbi, int wait) /* * sb can be NULL here. In this case sbi->flags should be 0 too. */ - if (!sb || !(sbi->flags & NTFS_FLAGS_MFTMIRR)) + if (!sb || !(sbi->flags & NTFS_FLAGS_MFTMIRR) || + unlikely(ntfs3_forced_shutdown(sb))) return;
blocksize = sb->s_blocksize; diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 7ce61fb89216a..3fc027ce6e4d9 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -62,7 +62,7 @@ enum utf16_endian; /* sbi->flags */ #define NTFS_FLAGS_NODISCARD 0x00000001 /* ntfs in shutdown state. */ -#define NTFS_FLAGS_SHUTDOWN 0x00000002 +#define NTFS_FLAGS_SHUTDOWN_BIT 0x00000002 /* == 4*/ /* Set when LogFile is replaying. */ #define NTFS_FLAGS_LOG_REPLAYING 0x00000008 /* Set when we changed first MFT's which copy must be updated in $MftMirr. */ @@ -1001,9 +1001,9 @@ static inline struct ntfs_sb_info *ntfs_sb(struct super_block *sb) return sb->s_fs_info; }
-static inline bool ntfs3_forced_shutdown(struct super_block *sb) +static inline int ntfs3_forced_shutdown(struct super_block *sb) { - return test_bit(NTFS_FLAGS_SHUTDOWN, &ntfs_sb(sb)->flags); + return test_bit(NTFS_FLAGS_SHUTDOWN_BIT, &ntfs_sb(sb)->flags); }
/* diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index af8521a6ed954..65ef4b57411f0 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -719,7 +719,7 @@ static int ntfs_show_options(struct seq_file *m, struct dentry *root) */ static void ntfs_shutdown(struct super_block *sb) { - set_bit(NTFS_FLAGS_SHUTDOWN, &ntfs_sb(sb)->flags); + set_bit(NTFS_FLAGS_SHUTDOWN_BIT, &ntfs_sb(sb)->flags); }
/*
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit d6ca2d253900b9b0a3a1ad77541d606010f5e5eb ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/dir.c | 4 +++- fs/ntfs3/fsntfs.c | 2 +- fs/ntfs3/ntfs.h | 2 +- fs/ntfs3/ntfs_fs.h | 2 +- 4 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c index 726122ecd39b4..9f6dd445eb04d 100644 --- a/fs/ntfs3/dir.c +++ b/fs/ntfs3/dir.c @@ -536,8 +536,10 @@ static int ntfs_dir_count(struct inode *dir, bool *is_empty, size_t *dirs, e = Add2Ptr(hdr, off); e_size = le16_to_cpu(e->size); if (e_size < sizeof(struct NTFS_DE) || - off + e_size > end) + off + e_size > end) { + /* Looks like corruption. */ break; + }
if (de_is_last(e)) break; diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index 350461d8cece5..321978019407f 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -2129,8 +2129,8 @@ int ntfs_insert_security(struct ntfs_sb_info *sbi, if (le32_to_cpu(d_security->size) == new_sec_size && d_security->key.hash == hash_key.hash && !memcmp(d_security + 1, sd, size_sd)) { - *security_id = d_security->key.sec_id; /* Such security already exists. */ + *security_id = d_security->key.sec_id; err = 0; goto out; } diff --git a/fs/ntfs3/ntfs.h b/fs/ntfs3/ntfs.h index 13e96fc63dae5..c8981429c7213 100644 --- a/fs/ntfs3/ntfs.h +++ b/fs/ntfs3/ntfs.h @@ -523,7 +523,7 @@ struct ATTR_LIST_ENTRY { __le64 vcn; // 0x08: Starting VCN of this attribute. struct MFT_REF ref; // 0x10: MFT record number with attribute. __le16 id; // 0x18: struct ATTRIB ID. - __le16 name[]; // 0x1A: Just to align. To get real name can use name_off. + __le16 name[]; // 0x1A: To get real name use name_off.
}; // sizeof(0x20)
diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 3fc027ce6e4d9..8079f3069a1bf 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -874,7 +874,7 @@ int ntfs_init_acl(struct mnt_idmap *idmap, struct inode *inode,
int ntfs_acl_chmod(struct mnt_idmap *idmap, struct dentry *dentry); ssize_t ntfs_listxattr(struct dentry *dentry, char *buffer, size_t size); -extern const struct xattr_handler * const ntfs_xattr_handlers[]; +extern const struct xattr_handler *const ntfs_xattr_handlers[];
int ntfs_save_wsl_perm(struct inode *inode, __le16 *ea_size); void ntfs_get_wsl_perm(struct inode *inode);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit aaab47f204aaf47838241d57bf8662c8840de60a ]
It is preferable to exit through the out: label because internal debugging functions are located there.
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/attrib.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index 4b78b669a3bdb..646e2dad1b757 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -1743,8 +1743,10 @@ int attr_allocate_frame(struct ntfs_inode *ni, CLST frame, size_t compr_size, le_b = NULL; attr_b = ni_find_attr(ni, NULL, &le_b, ATTR_DATA, NULL, 0, NULL, &mi_b); - if (!attr_b) - return -ENOENT; + if (!attr_b) { + err = -ENOENT; + goto out; + }
attr = attr_b; le = le_b; @@ -1825,13 +1827,15 @@ int attr_allocate_frame(struct ntfs_inode *ni, CLST frame, size_t compr_size, ok: run_truncate_around(run, vcn); out: - if (new_valid > data_size) - new_valid = data_size; + if (attr_b) { + if (new_valid > data_size) + new_valid = data_size;
- valid_size = le64_to_cpu(attr_b->nres.valid_size); - if (new_valid != valid_size) { - attr_b->nres.valid_size = cpu_to_le64(valid_size); - mi_b->dirty = true; + valid_size = le64_to_cpu(attr_b->nres.valid_size); + if (new_valid != valid_size) { + attr_b->nres.valid_size = cpu_to_le64(valid_size); + mi_b->dirty = true; + } }
return err;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 652483bfbc45137e8dce556c9ddbd4458dad4452 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/frecord.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 8744ba36d4222..6ff4f70ba0775 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -3291,7 +3291,7 @@ int ni_write_inode(struct inode *inode, int sync, const char *hint) modified = true; }
- ts = inode_get_mtime(inode); + ts = inode_get_ctime(inode); dup.c_time = kernel2nt(&ts); if (std->c_time != dup.c_time) { std->c_time = dup.c_time;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 4cdfb6e7bc9c80142d33bf1d4653a73fa678ba56 ]
The use of sizeof(struct ATTR_LIST_ENTRY) has been replaced with le_size(0) due to alignment peculiarities on different platforms.
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202312071005.g6YrbaIe-lkp@intel.com/ Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/attrlist.c | 8 ++++---- fs/ntfs3/ntfs.h | 2 -- 2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c index 7c01735d1219d..48e7da47c6b71 100644 --- a/fs/ntfs3/attrlist.c +++ b/fs/ntfs3/attrlist.c @@ -127,12 +127,13 @@ struct ATTR_LIST_ENTRY *al_enumerate(struct ntfs_inode *ni, { size_t off; u16 sz; + const unsigned le_min_size = le_size(0);
if (!le) { le = ni->attr_list.le; } else { sz = le16_to_cpu(le->size); - if (sz < sizeof(struct ATTR_LIST_ENTRY)) { + if (sz < le_min_size) { /* Impossible 'cause we should not return such le. */ return NULL; } @@ -141,7 +142,7 @@ struct ATTR_LIST_ENTRY *al_enumerate(struct ntfs_inode *ni,
/* Check boundary. */ off = PtrOffset(ni->attr_list.le, le); - if (off + sizeof(struct ATTR_LIST_ENTRY) > ni->attr_list.size) { + if (off + le_min_size > ni->attr_list.size) { /* The regular end of list. */ return NULL; } @@ -149,8 +150,7 @@ struct ATTR_LIST_ENTRY *al_enumerate(struct ntfs_inode *ni, sz = le16_to_cpu(le->size);
/* Check le for errors. */ - if (sz < sizeof(struct ATTR_LIST_ENTRY) || - off + sz > ni->attr_list.size || + if (sz < le_min_size || off + sz > ni->attr_list.size || sz < le->name_off + le->name_len * sizeof(short)) { return NULL; } diff --git a/fs/ntfs3/ntfs.h b/fs/ntfs3/ntfs.h index c8981429c7213..9c7478150a035 100644 --- a/fs/ntfs3/ntfs.h +++ b/fs/ntfs3/ntfs.h @@ -527,8 +527,6 @@ struct ATTR_LIST_ENTRY {
}; // sizeof(0x20)
-static_assert(sizeof(struct ATTR_LIST_ENTRY) == 0x20); - static inline u32 le_size(u8 name_len) { return ALIGN(offsetof(struct ATTR_LIST_ENTRY, name) +
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit ddb17dc880eeaac37b5a6e984de07b882de7d78d ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/attrlist.c | 4 ++-- fs/ntfs3/bitmap.c | 4 ++-- fs/ntfs3/frecord.c | 4 ++-- fs/ntfs3/super.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/fs/ntfs3/attrlist.c b/fs/ntfs3/attrlist.c index 48e7da47c6b71..9f4bd8d260901 100644 --- a/fs/ntfs3/attrlist.c +++ b/fs/ntfs3/attrlist.c @@ -29,7 +29,7 @@ static inline bool al_is_valid_le(const struct ntfs_inode *ni, void al_destroy(struct ntfs_inode *ni) { run_close(&ni->attr_list.run); - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.size = 0; ni->attr_list.dirty = false; @@ -318,7 +318,7 @@ int al_add_le(struct ntfs_inode *ni, enum ATTR_TYPE type, const __le16 *name, memcpy(ptr, al->le, off); memcpy(Add2Ptr(ptr, off + sz), le, old_size - off); le = Add2Ptr(ptr, off); - kfree(al->le); + kvfree(al->le); al->le = ptr; } else { memmove(Add2Ptr(le, sz), le, old_size - off); diff --git a/fs/ntfs3/bitmap.c b/fs/ntfs3/bitmap.c index 63f14a0232f6a..845f9b22deef0 100644 --- a/fs/ntfs3/bitmap.c +++ b/fs/ntfs3/bitmap.c @@ -124,7 +124,7 @@ void wnd_close(struct wnd_bitmap *wnd) { struct rb_node *node, *next;
- kfree(wnd->free_bits); + kvfree(wnd->free_bits); wnd->free_bits = NULL; run_close(&wnd->run);
@@ -1360,7 +1360,7 @@ int wnd_extend(struct wnd_bitmap *wnd, size_t new_bits) memcpy(new_free, wnd->free_bits, wnd->nwnd * sizeof(short)); memset(new_free + wnd->nwnd, 0, (new_wnd - wnd->nwnd) * sizeof(short)); - kfree(wnd->free_bits); + kvfree(wnd->free_bits); wnd->free_bits = new_free; }
diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 6ff4f70ba0775..2636ab7640ace 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -778,7 +778,7 @@ static int ni_try_remove_attr_list(struct ntfs_inode *ni) run_deallocate(sbi, &ni->attr_list.run, true); run_close(&ni->attr_list.run); ni->attr_list.size = 0; - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.dirty = false;
@@ -927,7 +927,7 @@ int ni_create_attr_list(struct ntfs_inode *ni) return 0;
out: - kfree(ni->attr_list.le); + kvfree(ni->attr_list.le); ni->attr_list.le = NULL; ni->attr_list.size = 0; return err; diff --git a/fs/ntfs3/super.c b/fs/ntfs3/super.c index 65ef4b57411f0..c55a29793a8d8 100644 --- a/fs/ntfs3/super.c +++ b/fs/ntfs3/super.c @@ -625,7 +625,7 @@ static void ntfs3_free_sbi(struct ntfs_sb_info *sbi) { kfree(sbi->new_rec); kvfree(ntfs_put_shared(sbi->upcase)); - kfree(sbi->def_table); + kvfree(sbi->def_table); kfree(sbi->compress.lznt); #ifdef CONFIG_NTFS3_LZX_XPRESS xpress_free_decompressor(sbi->compress.xpress);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ism Hong ism.hong@gmail.com
[ Upstream commit d6d33f03baa43d763fe094ca926eeae7d3421d07 ]
Since the buffer cache for ntfs3 metadata is not released until the file system is unmounted, allocating from the movable zone may result in cma allocation failures. This is due to the page still being used by ntfs3, leading to migration failures.
To address this, this commit use sb_bread_umovable() instead of sb_bread(). This change prevents allocation from the movable zone, ensuring compatibility with scenarios where the buffer head is not released until unmount. This patch is inspired by commit a8ac900b8163("ext4: use non-movable memory for the ext4 superblock").
The issue is found when playing video files stored in NTFS on the Android TV platform. During this process, the media parser reads the video file, causing ntfs3 to allocate buffer cache from the CMA area. Subsequently, the hardware decoder attempts to allocate memory from the same CMA area. However, the page is still in use by ntfs3, resulting in a migrate failure in alloc_contig_range().
The pinned page and allocating stacktrace reported by page owner shows below:
page:ffffffff00b68880 refcount:3 mapcount:0 mapping:ffffff80046aa828 index:0xc0040 pfn:0x20fa4 aops:def_blk_aops ino:0 flags: 0x2020(active|private) page dumped because: migration failure page last allocated via order 0, migratetype Movable, gfp_mask 0x108c48 (GFP_NOFS|__GFP_NOFAIL|__GFP_HARDWALL|__GFP_MOVABLE), page_owner tracks the page as allocated prep_new_page get_page_from_freelist __alloc_pages_nodemask pagecache_get_page __getblk_gfp __bread_gfp ntfs_read_run_nb ntfs_read_bh mi_read ntfs_iget5 dir_search_u ntfs_lookup __lookup_slow lookup_slow walk_component path_lookupat
Signed-off-by: Ism Hong ism.hong@gmail.com Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/ntfs_fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 8079f3069a1bf..38e0570729c6f 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -1035,7 +1035,7 @@ static inline u64 bytes_to_block(const struct super_block *sb, u64 size) static inline struct buffer_head *ntfs_bread(struct super_block *sb, sector_t block) { - struct buffer_head *bh = sb_bread(sb, block); + struct buffer_head *bh = sb_bread_unmovable(sb, block);
if (bh) return bh;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 5ca87d01eba7bdfe9536a157ca33c1455bb8d16c ]
It used in test environment.
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/fsntfs.c | 24 ++++++++++++++++++++++++ fs/ntfs3/ntfs_fs.h | 14 +------------- 2 files changed, 25 insertions(+), 13 deletions(-)
diff --git a/fs/ntfs3/fsntfs.c b/fs/ntfs3/fsntfs.c index 321978019407f..ae2ef5c11868c 100644 --- a/fs/ntfs3/fsntfs.c +++ b/fs/ntfs3/fsntfs.c @@ -1007,6 +1007,30 @@ static inline __le32 security_hash(const void *sd, size_t bytes) return cpu_to_le32(hash); }
+/* + * simple wrapper for sb_bread_unmovable. + */ +struct buffer_head *ntfs_bread(struct super_block *sb, sector_t block) +{ + struct ntfs_sb_info *sbi = sb->s_fs_info; + struct buffer_head *bh; + + if (unlikely(block >= sbi->volume.blocks)) { + /* prevent generic message "attempt to access beyond end of device" */ + ntfs_err(sb, "try to read out of volume at offset 0x%llx", + (u64)block << sb->s_blocksize_bits); + return NULL; + } + + bh = sb_bread_unmovable(sb, block); + if (bh) + return bh; + + ntfs_err(sb, "failed to read volume at offset 0x%llx", + (u64)block << sb->s_blocksize_bits); + return NULL; +} + int ntfs_sb_read(struct super_block *sb, u64 lbo, size_t bytes, void *buffer) { struct block_device *bdev = sb->s_bdev; diff --git a/fs/ntfs3/ntfs_fs.h b/fs/ntfs3/ntfs_fs.h index 38e0570729c6f..627419bd6f778 100644 --- a/fs/ntfs3/ntfs_fs.h +++ b/fs/ntfs3/ntfs_fs.h @@ -586,6 +586,7 @@ bool check_index_header(const struct INDEX_HDR *hdr, size_t bytes); int log_replay(struct ntfs_inode *ni, bool *initialized);
/* Globals from fsntfs.c */ +struct buffer_head *ntfs_bread(struct super_block *sb, sector_t block); bool ntfs_fix_pre_write(struct NTFS_RECORD_HEADER *rhdr, size_t bytes); int ntfs_fix_post_read(struct NTFS_RECORD_HEADER *rhdr, size_t bytes, bool simple); @@ -1032,19 +1033,6 @@ static inline u64 bytes_to_block(const struct super_block *sb, u64 size) return (size + sb->s_blocksize - 1) >> sb->s_blocksize_bits; }
-static inline struct buffer_head *ntfs_bread(struct super_block *sb, - sector_t block) -{ - struct buffer_head *bh = sb_bread_unmovable(sb, block); - - if (bh) - return bh; - - ntfs_err(sb, "failed to read volume at offset 0x%llx", - (u64)block << sb->s_blocksize_bits); - return NULL; -} - static inline struct ntfs_inode *ntfs_i(struct inode *inode) { return container_of(inode, struct ntfs_inode, vfs_inode);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 4fd6c08a16d7f1ba10212c9ef7bc73218144b463 ]
Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/attrib.c | 4 ++-- fs/ntfs3/dir.c | 2 +- fs/ntfs3/file.c | 11 ++++++----- fs/ntfs3/frecord.c | 10 +++++----- fs/ntfs3/index.c | 8 ++++---- fs/ntfs3/inode.c | 2 +- 6 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/fs/ntfs3/attrib.c b/fs/ntfs3/attrib.c index 646e2dad1b757..7aadf50109994 100644 --- a/fs/ntfs3/attrib.c +++ b/fs/ntfs3/attrib.c @@ -2084,7 +2084,7 @@ int attr_collapse_range(struct ntfs_inode *ni, u64 vbo, u64 bytes)
/* Update inode size. */ ni->i_valid = valid_size; - ni->vfs_inode.i_size = data_size; + i_size_write(&ni->vfs_inode, data_size); inode_set_bytes(&ni->vfs_inode, total_size); ni->ni_flags |= NI_FLAG_UPDATE_PARENT; mark_inode_dirty(&ni->vfs_inode); @@ -2499,7 +2499,7 @@ int attr_insert_range(struct ntfs_inode *ni, u64 vbo, u64 bytes) mi_b->dirty = true;
done: - ni->vfs_inode.i_size += bytes; + i_size_write(&ni->vfs_inode, ni->vfs_inode.i_size + bytes); ni->ni_flags |= NI_FLAG_UPDATE_PARENT; mark_inode_dirty(&ni->vfs_inode);
diff --git a/fs/ntfs3/dir.c b/fs/ntfs3/dir.c index 9f6dd445eb04d..effa6accf8a85 100644 --- a/fs/ntfs3/dir.c +++ b/fs/ntfs3/dir.c @@ -517,7 +517,7 @@ static int ntfs_dir_count(struct inode *dir, bool *is_empty, size_t *dirs, u32 e_size, off, end; size_t drs = 0, fles = 0, bit = 0; struct indx_node *node = NULL; - size_t max_indx = ni->vfs_inode.i_size >> ni->dir.index_bits; + size_t max_indx = i_size_read(&ni->vfs_inode) >> ni->dir.index_bits;
if (is_empty) *is_empty = true; diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index 07ed3d946e7c5..b702543a87953 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -646,7 +646,7 @@ static long ntfs_fallocate(struct file *file, int mode, loff_t vbo, loff_t len) if (err) goto out; } else if (new_size > i_size) { - inode->i_size = new_size; + i_size_write(inode, new_size); } }
@@ -696,7 +696,7 @@ int ntfs3_setattr(struct mnt_idmap *idmap, struct dentry *dentry, goto out; } inode_dio_wait(inode); - oldsize = inode->i_size; + oldsize = i_size_read(inode); newsize = attr->ia_size;
if (newsize <= oldsize) @@ -708,7 +708,7 @@ int ntfs3_setattr(struct mnt_idmap *idmap, struct dentry *dentry, goto out;
ni->ni_flags |= NI_FLAG_UPDATE_PARENT; - inode->i_size = newsize; + i_size_write(inode, newsize); }
setattr_copy(idmap, inode, attr); @@ -847,7 +847,7 @@ static ssize_t ntfs_compress_write(struct kiocb *iocb, struct iov_iter *from) size_t count = iov_iter_count(from); loff_t pos = iocb->ki_pos; struct inode *inode = file_inode(file); - loff_t i_size = inode->i_size; + loff_t i_size = i_size_read(inode); struct address_space *mapping = inode->i_mapping; struct ntfs_inode *ni = ntfs_i(inode); u64 valid = ni->i_valid; @@ -1177,7 +1177,8 @@ static int ntfs_file_release(struct inode *inode, struct file *file) down_write(&ni->file.run_lock);
err = attr_set_size(ni, ATTR_DATA, NULL, 0, &ni->file.run, - inode->i_size, &ni->i_valid, false, NULL); + i_size_read(inode), &ni->i_valid, false, + NULL);
up_write(&ni->file.run_lock); ni_unlock(ni); diff --git a/fs/ntfs3/frecord.c b/fs/ntfs3/frecord.c index 2636ab7640ace..3b42938a9d3b2 100644 --- a/fs/ntfs3/frecord.c +++ b/fs/ntfs3/frecord.c @@ -2099,7 +2099,7 @@ int ni_readpage_cmpr(struct ntfs_inode *ni, struct page *page) gfp_t gfp_mask; struct page *pg;
- if (vbo >= ni->vfs_inode.i_size) { + if (vbo >= i_size_read(&ni->vfs_inode)) { SetPageUptodate(page); err = 0; goto out; @@ -2173,7 +2173,7 @@ int ni_decompress_file(struct ntfs_inode *ni) { struct ntfs_sb_info *sbi = ni->mi.sbi; struct inode *inode = &ni->vfs_inode; - loff_t i_size = inode->i_size; + loff_t i_size = i_size_read(inode); struct address_space *mapping = inode->i_mapping; gfp_t gfp_mask = mapping_gfp_mask(mapping); struct page **pages = NULL; @@ -2457,6 +2457,7 @@ int ni_read_frame(struct ntfs_inode *ni, u64 frame_vbo, struct page **pages, struct ATTR_LIST_ENTRY *le = NULL; struct runs_tree *run = &ni->file.run; u64 valid_size = ni->i_valid; + loff_t i_size = i_size_read(&ni->vfs_inode); u64 vbo_disk; size_t unc_size; u32 frame_size, i, npages_disk, ondisk_size; @@ -2548,7 +2549,7 @@ int ni_read_frame(struct ntfs_inode *ni, u64 frame_vbo, struct page **pages, } }
- frames = (ni->vfs_inode.i_size - 1) >> frame_bits; + frames = (i_size - 1) >> frame_bits;
err = attr_wof_frame_info(ni, attr, run, frame64, frames, frame_bits, &ondisk_size, &vbo_data); @@ -2556,8 +2557,7 @@ int ni_read_frame(struct ntfs_inode *ni, u64 frame_vbo, struct page **pages, goto out2;
if (frame64 == frames) { - unc_size = 1 + ((ni->vfs_inode.i_size - 1) & - (frame_size - 1)); + unc_size = 1 + ((i_size - 1) & (frame_size - 1)); ondisk_size = attr_size(attr) - vbo_data; } else { unc_size = frame_size; diff --git a/fs/ntfs3/index.c b/fs/ntfs3/index.c index cf92b2433f7a7..daabaad63aaf6 100644 --- a/fs/ntfs3/index.c +++ b/fs/ntfs3/index.c @@ -1462,7 +1462,7 @@ static int indx_create_allocate(struct ntfs_index *indx, struct ntfs_inode *ni, goto out2;
if (in->name == I30_NAME) { - ni->vfs_inode.i_size = data_size; + i_size_write(&ni->vfs_inode, data_size); inode_set_bytes(&ni->vfs_inode, alloc_size); }
@@ -1544,7 +1544,7 @@ static int indx_add_allocate(struct ntfs_index *indx, struct ntfs_inode *ni, }
if (in->name == I30_NAME) - ni->vfs_inode.i_size = data_size; + i_size_write(&ni->vfs_inode, data_size);
*vbn = bit << indx->idx2vbn_bits;
@@ -2090,7 +2090,7 @@ static int indx_shrink(struct ntfs_index *indx, struct ntfs_inode *ni, return err;
if (in->name == I30_NAME) - ni->vfs_inode.i_size = new_data; + i_size_write(&ni->vfs_inode, new_data);
bpb = bitmap_size(bit); if (bpb * 8 == nbits) @@ -2576,7 +2576,7 @@ int indx_delete_entry(struct ntfs_index *indx, struct ntfs_inode *ni, err = attr_set_size(ni, ATTR_ALLOC, in->name, in->name_len, &indx->alloc_run, 0, NULL, false, NULL); if (in->name == I30_NAME) - ni->vfs_inode.i_size = 0; + i_size_write(&ni->vfs_inode, 0);
err = ni_remove_attr(ni, ATTR_ALLOC, in->name, in->name_len, false, NULL); diff --git a/fs/ntfs3/inode.c b/fs/ntfs3/inode.c index 85452a6b1d40a..eb7a8c9fba018 100644 --- a/fs/ntfs3/inode.c +++ b/fs/ntfs3/inode.c @@ -985,7 +985,7 @@ int ntfs_write_end(struct file *file, struct address_space *mapping, loff_t pos, }
if (pos + err > inode->i_size) { - inode->i_size = pos + err; + i_size_write(inode, pos + err); dirty = true; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 1b7dd28e14c4728ae1a815605ca33ffb4ce1b309 ]
Reported-by: Robert Morris rtm@csail.mit.edu Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/fslog.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/fs/ntfs3/fslog.c b/fs/ntfs3/fslog.c index 7dbb000fc6911..855519713bf79 100644 --- a/fs/ntfs3/fslog.c +++ b/fs/ntfs3/fslog.c @@ -465,7 +465,7 @@ static inline bool is_rst_area_valid(const struct RESTART_HDR *rhdr) { const struct RESTART_AREA *ra; u16 cl, fl, ul; - u32 off, l_size, file_dat_bits, file_size_round; + u32 off, l_size, seq_bits; u16 ro = le16_to_cpu(rhdr->ra_off); u32 sys_page = le32_to_cpu(rhdr->sys_page_size);
@@ -511,13 +511,15 @@ static inline bool is_rst_area_valid(const struct RESTART_HDR *rhdr) /* Make sure the sequence number bits match the log file size. */ l_size = le64_to_cpu(ra->l_size);
- file_dat_bits = sizeof(u64) * 8 - le32_to_cpu(ra->seq_num_bits); - file_size_round = 1u << (file_dat_bits + 3); - if (file_size_round != l_size && - (file_size_round < l_size || (file_size_round / 2) > l_size)) { - return false; + seq_bits = sizeof(u64) * 8 + 3; + while (l_size) { + l_size >>= 1; + seq_bits -= 1; }
+ if (seq_bits != ra->seq_num_bits) + return false; + /* The log page data offset and record header length must be quad-aligned. */ if (!IS_ALIGNED(le16_to_cpu(ra->data_off), 8) || !IS_ALIGNED(le16_to_cpu(ra->rec_hdr_len), 8))
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit 652cfeb43d6b9aba5c7c4902bed7a7340df131fb ]
Reported-by: Robert Morris rtm@csail.mit.edu Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/record.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ntfs3/record.c b/fs/ntfs3/record.c index 7b6423584eaee..6aa3a9d44df1b 100644 --- a/fs/ntfs3/record.c +++ b/fs/ntfs3/record.c @@ -279,7 +279,7 @@ struct ATTRIB *mi_enum_attr(struct mft_inode *mi, struct ATTRIB *attr) if (t16 > asize) return NULL;
- if (t16 + le32_to_cpu(attr->res.data_size) > asize) + if (le32_to_cpu(attr->res.data_size) > asize - t16) return NULL;
t32 = sizeof(short) * attr->name_len;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Komarov almaz.alexandrovich@paragon-software.com
[ Upstream commit d68968440b1a75dee05cfac7f368f1aa139e1911 ]
Reported-by: Giovanni Santini giovannisantini93@yahoo.it Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/file.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/fs/ntfs3/file.c b/fs/ntfs3/file.c index b702543a87953..691b0c9b95ae7 100644 --- a/fs/ntfs3/file.c +++ b/fs/ntfs3/file.c @@ -1054,6 +1054,8 @@ static ssize_t ntfs_compress_write(struct kiocb *iocb, struct iov_iter *from) iocb->ki_pos += written; if (iocb->ki_pos > ni->i_valid) ni->i_valid = iocb->ki_pos; + if (iocb->ki_pos > i_size) + i_size_write(inode, iocb->ki_pos);
return written; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Edward Adam Davis eadavis@qq.com
[ Upstream commit 731ab1f9828800df871c5a7ab9ffe965317d3f15 ]
The length of name cannot exceed the space occupied by ea.
Reported-and-tested-by: syzbot+65e940cfb8f99a97aca7@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis eadavis@qq.com Signed-off-by: Konstantin Komarov almaz.alexandrovich@paragon-software.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ntfs3/xattr.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/fs/ntfs3/xattr.c b/fs/ntfs3/xattr.c index 071356d096d83..53e7d1fa036aa 100644 --- a/fs/ntfs3/xattr.c +++ b/fs/ntfs3/xattr.c @@ -219,6 +219,9 @@ static ssize_t ntfs_list_ea(struct ntfs_inode *ni, char *buffer, if (!ea->name_len) break;
+ if (ea->name_len > ea_size) + break; + if (buffer) { /* Check if we can use field ea->name */ if (off + ea_size > size)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit dd6c064cfc3fc18d871107c6f5db8837e88572e4 ]
When a station is added/reconfigured by userspace, e.g. a TDLS peer or a SoftAP client STA, rx_nss is currently not always set, so that it might be left zero. Set it up properly.
Link: https://msgid.link/20240129155354.98f148a3d654.I193a02155f557ea54dc9d0232da6... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/cfg.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index bfb06dea43c2d..b382c2e0a39a0 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1869,6 +1869,8 @@ static int sta_link_apply_parameters(struct ieee80211_local *local, sband->band); }
+ ieee80211_sta_set_rx_nss(link_sta); + return ret; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 733c498a80853acbafe284a40468b91f4d41f0b4 ]
If a driver implements the change_interface() method, we switch interface type without taking the interface down, but still will recreate the debugfs for it since it's a new type. As such, we should use the ieee80211_debugfs_recreate_netdev() function here to also recreate the driver's files, if it is indeed from a type change while up.
Link: https://msgid.link/20240129155402.7311a36ffeeb.I18df02bbeb685d4250911de5ffba... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/debugfs_netdev.c | 4 ++-- net/mac80211/debugfs_netdev.h | 5 ----- net/mac80211/iface.c | 2 +- 3 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index dce5606ed66da..68596ef78b15e 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -997,8 +997,8 @@ static void add_link_files(struct ieee80211_link_data *link, } }
-void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata, - bool mld_vif) +static void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata, + bool mld_vif) { char buf[10+IFNAMSIZ];
diff --git a/net/mac80211/debugfs_netdev.h b/net/mac80211/debugfs_netdev.h index b226b1aae88a5..a02ec0a413f61 100644 --- a/net/mac80211/debugfs_netdev.h +++ b/net/mac80211/debugfs_netdev.h @@ -11,8 +11,6 @@ #include "ieee80211_i.h"
#ifdef CONFIG_MAC80211_DEBUGFS -void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata, - bool mld_vif); void ieee80211_debugfs_remove_netdev(struct ieee80211_sub_if_data *sdata); void ieee80211_debugfs_rename_netdev(struct ieee80211_sub_if_data *sdata); void ieee80211_debugfs_recreate_netdev(struct ieee80211_sub_if_data *sdata, @@ -24,9 +22,6 @@ void ieee80211_link_debugfs_remove(struct ieee80211_link_data *link); void ieee80211_link_debugfs_drv_add(struct ieee80211_link_data *link); void ieee80211_link_debugfs_drv_remove(struct ieee80211_link_data *link); #else -static inline void ieee80211_debugfs_add_netdev( - struct ieee80211_sub_if_data *sdata, bool mld_vif) -{} static inline void ieee80211_debugfs_remove_netdev( struct ieee80211_sub_if_data *sdata) {} diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index e4e7c0b38cb6e..11c4caa4748e4 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1783,7 +1783,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, /* need to do this after the switch so vif.type is correct */ ieee80211_link_setup(&sdata->deflink);
- ieee80211_debugfs_add_netdev(sdata, false); + ieee80211_debugfs_recreate_netdev(sdata, false); }
static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 86b2dac224f963be92634a878888222e1e938f48 ]
The SMPS mode is currently re-initialized too late, since ieee80211_prep_channel() can be called again after we've already done ieee80211_setup_assoc_link(), in case there's some override of the channel configuration. Fix this.
Link: https://msgid.link/20240129195405.d6d74508be18.I0a7303b1ce4d8e5436011951ab62... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/mlme.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5a03bf1de6bb7..e5525dc174f4c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8,7 +8,7 @@ * Copyright 2007, Michael Wu flamingice@sourmilk.net * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2023 Intel Corporation + * Copyright (C) 2018 - 2024 Intel Corporation */
#include <linux/delay.h> @@ -2903,6 +2903,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
/* other links will be destroyed */ sdata->deflink.u.mgd.bss = NULL; + sdata->deflink.smps_mode = IEEE80211_SMPS_OFF;
netif_carrier_off(sdata->dev);
@@ -5030,9 +5031,6 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, if (!link) return 0;
- /* will change later if needed */ - link->smps_mode = IEEE80211_SMPS_OFF; - /* * If this fails (possibly due to channel context sharing * on incompatible channels, e.g. 80+80 and 160 sharing the @@ -7075,6 +7073,7 @@ void ieee80211_mgd_setup_link(struct ieee80211_link_data *link) link->u.mgd.p2p_noa_index = -1; link->u.mgd.conn_flags = 0; link->conf->bssid = link->u.mgd.bssid; + link->smps_mode = IEEE80211_SMPS_OFF;
wiphy_work_init(&link->u.mgd.request_smps_work, ieee80211_request_smps_mgd_work);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit c042600c17d8c490279f0ae2baee29475fe8047d ]
There's a call to drv_mgd_prepare_tx() and so there should be one to drv_mgd_complete_tx(), but on this path it's not. Add it.
Link: https://msgid.link/20240131164824.2f0922a514e1.I5aac89b93bcead88c374187d70ca... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/mlme.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e5525dc174f4c..241e615189244 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8105,6 +8105,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, req->reason_code, false); + drv_mgd_complete_tx(sdata->local, sdata, &info); return 0; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit 62a6183c13319e4d2227473a04abd104c4f56dcf ]
On the 6 GHz band, probe responses are sent as broadcast to optimise medium usage. However, without OCE configuration we weren't accepting them, which is wrong, even if wpa_s is by default enabling OCE. Accept them without the OCE config as well.
Link: https://msgid.link/20240129200907.5a89c2821897.I92e9dfa0f9b350bc7f37dd4bb380... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/scan.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-)
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 24fa06105378d..fca3f67ac0e8e 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -9,7 +9,7 @@ * Copyright 2007, Michael Wu flamingice@sourmilk.net * Copyright 2013-2015 Intel Mobile Communications GmbH * Copyright 2016-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2023 Intel Corporation + * Copyright (C) 2018-2024 Intel Corporation */
#include <linux/if_arp.h> @@ -216,14 +216,18 @@ ieee80211_bss_info_update(struct ieee80211_local *local, }
static bool ieee80211_scan_accept_presp(struct ieee80211_sub_if_data *sdata, + struct ieee80211_channel *channel, u32 scan_flags, const u8 *da) { if (!sdata) return false; - /* accept broadcast for OCE */ - if (scan_flags & NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP && - is_broadcast_ether_addr(da)) + + /* accept broadcast on 6 GHz and for OCE */ + if (is_broadcast_ether_addr(da) && + (channel->band == NL80211_BAND_6GHZ || + scan_flags & NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP)) return true; + if (scan_flags & NL80211_SCAN_FLAG_RANDOM_ADDR) return true; return ether_addr_equal(da, sdata->vif.addr); @@ -272,6 +276,12 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) wiphy_delayed_work_queue(local->hw.wiphy, &local->scan_work, 0); }
+ channel = ieee80211_get_channel_khz(local->hw.wiphy, + ieee80211_rx_status_to_khz(rx_status)); + + if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) + return; + if (ieee80211_is_probe_resp(mgmt->frame_control)) { struct cfg80211_scan_request *scan_req; struct cfg80211_sched_scan_request *sched_scan_req; @@ -289,19 +299,15 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) /* ignore ProbeResp to foreign address or non-bcast (OCE) * unless scanning with randomised address */ - if (!ieee80211_scan_accept_presp(sdata1, scan_req_flags, + if (!ieee80211_scan_accept_presp(sdata1, channel, + scan_req_flags, mgmt->da) && - !ieee80211_scan_accept_presp(sdata2, sched_scan_req_flags, + !ieee80211_scan_accept_presp(sdata2, channel, + sched_scan_req_flags, mgmt->da)) return; }
- channel = ieee80211_get_channel_khz(local->hw.wiphy, - ieee80211_rx_status_to_khz(rx_status)); - - if (!channel || channel->flags & IEEE80211_CHAN_DISABLED) - return; - bss = ieee80211_bss_info_update(local, rx_status, mgmt, skb->len, channel);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Berg benjamin.berg@intel.com
[ Upstream commit a23c0af103e184bb1252dddddda040f6641bea7b ]
mac80211 does not have proper support for EPCS currently as that would require changing the ECDA parameters if EPCS (Emergency Preparedness Communications Service) is in use. As such, do not announce support for it in the capabilities.
Signed-off-by: Benjamin Berg benjamin.berg@intel.com Signed-off-by: Miri Korenblit miriam.rachel.korenblit@intel.com Link: https://msgid.link/20240201155157.59d71656addc.Idde91b3018239c49fc6ed231b411... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index 480f8edbfd35d..678c4a071869f 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -668,7 +668,6 @@ static const struct ieee80211_sband_iftype_data iwl_he_eht_capa[] = { .has_eht = true, .eht_cap_elem = { .mac_cap_info[0] = - IEEE80211_EHT_MAC_CAP0_EPCS_PRIO_ACCESS | IEEE80211_EHT_MAC_CAP0_OM_CONTROL | IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 | IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE2 | @@ -793,7 +792,6 @@ static const struct ieee80211_sband_iftype_data iwl_he_eht_capa[] = { .has_eht = true, .eht_cap_elem = { .mac_cap_info[0] = - IEEE80211_EHT_MAC_CAP0_EPCS_PRIO_ACCESS | IEEE80211_EHT_MAC_CAP0_OM_CONTROL | IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 | IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE2, @@ -1020,8 +1018,7 @@ iwl_nvm_fixup_sband_iftd(struct iwl_trans *trans, if (CSR_HW_REV_TYPE(trans->hw_rev) == IWL_CFG_MAC_TYPE_GL && iftype_data->eht_cap.has_eht) { iftype_data->eht_cap.eht_cap_elem.mac_cap_info[0] &= - ~(IEEE80211_EHT_MAC_CAP0_EPCS_PRIO_ACCESS | - IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 | + ~(IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 | IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE2); iftype_data->eht_cap.eht_cap_elem.phy_cap_info[3] &= ~(IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO |
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Bresticker abrestic@rivosinc.com
[ Upstream commit de1034b38a346ef6be25fe8792f5d1e0684d5ff4 ]
md_size will have been narrowed if we have >= 4GB worth of pages in a soft-reserved region.
Signed-off-by: Andrew Bresticker abrestic@rivosinc.com Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/efi/arm-runtime.c | 2 +- drivers/firmware/efi/riscv-runtime.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c index 83f5bb57fa4c4..83092d93f36a6 100644 --- a/drivers/firmware/efi/arm-runtime.c +++ b/drivers/firmware/efi/arm-runtime.c @@ -107,7 +107,7 @@ static int __init arm_enable_runtime_services(void) efi_memory_desc_t *md;
for_each_efi_memory_desc(md) { - int md_size = md->num_pages << EFI_PAGE_SHIFT; + u64 md_size = md->num_pages << EFI_PAGE_SHIFT; struct resource *res;
if (!(md->attribute & EFI_MEMORY_SP)) diff --git a/drivers/firmware/efi/riscv-runtime.c b/drivers/firmware/efi/riscv-runtime.c index 09525fb5c240e..01f0f90ea4183 100644 --- a/drivers/firmware/efi/riscv-runtime.c +++ b/drivers/firmware/efi/riscv-runtime.c @@ -85,7 +85,7 @@ static int __init riscv_enable_runtime_services(void) efi_memory_desc_t *md;
for_each_efi_memory_desc(md) { - int md_size = md->num_pages << EFI_PAGE_SHIFT; + u64 md_size = md->num_pages << EFI_PAGE_SHIFT; struct resource *res;
if (!(md->attribute & EFI_MEMORY_SP))
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrew Bresticker abrestic@rivosinc.com
[ Upstream commit 0bcff59ef7a652fcdc6d535554b63278c2406c8f ]
Adding memblocks for soft-reserved regions prevents them from later being hotplugged in by dax_kmem.
Signed-off-by: Andrew Bresticker abrestic@rivosinc.com Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/efi/efi-init.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/firmware/efi/efi-init.c b/drivers/firmware/efi/efi-init.c index d4987d0130801..a00e07b853f22 100644 --- a/drivers/firmware/efi/efi-init.c +++ b/drivers/firmware/efi/efi-init.c @@ -143,15 +143,6 @@ static __init int is_usable_memory(efi_memory_desc_t *md) case EFI_BOOT_SERVICES_DATA: case EFI_CONVENTIONAL_MEMORY: case EFI_PERSISTENT_MEMORY: - /* - * Special purpose memory is 'soft reserved', which means it - * is set aside initially, but can be hotplugged back in or - * be assigned to the dax driver after boot. - */ - if (efi_soft_reserve_enabled() && - (md->attribute & EFI_MEMORY_SP)) - return false; - /* * According to the spec, these regions are no longer reserved * after calling ExitBootServices(). However, we can only use @@ -196,6 +187,16 @@ static __init void reserve_regions(void) size = npages << PAGE_SHIFT;
if (is_memory(md)) { + /* + * Special purpose memory is 'soft reserved', which + * means it is set aside initially. Don't add a memblock + * for it now so that it can be hotplugged back in or + * be assigned to the dax driver after boot. + */ + if (efi_soft_reserve_enabled() && + (md->attribute & EFI_MEMORY_SP)) + continue; + early_init_dt_add_memory_arch(paddr, size);
if (!is_usable_memory(md))
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhang Rui rui.zhang@intel.com
[ Upstream commit 34cf8c657cf0365791cdc658ddbca9cc907726ce ]
Currently, coretemp driver supports only 128 cores per package. This loses some core temperature information on systems that have more than 128 cores per package. [ 58.685033] coretemp coretemp.0: Adding Core 128 failed [ 58.692009] coretemp coretemp.0: Adding Core 129 failed ...
Enlarge the limitation to 512 because there are platforms with more than 256 cores per package.
Signed-off-by: Zhang Rui rui.zhang@intel.com Link: https://lore.kernel.org/r/20240202092144.71180-4-rui.zhang@intel.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/coretemp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 95f4c0b00b2d8..b8fc8d1ef20df 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -41,7 +41,7 @@ MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
#define PKG_SYSFS_ATTR_NO 1 /* Sysfs attribute for package temp */ #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ -#define NUM_REAL_CORES 128 /* Number of Real cores per cpu */ +#define NUM_REAL_CORES 512 /* Number of Real cores per cpu */ #define CORETEMP_NAME_LENGTH 28 /* String Length of attrs */ #define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */ #define TOTAL_ATTRS (MAX_CORE_ATTRS + 1)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Timur Tabi ttabi@nvidia.com
[ Upstream commit 34e659f34a7559ecfd9c1f5b24d4c291f3f54711 ]
Function nvkm_gsp_radix3_sg() uses nvkm_gsp_mem objects to allocate the radix3 tables, but it unnecessarily creates those objects manually instead of using the standard nvkm_gsp_mem_ctor() function like the rest of the code does.
Signed-off-by: Timur Tabi ttabi@nvidia.com Signed-off-by: Danilo Krummrich dakr@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/20240202230608.1981026-2-ttabi... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index 6208ddd929645..a41735ab60683 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -1950,20 +1950,20 @@ nvkm_gsp_radix3_dtor(struct nvkm_gsp *gsp, struct nvkm_gsp_radix3 *rx3) * See kgspCreateRadix3_IMPL */ static int -nvkm_gsp_radix3_sg(struct nvkm_device *device, struct sg_table *sgt, u64 size, +nvkm_gsp_radix3_sg(struct nvkm_gsp *gsp, struct sg_table *sgt, u64 size, struct nvkm_gsp_radix3 *rx3) { u64 addr;
for (int i = ARRAY_SIZE(rx3->mem) - 1; i >= 0; i--) { u64 *ptes; - int idx; + size_t bufsize; + int ret, idx;
- rx3->mem[i].size = ALIGN((size / GSP_PAGE_SIZE) * sizeof(u64), GSP_PAGE_SIZE); - rx3->mem[i].data = dma_alloc_coherent(device->dev, rx3->mem[i].size, - &rx3->mem[i].addr, GFP_KERNEL); - if (WARN_ON(!rx3->mem[i].data)) - return -ENOMEM; + bufsize = ALIGN((size / GSP_PAGE_SIZE) * sizeof(u64), GSP_PAGE_SIZE); + ret = nvkm_gsp_mem_ctor(gsp, bufsize, &rx3->mem[i]); + if (ret) + return ret;
ptes = rx3->mem[i].data; if (i == 2) { @@ -2003,7 +2003,7 @@ r535_gsp_fini(struct nvkm_gsp *gsp, bool suspend) if (ret) return ret;
- ret = nvkm_gsp_radix3_sg(gsp->subdev.device, &gsp->sr.sgt, len, &gsp->sr.radix3); + ret = nvkm_gsp_radix3_sg(gsp, &gsp->sr.sgt, len, &gsp->sr.radix3); if (ret) return ret;
@@ -2211,7 +2211,7 @@ r535_gsp_oneinit(struct nvkm_gsp *gsp) memcpy(gsp->sig.data, data, size);
/* Build radix3 page table for ELF image. */ - ret = nvkm_gsp_radix3_sg(device, &gsp->fw.mem.sgt, gsp->fw.len, &gsp->radix3); + ret = nvkm_gsp_radix3_sg(gsp, &gsp->fw.mem.sgt, gsp->fw.len, &gsp->radix3); if (ret) return ret;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hannes Reinecke hare@suse.de
[ Upstream commit d6c1b19153f92e95e5e1801d540e98771053afae ]
LUNs going into "failed ready running" state observed on >1T and on even numbers of size (2T, 4T, 6T, 8T and 10T). The issue occurs when DIF is enabled at the host.
The kernel logs:
Cannot setup S/G List for HBAIO segs 1/1 SGL 512 SCSI 256: 3 0
The host lpfc driver is failing to setup scatter/gather list (protection data) for the I/Os.
The return type lpfc_bg_setup_sgl()/lpfc_bg_setup_sgl_prot() causes the compiler to remove the most significant bit. Use an unsigned type instead.
Signed-off-by: Hannes Reinecke hare@suse.de [dwagner: added commit message] Signed-off-by: Daniel Wagner dwagner@suse.de Link: https://lore.kernel.org/r/20231220162658.12392-1-dwagner@suse.de Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_scsi.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index d26941b131fdb..bf879d81846b6 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1918,7 +1918,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, * * Returns the number of SGEs added to the SGL. **/ -static int +static uint32_t lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct sli4_sge *sgl, int datasegcnt, struct lpfc_io_buf *lpfc_cmd) @@ -1926,8 +1926,8 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct scatterlist *sgde = NULL; /* s/g data entry */ struct sli4_sge_diseed *diseed = NULL; dma_addr_t physaddr; - int i = 0, num_sge = 0, status; - uint32_t reftag; + int i = 0, status; + uint32_t reftag, num_sge = 0; uint8_t txop, rxop; #ifdef CONFIG_SCSI_LPFC_DEBUG_FS uint32_t rc; @@ -2099,7 +2099,7 @@ lpfc_bg_setup_sgl(struct lpfc_hba *phba, struct scsi_cmnd *sc, * * Returns the number of SGEs added to the SGL. **/ -static int +static uint32_t lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, struct sli4_sge *sgl, int datacnt, int protcnt, struct lpfc_io_buf *lpfc_cmd) @@ -2123,8 +2123,8 @@ lpfc_bg_setup_sgl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc, uint32_t rc; #endif uint32_t checking = 1; - uint32_t dma_offset = 0; - int num_sge = 0, j = 2; + uint32_t dma_offset = 0, num_sge = 0; + int j = 2; struct sli4_hybrid_sgl *sgl_xtra = NULL;
sgpe = scsi_prot_sglist(sc);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alice Chao alice.chao@mediatek.com
[ Upstream commit b513d30d59bb383a6a5d6b533afcab2cee99a8f8 ]
When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U << task_tag will out of bounds for a u32 mask. Fix this up to prevent SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type).
[name:debug_monitors&]Unexpected kernel BRK exception at EL1 [name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP [name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done [name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000 [name:mrdump&]PHYS_OFFSET: 0x80000000 [name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO) [name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288 [name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c [name:mrdump&]sp : ffffffc0081471b0 <snip> Workqueue: ufs_eh_wq_0 ufshcd_err_handler Call trace: dump_backtrace+0xf8/0x144 show_stack+0x18/0x24 dump_stack_lvl+0x78/0x9c dump_stack+0x18/0x44 mrdump_common_die+0x254/0x480 [mrdump] ipanic_die+0x20/0x30 [mrdump] notify_die+0x15c/0x204 die+0x10c/0x5f8 arm64_notify_die+0x74/0x13c do_debug_exception+0x164/0x26c el1_dbg+0x64/0x80 el1h_64_sync_handler+0x3c/0x90 el1h_64_sync+0x68/0x6c ufshcd_clear_cmd+0x280/0x288 ufshcd_wait_for_dev_cmd+0x3e4/0x82c ufshcd_exec_dev_cmd+0x5bc/0x9ac ufshcd_verify_dev_init+0x84/0x1c8 ufshcd_probe_hba+0x724/0x1ce0 ufshcd_host_reset_and_restore+0x260/0x574 ufshcd_reset_and_restore+0x138/0xbd0 ufshcd_err_handler+0x1218/0x2f28 process_one_work+0x5fc/0x1140 worker_thread+0x7d8/0xe20 kthread+0x25c/0x468 ret_from_fork+0x10/0x20
Signed-off-by: Alice Chao alice.chao@mediatek.com Link: https://lore.kernel.org/r/20240205104905.24929-1-alice.chao@mediatek.com Reviewed-by: Stanley Jhu chu.stanley@gmail.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/core/ufshcd.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 1f8d86b9c4fa0..6f7cfecacd273 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -3045,7 +3045,7 @@ bool ufshcd_cmd_inflight(struct scsi_cmnd *cmd) */ static int ufshcd_clear_cmd(struct ufs_hba *hba, u32 task_tag) { - u32 mask = 1U << task_tag; + u32 mask; unsigned long flags; int err;
@@ -3063,6 +3063,8 @@ static int ufshcd_clear_cmd(struct ufs_hba *hba, u32 task_tag) return 0; }
+ mask = 1U << task_tag; + /* clear outstanding transaction before retry */ spin_lock_irqsave(hba->host->host_lock, flags); ufshcd_utrl_clear(hba, mask);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: SEO HOYOUNG hy50.seo@samsung.com
[ Upstream commit 17e94b2585417e04dabc2f13bc03b4665ae687f3 ]
If ufshcd_err_handler() is called in a suspend/resume situation, ufs_release() can be called twice and active_reqs end up going negative. This is because ufshcd_err_handling_prepare() and ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG hy50.seo@samsung.com Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com Reviewed-by: Bart Van Assche bvanassche@acm.org Reviewed-by: Can Guo quic_cang@quicinc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/core/ufshcd.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index 6f7cfecacd273..e197b9828c3c3 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -6350,7 +6350,6 @@ static void ufshcd_err_handling_prepare(struct ufs_hba *hba) ufshcd_hold(hba); if (!ufshcd_is_clkgating_allowed(hba)) ufshcd_setup_clocks(hba, true); - ufshcd_release(hba); pm_op = hba->is_sys_suspended ? UFS_SYSTEM_PM : UFS_RUNTIME_PM; ufshcd_vops_resume(hba, pm_op); } else {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masahiro Yamada masahiroy@kernel.org
[ Upstream commit b3ff2d9c3a9c64cd0a011cdd407ffc38a6ea8788 ]
ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig.
Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Sasha Levin sashal@kernel.org --- arch/loongarch/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index ee123820a4760..709af7096acb8 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -11,6 +11,7 @@ config LOONGARCH select ARCH_DISABLE_KASAN_INLINE select ARCH_ENABLE_MEMORY_HOTPLUG select ARCH_ENABLE_MEMORY_HOTREMOVE + select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI select ARCH_HAS_CPU_FINALIZE_INIT select ARCH_HAS_FORTIFY_SOURCE @@ -643,10 +644,6 @@ config ARCH_SPARSEMEM_ENABLE or have huge holes in the physical address space for other reasons. See file:Documentation/mm/numa.rst for more.
-config ARCH_ENABLE_THP_MIGRATION - def_bool y - depends on TRANSPARENT_HUGEPAGE - config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masahiro Yamada masahiroy@kernel.org
[ Upstream commit 6b79ecd084c99b31c8b4d0beda08893716d5558e ]
LoongArch missed the refactoring made by commit 282a181b1a0d ("seccomp: Move config option SECCOMP to arch/Kconfig") because LoongArch was not mainlined at that time.
The 'depends on PROC_FS' statement is stale as described in that commit. Select HAVE_ARCH_SECCOMP, and remove the duplicated config entry.
Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Sasha Levin sashal@kernel.org --- arch/loongarch/Kconfig | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-)
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 709af7096acb8..205956041d7d0 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -98,6 +98,7 @@ config LOONGARCH select HAVE_ARCH_KFENCE select HAVE_ARCH_KGDB if PERF_EVENTS select HAVE_ARCH_MMAP_RND_BITS if MMU + select HAVE_ARCH_SECCOMP select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK select HAVE_ARCH_TRANSPARENT_HUGEPAGE @@ -609,23 +610,6 @@ config RANDOMIZE_BASE_MAX_OFFSET
This is limited by the size of the lower address memory, 256MB.
-config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - endmenu
config ARCH_SELECT_MEMORY_MODEL
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen chenhuacai@loongson.cn
[ Upstream commit 4551b30525cf3d2f026b92401ffe241eb04dfebe ]
With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS.
The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC].
With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message.
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc
Signed-off-by: Bibo Mao maobibo@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Sasha Levin sashal@kernel.org --- arch/loongarch/include/asm/acpi.h | 4 +++- arch/loongarch/kernel/acpi.c | 4 +--- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/loongarch/include/asm/acpi.h b/arch/loongarch/include/asm/acpi.h index 8de6c4b83a61a..49e29b29996f0 100644 --- a/arch/loongarch/include/asm/acpi.h +++ b/arch/loongarch/include/asm/acpi.h @@ -32,8 +32,10 @@ static inline bool acpi_has_cpu_in_madt(void) return true; }
+#define MAX_CORE_PIC 256 + extern struct list_head acpi_wakeup_device_list; -extern struct acpi_madt_core_pic acpi_core_pic[NR_CPUS]; +extern struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
extern int __init parse_acpi_topology(void);
diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c index 8e00a754e5489..55d6a48c76a82 100644 --- a/arch/loongarch/kernel/acpi.c +++ b/arch/loongarch/kernel/acpi.c @@ -29,11 +29,9 @@ int disabled_cpus;
u64 acpi_saved_sp;
-#define MAX_CORE_PIC 256 - #define PREFIX "ACPI: "
-struct acpi_madt_core_pic acpi_core_pic[NR_CPUS]; +struct acpi_madt_core_pic acpi_core_pic[MAX_CORE_PIC];
void __init __iomem * __acpi_map_table(unsigned long phys, unsigned long size) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook keescook@chromium.org
[ Upstream commit cca5efe77a6a2d02b3da4960f799fa233e460ab1 ]
The vDSO executes in userspace, so the kernel's UBSAN should not instrument it. Solves these kind of build errors:
loongarch64-linux-ld: arch/loongarch/vdso/vgettimeofday.o: in function `vdso_shift_ns': lib/vdso/gettimeofday.c:23:(.text+0x3f8): undefined reference to `__ubsan_handle_shift_out_of_bounds'
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202401310530.lZHCj1Zl-lkp@intel.com/ Cc: Huacai Chen chenhuacai@kernel.org Cc: WANG Xuerui kernel@xen0n.name Cc: Vincenzo Frascino vincenzo.frascino@arm.com Cc: Nathan Chancellor nathan@kernel.org Cc: Masahiro Yamada masahiroy@kernel.org Cc: Fangrui Song maskray@google.com Cc: loongarch@lists.linux.dev Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Sasha Levin sashal@kernel.org --- arch/loongarch/vdso/Makefile | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/loongarch/vdso/Makefile b/arch/loongarch/vdso/Makefile index c74c9921304f2..f597cd08a96be 100644 --- a/arch/loongarch/vdso/Makefile +++ b/arch/loongarch/vdso/Makefile @@ -2,6 +2,7 @@ # Objects to go into the VDSO.
KASAN_SANITIZE := n +UBSAN_SANITIZE := n KCOV_INSTRUMENT := n
# Include the generic Makefile to check the built vdso.
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wachowski, Karol karol.wachowski@intel.com
[ Upstream commit c9da9a1f17bf4fa96b115950fd389c917b583c1c ]
Set AW_SNOOP_OVERRIDE bit in VPU_37/40XX_HOST_IF_TCU_PTW_OVERRIDES to force snooping for MMU write accesses (setting event queue events).
MMU event queue buffer is the only buffer written by MMU and mapped as write-back which break cache coherency. Force write transactions to be snooped solving the problem.
Signed-off-by: Wachowski, Karol karol.wachowski@intel.com Signed-off-by: Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com Reviewed-by: Jeffrey Hugo quic_jhugo@quicinc.com Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-2-jacek... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/accel/ivpu/ivpu_hw_37xx.c | 2 +- drivers/accel/ivpu/ivpu_hw_40xx.c | 2 +- drivers/accel/ivpu/ivpu_mmu.c | 3 --- 3 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/accel/ivpu/ivpu_hw_37xx.c b/drivers/accel/ivpu/ivpu_hw_37xx.c index d530384f8d607..e658fcf849f7a 100644 --- a/drivers/accel/ivpu/ivpu_hw_37xx.c +++ b/drivers/accel/ivpu/ivpu_hw_37xx.c @@ -523,7 +523,7 @@ static void ivpu_boot_no_snoop_enable(struct ivpu_device *vdev) u32 val = REGV_RD32(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES);
val = REG_SET_FLD(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES, NOSNOOP_OVERRIDE_EN, val); - val = REG_SET_FLD(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES, AW_NOSNOOP_OVERRIDE, val); + val = REG_CLR_FLD(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES, AW_NOSNOOP_OVERRIDE, val); val = REG_SET_FLD(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES, AR_NOSNOOP_OVERRIDE, val);
REGV_WR32(VPU_37XX_HOST_IF_TCU_PTW_OVERRIDES, val); diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c b/drivers/accel/ivpu/ivpu_hw_40xx.c index e691c49c98410..8a7440bcd6df6 100644 --- a/drivers/accel/ivpu/ivpu_hw_40xx.c +++ b/drivers/accel/ivpu/ivpu_hw_40xx.c @@ -526,7 +526,7 @@ static void ivpu_boot_no_snoop_enable(struct ivpu_device *vdev) u32 val = REGV_RD32(VPU_40XX_HOST_IF_TCU_PTW_OVERRIDES);
val = REG_SET_FLD(VPU_40XX_HOST_IF_TCU_PTW_OVERRIDES, SNOOP_OVERRIDE_EN, val); - val = REG_CLR_FLD(VPU_40XX_HOST_IF_TCU_PTW_OVERRIDES, AW_SNOOP_OVERRIDE, val); + val = REG_SET_FLD(VPU_40XX_HOST_IF_TCU_PTW_OVERRIDES, AW_SNOOP_OVERRIDE, val); val = REG_CLR_FLD(VPU_40XX_HOST_IF_TCU_PTW_OVERRIDES, AR_SNOOP_OVERRIDE, val);
REGV_WR32(VPU_40XX_HOST_IF_TCU_PTW_OVERRIDES, val); diff --git a/drivers/accel/ivpu/ivpu_mmu.c b/drivers/accel/ivpu/ivpu_mmu.c index 2538c78fbebe2..9898946174fd9 100644 --- a/drivers/accel/ivpu/ivpu_mmu.c +++ b/drivers/accel/ivpu/ivpu_mmu.c @@ -533,7 +533,6 @@ static int ivpu_mmu_reset(struct ivpu_device *vdev) mmu->cmdq.cons = 0;
memset(mmu->evtq.base, 0, IVPU_MMU_EVTQ_SIZE); - clflush_cache_range(mmu->evtq.base, IVPU_MMU_EVTQ_SIZE); mmu->evtq.prod = 0; mmu->evtq.cons = 0;
@@ -847,8 +846,6 @@ static u32 *ivpu_mmu_get_event(struct ivpu_device *vdev) if (!CIRC_CNT(IVPU_MMU_Q_IDX(evtq->prod), IVPU_MMU_Q_IDX(evtq->cons), IVPU_MMU_Q_COUNT)) return NULL;
- clflush_cache_range(evt, IVPU_MMU_EVTQ_CMD_SIZE); - evtq->cons = (evtq->cons + 1) & IVPU_MMU_Q_WRAP_MASK; REGV_WR32(IVPU_MMU_REG_EVTQ_CONS_SEC, evtq->cons);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com
[ Upstream commit a7f31091ddf457352e3dd7ac183fdbd26b4dcd04 ]
NPU does not require this delay regardless of the generation. All generations are integrated into the SOC.
Signed-off-by: Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com Reviewed-by: Jeffrey Hugo quic_jhugo@quicinc.com Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-4-jacek... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/accel/ivpu/ivpu_drv.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c index 7906030176538..c856c417a1451 100644 --- a/drivers/accel/ivpu/ivpu_drv.c +++ b/drivers/accel/ivpu/ivpu_drv.c @@ -479,9 +479,8 @@ static int ivpu_pci_init(struct ivpu_device *vdev) /* Clear any pending errors */ pcie_capability_clear_word(pdev, PCI_EXP_DEVSTA, 0x3f);
- /* VPU 37XX does not require 10m D3hot delay */ - if (ivpu_hw_gen(vdev) == IVPU_HW_37XX) - pdev->d3hot_delay = 0; + /* NPU does not require 10m D3hot delay */ + pdev->d3hot_delay = 0;
ret = pcim_enable_device(pdev); if (ret) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krystian Pradzynski krystian.pradzynski@intel.com
[ Upstream commit 553099da45397914a995dce6307d6c26523c2567 ]
This parameter was never used by the 40xx FW.
Signed-off-by: Krystian Pradzynski krystian.pradzynski@intel.com Signed-off-by: Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com Reviewed-by: Jeffrey Hugo quic_jhugo@quicinc.com Link: https://patchwork.freedesktop.org/patch/msgid/20240126122804.2169129-7-jacek... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/accel/ivpu/ivpu_hw_40xx.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c b/drivers/accel/ivpu/ivpu_hw_40xx.c index 8a7440bcd6df6..a7c976256ed32 100644 --- a/drivers/accel/ivpu/ivpu_hw_40xx.c +++ b/drivers/accel/ivpu/ivpu_hw_40xx.c @@ -700,7 +700,6 @@ static int ivpu_hw_40xx_info_init(struct ivpu_device *vdev) { struct ivpu_hw_info *hw = vdev->hw; u32 tile_disable; - u32 tile_enable; u32 fuse;
fuse = REGB_RD32(VPU_40XX_BUTTRESS_TILE_FUSE); @@ -721,10 +720,6 @@ static int ivpu_hw_40xx_info_init(struct ivpu_device *vdev) else ivpu_dbg(vdev, MISC, "Fuse: All %d tiles enabled\n", TILE_MAX_NUM);
- tile_enable = (~tile_disable) & TILE_MAX_MASK; - - hw->sku = REG_SET_FLD_NUM(SKU, HW_ID, LNL_HW_ID, hw->sku); - hw->sku = REG_SET_FLD_NUM(SKU, TILE, tile_enable, hw->sku); hw->tile_fuse = tile_disable; hw->pll.profiling_freq = PLL_PROFILING_FREQ_DEFAULT;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Sakamoto o-takashi@sakamocchi.jp
[ Upstream commit 7ed4380009e96d9e9c605e12822e987b35b05648 ]
If we are bus manager and the bus has inconsistent gap counts, send a bus reset immediately instead of trying to read the root node's config ROM first. Otherwise, we could spend a lot of time trying to read the config ROM but never succeeding.
This eliminates a 50+ second delay before the FireWire bus is usable after a newly connected device is powered on in certain circumstances.
The delay occurs if a gap count inconsistency occurs, we are not the root node, and we become bus manager. One scenario that causes this is with a TI XIO2213B OHCI, the first time a Sony DSR-25 is powered on after being connected to the FireWire cable. In this configuration, the Linux box will not receive the initial PHY configuration packet sent by the DSR-25 as IRM, resulting in the DSR-25 having a gap count of 44 while the Linux box has a gap count of 63.
FireWire devices have a gap count parameter, which is set to 63 on power-up and can be changed with a PHY configuration packet. This determines the duration of the subaction and arbitration gaps. For reliable communication, all nodes on a FireWire bus must have the same gap count.
A node may have zero or more of the following roles: root node, bus manager (BM), isochronous resource manager (IRM), and cycle master. Unless a root node was forced with a PHY configuration packet, any node might become root node after a bus reset. Only the root node can become cycle master. If the root node is not cycle master capable, the BM or IRM should force a change of root node.
After a bus reset, each node sends a self-ID packet, which contains its current gap count. A single bus reset does not change the gap count, but two bus resets in a row will set the gap count to 63. Because a consistent gap count is required for reliable communication, IEEE 1394a-2000 requires that the bus manager generate a bus reset if it detects that the gap count is inconsistent.
When the gap count is inconsistent, build_tree() will notice this after the self identification process. It will set card->gap_count to the invalid value 0. If we become bus master, this will force bm_work() to send a bus reset when it performs gap count optimization.
After a bus reset, there is no bus manager. We will almost always try to become bus manager. Once we become bus manager, we will first determine whether the root node is cycle master capable. Then, we will determine if the gap count should be changed. If either the root node or the gap count should be changed, we will generate a bus reset.
To determine if the root node is cycle master capable, we read its configuration ROM. bm_work() will wait until we have finished trying to read the configuration ROM.
However, an inconsistent gap count can make this take a long time. read_config_rom() will read the first few quadlets from the config ROM. Due to the gap count inconsistency, eventually one of the reads will time out. When read_config_rom() fails, fw_device_init() calls it again until MAX_RETRIES is reached. This takes 50+ seconds.
Once we give up trying to read the configuration ROM, bm_work() will wake up, assume that the root node is not cycle master capable, and do a bus reset. Hopefully, this will resolve the gap count inconsistency.
This change makes bm_work() check for an inconsistent gap count before waiting for the root node's configuration ROM. If the gap count is inconsistent, bm_work() will immediately do a bus reset. This eliminates the 50+ second delay and rapidly brings the bus to a working state.
I considered that if the gap count is inconsistent, a PHY configuration packet might not be successful, so it could be desirable to skip the PHY configuration packet before the bus reset in this case. However, IEEE 1394a-2000 and IEEE 1394-2008 say that the bus manager may transmit a PHY configuration packet before a bus reset when correcting a gap count error. Since the standard endorses this, I decided it's safe to retain the PHY configuration packet transmission.
Normally, after a topology change, we will reset the bus a maximum of 5 times to change the root node and perform gap count optimization. However, if there is a gap count inconsistency, we must always generate a bus reset. Otherwise the gap count inconsistency will persist and communication will be unreliable. For that reason, if there is a gap count inconstency, we generate a bus reset even if we already reached the 5 reset limit.
Signed-off-by: Adam Goldman adamg@pobox.com Reference: https://sourceforge.net/p/linux1394/mailman/message/58727806/ Signed-off-by: Takashi Sakamoto o-takashi@sakamocchi.jp Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firewire/core-card.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/firewire/core-card.c b/drivers/firewire/core-card.c index 6ac5ff20a2fe2..8aaa7fcb2630d 100644 --- a/drivers/firewire/core-card.c +++ b/drivers/firewire/core-card.c @@ -429,7 +429,23 @@ static void bm_work(struct work_struct *work) */ card->bm_generation = generation;
- if (root_device == NULL) { + if (card->gap_count == 0) { + /* + * If self IDs have inconsistent gap counts, do a + * bus reset ASAP. The config rom read might never + * complete, so don't wait for it. However, still + * send a PHY configuration packet prior to the + * bus reset. The PHY configuration packet might + * fail, but 1394-2008 8.4.5.2 explicitly permits + * it in this case, so it should be safe to try. + */ + new_root_id = local_id; + /* + * We must always send a bus reset if the gap count + * is inconsistent, so bypass the 5-reset limit. + */ + card->bm_retries = 0; + } else if (root_device == NULL) { /* * Either link_on is false, or we failed to read the * config rom. In either case, pick another root.
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiubo Li xiubli@redhat.com
[ Upstream commit cd7d469c25704d414d71bf3644f163fb74e7996b ]
Once this happens that means there have bugs.
Signed-off-by: Xiubo Li xiubli@redhat.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/ceph/osd_client.h | 3 ++- net/ceph/osd_client.c | 18 +++++++++++++++--- 2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index b8610e9d2471f..5edf9fffa0973 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -45,6 +45,7 @@ enum ceph_sparse_read_state { CEPH_SPARSE_READ_HDR = 0, CEPH_SPARSE_READ_EXTENTS, CEPH_SPARSE_READ_DATA_LEN, + CEPH_SPARSE_READ_DATA_PRE, CEPH_SPARSE_READ_DATA, };
@@ -64,7 +65,7 @@ struct ceph_sparse_read { u64 sr_req_len; /* orig request length */ u64 sr_pos; /* current pos in buffer */ int sr_index; /* current extent index */ - __le32 sr_datalen; /* length of actual data */ + u32 sr_datalen; /* length of actual data */ u32 sr_count; /* extent count in reply */ int sr_ext_len; /* length of extent array */ struct ceph_sparse_extent *sr_extent; /* extent array */ diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 8d9760397b887..3babcd5e65e16 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -5856,8 +5856,8 @@ static int osd_sparse_read(struct ceph_connection *con, struct ceph_osd *o = con->private; struct ceph_sparse_read *sr = &o->o_sparse_read; u32 count = sr->sr_count; - u64 eoff, elen; - int ret; + u64 eoff, elen, len = 0; + int i, ret;
switch (sr->sr_state) { case CEPH_SPARSE_READ_HDR: @@ -5909,8 +5909,20 @@ static int osd_sparse_read(struct ceph_connection *con, convert_extent_map(sr); ret = sizeof(sr->sr_datalen); *pbuf = (char *)&sr->sr_datalen; - sr->sr_state = CEPH_SPARSE_READ_DATA; + sr->sr_state = CEPH_SPARSE_READ_DATA_PRE; break; + case CEPH_SPARSE_READ_DATA_PRE: + /* Convert sr_datalen to host-endian */ + sr->sr_datalen = le32_to_cpu((__force __le32)sr->sr_datalen); + for (i = 0; i < count; i++) + len += sr->sr_extent[i].len; + if (sr->sr_datalen != len) { + pr_warn_ratelimited("data len %u != extent len %llu\n", + sr->sr_datalen, len); + return -EREMOTEIO; + } + sr->sr_state = CEPH_SPARSE_READ_DATA; + fallthrough; case CEPH_SPARSE_READ_DATA: if (sr->sr_index >= count) { sr->sr_state = CEPH_SPARSE_READ_HDR;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xiubo Li xiubli@redhat.com
[ Upstream commit 07045648c07c5632e0dfd5ce084d3cd0cec0258a ]
The MDS will issue the 'Fr' caps for async dirop, while there is buggy in kclient and it could miss releasing the async dirop caps, which is 'Fsxr'. And then the MDS will complain with:
"[WRN] client.xxx isn't responding to mclientcaps(revoke) ..."
So when releasing the dirop async requests or when they fail we should always make sure that being revoked caps could be released.
Link: https://tracker.ceph.com/issues/50223 Signed-off-by: Xiubo Li xiubli@redhat.com Reviewed-by: Milind Changire mchangir@redhat.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/caps.c | 6 ------ fs/ceph/mds_client.c | 9 ++++----- fs/ceph/mds_client.h | 2 +- fs/ceph/super.h | 2 -- 4 files changed, 5 insertions(+), 14 deletions(-)
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index e8bf082105d87..ad1f46c66fbff 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -3216,7 +3216,6 @@ static int ceph_try_drop_cap_snap(struct ceph_inode_info *ci,
enum put_cap_refs_mode { PUT_CAP_REFS_SYNC = 0, - PUT_CAP_REFS_NO_CHECK, PUT_CAP_REFS_ASYNC, };
@@ -3332,11 +3331,6 @@ void ceph_put_cap_refs_async(struct ceph_inode_info *ci, int had) __ceph_put_cap_refs(ci, had, PUT_CAP_REFS_ASYNC); }
-void ceph_put_cap_refs_no_check_caps(struct ceph_inode_info *ci, int had) -{ - __ceph_put_cap_refs(ci, had, PUT_CAP_REFS_NO_CHECK); -} - /* * Release @nr WRBUFFER refs on dirty pages for the given @snapc snap * context. Adjust per-snap dirty page accounting as appropriate. diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 558c3af44449c..2eb66dd7d01b2 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1089,7 +1089,7 @@ void ceph_mdsc_release_request(struct kref *kref) struct ceph_mds_request *req = container_of(kref, struct ceph_mds_request, r_kref); - ceph_mdsc_release_dir_caps_no_check(req); + ceph_mdsc_release_dir_caps_async(req); destroy_reply_info(&req->r_reply_info); if (req->r_request) ceph_msg_put(req->r_request); @@ -4247,7 +4247,7 @@ void ceph_mdsc_release_dir_caps(struct ceph_mds_request *req) } }
-void ceph_mdsc_release_dir_caps_no_check(struct ceph_mds_request *req) +void ceph_mdsc_release_dir_caps_async(struct ceph_mds_request *req) { struct ceph_client *cl = req->r_mdsc->fsc->client; int dcaps; @@ -4255,8 +4255,7 @@ void ceph_mdsc_release_dir_caps_no_check(struct ceph_mds_request *req) dcaps = xchg(&req->r_dir_caps, 0); if (dcaps) { doutc(cl, "releasing r_dir_caps=%s\n", ceph_cap_string(dcaps)); - ceph_put_cap_refs_no_check_caps(ceph_inode(req->r_parent), - dcaps); + ceph_put_cap_refs_async(ceph_inode(req->r_parent), dcaps); } }
@@ -4292,7 +4291,7 @@ static void replay_unsafe_requests(struct ceph_mds_client *mdsc, if (req->r_session->s_mds != session->s_mds) continue;
- ceph_mdsc_release_dir_caps_no_check(req); + ceph_mdsc_release_dir_caps_async(req);
__send_request(session, req, true); } diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h index 2e6ddaa13d725..40560af388272 100644 --- a/fs/ceph/mds_client.h +++ b/fs/ceph/mds_client.h @@ -552,7 +552,7 @@ extern int ceph_mdsc_do_request(struct ceph_mds_client *mdsc, struct inode *dir, struct ceph_mds_request *req); extern void ceph_mdsc_release_dir_caps(struct ceph_mds_request *req); -extern void ceph_mdsc_release_dir_caps_no_check(struct ceph_mds_request *req); +extern void ceph_mdsc_release_dir_caps_async(struct ceph_mds_request *req); static inline void ceph_mdsc_get_request(struct ceph_mds_request *req) { kref_get(&req->r_kref); diff --git a/fs/ceph/super.h b/fs/ceph/super.h index fe0f64a0acb27..15d00bdd92065 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -1254,8 +1254,6 @@ extern void ceph_take_cap_refs(struct ceph_inode_info *ci, int caps, extern void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps); extern void ceph_put_cap_refs(struct ceph_inode_info *ci, int had); extern void ceph_put_cap_refs_async(struct ceph_inode_info *ci, int had); -extern void ceph_put_cap_refs_no_check_caps(struct ceph_inode_info *ci, - int had); extern void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr, struct ceph_snap_context *snapc); extern void __ceph_remove_capsnap(struct inode *inode,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Prike Liang Prike.Liang@amd.com
[ Upstream commit 93bafa32a6918154aa0caf9f66679a32c2431357 ]
In the suspend abort cases, the gfx power rail doesn't turn off so some GFXDEC registers/CSB can't reset to default value and at this moment reinitialize GFXDEC/CSB will result in an unexpected error. So let skip those program sequence for the suspend abort case.
Signed-off-by: Prike Liang Prike.Liang@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 2 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 ++ drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 8 ++++++++ 3 files changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 431d62f311531..31d4b5a2c5e83 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1041,6 +1041,8 @@ struct amdgpu_device { bool in_s3; bool in_s4; bool in_s0ix; + /* indicate amdgpu suspension status */ + bool suspend_complete;
enum pp_mp1_state mp1_state; struct amdgpu_doorbell_index doorbell_index; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index a7ad77ed09ca4..10c4a8cfa18a0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -2449,6 +2449,7 @@ static int amdgpu_pmops_suspend(struct device *dev) struct drm_device *drm_dev = dev_get_drvdata(dev); struct amdgpu_device *adev = drm_to_adev(drm_dev);
+ adev->suspend_complete = false; if (amdgpu_acpi_is_s0ix_active(adev)) adev->in_s0ix = true; else if (amdgpu_acpi_is_s3_active(adev)) @@ -2463,6 +2464,7 @@ static int amdgpu_pmops_suspend_noirq(struct device *dev) struct drm_device *drm_dev = dev_get_drvdata(dev); struct amdgpu_device *adev = drm_to_adev(drm_dev);
+ adev->suspend_complete = true; if (amdgpu_acpi_should_gpu_reset(adev)) return amdgpu_asic_reset(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 69c5009107460..3bc6943365a4f 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -3034,6 +3034,14 @@ static int gfx_v9_0_cp_gfx_start(struct amdgpu_device *adev)
gfx_v9_0_cp_gfx_enable(adev, true);
+ /* Now only limit the quirk on the APU gfx9 series and already + * confirmed that the APU gfx10/gfx11 needn't such update. + */ + if (adev->flags & AMD_IS_APU && + adev->in_s3 && !adev->suspend_complete) { + DRM_INFO(" Will skip the CSB packet resubmit\n"); + return 0; + } r = amdgpu_ring_alloc(ring, gfx_v9_0_get_csb_size(adev) + 4 + 3); if (r) { DRM_ERROR("amdgpu: cp failed to lock ring (%d).\n", r);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Prike Liang Prike.Liang@amd.com
[ Upstream commit 6ef82ac664bb9568ca3956e0d9c9c478e25077ff ]
In the s3 suspend abort case some type of gfx9 power rail not turn off from FCH side and this will put the GPU in an unknown power status, so let's reset the gpu to a known good power state before reinitialize gpu device.
Signed-off-by: Prike Liang Prike.Liang@amd.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/soc15.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c b/drivers/gpu/drm/amd/amdgpu/soc15.c index 51342809af034..9b5af3f1383a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc15.c +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c @@ -1297,10 +1297,32 @@ static int soc15_common_suspend(void *handle) return soc15_common_hw_fini(adev); }
+static bool soc15_need_reset_on_resume(struct amdgpu_device *adev) +{ + u32 sol_reg; + + sol_reg = RREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_81); + + /* Will reset for the following suspend abort cases. + * 1) Only reset limit on APU side, dGPU hasn't checked yet. + * 2) S3 suspend abort and TOS already launched. + */ + if (adev->flags & AMD_IS_APU && adev->in_s3 && + !adev->suspend_complete && + sol_reg) + return true; + + return false; +} + static int soc15_common_resume(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+ if (soc15_need_reset_on_resume(adev)) { + dev_info(adev->dev, "S3 suspend abort case, let's reset ASIC.\n"); + soc15_asic_reset(adev); + } return soc15_common_hw_init(adev); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanley.Yang Stanley.Yang@amd.com
[ Upstream commit 2dcf82a8e8dc930655787797ef8a3692b527c7a9 ]
ta if invoke node buffer |-------- ta type ----------| |-------- ta id ----------| |-------- cmd id ----------| |------ shared buf len -----| |------ shared buffer ------|
ta if invoke node buffer is as above, copy shared buffer data to correct location
Signed-off-by: Stanley.Yang Stanley.Yang@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c index 468a67b302d4c..ca5c86e5f7cd6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c @@ -362,7 +362,7 @@ static ssize_t ta_if_invoke_debugfs_write(struct file *fp, const char *buf, size } }
- if (copy_to_user((char *)buf, context->mem_context.shared_buf, shared_buf_len)) + if (copy_to_user((char *)&buf[copy_pos], context->mem_context.shared_buf, shared_buf_len)) ret = -EFAULT;
err_free_shared_buf:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lijo Lazar lijo.lazar@amd.com
[ Upstream commit 534c8a5b9d5d41d30cdcac93cfa1bca5e17be009 ]
HDP flush remapping is not done for VFs. Keep the original offsets in VF environment.
Signed-off-by: Lijo Lazar lijo.lazar@amd.com Reviewed-by: Hawking Zhang Hawking.Zhang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c index 25a3da83e0fb9..db013f86147a1 100644 --- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c +++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c @@ -431,6 +431,12 @@ static void nbio_v7_9_init_registers(struct amdgpu_device *adev) u32 inst_mask; int i;
+ if (amdgpu_sriov_vf(adev)) + adev->rmmio_remap.reg_offset = + SOC15_REG_OFFSET( + NBIO, 0, + regBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL) + << 2; WREG32_SOC15(NBIO, 0, regXCC_DOORBELL_FENCE, 0xff & ~(adev->gfx.xcc_mask));
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paulo Alcantara pc@manguebit.com
[ Upstream commit 55c7788c37242702868bfac7861cdf0c358d6c3d ]
Send query dir requests with an info level of SMB_FIND_FILE_FULL_DIRECTORY_INFO rather than SMB_FIND_FILE_DIRECTORY_INFO when the client is generating its own inode numbers (e.g. noserverino) so that reparse tags still can be parsed directly from the responses, but server won't send UniqueId (server inode number)
Signed-off-by: Paulo Alcantara pc@manguebit.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/readdir.c | 15 ++++++++------- fs/smb/client/smb2pdu.c | 6 ++++++ 2 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/fs/smb/client/readdir.c b/fs/smb/client/readdir.c index d30ea2005eb36..e23cd216bffbe 100644 --- a/fs/smb/client/readdir.c +++ b/fs/smb/client/readdir.c @@ -299,14 +299,16 @@ cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info, }
static void cifs_fulldir_info_to_fattr(struct cifs_fattr *fattr, - SEARCH_ID_FULL_DIR_INFO *info, + const void *info, struct cifs_sb_info *cifs_sb) { + const FILE_FULL_DIRECTORY_INFO *di = info; + __dir_info_to_fattr(fattr, info);
- /* See MS-FSCC 2.4.19 FileIdFullDirectoryInformation */ + /* See MS-FSCC 2.4.14, 2.4.19 */ if (fattr->cf_cifsattrs & ATTR_REPARSE) - fattr->cf_cifstag = le32_to_cpu(info->EaSize); + fattr->cf_cifstag = le32_to_cpu(di->EaSize); cifs_fill_common_info(fattr, cifs_sb); }
@@ -420,7 +422,7 @@ _initiate_cifs_search(const unsigned int xid, struct file *file, } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { cifsFile->srch_inf.info_level = SMB_FIND_FILE_ID_FULL_DIR_INFO; } else /* not srvinos - BB fixme add check for backlevel? */ { - cifsFile->srch_inf.info_level = SMB_FIND_FILE_DIRECTORY_INFO; + cifsFile->srch_inf.info_level = SMB_FIND_FILE_FULL_DIRECTORY_INFO; }
search_flags = CIFS_SEARCH_CLOSE_AT_END | CIFS_SEARCH_RETURN_RESUME; @@ -1014,10 +1016,9 @@ static int cifs_filldir(char *find_entry, struct file *file, (FIND_FILE_STANDARD_INFO *)find_entry, cifs_sb); break; + case SMB_FIND_FILE_FULL_DIRECTORY_INFO: case SMB_FIND_FILE_ID_FULL_DIR_INFO: - cifs_fulldir_info_to_fattr(&fattr, - (SEARCH_ID_FULL_DIR_INFO *)find_entry, - cifs_sb); + cifs_fulldir_info_to_fattr(&fattr, find_entry, cifs_sb); break; default: cifs_dir_info_to_fattr(&fattr, diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index 97fc2f85b429d..9d34a55fdb5e4 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -5092,6 +5092,9 @@ int SMB2_query_directory_init(const unsigned int xid, case SMB_FIND_FILE_POSIX_INFO: req->FileInformationClass = SMB_FIND_FILE_POSIX_INFO; break; + case SMB_FIND_FILE_FULL_DIRECTORY_INFO: + req->FileInformationClass = FILE_FULL_DIRECTORY_INFORMATION; + break; default: cifs_tcon_dbg(VFS, "info level %u isn't supported\n", info_level); @@ -5161,6 +5164,9 @@ smb2_parse_query_directory(struct cifs_tcon *tcon, /* note that posix payload are variable size */ info_buf_size = sizeof(struct smb2_posix_info); break; + case SMB_FIND_FILE_FULL_DIRECTORY_INFO: + info_buf_size = sizeof(FILE_FULL_DIRECTORY_INFO); + break; default: cifs_tcon_dbg(VFS, "info level %u isn't supported\n", srch_inf->info_level);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Sun yi.sun@unisoc.com
[ Upstream commit 4ce6e2db00de8103a0687fb0f65fd17124a51aaa ]
Ensure no remaining requests in virtqueues before resetting vdev and deleting virtqueues. Otherwise these requests will never be completed. It may cause the system to become unresponsive.
Function blk_mq_quiesce_queue() can ensure that requests have become in_flight status, but it cannot guarantee that requests have been processed by the device. Virtqueues should never be deleted before all requests become complete status.
Function blk_mq_freeze_queue() ensure that all requests in virtqueues become complete status. And no requests can enter in virtqueues.
Signed-off-by: Yi Sun yi.sun@unisoc.com Reviewed-by: Stefan Hajnoczi stefanha@redhat.com Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/virtio_blk.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 47556d8ccc320..2c846eed5a2af 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -1627,14 +1627,15 @@ static int virtblk_freeze(struct virtio_device *vdev) { struct virtio_blk *vblk = vdev->priv;
+ /* Ensure no requests in virtqueues before deleting vqs. */ + blk_mq_freeze_queue(vblk->disk->queue); + /* Ensure we don't receive any more interrupts */ virtio_reset_device(vdev);
/* Make sure no work handler is accessing the device. */ flush_work(&vblk->config_work);
- blk_mq_quiesce_queue(vblk->disk->queue); - vdev->config->del_vqs(vdev); kfree(vblk->vqs);
@@ -1652,7 +1653,7 @@ static int virtblk_restore(struct virtio_device *vdev)
virtio_device_ready(vdev);
- blk_mq_unquiesce_queue(vblk->disk->queue); + blk_mq_unfreeze_queue(vblk->disk->queue); return 0; } #endif
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit c6e02eefd6ace3da3369c764f15429f5647056af ]
When a tcon is marked for need_reconnect, the intention is to have it reconnected.
This change adjusts tcon->status in cifs_tree_connect when need_reconnect is set. Also, this change has a minor correction in resetting need_reconnect on success. It makes sure that it is done with tc_lock held.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/connect.c | 5 +++++ fs/smb/client/dfs.c | 7 ++++++- fs/smb/client/file.c | 3 +++ 3 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c index ea1da3ce0d401..35fe70b872b57 100644 --- a/fs/smb/client/connect.c +++ b/fs/smb/client/connect.c @@ -4225,6 +4225,11 @@ int cifs_tree_connect(const unsigned int xid, struct cifs_tcon *tcon, const stru
/* only send once per connect */ spin_lock(&tcon->tc_lock); + + /* if tcon is marked for needing reconnect, update state */ + if (tcon->need_reconnect) + tcon->status = TID_NEED_TCON; + if (tcon->status == TID_GOOD) { spin_unlock(&tcon->tc_lock); return 0; diff --git a/fs/smb/client/dfs.c b/fs/smb/client/dfs.c index a8a1d386da656..449c59830039b 100644 --- a/fs/smb/client/dfs.c +++ b/fs/smb/client/dfs.c @@ -565,6 +565,11 @@ int cifs_tree_connect(const unsigned int xid, struct cifs_tcon *tcon, const stru
/* only send once per connect */ spin_lock(&tcon->tc_lock); + + /* if tcon is marked for needing reconnect, update state */ + if (tcon->need_reconnect) + tcon->status = TID_NEED_TCON; + if (tcon->status == TID_GOOD) { spin_unlock(&tcon->tc_lock); return 0; @@ -625,8 +630,8 @@ int cifs_tree_connect(const unsigned int xid, struct cifs_tcon *tcon, const stru spin_lock(&tcon->tc_lock); if (tcon->status == TID_IN_TCON) tcon->status = TID_GOOD; - spin_unlock(&tcon->tc_lock); tcon->need_reconnect = false; + spin_unlock(&tcon->tc_lock); }
return rc; diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c index 32a8525415d96..4cbb5487bd8d0 100644 --- a/fs/smb/client/file.c +++ b/fs/smb/client/file.c @@ -175,6 +175,9 @@ cifs_mark_open_files_invalid(struct cifs_tcon *tcon)
/* only send once per connect */ spin_lock(&tcon->tc_lock); + if (tcon->need_reconnect) + tcon->status = TID_NEED_RECON; + if (tcon->status != TID_NEED_RECON) { spin_unlock(&tcon->tc_lock); return;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Prasad N sprasad@microsoft.com
[ Upstream commit a39c757bf0596b17482a507f31c3ef0af0d1d2b4 ]
Based on our implementation of multichannel, it is entirely possible that a server struct may not be found in any channel of an SMB session.
In such cases, we should be prepared to move on and search for the server struct in the next session.
Signed-off-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/connect.c | 6 ++++++ fs/smb/client/sess.c | 1 - 2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/smb/client/connect.c b/fs/smb/client/connect.c index 35fe70b872b57..c3d805ecb7f11 100644 --- a/fs/smb/client/connect.c +++ b/fs/smb/client/connect.c @@ -233,6 +233,12 @@ cifs_mark_tcp_ses_conns_for_reconnect(struct TCP_Server_Info *server, list_for_each_entry_safe(ses, nses, &pserver->smb_ses_list, smb_ses_list) { /* check if iface is still active */ spin_lock(&ses->chan_lock); + if (cifs_ses_get_chan_index(ses, server) == + CIFS_INVAL_CHAN_INDEX) { + spin_unlock(&ses->chan_lock); + continue; + } + if (!cifs_chan_is_iface_active(ses, server)) { spin_unlock(&ses->chan_lock); cifs_chan_update_iface(ses, server); diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c index 3b07f54a8567a..9415bcda1d2c6 100644 --- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -88,7 +88,6 @@ cifs_ses_get_chan_index(struct cifs_ses *ses, if (server) cifs_dbg(VFS, "unable to get chan index for server: 0x%llx", server->conn_id); - WARN_ON(1); return CIFS_INVAL_CHAN_INDEX; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French stfrench@microsoft.com
[ Upstream commit a5cc98eba2592d6e3c5a4351319595ddde2a5901 ]
When a user tries to use the "sec=krb5p" mount parameter to encrypt data on connection to a server (when authenticating with Kerberos), we indicate that it is not supported, but do not note the equivalent recommended mount parameter ("sec=krb5,seal") which turns on encryption for that mount (and uses Kerberos for auth). Update the warning message.
Reviewed-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/smb/client/fs_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c index 75f2c8734ff56..6ecbf48d0f0c6 100644 --- a/fs/smb/client/fs_context.c +++ b/fs/smb/client/fs_context.c @@ -210,7 +210,7 @@ cifs_parse_security_flavors(struct fs_context *fc, char *value, struct smb3_fs_c
switch (match_token(value, cifs_secflavor_tokens, args)) { case Opt_sec_krb5p: - cifs_errorf(fc, "sec=krb5p is not supported!\n"); + cifs_errorf(fc, "sec=krb5p is not supported. Use sec=krb5,seal instead\n"); return 1; case Opt_sec_krb5i: ctx->sign = true;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geliang Tang geliang.tang@linux.dev
[ Upstream commit d9cd27b8cd191133e287e5de107f971136abe8a2 ]
Add a new MIB counter named MPTCP_MIB_CURRESTAB to count current established MPTCP connections, similar to TCP_MIB_CURRESTAB. This is useful to quickly list the number of MPTCP connections without having to iterate over all of them.
This patch adds a new helper function mptcp_set_state(): if the state switches from or to ESTABLISHED state, this newly added counter is incremented. This helper is going to be used in the following patch.
Similar to MPTCP_INC_STATS(), a new helper called MPTCP_DEC_STATS() is also needed to decrement a MIB counter.
Signed-off-by: Geliang Tang geliang.tang@linux.dev Acked-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Matthieu Baerts matttbe@kernel.org Signed-off-by: Matthieu Baerts matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Stable-dep-of: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization") Signed-off-by: Sasha Levin sashal@kernel.org --- net/mptcp/mib.c | 1 + net/mptcp/mib.h | 8 ++++++++ net/mptcp/protocol.c | 18 ++++++++++++++++++ net/mptcp/protocol.h | 1 + 4 files changed, 28 insertions(+)
diff --git a/net/mptcp/mib.c b/net/mptcp/mib.c index a0990c365a2ea..c30405e768337 100644 --- a/net/mptcp/mib.c +++ b/net/mptcp/mib.c @@ -66,6 +66,7 @@ static const struct snmp_mib mptcp_snmp_list[] = { SNMP_MIB_ITEM("RcvWndShared", MPTCP_MIB_RCVWNDSHARED), SNMP_MIB_ITEM("RcvWndConflictUpdate", MPTCP_MIB_RCVWNDCONFLICTUPDATE), SNMP_MIB_ITEM("RcvWndConflict", MPTCP_MIB_RCVWNDCONFLICT), + SNMP_MIB_ITEM("MPCurrEstab", MPTCP_MIB_CURRESTAB), SNMP_MIB_SENTINEL };
diff --git a/net/mptcp/mib.h b/net/mptcp/mib.h index cae71d9472529..dd7fd1f246b5f 100644 --- a/net/mptcp/mib.h +++ b/net/mptcp/mib.h @@ -65,6 +65,7 @@ enum linux_mptcp_mib_field { * conflict with another subflow while updating msk rcv wnd */ MPTCP_MIB_RCVWNDCONFLICT, /* Conflict with while updating msk rcv wnd */ + MPTCP_MIB_CURRESTAB, /* Current established MPTCP connections */ __MPTCP_MIB_MAX };
@@ -95,4 +96,11 @@ static inline void __MPTCP_INC_STATS(struct net *net, __SNMP_INC_STATS(net->mib.mptcp_statistics, field); }
+static inline void MPTCP_DEC_STATS(struct net *net, + enum linux_mptcp_mib_field field) +{ + if (likely(net->mib.mptcp_statistics)) + SNMP_DEC_STATS(net->mib.mptcp_statistics, field); +} + bool mptcp_mib_alloc(struct net *net); diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 0b42ce7de45cc..a30ad00470bc7 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -2888,6 +2888,24 @@ void mptcp_subflow_shutdown(struct sock *sk, struct sock *ssk, int how) release_sock(ssk); }
+void mptcp_set_state(struct sock *sk, int state) +{ + int oldstate = sk->sk_state; + + switch (state) { + case TCP_ESTABLISHED: + if (oldstate != TCP_ESTABLISHED) + MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_CURRESTAB); + break; + + default: + if (oldstate == TCP_ESTABLISHED) + MPTCP_DEC_STATS(sock_net(sk), MPTCP_MIB_CURRESTAB); + } + + inet_sk_state_store(sk, state); +} + static const unsigned char new_state[16] = { /* current state: new state: action: */ [0 /* (Invalid) */] = TCP_CLOSE, diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index 27f3fedb9c366..0aae9acef80f7 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -641,6 +641,7 @@ bool __mptcp_close(struct sock *sk, long timeout); void mptcp_cancel_work(struct sock *sk); void __mptcp_unaccepted_force_close(struct sock *sk); void mptcp_set_owner_r(struct sk_buff *skb, struct sock *sk); +void mptcp_set_state(struct sock *sk, int state);
bool mptcp_addresses_equal(const struct mptcp_addr_info *a, const struct mptcp_addr_info *b, bool use_port);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geliang Tang geliang.tang@linux.dev
[ Upstream commit c693a8516429908da3ea111b0caa3c042ab1e6e9 ]
This patch replaces all the 'inet_sk_state_store()' calls under net/mptcp with the new helper mptcp_set_state().
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/460 Signed-off-by: Geliang Tang geliang.tang@linux.dev Acked-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Matthieu Baerts matttbe@kernel.org Signed-off-by: Matthieu Baerts matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Stable-dep-of: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization") Signed-off-by: Sasha Levin sashal@kernel.org --- net/mptcp/pm_netlink.c | 5 +++++ net/mptcp/protocol.c | 38 +++++++++++++++++++------------------- net/mptcp/subflow.c | 2 +- 3 files changed, 25 insertions(+), 20 deletions(-)
diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c index bf4d96f6f99a6..661c226dad18d 100644 --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -1048,6 +1048,11 @@ static int mptcp_pm_nl_create_listen_socket(struct sock *sk, if (err) return err;
+ /* We don't use mptcp_set_state() here because it needs to be called + * under the msk socket lock. For the moment, that will not bring + * anything more than only calling inet_sk_state_store(), because the + * old status is known (TCP_CLOSE). + */ inet_sk_state_store(newsk, TCP_LISTEN); lock_sock(ssk); err = __inet_listen_sk(ssk, backlog); diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index a30ad00470bc7..0acb1881e0b5e 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -443,11 +443,11 @@ static void mptcp_check_data_fin_ack(struct sock *sk)
switch (sk->sk_state) { case TCP_FIN_WAIT1: - inet_sk_state_store(sk, TCP_FIN_WAIT2); + mptcp_set_state(sk, TCP_FIN_WAIT2); break; case TCP_CLOSING: case TCP_LAST_ACK: - inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE); break; }
@@ -608,13 +608,13 @@ static bool mptcp_check_data_fin(struct sock *sk)
switch (sk->sk_state) { case TCP_ESTABLISHED: - inet_sk_state_store(sk, TCP_CLOSE_WAIT); + mptcp_set_state(sk, TCP_CLOSE_WAIT); break; case TCP_FIN_WAIT1: - inet_sk_state_store(sk, TCP_CLOSING); + mptcp_set_state(sk, TCP_CLOSING); break; case TCP_FIN_WAIT2: - inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE); break; default: /* Other states not expected */ @@ -789,7 +789,7 @@ static bool __mptcp_subflow_error_report(struct sock *sk, struct sock *ssk) */ ssk_state = inet_sk_state_load(ssk); if (ssk_state == TCP_CLOSE && !sock_flag(sk, SOCK_DEAD)) - inet_sk_state_store(sk, ssk_state); + mptcp_set_state(sk, ssk_state); WRITE_ONCE(sk->sk_err, -err);
/* This barrier is coupled with smp_rmb() in mptcp_poll() */ @@ -2480,7 +2480,7 @@ static void __mptcp_close_ssk(struct sock *sk, struct sock *ssk, inet_sk_state_load(msk->first) == TCP_CLOSE) { if (sk->sk_state != TCP_ESTABLISHED || msk->in_accept_queue || sock_flag(sk, SOCK_DEAD)) { - inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE); mptcp_close_wake_up(sk); } else { mptcp_start_tout_timer(sk); @@ -2575,7 +2575,7 @@ static void mptcp_check_fastclose(struct mptcp_sock *msk) WRITE_ONCE(sk->sk_err, ECONNRESET); }
- inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE); WRITE_ONCE(sk->sk_shutdown, SHUTDOWN_MASK); smp_mb__before_atomic(); /* SHUTDOWN must be visible first */ set_bit(MPTCP_WORK_CLOSE_SUBFLOW, &msk->flags); @@ -2710,7 +2710,7 @@ static void mptcp_do_fastclose(struct sock *sk) struct mptcp_subflow_context *subflow, *tmp; struct mptcp_sock *msk = mptcp_sk(sk);
- inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE); mptcp_for_each_subflow_safe(msk, subflow, tmp) __mptcp_close_ssk(sk, mptcp_subflow_tcp_sock(subflow), subflow, MPTCP_CF_FASTCLOSE); @@ -2928,7 +2928,7 @@ static int mptcp_close_state(struct sock *sk) int next = (int)new_state[sk->sk_state]; int ns = next & TCP_STATE_MASK;
- inet_sk_state_store(sk, ns); + mptcp_set_state(sk, ns);
return next & TCP_ACTION_FIN; } @@ -3039,7 +3039,7 @@ bool __mptcp_close(struct sock *sk, long timeout)
if ((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE)) { mptcp_check_listen_stop(sk); - inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE); goto cleanup; }
@@ -3082,7 +3082,7 @@ bool __mptcp_close(struct sock *sk, long timeout) * state, let's not keep resources busy for no reasons */ if (subflows_alive == 0) - inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE);
sock_hold(sk); pr_debug("msk=%p state=%d", sk, sk->sk_state); @@ -3148,7 +3148,7 @@ static int mptcp_disconnect(struct sock *sk, int flags) return -EBUSY;
mptcp_check_listen_stop(sk); - inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE);
mptcp_stop_rtx_timer(sk); mptcp_stop_tout_timer(sk); @@ -3236,7 +3236,7 @@ struct sock *mptcp_sk_clone_init(const struct sock *sk, /* this can't race with mptcp_close(), as the msk is * not yet exposted to user-space */ - inet_sk_state_store(nsk, TCP_ESTABLISHED); + mptcp_set_state(nsk, TCP_ESTABLISHED);
/* The msk maintain a ref to each subflow in the connections list */ WRITE_ONCE(msk->first, ssk); @@ -3691,7 +3691,7 @@ static int mptcp_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) if (IS_ERR(ssk)) return PTR_ERR(ssk);
- inet_sk_state_store(sk, TCP_SYN_SENT); + mptcp_set_state(sk, TCP_SYN_SENT); subflow = mptcp_subflow_ctx(ssk); #ifdef CONFIG_TCP_MD5SIG /* no MPTCP if MD5SIG is enabled on this socket or we may run out of @@ -3741,7 +3741,7 @@ static int mptcp_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len) if (unlikely(err)) { /* avoid leaving a dangling token in an unconnected socket */ mptcp_token_destroy(msk); - inet_sk_state_store(sk, TCP_CLOSE); + mptcp_set_state(sk, TCP_CLOSE); return err; }
@@ -3831,13 +3831,13 @@ static int mptcp_listen(struct socket *sock, int backlog) goto unlock; }
- inet_sk_state_store(sk, TCP_LISTEN); + mptcp_set_state(sk, TCP_LISTEN); sock_set_flag(sk, SOCK_RCU_FREE);
lock_sock(ssk); err = __inet_listen_sk(ssk, backlog); release_sock(ssk); - inet_sk_state_store(sk, inet_sk_state_load(ssk)); + mptcp_set_state(sk, inet_sk_state_load(ssk));
if (!err) { sock_prot_inuse_add(sock_net(sk), sk->sk_prot, 1); @@ -3897,7 +3897,7 @@ static int mptcp_stream_accept(struct socket *sock, struct socket *newsock, __mptcp_close_ssk(newsk, msk->first, mptcp_subflow_ctx(msk->first), 0); if (unlikely(list_is_singular(&msk->conn_list))) - inet_sk_state_store(newsk, TCP_CLOSE); + mptcp_set_state(newsk, TCP_CLOSE); } } release_sock(newsk); diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index 5155ce5b71088..56b2ac2f2f22d 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -427,7 +427,7 @@ void __mptcp_sync_state(struct sock *sk, int state) if (!msk->rcvspace_init) mptcp_rcv_space_init(msk, msk->first); if (sk->sk_state == TCP_SYN_SENT) { - inet_sk_state_store(sk, state); + mptcp_set_state(sk, state); sk->sk_state_change(sk); } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni pabeni@redhat.com
[ Upstream commit 3f83d8a77eeeb47011b990fd766a421ee64f1d73 ]
The 'msk->write_seq' and 'msk->snd_nxt' are always updated under the msk socket lock, except at MPC handshake completiont time.
Builds-up on the previous commit to move such init under the relevant lock.
There are no known problems caused by the potential race, the primary goal is consistency.
Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Stable-dep-of: e4a0fa47e816 ("mptcp: corner case locking for rx path fields initialization") Signed-off-by: Sasha Levin sashal@kernel.org --- net/mptcp/protocol.c | 6 ++---- net/mptcp/subflow.c | 13 +++++++++++-- 2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 0acb1881e0b5e..436a6164b2724 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -3530,10 +3530,8 @@ void mptcp_finish_connect(struct sock *ssk) * accessing the field below */ WRITE_ONCE(msk->local_key, subflow->local_key); - WRITE_ONCE(msk->write_seq, subflow->idsn + 1); - WRITE_ONCE(msk->snd_nxt, msk->write_seq); - WRITE_ONCE(msk->snd_una, msk->write_seq); - WRITE_ONCE(msk->wnd_end, msk->snd_nxt + tcp_sk(ssk)->snd_wnd); + WRITE_ONCE(msk->snd_una, subflow->idsn + 1); + WRITE_ONCE(msk->wnd_end, subflow->idsn + 1 + tcp_sk(ssk)->snd_wnd);
mptcp_pm_new_connection(msk, ssk, 0); } diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index 56b2ac2f2f22d..c2df34ebcf284 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -421,12 +421,21 @@ static bool subflow_use_different_dport(struct mptcp_sock *msk, const struct soc
void __mptcp_sync_state(struct sock *sk, int state) { + struct mptcp_subflow_context *subflow; struct mptcp_sock *msk = mptcp_sk(sk); + struct sock *ssk = msk->first;
- __mptcp_propagate_sndbuf(sk, msk->first); + subflow = mptcp_subflow_ctx(ssk); + __mptcp_propagate_sndbuf(sk, ssk); if (!msk->rcvspace_init) - mptcp_rcv_space_init(msk, msk->first); + mptcp_rcv_space_init(msk, ssk); + if (sk->sk_state == TCP_SYN_SENT) { + /* subflow->idsn is always available is TCP_SYN_SENT state, + * even for the FASTOPEN scenarios + */ + WRITE_ONCE(msk->write_seq, subflow->idsn + 1); + WRITE_ONCE(msk->snd_nxt, msk->write_seq); mptcp_set_state(sk, state); sk->sk_state_change(sk); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni pabeni@redhat.com
[ Upstream commit e4a0fa47e816e186f6b4c0055d07eeec42d11871 ]
Most MPTCP-level related fields are under the mptcp data lock protection, but are written one-off without such lock at MPC complete time, both for the client and the server
Leverage the mptcp_propagate_state() infrastructure to move such initialization under the proper lock client-wise.
The server side critical init steps are done by mptcp_subflow_fully_established(): ensure the caller properly held the relevant lock, and avoid acquiring the same lock in the nested scopes.
There are no real potential races, as write access to such fields is implicitly serialized by the MPTCP state machine; the primary goal is consistency.
Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/mptcp/fastopen.c | 6 ++--- net/mptcp/options.c | 9 +++---- net/mptcp/protocol.c | 9 ++++--- net/mptcp/protocol.h | 9 +++---- net/mptcp/subflow.c | 56 +++++++++++++++++++++++++------------------- 5 files changed, 50 insertions(+), 39 deletions(-)
diff --git a/net/mptcp/fastopen.c b/net/mptcp/fastopen.c index 74698582a2859..ad28da655f8bc 100644 --- a/net/mptcp/fastopen.c +++ b/net/mptcp/fastopen.c @@ -59,13 +59,12 @@ void mptcp_fastopen_subflow_synack_set_params(struct mptcp_subflow_context *subf mptcp_data_unlock(sk); }
-void mptcp_fastopen_gen_msk_ackseq(struct mptcp_sock *msk, struct mptcp_subflow_context *subflow, - const struct mptcp_options_received *mp_opt) +void __mptcp_fastopen_gen_msk_ackseq(struct mptcp_sock *msk, struct mptcp_subflow_context *subflow, + const struct mptcp_options_received *mp_opt) { struct sock *sk = (struct sock *)msk; struct sk_buff *skb;
- mptcp_data_lock(sk); skb = skb_peek_tail(&sk->sk_receive_queue); if (skb) { WARN_ON_ONCE(MPTCP_SKB_CB(skb)->end_seq); @@ -77,5 +76,4 @@ void mptcp_fastopen_gen_msk_ackseq(struct mptcp_sock *msk, struct mptcp_subflow_ }
pr_debug("msk=%p ack_seq=%llx", msk, msk->ack_seq); - mptcp_data_unlock(sk); } diff --git a/net/mptcp/options.c b/net/mptcp/options.c index d2527d189a799..e3e96a49f9229 100644 --- a/net/mptcp/options.c +++ b/net/mptcp/options.c @@ -962,9 +962,7 @@ static bool check_fully_established(struct mptcp_sock *msk, struct sock *ssk, /* subflows are fully established as soon as we get any * additional ack, including ADD_ADDR. */ - subflow->fully_established = 1; - WRITE_ONCE(msk->fully_established, true); - goto check_notify; + goto set_fully_established; }
/* If the first established packet does not contain MP_CAPABLE + data @@ -986,7 +984,10 @@ static bool check_fully_established(struct mptcp_sock *msk, struct sock *ssk, set_fully_established: if (unlikely(!READ_ONCE(msk->pm.server_side))) pr_warn_once("bogus mpc option on established client sk"); - mptcp_subflow_fully_established(subflow, mp_opt); + + mptcp_data_lock((struct sock *)msk); + __mptcp_subflow_fully_established(msk, subflow, mp_opt); + mptcp_data_unlock((struct sock *)msk);
check_notify: /* if the subflow is not already linked into the conn_list, we can't diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 436a6164b2724..fcd09afb98823 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -3200,6 +3200,7 @@ struct sock *mptcp_sk_clone_init(const struct sock *sk, { struct mptcp_subflow_request_sock *subflow_req = mptcp_subflow_rsk(req); struct sock *nsk = sk_clone_lock(sk, GFP_ATOMIC); + struct mptcp_subflow_context *subflow; struct mptcp_sock *msk;
if (!nsk) @@ -3240,7 +3241,8 @@ struct sock *mptcp_sk_clone_init(const struct sock *sk,
/* The msk maintain a ref to each subflow in the connections list */ WRITE_ONCE(msk->first, ssk); - list_add(&mptcp_subflow_ctx(ssk)->node, &msk->conn_list); + subflow = mptcp_subflow_ctx(ssk); + list_add(&subflow->node, &msk->conn_list); sock_hold(ssk);
/* new mpc subflow takes ownership of the newly @@ -3255,6 +3257,9 @@ struct sock *mptcp_sk_clone_init(const struct sock *sk, __mptcp_propagate_sndbuf(nsk, ssk);
mptcp_rcv_space_init(msk, ssk); + + if (mp_opt->suboptions & OPTION_MPTCP_MPC_ACK) + __mptcp_subflow_fully_established(msk, subflow, mp_opt); bh_unlock_sock(nsk);
/* note: the newly allocated socket refcount is 2 now */ @@ -3530,8 +3535,6 @@ void mptcp_finish_connect(struct sock *ssk) * accessing the field below */ WRITE_ONCE(msk->local_key, subflow->local_key); - WRITE_ONCE(msk->snd_una, subflow->idsn + 1); - WRITE_ONCE(msk->wnd_end, subflow->idsn + 1 + tcp_sk(ssk)->snd_wnd);
mptcp_pm_new_connection(msk, ssk, 0); } diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h index 0aae9acef80f7..8ab87d16b1b70 100644 --- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -622,8 +622,9 @@ unsigned int mptcp_stale_loss_cnt(const struct net *net); unsigned int mptcp_close_timeout(const struct sock *sk); int mptcp_get_pm_type(const struct net *net); const char *mptcp_get_scheduler(const struct net *net); -void mptcp_subflow_fully_established(struct mptcp_subflow_context *subflow, - const struct mptcp_options_received *mp_opt); +void __mptcp_subflow_fully_established(struct mptcp_sock *msk, + struct mptcp_subflow_context *subflow, + const struct mptcp_options_received *mp_opt); bool __mptcp_retransmit_pending_data(struct sock *sk); void mptcp_check_and_set_pending(struct sock *sk); void __mptcp_push_pending(struct sock *sk, unsigned int flags); @@ -952,8 +953,8 @@ void mptcp_event_pm_listener(const struct sock *ssk, enum mptcp_event_type event); bool mptcp_userspace_pm_active(const struct mptcp_sock *msk);
-void mptcp_fastopen_gen_msk_ackseq(struct mptcp_sock *msk, struct mptcp_subflow_context *subflow, - const struct mptcp_options_received *mp_opt); +void __mptcp_fastopen_gen_msk_ackseq(struct mptcp_sock *msk, struct mptcp_subflow_context *subflow, + const struct mptcp_options_received *mp_opt); void mptcp_fastopen_subflow_synack_set_params(struct mptcp_subflow_context *subflow, struct request_sock *req);
diff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c index c2df34ebcf284..c34ecadee1200 100644 --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -441,20 +441,6 @@ void __mptcp_sync_state(struct sock *sk, int state) } }
-static void mptcp_propagate_state(struct sock *sk, struct sock *ssk) -{ - struct mptcp_sock *msk = mptcp_sk(sk); - - mptcp_data_lock(sk); - if (!sock_owned_by_user(sk)) { - __mptcp_sync_state(sk, ssk->sk_state); - } else { - msk->pending_state = ssk->sk_state; - __set_bit(MPTCP_SYNC_STATE, &msk->cb_flags); - } - mptcp_data_unlock(sk); -} - static void subflow_set_remote_key(struct mptcp_sock *msk, struct mptcp_subflow_context *subflow, const struct mptcp_options_received *mp_opt) @@ -476,6 +462,31 @@ static void subflow_set_remote_key(struct mptcp_sock *msk, atomic64_set(&msk->rcv_wnd_sent, subflow->iasn); }
+static void mptcp_propagate_state(struct sock *sk, struct sock *ssk, + struct mptcp_subflow_context *subflow, + const struct mptcp_options_received *mp_opt) +{ + struct mptcp_sock *msk = mptcp_sk(sk); + + mptcp_data_lock(sk); + if (mp_opt) { + /* Options are available only in the non fallback cases + * avoid updating rx path fields otherwise + */ + WRITE_ONCE(msk->snd_una, subflow->idsn + 1); + WRITE_ONCE(msk->wnd_end, subflow->idsn + 1 + tcp_sk(ssk)->snd_wnd); + subflow_set_remote_key(msk, subflow, mp_opt); + } + + if (!sock_owned_by_user(sk)) { + __mptcp_sync_state(sk, ssk->sk_state); + } else { + msk->pending_state = ssk->sk_state; + __set_bit(MPTCP_SYNC_STATE, &msk->cb_flags); + } + mptcp_data_unlock(sk); +} + static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb) { struct mptcp_subflow_context *subflow = mptcp_subflow_ctx(sk); @@ -510,10 +521,9 @@ static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb) if (mp_opt.deny_join_id0) WRITE_ONCE(msk->pm.remote_deny_join_id0, true); subflow->mp_capable = 1; - subflow_set_remote_key(msk, subflow, &mp_opt); MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_MPCAPABLEACTIVEACK); mptcp_finish_connect(sk); - mptcp_propagate_state(parent, sk); + mptcp_propagate_state(parent, sk, subflow, &mp_opt); } else if (subflow->request_join) { u8 hmac[SHA256_DIGEST_SIZE];
@@ -556,7 +566,7 @@ static void subflow_finish_connect(struct sock *sk, const struct sk_buff *skb) } } else if (mptcp_check_fallback(sk)) { fallback: - mptcp_propagate_state(parent, sk); + mptcp_propagate_state(parent, sk, subflow, NULL); } return;
@@ -741,17 +751,16 @@ void mptcp_subflow_drop_ctx(struct sock *ssk) kfree_rcu(ctx, rcu); }
-void mptcp_subflow_fully_established(struct mptcp_subflow_context *subflow, - const struct mptcp_options_received *mp_opt) +void __mptcp_subflow_fully_established(struct mptcp_sock *msk, + struct mptcp_subflow_context *subflow, + const struct mptcp_options_received *mp_opt) { - struct mptcp_sock *msk = mptcp_sk(subflow->conn); - subflow_set_remote_key(msk, subflow, mp_opt); subflow->fully_established = 1; WRITE_ONCE(msk->fully_established, true);
if (subflow->is_mptfo) - mptcp_fastopen_gen_msk_ackseq(msk, subflow, mp_opt); + __mptcp_fastopen_gen_msk_ackseq(msk, subflow, mp_opt); }
static struct sock *subflow_syn_recv_sock(const struct sock *sk, @@ -844,7 +853,6 @@ static struct sock *subflow_syn_recv_sock(const struct sock *sk, * mpc option */ if (mp_opt.suboptions & OPTION_MPTCP_MPC_ACK) { - mptcp_subflow_fully_established(ctx, &mp_opt); mptcp_pm_fully_established(owner, child); ctx->pm_notified = 1; } @@ -1756,7 +1764,7 @@ static void subflow_state_change(struct sock *sk) mptcp_do_fallback(sk); pr_fallback(msk); subflow->conn_finished = 1; - mptcp_propagate_state(parent, sk); + mptcp_propagate_state(parent, sk, subflow, NULL); }
/* as recvmsg() does not acquire the subflow socket for ssk selection
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Meenakshikumar Somasundaram meenakshikumar.somasundaram@amd.com
[ Upstream commit 59f1622a5f05d948a7c665a458a3dd76ba73015e ]
[Why] If bandwidth allocation feature is enabled, connection manager wont limit the dp tunnel bandwidth. So, need to do display mode validation for streams on dpia links to avoid oversubscription of dp tunnel bandwidth.
[How] - To read non reduced link rate and lane count and update reported link capability. - To calculate the bandwidth required for streams of dpia links per host router and validate against the allocated bandwidth for the host router.
Tested-by: Daniel Wheeler daniel.wheeler@amd.com Reviewed-by: PeiChen Huang peichen.huang@amd.com Reviewed-by: Aric Cyr aric.cyr@amd.com Acked-by: Rodrigo Siqueira rodrigo.siqueira@amd.com Signed-off-by: Meenakshikumar Somasundaram meenakshikumar.somasundaram@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Stable-dep-of: 0484e05d048b ("drm/amd/display: fixed integer types and null check locations") Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/display/dc/core/dc_link_exports.c | 2 +- drivers/gpu/drm/amd/display/dc/dc.h | 4 +- drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 6 + drivers/gpu/drm/amd/display/dc/dc_types.h | 2 + .../dc/link/protocols/link_dp_dpia_bw.c | 130 +++++++++++++----- 5 files changed, 104 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_exports.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_exports.c index ed94187c2afa2..f365773d57148 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_exports.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_exports.c @@ -497,7 +497,7 @@ void dc_link_enable_hpd_filter(struct dc_link *link, bool enable) link->dc->link_srv->enable_hpd_filter(link, enable); }
-bool dc_link_validate(struct dc *dc, const struct dc_stream_state *streams, const unsigned int count) +bool dc_link_dp_dpia_validate(struct dc *dc, const struct dc_stream_state *streams, const unsigned int count) { return dc->link_srv->validate_dpia_bandwidth(streams, count); } diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 2cafd644baff8..8164a534048c4 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -2187,11 +2187,11 @@ int dc_link_dp_dpia_handle_usb4_bandwidth_allocation_for_link( * * @dc: pointer to dc struct * @stream: pointer to all possible streams - * @num_streams: number of valid DPIA streams + * @count: number of valid DPIA streams * * return: TRUE if bw used by DPIAs doesn't exceed available BW else return FALSE */ -bool dc_link_validate(struct dc *dc, const struct dc_stream_state *streams, +bool dc_link_dp_dpia_validate(struct dc *dc, const struct dc_stream_state *streams, const unsigned int count);
/* Sink Interfaces - A sink corresponds to a display output device */ diff --git a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h index eeeeeef4d7173..1cb7765f593aa 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_dp_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_dp_types.h @@ -1377,6 +1377,12 @@ struct dp_trace { #ifndef DP_TUNNELING_STATUS #define DP_TUNNELING_STATUS 0xE0025 /* 1.4a */ #endif +#ifndef DP_TUNNELING_MAX_LINK_RATE +#define DP_TUNNELING_MAX_LINK_RATE 0xE0028 /* 1.4a */ +#endif +#ifndef DP_TUNNELING_MAX_LANE_COUNT +#define DP_TUNNELING_MAX_LANE_COUNT 0xE0029 /* 1.4a */ +#endif #ifndef DPTX_BW_ALLOCATION_MODE_CONTROL #define DPTX_BW_ALLOCATION_MODE_CONTROL 0xE0030 /* 1.4a */ #endif diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h index 35d146217aef0..ab91504529c65 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_types.h @@ -1111,6 +1111,8 @@ struct dc_dpia_bw_alloc { int bw_granularity; // BW Granularity bool bw_alloc_enabled; // The BW Alloc Mode Support is turned ON for all 3: DP-Tx & Dpia & CM bool response_ready; // Response ready from the CM side + uint8_t nrd_max_lane_count; // Non-reduced max lane count + uint8_t nrd_max_link_rate; // Non-reduced max link rate };
#define MAX_SINKS_PER_LINK 4 diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c index d6e1f969bfd52..a7aa8c9da868f 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c @@ -59,6 +59,7 @@ static void reset_bw_alloc_struct(struct dc_link *link) link->dpia_bw_alloc_config.estimated_bw = 0; link->dpia_bw_alloc_config.bw_granularity = 0; link->dpia_bw_alloc_config.response_ready = false; + link->dpia_bw_alloc_config.sink_allocated_bw = 0; }
#define BW_GRANULARITY_0 4 // 0.25 Gbps @@ -104,6 +105,32 @@ static int get_estimated_bw(struct dc_link *link) return bw_estimated_bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity); }
+static int get_non_reduced_max_link_rate(struct dc_link *link) +{ + uint8_t nrd_max_link_rate = 0; + + core_link_read_dpcd( + link, + DP_TUNNELING_MAX_LINK_RATE, + &nrd_max_link_rate, + sizeof(uint8_t)); + + return nrd_max_link_rate; +} + +static int get_non_reduced_max_lane_count(struct dc_link *link) +{ + uint8_t nrd_max_lane_count = 0; + + core_link_read_dpcd( + link, + DP_TUNNELING_MAX_LANE_COUNT, + &nrd_max_lane_count, + sizeof(uint8_t)); + + return nrd_max_lane_count; +} + /* * Read all New BW alloc configuration ex: estimated_bw, allocated_bw, * granuality, Driver_ID, CM_Group, & populate the BW allocation structs @@ -111,13 +138,20 @@ static int get_estimated_bw(struct dc_link *link) */ static void init_usb4_bw_struct(struct dc_link *link) { - // Init the known values + reset_bw_alloc_struct(link); + + /* init the known values */ link->dpia_bw_alloc_config.bw_granularity = get_bw_granularity(link); link->dpia_bw_alloc_config.estimated_bw = get_estimated_bw(link); + link->dpia_bw_alloc_config.nrd_max_link_rate = get_non_reduced_max_link_rate(link); + link->dpia_bw_alloc_config.nrd_max_lane_count = get_non_reduced_max_lane_count(link);
DC_LOG_DEBUG("%s: bw_granularity(%d), estimated_bw(%d)\n", __func__, link->dpia_bw_alloc_config.bw_granularity, link->dpia_bw_alloc_config.estimated_bw); + DC_LOG_DEBUG("%s: nrd_max_link_rate(%d), nrd_max_lane_count(%d)\n", + __func__, link->dpia_bw_alloc_config.nrd_max_link_rate, + link->dpia_bw_alloc_config.nrd_max_lane_count); }
static uint8_t get_lowest_dpia_index(struct dc_link *link) @@ -142,39 +176,50 @@ static uint8_t get_lowest_dpia_index(struct dc_link *link) }
/* - * Get the Max Available BW or Max Estimated BW for each Host Router + * Get the maximum dp tunnel banwidth of host router * - * @link: pointer to the dc_link struct instance - * @type: ESTIMATD BW or MAX AVAILABLE BW + * @dc: pointer to the dc struct instance + * @hr_index: host router index * - * return: response_ready flag from dc_link struct + * return: host router maximum dp tunnel bandwidth */ -static int get_host_router_total_bw(struct dc_link *link, uint8_t type) +static int get_host_router_total_dp_tunnel_bw(const struct dc *dc, uint8_t hr_index) { - const struct dc *dc_struct = link->dc; - uint8_t lowest_dpia_index = get_lowest_dpia_index(link); - uint8_t idx = (link->link_index - lowest_dpia_index) / 2, idx_temp = 0; - struct dc_link *link_temp; + uint8_t lowest_dpia_index = get_lowest_dpia_index(dc->links[0]); + uint8_t hr_index_temp = 0; + struct dc_link *link_dpia_primary, *link_dpia_secondary; int total_bw = 0; - int i; - - for (i = 0; i < MAX_PIPES * 2; ++i) {
- if (!dc_struct->links[i] || dc_struct->links[i]->ep_type != DISPLAY_ENDPOINT_USB4_DPIA) - continue; + for (uint8_t i = 0; i < MAX_PIPES * 2; ++i) {
- link_temp = dc_struct->links[i]; - if (!link_temp || !link_temp->hpd_status) + if (!dc->links[i] || dc->links[i]->ep_type != DISPLAY_ENDPOINT_USB4_DPIA) continue;
- idx_temp = (link_temp->link_index - lowest_dpia_index) / 2; - - if (idx_temp == idx) { - - if (type == HOST_ROUTER_BW_ESTIMATED) - total_bw += link_temp->dpia_bw_alloc_config.estimated_bw; - else if (type == HOST_ROUTER_BW_ALLOCATED) - total_bw += link_temp->dpia_bw_alloc_config.sink_allocated_bw; + hr_index_temp = (dc->links[i]->link_index - lowest_dpia_index) / 2; + + if (hr_index_temp == hr_index) { + link_dpia_primary = dc->links[i]; + link_dpia_secondary = dc->links[i + 1]; + + /** + * If BW allocation enabled on both DPIAs, then + * HR BW = Estimated(dpia_primary) + Allocated(dpia_secondary) + * otherwise HR BW = Estimated(bw alloc enabled dpia) + */ + if ((link_dpia_primary->hpd_status && + link_dpia_primary->dpia_bw_alloc_config.bw_alloc_enabled) && + (link_dpia_secondary->hpd_status && + link_dpia_secondary->dpia_bw_alloc_config.bw_alloc_enabled)) { + total_bw += link_dpia_primary->dpia_bw_alloc_config.estimated_bw + + link_dpia_secondary->dpia_bw_alloc_config.sink_allocated_bw; + } else if (link_dpia_primary->hpd_status && + link_dpia_primary->dpia_bw_alloc_config.bw_alloc_enabled) { + total_bw = link_dpia_primary->dpia_bw_alloc_config.estimated_bw; + } else if (link_dpia_secondary->hpd_status && + link_dpia_secondary->dpia_bw_alloc_config.bw_alloc_enabled) { + total_bw += link_dpia_secondary->dpia_bw_alloc_config.estimated_bw; + } + break; } }
@@ -194,7 +239,6 @@ static void dpia_bw_alloc_unplug(struct dc_link *link) if (link) { DC_LOG_DEBUG("%s: resetting bw alloc config for link(%d)\n", __func__, link->link_index); - link->dpia_bw_alloc_config.sink_allocated_bw = 0; reset_bw_alloc_struct(link); } } @@ -397,7 +441,7 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea if (!timeout) ret = 0;// ERROR TIMEOUT waiting for response for allocating bw else if (link->dpia_bw_alloc_config.sink_allocated_bw > 0) - ret = get_host_router_total_bw(link, HOST_ROUTER_BW_ALLOCATED); + ret = link->dpia_bw_alloc_config.sink_allocated_bw; } //2. Cold Unplug else if (!link->hpd_status) @@ -439,29 +483,41 @@ bool link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int r bool dpia_validate_usb4_bw(struct dc_link **link, int *bw_needed_per_dpia, const unsigned int num_dpias) { bool ret = true; - int bw_needed_per_hr[MAX_HR_NUM] = { 0, 0 }; - uint8_t lowest_dpia_index = 0, dpia_index = 0; - uint8_t i; + int bw_needed_per_hr[MAX_HR_NUM] = { 0, 0 }, host_router_total_dp_bw = 0; + uint8_t lowest_dpia_index, i, hr_index;
if (!num_dpias || num_dpias > MAX_DPIA_NUM) return ret;
- //Get total Host Router BW & Validate against each Host Router max BW + lowest_dpia_index = get_lowest_dpia_index(link[0]); + + /* get total Host Router BW with granularity for the given modes */ for (i = 0; i < num_dpias; ++i) { + int granularity_Gbps = 0; + int bw_granularity = 0;
if (!link[i]->dpia_bw_alloc_config.bw_alloc_enabled) continue;
- lowest_dpia_index = get_lowest_dpia_index(link[i]); if (link[i]->link_index < lowest_dpia_index) continue;
- dpia_index = (link[i]->link_index - lowest_dpia_index) / 2; - bw_needed_per_hr[dpia_index] += bw_needed_per_dpia[i]; - if (bw_needed_per_hr[dpia_index] > get_host_router_total_bw(link[i], HOST_ROUTER_BW_ALLOCATED)) { + granularity_Gbps = (Kbps_TO_Gbps / link[i]->dpia_bw_alloc_config.bw_granularity); + bw_granularity = (bw_needed_per_dpia[i] / granularity_Gbps) * granularity_Gbps + + ((bw_needed_per_dpia[i] % granularity_Gbps) ? granularity_Gbps : 0);
- ret = false; - break; + hr_index = (link[i]->link_index - lowest_dpia_index) / 2; + bw_needed_per_hr[hr_index] += bw_granularity; + } + + /* validate against each Host Router max BW */ + for (hr_index = 0; hr_index < MAX_HR_NUM; ++hr_index) { + if (bw_needed_per_hr[hr_index]) { + host_router_total_dp_bw = get_host_router_total_dp_tunnel_bw(link[0]->dc, hr_index); + if (bw_needed_per_hr[hr_index] > host_router_total_dp_bw) { + ret = false; + break; + } } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peichen Huang peichen.huang@amd.com
[ Upstream commit 5f3bce13266e6fe2f7a46f94d8bc94d5274e276b ]
[WHY] When usb4 bandwidth allocation mode is enabled, driver need to request bandwidth from connection manager. For mst link, the requested bandwidth should be big enough for all remote streams.
[HOW] - If mst link, the requested bandwidth should be the sum of all mst streams bandwidth added with dp MTPH overhead. - Allocate/deallcate usb4 bandwidth when setting dpms on/off. - When doing display mode validation, driver also need to consider total bandwidth of all mst streams for mst link.
Reviewed-by: Cruise Hung cruise.hung@amd.com Acked-by: Rodrigo Siqueira rodrigo.siqueira@amd.com Signed-off-by: Peichen Huang peichen.huang@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Stable-dep-of: 0484e05d048b ("drm/amd/display: fixed integer types and null check locations") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dc_types.h | 12 ++-- .../gpu/drm/amd/display/dc/link/link_dpms.c | 42 ++++++++++--- .../drm/amd/display/dc/link/link_validation.c | 60 +++++++++++++++---- .../dc/link/protocols/link_dp_dpia_bw.c | 59 +++++++++++++----- .../dc/link/protocols/link_dp_dpia_bw.h | 9 +++ 5 files changed, 144 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dc_types.h b/drivers/gpu/drm/amd/display/dc/dc_types.h index ab91504529c65..66d0774bef527 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_types.h @@ -1100,23 +1100,25 @@ struct dc_panel_config { } ilr; };
+#define MAX_SINKS_PER_LINK 4 + /* * USB4 DPIA BW ALLOCATION STRUCTS */ struct dc_dpia_bw_alloc { - int sink_verified_bw; // The Verified BW that sink can allocated and use that has been verified already - int sink_allocated_bw; // The Actual Allocated BW that sink currently allocated - int sink_max_bw; // The Max BW that sink can require/support + int remote_sink_req_bw[MAX_SINKS_PER_LINK]; // BW requested by remote sinks + int link_verified_bw; // The Verified BW that link can allocated and use that has been verified already + int link_max_bw; // The Max BW that link can require/support + int allocated_bw; // The Actual Allocated BW for this DPIA int estimated_bw; // The estimated available BW for this DPIA int bw_granularity; // BW Granularity + int dp_overhead; // DP overhead in dp tunneling bool bw_alloc_enabled; // The BW Alloc Mode Support is turned ON for all 3: DP-Tx & Dpia & CM bool response_ready; // Response ready from the CM side uint8_t nrd_max_lane_count; // Non-reduced max lane count uint8_t nrd_max_link_rate; // Non-reduced max link rate };
-#define MAX_SINKS_PER_LINK 4 - enum dc_hpd_enable_select { HPD_EN_FOR_ALL_EDP = 0, HPD_EN_FOR_PRIMARY_EDP_ONLY, diff --git a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c index a08ae59c1ea9f..007ee32c202e8 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_dpms.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_dpms.c @@ -2098,17 +2098,11 @@ static enum dc_status enable_link_dp(struct dc_state *state, } }
- /* - * If the link is DP-over-USB4 do the following: - * - Train with fallback when enabling DPIA link. Conventional links are + /* Train with fallback when enabling DPIA link. Conventional links are * trained with fallback during sink detection. - * - Allocate only what the stream needs for bw in Gbps. Inform the CM - * in case stream needs more or less bw from what has been allocated - * earlier at plug time. */ - if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) { + if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) do_fallback = true; - }
/* * Temporary w/a to get DP2.0 link rates to work with SST. @@ -2290,6 +2284,32 @@ static enum dc_status enable_link( return status; }
+static bool allocate_usb4_bandwidth_for_stream(struct dc_stream_state *stream, int bw) +{ + return true; +} + +static bool allocate_usb4_bandwidth(struct dc_stream_state *stream) +{ + bool ret; + + int bw = dc_bandwidth_in_kbps_from_timing(&stream->timing, + dc_link_get_highest_encoding_format(stream->sink->link)); + + ret = allocate_usb4_bandwidth_for_stream(stream, bw); + + return ret; +} + +static bool deallocate_usb4_bandwidth(struct dc_stream_state *stream) +{ + bool ret; + + ret = allocate_usb4_bandwidth_for_stream(stream, 0); + + return ret; +} + void link_set_dpms_off(struct pipe_ctx *pipe_ctx) { struct dc *dc = pipe_ctx->stream->ctx->dc; @@ -2325,6 +2345,9 @@ void link_set_dpms_off(struct pipe_ctx *pipe_ctx) update_psp_stream_config(pipe_ctx, true); dc->hwss.blank_stream(pipe_ctx);
+ if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) + deallocate_usb4_bandwidth(pipe_ctx->stream); + if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) deallocate_mst_payload(pipe_ctx); else if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT && @@ -2567,6 +2590,9 @@ void link_set_dpms_on( } }
+ if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) + allocate_usb4_bandwidth(pipe_ctx->stream); + if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) allocate_mst_payload(pipe_ctx); else if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT && diff --git a/drivers/gpu/drm/amd/display/dc/link/link_validation.c b/drivers/gpu/drm/amd/display/dc/link/link_validation.c index b45fda96eaf64..8fe66c3678508 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_validation.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_validation.c @@ -346,23 +346,61 @@ enum dc_status link_validate_mode_timing( return DC_OK; }
+/* + * This function calculates the bandwidth required for the stream timing + * and aggregates the stream bandwidth for the respective dpia link + * + * @stream: pointer to the dc_stream_state struct instance + * @num_streams: number of streams to be validated + * + * return: true if validation is succeeded + */ bool link_validate_dpia_bandwidth(const struct dc_stream_state *stream, const unsigned int num_streams) { - bool ret = true; - int bw_needed[MAX_DPIA_NUM]; - struct dc_link *link[MAX_DPIA_NUM]; - - if (!num_streams || num_streams > MAX_DPIA_NUM) - return ret; + int bw_needed[MAX_DPIA_NUM] = {0}; + struct dc_link *dpia_link[MAX_DPIA_NUM] = {0}; + int num_dpias = 0;
for (uint8_t i = 0; i < num_streams; ++i) { + if (stream[i].signal == SIGNAL_TYPE_DISPLAY_PORT) { + /* new dpia sst stream, check whether it exceeds max dpia */ + if (num_dpias >= MAX_DPIA_NUM) + return false;
- link[i] = stream[i].link; - bw_needed[i] = dc_bandwidth_in_kbps_from_timing(&stream[i].timing, - dc_link_get_highest_encoding_format(link[i])); + dpia_link[num_dpias] = stream[i].link; + bw_needed[num_dpias] = dc_bandwidth_in_kbps_from_timing(&stream[i].timing, + dc_link_get_highest_encoding_format(dpia_link[num_dpias])); + num_dpias++; + } else if (stream[i].signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { + uint8_t j = 0; + /* check whether its a known dpia link */ + for (; j < num_dpias; ++j) { + if (dpia_link[j] == stream[i].link) + break; + } + + if (j == num_dpias) { + /* new dpia mst stream, check whether it exceeds max dpia */ + if (num_dpias >= MAX_DPIA_NUM) + return false; + else { + dpia_link[j] = stream[i].link; + num_dpias++; + } + } + + bw_needed[j] += dc_bandwidth_in_kbps_from_timing(&stream[i].timing, + dc_link_get_highest_encoding_format(dpia_link[j])); + } }
- ret = dpia_validate_usb4_bw(link, bw_needed, num_streams); + /* Include dp overheads */ + for (uint8_t i = 0; i < num_dpias; ++i) { + int dp_overhead = 0; + + dp_overhead = link_dp_dpia_get_dp_overhead_in_dp_tunneling(dpia_link[i]); + bw_needed[i] += dp_overhead; + }
- return ret; + return dpia_validate_usb4_bw(dpia_link, bw_needed, num_dpias); } diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c index a7aa8c9da868f..4ef1a6a1d1295 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c @@ -54,12 +54,18 @@ static bool get_bw_alloc_proceed_flag(struct dc_link *tmp) static void reset_bw_alloc_struct(struct dc_link *link) { link->dpia_bw_alloc_config.bw_alloc_enabled = false; - link->dpia_bw_alloc_config.sink_verified_bw = 0; - link->dpia_bw_alloc_config.sink_max_bw = 0; + link->dpia_bw_alloc_config.link_verified_bw = 0; + link->dpia_bw_alloc_config.link_max_bw = 0; + link->dpia_bw_alloc_config.allocated_bw = 0; link->dpia_bw_alloc_config.estimated_bw = 0; link->dpia_bw_alloc_config.bw_granularity = 0; + link->dpia_bw_alloc_config.dp_overhead = 0; link->dpia_bw_alloc_config.response_ready = false; - link->dpia_bw_alloc_config.sink_allocated_bw = 0; + link->dpia_bw_alloc_config.nrd_max_lane_count = 0; + link->dpia_bw_alloc_config.nrd_max_link_rate = 0; + for (int i = 0; i < MAX_SINKS_PER_LINK; i++) + link->dpia_bw_alloc_config.remote_sink_req_bw[i] = 0; + DC_LOG_DEBUG("reset usb4 bw alloc of link(%d)\n", link->link_index); }
#define BW_GRANULARITY_0 4 // 0.25 Gbps @@ -210,8 +216,8 @@ static int get_host_router_total_dp_tunnel_bw(const struct dc *dc, uint8_t hr_in link_dpia_primary->dpia_bw_alloc_config.bw_alloc_enabled) && (link_dpia_secondary->hpd_status && link_dpia_secondary->dpia_bw_alloc_config.bw_alloc_enabled)) { - total_bw += link_dpia_primary->dpia_bw_alloc_config.estimated_bw + - link_dpia_secondary->dpia_bw_alloc_config.sink_allocated_bw; + total_bw += link_dpia_primary->dpia_bw_alloc_config.estimated_bw + + link_dpia_secondary->dpia_bw_alloc_config.allocated_bw; } else if (link_dpia_primary->hpd_status && link_dpia_primary->dpia_bw_alloc_config.bw_alloc_enabled) { total_bw = link_dpia_primary->dpia_bw_alloc_config.estimated_bw; @@ -264,7 +270,7 @@ static void set_usb4_req_bw_req(struct dc_link *link, int req_bw)
/* Error check whether requested and allocated are equal */ req_bw = requested_bw * (Kbps_TO_Gbps / link->dpia_bw_alloc_config.bw_granularity); - if (req_bw == link->dpia_bw_alloc_config.sink_allocated_bw) { + if (req_bw == link->dpia_bw_alloc_config.allocated_bw) { DC_LOG_ERROR("%s: Request bw equals to allocated bw for link(%d)\n", __func__, link->link_index); } @@ -387,9 +393,9 @@ void dpia_handle_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t res DC_LOG_DEBUG("%s: BW REQ SUCCESS for DP-TX Request for link(%d)\n", __func__, link->link_index); DC_LOG_DEBUG("%s: current allocated_bw(%d), new allocated_bw(%d)\n", - __func__, link->dpia_bw_alloc_config.sink_allocated_bw, bw_needed); + __func__, link->dpia_bw_alloc_config.allocated_bw, bw_needed);
- link->dpia_bw_alloc_config.sink_allocated_bw = bw_needed; + link->dpia_bw_alloc_config.allocated_bw = bw_needed;
link->dpia_bw_alloc_config.response_ready = true; break; @@ -427,8 +433,8 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea if (link->hpd_status && peak_bw > 0) {
// If DP over USB4 then we need to check BW allocation - link->dpia_bw_alloc_config.sink_max_bw = peak_bw; - set_usb4_req_bw_req(link, link->dpia_bw_alloc_config.sink_max_bw); + link->dpia_bw_alloc_config.link_max_bw = peak_bw; + set_usb4_req_bw_req(link, link->dpia_bw_alloc_config.link_max_bw);
do { if (timeout > 0) @@ -440,8 +446,8 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea
if (!timeout) ret = 0;// ERROR TIMEOUT waiting for response for allocating bw - else if (link->dpia_bw_alloc_config.sink_allocated_bw > 0) - ret = link->dpia_bw_alloc_config.sink_allocated_bw; + else if (link->dpia_bw_alloc_config.allocated_bw > 0) + ret = link->dpia_bw_alloc_config.allocated_bw; } //2. Cold Unplug else if (!link->hpd_status) @@ -450,7 +456,6 @@ int dpia_handle_usb4_bandwidth_allocation_for_link(struct dc_link *link, int pea out: return ret; } - bool link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int req_bw) { bool ret = false; @@ -458,7 +463,7 @@ bool link_dp_dpia_allocate_usb4_bandwidth_for_stream(struct dc_link *link, int r
DC_LOG_DEBUG("%s: ENTER: link(%d), hpd_status(%d), current allocated_bw(%d), req_bw(%d)\n", __func__, link->link_index, link->hpd_status, - link->dpia_bw_alloc_config.sink_allocated_bw, req_bw); + link->dpia_bw_alloc_config.allocated_bw, req_bw);
if (!get_bw_alloc_proceed_flag(link)) goto out; @@ -523,3 +528,29 @@ bool dpia_validate_usb4_bw(struct dc_link **link, int *bw_needed_per_dpia, const
return ret; } + +int link_dp_dpia_get_dp_overhead_in_dp_tunneling(struct dc_link *link) +{ + int dp_overhead = 0, link_mst_overhead = 0; + + if (!get_bw_alloc_proceed_flag((link))) + return dp_overhead; + + /* if its mst link, add MTPH overhead */ + if ((link->type == dc_connection_mst_branch) && + !link->dpcd_caps.channel_coding_cap.bits.DP_128b_132b_SUPPORTED) { + /* For 8b/10b encoding: MTP is 64 time slots long, slot 0 is used for MTPH + * MST overhead is 1/64 of link bandwidth (excluding any overhead) + */ + const struct dc_link_settings *link_cap = + dc_link_get_link_cap(link); + uint32_t link_bw_in_kbps = + link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8; + link_mst_overhead = (link_bw_in_kbps / 64) + ((link_bw_in_kbps % 64) ? 1 : 0); + } + + /* add all the overheads */ + dp_overhead = link_mst_overhead; + + return dp_overhead; +} diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h index 981bc4eb6120e..3b6d8494f9d5d 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.h @@ -99,4 +99,13 @@ void dpia_handle_bw_alloc_response(struct dc_link *link, uint8_t bw, uint8_t res */ bool dpia_validate_usb4_bw(struct dc_link **link, int *bw_needed, const unsigned int num_dpias);
+/* + * Obtain all the DP overheads in dp tunneling for the dpia link + * + * @link: pointer to the dc_link struct instance + * + * return: DP overheads in DP tunneling + */ +int link_dp_dpia_get_dp_overhead_in_dp_tunneling(struct dc_link *link); + #endif /* DC_INC_LINK_DP_DPIA_BW_H_ */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sohaib Nadeem sohaib.nadeem@amd.com
[ Upstream commit 0484e05d048b66d01d1f3c1d2306010bb57d8738 ]
[why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null check
Cc: Mario Limonciello mario.limonciello@amd.com Cc: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic josip.pavic@amd.com Acked-by: Aurabindo Pillai aurabindo.pillai@amd.com Signed-off-by: Sohaib Nadeem sohaib.nadeem@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/display/dc/bios/bios_parser2.c | 16 ++++++++++------ .../drm/amd/display/dc/link/link_validation.c | 2 +- 2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c index b5b29451d2db8..bc7a375f43c0c 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c @@ -1850,19 +1850,21 @@ static enum bp_result get_firmware_info_v3_2( /* Vega12 */ smu_info_v3_2 = GET_IMAGE(struct atom_smu_info_v3_2, DATA_TABLES(smu_info)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_2->gpuclk_ss_percentage); if (!smu_info_v3_2) return BP_RESULT_BADBIOSTABLE;
+ DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_2->gpuclk_ss_percentage); + info->default_engine_clk = smu_info_v3_2->bootup_dcefclk_10khz * 10; } else if (revision.minor == 3) { /* Vega20 */ smu_info_v3_3 = GET_IMAGE(struct atom_smu_info_v3_3, DATA_TABLES(smu_info)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_3->gpuclk_ss_percentage); if (!smu_info_v3_3) return BP_RESULT_BADBIOSTABLE;
+ DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_3->gpuclk_ss_percentage); + info->default_engine_clk = smu_info_v3_3->bootup_dcefclk_10khz * 10; }
@@ -2423,10 +2425,11 @@ static enum bp_result get_integrated_info_v11( info_v11 = GET_IMAGE(struct atom_integrated_system_info_v1_11, DATA_TABLES(integratedsysteminfo));
- DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v11->gpuclk_ss_percentage); if (info_v11 == NULL) return BP_RESULT_BADBIOSTABLE;
+ DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v11->gpuclk_ss_percentage); + info->gpu_cap_info = le32_to_cpu(info_v11->gpucapinfo); /* @@ -2638,11 +2641,12 @@ static enum bp_result get_integrated_info_v2_1(
info_v2_1 = GET_IMAGE(struct atom_integrated_system_info_v2_1, DATA_TABLES(integratedsysteminfo)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_1->gpuclk_ss_percentage);
if (info_v2_1 == NULL) return BP_RESULT_BADBIOSTABLE;
+ DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_1->gpuclk_ss_percentage); + info->gpu_cap_info = le32_to_cpu(info_v2_1->gpucapinfo); /* @@ -2800,11 +2804,11 @@ static enum bp_result get_integrated_info_v2_2( info_v2_2 = GET_IMAGE(struct atom_integrated_system_info_v2_2, DATA_TABLES(integratedsysteminfo));
- DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_2->gpuclk_ss_percentage); - if (info_v2_2 == NULL) return BP_RESULT_BADBIOSTABLE;
+ DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_2->gpuclk_ss_percentage); + info->gpu_cap_info = le32_to_cpu(info_v2_2->gpucapinfo); /* diff --git a/drivers/gpu/drm/amd/display/dc/link/link_validation.c b/drivers/gpu/drm/amd/display/dc/link/link_validation.c index 8fe66c3678508..5b0bc7f6a188c 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_validation.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_validation.c @@ -361,7 +361,7 @@ bool link_validate_dpia_bandwidth(const struct dc_stream_state *stream, const un struct dc_link *dpia_link[MAX_DPIA_NUM] = {0}; int num_dpias = 0;
- for (uint8_t i = 0; i < num_streams; ++i) { + for (unsigned int i = 0; i < num_streams; ++i) { if (stream[i].signal == SIGNAL_TYPE_DISPLAY_PORT) { /* new dpia sst stream, check whether it exceeds max dpia */ if (num_dpias >= MAX_DPIA_NUM)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Vacek neelx@redhat.com
commit e6f57c6881916df39db7d95981a8ad2b9c3458d6 upstream.
Unfortunately the commit `fd8958efe877` introduced another error causing the `descs` array to overflow. This reults in further crashes easily reproducible by `sendmsg` system call.
[ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI [ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1] -- [ 1080.974535] Call Trace: [ 1080.976990] <TASK> [ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1] [ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1] [ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1] [ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib] [ 1081.046978] dev_hard_start_xmit+0xc4/0x210 -- [ 1081.148347] __sys_sendmsg+0x59/0xa0
crash> ipoib_txreq 0xffff9cfeba229f00 struct ipoib_txreq { txreq = { list = { next = 0xffff9cfeba229f00, prev = 0xffff9cfeba229f00 }, descp = 0xffff9cfeba229f40, coalesce_buf = 0x0, wait = 0xffff9cfea4e69a48, complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>, packet_len = 0x46d, tlen = 0x0, num_desc = 0x0, desc_limit = 0x6, next_descq_idx = 0x45c, coalesce_idx = 0x0, flags = 0x0, descs = {{ qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63) }, { qw = { 0x3800014231b108, 0x4} }, { qw = { 0x310000e4ee0fcf0, 0x8} }, { qw = { 0x3000012e9f8000, 0x8} }, { qw = { 0x59000dfb9d0000, 0x8} }, { qw = { 0x78000e02e40000, 0x8} }} }, sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62) complete = 0x0, priv = 0x0, txq = 0xffff9cfea4e69880, skb = 0xffff9d099809f400 }
If an SDMA send consists of exactly 6 descriptors and requires dword padding (in the 7th descriptor), the sdma_txreq descriptor array is not properly expanded and the packet will overflow into the container structure. This results in a panic when the send completion runs. The exact panic varies depending on what elements of the container structure get corrupted. The fix is to use the correct expression in _pad_sdma_tx_descs() to test the need to expand the descriptor array.
With this patch the crashes are no longer reproducible and the machine is stable.
Fixes: fd8958efe877 ("IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors") Cc: stable@vger.kernel.org Reported-by: Mats Kronberg kronberg@nsc.liu.se Tested-by: Mats Kronberg kronberg@nsc.liu.se Signed-off-by: Daniel Vacek neelx@redhat.com Link: https://lore.kernel.org/r/20240201081009.1109442-1-neelx@redhat.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/infiniband/hw/hfi1/sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/infiniband/hw/hfi1/sdma.c +++ b/drivers/infiniband/hw/hfi1/sdma.c @@ -3158,7 +3158,7 @@ int _pad_sdma_tx_descs(struct hfi1_devda { int rval = 0;
- if ((unlikely(tx->num_desc + 1 == tx->desc_limit))) { + if ((unlikely(tx->num_desc == tx->desc_limit))) { rval = _extend_sdma_tx_descs(dd, tx); if (rval) { __sdma_txclean(dd, tx);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Gow davidgow@google.com
commit 56778b49c9a2cbc32c6b0fbd3ba1a9d64192d3af upstream.
KUnit's deferred action API accepts a void(*)(void *) function pointer which is called when the test is exited. However, we very frequently want to use existing functions which accept a single pointer, but which may not be of type void*. While this is probably dodgy enough to be on the wrong side of the C standard, it's been often used for similar callbacks, and gcc's -Wcast-function-type seems to ignore cases where the only difference is the type of the argument, assuming it's compatible (i.e., they're both pointers to data).
However, clang 16 has introduced -Wcast-function-type-strict, which no longer permits any deviation in function pointer type. This seems to be because it'd break CFI, which validates the type of function calls.
This rather ruins our attempts to cast functions to defer them, and leaves us with a few options. The one we've chosen is to implement a macro which will generate a wrapper function which accepts a void*, and casts the argument to the appropriate type.
For example, if you were trying to wrap: void foo_close(struct foo *handle); you could use: KUNIT_DEFINE_ACTION_WRAPPER(kunit_action_foo_close, foo_close, struct foo *);
This would create a new kunit_action_foo_close() function, of type kunit_action_t, which could be passed into kunit_add_action() and similar functions.
In addition to defining this macro, update KUnit and its tests to use it.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Nathan Chancellor nathan@kernel.org Tested-by: Nathan Chancellor nathan@kernel.org Acked-by: Daniel Vetter daniel@ffwll.ch Reviewed-by: Maxime Ripard mripard@kernel.org Signed-off-by: David Gow davidgow@google.com Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/dev-tools/kunit/usage.rst | 10 +++++++--- include/kunit/resource.h | 21 +++++++++++++++++++++ lib/kunit/kunit-test.c | 5 +---- lib/kunit/test.c | 6 ++++-- 4 files changed, 33 insertions(+), 9 deletions(-)
--- a/Documentation/dev-tools/kunit/usage.rst +++ b/Documentation/dev-tools/kunit/usage.rst @@ -651,12 +651,16 @@ For example: }
Note that, for functions like device_unregister which only accept a single -pointer-sized argument, it's possible to directly cast that function to -a ``kunit_action_t`` rather than writing a wrapper function, for example: +pointer-sized argument, it's possible to automatically generate a wrapper +with the ``KUNIT_DEFINE_ACTION_WRAPPER()`` macro, for example:
.. code-block:: C
- kunit_add_action(test, (kunit_action_t *)&device_unregister, &dev); + KUNIT_DEFINE_ACTION_WRAPPER(device_unregister, device_unregister_wrapper, struct device *); + kunit_add_action(test, &device_unregister_wrapper, &dev); + +You should do this in preference to manually casting to the ``kunit_action_t`` type, +as casting function pointers will break Control Flow Integrity (CFI).
``kunit_add_action`` can fail if, for example, the system is out of memory. You can use ``kunit_add_action_or_reset`` instead which runs the action --- a/include/kunit/resource.h +++ b/include/kunit/resource.h @@ -391,6 +391,27 @@ void kunit_remove_resource(struct kunit typedef void (kunit_action_t)(void *);
/** + * KUNIT_DEFINE_ACTION_WRAPPER() - Wrap a function for use as a deferred action. + * + * @wrapper: The name of the new wrapper function define. + * @orig: The original function to wrap. + * @arg_type: The type of the argument accepted by @orig. + * + * Defines a wrapper for a function which accepts a single, pointer-sized + * argument. This wrapper can then be passed to kunit_add_action() and + * similar. This should be used in preference to casting a function + * directly to kunit_action_t, as casting function pointers will break + * control flow integrity (CFI), leading to crashes. + */ +#define KUNIT_DEFINE_ACTION_WRAPPER(wrapper, orig, arg_type) \ + static void wrapper(void *in) \ + { \ + arg_type arg = (arg_type)in; \ + orig(arg); \ + } + + +/** * kunit_add_action() - Call a function when the test ends. * @test: Test case to associate the action with. * @action: The function to run on test exit --- a/lib/kunit/kunit-test.c +++ b/lib/kunit/kunit-test.c @@ -538,10 +538,7 @@ static struct kunit_suite kunit_resource #if IS_BUILTIN(CONFIG_KUNIT_TEST)
/* This avoids a cast warning if kfree() is passed direct to kunit_add_action(). */ -static void kfree_wrapper(void *p) -{ - kfree(p); -} +KUNIT_DEFINE_ACTION_WRAPPER(kfree_wrapper, kfree, const void *);
static void kunit_log_test(struct kunit *test) { --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -819,6 +819,8 @@ static struct notifier_block kunit_mod_n }; #endif
+KUNIT_DEFINE_ACTION_WRAPPER(kfree_action_wrapper, kfree, const void *) + void *kunit_kmalloc_array(struct kunit *test, size_t n, size_t size, gfp_t gfp) { void *data; @@ -828,7 +830,7 @@ void *kunit_kmalloc_array(struct kunit * if (!data) return NULL;
- if (kunit_add_action_or_reset(test, (kunit_action_t *)kfree, data) != 0) + if (kunit_add_action_or_reset(test, kfree_action_wrapper, data) != 0) return NULL;
return data; @@ -840,7 +842,7 @@ void kunit_kfree(struct kunit *test, con if (!ptr) return;
- kunit_release_action(test, (kunit_action_t *)kfree, (void *)ptr); + kunit_release_action(test, kfree_action_wrapper, (void *)ptr); } EXPORT_SYMBOL_GPL(kunit_kfree);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pawan Gupta pawan.kumar.gupta@linux.intel.com
commit baf8361e54550a48a7087b603313ad013cc13386 upstream.
MDS mitigation requires clearing the CPU buffers before returning to user. This needs to be done late in the exit-to-user path. Current location of VERW leaves a possibility of kernel data ending up in CPU buffers for memory accesses done after VERW such as:
1. Kernel data accessed by an NMI between VERW and return-to-user can remain in CPU buffers since NMI returning to kernel does not execute VERW to clear CPU buffers. 2. Alyssa reported that after VERW is executed, CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system call. Memory accesses during stack scrubbing can move kernel stack contents into CPU buffers. 3. When caller saved registers are restored after a return from function executing VERW, the kernel stack accesses can remain in CPU buffers(since they occur after VERW).
To fix this VERW needs to be moved very late in exit-to-user path.
In preparation for moving VERW to entry/exit asm code, create macros that can be used in asm. Also make VERW patching depend on a new feature flag X86_FEATURE_CLEAR_CPU_BUF.
Reported-by: Alyssa Milburn alyssa.milburn@intel.com Suggested-by: Andrew Cooper andrew.cooper3@citrix.com Suggested-by: Peter Zijlstra peterz@infradead.org Signed-off-by: Pawan Gupta pawan.kumar.gupta@linux.intel.com Signed-off-by: Dave Hansen dave.hansen@linux.intel.com Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.in... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/entry/entry.S | 23 +++++++++++++++++++++++ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/include/asm/nospec-branch.h | 13 +++++++++++++ 3 files changed, 37 insertions(+), 1 deletion(-)
--- a/arch/x86/entry/entry.S +++ b/arch/x86/entry/entry.S @@ -6,6 +6,9 @@ #include <linux/export.h> #include <linux/linkage.h> #include <asm/msr-index.h> +#include <asm/unwind_hints.h> +#include <asm/segment.h> +#include <asm/cache.h>
.pushsection .noinstr.text, "ax"
@@ -20,3 +23,23 @@ SYM_FUNC_END(entry_ibpb) EXPORT_SYMBOL_GPL(entry_ibpb);
.popsection + +/* + * Define the VERW operand that is disguised as entry code so that + * it can be referenced with KPTI enabled. This ensure VERW can be + * used late in exit-to-user path after page tables are switched. + */ +.pushsection .entry.text, "ax" + +.align L1_CACHE_BYTES, 0xcc +SYM_CODE_START_NOALIGN(mds_verw_sel) + UNWIND_HINT_UNDEFINED + ANNOTATE_NOENDBR + .word __KERNEL_DS +.align L1_CACHE_BYTES, 0xcc +SYM_CODE_END(mds_verw_sel); +/* For KVM */ +EXPORT_SYMBOL_GPL(mds_verw_sel); + +.popsection + --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -97,7 +97,7 @@ #define X86_FEATURE_SYSENTER32 ( 3*32+15) /* "" sysenter in IA32 userspace */ #define X86_FEATURE_REP_GOOD ( 3*32+16) /* REP microcode works well */ #define X86_FEATURE_AMD_LBR_V2 ( 3*32+17) /* AMD Last Branch Record Extension Version 2 */ -/* FREE, was #define X86_FEATURE_LFENCE_RDTSC ( 3*32+18) "" LFENCE synchronizes RDTSC */ +#define X86_FEATURE_CLEAR_CPU_BUF ( 3*32+18) /* "" Clear CPU buffers using VERW */ #define X86_FEATURE_ACC_POWER ( 3*32+19) /* AMD Accumulated Power Mechanism */ #define X86_FEATURE_NOPL ( 3*32+20) /* The NOPL (0F 1F) instructions */ #define X86_FEATURE_ALWAYS ( 3*32+21) /* "" Always-present feature */ --- a/arch/x86/include/asm/nospec-branch.h +++ b/arch/x86/include/asm/nospec-branch.h @@ -315,6 +315,17 @@ #endif .endm
+/* + * Macro to execute VERW instruction that mitigate transient data sampling + * attacks such as MDS. On affected systems a microcode update overloaded VERW + * instruction to also clear the CPU buffers. VERW clobbers CFLAGS.ZF. + * + * Note: Only the memory operand variant of VERW clears the CPU buffers. + */ +.macro CLEAR_CPU_BUFFERS + ALTERNATIVE "", __stringify(verw _ASM_RIP(mds_verw_sel)), X86_FEATURE_CLEAR_CPU_BUF +.endm + #else /* __ASSEMBLY__ */
#define ANNOTATE_RETPOLINE_SAFE \ @@ -536,6 +547,8 @@ DECLARE_STATIC_KEY_FALSE(switch_mm_cond_
DECLARE_STATIC_KEY_FALSE(mmio_stale_data_clear);
+extern u16 mds_verw_sel; + #include <asm/segment.h>
/**
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonathan Corbet corbet@lwn.net
commit 0df8669f69a8638f04c6a3d1f3b7056c2c18f62c upstream.
The addition of the XFS online fsck documentation starting with commit a8f6c2e54ddc ("xfs: document the motivation for online fsck design") added a deeper level of nesting than LaTeX is prepared to deal with. That caused a pdfdocs build failure with the helpful "Too deeply nested" error message buried deeply in Documentation/output/filesystems.log.
Increase the "maxlistdepth" parameter to instruct LaTeX that it needs to deal with the deeper nesting whether it wants to or not.
Suggested-by: Akira Yokosawa akiyks@gmail.com Tested-by: Akira Yokosawa akiyks@gmail.com Cc: stable@vger.kernel.org # v6.4+ Link: https://lore.kernel.org/linux-doc/67f6ac60-7957-4b92-9d72-a08fbad0e028@gmail... Signed-off-by: Jonathan Corbet corbet@lwn.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/conf.py | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -383,6 +383,12 @@ latex_elements = { verbatimhintsturnover=false, ''',
+ # + # Some of our authors are fond of deep nesting; tell latex to + # cope. + # + 'maxlistdepth': '10', + # For CJK One-half spacing, need to be in front of hyperref 'extrapackages': r'\usepackage{setspace}',
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen chenhuacai@loongson.cn
commit 9fa304b9f8ec440e614af6d35826110c633c4074 upstream.
The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the arch_mem_init() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier in the init sequence, so that the reserved memory regions are set aside before any allocations are done using memblock.
Cc: stable@vger.kernel.org Fixes: 88d4d957edc707e ("LoongArch: Add FDT booting support from efi system table") Signed-off-by: Oreoluwa Babatunde quic_obabatun@quicinc.com Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/loongarch/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/loongarch/kernel/setup.c +++ b/arch/loongarch/kernel/setup.c @@ -366,6 +366,8 @@ void __init platform_init(void) acpi_gbl_use_default_register_widths = false; acpi_boot_table_init(); #endif + + early_init_fdt_scan_reserved_mem(); unflatten_and_copy_device_tree();
#ifdef CONFIG_NUMA @@ -399,8 +401,6 @@ static void __init arch_mem_init(char **
check_kernel_sections_mem();
- early_init_fdt_scan_reserved_mem(); - /* * In order to reduce the possibility of kernel panic when failed to * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen chenhuacai@loongson.cn
commit 1001db6c42e4012b55e5ee19405490f23e033b5a upstream.
Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts):
WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58
Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/loongarch/kernel/smp.c | 1 + 1 file changed, 1 insertion(+)
--- a/arch/loongarch/kernel/smp.c +++ b/arch/loongarch/kernel/smp.c @@ -334,6 +334,7 @@ void __noreturn arch_cpu_idle_dead(void) addr = iocsr_read64(LOONGARCH_IOCSR_MBUF0); } while (addr == 0);
+ local_irq_disable(); init_fn = (void *)TO_CACHE(addr); iocsr_write32(0xffffffff, LOONGARCH_IOCSR_IPI_CLEAR);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Huacai Chen chenhuacai@loongson.cn
commit 752cd08da320a667a833803a8fd6bb266114cce5 upstream.
Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems:
jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4
Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/loongarch/kernel/smp.c | 121 ++++++++++++++++++++++++-------------------- 1 file changed, 68 insertions(+), 53 deletions(-)
--- a/arch/loongarch/kernel/smp.c +++ b/arch/loongarch/kernel/smp.c @@ -88,6 +88,73 @@ void show_ipi_list(struct seq_file *p, i } }
+static inline void set_cpu_core_map(int cpu) +{ + int i; + + cpumask_set_cpu(cpu, &cpu_core_setup_map); + + for_each_cpu(i, &cpu_core_setup_map) { + if (cpu_data[cpu].package == cpu_data[i].package) { + cpumask_set_cpu(i, &cpu_core_map[cpu]); + cpumask_set_cpu(cpu, &cpu_core_map[i]); + } + } +} + +static inline void set_cpu_sibling_map(int cpu) +{ + int i; + + cpumask_set_cpu(cpu, &cpu_sibling_setup_map); + + for_each_cpu(i, &cpu_sibling_setup_map) { + if (cpus_are_siblings(cpu, i)) { + cpumask_set_cpu(i, &cpu_sibling_map[cpu]); + cpumask_set_cpu(cpu, &cpu_sibling_map[i]); + } + } +} + +static inline void clear_cpu_sibling_map(int cpu) +{ + int i; + + for_each_cpu(i, &cpu_sibling_setup_map) { + if (cpus_are_siblings(cpu, i)) { + cpumask_clear_cpu(i, &cpu_sibling_map[cpu]); + cpumask_clear_cpu(cpu, &cpu_sibling_map[i]); + } + } + + cpumask_clear_cpu(cpu, &cpu_sibling_setup_map); +} + +/* + * Calculate a new cpu_foreign_map mask whenever a + * new cpu appears or disappears. + */ +void calculate_cpu_foreign_map(void) +{ + int i, k, core_present; + cpumask_t temp_foreign_map; + + /* Re-calculate the mask */ + cpumask_clear(&temp_foreign_map); + for_each_online_cpu(i) { + core_present = 0; + for_each_cpu(k, &temp_foreign_map) + if (cpus_are_siblings(i, k)) + core_present = 1; + if (!core_present) + cpumask_set_cpu(i, &temp_foreign_map); + } + + for_each_online_cpu(i) + cpumask_andnot(&cpu_foreign_map[i], + &temp_foreign_map, &cpu_sibling_map[i]); +} + /* Send mailbox buffer via Mail_Send */ static void csr_mail_send(uint64_t data, int cpu, int mailbox) { @@ -300,6 +367,7 @@ int loongson_cpu_disable(void) numa_remove_cpu(cpu); #endif set_cpu_online(cpu, false); + clear_cpu_sibling_map(cpu); calculate_cpu_foreign_map(); local_irq_save(flags); irq_migrate_all_off_this_cpu(); @@ -377,59 +445,6 @@ static int __init ipi_pm_init(void) core_initcall(ipi_pm_init); #endif
-static inline void set_cpu_sibling_map(int cpu) -{ - int i; - - cpumask_set_cpu(cpu, &cpu_sibling_setup_map); - - for_each_cpu(i, &cpu_sibling_setup_map) { - if (cpus_are_siblings(cpu, i)) { - cpumask_set_cpu(i, &cpu_sibling_map[cpu]); - cpumask_set_cpu(cpu, &cpu_sibling_map[i]); - } - } -} - -static inline void set_cpu_core_map(int cpu) -{ - int i; - - cpumask_set_cpu(cpu, &cpu_core_setup_map); - - for_each_cpu(i, &cpu_core_setup_map) { - if (cpu_data[cpu].package == cpu_data[i].package) { - cpumask_set_cpu(i, &cpu_core_map[cpu]); - cpumask_set_cpu(cpu, &cpu_core_map[i]); - } - } -} - -/* - * Calculate a new cpu_foreign_map mask whenever a - * new cpu appears or disappears. - */ -void calculate_cpu_foreign_map(void) -{ - int i, k, core_present; - cpumask_t temp_foreign_map; - - /* Re-calculate the mask */ - cpumask_clear(&temp_foreign_map); - for_each_online_cpu(i) { - core_present = 0; - for_each_cpu(k, &temp_foreign_map) - if (cpus_are_siblings(i, k)) - core_present = 1; - if (!core_present) - cpumask_set_cpu(i, &temp_foreign_map); - } - - for_each_online_cpu(i) - cpumask_andnot(&cpu_foreign_map[i], - &temp_foreign_map, &cpu_sibling_map[i]); -} - /* Preload SMP state for boot cpu */ void smp_prepare_boot_cpu(void) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qu Wenruo wqu@suse.com
commit e42b9d8b9ea2672811285e6a7654887ff64d23f3 upstream.
[BUG] With the following file extent layout, defrag would do unnecessary IO and result more on-disk space usage.
# mkfs.btrfs -f $dev # mount $dev $mnt # xfs_io -f -c "pwrite 0 40m" $mnt/foobar # sync # xfs_io -f -c "pwrite 40m 16k" $mnt/foobar # sync
Above command would lead to the following file extent layout:
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 41943040 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none)
Which is mostly fine. We can allow the final 16K to be merged with the previous 40M, but it's upon the end users' preference.
But if we defrag the file using the default parameters, it would result worse file layout:
# btrfs filesystem defrag $mnt/foobar # sync
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 8650752 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53 generation 9 type 1 (regular) extent data disk byte 340787200 nr 33292288 extent data offset 0 nr 33292288 ram 33292288 extent compression 0 (none) item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none)
Note the original 40M extent is still there, but a new 32M extent is created for no benefit at all.
[CAUSE] There is an existing check to make sure we won't defrag a large enough extent (the threshold is by default 32M).
But the check is using the length to the end of the extent:
range_len = em->len - (cur - em->start);
/* Skip too large extent */ if (range_len >= extent_thresh) goto next;
This means, for the first 8MiB of the extent, the range_len is always smaller than the default threshold, and would not be defragged. But after the first 8MiB, the remaining part would fit the requirement, and be defragged.
Such different behavior inside the same extent caused the above problem, and we should avoid different defrag decision inside the same extent.
[FIX] Instead of using @range_len, just use @em->len, so that we have a consistent decision among the same file extent.
Now with this fix, we won't touch the extent, thus not making it any worse.
Reported-by: Filipe Manana fdmanana@suse.com Fixes: 0cb5950f3f3b ("btrfs: fix deadlock when reserving space during defrag") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov boris@bur.io Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Qu Wenruo wqu@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/defrag.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/defrag.c +++ b/fs/btrfs/defrag.c @@ -1047,7 +1047,7 @@ static int defrag_collect_targets(struct goto add;
/* Skip too large extent */ - if (range_len >= extent_thresh) + if (em->len >= extent_thresh) goto next;
/*
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Hellström thomas.hellstrom@linux.intel.com
commit 40510a941d27d405a82dc3320823d875f94625df upstream.
If caching mode change fails due to, for example, OOM we free the allocated pages in a two-step process. First the pages for which the caching change has already succeeded. Secondly the pages for which a caching change did not succeed.
However the second step was incorrectly freeing the pages already freed in the first step.
Fix.
Signed-off-by: Thomas Hellström thomas.hellstrom@linux.intel.com Fixes: 379989e7cbdc ("drm/ttm/pool: Fix ttm_pool_alloc error path") Cc: Christian König christian.koenig@amd.com Cc: Dave Airlie airlied@redhat.com Cc: Christian Koenig christian.koenig@amd.com Cc: Huang Rui ray.huang@amd.com Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org # v6.4+ Reviewed-by: Matthew Auld matthew.auld@intel.com Reviewed-by: Christian König christian.koenig@amd.com Link: https://patchwork.freedesktop.org/patch/msgid/20240221073324.3303-1-thomas.h... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/ttm/ttm_pool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/ttm/ttm_pool.c +++ b/drivers/gpu/drm/ttm/ttm_pool.c @@ -387,7 +387,7 @@ static void ttm_pool_free_range(struct t enum ttm_caching caching, pgoff_t start_page, pgoff_t end_page) { - struct page **pages = tt->pages; + struct page **pages = &tt->pages[start_page]; unsigned int order; pgoff_t i, nr;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin Blumenstingl martin.blumenstingl@googlemail.com
commit bd915ae73a2d78559b376ad2caf5e4ef51de2455 upstream.
Stop calling drm_bridge_remove() for bridges allocated/managed by other drivers in the remove paths of meson_encoder_{cvbs,dsi,hdmi}. drm_bridge_remove() unregisters the bridge so it cannot be used anymore. Doing so for bridges we don't own can lead to the video pipeline not being able to come up after -EPROBE_DEFER of the VPU because we're unregistering a bridge that's managed by another driver. The other driver doesn't know that we have unregistered it's bridge and on subsequent .probe() we're not able to find those bridges anymore (since nobody re-creates them).
This fixes probe errors on Meson8b boards with the CVBS outputs enabled.
Fixes: 09847723c12f ("drm/meson: remove drm bridges at aggregate driver unbind time") Fixes: 42dcf15f901c ("drm/meson: add DSI encoder") Cc: stable@vger.kernel.org Reported-by: Steve Morvai stevemorvai@hotmail.com Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Tested-by: Steve Morvai stevemorvai@hotmail.com Link: https://lore.kernel.org/r/20240215220442.1343152-1-martin.blumenstingl@googl... Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Neil Armstrong neil.armstrong@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20240215220442.1343152-1-marti... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/meson/meson_encoder_cvbs.c | 1 - drivers/gpu/drm/meson/meson_encoder_dsi.c | 1 - drivers/gpu/drm/meson/meson_encoder_hdmi.c | 1 - 3 files changed, 3 deletions(-)
--- a/drivers/gpu/drm/meson/meson_encoder_cvbs.c +++ b/drivers/gpu/drm/meson/meson_encoder_cvbs.c @@ -294,6 +294,5 @@ void meson_encoder_cvbs_remove(struct me if (priv->encoders[MESON_ENC_CVBS]) { meson_encoder_cvbs = priv->encoders[MESON_ENC_CVBS]; drm_bridge_remove(&meson_encoder_cvbs->bridge); - drm_bridge_remove(meson_encoder_cvbs->next_bridge); } } --- a/drivers/gpu/drm/meson/meson_encoder_dsi.c +++ b/drivers/gpu/drm/meson/meson_encoder_dsi.c @@ -168,6 +168,5 @@ void meson_encoder_dsi_remove(struct mes if (priv->encoders[MESON_ENC_DSI]) { meson_encoder_dsi = priv->encoders[MESON_ENC_DSI]; drm_bridge_remove(&meson_encoder_dsi->bridge); - drm_bridge_remove(meson_encoder_dsi->next_bridge); } } --- a/drivers/gpu/drm/meson/meson_encoder_hdmi.c +++ b/drivers/gpu/drm/meson/meson_encoder_hdmi.c @@ -474,6 +474,5 @@ void meson_encoder_hdmi_remove(struct me if (priv->encoders[MESON_ENC_HDMI]) { meson_encoder_hdmi = priv->encoders[MESON_ENC_HDMI]; drm_bridge_remove(&meson_encoder_hdmi->bridge); - drm_bridge_remove(meson_encoder_hdmi->next_bridge); } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arunpravin Paneer Selvam Arunpravin.PaneerSelvam@amd.com
commit 02f76a9cd4494719600baf1ab278930df39431ab upstream.
Remove the duplicate list_splice_tail call when the total_allocated < size condition is true.
Cc: stable@vger.kernel.org # 6.7+ Fixes: 8746c6c9dfa3 ("drm/buddy: Fix alloc_range() error handling code") Reported-by: Bert Karwatzki spasswolf@web.de Signed-off-by: Arunpravin Paneer Selvam Arunpravin.PaneerSelvam@amd.com Reviewed-by: Matthew Auld matthew.auld@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20240216100048.4101-1-Arunprav... Signed-off-by: Christian König christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/drm_buddy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_buddy.c b/drivers/gpu/drm/drm_buddy.c index c1a99bf4dffd..c4222b886db7 100644 --- a/drivers/gpu/drm/drm_buddy.c +++ b/drivers/gpu/drm/drm_buddy.c @@ -538,13 +538,13 @@ static int __alloc_range(struct drm_buddy *mm, list_add(&block->left->tmp_link, dfs); } while (1);
- list_splice_tail(&allocated, blocks); - if (total_allocated < size) { err = -ENOSPC; goto err_free; }
+ list_splice_tail(&allocated, blocks); + return 0;
err_undo:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lewis Huang lewis.huang@amd.com
commit 4e73826089ce899357580bbf6e0afe4e6f9900b7 upstream.
[Why] The old asic only have 1 pwrseq hw. We don't need to map the diginst to pwrseq inst in old asic.
[How] 1. Only mapping dig to pwrseq for new asic. 2. Move mapping function into dcn specific panel control component
Cc: Stable stable@vger.kernel.org # v6.6+ Cc: Mario Limonciello mario.limonciello@amd.com Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3122 Reviewed-by: Anthony Koo anthony.koo@amd.com Acked-by: Rodrigo Siqueira rodrigo.siqueira@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Lewis Huang lewis.huang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c | 1 drivers/gpu/drm/amd/display/dc/dcn301/dcn301_panel_cntl.c | 1 drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c | 18 +++++++++ drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h | 2 - drivers/gpu/drm/amd/display/dc/link/link_factory.c | 26 -------------- 5 files changed, 21 insertions(+), 27 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_panel_cntl.c @@ -290,4 +290,5 @@ void dce_panel_cntl_construct( dce_panel_cntl->base.funcs = &dce_link_panel_cntl_funcs; dce_panel_cntl->base.ctx = init_data->ctx; dce_panel_cntl->base.inst = init_data->inst; + dce_panel_cntl->base.pwrseq_inst = 0; } --- a/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_panel_cntl.c +++ b/drivers/gpu/drm/amd/display/dc/dcn301/dcn301_panel_cntl.c @@ -215,4 +215,5 @@ void dcn301_panel_cntl_construct( dcn301_panel_cntl->base.funcs = &dcn301_link_panel_cntl_funcs; dcn301_panel_cntl->base.ctx = init_data->ctx; dcn301_panel_cntl->base.inst = init_data->inst; + dcn301_panel_cntl->base.pwrseq_inst = 0; } --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c @@ -154,8 +154,24 @@ void dcn31_panel_cntl_construct( struct dcn31_panel_cntl *dcn31_panel_cntl, const struct panel_cntl_init_data *init_data) { + uint8_t pwrseq_inst = 0xF; + dcn31_panel_cntl->base.funcs = &dcn31_link_panel_cntl_funcs; dcn31_panel_cntl->base.ctx = init_data->ctx; dcn31_panel_cntl->base.inst = init_data->inst; - dcn31_panel_cntl->base.pwrseq_inst = init_data->pwrseq_inst; + + switch (init_data->eng_id) { + case ENGINE_ID_DIGA: + pwrseq_inst = 0; + break; + case ENGINE_ID_DIGB: + pwrseq_inst = 1; + break; + default: + DC_LOG_WARNING("Unsupported pwrseq engine id: %d!\n", init_data->eng_id); + ASSERT(false); + break; + } + + dcn31_panel_cntl->base.pwrseq_inst = pwrseq_inst; } --- a/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h @@ -56,7 +56,7 @@ struct panel_cntl_funcs { struct panel_cntl_init_data { struct dc_context *ctx; uint32_t inst; - uint32_t pwrseq_inst; + uint32_t eng_id; };
struct panel_cntl { --- a/drivers/gpu/drm/amd/display/dc/link/link_factory.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_factory.c @@ -368,30 +368,6 @@ static enum transmitter translate_encode } }
-static uint8_t translate_dig_inst_to_pwrseq_inst(struct dc_link *link) -{ - uint8_t pwrseq_inst = 0xF; - struct dc_context *dc_ctx = link->dc->ctx; - - DC_LOGGER_INIT(dc_ctx->logger); - - switch (link->eng_id) { - case ENGINE_ID_DIGA: - pwrseq_inst = 0; - break; - case ENGINE_ID_DIGB: - pwrseq_inst = 1; - break; - default: - DC_LOG_WARNING("Unsupported pwrseq engine id: %d!\n", link->eng_id); - ASSERT(false); - break; - } - - return pwrseq_inst; -} - - static void link_destruct(struct dc_link *link) { int i; @@ -655,7 +631,7 @@ static bool construct_phy(struct dc_link link->link_id.id == CONNECTOR_ID_LVDS)) { panel_cntl_init_data.ctx = dc_ctx; panel_cntl_init_data.inst = panel_cntl_init_data.ctx->dc_edp_id_count; - panel_cntl_init_data.pwrseq_inst = translate_dig_inst_to_pwrseq_inst(link); + panel_cntl_init_data.eng_id = link->eng_id; link->panel_cntl = link->dc->res_pool->funcs->panel_cntl_create( &panel_cntl_init_data);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wayne Lin wayne.lin@amd.com
commit 22e1dc4b2fec17af70f297a4295c5f19a0f3fbeb upstream.
[Why] Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work" when boot up with a mst tbt4 dock connected. After analyzing, there are few parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not aligned with legacy interface sequence
[How] Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler registration into register_hpd_handlers() to align other interfaces and get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that while calling dc_link_detect(). USB4 connection status will be proactively detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable stable@vger.kernel.org Reviewed-by: Aurabindo Pillai aurabindo.pillai@amd.com Acked-by: Rodrigo Siqueira rodrigo.siqueira@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Wayne Lin wayne.lin@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 37 ++++++++++------------ 1 file changed, 18 insertions(+), 19 deletions(-)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1810,21 +1810,12 @@ static int amdgpu_dm_init(struct amdgpu_ DRM_ERROR("amdgpu: fail to register dmub aux callback"); goto error; } - if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true)) { - DRM_ERROR("amdgpu: fail to register dmub hpd callback"); - goto error; - } - if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true)) { - DRM_ERROR("amdgpu: fail to register dmub hpd callback"); - goto error; - } - } - - /* Enable outbox notification only after IRQ handlers are registered and DMUB is alive. - * It is expected that DMUB will resend any pending notifications at this point, for - * example HPD from DPIA. - */ - if (dc_is_dmub_outbox_supported(adev->dm.dc)) { + /* Enable outbox notification only after IRQ handlers are registered and DMUB is alive. + * It is expected that DMUB will resend any pending notifications at this point. Note + * that hpd and hpd_irq handler registration are deferred to register_hpd_handlers() to + * align legacy interface initialization sequence. Connection status will be proactivly + * detected once in the amdgpu_dm_initialize_drm_device. + */ dc_enable_dmub_outbox(adev->dm.dc);
/* DPIA trace goes to dmesg logs only if outbox is enabled */ @@ -3494,6 +3485,14 @@ static void register_hpd_handlers(struct int_params.requested_polarity = INTERRUPT_POLARITY_DEFAULT; int_params.current_polarity = INTERRUPT_POLARITY_DEFAULT;
+ if (dc_is_dmub_outbox_supported(adev->dm.dc)) { + if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD, dmub_hpd_callback, true)) + DRM_ERROR("amdgpu: fail to register dmub hpd callback"); + + if (!register_dmub_notify_callback(adev, DMUB_NOTIFICATION_HPD_IRQ, dmub_hpd_callback, true)) + DRM_ERROR("amdgpu: fail to register dmub hpd callback"); + } + list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
@@ -3519,10 +3518,6 @@ static void register_hpd_handlers(struct handle_hpd_rx_irq, (void *) aconnector); } - - if (adev->dm.hpd_rx_offload_wq) - adev->dm.hpd_rx_offload_wq[connector->index].aconnector = - aconnector; } }
@@ -4493,6 +4488,10 @@ static int amdgpu_dm_initialize_drm_devi
link = dc_get_link_at_index(dm->dc, i);
+ if (dm->hpd_rx_offload_wq) + dm->hpd_rx_offload_wq[aconnector->base.index].aconnector = + aconnector; + if (!dc_link_detect_connection_type(link, &new_connection_type)) DRM_ERROR("KMS: Failed to detect connector\n");
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ma Jun Jun.Ma2@amd.com
commit bbfaf2aea7164db59739728d62d9cc91d64ff856 upstream.
Don't set power state flag when system enter runtime suspend, or it may cause runtime resume failure issue.
Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend") Signed-off-by: Ma Jun Jun.Ma2@amd.com Reviewed-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c @@ -1528,6 +1528,9 @@ bool amdgpu_acpi_is_s0ix_active(struct a */ void amdgpu_choose_low_power_state(struct amdgpu_device *adev) { + if (adev->in_runpm) + return; + if (amdgpu_acpi_is_s0ix_active(adev)) adev->in_s0ix = true; else if (amdgpu_acpi_is_s3_active(adev))
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Oberparleiter oberpar@linux.ibm.com
commit 5ef1dc40ffa6a6cb968b0fdc43c3a61727a9e950 upstream.
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code when drivers try to start I/O while a path-verification (PV) process is pending. This can lead to failed device initialization attempts with symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition code 1 reply to make path-verification handling consistent from a driver's point of view.
The problem can be reproduced semi-regularly using the following process, while repeating steps 2-3 as necessary (example assumes an OSA device with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group 2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online 3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \ echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives indications about changes in a device path's availability. This occurs for example when hardware events indicate a change in channel-path status, or when a manual operation such as a CHPID vary or configure operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a successful I/O start (ccw_device_start() return code 0). Then, after completion of PV, CIO synthesizes an interrupt response that indicates an asynchronous status condition that prevented the start of the I/O (deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O, PV is delayed until after I/O completion was reported to the driver's interrupt handler. To ensure that PV can be started eventually, CIO reports a device busy condition (ccw_device_start() return code -EBUSY) if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms started appearing with the following CIO commit that causes a PV indication when a device is removed from the cio_ignore list after the associated parent subchannel device was probed, but before online processing of the CCW device has started:
2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut module [1] as well as Linux vendor-specific systemd service scripts[2]. When combined, this commit and boot scripts cause a frequent occurrence of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore [2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+ Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Tested-By: Thorsten Winkler twinkler@linux.ibm.com Reviewed-by: Thorsten Winkler twinkler@linux.ibm.com Signed-off-by: Peter Oberparleiter oberpar@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/s390/cio/device_ops.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -202,7 +202,8 @@ int ccw_device_start_timeout_key(struct return -EINVAL; if (cdev->private->state == DEV_STATE_NOT_OPER) return -ENODEV; - if (cdev->private->state == DEV_STATE_VERIFY) { + if (cdev->private->state == DEV_STATE_VERIFY || + cdev->private->flags.doverify) { /* Remember to fake irb when finished. */ if (!cdev->private->flags.fake_irb) { cdev->private->flags.fake_irb = FAKE_CMD_IRB; @@ -214,8 +215,7 @@ int ccw_device_start_timeout_key(struct } if (cdev->private->state != DEV_STATE_ONLINE || ((sch->schib.scsw.cmd.stctl & SCSW_STCTL_PRIM_STATUS) && - !(sch->schib.scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS)) || - cdev->private->flags.doverify) + !(sch->schib.scsw.cmd.stctl & SCSW_STCTL_SEC_STATUS))) return -EBUSY; ret = cio_set_options (sch, flags); if (ret)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit 4b085736e44dbbe69b5eea1a8a294f404678a1f4 upstream.
In ata ata_dev_power_set_standby(), check that the target device is not sleeping. If it is, there is no need to do anything.
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Niklas Cassel cassel@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-core.c | 4 ++++ 1 file changed, 4 insertions(+)
--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2017,6 +2017,10 @@ void ata_dev_power_set_standby(struct at struct ata_taskfile tf; unsigned int err_mask;
+ /* If the device is already sleeping, do nothing. */ + if (dev->flags & ATA_DFLAG_SLEEPING) + return; + /* * Some odd clown BIOSes issue spindown on power off (ACPI S4 or S5) * causing some drives to spin up and down again. For these, do nothing
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Damien Le Moal dlemoal@kernel.org
commit 9cec467d0502b24660f413a0e8fc782903b46d5b upstream.
For regular system shutdown, ata_dev_power_set_standby() will be executed twice: once the scsi device is removed and another when ata_pci_shutdown_one() executes and EH completes unloading the devices.
Make the second call to ata_dev_power_set_standby() do nothing by using ata_dev_power_is_active() and return if the device is already in standby.
Fixes: 2da4c5e24e86 ("ata: libata-core: Improve ata_dev_power_set_active()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Niklas Cassel cassel@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/libata-core.c | 59 +++++++++++++++++++++++----------------------- 1 file changed, 30 insertions(+), 29 deletions(-)
--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2001,6 +2001,33 @@ bool ata_dev_power_init_tf(struct ata_de return true; }
+static bool ata_dev_power_is_active(struct ata_device *dev) +{ + struct ata_taskfile tf; + unsigned int err_mask; + + ata_tf_init(dev, &tf); + tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf.protocol = ATA_PROT_NODATA; + tf.command = ATA_CMD_CHK_POWER; + + err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); + if (err_mask) { + ata_dev_err(dev, "Check power mode failed (err_mask=0x%x)\n", + err_mask); + /* + * Assume we are in standby mode so that we always force a + * spinup in ata_dev_power_set_active(). + */ + return false; + } + + ata_dev_dbg(dev, "Power mode: 0x%02x\n", tf.nsect); + + /* Active or idle */ + return tf.nsect == 0xff; +} + /** * ata_dev_power_set_standby - Set a device power mode to standby * @dev: target device @@ -2017,8 +2044,9 @@ void ata_dev_power_set_standby(struct at struct ata_taskfile tf; unsigned int err_mask;
- /* If the device is already sleeping, do nothing. */ - if (dev->flags & ATA_DFLAG_SLEEPING) + /* If the device is already sleeping or in standby, do nothing. */ + if ((dev->flags & ATA_DFLAG_SLEEPING) || + !ata_dev_power_is_active(dev)) return;
/* @@ -2046,33 +2074,6 @@ void ata_dev_power_set_standby(struct at err_mask); }
-static bool ata_dev_power_is_active(struct ata_device *dev) -{ - struct ata_taskfile tf; - unsigned int err_mask; - - ata_tf_init(dev, &tf); - tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; - tf.protocol = ATA_PROT_NODATA; - tf.command = ATA_CMD_CHK_POWER; - - err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0); - if (err_mask) { - ata_dev_err(dev, "Check power mode failed (err_mask=0x%x)\n", - err_mask); - /* - * Assume we are in standby mode so that we always force a - * spinup in ata_dev_power_set_active(). - */ - return false; - } - - ata_dev_dbg(dev, "Power mode: 0x%02x\n", tf.nsect); - - /* Active or idle */ - return tf.nsect == 0xff; -} - /** * ata_dev_power_set_active - Set a device power mode to active * @dev: target device
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche bvanassche@acm.org
commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream.
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears:
WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8
Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio.
Suggested-by: Jens Axboe axboe@kernel.dk Cc: Christoph Hellwig hch@lst.de Cc: Avi Kivity avi@scylladb.com Cc: Sandeep Dhavale dhavale@google.com Cc: Jens Axboe axboe@kernel.dk Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Kent Overstreet kent.overstreet@linux.dev Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche bvanassche@acm.org Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/aio.c | 9 ++++++++- include/linux/fs.h | 2 ++ 2 files changed, 10 insertions(+), 1 deletion(-)
--- a/fs/aio.c +++ b/fs/aio.c @@ -594,6 +594,13 @@ void kiocb_set_cancel_fn(struct kiocb *i struct kioctx *ctx = req->ki_ctx; unsigned long flags;
+ /* + * kiocb didn't come from aio or is neither a read nor a write, hence + * ignore it. + */ + if (!(iocb->ki_flags & IOCB_AIO_RW)) + return; + if (WARN_ON_ONCE(!list_empty(&req->ki_list))) return;
@@ -1463,7 +1470,7 @@ static int aio_prep_rw(struct kiocb *req req->ki_complete = aio_complete_rw; req->private = NULL; req->ki_pos = iocb->aio_offset; - req->ki_flags = req->ki_filp->f_iocb_flags; + req->ki_flags = req->ki_filp->f_iocb_flags | IOCB_AIO_RW; if (iocb->aio_flags & IOCB_FLAG_RESFD) req->ki_flags |= IOCB_EVENTFD; if (iocb->aio_flags & IOCB_FLAG_IOPRIO) { --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -352,6 +352,8 @@ enum rw_hint { * unrelated IO (like cache flushing, new IO generation, etc). */ #define IOCB_DIO_CALLER_COMP (1 << 22) +/* kiocb is a read or write operation submitted by fs/aio.c. */ +#define IOCB_AIO_RW (1 << 23)
/* for use in trace events */ #define TRACE_IOCB_STRINGS \
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck linux@roeck-us.net
commit 1eb1e984379e2da04361763f66eec90dd75cf63e upstream.
Trying to run the iov_iter unit test on a nommu system such as the qemu kc705-nommu emulation results in a crash.
KTAP version 1 # Subtest: iov_iter # module: kunit_iov_iter 1..9 BUG: failure at mm/nommu.c:318/vmap()! Kernel panic - not syncing: BUG!
The test calls vmap() directly, but vmap() is not supported on nommu systems, causing the crash. TEST_IOV_ITER therefore needs to depend on MMU.
Link: https://lkml.kernel.org/r/20240208153010.1439753-1-linux@roeck-us.net Fixes: 2d71340ff1d4 ("iov_iter: Kunit tests for copying to/from an iterator") Signed-off-by: Guenter Roeck linux@roeck-us.net Cc: David Howells dhowells@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- lib/Kconfig.debug | 1 + 1 file changed, 1 insertion(+)
--- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -2234,6 +2234,7 @@ config TEST_DIV64 config TEST_IOV_ITER tristate "Test iov_iter operation" if !KUNIT_ALL_TESTS depends on KUNIT + depends on MMU default KUNIT_ALL_TESTS help Enable this to turn on testing of the operation of the I/O iterator
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
commit 42e15d12070b4ff9af2b980f1b65774c2dab0507 upstream.
If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-crypt reports an authentication error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array.
This commit fixes dm-crypt, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-crypt.c | 89 +++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 73 insertions(+), 16 deletions(-)
--- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -62,6 +62,8 @@ struct convert_context { struct skcipher_request *req; struct aead_request *req_aead; } r; + bool aead_recheck; + bool aead_failed;
};
@@ -82,6 +84,8 @@ struct dm_crypt_io { blk_status_t error; sector_t sector;
+ struct bvec_iter saved_bi_iter; + struct rb_node rb_node; } CRYPTO_MINALIGN_ATTR;
@@ -1370,10 +1374,13 @@ static int crypt_convert_block_aead(stru if (r == -EBADMSG) { sector_t s = le64_to_cpu(*sector);
- DMERR_LIMIT("%pg: INTEGRITY AEAD ERROR, sector %llu", - ctx->bio_in->bi_bdev, s); - dm_audit_log_bio(DM_MSG_PREFIX, "integrity-aead", - ctx->bio_in, s, 0); + ctx->aead_failed = true; + if (ctx->aead_recheck) { + DMERR_LIMIT("%pg: INTEGRITY AEAD ERROR, sector %llu", + ctx->bio_in->bi_bdev, s); + dm_audit_log_bio(DM_MSG_PREFIX, "integrity-aead", + ctx->bio_in, s, 0); + } }
if (!r && cc->iv_gen_ops && cc->iv_gen_ops->post) @@ -1757,6 +1764,8 @@ static void crypt_io_init(struct dm_cryp io->base_bio = bio; io->sector = sector; io->error = 0; + io->ctx.aead_recheck = false; + io->ctx.aead_failed = false; io->ctx.r.req = NULL; io->integrity_metadata = NULL; io->integrity_metadata_from_pool = false; @@ -1768,6 +1777,8 @@ static void crypt_inc_pending(struct dm_ atomic_inc(&io->io_pending); }
+static void kcryptd_queue_read(struct dm_crypt_io *io); + /* * One of the bios was finished. Check for completion of * the whole request and correctly clean up the buffer. @@ -1781,6 +1792,15 @@ static void crypt_dec_pending(struct dm_ if (!atomic_dec_and_test(&io->io_pending)) return;
+ if (likely(!io->ctx.aead_recheck) && unlikely(io->ctx.aead_failed) && + cc->on_disk_tag_size && bio_data_dir(base_bio) == READ) { + io->ctx.aead_recheck = true; + io->ctx.aead_failed = false; + io->error = 0; + kcryptd_queue_read(io); + return; + } + if (io->ctx.r.req) crypt_free_req(cc, io->ctx.r.req, base_bio);
@@ -1816,15 +1836,19 @@ static void crypt_endio(struct bio *clon struct dm_crypt_io *io = clone->bi_private; struct crypt_config *cc = io->cc; unsigned int rw = bio_data_dir(clone); - blk_status_t error; + blk_status_t error = clone->bi_status; + + if (io->ctx.aead_recheck && !error) { + kcryptd_queue_crypt(io); + return; + }
/* * free the processed pages */ - if (rw == WRITE) + if (rw == WRITE || io->ctx.aead_recheck) crypt_free_buffer_pages(cc, clone);
- error = clone->bi_status; bio_put(clone);
if (rw == READ && !error) { @@ -1845,6 +1869,22 @@ static int kcryptd_io_read(struct dm_cry struct crypt_config *cc = io->cc; struct bio *clone;
+ if (io->ctx.aead_recheck) { + if (!(gfp & __GFP_DIRECT_RECLAIM)) + return 1; + crypt_inc_pending(io); + clone = crypt_alloc_buffer(io, io->base_bio->bi_iter.bi_size); + if (unlikely(!clone)) { + crypt_dec_pending(io); + return 1; + } + clone->bi_iter.bi_sector = cc->start + io->sector; + crypt_convert_init(cc, &io->ctx, clone, clone, io->sector); + io->saved_bi_iter = clone->bi_iter; + dm_submit_bio_remap(io->base_bio, clone); + return 0; + } + /* * We need the original biovec array in order to decrypt the whole bio * data *afterwards* -- thanks to immutable biovecs we don't need to @@ -2107,6 +2147,14 @@ dec:
static void kcryptd_crypt_read_done(struct dm_crypt_io *io) { + if (io->ctx.aead_recheck) { + if (!io->error) { + io->ctx.bio_in->bi_iter = io->saved_bi_iter; + bio_copy_data(io->base_bio, io->ctx.bio_in); + } + crypt_free_buffer_pages(io->cc, io->ctx.bio_in); + bio_put(io->ctx.bio_in); + } crypt_dec_pending(io); }
@@ -2136,11 +2184,17 @@ static void kcryptd_crypt_read_convert(s
crypt_inc_pending(io);
- crypt_convert_init(cc, &io->ctx, io->base_bio, io->base_bio, - io->sector); + if (io->ctx.aead_recheck) { + io->ctx.cc_sector = io->sector + cc->iv_offset; + r = crypt_convert(cc, &io->ctx, + test_bit(DM_CRYPT_NO_READ_WORKQUEUE, &cc->flags), true); + } else { + crypt_convert_init(cc, &io->ctx, io->base_bio, io->base_bio, + io->sector);
- r = crypt_convert(cc, &io->ctx, - test_bit(DM_CRYPT_NO_READ_WORKQUEUE, &cc->flags), true); + r = crypt_convert(cc, &io->ctx, + test_bit(DM_CRYPT_NO_READ_WORKQUEUE, &cc->flags), true); + } /* * Crypto API backlogged the request, because its queue was full * and we're in softirq context, so continue from a workqueue @@ -2182,10 +2236,13 @@ static void kcryptd_async_done(void *dat if (error == -EBADMSG) { sector_t s = le64_to_cpu(*org_sector_of_dmreq(cc, dmreq));
- DMERR_LIMIT("%pg: INTEGRITY AEAD ERROR, sector %llu", - ctx->bio_in->bi_bdev, s); - dm_audit_log_bio(DM_MSG_PREFIX, "integrity-aead", - ctx->bio_in, s, 0); + ctx->aead_failed = true; + if (ctx->aead_recheck) { + DMERR_LIMIT("%pg: INTEGRITY AEAD ERROR, sector %llu", + ctx->bio_in->bi_bdev, s); + dm_audit_log_bio(DM_MSG_PREFIX, "integrity-aead", + ctx->bio_in, s, 0); + } io->error = BLK_STS_PROTECTION; } else if (error < 0) io->error = BLK_STS_IOERR; @@ -3110,7 +3167,7 @@ static int crypt_ctr_optional(struct dm_ sval = strchr(opt_string + strlen("integrity:"), ':') + 1; if (!strcasecmp(sval, "aead")) { set_bit(CRYPT_MODE_INTEGRITY_AEAD, &cc->cipher_flags); - } else if (strcasecmp(sval, "none")) { + } else if (strcasecmp(sval, "none")) { ti->error = "Unknown integrity profile"; return -EINVAL; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Helge Deller deller@gmx.de
commit 82b143aeb169b8b55798d7d2063032e1a6ceeeb0 upstream.
This reverts commit 0921244f6f4f0d05698b953fe632a99b38907226.
It broke CPU hotplugging because it modifies the __cpu_possible_mask after bootup, so that it will be different than nr_cpu_ids, which then effictively breaks the workqueue setup code and triggers crashes when shutting down CPUs at runtime.
Guenter was the first who noticed the wrong values in __cpu_possible_mask, since the cpumask Kunit tests were failig.
Reverting this commit fixes both issues, but sadly brings back this uncritical runtime warning: register_cpu_capacity_sysctl: too early to get CPU4 device!
Signed-off-by: Helge Deller deller@gmx.de Reported-by: Guenter Roeck linux@roeck-us.net Link: https://lkml.org/lkml/2024/2/4/146 Link: https://lore.kernel.org/lkml/Zb0mbHlIud_bqftx@slm.duckdns.org/t/ Cc: stable@vger.kernel.org # 6.0+ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/parisc/kernel/processor.c | 8 -------- 1 file changed, 8 deletions(-)
--- a/arch/parisc/kernel/processor.c +++ b/arch/parisc/kernel/processor.c @@ -172,7 +172,6 @@ static int __init processor_probe(struct p->cpu_num = cpu_info.cpu_num; p->cpu_loc = cpu_info.cpu_loc;
- set_cpu_possible(cpuid, true); store_cpu_topology(cpuid);
#ifdef CONFIG_SMP @@ -474,13 +473,6 @@ static struct parisc_driver cpu_driver _ */ void __init processor_init(void) { - unsigned int cpu; - reset_cpu_topology(); - - /* reset possible mask. We will mark those which are possible. */ - for_each_possible_cpu(cpu) - set_cpu_possible(cpu, false); - register_parisc_driver(&cpu_driver); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
commit c88f5e553fe38b2ffc4c33d08654e5281b297677 upstream.
If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-integrity reports an error [1]. The error is reported in a log and it may cause RAID leg being kicked out of the array.
This commit fixes dm-integrity, so that if integrity verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the integrity tag is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-integrity.c | 93 +++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 84 insertions(+), 9 deletions(-)
--- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -278,6 +278,8 @@ struct dm_integrity_c {
atomic64_t number_of_mismatches;
+ mempool_t recheck_pool; + struct notifier_block reboot_notifier; };
@@ -1689,6 +1691,79 @@ failed: get_random_bytes(result, ic->tag_size); }
+static void integrity_recheck(struct dm_integrity_io *dio) +{ + struct bio *bio = dm_bio_from_per_bio_data(dio, sizeof(struct dm_integrity_io)); + struct dm_integrity_c *ic = dio->ic; + struct bvec_iter iter; + struct bio_vec bv; + sector_t sector, logical_sector, area, offset; + char checksum_onstack[max_t(size_t, HASH_MAX_DIGESTSIZE, MAX_TAG_SIZE)]; + struct page *page; + void *buffer; + + get_area_and_offset(ic, dio->range.logical_sector, &area, &offset); + dio->metadata_block = get_metadata_sector_and_offset(ic, area, offset, + &dio->metadata_offset); + sector = get_data_sector(ic, area, offset); + logical_sector = dio->range.logical_sector; + + page = mempool_alloc(&ic->recheck_pool, GFP_NOIO); + buffer = page_to_virt(page); + + __bio_for_each_segment(bv, bio, iter, dio->bio_details.bi_iter) { + unsigned pos = 0; + + do { + char *mem; + int r; + struct dm_io_request io_req; + struct dm_io_region io_loc; + io_req.bi_opf = REQ_OP_READ; + io_req.mem.type = DM_IO_KMEM; + io_req.mem.ptr.addr = buffer; + io_req.notify.fn = NULL; + io_req.client = ic->io; + io_loc.bdev = ic->dev->bdev; + io_loc.sector = sector; + io_loc.count = ic->sectors_per_block; + + r = dm_io(&io_req, 1, &io_loc, NULL); + if (unlikely(r)) { + dio->bi_status = errno_to_blk_status(r); + goto free_ret; + } + + integrity_sector_checksum(ic, logical_sector, buffer, + checksum_onstack); + r = dm_integrity_rw_tag(ic, checksum_onstack, &dio->metadata_block, + &dio->metadata_offset, ic->tag_size, TAG_CMP); + if (r) { + if (r > 0) { + DMERR_LIMIT("%pg: Checksum failed at sector 0x%llx", + bio->bi_bdev, logical_sector); + atomic64_inc(&ic->number_of_mismatches); + dm_audit_log_bio(DM_MSG_PREFIX, "integrity-checksum", + bio, logical_sector, 0); + r = -EILSEQ; + } + dio->bi_status = errno_to_blk_status(r); + goto free_ret; + } + + mem = bvec_kmap_local(&bv); + memcpy(mem + pos, buffer, ic->sectors_per_block << SECTOR_SHIFT); + kunmap_local(mem); + + pos += ic->sectors_per_block << SECTOR_SHIFT; + sector += ic->sectors_per_block; + logical_sector += ic->sectors_per_block; + } while (pos < bv.bv_len); + } +free_ret: + mempool_free(page, &ic->recheck_pool); +} + static void integrity_metadata(struct work_struct *w) { struct dm_integrity_io *dio = container_of(w, struct dm_integrity_io, work); @@ -1776,15 +1851,8 @@ again: checksums_ptr - checksums, dio->op == REQ_OP_READ ? TAG_CMP : TAG_WRITE); if (unlikely(r)) { if (r > 0) { - sector_t s; - - s = sector - ((r + ic->tag_size - 1) / ic->tag_size); - DMERR_LIMIT("%pg: Checksum failed at sector 0x%llx", - bio->bi_bdev, s); - r = -EILSEQ; - atomic64_inc(&ic->number_of_mismatches); - dm_audit_log_bio(DM_MSG_PREFIX, "integrity-checksum", - bio, s, 0); + integrity_recheck(dio); + goto skip_io; } if (likely(checksums != checksums_onstack)) kfree(checksums); @@ -4261,6 +4329,12 @@ static int dm_integrity_ctr(struct dm_ta goto bad; }
+ r = mempool_init_page_pool(&ic->recheck_pool, 1, 0); + if (r) { + ti->error = "Cannot allocate mempool"; + goto bad; + } + ic->metadata_wq = alloc_workqueue("dm-integrity-metadata", WQ_MEM_RECLAIM, METADATA_WORKQUEUE_MAX_ACTIVE); if (!ic->metadata_wq) { @@ -4609,6 +4683,7 @@ static void dm_integrity_dtr(struct dm_t kvfree(ic->bbs); if (ic->bufio) dm_bufio_client_destroy(ic->bufio); + mempool_exit(&ic->recheck_pool); mempool_exit(&ic->journal_io_mempool); if (ic->io) dm_io_client_destroy(ic->io);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
commit 50c70240097ce41fe6bce6478b80478281e4d0f7 upstream.
It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio.
This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time.
[1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-crypt.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -2111,6 +2111,12 @@ static void kcryptd_crypt_write_convert( io->ctx.bio_out = clone; io->ctx.iter_out = clone->bi_iter;
+ if (crypt_integrity_aead(cc)) { + bio_copy_data(clone, io->base_bio); + io->ctx.bio_in = clone; + io->ctx.iter_in = clone->bi_iter; + } + sector += bio_sectors(clone);
crypt_inc_pending(io);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka mpatocka@redhat.com
commit 9177f3c0dea6143d05cac1bbd28668fd0e216d11 upstream.
If a userspace process reads (with O_DIRECT) multiple blocks into the same buffer, dm-verity reports an error [1].
This commit fixes dm-verity, so that if hash verification fails, the data is read again into a kernel buffer (where userspace can't modify it) and the hash is rechecked. If the recheck succeeds, the content of the kernel buffer is copied into the user buffer; if the recheck fails, an error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka mpatocka@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-verity-target.c | 86 +++++++++++++++++++++++++++++++++++++++--- drivers/md/dm-verity.h | 6 ++ 2 files changed, 86 insertions(+), 6 deletions(-)
--- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -482,6 +482,63 @@ int verity_for_bv_block(struct dm_verity return 0; }
+static int verity_recheck_copy(struct dm_verity *v, struct dm_verity_io *io, + u8 *data, size_t len) +{ + memcpy(data, io->recheck_buffer, len); + io->recheck_buffer += len; + + return 0; +} + +static int verity_recheck(struct dm_verity *v, struct dm_verity_io *io, + struct bvec_iter start, sector_t cur_block) +{ + struct page *page; + void *buffer; + int r; + struct dm_io_request io_req; + struct dm_io_region io_loc; + + page = mempool_alloc(&v->recheck_pool, GFP_NOIO); + buffer = page_to_virt(page); + + io_req.bi_opf = REQ_OP_READ; + io_req.mem.type = DM_IO_KMEM; + io_req.mem.ptr.addr = buffer; + io_req.notify.fn = NULL; + io_req.client = v->io; + io_loc.bdev = v->data_dev->bdev; + io_loc.sector = cur_block << (v->data_dev_block_bits - SECTOR_SHIFT); + io_loc.count = 1 << (v->data_dev_block_bits - SECTOR_SHIFT); + r = dm_io(&io_req, 1, &io_loc, NULL); + if (unlikely(r)) + goto free_ret; + + r = verity_hash(v, verity_io_hash_req(v, io), buffer, + 1 << v->data_dev_block_bits, + verity_io_real_digest(v, io), true); + if (unlikely(r)) + goto free_ret; + + if (memcmp(verity_io_real_digest(v, io), + verity_io_want_digest(v, io), v->digest_size)) { + r = -EIO; + goto free_ret; + } + + io->recheck_buffer = buffer; + r = verity_for_bv_block(v, io, &start, verity_recheck_copy); + if (unlikely(r)) + goto free_ret; + + r = 0; +free_ret: + mempool_free(page, &v->recheck_pool); + + return r; +} + static int verity_bv_zero(struct dm_verity *v, struct dm_verity_io *io, u8 *data, size_t len) { @@ -508,9 +565,7 @@ static int verity_verify_io(struct dm_ve { bool is_zero; struct dm_verity *v = io->v; -#if defined(CONFIG_DM_VERITY_FEC) struct bvec_iter start; -#endif struct bvec_iter iter_copy; struct bvec_iter *iter; struct crypto_wait wait; @@ -561,10 +616,7 @@ static int verity_verify_io(struct dm_ve if (unlikely(r < 0)) return r;
-#if defined(CONFIG_DM_VERITY_FEC) - if (verity_fec_is_enabled(v)) - start = *iter; -#endif + start = *iter; r = verity_for_io_block(v, io, iter, &wait); if (unlikely(r < 0)) return r; @@ -586,6 +638,10 @@ static int verity_verify_io(struct dm_ve * tasklet since it may sleep, so fallback to work-queue. */ return -EAGAIN; + } else if (verity_recheck(v, io, start, cur_block) == 0) { + if (v->validated_blocks) + set_bit(cur_block, v->validated_blocks); + continue; #if defined(CONFIG_DM_VERITY_FEC) } else if (verity_fec_decode(v, io, DM_VERITY_BLOCK_TYPE_DATA, cur_block, NULL, &start) == 0) { @@ -941,6 +997,10 @@ static void verity_dtr(struct dm_target if (v->verify_wq) destroy_workqueue(v->verify_wq);
+ mempool_exit(&v->recheck_pool); + if (v->io) + dm_io_client_destroy(v->io); + if (v->bufio) dm_bufio_client_destroy(v->bufio);
@@ -1379,6 +1439,20 @@ static int verity_ctr(struct dm_target * } v->hash_blocks = hash_position;
+ r = mempool_init_page_pool(&v->recheck_pool, 1, 0); + if (unlikely(r)) { + ti->error = "Cannot allocate mempool"; + goto bad; + } + + v->io = dm_io_client_create(); + if (IS_ERR(v->io)) { + r = PTR_ERR(v->io); + v->io = NULL; + ti->error = "Cannot allocate dm io"; + goto bad; + } + v->bufio = dm_bufio_client_create(v->hash_dev->bdev, 1 << v->hash_dev_block_bits, 1, sizeof(struct buffer_aux), dm_bufio_alloc_callback, NULL, --- a/drivers/md/dm-verity.h +++ b/drivers/md/dm-verity.h @@ -11,6 +11,7 @@ #ifndef DM_VERITY_H #define DM_VERITY_H
+#include <linux/dm-io.h> #include <linux/dm-bufio.h> #include <linux/device-mapper.h> #include <linux/interrupt.h> @@ -68,6 +69,9 @@ struct dm_verity { unsigned long *validated_blocks; /* bitset blocks validated */
char *signature_key_desc; /* signature keyring reference */ + + struct dm_io_client *io; + mempool_t recheck_pool; };
struct dm_verity_io { @@ -84,6 +88,8 @@ struct dm_verity_io {
struct work_struct work;
+ char *recheck_buffer; + /* * Three variably-size fields follow this struct: *
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams dan.j.williams@intel.com
commit 5c6224bfabbf7f3e491c51ab50fd2c6f92ba1141 upstream.
The expectation is that cxl_parse_cfwms() continues in the face the of failure as evidenced by code like:
cxlrd = cxl_root_decoder_alloc(root_port, ways, cxl_calc_hb); if (IS_ERR(cxlrd)) return 0;
There are other error paths in that function which mistakenly follow idiomatic expectations and return an error when they should not. Most of those mistakes are innocuous checks that hardly ever fail in practice. However, a recent change succeed in making the implementation more fragile by applying an idiomatic, but still wrong "fix" [1]. In this failure case the kernel reports:
cxl root0: Failed to populate active decoder targets cxl_acpi ACPI0017:00: Failed to add decode range: [mem 0x00000000-0x7fffffff flags 0x200]
...which is a real issue with that one window (to be fixed separately), but ends up failing the entirety of cxl_acpi_probe().
Undo that recent breakage while also removing the confusion about ignoring errors. Update all exits paths to return an error per typical expectations and let an outer wrapper function handle dropping the error.
Fixes: 91019b5bc7c2 ("cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()") [1] Cc: stable@vger.kernel.org Cc: Breno Leitao leitao@debian.org Cc: Alison Schofield alison.schofield@intel.com Cc: Vishal Verma vishal.l.verma@intel.com Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cxl/acpi.c | 46 ++++++++++++++++++++++++++++------------------ 1 file changed, 28 insertions(+), 18 deletions(-)
--- a/drivers/cxl/acpi.c +++ b/drivers/cxl/acpi.c @@ -194,31 +194,27 @@ struct cxl_cfmws_context { int id; };
-static int cxl_parse_cfmws(union acpi_subtable_headers *header, void *arg, - const unsigned long end) +static int __cxl_parse_cfmws(struct acpi_cedt_cfmws *cfmws, + struct cxl_cfmws_context *ctx) { int target_map[CXL_DECODER_MAX_INTERLEAVE]; - struct cxl_cfmws_context *ctx = arg; struct cxl_port *root_port = ctx->root_port; struct resource *cxl_res = ctx->cxl_res; struct cxl_cxims_context cxims_ctx; struct cxl_root_decoder *cxlrd; struct device *dev = ctx->dev; - struct acpi_cedt_cfmws *cfmws; cxl_calc_hb_fn cxl_calc_hb; struct cxl_decoder *cxld; unsigned int ways, i, ig; struct resource *res; int rc;
- cfmws = (struct acpi_cedt_cfmws *) header; - rc = cxl_acpi_cfmws_verify(dev, cfmws); if (rc) { dev_err(dev, "CFMWS range %#llx-%#llx not registered\n", cfmws->base_hpa, cfmws->base_hpa + cfmws->window_size - 1); - return 0; + return rc; }
rc = eiw_to_ways(cfmws->interleave_ways, &ways); @@ -254,7 +250,7 @@ static int cxl_parse_cfmws(union acpi_su
cxlrd = cxl_root_decoder_alloc(root_port, ways, cxl_calc_hb); if (IS_ERR(cxlrd)) - return 0; + return PTR_ERR(cxlrd);
cxld = &cxlrd->cxlsd.cxld; cxld->flags = cfmws_to_decoder_flags(cfmws->restrictions); @@ -298,16 +294,7 @@ err_xormap: put_device(&cxld->dev); else rc = cxl_decoder_autoremove(dev, cxld); - if (rc) { - dev_err(dev, "Failed to add decode range: %pr", res); - return rc; - } - dev_dbg(dev, "add: %s node: %d range [%#llx - %#llx]\n", - dev_name(&cxld->dev), - phys_to_target_node(cxld->hpa_range.start), - cxld->hpa_range.start, cxld->hpa_range.end); - - return 0; + return rc;
err_insert: kfree(res->name); @@ -316,6 +303,29 @@ err_name: return -ENOMEM; }
+static int cxl_parse_cfmws(union acpi_subtable_headers *header, void *arg, + const unsigned long end) +{ + struct acpi_cedt_cfmws *cfmws = (struct acpi_cedt_cfmws *)header; + struct cxl_cfmws_context *ctx = arg; + struct device *dev = ctx->dev; + int rc; + + rc = __cxl_parse_cfmws(cfmws, ctx); + if (rc) + dev_err(dev, + "Failed to add decode range: [%#llx - %#llx] (%d)\n", + cfmws->base_hpa, + cfmws->base_hpa + cfmws->window_size - 1, rc); + else + dev_dbg(dev, "decode range: node: %d range [%#llx - %#llx]\n", + phys_to_target_node(cfmws->base_hpa), cfmws->base_hpa, + cfmws->base_hpa + cfmws->window_size - 1); + + /* never fail cxl_acpi load for a single window failure */ + return 0; +} + __mock struct acpi_device *to_cxl_host_bridge(struct device *host, struct device *dev) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li Ming ming4.li@intel.com
commit eef5c7b28dbecd6b141987a96db6c54e49828102 upstream.
The PCI AER model is an awkward fit for CXL error handling. While the expectation is that a PCI device can escalate to link reset to recover from an AER event, the same reset on CXL amounts to a surprise memory hotplug of massive amounts of memory.
At present, the CXL error handler attempts some optimistic error handling to unbind the device from the cxl_mem driver after reaping some RAS register values. This results in a "hopeful" attempt to unplug the memory, but there is no guarantee that will succeed.
A subsequent AER notification after the memdev unbind event can no longer assume the registers are mapped. Check for memdev bind before reaping status register values to avoid crashes of the form:
BUG: unable to handle page fault for address: ffa00000195e9100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core] [...] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x160 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x113/0x170 ? asm_exc_page_fault+0x26/0x30 ? __pfx_dpc_reset_link+0x10/0x10 ? __cxl_handle_ras+0x30/0x110 [cxl_core] ? find_cxl_port+0x59/0x80 [cxl_core] cxl_handle_rp_ras+0xbc/0xd0 [cxl_core] cxl_error_detected+0x6c/0xf0 [cxl_core] report_error_detected+0xc7/0x1c0 pci_walk_bus+0x73/0x90 pcie_do_recovery+0x23f/0x330
Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might need to be replaced with a new PCI_ERS_RESULT_PANIC.
Fixes: 6ac07883dbb5 ("cxl/pci: Add RCH downstream port error logging") Cc: stable@vger.kernel.org Suggested-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Li Ming ming4.li@intel.com Link: https://lore.kernel.org/r/20240129131856.2458980-1-ming4.li@intel.com Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cxl/core/pci.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-)
--- a/drivers/cxl/core/pci.c +++ b/drivers/cxl/core/pci.c @@ -931,11 +931,21 @@ static void cxl_handle_rdport_errors(str void cxl_cor_error_detected(struct pci_dev *pdev) { struct cxl_dev_state *cxlds = pci_get_drvdata(pdev); + struct device *dev = &cxlds->cxlmd->dev;
- if (cxlds->rcd) - cxl_handle_rdport_errors(cxlds); + scoped_guard(device, dev) { + if (!dev->driver) { + dev_warn(&pdev->dev, + "%s: memdev disabled, abort error handling\n", + dev_name(dev)); + return; + }
- cxl_handle_endpoint_cor_ras(cxlds); + if (cxlds->rcd) + cxl_handle_rdport_errors(cxlds); + + cxl_handle_endpoint_cor_ras(cxlds); + } } EXPORT_SYMBOL_NS_GPL(cxl_cor_error_detected, CXL);
@@ -947,16 +957,25 @@ pci_ers_result_t cxl_error_detected(stru struct device *dev = &cxlmd->dev; bool ue;
- if (cxlds->rcd) - cxl_handle_rdport_errors(cxlds); + scoped_guard(device, dev) { + if (!dev->driver) { + dev_warn(&pdev->dev, + "%s: memdev disabled, abort error handling\n", + dev_name(dev)); + return PCI_ERS_RESULT_DISCONNECT; + } + + if (cxlds->rcd) + cxl_handle_rdport_errors(cxlds); + /* + * A frozen channel indicates an impending reset which is fatal to + * CXL.mem operation, and will likely crash the system. On the off + * chance the situation is recoverable dump the status of the RAS + * capability registers and bounce the active state of the memdev. + */ + ue = cxl_handle_endpoint_ras(cxlds); + }
- /* - * A frozen channel indicates an impending reset which is fatal to - * CXL.mem operation, and will likely crash the system. On the off - * chance the situation is recoverable dump the status of the RAS - * capability registers and bounce the active state of the memdev. - */ - ue = cxl_handle_endpoint_ras(cxlds);
switch (state) { case pci_channel_io_normal:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robert Richter rrichter@amd.com
commit 0cab687205986491302cd2e440ef1d253031c221 upstream.
The Linux CXL subsystem is built on the assumption that HPA == SPA. That is, the host physical address (HPA) the HDM decoder registers are programmed with are system physical addresses (SPA).
During HDM decoder setup, the DVSEC CXL range registers (cxl-3.1, 8.1.3.8) are checked if the memory is enabled and the CXL range is in a HPA window that is described in a CFMWS structure of the CXL host bridge (cxl-3.1, 9.18.1.3).
Now, if the HPA is not an SPA, the CXL range does not match a CFMWS window and the CXL memory range will be disabled then. The HDM decoder stops working which causes system memory being disabled and further a system hang during HDM decoder initialization, typically when a CXL enabled kernel boots.
Prevent a system hang and do not disable the HDM decoder if the decoder's CXL range is not found in a CFMWS window.
Note the change only fixes a hardware hang, but does not implement HPA/SPA translation. Support for this can be added in a follow on patch series.
Signed-off-by: Robert Richter rrichter@amd.com Fixes: 34e37b4c432c ("cxl/port: Enable HDM Capability after validating DVSEC Ranges") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240216160113.407141-1-rrichter@amd.com Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/cxl/core/pci.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/cxl/core/pci.c +++ b/drivers/cxl/core/pci.c @@ -476,9 +476,9 @@ int cxl_hdm_decode_init(struct cxl_dev_s allowed++; }
- if (!allowed) { - cxl_set_mem_enable(cxlds, 0); - info->mem_enabled = 0; + if (!allowed && info->mem_enabled) { + dev_err(dev, "Range register decodes outside platform defined CXL ranges.\n"); + return -ENXIO; }
/*
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin K. Petersen martin.petersen@oracle.com
commit 321da3dc1f3c92a12e3c5da934090d2992a8814c upstream.
It has been observed that some USB/UAS devices return generic properties hardcoded in firmware for mode pages for a period of time after a device has been discovered. The reported properties are either garbage or they do not accurately reflect the characteristics of the physical storage device attached in the case of a bridge.
Prior to commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") we would call revalidate several times during device discovery. As a result, incorrect values would eventually get replaced with ones accurately describing the attached storage. When we did away with the redundant revalidate pass, several cases were reported where devices reported nonsensical values or would end up in write-protected state.
An initial attempt at addressing this issue involved introducing a delayed second revalidate invocation. However, this approach still left some devices reporting incorrect characteristics.
Tasos Sahanidis debugged the problem further and identified that introducing a READ operation prior to MODE SENSE fixed the problem and that it wasn't a timing issue. Issuing a READ appears to cause the devices to update their state to reflect the actual properties of the storage media. Device properties like vendor, model, and storage capacity appear to be correctly reported from the get-go. It is unclear why these devices defer populating the remaining characteristics.
Match the behavior of a well known commercial operating system and trigger a READ operation prior to querying device characteristics to force the device to populate the mode pages.
The additional READ is triggered by a flag set in the USB storage and UAS drivers. We avoid issuing the READ for other transport classes since some storage devices identify Linux through our particular discovery command sequence.
Link: https://lore.kernel.org/r/20240213143306.2194237-1-martin.petersen@oracle.co... Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") Cc: stable@vger.kernel.org Reported-by: Tasos Sahanidis tasos@tasossah.com Reviewed-by: Ewan D. Milne emilne@redhat.com Reviewed-by: Bart Van Assche bvanassche@acm.org Tested-by: Tasos Sahanidis tasos@tasossah.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/sd.c | 26 +++++++++++++++++++++++++- drivers/usb/storage/scsiglue.c | 7 +++++++ drivers/usb/storage/uas.c | 7 +++++++ include/scsi/scsi_device.h | 1 + 4 files changed, 40 insertions(+), 1 deletion(-)
--- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3410,6 +3410,24 @@ static bool sd_validate_opt_xfer_size(st return true; }
+static void sd_read_block_zero(struct scsi_disk *sdkp) +{ + unsigned int buf_len = sdkp->device->sector_size; + char *buffer, cmd[10] = { }; + + buffer = kmalloc(buf_len, GFP_KERNEL); + if (!buffer) + return; + + cmd[0] = READ_10; + put_unaligned_be32(0, &cmd[2]); /* Logical block address 0 */ + put_unaligned_be16(1, &cmd[7]); /* Transfer 1 logical block */ + + scsi_execute_cmd(sdkp->device, cmd, REQ_OP_DRV_IN, buffer, buf_len, + SD_TIMEOUT, sdkp->max_retries, NULL); + kfree(buffer); +} + /** * sd_revalidate_disk - called the first time a new disk is seen, * performs disk spin up, read_capacity, etc. @@ -3449,7 +3467,13 @@ static int sd_revalidate_disk(struct gen */ if (sdkp->media_present) { sd_read_capacity(sdkp, buffer); - + /* + * Some USB/UAS devices return generic values for mode pages + * until the media has been accessed. Trigger a READ operation + * to force the device to populate mode pages. + */ + if (sdp->read_before_ms) + sd_read_block_zero(sdkp); /* * set the default to rotational. All non-rotational devices * support the block characteristics VPD page, which will --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -180,6 +180,13 @@ static int slave_configure(struct scsi_d sdev->use_192_bytes_for_3f = 1;
/* + * Some devices report generic values until the media has been + * accessed. Force a READ(10) prior to querying device + * characteristics. + */ + sdev->read_before_ms = 1; + + /* * Some devices don't like MODE SENSE with page=0x3f, * which is the command used for checking if a device * is write-protected. Now that we tell the sd driver --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -879,6 +879,13 @@ static int uas_slave_configure(struct sc sdev->guess_capacity = 1;
/* + * Some devices report generic values until the media has been + * accessed. Force a READ(10) prior to querying device + * characteristics. + */ + sdev->read_before_ms = 1; + + /* * Some devices don't like MODE SENSE with page=0x3f, * which is the command used for checking if a device * is write-protected. Now that we tell the sd driver --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -208,6 +208,7 @@ struct scsi_device { unsigned use_10_for_rw:1; /* first try 10-byte read / write */ unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */ unsigned set_dbd_for_ms:1; /* Set "DBD" field in mode sense */ + unsigned read_before_ms:1; /* perform a READ before MODE SENSE */ unsigned no_report_opcodes:1; /* no REPORT SUPPORTED OPERATION CODES */ unsigned no_write_same:1; /* no WRITE SAME command */ unsigned use_16_for_rw:1; /* Use read/write(16) over read/write(10) */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Naohiro Aota naohiro.aota@wdc.com
commit de959094eb2197636f7c803af0943cb9d3b35804 upstream.
As of commit 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit() and kfree(). That is not done properly for the error case, hitting WARN and NULL pointer dereference in bio_free().
Fixes: 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper") CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Naohiro Aota naohiro.aota@wdc.com Link: https://lore.kernel.org/r/20240214144356.101814-1-naohiro.aota@wdc.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/target/target_core_pscsi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
--- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -907,12 +907,15 @@ new_bio:
return 0; fail: - if (bio) - bio_put(bio); + if (bio) { + bio_uninit(bio); + kfree(bio); + } while (req->bio) { bio = req->bio; req->bio = bio->bi_next; - bio_put(bio); + bio_uninit(bio); + kfree(bio); } req->biotail = NULL; return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin K. Petersen martin.petersen@oracle.com
commit b5fc07a5fb56216a49e6c1d0b172d5464d99a89b upstream.
Commit c92a6b5d6335 ("scsi: core: Query VPD size before getting full page") removed the logic which checks whether a VPD page is present on the supported pages list before asking for the page itself. That was done because SPC helpfully states "The Supported VPD Pages VPD page list may or may not include all the VPD pages that are able to be returned by the device server". Testing had revealed a few devices that supported some of the 0xBn pages but didn't actually list them in page 0.
Julian Sikorski bisected a problem with his drive resetting during discovery to the commit above. As it turns out, this particular drive firmware will crash if we attempt to fetch page 0xB9.
Various approaches were attempted to work around this. In the end, reinstating the logic that consults VPD page 0 before fetching any other page was the path of least resistance. A firmware update for the devices which originally compelled us to remove the check has since been released.
Link: https://lore.kernel.org/r/20240214221411.2888112-1-martin.petersen@oracle.co... Fixes: c92a6b5d6335 ("scsi: core: Query VPD size before getting full page") Cc: stable@vger.kernel.org Cc: Bart Van Assche bvanassche@acm.org Reported-by: Julian Sikorski belegdol@gmail.com Tested-by: Julian Sikorski belegdol@gmail.com Reviewed-by: Lee Duncan lee.duncan@suse.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/scsi.c | 22 ++++++++++++++++++++-- include/scsi/scsi_device.h | 4 ---- 2 files changed, 20 insertions(+), 6 deletions(-)
--- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -328,21 +328,39 @@ static int scsi_vpd_inquiry(struct scsi_ return result + 4; }
+enum scsi_vpd_parameters { + SCSI_VPD_HEADER_SIZE = 4, + SCSI_VPD_LIST_SIZE = 36, +}; + static int scsi_get_vpd_size(struct scsi_device *sdev, u8 page) { - unsigned char vpd_header[SCSI_VPD_HEADER_SIZE] __aligned(4); + unsigned char vpd[SCSI_VPD_LIST_SIZE] __aligned(4); int result;
if (sdev->no_vpd_size) return SCSI_DEFAULT_VPD_LEN;
/* + * Fetch the supported pages VPD and validate that the requested page + * number is present. + */ + if (page != 0) { + result = scsi_vpd_inquiry(sdev, vpd, 0, sizeof(vpd)); + if (result < SCSI_VPD_HEADER_SIZE) + return 0; + + result -= SCSI_VPD_HEADER_SIZE; + if (!memchr(&vpd[SCSI_VPD_HEADER_SIZE], page, result)) + return 0; + } + /* * Fetch the VPD page header to find out how big the page * is. This is done to prevent problems on legacy devices * which can not handle allocation lengths as large as * potentially requested by the caller. */ - result = scsi_vpd_inquiry(sdev, vpd_header, page, sizeof(vpd_header)); + result = scsi_vpd_inquiry(sdev, vpd, page, SCSI_VPD_HEADER_SIZE); if (result < 0) return 0;
--- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -100,10 +100,6 @@ struct scsi_vpd { unsigned char data[]; };
-enum scsi_vpd_parameters { - SCSI_VPD_HEADER_SIZE = 4, -}; - struct scsi_device { struct Scsi_Host *host; struct request_queue *request_queue;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Terry Tritton terry.tritton@linaro.org
commit 7efa6f2c803366f84c3c362f01e822490669d72b upstream.
If HUGETLBFS is not enabled then the default_huge_page_size function will return 0 and cause a divide by 0 error. Add a check to see if the huge page size is 0 and skip the hugetlb tests if it is.
Link: https://lkml.kernel.org/r/20240205145055.3545806-2-terry.tritton@linaro.org Fixes: 16a45b57cbf2 ("selftests/mm: add framework for uffd-unit-test") Signed-off-by: Terry Tritton terry.tritton@linaro.org Cc: Peter Griffin peter.griffin@linaro.org Cc: Shuah Khan shuah@kernel.org Cc: Peter Xu peterx@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/mm/uffd-unit-tests.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/tools/testing/selftests/mm/uffd-unit-tests.c +++ b/tools/testing/selftests/mm/uffd-unit-tests.c @@ -1309,6 +1309,12 @@ int main(int argc, char *argv[]) continue;
uffd_test_start("%s on %s", test->name, mem_type->name); + if ((mem_type->mem_flag == MEM_HUGETLB || + mem_type->mem_flag == MEM_HUGETLB_PRIVATE) && + (default_huge_page_size() == 0)) { + uffd_test_skip("huge page size is 0, feature missing?"); + continue; + } if (!uffd_feature_supported(test)) { uffd_test_skip("feature missing"); continue;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kairui Song kasong@tencent.com
commit 13ddaf26be324a7f951891ecd9ccd04466d27458 upstream.
When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption.
One possible callstack is like this:
CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed!
And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss.
To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked.
Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead")
Reproducer:
This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]:
With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss!
This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise.
The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production.
After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed.
Performance overhead is minimal, microbenchmark swapin 10G from 32G zram:
Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)
[kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" ying.huang@intel.com Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.... Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song kasong@tencent.com Reviewed-by: "Huang, Ying" ying.huang@intel.com Acked-by: Yu Zhao yuzhao@google.com Acked-by: David Hildenbrand david@redhat.com Acked-by: Chris Li chrisl@kernel.org Cc: Hugh Dickins hughd@google.com Cc: Johannes Weiner hannes@cmpxchg.org Cc: Matthew Wilcox (Oracle) willy@infradead.org Cc: Michal Hocko mhocko@suse.com Cc: Minchan Kim minchan@kernel.org Cc: Yosry Ahmed yosryahmed@google.com Cc: Yu Zhao yuzhao@google.com Cc: Barry Song 21cnbao@gmail.com Cc: SeongJae Park sj@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/swap.h | 5 +++++ mm/memory.c | 20 ++++++++++++++++++++ mm/swap.h | 5 +++++ mm/swapfile.c | 13 +++++++++++++ 4 files changed, 43 insertions(+)
--- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -553,6 +553,11 @@ static inline int swap_duplicate(swp_ent return 0; }
+static inline int swapcache_prepare(swp_entry_t swp) +{ + return 0; +} + static inline void swap_free(swp_entry_t swp) { } --- a/mm/memory.c +++ b/mm/memory.c @@ -3785,6 +3785,7 @@ vm_fault_t do_swap_page(struct vm_fault struct page *page; struct swap_info_struct *si = NULL; rmap_t rmap_flags = RMAP_NONE; + bool need_clear_cache = false; bool exclusive = false; swp_entry_t entry; pte_t pte; @@ -3853,6 +3854,20 @@ vm_fault_t do_swap_page(struct vm_fault if (!folio) { if (data_race(si->flags & SWP_SYNCHRONOUS_IO) && __swap_count(entry) == 1) { + /* + * Prevent parallel swapin from proceeding with + * the cache flag. Otherwise, another thread may + * finish swapin first, free the entry, and swapout + * reusing the same entry. It's undetectable as + * pte_same() returns true due to entry reuse. + */ + if (swapcache_prepare(entry)) { + /* Relax a bit to prevent rapid repeated page faults */ + schedule_timeout_uninterruptible(1); + goto out; + } + need_clear_cache = true; + /* skip swapcache */ folio = vma_alloc_folio(GFP_HIGHUSER_MOVABLE, 0, vma, vmf->address, false); @@ -4099,6 +4114,9 @@ unlock: if (vmf->pte) pte_unmap_unlock(vmf->pte, vmf->ptl); out: + /* Clear the swap cache pin for direct swapin after PTL unlock */ + if (need_clear_cache) + swapcache_clear(si, entry); if (si) put_swap_device(si); return ret; @@ -4113,6 +4131,8 @@ out_release: folio_unlock(swapcache); folio_put(swapcache); } + if (need_clear_cache) + swapcache_clear(si, entry); if (si) put_swap_device(si); return ret; --- a/mm/swap.h +++ b/mm/swap.h @@ -40,6 +40,7 @@ void __delete_from_swap_cache(struct fol void delete_from_swap_cache(struct folio *folio); void clear_shadow_from_swap_cache(int type, unsigned long begin, unsigned long end); +void swapcache_clear(struct swap_info_struct *si, swp_entry_t entry); struct folio *swap_cache_get_folio(swp_entry_t entry, struct vm_area_struct *vma, unsigned long addr); struct folio *filemap_get_incore_folio(struct address_space *mapping, @@ -97,6 +98,10 @@ static inline int swap_writepage(struct return 0; }
+static inline void swapcache_clear(struct swap_info_struct *si, swp_entry_t entry) +{ +} + static inline struct folio *swap_cache_get_folio(swp_entry_t entry, struct vm_area_struct *vma, unsigned long addr) { --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -3363,6 +3363,19 @@ int swapcache_prepare(swp_entry_t entry) return __swap_duplicate(entry, SWAP_HAS_CACHE); }
+void swapcache_clear(struct swap_info_struct *si, swp_entry_t entry) +{ + struct swap_cluster_info *ci; + unsigned long offset = swp_offset(entry); + unsigned char usage; + + ci = lock_cluster_or_swap_info(si, offset); + usage = __swap_entry_free_locked(si, offset, SWAP_HAS_CACHE); + unlock_cluster_or_swap_info(si, ci); + if (!usage) + free_swap_slot(entry); +} + struct swap_info_struct *swp_swap_info(swp_entry_t entry) { return swap_type_to_swap_info(swp_type(entry));
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: SeongJae Park sj@kernel.org
commit 13d0599ab3b2ff17f798353f24bcbef1659d3cfc upstream.
For online parameters change, DAMON_LRU_SORT creates new schemes based on latest values of the parameters and replaces the old schemes with the new one. When creating it, the internal status of the quotas of the old schemes is not preserved. As a result, charging of the quota starts from zero after the online tuning. The data that collected to estimate the throughput of the scheme's action is also reset, and therefore the estimation should start from the scratch again. Because the throughput estimation is being used to convert the time quota to the effective size quota, this could result in temporal time quota inaccuracy. It would be recovered over time, though. In short, the quota accuracy could be temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-3-sj@kernel.org Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting") Signed-off-by: SeongJae Park sj@kernel.org Cc: stable@vger.kernel.org [6.0+] Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/damon/lru_sort.c | 43 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 7 deletions(-)
--- a/mm/damon/lru_sort.c +++ b/mm/damon/lru_sort.c @@ -185,9 +185,21 @@ static struct damos *damon_lru_sort_new_ return damon_lru_sort_new_scheme(&pattern, DAMOS_LRU_DEPRIO); }
+static void damon_lru_sort_copy_quota_status(struct damos_quota *dst, + struct damos_quota *src) +{ + dst->total_charged_sz = src->total_charged_sz; + dst->total_charged_ns = src->total_charged_ns; + dst->charged_sz = src->charged_sz; + dst->charged_from = src->charged_from; + dst->charge_target_from = src->charge_target_from; + dst->charge_addr_from = src->charge_addr_from; +} + static int damon_lru_sort_apply_parameters(void) { - struct damos *scheme; + struct damos *scheme, *hot_scheme, *cold_scheme; + struct damos *old_hot_scheme = NULL, *old_cold_scheme = NULL; unsigned int hot_thres, cold_thres; int err = 0;
@@ -195,18 +207,35 @@ static int damon_lru_sort_apply_paramete if (err) return err;
+ damon_for_each_scheme(scheme, ctx) { + if (!old_hot_scheme) { + old_hot_scheme = scheme; + continue; + } + old_cold_scheme = scheme; + } + hot_thres = damon_max_nr_accesses(&damon_lru_sort_mon_attrs) * hot_thres_access_freq / 1000; - scheme = damon_lru_sort_new_hot_scheme(hot_thres); - if (!scheme) + hot_scheme = damon_lru_sort_new_hot_scheme(hot_thres); + if (!hot_scheme) return -ENOMEM; - damon_set_schemes(ctx, &scheme, 1); + if (old_hot_scheme) + damon_lru_sort_copy_quota_status(&hot_scheme->quota, + &old_hot_scheme->quota);
cold_thres = cold_min_age / damon_lru_sort_mon_attrs.aggr_interval; - scheme = damon_lru_sort_new_cold_scheme(cold_thres); - if (!scheme) + cold_scheme = damon_lru_sort_new_cold_scheme(cold_thres); + if (!cold_scheme) { + damon_destroy_scheme(hot_scheme); return -ENOMEM; - damon_add_scheme(ctx, scheme); + } + if (old_cold_scheme) + damon_lru_sort_copy_quota_status(&cold_scheme->quota, + &old_cold_scheme->quota); + + damon_set_schemes(ctx, &hot_scheme, 1); + damon_add_scheme(ctx, cold_scheme);
return damon_set_region_biggest_system_ram_default(target, &monitor_region_start,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Weiner hannes@cmpxchg.org
commit 118642d7f606fc9b9c92ee611275420320290ffb upstream.
The swapaccount deprecation warning is throwing false positives. Since we deprecated the knob and defaulted to enabling, the only reports we've been getting are from folks that set swapaccount=1. While this is a nice affirmation that always-enabling was the right choice, we certainly don't want to warn when users request the supported mode.
Only warn when disabling is requested, and clarify the warning.
[colin.i.king@gmail.com: spelling: "commdandline" -> "commandline"] Link: https://lkml.kernel.org/r/20240215090544.1649201-1-colin.i.king@gmail.com Link: https://lkml.kernel.org/r/20240213081634.3652326-1-hannes@cmpxchg.org Fixes: b25806dcd3d5 ("mm: memcontrol: deprecate swapaccounting=0 mode") Signed-off-by: Colin Ian King colin.i.king@gmail.com Reported-by: "Jonas Schäfer" jonas@wielicki.name Reported-by: Narcis Garcia debianlists@actiu.net Suggested-by: Yosry Ahmed yosryahmed@google.com Signed-off-by: Johannes Weiner hannes@cmpxchg.org Reviewed-by: Yosry Ahmed yosryahmed@google.com Acked-by: Michal Hocko mhocko@suse.com Acked-by: Shakeel Butt shakeelb@google.com Cc: Roman Gushchin roman.gushchin@linux.dev Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/memcontrol.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
--- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -7905,9 +7905,13 @@ bool mem_cgroup_swap_full(struct folio *
static int __init setup_swap_account(char *s) { - pr_warn_once("The swapaccount= commandline option is deprecated. " - "Please report your usecase to linux-mm@kvack.org if you " - "depend on this functionality.\n"); + bool res; + + if (!kstrtobool(s, &res) && !res) + pr_warn_once("The swapaccount=0 commandline option is deprecated " + "in favor of configuring swap control via cgroupfs. " + "Please report your usecase to linux-mm@kvack.org if you " + "depend on this functionality.\n"); return 1; } __setup("swapaccount=", setup_swap_account);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: SeongJae Park sj@kernel.org
commit e9e3db69966d5e9e6f7e7d017b407c0025180fe5 upstream.
kdamond_apply_schemes() checks apply intervals of schemes and avoid further applying any schemes if no scheme passed its apply interval. However, the following schemes applying function, damon_do_apply_schemes() iterates all schemes without the apply interval check. As a result, the shortest apply interval is applied to all schemes. Fix the problem by checking the apply interval in damon_do_apply_schemes().
Link: https://lkml.kernel.org/r/20240205201306.88562-1-sj@kernel.org Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval") Signed-off-by: SeongJae Park sj@kernel.org Cc: stable@vger.kernel.org [6.7.x] Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/damon/core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
--- a/mm/damon/core.c +++ b/mm/damon/core.c @@ -1026,6 +1026,9 @@ static void damon_do_apply_schemes(struc damon_for_each_scheme(s, c) { struct damos_quota *quota = &s->quota;
+ if (c->passed_sample_intervals != s->next_apply_sis) + continue; + if (!s->wmarks.activated) continue;
@@ -1126,10 +1129,6 @@ static void kdamond_apply_schemes(struct if (c->passed_sample_intervals != s->next_apply_sis) continue;
- s->next_apply_sis += - (s->apply_interval_us ? s->apply_interval_us : - c->attrs.aggr_interval) / sample_interval; - if (!s->wmarks.activated) continue;
@@ -1145,6 +1144,14 @@ static void kdamond_apply_schemes(struct damon_for_each_region_safe(r, next_r, t) damon_do_apply_schemes(c, t, r); } + + damon_for_each_scheme(s, c) { + if (c->passed_sample_intervals != s->next_apply_sis) + continue; + s->next_apply_sis += + (s->apply_interval_us ? s->apply_interval_us : + c->attrs.aggr_interval) / sample_interval; + } }
/*
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: SeongJae Park sj@kernel.org
commit 1b0ca4e4ff10a2c8402e2cf70132c683e1c772e4 upstream.
Patch series "mm/damon: fix quota status loss due to online tunings".
DAMON_RECLAIM and DAMON_LRU_SORT is not preserving internal quota status when applying new user parameters, and hence could cause temporal quota accuracy degradation. Fix it by preserving the status.
This patch (of 2):
For online parameters change, DAMON_RECLAIM creates new scheme based on latest values of the parameters and replaces the old scheme with the new one. When creating it, the internal status of the quota of the old scheme is not preserved. As a result, charging of the quota starts from zero after the online tuning. The data that collected to estimate the throughput of the scheme's action is also reset, and therefore the estimation should start from the scratch again. Because the throughput estimation is being used to convert the time quota to the effective size quota, this could result in temporal time quota inaccuracy. It would be recovered over time, though. In short, the quota accuracy could be temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-1-sj@kernel.org Link: https://lkml.kernel.org/r/20240216194025.9207-2-sj@kernel.org Fixes: e035c280f6df ("mm/damon/reclaim: support online inputs update") Signed-off-by: SeongJae Park sj@kernel.org Cc: stable@vger.kernel.org [5.19+] Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/damon/reclaim.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
--- a/mm/damon/reclaim.c +++ b/mm/damon/reclaim.c @@ -150,9 +150,20 @@ static struct damos *damon_reclaim_new_s &damon_reclaim_wmarks); }
+static void damon_reclaim_copy_quota_status(struct damos_quota *dst, + struct damos_quota *src) +{ + dst->total_charged_sz = src->total_charged_sz; + dst->total_charged_ns = src->total_charged_ns; + dst->charged_sz = src->charged_sz; + dst->charged_from = src->charged_from; + dst->charge_target_from = src->charge_target_from; + dst->charge_addr_from = src->charge_addr_from; +} + static int damon_reclaim_apply_parameters(void) { - struct damos *scheme; + struct damos *scheme, *old_scheme; struct damos_filter *filter; int err = 0;
@@ -164,6 +175,11 @@ static int damon_reclaim_apply_parameter scheme = damon_reclaim_new_scheme(); if (!scheme) return -ENOMEM; + if (!list_empty(&ctx->schemes)) { + damon_for_each_scheme(old_scheme, ctx) + damon_reclaim_copy_quota_status(&scheme->quota, + &old_scheme->quota); + } if (skip_anon) { filter = damos_new_filter(DAMOS_FILTER_TYPE_ANON, true); if (!filter) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Anshuman Khandual anshuman.khandual@arm.com
commit 4f155af0ae4464134bfcfd9f043b6b727c84e947 upstream.
The commit 77e6c43e137c ("memblock: introduce MEMBLOCK_RSRV_NOINIT flag") skipped adding this newly introduced memblock flag into flagname[] array, thus preventing a correct memblock flags output for applicable memblock regions.
Link: https://lkml.kernel.org/r/20240209030912.1382251-1-anshuman.khandual@arm.com Fixes: 77e6c43e137c ("memblock: introduce MEMBLOCK_RSRV_NOINIT flag") Signed-off-by: Anshuman Khandual anshuman.khandual@arm.com Reviewed-by: Mike Rapoport rppt@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/memblock.c | 1 + 1 file changed, 1 insertion(+)
--- a/mm/memblock.c +++ b/mm/memblock.c @@ -2214,6 +2214,7 @@ static const char * const flagname[] = { [ilog2(MEMBLOCK_MIRROR)] = "MIRROR", [ilog2(MEMBLOCK_NOMAP)] = "NOMAP", [ilog2(MEMBLOCK_DRIVER_MANAGED)] = "DRV_MNG", + [ilog2(MEMBLOCK_RSRV_NOINIT)] = "RSV_NIT", };
static int memblock_debug_show(struct seq_file *m, void *private)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit bd8905d70944aae5063fd91c667e6f846ee92718 upstream.
After commit 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs") the touchscreen in the keyboard half of the Lenovo Yogabook1 X90 stopped working with the following error:
Goodix-TS i2c-goodix_ts: error -EBUSY: Failed to get irq GPIO
The problem is that when getting the IRQ for instantiated i2c_client-s from a GPIO (rather then using an IRQ directly from the IOAPIC), x86_acpi_irq_helper_get() now properly requests the GPIO, which disallows other drivers from requesting it. Normally this is a good thing, but the goodix touchscreen also uses the IRQ as an output during reset to select which of its 2 possible I2C addresses should be used.
Add a new free_gpio flag to struct x86_acpi_irq_data to deal with this and release the GPIO after getting the IRQ in this special case.
Fixes: 4014ae236b1d ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20240216201721.239791-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/platform/x86/x86-android-tablets/core.c | 3 +++ drivers/platform/x86/x86-android-tablets/lenovo.c | 1 + drivers/platform/x86/x86-android-tablets/x86-android-tablets.h | 1 + 3 files changed, 5 insertions(+)
--- a/drivers/platform/x86/x86-android-tablets/core.c +++ b/drivers/platform/x86/x86-android-tablets/core.c @@ -113,6 +113,9 @@ int x86_acpi_irq_helper_get(const struct if (irq_type != IRQ_TYPE_NONE && irq_type != irq_get_trigger_type(irq)) irq_set_irq_type(irq, irq_type);
+ if (data->free_gpio) + devm_gpiod_put(&x86_android_tablet_device->dev, gpiod); + return irq; case X86_ACPI_IRQ_TYPE_PMIC: status = acpi_get_handle(NULL, data->chip, &handle); --- a/drivers/platform/x86/x86-android-tablets/lenovo.c +++ b/drivers/platform/x86/x86-android-tablets/lenovo.c @@ -96,6 +96,7 @@ static const struct x86_i2c_client_info .trigger = ACPI_EDGE_SENSITIVE, .polarity = ACPI_ACTIVE_LOW, .con_id = "goodix_ts_irq", + .free_gpio = true, }, }, { /* Wacom Digitizer in keyboard half */ --- a/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h +++ b/drivers/platform/x86/x86-android-tablets/x86-android-tablets.h @@ -38,6 +38,7 @@ struct x86_acpi_irq_data { int index; int trigger; /* ACPI_EDGE_SENSITIVE / ACPI_LEVEL_SENSITIVE */ int polarity; /* ACPI_ACTIVE_HIGH / ACPI_ACTIVE_LOW / ACPI_ACTIVE_BOTH */ + bool free_gpio; /* Release GPIO after getting IRQ (for TYPE_GPIOINT) */ const char *con_id; };
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit 84c16d01ff219bc0a5dca5219db6b8b86a6854fb upstream.
Commit 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing tablet-mode-switch events") causes 2 issues on the ThinkPad X1 Tablet Gen2:
1. The ThinkPad will wake up immediately from suspend 2. When put in tablet mode SW_TABLET_MODE reverts to 0 after about 1 second
Both these issues are caused by the "VBDL" ACPI method call added at the end of the notify_handler.
And it never became entirely clear if this call is even necessary to fix the issue of missing tablet-mode-switch events on the Dell Inspiron 7352.
Drop the "VBDL" ACPI method call again to fix the 2 issues this is causing on the ThinkPad X1 Tablet Gen2.
Fixes: 14c200b7ca46 ("platform/x86: intel-vbtn: Fix missing tablet-mode-switch events") Reported-by: Alexander Kobel a-kobel@a-kobel.de Closes: https://lore.kernel.org/platform-driver-x86/295984ce-bd4b-49bd-adc5-ffe7c898... Cc: regressions@lists.linux.dev Cc: Arnold Gozum arngozum@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede hdegoede@redhat.com Tested-by: Alexander Kobel a-kobel@a-kobel.de Link: https://lore.kernel.org/r/20240216203300.245826-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/platform/x86/intel/vbtn.c | 3 --- 1 file changed, 3 deletions(-)
--- a/drivers/platform/x86/intel/vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -200,9 +200,6 @@ static void notify_handler(acpi_handle h autorelease = val && (!ke_rel || ke_rel->type == KE_IGNORE);
sparse_keymap_report_event(input_dev, event, val, autorelease); - - /* Some devices need this to report further events */ - acpi_evaluate_object(handle, "VBDL", NULL, NULL); }
/*
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit dbcbfd662a725641d118fb3ae5ffb7be4e3d0fb0 upstream.
On some devices the ACPI name of the touchscreen is e.g. either MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial commit's ts_data uses "MSSL1680:00" but the tablets from the github issue and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts() check to allow using a partial match on just the ACPI HID of "MSSL1680" and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was necessary since the ACPI names used are never more then 11 chars and I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet") Closes: https://github.com/onitake/gsl-firmware/issues/91 Cc: stable@vger.kernel.org Reviewed-by: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/platform/x86/touchscreen_dmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -81,7 +81,7 @@ static const struct property_entry chuwi };
static const struct ts_dmi_data chuwi_hi8_air_data = { - .acpi_name = "MSSL1680:00", + .acpi_name = "MSSL1680", .properties = chuwi_hi8_air_props, };
@@ -1821,7 +1821,7 @@ static void ts_dmi_add_props(struct i2c_ int error;
if (has_acpi_companion(dev) && - !strncmp(ts_data->acpi_name, client->name, I2C_NAME_SIZE)) { + strstarts(client->name, ts_data->acpi_name)) { error = device_create_managed_software_node(dev, ts_data->properties, NULL); if (error) dev_err(dev, "failed to add properties: %d\n", error);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li libaokun1@huawei.com
commit e21a2f17566cbd64926fb8f16323972f7a064444 upstream.
The following memory leak was reported after unbinding /dev/cachefiles:
================================================================== unreferenced object 0xffff9b674176e3c0 (size 192): comm "cachefilesd2", pid 680, jiffies 4294881224 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc ea38a44b): [<ffffffff8eb8a1a5>] kmem_cache_alloc+0x2d5/0x370 [<ffffffff8e917f86>] prepare_creds+0x26/0x2e0 [<ffffffffc002eeef>] cachefiles_determine_cache_security+0x1f/0x120 [<ffffffffc00243ec>] cachefiles_add_cache+0x13c/0x3a0 [<ffffffffc0025216>] cachefiles_daemon_write+0x146/0x1c0 [<ffffffff8ebc4a3b>] vfs_write+0xcb/0x520 [<ffffffff8ebc5069>] ksys_write+0x69/0xf0 [<ffffffff8f6d4662>] do_syscall_64+0x72/0x140 [<ffffffff8f8000aa>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 ==================================================================
Put the reference count of cache_cred in cachefiles_daemon_unbind() to fix the problem. And also put cache_cred in cachefiles_add_cache() error branch to avoid memory leaks.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") CC: stable@vger.kernel.org Signed-off-by: Baokun Li libaokun1@huawei.com Link: https://lore.kernel.org/r/20240217081431.796809-1-libaokun1@huawei.com Acked-by: David Howells dhowells@redhat.com Reviewed-by: Jingbo Xu jefflexu@linux.alibaba.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/cachefiles/cache.c | 2 ++ fs/cachefiles/daemon.c | 1 + 2 files changed, 3 insertions(+)
--- a/fs/cachefiles/cache.c +++ b/fs/cachefiles/cache.c @@ -168,6 +168,8 @@ error_unsupported: dput(root); error_open_root: cachefiles_end_secure(cache, saved_cred); + put_cred(cache->cache_cred); + cache->cache_cred = NULL; error_getsec: fscache_relinquish_cache(cache_cookie); cache->cache = NULL; --- a/fs/cachefiles/daemon.c +++ b/fs/cachefiles/daemon.c @@ -805,6 +805,7 @@ static void cachefiles_daemon_unbind(str cachefiles_put_directory(cache->graveyard); cachefiles_put_directory(cache->store); mntput(cache->mnt); + put_cred(cache->cache_cred);
kfree(cache->rootdirname); kfree(cache->secctx);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Javier Martinez Canillas javierm@redhat.com
commit ed683b9bb91fc274383e222ba5873a9ee9033462 upstream.
Commit 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols") added a new FB_CORE Kconfig symbol, that can be enabled to only have fbcon/VT and DRM fbdev emulation, but without support for any legacy fbdev driver.
Unfortunately, it missed to change the CONFIG_FB in arch/sparc makefiles, which leads to the following linking error in some sparc64 configurations:
sparc64-linux-ld: drivers/video/fbdev/core/fbcon.o: in function `fbcon_fb_registered':
fbcon.c:(.text+0x4f60): undefined reference to `fb_is_primary_device'
Fixes: 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols") Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/r/202401290306.IV8rhJ02-lkp@intel.com/ Signed-off-by: Javier Martinez Canillas javierm@redhat.com Reviewed-by: Thomas Zimmermann tzimmermann@suse.de Acked-by: Arnd Bergmann arnd@arndb.de Cc: stable@vger.kernel.org # v6.6+ Signed-off-by: Thomas Zimmermann tzimmermann@suse.de Link: https://patchwork.freedesktop.org/patch/msgid/20240220095428.3341195-1-javie... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/sparc/Makefile | 2 +- arch/sparc/video/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
--- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -60,7 +60,7 @@ libs-y += arch/sparc/pro libs-y += arch/sparc/lib/
drivers-$(CONFIG_PM) += arch/sparc/power/ -drivers-$(CONFIG_FB) += arch/sparc/video/ +drivers-$(CONFIG_FB_CORE) += arch/sparc/video/
boot := arch/sparc/boot
--- a/arch/sparc/video/Makefile +++ b/arch/sparc/video/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_FB) += fbdev.o +obj-$(CONFIG_FB_CORE) += fbdev.o
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai yukuai3@huawei.com
commit 1baae052cccd08daf9a9d64c3f959d8cdb689757 upstream.
mddev_suspend() never stop sync_thread, hence it doesn't make sense to ignore suspended array in md_check_recovery(), which might cause sync_thread can't be unregistered.
After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh:
1) suspend the array: raid_postsuspend mddev_suspend
2) stop the array: raid_dtr md_stop __md_stop_writes stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
3) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread);
4) daemon thread can't unregister sync thread: md_check_recovery if (mddev->suspended) return; -> return directly md_read_sync_thread clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery); -> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang;
This problem is not just related to dm-raid, fix it by ignoring suspended array in md_check_recovery(). And follow up patches will improve dm-raid better to frozen sync thread during suspend.
Reported-by: Mikulas Patocka mpatocka@redhat.com Closes: https://lore.kernel.org/all/8fb335e-6d2c-dbb5-d7-ded8db5145a@redhat.com/ Fixes: 68866e425be2 ("MD: no sync IO while suspended") Fixes: f52f5c71f3d4 ("md: fix stopping sync thread") Cc: stable@vger.kernel.org # v6.7+ Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Song Liu song@kernel.org Link: https://lore.kernel.org/r/20240201092559.910982-2-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 3 --- 1 file changed, 3 deletions(-)
--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -9519,9 +9519,6 @@ not_running: */ void md_check_recovery(struct mddev *mddev) { - if (READ_ONCE(mddev->suspended)) - return; - if (mddev->bitmap) md_bitmap_daemon_work(mddev);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai yukuai3@huawei.com
commit 55a48ad2db64737f7ffc0407634218cc6e4c513b upstream.
Usually if the array is not read-write, md_check_recovery() won't register new sync_thread in the first place. And if the array is read-write and sync_thread is registered, md_set_readonly() will unregister sync_thread before setting the array read-only. md/raid follow this behavior hence there is no problem.
After commit f52f5c71f3d4 ("md: fix stopping sync thread"), following hang can be triggered by test shell/integrity-caching.sh:
1) array is read-only. dm-raid update super block: rs_update_sbs ro = mddev->ro mddev->ro = 0 -> set array read-write md_update_sb
2) register new sync thread concurrently.
3) dm-raid set array back to read-only: rs_update_sbs mddev->ro = ro
4) stop the array: raid_dtr md_stop stop_sync_thread set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread_directly(mddev->sync_thread); wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
5) sync thread done: md_do_sync set_bit(MD_RECOVERY_DONE, &mddev->recovery); md_wakeup_thread(mddev->thread);
6) daemon thread can't unregister sync thread: md_check_recovery if (!md_is_rdwr(mddev) && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) return; -> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang;
The root cause is that dm-raid manipulate 'mddev->ro' by itself, however, dm-raid really should stop sync thread before setting the array read-only. Unfortunately, I need to read more code before I can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix the problem the easy way for now to prevent dm-raid regression.
Reported-by: Mikulas Patocka mpatocka@redhat.com Closes: https://lore.kernel.org/all/9801e40-8ac7-e225-6a71-309dcf9dc9aa@redhat.com/ Fixes: ecbfb9f118bc ("dm raid: add raid level takeover support") Fixes: f52f5c71f3d4 ("md: fix stopping sync thread") Cc: stable@vger.kernel.org # v6.7+ Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Song Liu song@kernel.org Link: https://lore.kernel.org/r/20240201092559.910982-3-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-)
--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -9495,6 +9495,20 @@ not_running: sysfs_notify_dirent_safe(mddev->sysfs_action); }
+static void unregister_sync_thread(struct mddev *mddev) +{ + if (!test_bit(MD_RECOVERY_DONE, &mddev->recovery)) { + /* resync/recovery still happening */ + clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + return; + } + + if (WARN_ON_ONCE(!mddev->sync_thread)) + return; + + md_reap_sync_thread(mddev); +} + /* * This routine is regularly called by all per-raid-array threads to * deal with generic issues like resync and super-block update. @@ -9532,7 +9546,8 @@ void md_check_recovery(struct mddev *mdd }
if (!md_is_rdwr(mddev) && - !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) + !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) && + !test_bit(MD_RECOVERY_DONE, &mddev->recovery)) return; if ( ! ( (mddev->sb_flags & ~ (1<<MD_SB_CHANGE_PENDING)) || @@ -9554,8 +9569,7 @@ void md_check_recovery(struct mddev *mdd struct md_rdev *rdev;
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) { - /* sync_work already queued. */ - clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + unregister_sync_thread(mddev); goto unlock; }
@@ -9618,16 +9632,7 @@ void md_check_recovery(struct mddev *mdd * still set. */ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery)) { - if (!test_bit(MD_RECOVERY_DONE, &mddev->recovery)) { - /* resync/recovery still happening */ - clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - goto unlock; - } - - if (WARN_ON_ONCE(!mddev->sync_thread)) - goto unlock; - - md_reap_sync_thread(mddev); + unregister_sync_thread(mddev); goto unlock; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai yukuai3@huawei.com
commit 82ec0ae59d02e89164b24c0cc8e4e50de78b5fd6 upstream.
stop_sync_thread() will interrupt md_do_sync(), and md_do_sync() must set MD_RECOVERY_DONE, so that follow up md_check_recovery() will unregister sync_thread, clear MD_RECOVERY_RUNNING and wake up stop_sync_thread().
If MD_RECOVERY_WAIT is set or the array is read-only, md_do_sync() will return without setting MD_RECOVERY_DONE, and after commit f52f5c71f3d4 ("md: fix stopping sync thread"), dm-raid switch from md_reap_sync_thread() to stop_sync_thread() to unregister sync_thread from md_stop() and md_stop_writes(), causing the test shell/lvconvert-raid-reshape.sh hang.
We shouldn't switch back to md_reap_sync_thread() because it's problematic in the first place. Fix the problem by making sure md_do_sync() will set MD_RECOVERY_DONE.
Reported-by: Mikulas Patocka mpatocka@redhat.com Closes: https://lore.kernel.org/all/ece2b06f-d647-6613-a534-ff4c9bec1142@redhat.com/ Fixes: d5d885fd514f ("md: introduce new personality funciton start()") Fixes: 5fd6c1dce06e ("[PATCH] md: allow checkpoint of recovery with version-1 superblock") Fixes: f52f5c71f3d4 ("md: fix stopping sync thread") Cc: stable@vger.kernel.org # v6.7+ Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Song Liu song@kernel.org Link: https://lore.kernel.org/r/20240201092559.910982-4-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)
--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8813,12 +8813,16 @@ void md_do_sync(struct md_thread *thread int ret;
/* just incase thread restarts... */ - if (test_bit(MD_RECOVERY_DONE, &mddev->recovery) || - test_bit(MD_RECOVERY_WAIT, &mddev->recovery)) + if (test_bit(MD_RECOVERY_DONE, &mddev->recovery)) return; - if (!md_is_rdwr(mddev)) {/* never try to sync a read-only array */ + + if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) + goto skip; + + if (test_bit(MD_RECOVERY_WAIT, &mddev->recovery) || + !md_is_rdwr(mddev)) {/* never try to sync a read-only array */ set_bit(MD_RECOVERY_INTR, &mddev->recovery); - return; + goto skip; }
if (mddev_is_clustered(mddev)) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai yukuai3@huawei.com
commit ad39c08186f8a0f221337985036ba86731d6aafe upstream.
Currently, if reshape is interrupted, then reassemble the array will register sync_thread directly from pers->run(), in this case 'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee that md_do_sync() will be executed, hence stop_sync_thread() will hang because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE, however, following hang can still be triggered by dm-raid test shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly from raid10 and raid5. And let md_check_recovery() to register sync_thread.
Fixes: f67055780caa ("[PATCH] md: Checkpoint and allow restart of raid5 reshape") Fixes: f52f5c71f3d4 ("md: fix stopping sync thread") Cc: stable@vger.kernel.org # v6.7+ Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Song Liu song@kernel.org Link: https://lore.kernel.org/r/20240201092559.910982-5-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 5 ++++- drivers/md/raid10.c | 16 ++-------------- drivers/md/raid5.c | 29 ++--------------------------- 3 files changed, 8 insertions(+), 42 deletions(-)
--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -9422,6 +9422,7 @@ static void md_start_sync(struct work_st struct mddev *mddev = container_of(ws, struct mddev, sync_work); int spares = 0; bool suspend = false; + char *name;
if (md_spares_need_change(mddev)) suspend = true; @@ -9454,8 +9455,10 @@ static void md_start_sync(struct work_st if (spares) md_bitmap_write_all(mddev->bitmap);
+ name = test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) ? + "reshape" : "resync"; rcu_assign_pointer(mddev->sync_thread, - md_register_thread(md_do_sync, mddev, "resync")); + md_register_thread(md_do_sync, mddev, name)); if (!mddev->sync_thread) { pr_warn("%s: could not start resync thread...\n", mdname(mddev)); --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -4307,11 +4307,7 @@ static int raid10_run(struct mddev *mdde clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery); - set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - rcu_assign_pointer(mddev->sync_thread, - md_register_thread(md_do_sync, mddev, "reshape")); - if (!mddev->sync_thread) - goto out_free_conf; + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); }
return 0; @@ -4707,16 +4703,8 @@ out: clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); clear_bit(MD_RECOVERY_DONE, &mddev->recovery); set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery); - set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - - rcu_assign_pointer(mddev->sync_thread, - md_register_thread(md_do_sync, mddev, "reshape")); - if (!mddev->sync_thread) { - ret = -EAGAIN; - goto abort; - } + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); conf->reshape_checkpoint = jiffies; - md_wakeup_thread(mddev->sync_thread); md_new_event(); return 0;
--- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -8002,11 +8002,7 @@ static int raid5_run(struct mddev *mddev clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery); - set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - rcu_assign_pointer(mddev->sync_thread, - md_register_thread(md_do_sync, mddev, "reshape")); - if (!mddev->sync_thread) - goto abort; + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); }
/* Ok, everything is just fine now */ @@ -8585,29 +8581,8 @@ static int raid5_start_reshape(struct md clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); clear_bit(MD_RECOVERY_DONE, &mddev->recovery); set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery); - set_bit(MD_RECOVERY_RUNNING, &mddev->recovery); - rcu_assign_pointer(mddev->sync_thread, - md_register_thread(md_do_sync, mddev, "reshape")); - if (!mddev->sync_thread) { - mddev->recovery = 0; - spin_lock_irq(&conf->device_lock); - write_seqcount_begin(&conf->gen_lock); - mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks; - mddev->new_chunk_sectors = - conf->chunk_sectors = conf->prev_chunk_sectors; - mddev->new_layout = conf->algorithm = conf->prev_algo; - rdev_for_each(rdev, mddev) - rdev->new_data_offset = rdev->data_offset; - smp_wmb(); - conf->generation --; - conf->reshape_progress = MaxSector; - mddev->reshape_position = MaxSector; - write_seqcount_end(&conf->gen_lock); - spin_unlock_irq(&conf->device_lock); - return -EAGAIN; - } + set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); conf->reshape_checkpoint = jiffies; - md_wakeup_thread(mddev->sync_thread); md_new_event(); return 0; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai yukuai3@huawei.com
commit 9e46c70e829bddc24e04f963471e9983a11598b7 upstream.
md_start_sync() will suspend the array if there are spares that can be added or removed from conf, however, if reshape is still in progress, this won't happen at all or data will be corrupted(remove_and_add_spares won't be called from md_choose_sync_action for reshape), hence there is no need to suspend the array if reshape is not done yet.
Meanwhile, there is a potential deadlock for raid456:
1) reshape is interrupted;
2) set one of the disk WantReplacement, and add a new disk to the array, however, recovery won't start until the reshape is finished;
3) then issue an IO across reshpae position, this IO will wait for reshape to make progress;
4) continue to reshape, then md_start_sync() found there is a spare disk that can be added to conf, mddev_suspend() is called;
Step 4 and step 3 is waiting for each other, deadlock triggered. Noted this problem is found by code review, and it's not reporduced yet.
Fix this porblem by don't suspend the array for interrupted reshape, this is safe because conf won't be changed until reshape is done.
Fixes: bc08041b32ab ("md: suspend array in md_start_sync() if array need reconfiguration") Cc: stable@vger.kernel.org # v6.7+ Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Song Liu song@kernel.org Link: https://lore.kernel.org/r/20240201092559.910982-6-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -9424,12 +9424,17 @@ static void md_start_sync(struct work_st bool suspend = false; char *name;
- if (md_spares_need_change(mddev)) + /* + * If reshape is still in progress, spares won't be added or removed + * from conf until reshape is done. + */ + if (mddev->reshape_position == MaxSector && + md_spares_need_change(mddev)) { suspend = true; + mddev_suspend(mddev, false); + }
- suspend ? mddev_suspend_and_lock_nointr(mddev) : - mddev_lock_nointr(mddev); - + mddev_lock_nointr(mddev); if (!md_is_rdwr(mddev)) { /* * On a read-only array we can:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yu Kuai yukuai3@huawei.com
commit 855678ed8534518e2b428bcbcec695de9ba248e8 upstream.
submit_flushes atomic_set(&mddev->flush_pending, 1); rdev_for_each_rcu(rdev, mddev) atomic_inc(&mddev->flush_pending); bi->bi_end_io = md_end_flush submit_bio(bi); /* flush io is done first */ md_end_flush if (atomic_dec_and_test(&mddev->flush_pending)) percpu_ref_put(&mddev->active_io) -> active_io is not released
if (atomic_dec_and_test(&mddev->flush_pending)) -> missing release of active_io
For consequence, mddev_suspend() will wait for 'active_io' to be zero forever.
Fix this problem by releasing 'active_io' in submit_flushes() if 'flush_pending' is decreased to zero.
Fixes: fa2bbff7b0b4 ("md: synchronize flush io with array reconfiguration") Cc: stable@vger.kernel.org # v6.1+ Reported-by: Blazej Kucman blazej.kucman@linux.intel.com Closes: https://lore.kernel.org/lkml/20240130172524.0000417b@linux.intel.com/ Signed-off-by: Yu Kuai yukuai3@huawei.com Signed-off-by: Song Liu song@kernel.org Link: https://lore.kernel.org/r/20240201092559.910982-7-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -579,8 +579,12 @@ static void submit_flushes(struct work_s rcu_read_lock(); } rcu_read_unlock(); - if (atomic_dec_and_test(&mddev->flush_pending)) + if (atomic_dec_and_test(&mddev->flush_pending)) { + /* The pair is percpu_ref_get() from md_flush_request() */ + percpu_ref_put(&mddev->active_io); + queue_work(md_wq, &mddev->flush_work); + } }
static void md_submit_flush_data(struct work_struct *ws)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Upton oliver.upton@linux.dev
commit 85a71ee9a0700f6c18862ef3b0011ed9dad99aca upstream.
It is possible that an LPI mapped in a different ITS gets unmapped while handling the MOVALL command. If that is the case, there is no state that can be migrated to the destination. Silently ignore it and continue migrating other LPIs.
Cc: stable@vger.kernel.org Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE") Signed-off-by: Oliver Upton oliver.upton@linux.dev Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/kvm/vgic/vgic-its.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -1432,6 +1432,8 @@ static int vgic_its_cmd_handle_movall(st
for (i = 0; i < irq_count; i++) { irq = vgic_get_irq(kvm, NULL, intids[i]); + if (!irq) + continue;
update_affinity(irq, vcpu2);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Upton oliver.upton@linux.dev
commit 8d3a7dfb801d157ac423261d7cd62c33e95375f8 upstream.
vgic_get_irq() may not return a valid descriptor if there is no ITS that holds a valid translation for the specified INTID. If that is the case, it is safe to silently ignore it and continue processing the LPI pending table.
Cc: stable@vger.kernel.org Fixes: 33d3bc9556a7 ("KVM: arm64: vgic-its: Read initial LPI pending table") Signed-off-by: Oliver Upton oliver.upton@linux.dev Link: https://lore.kernel.org/r/20240221092732.4126848-2-oliver.upton@linux.dev Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/kvm/vgic/vgic-its.c | 3 +++ 1 file changed, 3 insertions(+)
--- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -468,6 +468,9 @@ static int its_sync_lpi_pending_table(st }
irq = vgic_get_irq(vcpu->kvm, NULL, intids[i]); + if (!irq) + continue; + raw_spin_lock_irqsave(&irq->irq_lock, flags); irq->pending_latch = pendmask & (1U << bit_nr); vgic_queue_irq_unlock(vcpu->kvm, irq, flags);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andrzej Kacprowski Andrzej.Kacprowski@intel.com
commit eb0d253ff9c74dee30aa92fe460b825eb28acd73 upstream.
There is no point in requesting 1 tile on VPU40xx as the FW will probably need more tiles to run workloads, so it will have to reconfigure PLL anyway. Don't enable any tiles and allow the FW to perform initial tile configuration.
This improves NPU boot stability as the tiles are always enabled only by the FW from the same initial state.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4") Cc: stable@vger.kernel.org Signed-off-by: Andrzej Kacprowski Andrzej.Kacprowski@intel.com Signed-off-by: Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com Reviewed-by: Jeffrey Hugo quic_jhugo@quicinc.com Link: https://patchwork.freedesktop.org/patch/msgid/20240220131624.1447813-1-jacek... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/accel/ivpu/ivpu_hw_40xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/accel/ivpu/ivpu_hw_40xx.c +++ b/drivers/accel/ivpu/ivpu_hw_40xx.c @@ -24,7 +24,7 @@ #define SKU_HW_ID_SHIFT 16u #define SKU_HW_ID_MASK 0xffff0000u
-#define PLL_CONFIG_DEFAULT 0x1 +#define PLL_CONFIG_DEFAULT 0x0 #define PLL_CDYN_DEFAULT 0x80 #define PLL_EPP_DEFAULT 0x80 #define PLL_REF_CLK_FREQ (50 * 1000000)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasiliy Kovalev kovalev@altlinux.org
commit 136cfaca22567a03bbb3bf53a43d8cb5748b80ec upstream.
The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family.
Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:
general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0
Cc: stable@vger.kernel.org Signed-off-by: Vasiliy Kovalev kovalev@altlinux.org Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Link: https://lore.kernel.org/r/20240214162733.34214-1-kovalev@altlinux.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/gtp.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/gtp.c +++ b/drivers/net/gtp.c @@ -1907,20 +1907,20 @@ static int __init gtp_init(void) if (err < 0) goto error_out;
- err = genl_register_family(>p_genl_family); + err = register_pernet_subsys(>p_net_ops); if (err < 0) goto unreg_rtnl_link;
- err = register_pernet_subsys(>p_net_ops); + err = genl_register_family(>p_genl_family); if (err < 0) - goto unreg_genl_family; + goto unreg_pernet_subsys;
pr_info("GTP module loaded (pdp ctx size %zd bytes)\n", sizeof(struct pdp_ctx)); return 0;
-unreg_genl_family: - genl_unregister_family(>p_genl_family); +unreg_pernet_subsys: + unregister_pernet_subsys(>p_net_ops); unreg_rtnl_link: rtnl_link_unregister(>p_link_ops); error_out:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: zhenwei pi pizhenwei@bytedance.com
commit c0ec2a712daf133d9996a8a1b7ee2d4996080363 upstream.
sizeof(struct virtio_crypto_akcipher_session_para) is less than sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from stack variable leads stack overflow. Clang reports this issue by commands: make -j CC=clang-14 mrproper >/dev/null 2>&1 make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1 make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/ virtio_crypto_akcipher_algs.o
Fixes: 59ca6c93387d ("virtio-crypto: implement RSA algorithm") Link: https://lore.kernel.org/all/0a194a79-e3a3-45e7-be98-83abd3e1cb7e@roeck-us.ne... Cc: stable@vger.kernel.org Signed-off-by: zhenwei pi pizhenwei@bytedance.com Tested-by: Nathan Chancellor nathan@kernel.org # build Acked-by: Michael S. Tsirkin mst@redhat.com Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/crypto/virtio/virtio_crypto_akcipher_algs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c @@ -104,7 +104,8 @@ static void virtio_crypto_dataq_akcipher }
static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher_ctx *ctx, - struct virtio_crypto_ctrl_header *header, void *para, + struct virtio_crypto_ctrl_header *header, + struct virtio_crypto_akcipher_session_para *para, const uint8_t *key, unsigned int keylen) { struct scatterlist outhdr_sg, key_sg, inhdr_sg, *sgs[3]; @@ -128,7 +129,7 @@ static int virtio_crypto_alg_akcipher_in
ctrl = &vc_ctrl_req->ctrl; memcpy(&ctrl->header, header, sizeof(ctrl->header)); - memcpy(&ctrl->u, para, sizeof(ctrl->u)); + memcpy(&ctrl->u.akcipher_create_session.para, para, sizeof(*para)); input = &vc_ctrl_req->input; input->status = cpu_to_le32(VIRTIO_CRYPTO_ERR);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Jun chenjun102@huawei.com
commit fb33a46cd75e18773dd5a414744507d84ae90870 upstream.
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(), but subsys_register() is not called by platform_bus_init().
Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL. This makes mbigen_of_create_domain() always return -ENODEV.
Don't try to retrieve the parent via bus_get_dev_root() and unconditionally hand a NULL pointer to of_platform_device_create() to fix this.
Fixes: fea087fc291b ("irqchip/mbigen: move to use bus_get_dev_root()") Signed-off-by: Chen Jun chenjun102@huawei.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240220111429.110666-1-chenjun102@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/irqchip/irq-mbigen.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)
--- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -235,22 +235,17 @@ static const struct irq_domain_ops mbige static int mbigen_of_create_domain(struct platform_device *pdev, struct mbigen_device *mgn_chip) { - struct device *parent; struct platform_device *child; struct irq_domain *domain; struct device_node *np; u32 num_pins; int ret = 0;
- parent = bus_get_dev_root(&platform_bus_type); - if (!parent) - return -ENODEV; - for_each_child_of_node(pdev->dev.of_node, np) { if (!of_property_read_bool(np, "interrupt-controller")) continue;
- child = of_platform_device_create(np, NULL, parent); + child = of_platform_device_create(np, NULL, NULL); if (!child) { ret = -ENOMEM; break; @@ -273,7 +268,6 @@ static int mbigen_of_create_domain(struc } }
- put_device(parent); if (ret) of_node_put(np);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oliver Upton oliver.upton@linux.dev
commit ec4308ecfc887128a468f03fb66b767559c57c23 upstream.
The GIC/ITS code is designed to ensure to pick up any preallocated LPI tables on the redistributors, as enabling LPIs is a one-way switch. There is no such restriction for vLPIs, and for GICv4.1 it is expected to allocate a new vPE table at boot.
This works as intended when initializing an ITS, however when setting up a redistributor in cpu_init_lpis() the early return for preallocated RD tables skips straight past the GICv4 setup. This all comes to a head when trying to kexec() into a new kernel, as the new kernel silently fails to set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs.
Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always initializes GICv4 on the way out, even if the other RD tables were preallocated.
Fixes: 6479450f72c1 ("irqchip/gic-v4: Fix occasional VLPI drop") Reported-by: George Cherian gcherian@marvell.com Co-developed-by: Marc Zyngier maz@kernel.org Signed-off-by: Marc Zyngier maz@kernel.org Signed-off-by: Oliver Upton oliver.upton@linux.dev Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240219185809.286724-2-oliver.upton@linux.dev Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/irqchip/irq-gic-v3-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -3181,6 +3181,7 @@ static void its_cpu_init_lpis(void) val |= GICR_CTLR_ENABLE_LPIS; writel_relaxed(val, rbase + GICR_CTLR);
+out: if (gic_rdists->has_vlpis && !gic_rdists->has_rvpeid) { void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
@@ -3216,7 +3217,6 @@ static void its_cpu_init_lpis(void)
/* Make sure the GIC has seen the above */ dsb(sy); -out: gic_data_rdist()->flags |= RD_LOCAL_LPI_ENABLED; pr_info("GICv3: CPU%d: using %s LPI pending table @%pa\n", smp_processor_id(),
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nam Cao namcao@linutronix.de
commit 9c92006b896c767218aabe8947b62026a571cfd0 upstream.
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as explained in the description of Interrupt Completion in the PLIC spec:
"The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that *is currently enabled* for the target, the completion is silently ignored."
Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked") ensured that EOI is successful by enabling interrupt first, before EOI.
Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") removed the interrupt enabling code from the previous commit, because it assumes that interrupt should already be enabled at the point of EOI.
However, this is incorrect: there is a window after a hart claiming an interrupt and before irq_desc->lock getting acquired, interrupt can be disabled during this window. Thus, EOI can be invoked while the interrupt is disabled, effectively nullify this EOI. This results in the interrupt never gets asserted again, and the device who uses this interrupt appears frozen.
Make sure that interrupt is really enabled before EOI.
Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") Signed-off-by: Nam Cao namcao@linutronix.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Palmer Dabbelt palmer@dabbelt.com Cc: Paul Walmsley paul.walmsley@sifive.com Cc: Samuel Holland samuel@sholland.org Cc: Marc Zyngier maz@kernel.org Cc: Guo Ren guoren@kernel.org Cc: linux-riscv@lists.infradead.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/irqchip/irq-sifive-plic.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/irqchip/irq-sifive-plic.c +++ b/drivers/irqchip/irq-sifive-plic.c @@ -148,7 +148,13 @@ static void plic_irq_eoi(struct irq_data { struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
- writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM); + if (unlikely(irqd_irq_disabled(d))) { + plic_toggle(handler, d->hwirq, 1); + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM); + plic_toggle(handler, d->hwirq, 0); + } else { + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM); + } }
#ifdef CONFIG_SMP
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vidya Sagar vidyas@nvidia.com
commit db744ddd59be798c2627efbfc71f707f5a935a40 upstream.
While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0.
To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number.
Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels.
Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar vidyas@nvidia.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Shanker Donthineni sdonthineni@nvidia.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/msi/irqdomain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/pci/msi/irqdomain.c +++ b/drivers/pci/msi/irqdomain.c @@ -61,7 +61,7 @@ static irq_hw_number_t pci_msi_domain_ca
return (irq_hw_number_t)desc->msi_index | pci_dev_id(dev) << 11 | - (pci_domain_nr(dev->bus) & 0xFFFFFFFF) << 27; + ((irq_hw_number_t)(pci_domain_nr(dev->bus) & 0xFFFFFFFF)) << 27; }
static void pci_msi_domain_set_desc(msi_alloc_info_t *arg,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tom Parkin tparkin@katalix.com
commit 359e54a93ab43d32ee1bff3c2f9f10cb9f6b6e79 upstream.
l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original intent.
Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()") Cc: David Howells dhowells@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tom Parkin tparkin@katalix.com Reviewed-by: Simon Horman horms@kernel.org Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/l2tp/l2tp_ip6.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -627,7 +627,7 @@ static int l2tp_ip6_sendmsg(struct sock
back_from_confirm: lock_sock(sk); - ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; + ulen = len + (skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0); err = ip6_append_data(sk, ip_generic_getfrag, msg, ulen, transhdrlen, &ipc6, &fl6, (struct rt6_info *)dst,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikita Shubin nikita.shubin@maquefel.me
commit fdf87a0dc26d0550c60edc911cda42f9afec3557 upstream.
Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops.
Cc: stable@vger.kernel.org Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Reported-by: Andy Shevchenko andriy.shevchenko@intel.com Signed-off-by: Nikita Shubin nikita.shubin@maquefel.me Reviewed-by: Linus Walleij linus.walleij@linaro.org Acked-by: Alexander Sverdlin alexander.sverdlin@gmail.com Signed-off-by: Alexander Sverdlin alexander.sverdlin@gmail.com Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.c... Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/mach-ep93xx/core.c | 1 + 1 file changed, 1 insertion(+)
--- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -339,6 +339,7 @@ static struct gpiod_lookup_table ep93xx_ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), GPIO_LOOKUP_IDX("G", 0, NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), + { } }, };
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann arnd@arndb.de
commit 66ad2fbcdbeab0edfd40c5d94f32f053b98c2320 upstream.
The newly added integrity_recheck() function has another larger stack allocation, just like its caller integrity_metadata(). When it gets inlined, the combination of the two exceeds the warning limit for 32-bit architectures and possibly risks an overflow when this is called from a deep call chain through a file system:
drivers/md/dm-integrity.c:1767:13: error: stack frame size (1048) exceeds limit (1024) in 'integrity_metadata' [-Werror,-Wframe-larger-than] 1767 | static void integrity_metadata(struct work_struct *w)
Since the caller at this point is done using its checksum buffer, just reuse the same buffer in the new function to avoid the double allocation.
[Mikulas: add "noinline" to integrity_recheck and verity_recheck. These functions are only called on error, so they shouldn't bloat the stack frame or code size of the caller.]
Fixes: c88f5e553fe3 ("dm-integrity: recheck the integrity tag after a failure") Fixes: 9177f3c0dea6 ("dm-verity: recheck the hash after a failure") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/dm-integrity.c | 10 ++++------ drivers/md/dm-verity-target.c | 4 ++-- 2 files changed, 6 insertions(+), 8 deletions(-)
--- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -1691,14 +1691,13 @@ failed: get_random_bytes(result, ic->tag_size); }
-static void integrity_recheck(struct dm_integrity_io *dio) +static noinline void integrity_recheck(struct dm_integrity_io *dio, char *checksum) { struct bio *bio = dm_bio_from_per_bio_data(dio, sizeof(struct dm_integrity_io)); struct dm_integrity_c *ic = dio->ic; struct bvec_iter iter; struct bio_vec bv; sector_t sector, logical_sector, area, offset; - char checksum_onstack[max_t(size_t, HASH_MAX_DIGESTSIZE, MAX_TAG_SIZE)]; struct page *page; void *buffer;
@@ -1734,9 +1733,8 @@ static void integrity_recheck(struct dm_ goto free_ret; }
- integrity_sector_checksum(ic, logical_sector, buffer, - checksum_onstack); - r = dm_integrity_rw_tag(ic, checksum_onstack, &dio->metadata_block, + integrity_sector_checksum(ic, logical_sector, buffer, checksum); + r = dm_integrity_rw_tag(ic, checksum, &dio->metadata_block, &dio->metadata_offset, ic->tag_size, TAG_CMP); if (r) { if (r > 0) { @@ -1851,7 +1849,7 @@ again: checksums_ptr - checksums, dio->op == REQ_OP_READ ? TAG_CMP : TAG_WRITE); if (unlikely(r)) { if (r > 0) { - integrity_recheck(dio); + integrity_recheck(dio, checksums); goto skip_io; } if (likely(checksums != checksums_onstack)) --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -491,8 +491,8 @@ static int verity_recheck_copy(struct dm return 0; }
-static int verity_recheck(struct dm_verity *v, struct dm_verity_io *io, - struct bvec_iter start, sector_t cur_block) +static noinline int verity_recheck(struct dm_verity *v, struct dm_verity_io *io, + struct bvec_iter start, sector_t cur_block) { struct page *page; void *buffer;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sandeep Dhavale dhavale@google.com
commit 56ee7db31187dc36d501622cb5f1415e88e01c2a upstream.
In erofs_find_target_block() when erofs_dirnamecmp() returns 0, we do not assign the target metabuf. This causes the caller erofs_namei()'s erofs_put_metabuf() at the end to be not effective leaving the refcount on the page. As the page from metabuf (buf->page) is never put, such page cannot be migrated or reclaimed. Fix it now by putting the metabuf from previous loop and assigning the current metabuf to target before returning so caller erofs_namei() can do the final put as it was intended.
Fixes: 500edd095648 ("erofs: use meta buffers for inode lookup") Cc: stable@vger.kernel.org # 5.18+ Signed-off-by: Sandeep Dhavale dhavale@google.com Reviewed-by: Gao Xiang hsiangkao@linux.alibaba.com Reviewed-by: Jingbo Xu jefflexu@linux.alibaba.com Reviewed-by: Chao Yu chao@kernel.org Link: https://lore.kernel.org/r/20240221210348.3667795-1-dhavale@google.com Signed-off-by: Gao Xiang hsiangkao@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/erofs/namei.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
--- a/fs/erofs/namei.c +++ b/fs/erofs/namei.c @@ -130,24 +130,24 @@ static void *erofs_find_target_block(str /* string comparison without already matched prefix */ diff = erofs_dirnamecmp(name, &dname, &matched);
- if (!diff) { - *_ndirents = 0; - goto out; - } else if (diff > 0) { - head = mid + 1; - startprfx = matched; - - if (!IS_ERR(candidate)) - erofs_put_metabuf(target); - *target = buf; - candidate = de; - *_ndirents = ndirents; - } else { + if (diff < 0) { erofs_put_metabuf(&buf); - back = mid - 1; endprfx = matched; + continue; + } + + if (!IS_ERR(candidate)) + erofs_put_metabuf(target); + *target = buf; + if (!diff) { + *_ndirents = 0; + return de; } + head = mid + 1; + startprfx = matched; + candidate = de; + *_ndirents = ndirents; continue; } out: /* free if the candidate is valid */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ondrej Jirman megi@xff.cz
commit 23b1d2d99b0f55326f05e7d757fa197c4a95dc5c upstream.
The reverted commit makes the state machine only ever go from SRC_ATTACH_WAIT to SNK_TRY in endless loop when toggling. After revert it goes to SRC_ATTACHED after initially trying SNK_TRY earlier, as it should for toggling to ever detect the power source mode and the port is again able to provide power to attached power sinks.
This reverts commit 2d6d80127006ae3da26b1f21a65eccf957f2d1e5.
Cc: stable@vger.kernel.org Fixes: 2d6d80127006 ("usb: typec: tcpm: reset counter when enter into unattached state after try role") Signed-off-by: Ondrej Jirman megi@xff.cz Link: https://lore.kernel.org/r/20240217162023.1719738-1-megi@xff.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/typec/tcpm/tcpm.c | 3 --- 1 file changed, 3 deletions(-)
--- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -3730,9 +3730,6 @@ static void tcpm_detach(struct tcpm_port if (tcpm_port_is_disconnected(port)) port->hard_reset_count = 0;
- port->try_src_count = 0; - port->try_snk_count = 0; - if (!port->attached) return;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lino Sanfilippo l.sanfilippo@kunbus.com
commit f418ae73311deb901c0110b08d1bbafc20c1820e upstream.
Before commit 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") the SER_RS485_RX_DURING_TX flag was only set if the rx-during-tx mode was not controlled by a GPIO. Now the flag is set unconditionally when RS485 is enabled. This results in an incorrect setting if the rx-during-tx GPIO is not asserted.
Fix this by setting the flag only if the rx-during-tx mode is not controlled by a GPIO and thus restore the correct behaviour.
Cc: stable@vger.kernel.org # 6.6+ Fixes: 07c30ea5861f ("serial: Do not hold the port lock when setting rx-during-tx GPIO") Signed-off-by: Lino Sanfilippo l.sanfilippo@kunbus.com Link: https://lore.kernel.org/r/20240216224709.9928-1-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/stm32-usart.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -251,7 +251,9 @@ static int stm32_usart_config_rs485(stru writel_relaxed(cr3, port->membase + ofs->cr3); writel_relaxed(cr1, port->membase + ofs->cr1);
- rs485conf->flags |= SER_RS485_RX_DURING_TX; + if (!port->rs485_rx_during_tx_gpio) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + } else { stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DEM | USART_CR3_DEP);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lino Sanfilippo l.sanfilippo@kunbus.com
commit 3b69e32e151bc4a4e3c785cbdb1f918d5ee337ed upstream.
When DMA is used in RS485 mode make sure that the UARTs tx section is enabled before the DMA buffers are queued for transmission.
Cc: stable@vger.kernel.org Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support") Signed-off-by: Lino Sanfilippo l.sanfilippo@kunbus.com Link: https://lore.kernel.org/r/20240216224709.9928-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tty/serial/amba-pl011.c | 60 ++++++++++++++++++++-------------------- 1 file changed, 30 insertions(+), 30 deletions(-)
--- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1345,11 +1345,41 @@ static void pl011_start_tx_pio(struct ua } }
+static void pl011_rs485_tx_start(struct uart_amba_port *uap) +{ + struct uart_port *port = &uap->port; + u32 cr; + + /* Enable transmitter */ + cr = pl011_read(uap, REG_CR); + cr |= UART011_CR_TXE; + + /* Disable receiver if half-duplex */ + if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) + cr &= ~UART011_CR_RXE; + + if (port->rs485.flags & SER_RS485_RTS_ON_SEND) + cr &= ~UART011_CR_RTS; + else + cr |= UART011_CR_RTS; + + pl011_write(cr, uap, REG_CR); + + if (port->rs485.delay_rts_before_send) + mdelay(port->rs485.delay_rts_before_send); + + uap->rs485_tx_started = true; +} + static void pl011_start_tx(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port);
+ if ((uap->port.rs485.flags & SER_RS485_ENABLED) && + !uap->rs485_tx_started) + pl011_rs485_tx_start(uap); + if (!pl011_dma_tx_start(uap)) pl011_start_tx_pio(uap); } @@ -1431,42 +1461,12 @@ static bool pl011_tx_char(struct uart_am return true; }
-static void pl011_rs485_tx_start(struct uart_amba_port *uap) -{ - struct uart_port *port = &uap->port; - u32 cr; - - /* Enable transmitter */ - cr = pl011_read(uap, REG_CR); - cr |= UART011_CR_TXE; - - /* Disable receiver if half-duplex */ - if (!(port->rs485.flags & SER_RS485_RX_DURING_TX)) - cr &= ~UART011_CR_RXE; - - if (port->rs485.flags & SER_RS485_RTS_ON_SEND) - cr &= ~UART011_CR_RTS; - else - cr |= UART011_CR_RTS; - - pl011_write(cr, uap, REG_CR); - - if (port->rs485.delay_rts_before_send) - mdelay(port->rs485.delay_rts_before_send); - - uap->rs485_tx_started = true; -} - /* Returns true if tx interrupts have to be (kept) enabled */ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq) { struct circ_buf *xmit = &uap->port.state->xmit; int count = uap->fifosize >> 1;
- if ((uap->port.rs485.flags & SER_RS485_ENABLED) && - !uap->rs485_tx_started) - pl011_rs485_tx_start(uap); - if (uap->port.x_char) { if (!pl011_tx_char(uap, uap->port.x_char, from_irq)) return true;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thinh Nguyen Thinh.Nguyen@synopsys.com
commit b191a18cb5c47109ca696370a74a5062a70adfd0 upstream.
Don't go through soft-disconnection sequence if the controller hasn't started. Otherwise, there will be timeout and warning reports from the soft-disconnection flow.
Cc: stable@vger.kernel.org Fixes: 61a348857e86 ("usb: dwc3: gadget: Fix NULL pointer dereference in dwc3_gadget_suspend") Reported-by: Marek Szyprowski m.szyprowski@samsung.com Closes: https://lore.kernel.org/linux-usb/20240215233536.7yejlj3zzkl23vjd@synopsys.c... Tested-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Link: https://lore.kernel.org/r/e3be9b929934e0680a6f4b8f6eb11b18ae9c7e07.170804392... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/dwc3/gadget.c | 5 +++++ 1 file changed, 5 insertions(+)
--- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2650,6 +2650,11 @@ static int dwc3_gadget_soft_disconnect(s int ret;
spin_lock_irqsave(&dwc->lock, flags); + if (!dwc->pullups_connected) { + spin_unlock_irqrestore(&dwc->lock, flags); + return 0; + } + dwc->connected = false;
/*
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pawel Laszczak pawell@cadence.com
commit 18a6be674306c9acb05c08e5c3fd376ef50a917c upstream.
host.c file has some parts of code that were introduced for CDNS3 driver and should not be used with CDNSP driver. This patch blocks using these parts of codes by CDNSP driver. These elements include: - xhci_plat_cdns3_xhci object - cdns3 specific XECP_PORT_CAP_REG register - cdns3 specific XECP_AUX_CTRL_REG1 register
cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak pawell@cadence.com Link: https://lore.kernel.org/r/20240206104018.48272-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/cdns3/host.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
--- a/drivers/usb/cdns3/host.c +++ b/drivers/usb/cdns3/host.c @@ -18,6 +18,11 @@ #include "../host/xhci.h" #include "../host/xhci-plat.h"
+/* + * The XECP_PORT_CAP_REG and XECP_AUX_CTRL_REG1 exist only + * in Cadence USB3 dual-role controller, so it can't be used + * with Cadence CDNSP dual-role controller. + */ #define XECP_PORT_CAP_REG 0x8000 #define XECP_AUX_CTRL_REG1 0x8120
@@ -57,6 +62,8 @@ static const struct xhci_plat_priv xhci_ .resume_quirk = xhci_cdns3_resume_quirk, };
+static const struct xhci_plat_priv xhci_plat_cdnsp_xhci; + static int __cdns_host_init(struct cdns *cdns) { struct platform_device *xhci; @@ -81,8 +88,13 @@ static int __cdns_host_init(struct cdns goto err1; }
- cdns->xhci_plat_data = kmemdup(&xhci_plat_cdns3_xhci, - sizeof(struct xhci_plat_priv), GFP_KERNEL); + if (cdns->version < CDNSP_CONTROLLER_V2) + cdns->xhci_plat_data = kmemdup(&xhci_plat_cdns3_xhci, + sizeof(struct xhci_plat_priv), GFP_KERNEL); + else + cdns->xhci_plat_data = kmemdup(&xhci_plat_cdnsp_xhci, + sizeof(struct xhci_plat_priv), GFP_KERNEL); + if (!cdns->xhci_plat_data) { ret = -ENOMEM; goto err1;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pawel Laszczak pawell@cadence.com
commit 47625b018c6bc788bc10dd654c82696eb0a5ef11 upstream.
Cadence have several controllers from 0x000403xx family but current driver suuport detecting only one with DID equal 0x0004034E. It causes that if someone uses different CDNSP controller then driver will use incorrect version and register space. Patch fix this issue.
cc: stable@vger.kernel.org Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak pawell@cadence.com Link: https://lore.kernel.org/r/20240215121609.259772-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/cdns3/core.c | 1 - drivers/usb/cdns3/drd.c | 13 +++++++++---- drivers/usb/cdns3/drd.h | 6 +++++- 3 files changed, 14 insertions(+), 6 deletions(-)
--- a/drivers/usb/cdns3/core.c +++ b/drivers/usb/cdns3/core.c @@ -395,7 +395,6 @@ pm_put: return ret; }
- /** * cdns_wakeup_irq - interrupt handler for wakeup events * @irq: irq number for cdns3/cdnsp core device --- a/drivers/usb/cdns3/drd.c +++ b/drivers/usb/cdns3/drd.c @@ -156,7 +156,8 @@ bool cdns_is_device(struct cdns *cdns) */ static void cdns_otg_disable_irq(struct cdns *cdns) { - writel(0, &cdns->otg_irq_regs->ien); + if (cdns->version) + writel(0, &cdns->otg_irq_regs->ien); }
/** @@ -422,15 +423,20 @@ int cdns_drd_init(struct cdns *cdns)
cdns->otg_regs = (void __iomem *)&cdns->otg_v1_regs->cmd;
- if (readl(&cdns->otg_cdnsp_regs->did) == OTG_CDNSP_DID) { + state = readl(&cdns->otg_cdnsp_regs->did); + + if (OTG_CDNSP_CHECK_DID(state)) { cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *) &cdns->otg_cdnsp_regs->ien; cdns->version = CDNSP_CONTROLLER_V2; - } else { + } else if (OTG_CDNS3_CHECK_DID(state)) { cdns->otg_irq_regs = (struct cdns_otg_irq_regs __iomem *) &cdns->otg_v1_regs->ien; writel(1, &cdns->otg_v1_regs->simulate); cdns->version = CDNS3_CONTROLLER_V1; + } else { + dev_err(cdns->dev, "not supporte DID=0x%08x\n", state); + return -EINVAL; }
dev_dbg(cdns->dev, "DRD version v1 (ID: %08x, rev: %08x)\n", @@ -483,7 +489,6 @@ int cdns_drd_exit(struct cdns *cdns) return 0; }
- /* Indicate the cdns3 core was power lost before */ bool cdns_power_is_lost(struct cdns *cdns) { --- a/drivers/usb/cdns3/drd.h +++ b/drivers/usb/cdns3/drd.h @@ -79,7 +79,11 @@ struct cdnsp_otg_regs { __le32 susp_timing_ctrl; };
-#define OTG_CDNSP_DID 0x0004034E +/* CDNSP driver supports 0x000403xx Cadence USB controller family. */ +#define OTG_CDNSP_CHECK_DID(did) (((did) & GENMASK(31, 8)) == 0x00040300) + +/* CDNS3 driver supports 0x000402xx Cadence USB controller family. */ +#define OTG_CDNS3_CHECK_DID(did) (((did) & GENMASK(31, 8)) == 0x00040200)
/* * Common registers interface for both CDNS3 and CDNSP version of DRD.
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Li Frank.Li@nxp.com
commit cd45f99034b0c8c9cb346dd0d6407a95ca3d36f6 upstream.
... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ...
'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it.
[ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28
Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem.
Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Frank.Li@nxp.com Reviewed-by: Roger Quadros rogerq@kernel.org Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20240202154217.661867-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/cdns3/cdns3-gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -2539,11 +2539,11 @@ static int cdns3_gadget_ep_disable(struc
while (!list_empty(&priv_ep->wa2_descmiss_req_list)) { priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list); + list_del_init(&priv_req->list);
kfree(priv_req->request.buf); cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); - list_del_init(&priv_req->list); --priv_ep->wa2_counter; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Li Frank.Li@nxp.com
commit 5fd9e45f1ebcd57181358af28506e8a661a260b3 upstream.
829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again.
Log:
[ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3]
Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver.
Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li Frank.Li@nxp.com Reviewed-by: Roger Quadros rogerq@kernel.org Acked-by: Peter Chen peter.chen@kernel.org Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/cdns3/cdns3-gadget.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -828,7 +828,11 @@ void cdns3_gadget_giveback(struct cdns3_ return; }
- if (request->complete) { + /* + * zlp request is appended by driver, needn't call usb_gadget_giveback_request() to notify + * gadget composite driver. + */ + if (request->complete && request->buf != priv_dev->zlp_buf) { spin_unlock(&priv_dev->lock); usb_gadget_giveback_request(&priv_ep->endpoint, request);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krishna Kurapati quic_kriskura@quicinc.com
commit 76c51146820c5dac629f21deafab0a7039bc3ccd upstream.
It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped.
Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames
In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list.
Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800
Lecroy shows one byte coming in extra confirming that the byte is coming in from PC:
Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722)
According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize.
Cc: stable@vger.kernel.org Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Signed-off-by: Krishna Kurapati quic_kriskura@quicinc.com Reviewed-by: Maciej Żenczykowski maze@google.com Link: https://lore.kernel.org/r/20240205074650.200304-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/function/f_ncm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -1325,7 +1325,15 @@ parse_ntb: "Parsed NTB with %d frames\n", dgram_counter);
to_process -= block_len; - if (to_process != 0) { + + /* + * Windows NCM driver avoids USB ZLPs by adding a 1-byte + * zero pad as needed. + */ + if (to_process == 1 && + (*(unsigned char *)(ntb_ptr + block_len) == 0x00)) { + to_process--; + } else if (to_process > 0) { ntb_ptr = (unsigned char *)(ntb_ptr + block_len); goto parse_ntb; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaro Koskinen aaro.koskinen@iki.fi
commit 858a74cb512833e276d96a72acb560ce8c138bec upstream.
When upgrading from 6.1 LTS to 6.6 LTS, I noticed the ethernet gadget stopped working on Palm TE.
Commit 8825acd7cc8a ("ARM: omap1: remove dead code") deleted Palm TE from machine_without_vbus_sense(), although the board is still used. Fix that.
Fixes: 8825acd7cc8a ("ARM: omap1: remove dead code") Cc: stable stable@kernel.org Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Acked-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20240217192042.GA372205@darkstar.musicnaut.iki.fi Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/gadget/udc/omap_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2036,7 +2036,8 @@ static irqreturn_t omap_udc_iso_irq(int
static inline int machine_without_vbus_sense(void) { - return machine_is_omap_osk() || machine_is_sx1(); + return machine_is_omap_osk() || machine_is_omap_palmte() || + machine_is_sx1(); }
static int omap_udc_start(struct usb_gadget *g,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang xu.yang_2@nxp.com
commit 1c9be13846c0b2abc2480602f8ef421360e1ad9e upstream.
In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference.
This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations.
Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting") cc: stable@vger.kernel.org Signed-off-by: Xu Yang xu.yang_2@nxp.com Acked-by: Heikki Krogerus heikki.krogerus@linux.intel.com Link: https://lore.kernel.org/r/20240129093739.2371530-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/roles/class.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
--- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -21,6 +21,7 @@ static const struct class role_class = { struct usb_role_switch { struct device dev; struct mutex lock; /* device lock*/ + struct module *module; /* the module this device depends on */ enum usb_role role;
/* From descriptor */ @@ -135,7 +136,7 @@ struct usb_role_switch *usb_role_switch_ usb_role_switch_match);
if (!IS_ERR_OR_NULL(sw)) - WARN_ON(!try_module_get(sw->dev.parent->driver->owner)); + WARN_ON(!try_module_get(sw->module));
return sw; } @@ -157,7 +158,7 @@ struct usb_role_switch *fwnode_usb_role_ sw = fwnode_connection_find_match(fwnode, "usb-role-switch", NULL, usb_role_switch_match); if (!IS_ERR_OR_NULL(sw)) - WARN_ON(!try_module_get(sw->dev.parent->driver->owner)); + WARN_ON(!try_module_get(sw->module));
return sw; } @@ -172,7 +173,7 @@ EXPORT_SYMBOL_GPL(fwnode_usb_role_switch void usb_role_switch_put(struct usb_role_switch *sw) { if (!IS_ERR_OR_NULL(sw)) { - module_put(sw->dev.parent->driver->owner); + module_put(sw->module); put_device(&sw->dev); } } @@ -189,15 +190,18 @@ struct usb_role_switch * usb_role_switch_find_by_fwnode(const struct fwnode_handle *fwnode) { struct device *dev; + struct usb_role_switch *sw = NULL;
if (!fwnode) return NULL;
dev = class_find_device_by_fwnode(&role_class, fwnode); - if (dev) - WARN_ON(!try_module_get(dev->parent->driver->owner)); + if (dev) { + sw = to_role_switch(dev); + WARN_ON(!try_module_get(sw->module)); + }
- return dev ? to_role_switch(dev) : NULL; + return sw; } EXPORT_SYMBOL_GPL(usb_role_switch_find_by_fwnode);
@@ -338,6 +342,7 @@ usb_role_switch_register(struct device * sw->set = desc->set; sw->get = desc->get;
+ sw->module = parent->driver->owner; sw->dev.parent = parent; sw->dev.fwnode = desc->fwnode; sw->dev.class = &role_class;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xu Yang xu.yang_2@nxp.com
commit b787a3e781759026a6212736ef8e52cf83d1821a upstream.
There is a possibility that usb_role_switch device is unregistered before the user put usb_role_switch. In this case, the user may still want to get/set_role() since the user can't sense the changes of usb_role_switch.
This will add a flag to show if usb_role_switch is already registered and avoid unwanted behaviors.
Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") cc: stable@vger.kernel.org Signed-off-by: Xu Yang xu.yang_2@nxp.com Acked-by: Heikki Krogerus heikki.krogerus@linux.intel.com Link: https://lore.kernel.org/r/20240129093739.2371530-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/roles/class.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -23,6 +23,7 @@ struct usb_role_switch { struct mutex lock; /* device lock*/ struct module *module; /* the module this device depends on */ enum usb_role role; + bool registered;
/* From descriptor */ struct device *usb2_port; @@ -49,6 +50,9 @@ int usb_role_switch_set_role(struct usb_ if (IS_ERR_OR_NULL(sw)) return 0;
+ if (!sw->registered) + return -EOPNOTSUPP; + mutex_lock(&sw->lock);
ret = sw->set(sw, role); @@ -74,7 +78,7 @@ enum usb_role usb_role_switch_get_role(s { enum usb_role role;
- if (IS_ERR_OR_NULL(sw)) + if (IS_ERR_OR_NULL(sw) || !sw->registered) return USB_ROLE_NONE;
mutex_lock(&sw->lock); @@ -357,6 +361,8 @@ usb_role_switch_register(struct device * return ERR_PTR(ret); }
+ sw->registered = true; + /* TODO: Symlinks for the host port and the device controller. */
return sw; @@ -371,8 +377,10 @@ EXPORT_SYMBOL_GPL(usb_role_switch_regist */ void usb_role_switch_unregister(struct usb_role_switch *sw) { - if (!IS_ERR_OR_NULL(sw)) + if (!IS_ERR_OR_NULL(sw)) { + sw->registered = false; device_unregister(&sw->dev); + } } EXPORT_SYMBOL_GPL(usb_role_switch_unregister);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geliang Tang tanggeliang@kylinos.cn
commit 6c347be62ae963b301ead8e7fa7b9973e6e0d6e1 upstream.
When userspace PM requires to create an ID 0 subflow in "userspace pm create id 0 subflow" test like this:
userspace_pm_add_sf $ns2 10.0.3.2 0
An ID 1 subflow, in fact, is created.
Since in mptcp_pm_nl_append_new_local_addr(), 'id 0' will be treated as no ID is set by userspace, and will allocate a new ID immediately:
if (!e->addr.id) e->addr.id = find_next_zero_bit(pernet->id_bitmap, MPTCP_PM_MAX_ADDR_ID + 1, 1);
To solve this issue, a new parameter needs_id is added for mptcp_userspace_pm_append_new_local_addr() to distinguish between whether userspace PM has set an ID 0 or whether userspace PM has not set any address.
needs_id is true in mptcp_userspace_pm_get_local_id(), but false in mptcp_pm_nl_announce_doit() and mptcp_pm_nl_subflow_create_doit().
Fixes: e5ed101a6028 ("mptcp: userspace pm allow creating id 0 subflow") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang tanggeliang@kylinos.cn Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mptcp/pm_userspace.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
--- a/net/mptcp/pm_userspace.c +++ b/net/mptcp/pm_userspace.c @@ -26,7 +26,8 @@ void mptcp_free_local_addr_list(struct m }
static int mptcp_userspace_pm_append_new_local_addr(struct mptcp_sock *msk, - struct mptcp_pm_addr_entry *entry) + struct mptcp_pm_addr_entry *entry, + bool needs_id) { DECLARE_BITMAP(id_bitmap, MPTCP_PM_MAX_ADDR_ID + 1); struct mptcp_pm_addr_entry *match = NULL; @@ -41,7 +42,7 @@ static int mptcp_userspace_pm_append_new spin_lock_bh(&msk->pm.lock); list_for_each_entry(e, &msk->pm.userspace_pm_local_addr_list, list) { addr_match = mptcp_addresses_equal(&e->addr, &entry->addr, true); - if (addr_match && entry->addr.id == 0) + if (addr_match && entry->addr.id == 0 && needs_id) entry->addr.id = e->addr.id; id_match = (e->addr.id == entry->addr.id); if (addr_match && id_match) { @@ -64,7 +65,7 @@ static int mptcp_userspace_pm_append_new }
*e = *entry; - if (!e->addr.id) + if (!e->addr.id && needs_id) e->addr.id = find_next_zero_bit(id_bitmap, MPTCP_PM_MAX_ADDR_ID + 1, 1); @@ -153,7 +154,7 @@ int mptcp_userspace_pm_get_local_id(stru if (new_entry.addr.port == msk_sport) new_entry.addr.port = 0;
- return mptcp_userspace_pm_append_new_local_addr(msk, &new_entry); + return mptcp_userspace_pm_append_new_local_addr(msk, &new_entry, true); }
int mptcp_pm_nl_announce_doit(struct sk_buff *skb, struct genl_info *info) @@ -198,7 +199,7 @@ int mptcp_pm_nl_announce_doit(struct sk_ goto announce_err; }
- err = mptcp_userspace_pm_append_new_local_addr(msk, &addr_val); + err = mptcp_userspace_pm_append_new_local_addr(msk, &addr_val, false); if (err < 0) { GENL_SET_ERR_MSG(info, "did not match address and id"); goto announce_err; @@ -378,7 +379,7 @@ int mptcp_pm_nl_subflow_create_doit(stru }
local.addr = addr_l; - err = mptcp_userspace_pm_append_new_local_addr(msk, &local); + err = mptcp_userspace_pm_append_new_local_addr(msk, &local, false); if (err < 0) { GENL_SET_ERR_MSG(info, "did not match address and id"); goto create_err;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geliang Tang tanggeliang@kylinos.cn
commit 584f3894262634596532cf43a5e782e34a0ce374 upstream.
Just the same as userspace PM, a new parameter needs_id is added for in-kernel PM mptcp_pm_nl_append_new_local_addr() too.
Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address ID is set from PM or not.
In mptcp_pm_nl_get_local_id(), needs_id is always true, but in mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to needs_it.
Fixes: efd5a4c04e18 ("mptcp: add the address ID assignment bitmap") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang tanggeliang@kylinos.cn Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mptcp/pm_netlink.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-)
--- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -901,7 +901,8 @@ static void __mptcp_pm_release_addr_entr }
static int mptcp_pm_nl_append_new_local_addr(struct pm_nl_pernet *pernet, - struct mptcp_pm_addr_entry *entry) + struct mptcp_pm_addr_entry *entry, + bool needs_id) { struct mptcp_pm_addr_entry *cur, *del_entry = NULL; unsigned int addr_max; @@ -949,7 +950,7 @@ static int mptcp_pm_nl_append_new_local_ } }
- if (!entry->addr.id) { + if (!entry->addr.id && needs_id) { find_next: entry->addr.id = find_next_zero_bit(pernet->id_bitmap, MPTCP_PM_MAX_ADDR_ID + 1, @@ -960,7 +961,7 @@ find_next: } }
- if (!entry->addr.id) + if (!entry->addr.id && needs_id) goto out;
__set_bit(entry->addr.id, pernet->id_bitmap); @@ -1092,7 +1093,7 @@ int mptcp_pm_nl_get_local_id(struct mptc entry->ifindex = 0; entry->flags = MPTCP_PM_ADDR_FLAG_IMPLICIT; entry->lsk = NULL; - ret = mptcp_pm_nl_append_new_local_addr(pernet, entry); + ret = mptcp_pm_nl_append_new_local_addr(pernet, entry, true); if (ret < 0) kfree(entry);
@@ -1285,6 +1286,18 @@ next: return 0; }
+static bool mptcp_pm_has_addr_attr_id(const struct nlattr *attr, + struct genl_info *info) +{ + struct nlattr *tb[MPTCP_PM_ADDR_ATTR_MAX + 1]; + + if (!nla_parse_nested_deprecated(tb, MPTCP_PM_ADDR_ATTR_MAX, attr, + mptcp_pm_address_nl_policy, info->extack) && + tb[MPTCP_PM_ADDR_ATTR_ID]) + return true; + return false; +} + int mptcp_pm_nl_add_addr_doit(struct sk_buff *skb, struct genl_info *info) { struct nlattr *attr = info->attrs[MPTCP_PM_ENDPOINT_ADDR]; @@ -1326,7 +1339,8 @@ int mptcp_pm_nl_add_addr_doit(struct sk_ goto out_free; } } - ret = mptcp_pm_nl_append_new_local_addr(pernet, entry); + ret = mptcp_pm_nl_append_new_local_addr(pernet, entry, + !mptcp_pm_has_addr_attr_id(attr, info)); if (ret < 0) { GENL_SET_ERR_MSG_FMT(info, "too many addresses or duplicate one: %d", ret); goto out_free;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni pabeni@redhat.com
commit b8adb69a7d29c2d33eb327bca66476fb6066516b upstream.
Since the introduction of the subflow ULP diag interface, the dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly, or acquire the subflow socket lock. Let's do latter, even if slower, to avoid a diffstat havoc.
Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/tcp.h | 2 +- net/mptcp/diag.c | 6 +++++- net/tls/tls_main.c | 2 +- 3 files changed, 7 insertions(+), 3 deletions(-)
--- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -2502,7 +2502,7 @@ struct tcp_ulp_ops { /* cleanup ulp */ void (*release)(struct sock *sk); /* diagnostic */ - int (*get_info)(const struct sock *sk, struct sk_buff *skb); + int (*get_info)(struct sock *sk, struct sk_buff *skb); size_t (*get_info_size)(const struct sock *sk); /* clone ulp */ void (*clone)(const struct request_sock *req, struct sock *newsk, --- a/net/mptcp/diag.c +++ b/net/mptcp/diag.c @@ -13,17 +13,19 @@ #include <uapi/linux/mptcp.h> #include "protocol.h"
-static int subflow_get_info(const struct sock *sk, struct sk_buff *skb) +static int subflow_get_info(struct sock *sk, struct sk_buff *skb) { struct mptcp_subflow_context *sf; struct nlattr *start; u32 flags = 0; + bool slow; int err;
start = nla_nest_start_noflag(skb, INET_ULP_INFO_MPTCP); if (!start) return -EMSGSIZE;
+ slow = lock_sock_fast(sk); rcu_read_lock(); sf = rcu_dereference(inet_csk(sk)->icsk_ulp_data); if (!sf) { @@ -69,11 +71,13 @@ static int subflow_get_info(const struct }
rcu_read_unlock(); + unlock_sock_fast(sk, slow); nla_nest_end(skb, start); return 0;
nla_failure: rcu_read_unlock(); + unlock_sock_fast(sk, slow); nla_nest_cancel(skb, start); return err; } --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -1003,7 +1003,7 @@ static u16 tls_user_config(struct tls_co return 0; }
-static int tls_get_info(const struct sock *sk, struct sk_buff *skb) +static int tls_get_info(struct sock *sk, struct sk_buff *skb) { u16 version, cipher_type; struct tls_context *ctx;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni pabeni@redhat.com
commit a7cfe776637004a4c938fde78be4bd608c32c3ef upstream.
The local address id is accessed lockless by the NL PM, add all the required ONCE annotation. There is a caveat: the local id can be initialized late in the subflow life-cycle, and its validity is controlled by the local_id_valid flag.
Remove such flag and encode the validity in the local_id field itself with negative value before initialization. That allows accessing the field consistently with a single read operation.
Fixes: 0ee4261a3681 ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mptcp/diag.c | 2 +- net/mptcp/pm_netlink.c | 6 +++--- net/mptcp/pm_userspace.c | 2 +- net/mptcp/protocol.c | 2 +- net/mptcp/protocol.h | 15 ++++++++++++--- net/mptcp/subflow.c | 9 +++++---- 6 files changed, 23 insertions(+), 13 deletions(-)
--- a/net/mptcp/diag.c +++ b/net/mptcp/diag.c @@ -65,7 +65,7 @@ static int subflow_get_info(struct sock sf->map_data_len) || nla_put_u32(skb, MPTCP_SUBFLOW_ATTR_FLAGS, flags) || nla_put_u8(skb, MPTCP_SUBFLOW_ATTR_ID_REM, sf->remote_id) || - nla_put_u8(skb, MPTCP_SUBFLOW_ATTR_ID_LOC, sf->local_id)) { + nla_put_u8(skb, MPTCP_SUBFLOW_ATTR_ID_LOC, subflow_get_local_id(sf))) { err = -EMSGSIZE; goto nla_failure; } --- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -800,7 +800,7 @@ static void mptcp_pm_nl_rm_addr_or_subfl mptcp_for_each_subflow_safe(msk, subflow, tmp) { struct sock *ssk = mptcp_subflow_tcp_sock(subflow); int how = RCV_SHUTDOWN | SEND_SHUTDOWN; - u8 id = subflow->local_id; + u8 id = subflow_get_local_id(subflow);
if (rm_type == MPTCP_MIB_RMADDR && subflow->remote_id != rm_id) continue; @@ -809,7 +809,7 @@ static void mptcp_pm_nl_rm_addr_or_subfl
pr_debug(" -> %s rm_list_ids[%d]=%u local_id=%u remote_id=%u mpc_id=%u", rm_type == MPTCP_MIB_RMADDR ? "address" : "subflow", - i, rm_id, subflow->local_id, subflow->remote_id, + i, rm_id, id, subflow->remote_id, msk->mpc_endpoint_id); spin_unlock_bh(&msk->pm.lock); mptcp_subflow_shutdown(sk, ssk, how); @@ -1994,7 +1994,7 @@ static int mptcp_event_add_subflow(struc if (WARN_ON_ONCE(!sf)) return -EINVAL;
- if (nla_put_u8(skb, MPTCP_ATTR_LOC_ID, sf->local_id)) + if (nla_put_u8(skb, MPTCP_ATTR_LOC_ID, subflow_get_local_id(sf))) return -EMSGSIZE;
if (nla_put_u8(skb, MPTCP_ATTR_REM_ID, sf->remote_id)) --- a/net/mptcp/pm_userspace.c +++ b/net/mptcp/pm_userspace.c @@ -234,7 +234,7 @@ static int mptcp_userspace_pm_remove_id_
lock_sock(sk); mptcp_for_each_subflow(msk, subflow) { - if (subflow->local_id == 0) { + if (READ_ONCE(subflow->local_id) == 0) { has_id_0 = true; break; } --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -99,7 +99,7 @@ static int __mptcp_socket_create(struct subflow->subflow_id = msk->subflow_id++;
/* This is the first subflow, always with id 0 */ - subflow->local_id_valid = 1; + WRITE_ONCE(subflow->local_id, 0); mptcp_sock_graft(msk->first, sk->sk_socket); iput(SOCK_INODE(ssock));
--- a/net/mptcp/protocol.h +++ b/net/mptcp/protocol.h @@ -491,10 +491,9 @@ struct mptcp_subflow_context { remote_key_valid : 1, /* received the peer key from */ disposable : 1, /* ctx can be free at ulp release time */ stale : 1, /* unable to snd/rcv data, do not use for xmit */ - local_id_valid : 1, /* local_id is correctly initialized */ valid_csum_seen : 1, /* at least one csum validated */ is_mptfo : 1, /* subflow is doing TFO */ - __unused : 9; + __unused : 10; bool data_avail; bool scheduled; u32 remote_nonce; @@ -505,7 +504,7 @@ struct mptcp_subflow_context { u8 hmac[MPTCPOPT_HMAC_LEN]; /* MPJ subflow only */ u64 iasn; /* initial ack sequence number, MPC subflows only */ }; - u8 local_id; + s16 local_id; /* if negative not initialized yet */ u8 remote_id; u8 reset_seen:1; u8 reset_transient:1; @@ -556,6 +555,7 @@ mptcp_subflow_ctx_reset(struct mptcp_sub { memset(&subflow->reset, 0, sizeof(subflow->reset)); subflow->request_mptcp = 1; + WRITE_ONCE(subflow->local_id, -1); }
static inline u64 @@ -1022,6 +1022,15 @@ int mptcp_pm_get_local_id(struct mptcp_s int mptcp_pm_nl_get_local_id(struct mptcp_sock *msk, struct mptcp_addr_info *skc); int mptcp_userspace_pm_get_local_id(struct mptcp_sock *msk, struct mptcp_addr_info *skc);
+static inline u8 subflow_get_local_id(const struct mptcp_subflow_context *subflow) +{ + int local_id = READ_ONCE(subflow->local_id); + + if (local_id < 0) + return 0; + return local_id; +} + void __init mptcp_pm_nl_init(void); void mptcp_pm_nl_work(struct mptcp_sock *msk); void mptcp_pm_nl_rm_subflow_received(struct mptcp_sock *msk, --- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -577,8 +577,8 @@ do_reset:
static void subflow_set_local_id(struct mptcp_subflow_context *subflow, int local_id) { - subflow->local_id = local_id; - subflow->local_id_valid = 1; + WARN_ON_ONCE(local_id < 0 || local_id > 255); + WRITE_ONCE(subflow->local_id, local_id); }
static int subflow_chk_local_id(struct sock *sk) @@ -587,7 +587,7 @@ static int subflow_chk_local_id(struct s struct mptcp_sock *msk = mptcp_sk(subflow->conn); int err;
- if (likely(subflow->local_id_valid)) + if (likely(subflow->local_id >= 0)) return 0;
err = mptcp_pm_get_local_id(msk, (struct sock_common *)sk); @@ -1731,6 +1731,7 @@ static struct mptcp_subflow_context *sub pr_debug("subflow=%p", ctx);
ctx->tcp_sock = sk; + WRITE_ONCE(ctx->local_id, -1);
return ctx; } @@ -1966,7 +1967,7 @@ static void subflow_ulp_clone(const stru new_ctx->idsn = subflow_req->idsn;
/* this is the first subflow, id is always 0 */ - new_ctx->local_id_valid = 1; + subflow_set_local_id(new_ctx, 0); } else if (subflow_req->mp_join) { new_ctx->ssn_offset = subflow_req->ssn_offset; new_ctx->mp_join = 1;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni pabeni@redhat.com
commit 967d3c27127e71a10ff5c083583a038606431b61 upstream.
Similar to the previous patch, address the data race on remote_id, adding the suitable ONCE annotations.
Fixes: bedee0b56113 ("mptcp: address lookup improvements") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mptcp/pm_netlink.c | 8 ++++---- net/mptcp/subflow.c | 6 +++--- 2 files changed, 7 insertions(+), 7 deletions(-)
--- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -443,7 +443,7 @@ static unsigned int fill_remote_addresse mptcp_for_each_subflow(msk, subflow) { ssk = mptcp_subflow_tcp_sock(subflow); remote_address((struct sock_common *)ssk, &addrs[i]); - addrs[i].id = subflow->remote_id; + addrs[i].id = READ_ONCE(subflow->remote_id); if (deny_id0 && !addrs[i].id) continue;
@@ -799,18 +799,18 @@ static void mptcp_pm_nl_rm_addr_or_subfl
mptcp_for_each_subflow_safe(msk, subflow, tmp) { struct sock *ssk = mptcp_subflow_tcp_sock(subflow); + u8 remote_id = READ_ONCE(subflow->remote_id); int how = RCV_SHUTDOWN | SEND_SHUTDOWN; u8 id = subflow_get_local_id(subflow);
- if (rm_type == MPTCP_MIB_RMADDR && subflow->remote_id != rm_id) + if (rm_type == MPTCP_MIB_RMADDR && remote_id != rm_id) continue; if (rm_type == MPTCP_MIB_RMSUBFLOW && !mptcp_local_id_match(msk, id, rm_id)) continue;
pr_debug(" -> %s rm_list_ids[%d]=%u local_id=%u remote_id=%u mpc_id=%u", rm_type == MPTCP_MIB_RMADDR ? "address" : "subflow", - i, rm_id, id, subflow->remote_id, - msk->mpc_endpoint_id); + i, rm_id, id, remote_id, msk->mpc_endpoint_id); spin_unlock_bh(&msk->pm.lock); mptcp_subflow_shutdown(sk, ssk, how);
--- a/net/mptcp/subflow.c +++ b/net/mptcp/subflow.c @@ -535,7 +535,7 @@ static void subflow_finish_connect(struc subflow->backup = mp_opt.backup; subflow->thmac = mp_opt.thmac; subflow->remote_nonce = mp_opt.nonce; - subflow->remote_id = mp_opt.join_id; + WRITE_ONCE(subflow->remote_id, mp_opt.join_id); pr_debug("subflow=%p, thmac=%llu, remote_nonce=%u backup=%d", subflow, subflow->thmac, subflow->remote_nonce, subflow->backup); @@ -1567,7 +1567,7 @@ int __mptcp_subflow_connect(struct sock pr_debug("msk=%p remote_token=%u local_id=%d remote_id=%d", msk, remote_token, local_id, remote_id); subflow->remote_token = remote_token; - subflow->remote_id = remote_id; + WRITE_ONCE(subflow->remote_id, remote_id); subflow->request_join = 1; subflow->request_bkup = !!(flags & MPTCP_PM_ADDR_FLAG_BACKUP); subflow->subflow_id = msk->subflow_id++; @@ -1974,7 +1974,7 @@ static void subflow_ulp_clone(const stru new_ctx->fully_established = 1; new_ctx->remote_key_valid = 1; new_ctx->backup = subflow_req->backup; - new_ctx->remote_id = subflow_req->remote_id; + WRITE_ONCE(new_ctx->remote_id, subflow_req->remote_id); new_ctx->token = subflow_req->token; new_ctx->thmac = subflow_req->thmac;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paolo Abeni pabeni@redhat.com
commit 045e9d812868a2d80b7a57b224ce8009444b7bbc upstream.
Fullmesh endpoints could end-up unexpectedly generating duplicate subflows - same local and remote addresses - when multiple incoming ADD_ADDR are processed before the PM creates the subflow for the local endpoints.
Address the issue explicitly checking for duplicates at subflow creation time.
To avoid a quadratic computational complexity, track the unavailable remote address ids in a temporary bitmap and initialize such bitmap with the remote ids of all the existing subflows matching the local address currently processed.
The above allows additionally replacing the existing code checking for duplicate entry in the current set with a simple bit test operation.
Fixes: 2843ff6f36db ("mptcp: remote addresses fullmesh") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435 Signed-off-by: Paolo Abeni pabeni@redhat.com Reviewed-by: Mat Martineau martineau@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mptcp/pm_netlink.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-)
--- a/net/mptcp/pm_netlink.c +++ b/net/mptcp/pm_netlink.c @@ -396,19 +396,6 @@ void mptcp_pm_free_anno_list(struct mptc } }
-static bool lookup_address_in_vec(const struct mptcp_addr_info *addrs, unsigned int nr, - const struct mptcp_addr_info *addr) -{ - int i; - - for (i = 0; i < nr; i++) { - if (addrs[i].id == addr->id) - return true; - } - - return false; -} - /* Fill all the remote addresses into the array addrs[], * and return the array size. */ @@ -440,6 +427,16 @@ static unsigned int fill_remote_addresse msk->pm.subflows++; addrs[i++] = remote; } else { + DECLARE_BITMAP(unavail_id, MPTCP_PM_MAX_ADDR_ID + 1); + + /* Forbid creation of new subflows matching existing + * ones, possibly already created by incoming ADD_ADDR + */ + bitmap_zero(unavail_id, MPTCP_PM_MAX_ADDR_ID + 1); + mptcp_for_each_subflow(msk, subflow) + if (READ_ONCE(subflow->local_id) == local->id) + __set_bit(subflow->remote_id, unavail_id); + mptcp_for_each_subflow(msk, subflow) { ssk = mptcp_subflow_tcp_sock(subflow); remote_address((struct sock_common *)ssk, &addrs[i]); @@ -447,11 +444,17 @@ static unsigned int fill_remote_addresse if (deny_id0 && !addrs[i].id) continue;
+ if (test_bit(addrs[i].id, unavail_id)) + continue; + if (!mptcp_pm_addr_families_match(sk, local, &addrs[i])) continue;
- if (!lookup_address_in_vec(addrs, i, &addrs[i]) && - msk->pm.subflows < subflows_max) { + if (msk->pm.subflows < subflows_max) { + /* forbid creating multiple address towards + * this id + */ + __set_bit(addrs[i].id, unavail_id); msk->pm.subflows++; i++; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 2ef0d804c090658960c008446523863fd7e3541e upstream.
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated names.
Some subtests from the userspace_pm selftest had the same names. That's because different subflows are created (and deleted) between the same pair of IP addresses.
Simply adding the destination port in the name is then enough to have different names, because the destination port is always different.
Note that adding such info takes a bit more space, so we need to increase a bit the width to print the name, simply to keep all the '[ OK ]' aligned as before.
Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/userspace_pm.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh +++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh @@ -75,7 +75,7 @@ print_test() { test_name="${1}"
- _printf "%-63s" "${test_name}" + _printf "%-68s" "${test_name}" }
print_results() @@ -555,7 +555,7 @@ verify_subflow_events() local remid local info
- info="${e_saddr} (${e_from}) => ${e_daddr} (${e_to})" + info="${e_saddr} (${e_from}) => ${e_daddr}:${e_dport} (${e_to})"
if [ "$e_type" = "$SUB_ESTABLISHED" ] then
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 4d8e0dde0403b5a86aa83e243f020711a9c3e31f upstream.
The selftest was correctly recording all the results, but the 'reverse direction' part was missing in the name when needed.
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name.
Fixes: 675d99338e7a ("selftests: mptcp: simult flows: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/simult_flows.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/tools/testing/selftests/net/mptcp/simult_flows.sh +++ b/tools/testing/selftests/net/mptcp/simult_flows.sh @@ -267,7 +267,8 @@ run_test() [ $bail -eq 0 ] || exit $ret fi
- printf "%-60s" "$msg - reverse direction" + msg+=" - reverse direction" + printf "%-60s" "${msg}" do_transfer $large $small $time lret=$? mptcp_lib_result_code "${lret}" "${msg}"
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit d2a2547565a9f1ad7989f7e21f97cbf065a9390d upstream.
If the feature is not supported by older kernels, and instead of just ignoring some tests, we should mark them as skipped, so we can still track them.
Fixes: d85555ac11f9 ("selftests: mptcp: pm_netlink: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/pm_netlink.sh | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh +++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh @@ -194,6 +194,12 @@ subflow 10.0.1.1" " (nofullmesh ip netns exec $ns1 ./pm_nl_ctl set id 1 flags backup,fullmesh check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \ subflow,backup,fullmesh 10.0.1.1" " (backup,fullmesh)" +else + for st in fullmesh nofullmesh backup,fullmesh; do + st=" (${st})" + printf "%-50s%s\n" "${st}" "[SKIP]" + mptcp_lib_result_skip "${st}" + done fi
mptcp_lib_result_print_all_tap
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 662f084f3396d8a804d56cb53ac05c9e39902a7b upstream.
Since the 'Fixes' commit mentioned below, and if the kernel being tested doesn't support the 'fullmesh' flag, this error will be printed:
netlink error -22 (Invalid argument) ./pm_nl_ctl: bailing out due to netlink error[s]
But that can be normal if the kernel doesn't support the feature, no need to print this worrying error message while everything else looks OK. So we can mute stderr. Failures will still be detected if any.
Fixes: 1dc88d241f92 ("selftests: mptcp: pm_nl_ctl: always look for errors") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/pm_netlink.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/testing/selftests/net/mptcp/pm_netlink.sh +++ b/tools/testing/selftests/net/mptcp/pm_netlink.sh @@ -183,7 +183,7 @@ check "ip netns exec $ns1 ./pm_nl_ctl du subflow 10.0.1.1" " (nobackup)"
# fullmesh support has been added later -ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh +ip netns exec $ns1 ./pm_nl_ctl set id 1 flags fullmesh 2>/dev/null if ip netns exec $ns1 ./pm_nl_ctl dump | grep -q "fullmesh" || mptcp_lib_expect_all_features; then check "ip netns exec $ns1 ./pm_nl_ctl dump" "id 1 flags \
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geliang Tang geliang.tang@linux.dev
commit 81ab772819da408977ac79c0a17d8be57283379f upstream.
This patch adds a new helper chk_msk_cestab() to check the current established connections counter MIB_CURRESTAB in diag.sh. Invoke it to check the counter during the connection after every chk_msk_inuse().
Signed-off-by: Geliang Tang geliang.tang@linux.dev Reviewed-by: Matthieu Baerts matttbe@kernel.org Signed-off-by: Matthieu Baerts matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/diag.sh | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
--- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -56,7 +56,7 @@ __chk_nr() local command="$1" local expected=$2 local msg="$3" - local skip="${4:-SKIP}" + local skip="${4-SKIP}" local nr
nr=$(eval $command) @@ -199,6 +199,15 @@ wait_local_port_listen() done }
+# $1: cestab nr +chk_msk_cestab() +{ + local cestab=$1 + + __chk_nr "mptcp_lib_get_counter ${ns} MPTcpExtMPCurrEstab" \ + "${cestab}" "....chk ${cestab} cestab" "" +} + wait_connected() { local listener_ns="${1}" @@ -236,9 +245,11 @@ chk_msk_nr 2 "after MPC handshake " chk_msk_remote_key_nr 2 "....chk remote_key" chk_msk_fallback_nr 0 "....chk no fallback" chk_msk_inuse 2 "....chk 2 msk in use" +chk_msk_cestab 2 flush_pids
chk_msk_inuse 0 "....chk 0 msk in use after flush" +chk_msk_cestab 0
echo "a" | \ timeout ${timeout_test} \ @@ -254,9 +265,11 @@ echo "b" | \ wait_connected $ns 10001 chk_msk_fallback_nr 1 "check fallback" chk_msk_inuse 1 "....chk 1 msk in use" +chk_msk_cestab 1 flush_pids
chk_msk_inuse 0 "....chk 0 msk in use after flush" +chk_msk_cestab 0
NR_CLIENTS=100 for I in `seq 1 $NR_CLIENTS`; do @@ -278,9 +291,11 @@ done
wait_msk_nr $((NR_CLIENTS*2)) "many msk socket present" chk_msk_inuse $((NR_CLIENTS*2)) "....chk many msk in use" +chk_msk_cestab $((NR_CLIENTS*2)) flush_pids
chk_msk_inuse 0 "....chk 0 msk in use after flush" +chk_msk_cestab 0
mptcp_lib_result_print_all_tap exit $ret
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 694bd45980a61045eb5ec07799e3b94c76db830e upstream.
Since the 'Fixes' commit mentioned below, the command that is executed in __chk_nr() helper can return nothing if the feature is not supported. This is the case when the MPTCP CURRESTAB counter is not supported.
To avoid this warning ...
./diag.sh: line 65: [: !=: unary operator expected
... we just need to surround '$nr' with double quotes, to support an empty string when the feature is not supported.
Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/diag.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/net/mptcp/diag.sh b/tools/testing/selftests/net/mptcp/diag.sh index 04fcb8a077c9..e0615c6ffb8d 100755 --- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -62,8 +62,8 @@ __chk_nr() nr=$(eval $command)
printf "%-50s" "$msg" - if [ $nr != $expected ]; then - if [ $nr = "$skip" ] && ! mptcp_lib_expect_all_features; then + if [ "$nr" != "$expected" ]; then + if [ "$nr" = "$skip" ] && ! mptcp_lib_expect_all_features; then echo "[ skip ] Feature probably not supported" mptcp_lib_result_skip "${msg}" else
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 645c1dc965ef6b5554e5e69737bb179c7a0f872f upstream.
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name.
Some 'in use' subtests from the diag selftest had the same names, e.g.:
chk 0 msk in use after flush
Now the previous value is taken, to have different names, e.g.:
chk 2->0 msk in use after flush
While at it, avoid repeating the full message, declare it once in the helper.
Fixes: ce9902573652 ("selftests: mptcp: diag: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/diag.sh | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
--- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -166,9 +166,13 @@ chk_msk_listen() chk_msk_inuse() { local expected=$1 - local msg="$2" + local msg="....chk ${2:-${expected}} msk in use" local listen_nr
+ if [ "${expected}" -eq 0 ]; then + msg+=" after flush" + fi + listen_nr=$(ss -N "${ns}" -Ml | grep -c LISTEN) expected=$((expected + listen_nr))
@@ -179,7 +183,7 @@ chk_msk_inuse() sleep 0.1 done
- __chk_nr get_msk_inuse $expected "$msg" 0 + __chk_nr get_msk_inuse $expected "${msg}" 0 }
# $1: ns, $2: port @@ -244,11 +248,11 @@ wait_connected $ns 10000 chk_msk_nr 2 "after MPC handshake " chk_msk_remote_key_nr 2 "....chk remote_key" chk_msk_fallback_nr 0 "....chk no fallback" -chk_msk_inuse 2 "....chk 2 msk in use" +chk_msk_inuse 2 chk_msk_cestab 2 flush_pids
-chk_msk_inuse 0 "....chk 0 msk in use after flush" +chk_msk_inuse 0 "2->0" chk_msk_cestab 0
echo "a" | \ @@ -264,11 +268,11 @@ echo "b" | \ 127.0.0.1 >/dev/null & wait_connected $ns 10001 chk_msk_fallback_nr 1 "check fallback" -chk_msk_inuse 1 "....chk 1 msk in use" +chk_msk_inuse 1 chk_msk_cestab 1 flush_pids
-chk_msk_inuse 0 "....chk 0 msk in use after flush" +chk_msk_inuse 0 "1->0" chk_msk_cestab 0
NR_CLIENTS=100 @@ -290,11 +294,11 @@ for I in `seq 1 $NR_CLIENTS`; do done
wait_msk_nr $((NR_CLIENTS*2)) "many msk socket present" -chk_msk_inuse $((NR_CLIENTS*2)) "....chk many msk in use" +chk_msk_inuse $((NR_CLIENTS*2)) "many" chk_msk_cestab $((NR_CLIENTS*2)) flush_pids
-chk_msk_inuse 0 "....chk 0 msk in use after flush" +chk_msk_inuse 0 "many->0" chk_msk_cestab 0
mptcp_lib_result_print_all_tap
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 4103d8480866fe5abb71ef0ed8af3a3b7b9625bf upstream.
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name.
Some 'cestab' subtests from the diag selftest had the same names, e.g.:
....chk 0 cestab
Now the previous value is taken, to have different names, e.g.:
....chk 2->0 cestab after flush
While at it, the 'after flush' info is added, similar to what is done with the 'in use' subtests. Also inspired by these 'in use' subtests, 'many' is displayed instead of a large number:
many msk socket present [ ok ] ....chk many msk in use [ ok ] ....chk many cestab [ ok ] ....chk many->0 msk in use after flush [ ok ] ....chk many->0 cestab after flush [ ok ]
Fixes: 81ab772819da ("selftests: mptcp: diag: check CURRESTAB counters") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/diag.sh | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
--- a/tools/testing/selftests/net/mptcp/diag.sh +++ b/tools/testing/selftests/net/mptcp/diag.sh @@ -206,10 +206,15 @@ wait_local_port_listen() # $1: cestab nr chk_msk_cestab() { - local cestab=$1 + local expected=$1 + local msg="....chk ${2:-${expected}} cestab" + + if [ "${expected}" -eq 0 ]; then + msg+=" after flush" + fi
__chk_nr "mptcp_lib_get_counter ${ns} MPTcpExtMPCurrEstab" \ - "${cestab}" "....chk ${cestab} cestab" "" + "${expected}" "${msg}" "" }
wait_connected() @@ -253,7 +258,7 @@ chk_msk_cestab 2 flush_pids
chk_msk_inuse 0 "2->0" -chk_msk_cestab 0 +chk_msk_cestab 0 "2->0"
echo "a" | \ timeout ${timeout_test} \ @@ -273,7 +278,7 @@ chk_msk_cestab 1 flush_pids
chk_msk_inuse 0 "1->0" -chk_msk_cestab 0 +chk_msk_cestab 0 "1->0"
NR_CLIENTS=100 for I in `seq 1 $NR_CLIENTS`; do @@ -295,11 +300,11 @@ done
wait_msk_nr $((NR_CLIENTS*2)) "many msk socket present" chk_msk_inuse $((NR_CLIENTS*2)) "many" -chk_msk_cestab $((NR_CLIENTS*2)) +chk_msk_cestab $((NR_CLIENTS*2)) "many" flush_pids
chk_msk_inuse 0 "many->0" -chk_msk_cestab 0 +chk_msk_cestab 0 "many->0"
mptcp_lib_result_print_all_tap exit $ret
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lennert Buytenhek kernel@wantstofly.org
commit 51af8f255bdaca6d501afc0d085b808f67b44d91 upstream.
ASMedia have confirmed that all ASM106x parts currently listed in ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran into on the ASM1061, and therefore, we need to apply the quirk added by commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers") to the other supported ASM106x parts as well.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/ Signed-off-by: Lennert Buytenhek kernel@wantstofly.org [cassel: add link to ASMedia confirmation email] Signed-off-by: Niklas Cassel cassel@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/ahci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -606,13 +606,13 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(PROMISE, 0x3781), board_ahci }, /* FastTrak TX8660 ahci-mode */
/* ASMedia */ - { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */ - { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci_43bit_dma }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci_43bit_dma }, /* ASM1060 */ { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci_43bit_dma }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci_43bit_dma }, /* ASM1061/1062 */ - { PCI_VDEVICE(ASMEDIA, 0x0621), board_ahci }, /* ASM1061R */ - { PCI_VDEVICE(ASMEDIA, 0x0622), board_ahci }, /* ASM1062R */ - { PCI_VDEVICE(ASMEDIA, 0x0624), board_ahci }, /* ASM1062+JMB575 */ + { PCI_VDEVICE(ASMEDIA, 0x0621), board_ahci_43bit_dma }, /* ASM1061R */ + { PCI_VDEVICE(ASMEDIA, 0x0622), board_ahci_43bit_dma }, /* ASM1062R */ + { PCI_VDEVICE(ASMEDIA, 0x0624), board_ahci_43bit_dma }, /* ASM1062+JMB575 */ { PCI_VDEVICE(ASMEDIA, 0x1062), board_ahci }, /* ASM1062A */ { PCI_VDEVICE(ASMEDIA, 0x1064), board_ahci }, /* ASM1064 */ { PCI_VDEVICE(ASMEDIA, 0x1164), board_ahci }, /* ASM1164 */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Steve French stfrench@microsoft.com
commit 45be0882c5f91e1b92e645001dd1a53b3bd58c97 upstream.
Address static checker warning in cifs_ses_get_chan_index(): warn: variable dereferenced before check 'server' To be consistent, and reduce risk, we should add another check for null server pointer.
Fixes: 88675b22d34e ("cifs: do not search for channel if server is terminating") Reported-by: Dan Carpenter dan.carpenter@linaro.org Reviewed-by: Shyam Prasad N sprasad@microsoft.com Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/smb/client/sess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/smb/client/sess.c +++ b/fs/smb/client/sess.c @@ -76,7 +76,7 @@ cifs_ses_get_chan_index(struct cifs_ses unsigned int i;
/* if the channel is waiting for termination */ - if (server->terminate) + if (server && server->terminate) return CIFS_INVAL_CHAN_INDEX;
for (i = 0; i < ses->chan_count; i++) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nathan Chancellor nathan@kernel.org
commit d7643fe6fb76edb1f2f1497bf5e8b8f4774b5129 upstream.
Clang warns (or errors with CONFIG_WERROR=y) when performing arithmetic with different enumerated types, which is usually a bug:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:548:24: error: arithmetic between different enumeration types ('const enum dc_link_rate' and 'const enum dc_lane_count') [-Werror,-Wenum-enum-conversion] 548 | link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8; | ~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~ 1 error generated.
In this case, there is not a problem because the enumerated types are basically treated as '#define' values. Add an explicit cast to an integral type to silence the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1976 Fixes: 5f3bce13266e ("drm/amd/display: Request usb4 bw for mst streams") Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c @@ -544,8 +544,9 @@ int link_dp_dpia_get_dp_overhead_in_dp_t */ const struct dc_link_settings *link_cap = dc_link_get_link_cap(link); - uint32_t link_bw_in_kbps = - link_cap->link_rate * link_cap->lane_count * LINK_RATE_REF_FREQ_IN_KHZ * 8; + uint32_t link_bw_in_kbps = (uint32_t)link_cap->link_rate * + (uint32_t)link_cap->lane_count * + LINK_RATE_REF_FREQ_IN_KHZ * 8; link_mst_overhead = (link_bw_in_kbps / 64) + ((link_bw_in_kbps % 64) ? 1 : 0); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivasan Shanmugam srinivasan.shanmugam@amd.com
commit 97cba232549b9fe7e491fb60a69cf93075015f29 upstream.
The error message buffer overflow 'dc->links' 12 <= 12 suggests that the code is trying to access an element of the dc->links array that is beyond its bounds. In C, arrays are zero-indexed, so an array with 12 elements has valid indices from 0 to 11. Trying to access dc->links[12] would be an attempt to access the 13th element of a 12-element array, which is a buffer overflow.
To fix this, ensure that the loop does not go beyond the last valid index when accessing dc->links[i + 1] by subtracting 1 from the loop condition.
This would ensure that i + 1 is always a valid index in the array.
Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12
Fixes: 59f1622a5f05 ("drm/amd/display: Add dpia display mode validation logic") Cc: PeiChen Huang peichen.huang@amd.com Cc: Aric Cyr aric.cyr@amd.com Cc: Rodrigo Siqueira rodrigo.siqueira@amd.com Cc: Aurabindo Pillai aurabindo.pillai@amd.com Cc: Meenakshikumar Somasundaram meenakshikumar.somasundaram@amd.com Signed-off-by: Srinivasan Shanmugam srinivasan.shanmugam@amd.com Reviewed-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c @@ -196,7 +196,7 @@ static int get_host_router_total_dp_tunn struct dc_link *link_dpia_primary, *link_dpia_secondary; int total_bw = 0;
- for (uint8_t i = 0; i < MAX_PIPES * 2; ++i) { + for (uint8_t i = 0; i < (MAX_PIPES * 2) - 1; ++i) {
if (!dc->links[i] || dc->links[i]->ep_type != DISPLAY_ENDPOINT_USB4_DPIA) continue;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sohaib Nadeem sohaib.nadeem@amd.com
commit a538dabf772c169641e151834e161e241802ab33 upstream.
[why]: This reverts commit 2ff33c759a4247c84ec0b7815f1f223e155ba82a.
The commit caused corruption when running some applications in fullscreen
Cc: Mario Limonciello mario.limonciello@amd.com Cc: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee alvin.lee2@amd.com Acked-by: Aurabindo Pillai aurabindo.pillai@amd.com Signed-off-by: Sohaib Nadeem sohaib.nadeem@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -2719,7 +2719,7 @@ static int build_synthetic_soc_states(bo struct _vcs_dpi_voltage_scaling_st entry = {0}; struct clk_limit_table_entry max_clk_data = {0};
- unsigned int min_dcfclk_mhz = 399, min_fclk_mhz = 599; + unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299;
static const unsigned int num_dcfclk_stas = 5; unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564};
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Zhipeng Lu alexious@zju.edu.cn
[ Upstream commit 809aa64ebff51eb170ee31a95f83b2d21efa32e2 ]
When dma_alloc_coherent fails to allocate dd->cr_base[i].va, init_credit_return should deallocate dd->cr_base and dd->cr_base[i] that allocated before. Or those resources would be never freed and a memleak is triggered.
Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Zhipeng Lu alexious@zju.edu.cn Link: https://lore.kernel.org/r/20240112085523.3731720-1-alexious@zju.edu.cn Acked-by: Dennis Dalessandro dennis.dalessandro@cornelisnetworks.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hfi1/pio.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index 68c621ff59d03..5a91cbda4aee6 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -2086,7 +2086,7 @@ int init_credit_return(struct hfi1_devdata *dd) "Unable to allocate credit return DMA range for NUMA %d\n", i); ret = -ENOMEM; - goto done; + goto free_cr_base; } } set_dev_node(&dd->pcidev->dev, dd->node); @@ -2094,6 +2094,10 @@ int init_credit_return(struct hfi1_devdata *dd) ret = 0; done: return ret; + +free_cr_base: + free_credit_return(dd); + goto done; }
void free_credit_return(struct hfi1_devdata *dd)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kalesh AP kalesh-anakkur.purayil@broadcom.com
[ Upstream commit 3687b450c5f32e80f179ce4b09e0454da1449eac ]
SRQ resize is not supported in the driver. But driver is not returning error from bnxt_re_modify_srq() for SRQ resize.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: Kalesh AP kalesh-anakkur.purayil@broadcom.com Signed-off-by: Selvin Xavier selvin.xavier@broadcom.com Link: https://lore.kernel.org/r/1705985677-15551-5-git-send-email-selvin.xavier@br... Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index faa88d12ee868..cc466dfd792b0 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -1809,7 +1809,7 @@ int bnxt_re_modify_srq(struct ib_srq *ib_srq, struct ib_srq_attr *srq_attr, switch (srq_attr_mask) { case IB_SRQ_MAX_WR: /* SRQ resize is not supported */ - break; + return -EINVAL; case IB_SRQ_LIMIT: /* Change the SRQ threshold */ if (srq_attr->srq_limit > srq->qplib_srq.max_wqe) @@ -1824,13 +1824,12 @@ int bnxt_re_modify_srq(struct ib_srq *ib_srq, struct ib_srq_attr *srq_attr, /* On success, update the shadow */ srq->srq_limit = srq_attr->srq_limit; /* No need to Build and send response back to udata */ - break; + return 0; default: ibdev_err(&rdev->ibdev, "Unsupported srq_attr_mask 0x%x", srq_attr_mask); return -EINVAL; } - return 0; }
int bnxt_re_query_srq(struct ib_srq *ib_srq, struct ib_srq_attr *srq_attr)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kalesh AP kalesh-anakkur.purayil@broadcom.com
[ Upstream commit 80dde187f734cf9ccf988d5c2ef1a46b990660fd ]
Before populating the response, driver has to check the status of HWRM command.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: Kalesh AP kalesh-anakkur.purayil@broadcom.com Signed-off-by: Selvin Xavier selvin.xavier@broadcom.com Link: https://lore.kernel.org/r/1705985677-15551-6-git-send-email-selvin.xavier@br... Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/bnxt_re/qplib_fp.c b/drivers/infiniband/hw/bnxt_re/qplib_fp.c index abbabea7f5fa3..2a62239187622 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_fp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_fp.c @@ -748,7 +748,8 @@ int bnxt_qplib_query_srq(struct bnxt_qplib_res *res, bnxt_qplib_fill_cmdqmsg(&msg, &req, &resp, &sbuf, sizeof(req), sizeof(resp), 0); rc = bnxt_qplib_rcfw_send_message(rcfw, &msg); - srq->threshold = le16_to_cpu(sb->srq_limit); + if (!rc) + srq->threshold = le16_to_cpu(sb->srq_limit); dma_free_coherent(&rcfw->pdev->dev, sbuf.size, sbuf.sb, sbuf.dma_addr);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Zhang markzhang@nvidia.com
[ Upstream commit 43fdbd140238d44e7e847232719fef7d20f9d326 ]
debugfs entries for RRoCE general CC parameters must be exposed only when they are supported, otherwise when accessing them there may be a syndrome error in kernel log, for example:
$ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument $ dmesg mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22)
Fixes: 66fb1d5df6ac ("IB/mlx5: Extend debug control for CC parameters") Reviewed-by: Edward Srouji edwards@nvidia.com Signed-off-by: Mark Zhang markzhang@nvidia.com Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.170643393... Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/cong.c | 6 ++++++ include/linux/mlx5/mlx5_ifc.h | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/mlx5/cong.c b/drivers/infiniband/hw/mlx5/cong.c index f87531318feb8..a78a067e3ce7f 100644 --- a/drivers/infiniband/hw/mlx5/cong.c +++ b/drivers/infiniband/hw/mlx5/cong.c @@ -458,6 +458,12 @@ void mlx5_ib_init_cong_debugfs(struct mlx5_ib_dev *dev, u32 port_num) dbg_cc_params->root = debugfs_create_dir("cc_params", mlx5_debugfs_get_dev_root(mdev));
for (i = 0; i < MLX5_IB_DBG_CC_MAX; i++) { + if ((i == MLX5_IB_DBG_CC_GENERAL_RTT_RESP_DSCP_VALID || + i == MLX5_IB_DBG_CC_GENERAL_RTT_RESP_DSCP)) + if (!MLX5_CAP_GEN(mdev, roce) || + !MLX5_CAP_ROCE(mdev, roce_cc_general)) + continue; + dbg_cc_params->params[i].offset = i; dbg_cc_params->params[i].dev = dev; dbg_cc_params->params[i].port_num = port_num; diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index fb8d26a15df47..77cd2e13724e7 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -1103,7 +1103,7 @@ struct mlx5_ifc_roce_cap_bits { u8 sw_r_roce_src_udp_port[0x1]; u8 fl_rc_qp_when_roce_disabled[0x1]; u8 fl_rc_qp_when_roce_enabled[0x1]; - u8 reserved_at_7[0x1]; + u8 roce_cc_general[0x1]; u8 qp_ooo_transmit_default[0x1]; u8 reserved_at_9[0x15]; u8 qp_ts_format[0x2];
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut marex@denx.de
[ Upstream commit f03869698bc3bd6d9d2d9f216b20da08a8c2508a ]
UART4 is used as CM7 coprocessor debug UART and may not be accessible from Linux in case it is protected by RDC. The RDC protection is set up by the platform firmware. UART4 is not used on this platform by Linux. Disable UART4 by default to prevent boot hangs, which occur when the RDC protection is in place.
Fixes: 562d222f23f0 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC") Signed-off-by: Marek Vasut marex@denx.de Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts index d98a040860a48..5828c9d7821de 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts @@ -486,7 +486,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; + status = "disabled"; };
&usb3_phy0 {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mike Marciniszyn mike.marciniszyn@intel.com
[ Upstream commit bd97cea7b18a0a553773af806dfbfac27a7c4acb ]
KASAN testing revealed the following issue assocated with freeing an IRQ.
[50006.466686] Call Trace: [50006.466691] <IRQ> [50006.489538] dump_stack+0x5c/0x80 [50006.493475] print_address_description.constprop.6+0x1a/0x150 [50006.499872] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.505742] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.511644] kasan_report.cold.11+0x7f/0x118 [50006.516572] ? irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.522473] irdma_sc_process_ceq+0x483/0x790 [irdma] [50006.528232] irdma_process_ceq+0xb2/0x400 [irdma] [50006.533601] ? irdma_hw_flush_wqes_callback+0x370/0x370 [irdma] [50006.540298] irdma_ceq_dpc+0x44/0x100 [irdma] [50006.545306] tasklet_action_common.isra.14+0x148/0x2c0 [50006.551096] __do_softirq+0x1d0/0xaf8 [50006.555396] irq_exit_rcu+0x219/0x260 [50006.559670] irq_exit+0xa/0x20 [50006.563320] smp_apic_timer_interrupt+0x1bf/0x690 [50006.568645] apic_timer_interrupt+0xf/0x20 [50006.573341] </IRQ>
The issue is that a tasklet could be pending on another core racing the delete of the irq.
Fix by insuring any scheduled tasklet is killed after deleting the irq.
Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions") Signed-off-by: Mike Marciniszyn mike.marciniszyn@intel.com Signed-off-by: Shiraz Saleem shiraz.saleem@intel.com Signed-off-by: Sindhu Devale sindhu.devale@intel.com Link: https://lore.kernel.org/r/20240131233849.400285-2-sindhu.devale@intel.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/irdma/hw.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index bd4b2b8964444..2f8d18d8be3b7 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -570,6 +570,13 @@ static void irdma_destroy_irq(struct irdma_pci_f *rf, dev->irq_ops->irdma_dis_irq(dev, msix_vec->idx); irq_update_affinity_hint(msix_vec->irq, NULL); free_irq(msix_vec->irq, dev_id); + if (rf == dev_id) { + tasklet_kill(&rf->dpc_tasklet); + } else { + struct irdma_ceq *iwceq = (struct irdma_ceq *)dev_id; + + tasklet_kill(&iwceq->dpc_tasklet); + } }
/**
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shiraz Saleem shiraz.saleem@intel.com
[ Upstream commit ee107186bcfd25d7873258f3f75440e20f5e6416 ]
Validate that max_send_wr and max_recv_wr is within the supported range.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Change-Id: I2fc8b10292b641fddd20b36986a9dae90a93f4be Signed-off-by: Shiraz Saleem shiraz.saleem@intel.com Signed-off-by: Sindhu Devale sindhu.devale@intel.com Link: https://lore.kernel.org/r/20240131233849.400285-3-sindhu.devale@intel.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/irdma/verbs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index b5eb8d421988c..cb828e3da478e 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -839,7 +839,9 @@ static int irdma_validate_qp_attrs(struct ib_qp_init_attr *init_attr,
if (init_attr->cap.max_inline_data > uk_attrs->max_hw_inline || init_attr->cap.max_send_sge > uk_attrs->max_hw_wq_frags || - init_attr->cap.max_recv_sge > uk_attrs->max_hw_wq_frags) + init_attr->cap.max_recv_sge > uk_attrs->max_hw_wq_frags || + init_attr->cap.max_send_wr > uk_attrs->max_hw_wq_quanta || + init_attr->cap.max_recv_wr > uk_attrs->max_hw_rq_quanta) return -EINVAL;
if (rdma_protocol_roce(&iwdev->ibdev, 1)) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mustafa Ismail mustafa.ismail@intel.com
[ Upstream commit 666047f3ece9f991774c1fe9b223139a9ef8908d ]
The CQ shadow read threshold is currently not set for GEN 2. This could cause an invalid CQ overflow condition, so remove the GEN check that exclused GEN 1.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Mustafa Ismail mustafa.ismail@intel.com Signed-off-by: Shiraz Saleem shiraz.saleem@intel.com Signed-off-by: Sindhu Devale sindhu.devale@intel.com Link: https://lore.kernel.org/r/20240131233849.400285-4-sindhu.devale@intel.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/irdma/verbs.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/irdma/verbs.c b/drivers/infiniband/hw/irdma/verbs.c index cb828e3da478e..0b046c061742b 100644 --- a/drivers/infiniband/hw/irdma/verbs.c +++ b/drivers/infiniband/hw/irdma/verbs.c @@ -2186,9 +2186,8 @@ static int irdma_create_cq(struct ib_cq *ibcq, info.cq_base_pa = iwcq->kmem.pa; }
- if (dev->hw_attrs.uk_attrs.hw_rev >= IRDMA_GEN_2) - info.shadow_read_threshold = min(info.cq_uk_init_info.cq_size / 2, - (u32)IRDMA_MAX_CQ_READ_THRESH); + info.shadow_read_threshold = min(info.cq_uk_init_info.cq_size / 2, + (u32)IRDMA_MAX_CQ_READ_THRESH);
if (irdma_sc_cq_init(cq, &info)) { ibdev_dbg(&iwdev->ibdev, "VERBS: init cq fail\n");
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mustafa Ismail mustafa.ismail@intel.com
[ Upstream commit 630bdb6f28ca9e5ff79e244030170ac788478332 ]
Add IRDMA_AE_LLP_TOO_MANY_RNRS to the list of AE's processed as an abnormal asyncronous event.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs") Signed-off-by: Mustafa Ismail mustafa.ismail@intel.com Signed-off-by: Shiraz Saleem shiraz.saleem@intel.com Signed-off-by: Sindhu Devale sindhu.devale@gmail.com Link: https://lore.kernel.org/r/20240131233849.400285-5-sindhu.devale@intel.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/irdma/defs.h | 1 + drivers/infiniband/hw/irdma/hw.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/irdma/defs.h b/drivers/infiniband/hw/irdma/defs.h index 8fb752f2eda29..2cb4b96db7212 100644 --- a/drivers/infiniband/hw/irdma/defs.h +++ b/drivers/infiniband/hw/irdma/defs.h @@ -346,6 +346,7 @@ enum irdma_cqp_op_type { #define IRDMA_AE_LLP_TOO_MANY_KEEPALIVE_RETRIES 0x050b #define IRDMA_AE_LLP_DOUBT_REACHABILITY 0x050c #define IRDMA_AE_LLP_CONNECTION_ESTABLISHED 0x050e +#define IRDMA_AE_LLP_TOO_MANY_RNRS 0x050f #define IRDMA_AE_RESOURCE_EXHAUSTION 0x0520 #define IRDMA_AE_RESET_SENT 0x0601 #define IRDMA_AE_TERMINATE_SENT 0x0602 diff --git a/drivers/infiniband/hw/irdma/hw.c b/drivers/infiniband/hw/irdma/hw.c index 2f8d18d8be3b7..ad50b77282f8a 100644 --- a/drivers/infiniband/hw/irdma/hw.c +++ b/drivers/infiniband/hw/irdma/hw.c @@ -387,6 +387,7 @@ static void irdma_process_aeq(struct irdma_pci_f *rf) case IRDMA_AE_LLP_TOO_MANY_RETRIES: case IRDMA_AE_LCE_QP_CATASTROPHIC: case IRDMA_AE_LCE_FUNCTION_CATASTROPHIC: + case IRDMA_AE_LLP_TOO_MANY_RNRS: case IRDMA_AE_LCE_CQ_CATASTROPHIC: case IRDMA_AE_UDA_XMIT_DGRAM_TOO_LONG: default:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bart Van Assche bvanassche@acm.org
[ Upstream commit fdfa083549de5d50ebf7f6811f33757781e838c0 ]
Make loading ib_srpt with this parameter set work. The current behavior is that setting that parameter while loading the ib_srpt kernel module triggers the following kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> parse_one+0x18c/0x1d0 parse_args+0xe1/0x230 load_module+0x8de/0xa60 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x181/0x240 __x64_sys_finit_module+0x5a/0xb0 do_syscall_64+0x5f/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76
Cc: LiHonggang honggangli@163.com Reported-by: LiHonggang honggangli@163.com Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Bart Van Assche bvanassche@acm.org Link: https://lore.kernel.org/r/20240205004207.17031-1-bvanassche@acm.org Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/ulp/srpt/ib_srpt.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index 58f70cfec45a7..d2dce6ce30a94 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -79,12 +79,16 @@ module_param(srpt_srq_size, int, 0444); MODULE_PARM_DESC(srpt_srq_size, "Shared receive queue (SRQ) size.");
+static int srpt_set_u64_x(const char *buffer, const struct kernel_param *kp) +{ + return kstrtou64(buffer, 16, (u64 *)kp->arg); +} static int srpt_get_u64_x(char *buffer, const struct kernel_param *kp) { return sprintf(buffer, "0x%016llx\n", *(u64 *)kp->arg); } -module_param_call(srpt_service_guid, NULL, srpt_get_u64_x, &srpt_service_guid, - 0444); +module_param_call(srpt_service_guid, srpt_set_u64_x, srpt_get_u64_x, + &srpt_service_guid, 0444); MODULE_PARM_DESC(srpt_service_guid, "Using this value for ioc_guid, id_ext, and cm_listen_id instead of using the node_guid of the first HCA.");
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexander Stein alexander.stein@ew.tq-group.com
[ Upstream commit a620a7f2ae8b08c5beea6369f61e87064ee222dc ]
IOVDD is supplied by 1.8V, fix the referenced regulator.
Fixes: d8f9d8126582d ("arm64: dts: imx8mp: Add analog audio output on i.MX8MP TQMa8MPxL/MBa8MPxL") Signed-off-by: Alexander Stein alexander.stein@ew.tq-group.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 4240e20d38ac3..258e90cc16ff3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -168,6 +168,13 @@ enable-active-high; };
+ reg_vcc_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + reg_vcc_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -464,7 +471,7 @@ clock-names = "mclk"; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; - iov-supply = <®_vcc_3v3>; + iov-supply = <®_vcc_1v8>; ldoin-supply = <®_vcc_3v3>; };
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lucas Stach l.stach@pengutronix.de
[ Upstream commit 7bca405c986075c99b9f729d3587b5c45db39d01 ]
When the range parsing was open-coded the number of u32 entries to parse had to be a multiple of 4 and the driver checks this. With the range parsing converted to the range parser the counting changes from individual u32 entries to a complete range, so the check must not reject counts not divisible by 4.
Fixes: 2a88e4792c6d ("bus: imx-weim: Remove open coded "ranges" parsing") Signed-off-by: Lucas Stach l.stach@pengutronix.de Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/imx-weim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bus/imx-weim.c b/drivers/bus/imx-weim.c index 42c9386a7b423..f9fd1582f150d 100644 --- a/drivers/bus/imx-weim.c +++ b/drivers/bus/imx-weim.c @@ -117,7 +117,7 @@ static int imx_weim_gpr_setup(struct platform_device *pdev) i++; }
- if (i == 0 || i % 4) + if (i == 0) goto err;
for (i = 0; i < ARRAY_SIZE(gprvals); i++) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joao Martins joao.m.martins@oracle.com
[ Upstream commit a4ab7dedaee0e39b15653c5fd0367e420739f7ef ]
Dirty IOMMU hugepages reported on a base page page-size granularity can lead to an attempt to set dirty pages in the bitmap beyond the limits that are pinned.
Bounds check the page index of the array we are trying to access is within the limits before we kmap() and return otherwise.
While it is also a defensive check, this is also in preparation to defer setting bits (outside the mapped range) to the next iteration(s) when the pages become available.
Fixes: b058ea3ab5af ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries") Link: https://lore.kernel.org/r/20240202133415.23819-2-joao.m.martins@oracle.com Signed-off-by: Joao Martins joao.m.martins@oracle.com Tested-by: Avihai Horon avihaih@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommufd/iova_bitmap.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/iommu/iommufd/iova_bitmap.c b/drivers/iommu/iommufd/iova_bitmap.c index 0a92c9eeaf7f5..a3606b4c22292 100644 --- a/drivers/iommu/iommufd/iova_bitmap.c +++ b/drivers/iommu/iommufd/iova_bitmap.c @@ -409,6 +409,7 @@ void iova_bitmap_set(struct iova_bitmap *bitmap, mapped->pgshift) + mapped->pgoff * BITS_PER_BYTE; unsigned long last_bit = (((iova + length - 1) - mapped->iova) >> mapped->pgshift) + mapped->pgoff * BITS_PER_BYTE; + unsigned long last_page_idx = mapped->npages - 1;
do { unsigned int page_idx = cur_bit / BITS_PER_PAGE; @@ -417,6 +418,9 @@ void iova_bitmap_set(struct iova_bitmap *bitmap, last_bit - cur_bit + 1); void *kaddr;
+ if (unlikely(page_idx > last_page_idx)) + break; + kaddr = kmap_local_page(mapped->pages[page_idx]); bitmap_set(kaddr, offset, nbits); kunmap_local(kaddr);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joao Martins joao.m.martins@oracle.com
[ Upstream commit d18411ec305728c6371806c4fb09be07016aad0b ]
iova_bitmap_mapped_length() don't deal correctly with the small bitmaps (< 2M bitmaps) when the starting address isn't u64 aligned, leading to skipping a tiny part of the IOVA range. This is materialized as not marking data dirty that should otherwise have been.
Fix that by using a u8 * in the internal state of IOVA bitmap. Most of the data structures use the type of the bitmap to adjust its indexes, thus changing the type of the bitmap decreases the granularity of the bitmap indexes.
Fixes: b058ea3ab5af ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries") Link: https://lore.kernel.org/r/20240202133415.23819-3-joao.m.martins@oracle.com Signed-off-by: Joao Martins joao.m.martins@oracle.com Tested-by: Avihai Horon avihaih@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommufd/iova_bitmap.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/iommu/iommufd/iova_bitmap.c b/drivers/iommu/iommufd/iova_bitmap.c index a3606b4c22292..9d42ab51a6bb3 100644 --- a/drivers/iommu/iommufd/iova_bitmap.c +++ b/drivers/iommu/iommufd/iova_bitmap.c @@ -100,7 +100,7 @@ struct iova_bitmap { struct iova_bitmap_map mapped;
/* userspace address of the bitmap */ - u64 __user *bitmap; + u8 __user *bitmap;
/* u64 index that @mapped points to */ unsigned long mapped_base_index; @@ -162,7 +162,7 @@ static int iova_bitmap_get(struct iova_bitmap *bitmap) { struct iova_bitmap_map *mapped = &bitmap->mapped; unsigned long npages; - u64 __user *addr; + u8 __user *addr; long ret;
/* @@ -247,7 +247,7 @@ struct iova_bitmap *iova_bitmap_alloc(unsigned long iova, size_t length,
mapped = &bitmap->mapped; mapped->pgshift = __ffs(page_size); - bitmap->bitmap = data; + bitmap->bitmap = (u8 __user *)data; bitmap->mapped_total_index = iova_bitmap_offset_to_index(bitmap, length - 1) + 1; bitmap->iova = iova; @@ -304,7 +304,7 @@ static unsigned long iova_bitmap_mapped_remaining(struct iova_bitmap *bitmap)
remaining = bitmap->mapped_total_index - bitmap->mapped_base_index; remaining = min_t(unsigned long, remaining, - bytes / sizeof(*bitmap->bitmap)); + DIV_ROUND_UP(bytes, sizeof(*bitmap->bitmap)));
return remaining; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joao Martins joao.m.martins@oracle.com
[ Upstream commit 2780025e01e2e1c92f83ee7da91d9727c2e58a3e ]
IOVA bitmap is a zero-copy scheme of recording dirty bits that iterate the different bitmap user pages at chunks of a maximum of PAGE_SIZE/sizeof(struct page*) pages.
When the iterations are split up into 64G, the end of the range may be broken up in a way that's aligned with a non base page PTE size. This leads to only part of the huge page being recorded in the bitmap. Note that in pratice this is only a problem for IOMMU dirty tracking i.e. when the backing PTEs are in IOMMU hugepages and the bitmap is in base page granularity. So far this not something that affects VF dirty trackers (which reports and records at the same granularity).
To fix that, if there is a remainder of bits left to set in which the current IOVA bitmap doesn't cover, make a copy of the bitmap structure and iterate-and-set the rest of the bits remaining. Finally, when advancing the iterator, skip all the bits that were set ahead.
Link: https://lore.kernel.org/r/20240202133415.23819-5-joao.m.martins@oracle.com Reported-by: Avihai Horon avihaih@nvidia.com Fixes: f35f22cc760e ("iommu/vt-d: Access/Dirty bit support for SS domains") Fixes: 421a511a293f ("iommu/amd: Access/Dirty bit support in IOPTEs") Signed-off-by: Joao Martins joao.m.martins@oracle.com Tested-by: Avihai Horon avihaih@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommufd/iova_bitmap.c | 43 +++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
diff --git a/drivers/iommu/iommufd/iova_bitmap.c b/drivers/iommu/iommufd/iova_bitmap.c index 9d42ab51a6bb3..b370e8ee88665 100644 --- a/drivers/iommu/iommufd/iova_bitmap.c +++ b/drivers/iommu/iommufd/iova_bitmap.c @@ -113,6 +113,9 @@ struct iova_bitmap {
/* length of the IOVA range for the whole bitmap */ size_t length; + + /* length of the IOVA range set ahead the pinned pages */ + unsigned long set_ahead_length; };
/* @@ -341,6 +344,32 @@ static bool iova_bitmap_done(struct iova_bitmap *bitmap) return bitmap->mapped_base_index >= bitmap->mapped_total_index; }
+static int iova_bitmap_set_ahead(struct iova_bitmap *bitmap, + size_t set_ahead_length) +{ + int ret = 0; + + while (set_ahead_length > 0 && !iova_bitmap_done(bitmap)) { + unsigned long length = iova_bitmap_mapped_length(bitmap); + unsigned long iova = iova_bitmap_mapped_iova(bitmap); + + ret = iova_bitmap_get(bitmap); + if (ret) + break; + + length = min(length, set_ahead_length); + iova_bitmap_set(bitmap, iova, length); + + set_ahead_length -= length; + bitmap->mapped_base_index += + iova_bitmap_offset_to_index(bitmap, length - 1) + 1; + iova_bitmap_put(bitmap); + } + + bitmap->set_ahead_length = 0; + return ret; +} + /* * Advances to the next range, releases the current pinned * pages and pins the next set of bitmap pages. @@ -357,6 +386,15 @@ static int iova_bitmap_advance(struct iova_bitmap *bitmap) if (iova_bitmap_done(bitmap)) return 0;
+ /* Iterate, set and skip any bits requested for next iteration */ + if (bitmap->set_ahead_length) { + int ret; + + ret = iova_bitmap_set_ahead(bitmap, bitmap->set_ahead_length); + if (ret) + return ret; + } + /* When advancing the index we pin the next set of bitmap pages */ return iova_bitmap_get(bitmap); } @@ -426,5 +464,10 @@ void iova_bitmap_set(struct iova_bitmap *bitmap, kunmap_local(kaddr); cur_bit += nbits; } while (cur_bit <= last_bit); + + if (unlikely(cur_bit <= last_bit)) { + bitmap->set_ahead_length = + ((last_bit - cur_bit + 1) << bitmap->mapped.pgshift); + } } EXPORT_SYMBOL_NS_GPL(iova_bitmap_set, IOMMUFD);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Joao Martins joao.m.martins@oracle.com
[ Upstream commit 4bbcbc6ea2fa379632a24c14cfb47aa603816ac6 ]
For small bitmaps that aren't PAGE_SIZE aligned *and* that are less than 512 pages in bitmap length, use an extra page to be able to cover the entire range e.g. [1M..3G] which would be iterated more efficiently in a single iteration, rather than two.
Fixes: b058ea3ab5af ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries") Link: https://lore.kernel.org/r/20240202133415.23819-10-joao.m.martins@oracle.com Signed-off-by: Joao Martins joao.m.martins@oracle.com Tested-by: Avihai Horon avihaih@nvidia.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommufd/iova_bitmap.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/iommufd/iova_bitmap.c b/drivers/iommu/iommufd/iova_bitmap.c index b370e8ee88665..db8c46bee1559 100644 --- a/drivers/iommu/iommufd/iova_bitmap.c +++ b/drivers/iommu/iommufd/iova_bitmap.c @@ -178,18 +178,19 @@ static int iova_bitmap_get(struct iova_bitmap *bitmap) bitmap->mapped_base_index) * sizeof(*bitmap->bitmap), PAGE_SIZE);
- /* - * We always cap at max number of 'struct page' a base page can fit. - * This is, for example, on x86 means 2M of bitmap data max. - */ - npages = min(npages, PAGE_SIZE / sizeof(struct page *)); - /* * Bitmap address to be pinned is calculated via pointer arithmetic * with bitmap u64 word index. */ addr = bitmap->bitmap + bitmap->mapped_base_index;
+ /* + * We always cap at max number of 'struct page' a base page can fit. + * This is, for example, on x86 means 2M of bitmap data max. + */ + npages = min(npages + !!offset_in_page(addr), + PAGE_SIZE / sizeof(struct page *)); + ret = pin_user_pages_fast((unsigned long)addr, npages, FOLL_WRITE, mapped->pages); if (ret <= 0)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kamal Heib kheib@redhat.com
[ Upstream commit 5ba4e6d5863c53e937f49932dee0ecb004c65928 ]
Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail.
-----------[ cut here ]----------- WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3 ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt] CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022 RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286 RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016 RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80 R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? ib_uverbs_close+0x1f/0xb0 [ib_uverbs] ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? __warn+0x81/0x110 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? report_bug+0x10a/0x140 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ib_uverbs_close+0x1f/0xb0 [ib_uverbs] __fput+0x94/0x250 task_work_run+0x5c/0x90 do_exit+0x270/0x4a0 do_group_exit+0x2d/0x90 get_signal+0x87c/0x8c0 arch_do_signal_or_restart+0x25/0x100 ? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs] exit_to_user_mode_loop+0x9c/0x130 exit_to_user_mode_prepare+0xb6/0x100 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 ? common_interrupt+0x43/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x1470abe3ec6b Code: Unable to access opcode bytes at RIP 0x1470abe3ec41. RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004 RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00 R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358 R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470 </TASK> --[ end trace 888a9b92e04c5c97 ]--
Fixes: df15856132bc ("RDMA/qedr: restructure functions that create/destroy QPs") Signed-off-by: Kamal Heib kheib@redhat.com Link: https://lore.kernel.org/r/20240208223628.2040841-1-kheib@redhat.com Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/qedr/verbs.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/verbs.c b/drivers/infiniband/hw/qedr/verbs.c index 7887a6786ed43..f118ce0a9a617 100644 --- a/drivers/infiniband/hw/qedr/verbs.c +++ b/drivers/infiniband/hw/qedr/verbs.c @@ -1879,8 +1879,17 @@ static int qedr_create_user_qp(struct qedr_dev *dev, /* RQ - read access only (0) */ rc = qedr_init_user_queue(udata, dev, &qp->urq, ureq.rq_addr, ureq.rq_len, true, 0, alloc_and_init); - if (rc) + if (rc) { + ib_umem_release(qp->usq.umem); + qp->usq.umem = NULL; + if (rdma_protocol_roce(&dev->ibdev, 1)) { + qedr_free_pbl(dev, &qp->usq.pbl_info, + qp->usq.pbl_tbl); + } else { + kfree(qp->usq.pbl_tbl); + } return rc; + } }
memset(&in_params, 0, sizeof(in_params));
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Stuebner heiko.stuebner@cherry.de
[ Upstream commit 334bf0710c98d391f4067b72f535d6c4c84dfb6f ]
The px30 has two spi controllers with two chip-selects each. The num-cs property is specified as the total number of chip selects a controllers has and is used since 2020 to find uses of chipselects outside that range in the Rockchip spi driver.
Without the property set, the default is 1, so spi devices using the second chipselect will not be created.
Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods") Signed-off-by: Heiko Stuebner heiko.stuebner@cherry.de Reviewed-by: Quentin Schulz quentin.schulz@theobroma-systems.com Link: https://lore.kernel.org/r/20240119101656.965744-1-heiko@sntech.de Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/px30.dtsi | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 42ce78beb4134..20955556b624d 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -632,6 +632,7 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&dmac 12>, <&dmac 13>; dma-names = "tx", "rx"; + num-cs = <2>; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>; #address-cells = <1>; @@ -647,6 +648,7 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&dmac 14>, <&dmac 15>; dma-names = "tx", "rx"; + num-cs = <2>; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>; #address-cells = <1>;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Morgan macromorgan@hotmail.com
[ Upstream commit c22d03a95b0d815cd186302fdd93f74d99f1c914 ]
Correct the names given to a few of the GPIO pins. The original names were unknowingly based on the header from a pre-production board. The production board has a slightly different pin assignment for the 40-pin GPIO header.
Fixes: 3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board") Signed-off-by: Chris Morgan macromorgan@hotmail.com Link: https://lore.kernel.org/r/20240125201943.90476-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 60f00ceb630e1..3b675fd0c5ea5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -196,13 +196,13 @@
&gpio1 { gpio-line-names = /* GPIO1 A0-A7 */ - "HEADER_27_3v3", "HEADER_28_3v3", "", "", + "HEADER_27_3v3", "", "", "", "HEADER_29_1v8", "", "HEADER_7_1v8", "", /* GPIO1 B0-B7 */ "", "HEADER_31_1v8", "HEADER_33_1v8", "", "HEADER_11_1v8", "HEADER_13_1v8", "", "", /* GPIO1 C0-C7 */ - "", "", "", "", + "", "HEADER_28_3v3", "", "", "", "", "", "", /* GPIO1 D0-D7 */ "", "", "", "", @@ -226,11 +226,11 @@
&gpio4 { gpio-line-names = /* GPIO4 A0-A7 */ - "", "", "HEADER_37_3v3", "HEADER_32_3v3", - "HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3", + "", "", "HEADER_37_3v3", "HEADER_8_3v3", + "HEADER_10_3v3", "", "HEADER_32_3v3", "HEADER_35_3v3", /* GPIO4 B0-B7 */ "", "", "", "HEADER_40_3v3", - "HEADER_8_3v3", "HEADER_10_3v3", "", "", + "HEADER_38_3v3", "HEADER_36_3v3", "", "", /* GPIO4 C0-C7 */ "", "", "", "", "", "", "", "",
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sebastian Andrzej Siewior bigeasy@linutronix.de
[ Upstream commit 2127c604383666675789fd4a5fc2aead46c73aad ]
xsk_build_skb() allocates a page and adds it to the skb via skb_add_rx_frag() and specifies 0 for truesize. This leads to a warning in skb_add_rx_frag() with CONFIG_DEBUG_NET enabled because size is larger than truesize.
Increasing truesize requires to add the same amount to socket's sk_wmem_alloc counter in order not to underflow the counter during release in the destructor (sock_wfree()).
Pass the size of the allocated page as truesize to skb_add_rx_frag(). Add this mount to socket's sk_wmem_alloc counter.
Fixes: cf24f5a5feea ("xsk: add support for AF_XDP multi-buffer on Tx path") Signed-off-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Maciej Fijalkowski maciej.fijalkowski@intel.com Link: https://lore.kernel.org/bpf/20240202163221.2488589-1-bigeasy@linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/xdp/xsk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c index 688e641cd2784..da1582de6e84a 100644 --- a/net/xdp/xsk.c +++ b/net/xdp/xsk.c @@ -711,7 +711,8 @@ static struct sk_buff *xsk_build_skb(struct xdp_sock *xs, memcpy(vaddr, buffer, len); kunmap_local(vaddr);
- skb_add_rx_frag(skb, nr_frags, page, 0, len, 0); + skb_add_rx_frag(skb, nr_frags, page, 0, len, PAGE_SIZE); + refcount_add(PAGE_SIZE, &xs->sk.sk_wmem_alloc); } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit eb5c7465c3240151cd42a55c7ace9da0026308a1 ]
clang-16 notices that srpt_qp_event() gets called through an incompatible pointer here:
drivers/infiniband/ulp/srpt/ib_srpt.c:1815:5: error: cast from 'void (*)(struct ib_event *, struct srpt_rdma_ch *)' to 'void (*)(struct ib_event *, void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 1815 | = (void(*)(struct ib_event *, void*))srpt_qp_event;
Change srpt_qp_event() to use the correct prototype and adjust the argument inside of it.
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Arnd Bergmann arnd@arndb.de Link: https://lore.kernel.org/r/20240213100728.458348-1-arnd@kernel.org Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Leon Romanovsky leon@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/ulp/srpt/ib_srpt.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/ulp/srpt/ib_srpt.c b/drivers/infiniband/ulp/srpt/ib_srpt.c index d2dce6ce30a94..040234c01be4d 100644 --- a/drivers/infiniband/ulp/srpt/ib_srpt.c +++ b/drivers/infiniband/ulp/srpt/ib_srpt.c @@ -214,10 +214,12 @@ static const char *get_ch_state_name(enum rdma_ch_state s) /** * srpt_qp_event - QP event callback function * @event: Description of the event that occurred. - * @ch: SRPT RDMA channel. + * @ptr: SRPT RDMA channel. */ -static void srpt_qp_event(struct ib_event *event, struct srpt_rdma_ch *ch) +static void srpt_qp_event(struct ib_event *event, void *ptr) { + struct srpt_rdma_ch *ch = ptr; + pr_debug("QP event %d on ch=%p sess_name=%s-%d state=%s\n", event->event, ch, ch->sess_name, ch->qp->qp_num, get_ch_state_name(ch->state)); @@ -1811,8 +1813,7 @@ static int srpt_create_ch_ib(struct srpt_rdma_ch *ch) ch->cq_size = ch->rq_size + sq_size;
qp_init->qp_context = (void *)ch; - qp_init->event_handler - = (void(*)(struct ib_event *, void*))srpt_qp_event; + qp_init->event_handler = srpt_qp_event; qp_init->send_cq = ch->cq; qp_init->recv_cq = ch->cq; qp_init->sq_sig_type = IB_SIGNAL_REQ_WR;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gianmarco Lusvardi glusvardi@posteo.net
[ Upstream commit e37243b65d528a8a9f8b9a57a43885f8e8dfc15c ]
The bpf_doc script refers to the GPL as the "GNU Privacy License". I strongly suspect that the author wanted to refer to the GNU General Public License, under which the Linux kernel is released, as, to the best of my knowledge, there is no license named "GNU Privacy License". This patch corrects the license name in the script accordingly.
Fixes: 56a092c89505 ("bpf: add script and prepare bpf.h for new helpers documentation") Signed-off-by: Gianmarco Lusvardi glusvardi@posteo.net Signed-off-by: Daniel Borkmann daniel@iogearbox.net Reviewed-by: Quentin Monnet quentin@isovalent.com Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/bpf_doc.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/bpf_doc.py b/scripts/bpf_doc.py index 61b7dddedc461..0669bac5e900e 100755 --- a/scripts/bpf_doc.py +++ b/scripts/bpf_doc.py @@ -513,7 +513,7 @@ eBPF programs can have an associated license, passed along with the bytecode instructions to the kernel when the programs are loaded. The format for that string is identical to the one in use for kernel modules (Dual licenses, such as "Dual BSD/GPL", may be used). Some helper functions are only accessible to -programs that are compatible with the GNU Privacy License (GPL). +programs that are compatible with the GNU General Public License (GNU GPL).
In order to use such helpers, the eBPF program must be loaded with the correct license string passed (via **attr**) to the **bpf**\ () system call, and this
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter dan.carpenter@linaro.org
[ Upstream commit f2dced9d1992824d677593072bc20eccf66ac5d5 ]
There is one goto where "sched_clk_scaling_suspend_work" is true but "scale_up" is uninitialized. It leads to a Smatch uninitialized variable warning:
drivers/ufs/core/ufshcd.c:1589 ufshcd_devfreq_target() error: uninitialized symbol 'scale_up'.
Fixes: 1d969731b87f ("scsi: ufs: core: Only suspend clock scaling if scaling down") Signed-off-by: Dan Carpenter dan.carpenter@linaro.org Link: https://lore.kernel.org/r/c787d37f-1107-4512-8991-bccf80e74a35@moroto.mounta... Reviewed-by: Peter Wang peter.wang@mediatek.com Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ufs/core/ufshcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index e197b9828c3c3..d2d760143ca30 100644 --- a/drivers/ufs/core/ufshcd.c +++ b/drivers/ufs/core/ufshcd.c @@ -1456,7 +1456,7 @@ static int ufshcd_devfreq_target(struct device *dev, int ret = 0; struct ufs_hba *hba = dev_get_drvdata(dev); ktime_t start; - bool scale_up, sched_clk_scaling_suspend_work = false; + bool scale_up = false, sched_clk_scaling_suspend_work = false; struct list_head *clk_list = &hba->clk_list_head; struct ufs_clk_info *clki; unsigned long irq_flags;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Don Brace don.brace@microchip.com
[ Upstream commit 5761eb9761d2d5fe8248a9b719efc4d8baf1f24a ]
Correct blk-mq registration issue with module parameter disable_managed_interrupts enabled.
When we turn off the default PCI_IRQ_AFFINITY flag, the driver needs to register with blk-mq using blk_mq_map_queues(). The driver is currently calling blk_mq_pci_map_queues() which results in a stack trace and possibly undefined behavior.
Stack Trace: [ 7.860089] scsi host2: smartpqi [ 7.871934] WARNING: CPU: 0 PID: 238 at block/blk-mq-pci.c:52 blk_mq_pci_map_queues+0xca/0xd0 [ 7.889231] Modules linked in: sd_mod t10_pi sg uas smartpqi(+) crc32c_intel scsi_transport_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ 7.924755] CPU: 0 PID: 238 Comm: kworker/0:3 Not tainted 4.18.0-372.88.1.el8_6_smartpqi_test.x86_64 #1 [ 7.944336] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 03/08/2022 [ 7.963026] Workqueue: events work_for_cpu_fn [ 7.978275] RIP: 0010:blk_mq_pci_map_queues+0xca/0xd0 [ 7.978278] Code: 48 89 de 89 c7 e8 f6 0f 4f 00 3b 05 c4 b7 8e 01 72 e1 5b 31 c0 5d 41 5c 41 5d 41 5e 41 5f e9 7d df 73 00 31 c0 e9 76 df 73 00 <0f> 0b eb bc 90 90 0f 1f 44 00 00 41 57 49 89 ff 41 56 41 55 41 54 [ 7.978280] RSP: 0018:ffffa95fc3707d50 EFLAGS: 00010216 [ 7.978283] RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000010 [ 7.978284] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffff9190c32d4310 [ 7.978286] RBP: 0000000000000000 R08: ffffa95fc3707d38 R09: ffff91929b81ac00 [ 7.978287] R10: 0000000000000001 R11: ffffa95fc3707ac0 R12: 0000000000000000 [ 7.978288] R13: ffff9190c32d4000 R14: 00000000ffffffff R15: ffff9190c4c950a8 [ 7.978290] FS: 0000000000000000(0000) GS:ffff9193efc00000(0000) knlGS:0000000000000000 [ 7.978292] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.172814] CR2: 000055d11166c000 CR3: 00000002dae10002 CR4: 00000000007706f0 [ 8.172816] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8.172817] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8.172818] PKRU: 55555554 [ 8.172819] Call Trace: [ 8.172823] blk_mq_alloc_tag_set+0x12e/0x310 [ 8.264339] scsi_add_host_with_dma.cold.9+0x30/0x245 [ 8.279302] pqi_ctrl_init+0xacf/0xc8e [smartpqi] [ 8.294085] ? pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.309015] pqi_pci_probe+0x480/0x4c8 [smartpqi] [ 8.323286] local_pci_probe+0x42/0x80 [ 8.337855] work_for_cpu_fn+0x16/0x20 [ 8.351193] process_one_work+0x1a7/0x360 [ 8.364462] ? create_worker+0x1a0/0x1a0 [ 8.379252] worker_thread+0x1ce/0x390 [ 8.392623] ? create_worker+0x1a0/0x1a0 [ 8.406295] kthread+0x10a/0x120 [ 8.418428] ? set_kthread_struct+0x50/0x50 [ 8.431532] ret_from_fork+0x1f/0x40 [ 8.444137] ---[ end trace 1bf0173d39354506 ]---
Fixes: cf15c3e734e8 ("scsi: smartpqi: Add module param to disable managed ints") Tested-by: Yogesh Chandra Pandey YogeshChandra.Pandey@microchip.com Reviewed-by: Scott Benesh scott.benesh@microchip.com Reviewed-by: Scott Teel scott.teel@microchip.com Reviewed-by: Mahesh Rajashekhara mahesh.rajashekhara@microchip.com Reviewed-by: Mike McGowen mike.mcgowen@microchip.com Reviewed-by: Kevin Barnett kevin.barnett@microchip.com Signed-off-by: Don Brace don.brace@microchip.com Link: https://lore.kernel.org/r/20240213162200.1875970-2-don.brace@microchip.com Reviewed-by: Tomas Henzl thenzl@redhat.com Reviewed-by: Ewan D. Milne emilne@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/smartpqi/smartpqi_init.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c index 081bb2c098063..868453b18c9ae 100644 --- a/drivers/scsi/smartpqi/smartpqi_init.c +++ b/drivers/scsi/smartpqi/smartpqi_init.c @@ -6533,8 +6533,11 @@ static void pqi_map_queues(struct Scsi_Host *shost) { struct pqi_ctrl_info *ctrl_info = shost_to_hba(shost);
- blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT], + if (!ctrl_info->disable_managed_interrupts) + return blk_mq_pci_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT], ctrl_info->pci_dev, 0); + else + return blk_mq_map_queues(&shost->tag_set.map[HCTX_TYPE_DEFAULT]); }
static inline bool pqi_is_tape_changer_device(struct pqi_scsi_dev *device)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 9ddf190a7df77b77817f955fdb9c2ae9d1c9c9a3 ]
JAZZ_ESP is a bool kconfig symbol that selects SCSI_SPI_ATTRS. When CONFIG_SCSI=m, this results in SCSI_SPI_ATTRS=m while JAZZ_ESP=y, which causes many undefined symbol linker errors.
Fix this by only offering to build this driver when CONFIG_SCSI=y.
[mkp: JAZZ_ESP is unique in that it does not support being compiled as a module unlike the remaining SPI SCSI HBA drivers]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap rdunlap@infradead.org Link: https://lore.kernel.org/r/20240214055953.9612-1-rdunlap@infradead.org Cc: Thomas Bogendoerfer tsbogend@alpha.franken.de Cc: linux-mips@vger.kernel.org Cc: Arnd Bergmann arnd@arndb.de Cc: Masahiro Yamada masahiroy@kernel.org Cc: Nicolas Schier nicolas@fjasle.eu Cc: James E.J. Bottomley jejb@linux.ibm.com Cc: Martin K. Petersen martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org Cc: Geert Uytterhoeven geert@linux-m68k.org Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202402112222.Gl0udKyU-lkp@intel.com/ Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index addac7fbe37b9..9ce27092729c3 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1270,7 +1270,7 @@ source "drivers/scsi/arm/Kconfig"
config JAZZ_ESP bool "MIPS JAZZ FAS216 SCSI support" - depends on MACH_JAZZ && SCSI + depends on MACH_JAZZ && SCSI=y select SCSI_SPI_ATTRS help This is the driver for the onboard SCSI host adapter of MIPS Magnum
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobias Waldekranz tobias@waldekranz.com
[ Upstream commit dc489f86257cab5056e747344f17a164f63bff4b ]
Before this change, generation of the list of MDB events to replay would race against the creation of new group memberships, either from the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of br->mdb_list, the notification of their existence to switchdev event subscribers is deferred until a later point in time. So if a replay list was generated during a time that overlapped with such a window, it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally considered to be one single event. On destruction of the bridge, only a single membership deletion event was therefore sent. As a consequence of this, drivers which reference count memberships (at least DSA), would be left with orphan groups in their hardware database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events may still be pending on the deferred queue, they will already have been removed from br->mdb_list, so no duplicates can be generated in that scenario.
To a user this meant that old group memberships, from a bridge in which a port was previously attached, could be reanimated (in hardware) when the port joined a new bridge, without the new bridge's knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \ > ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0 root@infix-06-0b-00:~$ mvls atu ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a DEV:0 Marvell 88E6393X 33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . . 33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . . ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the port (x3) is notified of the host's membership twice: once via the original event and once via a replay. Since only a single delete notification is sent, the count remains at 1 when the bridge is destroyed.
Then add the same port (or another port belonging to the same hardware domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \ > ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be flooded, according to the policy of br1. But instead the old memberships are still active in the hardware database, causing the switch to only forward traffic to those groups towards the CPU (port 0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay list.
This prevents new memberships from showing up while we are generating the replay list. But it leaves the scenario in which a deferred event was already generated, but not delivered, before we grabbed the lock. Therefore:
2. Make sure that no deferred version of a replay event is already enqueued to the switchdev deferred queue, before adding it to the replay list, when replaying additions.
Fixes: 4f2673b3a2b6 ("net: bridge: add helper to replay port and host-joined mdb entries") Signed-off-by: Tobias Waldekranz tobias@waldekranz.com Reviewed-by: Vladimir Oltean olteanv@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/switchdev.h | 3 ++ net/bridge/br_switchdev.c | 74 ++++++++++++++++++++++++--------------- net/switchdev/switchdev.c | 73 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 122 insertions(+), 28 deletions(-)
diff --git a/include/net/switchdev.h b/include/net/switchdev.h index a43062d4c734b..8346b0d29542c 100644 --- a/include/net/switchdev.h +++ b/include/net/switchdev.h @@ -308,6 +308,9 @@ void switchdev_deferred_process(void); int switchdev_port_attr_set(struct net_device *dev, const struct switchdev_attr *attr, struct netlink_ext_ack *extack); +bool switchdev_port_obj_act_is_deferred(struct net_device *dev, + enum switchdev_notifier_type nt, + const struct switchdev_obj *obj); int switchdev_port_obj_add(struct net_device *dev, const struct switchdev_obj *obj, struct netlink_ext_ack *extack); diff --git a/net/bridge/br_switchdev.c b/net/bridge/br_switchdev.c index ee84e783e1dff..6a7cb01f121c7 100644 --- a/net/bridge/br_switchdev.c +++ b/net/bridge/br_switchdev.c @@ -595,21 +595,40 @@ br_switchdev_mdb_replay_one(struct notifier_block *nb, struct net_device *dev, }
static int br_switchdev_mdb_queue_one(struct list_head *mdb_list, + struct net_device *dev, + unsigned long action, enum switchdev_obj_id id, const struct net_bridge_mdb_entry *mp, struct net_device *orig_dev) { - struct switchdev_obj_port_mdb *mdb; + struct switchdev_obj_port_mdb mdb = { + .obj = { + .id = id, + .orig_dev = orig_dev, + }, + }; + struct switchdev_obj_port_mdb *pmdb;
- mdb = kzalloc(sizeof(*mdb), GFP_ATOMIC); - if (!mdb) - return -ENOMEM; + br_switchdev_mdb_populate(&mdb, mp);
- mdb->obj.id = id; - mdb->obj.orig_dev = orig_dev; - br_switchdev_mdb_populate(mdb, mp); - list_add_tail(&mdb->obj.list, mdb_list); + if (action == SWITCHDEV_PORT_OBJ_ADD && + switchdev_port_obj_act_is_deferred(dev, action, &mdb.obj)) { + /* This event is already in the deferred queue of + * events, so this replay must be elided, lest the + * driver receives duplicate events for it. This can + * only happen when replaying additions, since + * modifications are always immediately visible in + * br->mdb_list, whereas actual event delivery may be + * delayed. + */ + return 0; + } + + pmdb = kmemdup(&mdb, sizeof(mdb), GFP_ATOMIC); + if (!pmdb) + return -ENOMEM;
+ list_add_tail(&pmdb->obj.list, mdb_list); return 0; }
@@ -677,51 +696,50 @@ br_switchdev_mdb_replay(struct net_device *br_dev, struct net_device *dev, if (!br_opt_get(br, BROPT_MULTICAST_ENABLED)) return 0;
- /* We cannot walk over br->mdb_list protected just by the rtnl_mutex, - * because the write-side protection is br->multicast_lock. But we - * need to emulate the [ blocking ] calling context of a regular - * switchdev event, so since both br->multicast_lock and RCU read side - * critical sections are atomic, we have no choice but to pick the RCU - * read side lock, queue up all our events, leave the critical section - * and notify switchdev from blocking context. + if (adding) + action = SWITCHDEV_PORT_OBJ_ADD; + else + action = SWITCHDEV_PORT_OBJ_DEL; + + /* br_switchdev_mdb_queue_one() will take care to not queue a + * replay of an event that is already pending in the switchdev + * deferred queue. In order to safely determine that, there + * must be no new deferred MDB notifications enqueued for the + * duration of the MDB scan. Therefore, grab the write-side + * lock to avoid racing with any concurrent IGMP/MLD snooping. */ - rcu_read_lock(); + spin_lock_bh(&br->multicast_lock);
- hlist_for_each_entry_rcu(mp, &br->mdb_list, mdb_node) { + hlist_for_each_entry(mp, &br->mdb_list, mdb_node) { struct net_bridge_port_group __rcu * const *pp; const struct net_bridge_port_group *p;
if (mp->host_joined) { - err = br_switchdev_mdb_queue_one(&mdb_list, + err = br_switchdev_mdb_queue_one(&mdb_list, dev, action, SWITCHDEV_OBJ_ID_HOST_MDB, mp, br_dev); if (err) { - rcu_read_unlock(); + spin_unlock_bh(&br->multicast_lock); goto out_free_mdb; } }
- for (pp = &mp->ports; (p = rcu_dereference(*pp)) != NULL; + for (pp = &mp->ports; (p = mlock_dereference(*pp, br)) != NULL; pp = &p->next) { if (p->key.port->dev != dev) continue;
- err = br_switchdev_mdb_queue_one(&mdb_list, + err = br_switchdev_mdb_queue_one(&mdb_list, dev, action, SWITCHDEV_OBJ_ID_PORT_MDB, mp, dev); if (err) { - rcu_read_unlock(); + spin_unlock_bh(&br->multicast_lock); goto out_free_mdb; } } }
- rcu_read_unlock(); - - if (adding) - action = SWITCHDEV_PORT_OBJ_ADD; - else - action = SWITCHDEV_PORT_OBJ_DEL; + spin_unlock_bh(&br->multicast_lock);
list_for_each_entry(obj, &mdb_list, list) { err = br_switchdev_mdb_replay_one(nb, dev, diff --git a/net/switchdev/switchdev.c b/net/switchdev/switchdev.c index 5b045284849e0..c9189a970eec3 100644 --- a/net/switchdev/switchdev.c +++ b/net/switchdev/switchdev.c @@ -19,6 +19,35 @@ #include <linux/rtnetlink.h> #include <net/switchdev.h>
+static bool switchdev_obj_eq(const struct switchdev_obj *a, + const struct switchdev_obj *b) +{ + const struct switchdev_obj_port_vlan *va, *vb; + const struct switchdev_obj_port_mdb *ma, *mb; + + if (a->id != b->id || a->orig_dev != b->orig_dev) + return false; + + switch (a->id) { + case SWITCHDEV_OBJ_ID_PORT_VLAN: + va = SWITCHDEV_OBJ_PORT_VLAN(a); + vb = SWITCHDEV_OBJ_PORT_VLAN(b); + return va->flags == vb->flags && + va->vid == vb->vid && + va->changed == vb->changed; + case SWITCHDEV_OBJ_ID_PORT_MDB: + case SWITCHDEV_OBJ_ID_HOST_MDB: + ma = SWITCHDEV_OBJ_PORT_MDB(a); + mb = SWITCHDEV_OBJ_PORT_MDB(b); + return ma->vid == mb->vid && + ether_addr_equal(ma->addr, mb->addr); + default: + break; + } + + BUG(); +} + static LIST_HEAD(deferred); static DEFINE_SPINLOCK(deferred_lock);
@@ -307,6 +336,50 @@ int switchdev_port_obj_del(struct net_device *dev, } EXPORT_SYMBOL_GPL(switchdev_port_obj_del);
+/** + * switchdev_port_obj_act_is_deferred - Is object action pending? + * + * @dev: port device + * @nt: type of action; add or delete + * @obj: object to test + * + * Returns true if a deferred item is pending, which is + * equivalent to the action @nt on an object @obj. + * + * rtnl_lock must be held. + */ +bool switchdev_port_obj_act_is_deferred(struct net_device *dev, + enum switchdev_notifier_type nt, + const struct switchdev_obj *obj) +{ + struct switchdev_deferred_item *dfitem; + bool found = false; + + ASSERT_RTNL(); + + spin_lock_bh(&deferred_lock); + + list_for_each_entry(dfitem, &deferred, list) { + if (dfitem->dev != dev) + continue; + + if ((dfitem->func == switchdev_port_obj_add_deferred && + nt == SWITCHDEV_PORT_OBJ_ADD) || + (dfitem->func == switchdev_port_obj_del_deferred && + nt == SWITCHDEV_PORT_OBJ_DEL)) { + if (switchdev_obj_eq((const void *)dfitem->data, obj)) { + found = true; + break; + } + } + } + + spin_unlock_bh(&deferred_lock); + + return found; +} +EXPORT_SYMBOL_GPL(switchdev_port_obj_act_is_deferred); + static ATOMIC_NOTIFIER_HEAD(switchdev_notif_chain); static BLOCKING_NOTIFIER_HEAD(switchdev_blocking_notif_chain);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tobias Waldekranz tobias@waldekranz.com
[ Upstream commit f7a70d650b0b6b0134ccba763d672c8439d9f09b ]
When unoffloading a device, it is important to ensure that all relevant deferred events are delivered to it before it disassociates itself from the bridge.
Before this change, this was true for the normal case when a device maps 1:1 to a net_bridge_port, i.e.
br0 / swp0
When swp0 leaves br0, the call to switchdev_deferred_process() in del_nbp() makes sure to process any outstanding events while the device is still associated with the bridge.
In the case when the association is indirect though, i.e. when the device is attached to the bridge via an intermediate device, like a LAG...
br0 / lag0 / swp0
...then detaching swp0 from lag0 does not cause any net_bridge_port to be deleted, so there was no guarantee that all events had been processed before the device disassociated itself from the bridge.
Fix this by always synchronously processing all deferred events before signaling completion of unoffloading back to the driver.
Fixes: 4e51bf44a03a ("net: bridge: move the switchdev object replay helpers to "push" mode") Signed-off-by: Tobias Waldekranz tobias@waldekranz.com Reviewed-by: Vladimir Oltean olteanv@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/bridge/br_switchdev.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/net/bridge/br_switchdev.c b/net/bridge/br_switchdev.c index 6a7cb01f121c7..7b41ee8740cbb 100644 --- a/net/bridge/br_switchdev.c +++ b/net/bridge/br_switchdev.c @@ -804,6 +804,16 @@ static void nbp_switchdev_unsync_objs(struct net_bridge_port *p, br_switchdev_mdb_replay(br_dev, dev, ctx, false, blocking_nb, NULL);
br_switchdev_vlan_replay(br_dev, ctx, false, blocking_nb, NULL); + + /* Make sure that the device leaving this bridge has seen all + * relevant events before it is disassociated. In the normal + * case, when the device is directly attached to the bridge, + * this is covered by del_nbp(). If the association was indirect + * however, e.g. via a team or bond, and the device is leaving + * that intermediate device, then the bridge port remains in + * place. + */ + switchdev_deferred_process(); }
/* Let the bridge know that this port is offloaded, so that it can assign a
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuniyuki Iwashima kuniyu@amazon.com
[ Upstream commit 66b60b0c8c4a163b022a9f0ad6769b0fd3dc662f ]
syzkaller reported a warning [0] in inet_csk_destroy_sock() with no repro.
WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash);
However, the syzkaller's log hinted that connect() failed just before the warning due to FAULT_INJECTION. [1]
When connect() is called for an unbound socket, we search for an available ephemeral port. If a bhash bucket exists for the port, we call __inet_check_established() or __inet6_check_established() to check if the bucket is reusable.
If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num.
Later, we look up the corresponding bhash2 bucket and try to allocate it if it does not exist.
Although it rarely occurs in real use, if the allocation fails, we must revert the changes by check_established(). Otherwise, an unconnected socket could illegally occupy an ehash entry.
Note that we do not put tw back into ehash because sk might have already responded to a packet for tw and it would be better to free tw earlier under such memory presure.
[0]: WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Modules linked in: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05 RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40 RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8 RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0 R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000 FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) dccp_close (net/dccp/proto.c:1078) inet_release (net/ipv4/af_inet.c:434) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:377) __fput_sync (fs/file_table.c:462) __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e53852bb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44 RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000 R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170 </TASK>
[1]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f88f5 #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3748) kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867) inet_bind2_bucket_create (net/ipv4/inet_hashtables.c:135) __inet_hash_connect (net/ipv4/inet_hashtables.c:1100) dccp_v4_connect (net/dccp/ipv4.c:116) __inet_stream_connect (net/ipv4/af_inet.c:676) inet_stream_connect (net/ipv4/af_inet.c:747) __sys_connect_file (net/socket.c:2048 (discriminator 2)) __sys_connect (net/socket.c:2065) __x64_sys_connect (net/socket.c:2072) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e5284e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f03e4641cc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f03e5284e5d RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f03e52e5530 R15: 0000000000000000 </TASK>
Reported-by: syzkaller syzkaller@googlegroups.com Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.com Reviewed-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/inet_hashtables.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index a532f749e4778..9456bf9e2705b 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -1131,10 +1131,33 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, return 0;
error: + if (sk_hashed(sk)) { + spinlock_t *lock = inet_ehash_lockp(hinfo, sk->sk_hash); + + sock_prot_inuse_add(net, sk->sk_prot, -1); + + spin_lock(lock); + sk_nulls_del_node_init_rcu(sk); + spin_unlock(lock); + + sk->sk_hash = 0; + inet_sk(sk)->inet_sport = 0; + inet_sk(sk)->inet_num = 0; + + if (tw) + inet_twsk_bind_unhash(tw, hinfo); + } + spin_unlock(&head2->lock); if (tb_created) inet_bind_bucket_destroy(hinfo->bind_bucket_cachep, tb); - spin_unlock_bh(&head->lock); + spin_unlock(&head->lock); + + if (tw) + inet_twsk_deschedule_put(tw); + + local_bh_enable(); + return -ENOMEM; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit a9f80df4f51440303d063b55bb98720857693821 ]
This driver uses functions that are supplied by the Kconfig symbol PHYLIB, so select it to ensure that they are built as needed.
When CONFIG_ADIN1110=y and CONFIG_PHYLIB=m, there are multiple build (linker) errors that are resolved by this Kconfig change:
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_open': drivers/net/ethernet/adi/adin1110.c:933: undefined reference to `phy_start' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_probe_netdevs': drivers/net/ethernet/adi/adin1110.c:1603: undefined reference to `get_phy_device' ld: drivers/net/ethernet/adi/adin1110.c:1609: undefined reference to `phy_connect' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy': drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect' ld: drivers/net/ethernet/adi/adin1110.o: in function `devm_mdiobus_alloc': include/linux/phy.h:455: undefined reference to `devm_mdiobus_alloc_size' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_register_mdiobus': drivers/net/ethernet/adi/adin1110.c:529: undefined reference to `__devm_mdiobus_register' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_stop': drivers/net/ethernet/adi/adin1110.c:958: undefined reference to `phy_stop' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy': drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_adjust_link': drivers/net/ethernet/adi/adin1110.c:1077: undefined reference to `phy_print_status' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_ioctl': drivers/net/ethernet/adi/adin1110.c:790: undefined reference to `phy_do_ioctl' ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf60): undefined reference to `phy_ethtool_get_link_ksettings' ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf68): undefined reference to `phy_ethtool_set_link_ksettings'
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Randy Dunlap rdunlap@infradead.org Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202402070626.eZsfVHG5-lkp@intel.com/ Cc: Lennart Franzen lennart@lfdomain.com Cc: Alexandru Tachici alexandru.tachici@analog.com Cc: "David S. Miller" davem@davemloft.net Cc: Eric Dumazet edumazet@google.com Cc: Jakub Kicinski kuba@kernel.org Cc: Paolo Abeni pabeni@redhat.com Cc: netdev@vger.kernel.org Reviewed-by: Nuno Sa nuno.sa@analog.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/adi/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/adi/Kconfig b/drivers/net/ethernet/adi/Kconfig index da3bdd3025022..c91b4dcef4ec2 100644 --- a/drivers/net/ethernet/adi/Kconfig +++ b/drivers/net/ethernet/adi/Kconfig @@ -7,6 +7,7 @@ config NET_VENDOR_ADI bool "Analog Devices devices" default y depends on SPI + select PHYLIB help If you have a network (Ethernet) card belonging to this class, say Y.
On 27. 02. 24, 14:21, Greg Kroah-Hartman wrote:
6.7-stable review patch. If anyone has any objections, please let me know.
This patch is not nice and should wait for its fixup IMO: https://lore.kernel.org/all/20240226074820.29250-1-rdunlap@infradead.org/
It makes PHYLIB=y even when not needed to be actually built in.
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit a9f80df4f51440303d063b55bb98720857693821 ]
This driver uses functions that are supplied by the Kconfig symbol PHYLIB, so select it to ensure that they are built as needed.
thanks,
On Wed, Feb 28, 2024 at 09:06:20AM +0100, Jiri Slaby wrote:
On 27. 02. 24, 14:21, Greg Kroah-Hartman wrote:
6.7-stable review patch. If anyone has any objections, please let me know.
This patch is not nice and should wait for its fixup IMO: https://lore.kernel.org/all/20240226074820.29250-1-rdunlap@infradead.org/
It makes PHYLIB=y even when not needed to be actually built in.
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit a9f80df4f51440303d063b55bb98720857693821 ]
This driver uses functions that are supplied by the Kconfig symbol PHYLIB, so select it to ensure that they are built as needed.
Now dropped from all queues, thanks!
greg k-h
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Victor Nogueira victor@mojatatu.com
[ Upstream commit 16085e48cb48aeb50a1178dc276747749910b0f2 ]
As a preparation for adding block ID to mirred, separate the part of mirred that redirect/mirrors to a dev into a specific function so that it can be called by blockcast for each dev.
Also improve readability. Eg. rename use_reinsert to dont_clone and skb2 to skb_to_send.
Co-developed-by: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: Jamal Hadi Salim jhs@mojatatu.com Co-developed-by: Pedro Tammela pctammela@mojatatu.com Signed-off-by: Pedro Tammela pctammela@mojatatu.com Signed-off-by: Victor Nogueira victor@mojatatu.com Signed-off-by: David S. Miller davem@davemloft.net Stable-dep-of: 52f671db1882 ("net/sched: act_mirred: use the backlog for mirred ingress") Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/act_mirred.c | 129 +++++++++++++++++++++++------------------ 1 file changed, 72 insertions(+), 57 deletions(-)
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 0a711c184c29b..6f2544c1e3961 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -225,48 +225,26 @@ static int tcf_mirred_forward(bool want_ingress, struct sk_buff *skb) return err; }
-TC_INDIRECT_SCOPE int tcf_mirred_act(struct sk_buff *skb, - const struct tc_action *a, - struct tcf_result *res) +static int tcf_mirred_to_dev(struct sk_buff *skb, struct tcf_mirred *m, + struct net_device *dev, + const bool m_mac_header_xmit, int m_eaction, + int retval) { - struct tcf_mirred *m = to_mirred(a); - struct sk_buff *skb2 = skb; - bool m_mac_header_xmit; - struct net_device *dev; - unsigned int nest_level; - int retval, err = 0; - bool use_reinsert; + struct sk_buff *skb_to_send = skb; bool want_ingress; bool is_redirect; bool expects_nh; bool at_ingress; - int m_eaction; + bool dont_clone; int mac_len; bool at_nh; + int err;
- nest_level = __this_cpu_inc_return(mirred_nest_level); - if (unlikely(nest_level > MIRRED_NEST_LIMIT)) { - net_warn_ratelimited("Packet exceeded mirred recursion limit on dev %s\n", - netdev_name(skb->dev)); - __this_cpu_dec(mirred_nest_level); - return TC_ACT_SHOT; - } - - tcf_lastuse_update(&m->tcf_tm); - tcf_action_update_bstats(&m->common, skb); - - m_mac_header_xmit = READ_ONCE(m->tcfm_mac_header_xmit); - m_eaction = READ_ONCE(m->tcfm_eaction); - retval = READ_ONCE(m->tcf_action); - dev = rcu_dereference_bh(m->tcfm_dev); - if (unlikely(!dev)) { - pr_notice_once("tc mirred: target device is gone\n"); - goto out; - } - + is_redirect = tcf_mirred_is_act_redirect(m_eaction); if (unlikely(!(dev->flags & IFF_UP)) || !netif_carrier_ok(dev)) { net_notice_ratelimited("tc mirred to Houston: device %s is down\n", dev->name); + err = -ENODEV; goto out; }
@@ -274,61 +252,98 @@ TC_INDIRECT_SCOPE int tcf_mirred_act(struct sk_buff *skb, * since we can't easily detect the clsact caller, skip clone only for * ingress - that covers the TC S/W datapath. */ - is_redirect = tcf_mirred_is_act_redirect(m_eaction); at_ingress = skb_at_tc_ingress(skb); - use_reinsert = at_ingress && is_redirect && - tcf_mirred_can_reinsert(retval); - if (!use_reinsert) { - skb2 = skb_clone(skb, GFP_ATOMIC); - if (!skb2) + dont_clone = skb_at_tc_ingress(skb) && is_redirect && + tcf_mirred_can_reinsert(retval); + if (!dont_clone) { + skb_to_send = skb_clone(skb, GFP_ATOMIC); + if (!skb_to_send) { + err = -ENOMEM; goto out; + } }
want_ingress = tcf_mirred_act_wants_ingress(m_eaction);
/* All mirred/redirected skbs should clear previous ct info */ - nf_reset_ct(skb2); + nf_reset_ct(skb_to_send); if (want_ingress && !at_ingress) /* drop dst for egress -> ingress */ - skb_dst_drop(skb2); + skb_dst_drop(skb_to_send);
expects_nh = want_ingress || !m_mac_header_xmit; at_nh = skb->data == skb_network_header(skb); if (at_nh != expects_nh) { - mac_len = skb_at_tc_ingress(skb) ? skb->mac_len : + mac_len = at_ingress ? skb->mac_len : skb_network_offset(skb); if (expects_nh) { /* target device/action expect data at nh */ - skb_pull_rcsum(skb2, mac_len); + skb_pull_rcsum(skb_to_send, mac_len); } else { /* target device/action expect data at mac */ - skb_push_rcsum(skb2, mac_len); + skb_push_rcsum(skb_to_send, mac_len); } }
- skb2->skb_iif = skb->dev->ifindex; - skb2->dev = dev; + skb_to_send->skb_iif = skb->dev->ifindex; + skb_to_send->dev = dev;
- /* mirror is always swallowed */ if (is_redirect) { - skb_set_redirected(skb2, skb2->tc_at_ingress); - - /* let's the caller reinsert the packet, if possible */ - if (use_reinsert) { - err = tcf_mirred_forward(want_ingress, skb); - if (err) - tcf_action_inc_overlimit_qstats(&m->common); - __this_cpu_dec(mirred_nest_level); - return TC_ACT_CONSUMED; - } + if (skb == skb_to_send) + retval = TC_ACT_CONSUMED; + + skb_set_redirected(skb_to_send, skb_to_send->tc_at_ingress); + + err = tcf_mirred_forward(want_ingress, skb_to_send); + } else { + err = tcf_mirred_forward(want_ingress, skb_to_send); }
- err = tcf_mirred_forward(want_ingress, skb2); if (err) { out: tcf_action_inc_overlimit_qstats(&m->common); - if (tcf_mirred_is_act_redirect(m_eaction)) + if (is_redirect) retval = TC_ACT_SHOT; } + + return retval; +} + +TC_INDIRECT_SCOPE int tcf_mirred_act(struct sk_buff *skb, + const struct tc_action *a, + struct tcf_result *res) +{ + struct tcf_mirred *m = to_mirred(a); + int retval = READ_ONCE(m->tcf_action); + unsigned int nest_level; + bool m_mac_header_xmit; + struct net_device *dev; + int m_eaction; + + nest_level = __this_cpu_inc_return(mirred_nest_level); + if (unlikely(nest_level > MIRRED_NEST_LIMIT)) { + net_warn_ratelimited("Packet exceeded mirred recursion limit on dev %s\n", + netdev_name(skb->dev)); + retval = TC_ACT_SHOT; + goto dec_nest_level; + } + + tcf_lastuse_update(&m->tcf_tm); + tcf_action_update_bstats(&m->common, skb); + + dev = rcu_dereference_bh(m->tcfm_dev); + if (unlikely(!dev)) { + pr_notice_once("tc mirred: target device is gone\n"); + tcf_action_inc_overlimit_qstats(&m->common); + goto dec_nest_level; + } + + m_mac_header_xmit = READ_ONCE(m->tcfm_mac_header_xmit); + m_eaction = READ_ONCE(m->tcfm_eaction); + + retval = tcf_mirred_to_dev(skb, m, dev, m_mac_header_xmit, m_eaction, + retval); + +dec_nest_level: __this_cpu_dec(mirred_nest_level);
return retval;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski kuba@kernel.org
[ Upstream commit 52f671db18823089a02f07efc04efdb2272ddc17 ]
The test Davide added in commit ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep.
The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls.
In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue.
Fixes: 53592b364001 ("net/sched: act_mirred: Implement ingress actions") Cc: Marcelo Ricardo Leitner marcelo.leitner@gmail.com Suggested-by: Davide Caratti dcaratti@redhat.com Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663... Signed-off-by: Jakub Kicinski kuba@kernel.org Acked-by: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/act_mirred.c | 14 +++++--------- .../testing/selftests/net/forwarding/tc_actions.sh | 3 --- 2 files changed, 5 insertions(+), 12 deletions(-)
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 6f2544c1e3961..bab090bb5e80a 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -206,18 +206,14 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla, return err; }
-static bool is_mirred_nested(void) -{ - return unlikely(__this_cpu_read(mirred_nest_level) > 1); -} - -static int tcf_mirred_forward(bool want_ingress, struct sk_buff *skb) +static int +tcf_mirred_forward(bool at_ingress, bool want_ingress, struct sk_buff *skb) { int err;
if (!want_ingress) err = tcf_dev_queue_xmit(skb, dev_queue_xmit); - else if (is_mirred_nested()) + else if (!at_ingress) err = netif_rx(skb); else err = netif_receive_skb(skb); @@ -293,9 +289,9 @@ static int tcf_mirred_to_dev(struct sk_buff *skb, struct tcf_mirred *m,
skb_set_redirected(skb_to_send, skb_to_send->tc_at_ingress);
- err = tcf_mirred_forward(want_ingress, skb_to_send); + err = tcf_mirred_forward(at_ingress, want_ingress, skb_to_send); } else { - err = tcf_mirred_forward(want_ingress, skb_to_send); + err = tcf_mirred_forward(at_ingress, want_ingress, skb_to_send); }
if (err) { diff --git a/tools/testing/selftests/net/forwarding/tc_actions.sh b/tools/testing/selftests/net/forwarding/tc_actions.sh index b0f5e55d2d0b2..5896296365022 100755 --- a/tools/testing/selftests/net/forwarding/tc_actions.sh +++ b/tools/testing/selftests/net/forwarding/tc_actions.sh @@ -235,9 +235,6 @@ mirred_egress_to_ingress_tcp_test() check_err $? "didn't mirred redirect ICMP" tc_check_packets "dev $h1 ingress" 102 10 check_err $? "didn't drop mirred ICMP" - local overlimits=$(tc_rule_stats_get ${h1} 101 egress .overlimits) - test ${overlimits} = 10 - check_err $? "wrong overlimits, expected 10 got ${overlimits}"
tc filter del dev $h1 egress protocol ip pref 100 handle 100 flower tc filter del dev $h1 egress protocol ip pref 101 handle 101 flower
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski kuba@kernel.org
[ Upstream commit 166c2c8a6a4dc2e4ceba9e10cfe81c3e469e3210 ]
If we're redirecting the skb, and haven't called tcf_mirred_forward(), yet, we need to tell the core to drop the skb by setting the retcode to SHOT. If we have called tcf_mirred_forward(), however, the skb is out of our hands and returning SHOT will lead to UaF.
Move the retval override to the error path which actually need it.
Reviewed-by: Michal Swiatkowski michal.swiatkowski@linux.intel.com Fixes: e5cf1baf92cb ("act_mirred: use TC_ACT_REINSERT when possible") Signed-off-by: Jakub Kicinski kuba@kernel.org Acked-by: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/act_mirred.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index bab090bb5e80a..674f7ae356ca2 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -240,8 +240,7 @@ static int tcf_mirred_to_dev(struct sk_buff *skb, struct tcf_mirred *m, if (unlikely(!(dev->flags & IFF_UP)) || !netif_carrier_ok(dev)) { net_notice_ratelimited("tc mirred to Houston: device %s is down\n", dev->name); - err = -ENODEV; - goto out; + goto err_cant_do; }
/* we could easily avoid the clone only if called by ingress and clsact; @@ -253,10 +252,8 @@ static int tcf_mirred_to_dev(struct sk_buff *skb, struct tcf_mirred *m, tcf_mirred_can_reinsert(retval); if (!dont_clone) { skb_to_send = skb_clone(skb, GFP_ATOMIC); - if (!skb_to_send) { - err = -ENOMEM; - goto out; - } + if (!skb_to_send) + goto err_cant_do; }
want_ingress = tcf_mirred_act_wants_ingress(m_eaction); @@ -293,15 +290,16 @@ static int tcf_mirred_to_dev(struct sk_buff *skb, struct tcf_mirred *m, } else { err = tcf_mirred_forward(at_ingress, want_ingress, skb_to_send); } - - if (err) { -out: + if (err) tcf_action_inc_overlimit_qstats(&m->common); - if (is_redirect) - retval = TC_ACT_SHOT; - }
return retval; + +err_cant_do: + if (is_redirect) + retval = TC_ACT_SHOT; + tcf_action_inc_overlimit_qstats(&m->common); + return retval; }
TC_INDIRECT_SCOPE int tcf_mirred_act(struct sk_buff *skb,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 0affdba22aca5573f9d989bcb1d71d32a6a03efe ]
clang-16 warns about casting between incompatible function types:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 161 | .fini = (void(*)(void *))release_firmware,
This one was done to use the generic shadow_fw_release() function as a callback for struct nvbios_source. Change it to use the same prototype as the other five instances, with a trivial helper function that actually calls release_firmware.
Fixes: 70c0f263cc2e ("drm/nouveau/bios: pull in basic vbios subdev, more to come later") Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Danilo Krummrich dakr@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/20240213095753.455062-1-arnd@k... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c index 19188683c8fca..8c2bf1c16f2a9 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c @@ -154,11 +154,17 @@ shadow_fw_init(struct nvkm_bios *bios, const char *name) return (void *)fw; }
+static void +shadow_fw_release(void *fw) +{ + release_firmware(fw); +} + static const struct nvbios_source shadow_fw = { .name = "firmware", .init = shadow_fw_init, - .fini = (void(*)(void *))release_firmware, + .fini = shadow_fw_release, .read = shadow_fw_read, .rw = false, };
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Carpenter dan.carpenter@linaro.org
[ Upstream commit 65323796debe49a1922ba507020f7530a4b3f9af ]
If gf100_bar_new_() fails then "bar" is not initialized.
Fixes: 5bf0257136a2 ("drm/nouveau/mmu/r535: initial support") Signed-off-by: Dan Carpenter dan.carpenter@linaro.org Signed-off-by: Danilo Krummrich dakr@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/dab21df7-4d90-4479-97d8-97e5d2... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c index 4135690326f44..3a30bea30e366 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c @@ -168,12 +168,11 @@ r535_bar_new_(const struct nvkm_bar_func *hw, struct nvkm_device *device, rm->flush = r535_bar_flush;
ret = gf100_bar_new_(rm, device, type, inst, &bar); - *pbar = bar; if (ret) { - if (!bar) - kfree(rm); + kfree(rm); return ret; } + *pbar = bar;
bar->flushBAR2PhysMode = ioremap(device->func->resource_addr(device, 3), PAGE_SIZE); if (!bar->flushBAR2PhysMode)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alison Schofield alison.schofield@intel.com
[ Upstream commit 9b99c17f7510bed2adbe17751fb8abddba5620bc ]
numa_fill_memblks() fills in the gaps in numa_meminfo memblks over a physical address range. To do so, it first creates a list of existing memblks that overlap that address range. The issue is that it is off by one when comparing to the end of the address range, so memblks that do not overlap are selected.
The impact of selecting a memblk that does not actually overlap is that an existing memblk may be filled when the expected action is to do nothing and return NUMA_NO_MEMBLK to the caller. The caller can then add a new NUMA node and memblk.
Replace the broken open-coded search for address overlap with the memblock helper memblock_addrs_overlap(). Update the kernel doc and in code comments.
Suggested by: "Huang, Ying" ying.huang@intel.com
Fixes: 8f012db27c95 ("x86/numa: Introduce numa_fill_memblks()") Signed-off-by: Alison Schofield alison.schofield@intel.com Acked-by: Mike Rapoport (IBM) rppt@kernel.org Acked-by: Dave Hansen dave.hansen@linux.intel.com Reviewed-by: Dan Williams dan.j.williams@intel.com Link: https://lore.kernel.org/r/10a3e6109c34c21a8dd4c513cf63df63481a2b07.170508554... Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/mm/numa.c | 19 +++++++------------ include/linux/memblock.h | 2 ++ mm/memblock.c | 5 +++-- 3 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index b29ceb19e46ec..efc5f1be8d3af 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -974,14 +974,12 @@ static struct numa_memblk *numa_memblk_list[NR_NODE_MEMBLKS] __initdata; * @start: address to begin fill * @end: address to end fill * - * Find and extend numa_meminfo memblks to cover the @start-@end - * physical address range, such that the first memblk includes - * @start, the last memblk includes @end, and any gaps in between - * are filled. + * Find and extend numa_meminfo memblks to cover the physical + * address range @start-@end * * RETURNS: * 0 : Success - * NUMA_NO_MEMBLK : No memblk exists in @start-@end range + * NUMA_NO_MEMBLK : No memblks exist in address range @start-@end */
int __init numa_fill_memblks(u64 start, u64 end) @@ -993,17 +991,14 @@ int __init numa_fill_memblks(u64 start, u64 end)
/* * Create a list of pointers to numa_meminfo memblks that - * overlap start, end. Exclude (start == bi->end) since - * end addresses in both a CFMWS range and a memblk range - * are exclusive. - * - * This list of pointers is used to make in-place changes - * that fill out the numa_meminfo memblks. + * overlap start, end. The list is used to make in-place + * changes that fill out the numa_meminfo memblks. */ for (int i = 0; i < mi->nr_blks; i++) { struct numa_memblk *bi = &mi->blk[i];
- if (start < bi->end && end >= bi->start) { + if (memblock_addrs_overlap(start, end - start, bi->start, + bi->end - bi->start)) { blk[count] = &mi->blk[i]; count++; } diff --git a/include/linux/memblock.h b/include/linux/memblock.h index ae3bde302f704..ccf0176ba3681 100644 --- a/include/linux/memblock.h +++ b/include/linux/memblock.h @@ -121,6 +121,8 @@ int memblock_reserve(phys_addr_t base, phys_addr_t size); int memblock_physmem_add(phys_addr_t base, phys_addr_t size); #endif void memblock_trim_memory(phys_addr_t align); +unsigned long memblock_addrs_overlap(phys_addr_t base1, phys_addr_t size1, + phys_addr_t base2, phys_addr_t size2); bool memblock_overlaps_region(struct memblock_type *type, phys_addr_t base, phys_addr_t size); int memblock_mark_hotplug(phys_addr_t base, phys_addr_t size); diff --git a/mm/memblock.c b/mm/memblock.c index 1572956c5e31e..9a5248fe9cf97 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -180,8 +180,9 @@ static inline phys_addr_t memblock_cap_size(phys_addr_t base, phys_addr_t *size) /* * Address comparison utilities */ -static unsigned long __init_memblock memblock_addrs_overlap(phys_addr_t base1, phys_addr_t size1, - phys_addr_t base2, phys_addr_t size2) +unsigned long __init_memblock +memblock_addrs_overlap(phys_addr_t base1, phys_addr_t size1, phys_addr_t base2, + phys_addr_t size2) { return ((base1 < (base2 + size2)) && (base2 < (base1 + size1))); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alison Schofield alison.schofield@intel.com
[ Upstream commit b626070ffc14acca5b87a2aa5f581db98617584c ]
The compare function used to sort memblks into starting address order fails when the result of its u64 address subtraction gets truncated to an int upon return.
The impact of the bad sort is that memblks will be filled out incorrectly. Depending on the set of memblks, a user may see no errors at all but still have a bad fill, or see messages reporting a node overlap that leads to numa init failure:
[] node 0 [mem: ] overlaps with node 1 [mem: ] [] No NUMA configuration found
Replace with a comparison that can only result in: 1, 0, -1.
Fixes: 8f012db27c95 ("x86/numa: Introduce numa_fill_memblks()") Signed-off-by: Alison Schofield alison.schofield@intel.com Acked-by: Dave Hansen dave.hansen@linux.intel.com Reviewed-by: Dan Williams dan.j.williams@intel.com Link: https://lore.kernel.org/r/99dcb3ae87e04995e9f293f6158dc8fa0749a487.170508554... Signed-off-by: Dan Williams dan.j.williams@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/mm/numa.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index efc5f1be8d3af..9d63cfff1fd41 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -964,7 +964,7 @@ static int __init cmp_memblk(const void *a, const void *b) const struct numa_memblk *ma = *(const struct numa_memblk **)a; const struct numa_memblk *mb = *(const struct numa_memblk **)b;
- return ma->start - mb->start; + return (ma->start > mb->start) - (ma->start < mb->start); }
static struct numa_memblk *numa_memblk_list[NR_NODE_MEMBLKS] __initdata;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pavel Sakharov p.sakharov@ispras.ru
[ Upstream commit 97dde84026339e4b4af9a6301f825d1828d7874b ]
If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address when dereferencing calling netdev_err().
Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument to request_irq() during interrupt initialization (that is, the net_device and rx/tx queue pointers initialized at the time of the call) and since there are usually no checks for the 'dev_id' argument in such handlers in other drivers, remove these checks from the handlers in stmmac driver.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8532f613bc78 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX") Signed-off-by: Pavel Sakharov p.sakharov@ispras.ru Reviewed-by: Serge Semin fancer.lancer@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 20 ------------------- 1 file changed, 20 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index ec34768e054da..e9a1b60ebb503 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -5977,11 +5977,6 @@ static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id) struct net_device *dev = (struct net_device *)dev_id; struct stmmac_priv *priv = netdev_priv(dev);
- if (unlikely(!dev)) { - netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__); - return IRQ_NONE; - } - /* Check if adapter is up */ if (test_bit(STMMAC_DOWN, &priv->state)) return IRQ_HANDLED; @@ -5997,11 +5992,6 @@ static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id) struct net_device *dev = (struct net_device *)dev_id; struct stmmac_priv *priv = netdev_priv(dev);
- if (unlikely(!dev)) { - netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__); - return IRQ_NONE; - } - /* Check if adapter is up */ if (test_bit(STMMAC_DOWN, &priv->state)) return IRQ_HANDLED; @@ -6023,11 +6013,6 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data) dma_conf = container_of(tx_q, struct stmmac_dma_conf, tx_queue[chan]); priv = container_of(dma_conf, struct stmmac_priv, dma_conf);
- if (unlikely(!data)) { - netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__); - return IRQ_NONE; - } - /* Check if adapter is up */ if (test_bit(STMMAC_DOWN, &priv->state)) return IRQ_HANDLED; @@ -6054,11 +6039,6 @@ static irqreturn_t stmmac_msi_intr_rx(int irq, void *data) dma_conf = container_of(rx_q, struct stmmac_dma_conf, rx_queue[chan]); priv = container_of(dma_conf, struct stmmac_priv, dma_conf);
- if (unlikely(!data)) { - netdev_err(priv->dev, "%s: invalid dev pointer\n", __func__); - return IRQ_NONE; - } - /* Check if adapter is up */ if (test_bit(STMMAC_DOWN, &priv->state)) return IRQ_HANDLED;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit 081a0e3b0d4c061419d3f4679dec9f68725b17e4 ]
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values were changed with the same amount.
Fixes: 0465277f6b3f ("ipv4: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Nicolas Dichtel nicolas.dichtel@6wind.com Acked-by: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/devinet.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index ca0ff15dc8fa3..bc74f131fe4df 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1825,6 +1825,21 @@ static int in_dev_dump_addr(struct in_device *in_dev, struct sk_buff *skb, return err; }
+/* Combine dev_addr_genid and dev_base_seq to detect changes. + */ +static u32 inet_base_seq(const struct net *net) +{ + u32 res = atomic_read(&net->ipv4.dev_addr_genid) + + net->dev_base_seq; + + /* Must not return 0 (see nl_dump_check_consistent()). + * Chose a value far away from 0. + */ + if (!res) + res = 0x80000000; + return res; +} + static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) { const struct nlmsghdr *nlh = cb->nlh; @@ -1876,8 +1891,7 @@ static int inet_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) idx = 0; head = &tgt_net->dev_index_head[h]; rcu_read_lock(); - cb->seq = atomic_read(&tgt_net->ipv4.dev_addr_genid) ^ - tgt_net->dev_base_seq; + cb->seq = inet_base_seq(tgt_net); hlist_for_each_entry_rcu(dev, head, index_hlist) { if (idx < s_idx) goto cont; @@ -2278,8 +2292,7 @@ static int inet_netconf_dump_devconf(struct sk_buff *skb, idx = 0; head = &net->dev_index_head[h]; rcu_read_lock(); - cb->seq = atomic_read(&net->ipv4.dev_addr_genid) ^ - net->dev_base_seq; + cb->seq = inet_base_seq(net); hlist_for_each_entry_rcu(dev, head, index_hlist) { if (idx < s_idx) goto cont;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit e898e4cd1aab271ca414f9ac6e08e4c761f6913c ]
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values were changed with the same amount.
Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Nicolas Dichtel nicolas.dichtel@6wind.com
Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/addrconf.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 733ace18806c6..5a839c5fb1a5a 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -708,6 +708,22 @@ static int inet6_netconf_get_devconf(struct sk_buff *in_skb, return err; }
+/* Combine dev_addr_genid and dev_base_seq to detect changes. + */ +static u32 inet6_base_seq(const struct net *net) +{ + u32 res = atomic_read(&net->ipv6.dev_addr_genid) + + net->dev_base_seq; + + /* Must not return 0 (see nl_dump_check_consistent()). + * Chose a value far away from 0. + */ + if (!res) + res = 0x80000000; + return res; +} + + static int inet6_netconf_dump_devconf(struct sk_buff *skb, struct netlink_callback *cb) { @@ -741,8 +757,7 @@ static int inet6_netconf_dump_devconf(struct sk_buff *skb, idx = 0; head = &net->dev_index_head[h]; rcu_read_lock(); - cb->seq = atomic_read(&net->ipv6.dev_addr_genid) ^ - net->dev_base_seq; + cb->seq = inet6_base_seq(net); hlist_for_each_entry_rcu(dev, head, index_hlist) { if (idx < s_idx) goto cont; @@ -5362,7 +5377,7 @@ static int inet6_dump_addr(struct sk_buff *skb, struct netlink_callback *cb, }
rcu_read_lock(); - cb->seq = atomic_read(&tgt_net->ipv6.dev_addr_genid) ^ tgt_net->dev_base_seq; + cb->seq = inet6_base_seq(tgt_net); for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) { idx = 0; head = &tgt_net->dev_index_head[h];
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli florian.fainelli@broadcom.com
[ Upstream commit 5b76d928f8b779a1b19c5842e7cabee4cbb610c3 ]
Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The ASP driver essentially does exactly what mdio_bus_phy_resume() does.
Fixes: 490cb412007d ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by: Florian Fainelli florian.fainelli@broadcom.com Signed-off-by: Justin Chen justin.chen@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c index 53e5428812552..9cae5a3090000 100644 --- a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c +++ b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c @@ -1048,6 +1048,9 @@ static int bcmasp_netif_init(struct net_device *dev, bool phy_connect) netdev_err(dev, "could not attach to PHY\n"); goto err_phy_disable; } + + /* Indicate that the MAC is responsible for PHY PM */ + phydev->mac_managed_pm = true; } else if (!intf->wolopts) { ret = phy_resume(dev->phydev); if (ret)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Justin Chen justin.chen@broadcom.com
[ Upstream commit f120e62e37f0af4c4cbe08e5a88ea60a6a17c858 ]
A sanity check for OOB write is off by one leading to a false positive when the array is full.
Fixes: 9b90aca97f6d ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()") Signed-off-by: Justin Chen justin.chen@broadcom.com Reviewed-by: Florian Fainelli florian.fainelli@broadcom.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/asp2/bcmasp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp.c b/drivers/net/ethernet/broadcom/asp2/bcmasp.c index 29b04a274d077..80245c65cc904 100644 --- a/drivers/net/ethernet/broadcom/asp2/bcmasp.c +++ b/drivers/net/ethernet/broadcom/asp2/bcmasp.c @@ -535,9 +535,6 @@ int bcmasp_netfilt_get_all_active(struct bcmasp_intf *intf, u32 *rule_locs, int j = 0, i;
for (i = 0; i < NUM_NET_FILTERS; i++) { - if (j == *rule_cnt) - return -EMSGSIZE; - if (!priv->net_filters[i].claimed || priv->net_filters[i].port != intf->port) continue; @@ -547,6 +544,9 @@ int bcmasp_netfilt_get_all_active(struct bcmasp_intf *intf, u32 *rule_locs, priv->net_filters[i - 1].wake_filter) continue;
+ if (j == *rule_cnt) + return -EMSGSIZE; + rule_locs[j++] = priv->net_filters[i].fs.location; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gaurav Batra gbatra@linux.ibm.com
[ Upstream commit a5c57fd2e9bd1c8ea8613a8f94fd0be5eccbf321 ]
When a PCI device is dynamically added, the kernel oopses with a NULL pointer dereference:
BUG: Kernel NULL pointer dereference on read at 0x00000030 Faulting instruction address: 0xc0000000006bbe5c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66 Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries NIP: c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8 REGS: c00000009924f240 TRAP: 0300 Not tainted (6.7.0-203405+) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002220 XER: 20040006 CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0 ... NIP sysfs_add_link_to_group+0x34/0x94 LR iommu_device_link+0x5c/0x118 Call Trace: iommu_init_device+0x26c/0x318 (unreliable) iommu_device_link+0x5c/0x118 iommu_init_device+0xa8/0x318 iommu_probe_device+0xc0/0x134 iommu_bus_notifier+0x44/0x104 notifier_call_chain+0xb8/0x19c blocking_notifier_call_chain+0x64/0x98 bus_notify+0x50/0x7c device_add+0x640/0x918 pci_device_add+0x23c/0x298 of_create_pci_dev+0x400/0x884 of_scan_pci_dev+0x124/0x1b0 __of_scan_bus+0x78/0x18c pcibios_scan_phb+0x2a4/0x3b0 init_phb_dynamic+0xb8/0x110 dlpar_add_slot+0x170/0x3b8 [rpadlpar_io] add_slot_store.part.0+0xb4/0x130 [rpadlpar_io] kobj_attr_store+0x2c/0x48 sysfs_kf_write+0x64/0x78 kernfs_fop_write_iter+0x1b0/0x290 vfs_write+0x350/0x4a0 ksys_write+0x84/0x140 system_call_exception+0x124/0x330 system_call_vectored_common+0x15c/0x2ec
Commit a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") broke DLPAR add of PCI devices.
The above added iommu_device structure to pci_controller. During system boot, PCI devices are discovered and this newly added iommu_device structure is initialized by a call to iommu_device_register().
During DLPAR add of a PCI device, a new pci_controller structure is allocated but there are no calls made to iommu_device_register() interface.
Fix is to register the iommu device during DLPAR add as well.
Fixes: a940904443e4 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains") Signed-off-by: Gaurav Batra gbatra@linux.ibm.com Reviewed-by: Brian King brking@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20240215221833.4817-1-gbatra@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/include/asm/ppc-pci.h | 10 ++++++++++ arch/powerpc/kernel/iommu.c | 23 ++++++++++++++++------ arch/powerpc/platforms/pseries/pci_dlpar.c | 4 ++++ 3 files changed, 31 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index d9fcff5750271..2689e7139b9ea 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -30,6 +30,16 @@ void *pci_traverse_device_nodes(struct device_node *start, void *data); extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+#if defined(CONFIG_IOMMU_API) && (defined(CONFIG_PPC_PSERIES) || \ + defined(CONFIG_PPC_POWERNV)) +extern void ppc_iommu_register_device(struct pci_controller *phb); +extern void ppc_iommu_unregister_device(struct pci_controller *phb); +#else +static inline void ppc_iommu_register_device(struct pci_controller *phb) { } +static inline void ppc_iommu_unregister_device(struct pci_controller *phb) { } +#endif + + /* From rtas_pci.h */ extern void init_pci_config_tokens (void); extern unsigned long get_phb_buid (struct device_node *); diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index df17b33b89d13..2c0173e7094da 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -1341,7 +1341,7 @@ static struct iommu_device *spapr_tce_iommu_probe_device(struct device *dev) struct pci_controller *hose;
if (!dev_is_pci(dev)) - return ERR_PTR(-EPERM); + return ERR_PTR(-ENODEV);
pdev = to_pci_dev(dev); hose = pdev->bus->sysdata; @@ -1390,6 +1390,21 @@ static const struct attribute_group *spapr_tce_iommu_groups[] = { NULL, };
+void ppc_iommu_register_device(struct pci_controller *phb) +{ + iommu_device_sysfs_add(&phb->iommu, phb->parent, + spapr_tce_iommu_groups, "iommu-phb%04x", + phb->global_number); + iommu_device_register(&phb->iommu, &spapr_tce_iommu_ops, + phb->parent); +} + +void ppc_iommu_unregister_device(struct pci_controller *phb) +{ + iommu_device_unregister(&phb->iommu); + iommu_device_sysfs_remove(&phb->iommu); +} + /* * This registers IOMMU devices of PHBs. This needs to happen * after core_initcall(iommu_init) + postcore_initcall(pci_driver_init) and @@ -1400,11 +1415,7 @@ static int __init spapr_tce_setup_phb_iommus_initcall(void) struct pci_controller *hose;
list_for_each_entry(hose, &hose_list, list_node) { - iommu_device_sysfs_add(&hose->iommu, hose->parent, - spapr_tce_iommu_groups, "iommu-phb%04x", - hose->global_number); - iommu_device_register(&hose->iommu, &spapr_tce_iommu_ops, - hose->parent); + ppc_iommu_register_device(hose); } return 0; } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 4ba8245681192..4448386268d99 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -35,6 +35,8 @@ struct pci_controller *init_phb_dynamic(struct device_node *dn)
pseries_msi_allocate_domains(phb);
+ ppc_iommu_register_device(phb); + /* Create EEH devices for the PHB */ eeh_phb_pe_create(phb);
@@ -76,6 +78,8 @@ int remove_phb_dynamic(struct pci_controller *phb) } }
+ ppc_iommu_unregister_device(phb); + pseries_msi_free_domains(phb);
/* Keep a reference so phb isn't freed yet */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu liuhangbin@gmail.com
[ Upstream commit cd65c48d66920457129584553f217005d09b1edb ]
In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1].
[ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1
Fix it by setting active slave to primary slave specifically before testing.
[1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-opt...
Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Signed-off-by: Hangbin Liu liuhangbin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/drivers/net/bonding/bond_options.sh | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh index d508486cc0bdc..9a3d3c389dadd 100755 --- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -62,6 +62,8 @@ prio_test()
# create bond bond_reset "${param}" + # set active_slave to primary eth1 specifically + ip -n ${s_ns} link set bond0 type bond active_slave eth1
# check bonding member prio value ip -n ${s_ns} link set eth0 type bond_slave prio 0
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Radhey Shyam Pandey radhey.shyam.pandey@amd.com
[ Upstream commit 26c8404e162b43dddcb037ba2d0cb58c0ed60aab ]
Platform clock and phy error resources are not cleaned up in Xilinx GT PHY error path.
To fix introduce the function ceva_ahci_platform_enable_resources() which is a customized version of ahci_platform_enable_resources() and inline with SATA IP programming sequence it does:
- Assert SATA reset - Program PS GTR phy - Bring SATA by de-asserting the reset - Wait for GT lane PLL to be locked
ceva_ahci_platform_enable_resources() is also used in the resume path as the same SATA programming sequence (as in probe) should be followed. Also cleanup the mixed usage of ahci_platform_enable_resources() and custom implementation in the probe function as both are not required.
Fixes: 9a9d3abe24bb ("ata: ahci: ceva: Update the driver to support xilinx GT phy") Signed-off-by: Radhey Shyam Pandey radhey.shyam.pandey@amd.com Reviewed-by: Damien Le Moal dlemoal@kernel.org Signed-off-by: Niklas Cassel cassel@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/ahci_ceva.c | 125 +++++++++++++++++++++++++--------------- 1 file changed, 79 insertions(+), 46 deletions(-)
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c index 64f7f7d6ba84e..11a2c199a7c24 100644 --- a/drivers/ata/ahci_ceva.c +++ b/drivers/ata/ahci_ceva.c @@ -88,7 +88,6 @@ struct ceva_ahci_priv { u32 axicc; bool is_cci_enabled; int flags; - struct reset_control *rst; };
static unsigned int ceva_ahci_read_id(struct ata_device *dev, @@ -189,6 +188,60 @@ static const struct scsi_host_template ahci_platform_sht = { AHCI_SHT(DRV_NAME), };
+static int ceva_ahci_platform_enable_resources(struct ahci_host_priv *hpriv) +{ + int rc, i; + + rc = ahci_platform_enable_regulators(hpriv); + if (rc) + return rc; + + rc = ahci_platform_enable_clks(hpriv); + if (rc) + goto disable_regulator; + + /* Assert the controller reset */ + rc = ahci_platform_assert_rsts(hpriv); + if (rc) + goto disable_clks; + + for (i = 0; i < hpriv->nports; i++) { + rc = phy_init(hpriv->phys[i]); + if (rc) + goto disable_rsts; + } + + /* De-assert the controller reset */ + ahci_platform_deassert_rsts(hpriv); + + for (i = 0; i < hpriv->nports; i++) { + rc = phy_power_on(hpriv->phys[i]); + if (rc) { + phy_exit(hpriv->phys[i]); + goto disable_phys; + } + } + + return 0; + +disable_rsts: + ahci_platform_deassert_rsts(hpriv); + +disable_phys: + while (--i >= 0) { + phy_power_off(hpriv->phys[i]); + phy_exit(hpriv->phys[i]); + } + +disable_clks: + ahci_platform_disable_clks(hpriv); + +disable_regulator: + ahci_platform_disable_regulators(hpriv); + + return rc; +} + static int ceva_ahci_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -203,47 +256,19 @@ static int ceva_ahci_probe(struct platform_device *pdev) return -ENOMEM;
cevapriv->ahci_pdev = pdev; - - cevapriv->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, - NULL); - if (IS_ERR(cevapriv->rst)) - dev_err_probe(&pdev->dev, PTR_ERR(cevapriv->rst), - "failed to get reset\n"); - hpriv = ahci_platform_get_resources(pdev, 0); if (IS_ERR(hpriv)) return PTR_ERR(hpriv);
- if (!cevapriv->rst) { - rc = ahci_platform_enable_resources(hpriv); - if (rc) - return rc; - } else { - int i; + hpriv->rsts = devm_reset_control_get_optional_exclusive(&pdev->dev, + NULL); + if (IS_ERR(hpriv->rsts)) + return dev_err_probe(&pdev->dev, PTR_ERR(hpriv->rsts), + "failed to get reset\n");
- rc = ahci_platform_enable_clks(hpriv); - if (rc) - return rc; - /* Assert the controller reset */ - reset_control_assert(cevapriv->rst); - - for (i = 0; i < hpriv->nports; i++) { - rc = phy_init(hpriv->phys[i]); - if (rc) - return rc; - } - - /* De-assert the controller reset */ - reset_control_deassert(cevapriv->rst); - - for (i = 0; i < hpriv->nports; i++) { - rc = phy_power_on(hpriv->phys[i]); - if (rc) { - phy_exit(hpriv->phys[i]); - return rc; - } - } - } + rc = ceva_ahci_platform_enable_resources(hpriv); + if (rc) + return rc;
if (of_property_read_bool(np, "ceva,broken-gen2")) cevapriv->flags = CEVA_FLAG_BROKEN_GEN2; @@ -252,52 +277,60 @@ static int ceva_ahci_probe(struct platform_device *pdev) if (of_property_read_u8_array(np, "ceva,p0-cominit-params", (u8 *)&cevapriv->pp2c[0], 4) < 0) { dev_warn(dev, "ceva,p0-cominit-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
if (of_property_read_u8_array(np, "ceva,p1-cominit-params", (u8 *)&cevapriv->pp2c[1], 4) < 0) { dev_warn(dev, "ceva,p1-cominit-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
/* Read OOB timing value for COMWAKE from device-tree*/ if (of_property_read_u8_array(np, "ceva,p0-comwake-params", (u8 *)&cevapriv->pp3c[0], 4) < 0) { dev_warn(dev, "ceva,p0-comwake-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
if (of_property_read_u8_array(np, "ceva,p1-comwake-params", (u8 *)&cevapriv->pp3c[1], 4) < 0) { dev_warn(dev, "ceva,p1-comwake-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
/* Read phy BURST timing value from device-tree */ if (of_property_read_u8_array(np, "ceva,p0-burst-params", (u8 *)&cevapriv->pp4c[0], 4) < 0) { dev_warn(dev, "ceva,p0-burst-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
if (of_property_read_u8_array(np, "ceva,p1-burst-params", (u8 *)&cevapriv->pp4c[1], 4) < 0) { dev_warn(dev, "ceva,p1-burst-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
/* Read phy RETRY interval timing value from device-tree */ if (of_property_read_u16_array(np, "ceva,p0-retry-params", (u16 *)&cevapriv->pp5c[0], 2) < 0) { dev_warn(dev, "ceva,p0-retry-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
if (of_property_read_u16_array(np, "ceva,p1-retry-params", (u16 *)&cevapriv->pp5c[1], 2) < 0) { dev_warn(dev, "ceva,p1-retry-params property not defined\n"); - return -EINVAL; + rc = -EINVAL; + goto disable_resources; }
/* @@ -335,7 +368,7 @@ static int __maybe_unused ceva_ahci_resume(struct device *dev) struct ahci_host_priv *hpriv = host->private_data; int rc;
- rc = ahci_platform_enable_resources(hpriv); + rc = ceva_ahci_platform_enable_resources(hpriv); if (rc) return rc;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Martin KaFai Lau martin.lau@kernel.org
[ Upstream commit 0281b919e175bb9c3128bd3872ac2903e9436e3f ]
The following race is possible between bpf_timer_cancel_and_free and bpf_timer_cancel. It will lead a UAF on the timer->timer.
bpf_timer_cancel(); spin_lock(); t = timer->time; spin_unlock();
bpf_timer_cancel_and_free(); spin_lock(); t = timer->timer; timer->timer = NULL; spin_unlock(); hrtimer_cancel(&t->timer); kfree(t);
/* UAF on t */ hrtimer_cancel(&t->timer);
In bpf_timer_cancel_and_free, this patch frees the timer->timer after a rcu grace period. This requires a rcu_head addition to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init, this does not need a kfree_rcu because it is still under the spin_lock and timer->timer has not been visible by others yet.
In bpf_timer_cancel, rcu_read_lock() is added because this helper can be used in a non rcu critical section context (e.g. from a sleepable bpf prog). Other timer->timer usages in helpers.c have been audited, bpf_timer_cancel() is the only place where timer->timer is used outside of the spin_lock.
Another solution considered is to mark a t->flag in bpf_timer_cancel and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free, it busy waits for the flag to be cleared before kfree(t). This patch goes with a straight forward solution and frees timer->timer after a rcu grace period.
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Suggested-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Martin KaFai Lau martin.lau@kernel.org Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Hou Tao houtao1@huawei.com Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/helpers.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c index b3053af6427d2..ce4729ef1ad2d 100644 --- a/kernel/bpf/helpers.c +++ b/kernel/bpf/helpers.c @@ -1101,6 +1101,7 @@ struct bpf_hrtimer { struct bpf_prog *prog; void __rcu *callback_fn; void *value; + struct rcu_head rcu; };
/* the actual struct hidden inside uapi struct bpf_timer */ @@ -1332,6 +1333,7 @@ BPF_CALL_1(bpf_timer_cancel, struct bpf_timer_kern *, timer)
if (in_nmi()) return -EOPNOTSUPP; + rcu_read_lock(); __bpf_spin_lock_irqsave(&timer->lock); t = timer->timer; if (!t) { @@ -1353,6 +1355,7 @@ BPF_CALL_1(bpf_timer_cancel, struct bpf_timer_kern *, timer) * if it was running. */ ret = ret ?: hrtimer_cancel(&t->timer); + rcu_read_unlock(); return ret; }
@@ -1407,7 +1410,7 @@ void bpf_timer_cancel_and_free(void *val) */ if (this_cpu_read(hrtimer_running) != t) hrtimer_cancel(&t->timer); - kfree(t); + kfree_rcu(t, rcu); }
BPF_CALL_2(bpf_kptr_xchg, void *, map_value, void *, ptr)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Pearson mpearson-lenovo@squebb.ca
[ Upstream commit 6f7d0f5fd8e440c3446560100ac4ff9a55eec340 ]
The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled).
Tested on some Thinkpads to confirm they are OK with this order too.
Signed-off-by: Mark Pearson mpearson-lenovo@squebb.ca Fixes: 640a5fa50a42 ("platform/x86: think-lmi: Opcode support") Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20240209152359.528919-1-mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/think-lmi.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c index 3a396b763c496..ce3e08815a8e6 100644 --- a/drivers/platform/x86/think-lmi.c +++ b/drivers/platform/x86/think-lmi.c @@ -1009,7 +1009,16 @@ static ssize_t current_value_store(struct kobject *kobj, * Note - this sets the variable and then the password as separate * WMI calls. Function tlmi_save_bios_settings will error if the * password is incorrect. + * Workstation's require the opcode to be set before changing the + * attribute. */ + if (tlmi_priv.pwd_admin->valid && tlmi_priv.pwd_admin->password[0]) { + ret = tlmi_opcode_setting("WmiOpcodePasswordAdmin", + tlmi_priv.pwd_admin->password); + if (ret) + goto out; + } + set_str = kasprintf(GFP_KERNEL, "%s,%s;", setting->display_name, new_setting); if (!set_str) { @@ -1021,17 +1030,10 @@ static ssize_t current_value_store(struct kobject *kobj, if (ret) goto out;
- if (tlmi_priv.save_mode == TLMI_SAVE_BULK) { + if (tlmi_priv.save_mode == TLMI_SAVE_BULK) tlmi_priv.save_required = true; - } else { - if (tlmi_priv.pwd_admin->valid && tlmi_priv.pwd_admin->password[0]) { - ret = tlmi_opcode_setting("WmiOpcodePasswordAdmin", - tlmi_priv.pwd_admin->password); - if (ret) - goto out; - } + else ret = tlmi_save_bios_settings(""); - } } else { /* old non-opcode based authentication method (deprecated) */ if (tlmi_priv.pwd_admin->valid && tlmi_priv.pwd_admin->password[0]) { auth_str = kasprintf(GFP_KERNEL, "%s,%s,%s;",
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck linux@roeck-us.net
[ Upstream commit 882a2a724ee964c1ebe7268a91d5c8c8ddc796bf ]
Debugging shows a large number of unaligned access traps in the unwinder code. Code analysis reveals a number of issues with this code:
- handle_interruption is passed twice through dereference_kernel_function_descriptor() - ret_from_kernel_thread, syscall_exit, intr_return, _switch_to_ret, and _call_on_stack are passed through dereference_kernel_function_descriptor() even though they are not declared as function pointers.
To fix the problems, drop one of the calls to dereference_kernel_function_descriptor() for handle_interruption, and compare the other pointers directly.
Fixes: 6414b30b39f9 ("parisc: unwind: Avoid missing prototype warning for handle_interruption()") Fixes: 8e0ba125c2bf ("parisc/unwind: fix unwinder when CONFIG_64BIT is enabled") Cc: Helge Deller deller@gmx.de Cc: Sven Schnelle svens@stackframe.org Cc: John David Anglin dave.anglin@bell.net Cc: Charlie Jenkins charlie@rivosinc.com Cc: David Laight David.Laight@ACULAB.COM Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/parisc/kernel/unwind.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 27ae40a443b80..f7e0fee5ee55a 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -228,10 +228,8 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int #ifdef CONFIG_IRQSTACKS extern void * const _call_on_stack; #endif /* CONFIG_IRQSTACKS */ - void *ptr;
- ptr = dereference_kernel_function_descriptor(&handle_interruption); - if (pc_is_kernel_fn(pc, ptr)) { + if (pc_is_kernel_fn(pc, handle_interruption)) { struct pt_regs *regs = (struct pt_regs *)(info->sp - frame_size - PT_SZ_ALGN); dbg("Unwinding through handle_interruption()\n"); info->prev_sp = regs->gr[30]; @@ -239,13 +237,13 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int return 1; }
- if (pc_is_kernel_fn(pc, ret_from_kernel_thread) || - pc_is_kernel_fn(pc, syscall_exit)) { + if (pc == (unsigned long)&ret_from_kernel_thread || + pc == (unsigned long)&syscall_exit) { info->prev_sp = info->prev_ip = 0; return 1; }
- if (pc_is_kernel_fn(pc, intr_return)) { + if (pc == (unsigned long)&intr_return) { struct pt_regs *regs;
dbg("Found intr_return()\n"); @@ -257,14 +255,14 @@ static int unwind_special(struct unwind_frame_info *info, unsigned long pc, int }
if (pc_is_kernel_fn(pc, _switch_to) || - pc_is_kernel_fn(pc, _switch_to_ret)) { + pc == (unsigned long)&_switch_to_ret) { info->prev_sp = info->sp - CALLEE_SAVE_FRAME_SIZE; info->prev_ip = *(unsigned long *)(info->prev_sp - RP_OFFSET); return 1; }
#ifdef CONFIG_IRQSTACKS - if (pc_is_kernel_fn(pc, _call_on_stack)) { + if (pc == (unsigned long)&_call_on_stack) { info->prev_sp = *(unsigned long *)(info->sp - FRAME_SIZE - REG_SZ); info->prev_ip = *(unsigned long *)(info->sp - FRAME_SIZE - RP_OFFSET); return 1;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniil Dulov d.dulov@aladdin.ru
[ Upstream commit 6ea38e2aeb72349cad50e38899b0ba6fbcb2af3d ]
The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()]
Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Daniil Dulov d.dulov@aladdin.ru Signed-off-by: David Howells dhowells@redhat.com Link: https://lore.kernel.org/r/20240211150442.3416-1-d.dulov@aladdin.ru/ # v1 Link: https://lore.kernel.org/r/20240212083347.10742-1-d.dulov@aladdin.ru/ # v2 Link: https://lore.kernel.org/r/20240219143906.138346-3-dhowells@redhat.com Signed-off-by: Christian Brauner brauner@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/volume.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/afs/volume.c b/fs/afs/volume.c index 115c081a8e2ce..c028598a903c9 100644 --- a/fs/afs/volume.c +++ b/fs/afs/volume.c @@ -337,7 +337,7 @@ static int afs_update_volume_status(struct afs_volume *volume, struct key *key) { struct afs_server_list *new, *old, *discard; struct afs_vldb_entry *vldb; - char idbuf[16]; + char idbuf[24]; int ret, idsz;
_enter(""); @@ -345,7 +345,7 @@ static int afs_update_volume_status(struct afs_volume *volume, struct key *key) /* We look up an ID by passing it as a decimal string in the * operation's name parameter. */ - idsz = sprintf(idbuf, "%llu", volume->vid); + idsz = snprintf(idbuf, sizeof(idbuf), "%llu", volume->vid);
vldb = afs_vl_lookup_vldb(volume->cell, key, idbuf, idsz); if (IS_ERR(vldb)) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasiliy Kovalev kovalev@altlinux.org
[ Upstream commit 5559cea2d5aa3018a5f00dd2aca3427ba09b386b ]
The pernet operations structure for the subsystem must be registered before registering the generic netlink family.
Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6") Signed-off-by: Vasiliy Kovalev kovalev@altlinux.org Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/seg6.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c index 29346a6eec9ff..35508abd76f43 100644 --- a/net/ipv6/seg6.c +++ b/net/ipv6/seg6.c @@ -512,22 +512,24 @@ int __init seg6_init(void) { int err;
- err = genl_register_family(&seg6_genl_family); + err = register_pernet_subsys(&ip6_segments_ops); if (err) goto out;
- err = register_pernet_subsys(&ip6_segments_ops); + err = genl_register_family(&seg6_genl_family); if (err) - goto out_unregister_genl; + goto out_unregister_pernet;
#ifdef CONFIG_IPV6_SEG6_LWTUNNEL err = seg6_iptunnel_init(); if (err) - goto out_unregister_pernet; + goto out_unregister_genl;
err = seg6_local_init(); - if (err) - goto out_unregister_pernet; + if (err) { + seg6_iptunnel_exit(); + goto out_unregister_genl; + } #endif
#ifdef CONFIG_IPV6_SEG6_HMAC @@ -548,11 +550,11 @@ int __init seg6_init(void) #endif #endif #ifdef CONFIG_IPV6_SEG6_LWTUNNEL -out_unregister_pernet: - unregister_pernet_subsys(&ip6_segments_ops); -#endif out_unregister_genl: genl_unregister_family(&seg6_genl_family); +#endif +out_unregister_pernet: + unregister_pernet_subsys(&ip6_segments_ops); goto out; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasiliy Kovalev kovalev@altlinux.org
[ Upstream commit def689fc26b9a9622d2e2cb0c4933dd3b1c8071c ]
The pernet operations structure for the subsystem must be registered before registering the generic netlink family.
Make an unregister in case of unsuccessful registration.
Fixes: 687125b5799c ("devlink: split out core code") Signed-off-by: Vasiliy Kovalev kovalev@altlinux.org Link: https://lore.kernel.org/r/20240215203400.29976-1-kovalev@altlinux.org Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/devlink/core.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/net/devlink/core.c b/net/devlink/core.c index cbf8560c93752..bc3d265fe2d6e 100644 --- a/net/devlink/core.c +++ b/net/devlink/core.c @@ -529,14 +529,20 @@ static int __init devlink_init(void) { int err;
- err = genl_register_family(&devlink_nl_family); - if (err) - goto out; err = register_pernet_subsys(&devlink_pernet_ops); if (err) goto out; + err = genl_register_family(&devlink_nl_family); + if (err) + goto out_unreg_pernet_subsys; err = register_netdevice_notifier(&devlink_port_netdevice_nb); + if (!err) + return 0; + + genl_unregister_family(&devlink_nl_family);
+out_unreg_pernet_subsys: + unregister_pernet_subsys(&devlink_pernet_ops); out: WARN_ON(err); return err;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kuniyuki Iwashima kuniyu@amazon.com
[ Upstream commit a7d6027790acea24446ddd6632d394096c0f4667 ]
syzkaller reported an overflown write in arp_req_get(). [0]
When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data.
The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes.
In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem.
However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get().
To avoid the overflow, let's limit the max length of memcpy().
Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller.
[0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK>
Reported-by: syzkaller syzkaller@googlegroups.com Reported-by: Bjoern Doebel doebel@amazon.de Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.com Link: https://lore.kernel.org/r/20240215230516.31330-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/arp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 9456f5bb35e5d..0d0d725b46ad0 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1125,7 +1125,8 @@ static int arp_req_get(struct arpreq *r, struct net_device *dev) if (neigh) { if (!(READ_ONCE(neigh->nud_state) & NUD_NOARP)) { read_lock_bh(&neigh->lock); - memcpy(r->arp_ha.sa_data, neigh->ha, dev->addr_len); + memcpy(r->arp_ha.sa_data, neigh->ha, + min(dev->addr_len, sizeof(r->arp_ha.sa_data_min))); r->arp_flags = arp_state_to_flags(neigh); read_unlock_bh(&neigh->lock); r->arp_ha.sa_family = dev->type;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Amit Machhiwal amachhiw@linux.ibm.com
[ Upstream commit 20c8c4dafe93e82441583e93bd68c0d256d7bed4 ]
Currently, rebooting a pseries nested qemu-kvm guest (L2) results in below error as L1 qemu sends PVR value 'arch_compat' == 0 via ppc_set_compat ioctl. This triggers a condition failure in kvmppc_set_arch_compat() resulting in an EINVAL.
qemu-system-ppc64: Unable to set CPU compatibility mode in KVM: Invalid argument
Also, a value of 0 for arch_compat generally refers the default compatibility of the host. But, arch_compat, being a Guest Wide Element in nested API v2, cannot be set to 0 in GSB as PowerVM (L0) expects a non-zero value. A value of 0 triggers a kernel trap during a reboot and consequently causes it to fail:
[ 22.106360] reboot: Restarting system KVM: unknown exit, hardware reason ffffffffffffffea NIP 0000000000000100 LR 000000000000fe44 CTR 0000000000000000 XER 0000000020040092 CPU#0 MSR 0000000000001000 HID0 0000000000000000 HF 6c000000 iidx 3 didx 3 TB 00000000 00000000 DECR 0 GPR00 0000000000000000 0000000000000000 c000000002a8c300 000000007fe00000 GPR04 0000000000000000 0000000000000000 0000000000001002 8000000002803033 GPR08 000000000a000000 0000000000000000 0000000000000004 000000002fff0000 GPR12 0000000000000000 c000000002e10000 0000000105639200 0000000000000004 GPR16 0000000000000000 000000010563a090 0000000000000000 0000000000000000 GPR20 0000000105639e20 00000001056399c8 00007fffe54abab0 0000000105639288 GPR24 0000000000000000 0000000000000001 0000000000000001 0000000000000000 GPR28 0000000000000000 0000000000000000 c000000002b30840 0000000000000000 CR 00000000 [ - - - - - - - - ] RES 000@ffffffffffffffff SRR0 0000000000000000 SRR1 0000000000000000 PVR 0000000000800200 VRSAVE 0000000000000000 SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3 0000000000000000 SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000 HSRR0 0000000000000000 HSRR1 0000000000000000 CFAR 0000000000000000 LPCR 0000000000020400 PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000
kernel:trap=0xffffffea | pc=0x100 | msr=0x1000
This patch updates kvmppc_set_arch_compat() to use the host PVR value if 'compat_pvr' == 0 indicating that qemu doesn't want to enforce any specific PVR compat mode.
The relevant part of the code might need a rework if PowerVM implements a support for `arch_compat == 0` in nestedv2 API.
Fixes: 19d31c5f1157 ("KVM: PPC: Add support for nestedv2 guests") Reviewed-by: "Aneesh Kumar K.V (IBM)" aneesh.kumar@kernel.org Reviewed-by: Vaibhav Jain vaibhav@linux.ibm.com Signed-off-by: Amit Machhiwal amachhiw@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20240207054526.3720087-1-amachhiw@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kvm/book3s_hv.c | 26 ++++++++++++++++++++++++-- arch/powerpc/kvm/book3s_hv_nestedv2.c | 20 ++++++++++++++++++-- 2 files changed, 42 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 002a7573a5d44..b5c6af0bef81e 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -391,6 +391,24 @@ static void kvmppc_set_pvr_hv(struct kvm_vcpu *vcpu, u32 pvr) /* Dummy value used in computing PCR value below */ #define PCR_ARCH_31 (PCR_ARCH_300 << 1)
+static inline unsigned long map_pcr_to_cap(unsigned long pcr) +{ + unsigned long cap = 0; + + switch (pcr) { + case PCR_ARCH_300: + cap = H_GUEST_CAP_POWER9; + break; + case PCR_ARCH_31: + cap = H_GUEST_CAP_POWER10; + break; + default: + break; + } + + return cap; +} + static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat) { unsigned long host_pcr_bit = 0, guest_pcr_bit = 0, cap = 0; @@ -424,11 +442,9 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat) break; case PVR_ARCH_300: guest_pcr_bit = PCR_ARCH_300; - cap = H_GUEST_CAP_POWER9; break; case PVR_ARCH_31: guest_pcr_bit = PCR_ARCH_31; - cap = H_GUEST_CAP_POWER10; break; default: return -EINVAL; @@ -440,6 +456,12 @@ static int kvmppc_set_arch_compat(struct kvm_vcpu *vcpu, u32 arch_compat) return -EINVAL;
if (kvmhv_on_pseries() && kvmhv_is_nestedv2()) { + /* + * 'arch_compat == 0' would mean the guest should default to + * L1's compatibility. In this case, the guest would pick + * host's PCR and evaluate the corresponding capabilities. + */ + cap = map_pcr_to_cap(guest_pcr_bit); if (!(cap & nested_capabilities)) return -EINVAL; } diff --git a/arch/powerpc/kvm/book3s_hv_nestedv2.c b/arch/powerpc/kvm/book3s_hv_nestedv2.c index fd3c4f2d94805..f354af7e85114 100644 --- a/arch/powerpc/kvm/book3s_hv_nestedv2.c +++ b/arch/powerpc/kvm/book3s_hv_nestedv2.c @@ -138,6 +138,7 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb, vector128 v; int rc, i; u16 iden; + u32 arch_compat = 0;
vcpu = gsm->data;
@@ -347,8 +348,23 @@ static int gs_msg_ops_vcpu_fill_info(struct kvmppc_gs_buff *gsb, break; } case KVMPPC_GSID_LOGICAL_PVR: - rc = kvmppc_gse_put_u32(gsb, iden, - vcpu->arch.vcore->arch_compat); + /* + * Though 'arch_compat == 0' would mean the default + * compatibility, arch_compat, being a Guest Wide + * Element, cannot be filled with a value of 0 in GSB + * as this would result into a kernel trap. + * Hence, when `arch_compat == 0`, arch_compat should + * default to L1's PVR. + */ + if (!vcpu->arch.vcore->arch_compat) { + if (cpu_has_feature(CPU_FTR_ARCH_31)) + arch_compat = PVR_ARCH_31; + else if (cpu_has_feature(CPU_FTR_ARCH_300)) + arch_compat = PVR_ARCH_300; + } else { + arch_compat = vcpu->arch.vcore->arch_compat; + } + rc = kvmppc_gse_put_u32(gsb, iden, arch_compat); break; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emil Renner Berthing emil.renner.berthing@canonical.com
[ Upstream commit ae366ba8576da0135d7d3db2dfa6304f3338d0c2 ]
Similar to gpiochip_generic_request() and gpiochip_generic_free() the gpiochip_generic_config() function needs to handle the case where there are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges device tree property.
Commit f34fd6ee1be8 ("gpio: dwapb: Use generic request, free and set_config") set the .set_config callback to gpiochip_generic_config() in the dwapb GPIO driver so the GPIO API can set pinctrl configuration for the corresponding pins. Most boards using the dwapb driver do not set the gpio-ranges device tree property though, and in this case gpiochip_generic_config() would return -EPROPE_DEFER rather than the previous -ENOTSUPP return value. This in turn makes gpio_set_config_with_argument_optional() fail and propagate the error to any driver requesting GPIOs.
Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Reported-by: Jisheng Zhang jszhang@kernel.org Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/ Tested-by: Jisheng Zhang jszhang@kernel.org Signed-off-by: Emil Renner Berthing emil.renner.berthing@canonical.com Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 95d2a7b2ea3e2..15de124d5b402 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2043,6 +2043,11 @@ EXPORT_SYMBOL_GPL(gpiochip_generic_free); int gpiochip_generic_config(struct gpio_chip *gc, unsigned int offset, unsigned long config) { +#ifdef CONFIG_PINCTRL + if (list_empty(&gc->gpiodev->pin_ranges)) + return -ENOTSUPP; +#endif + return pinctrl_gpio_set_config(gc, offset, config); } EXPORT_SYMBOL_GPL(gpiochip_generic_config);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown broonie@kernel.org
[ Upstream commit 9533864816fb4a6207c63b7a98396351ce1a9fae ]
The fields in SMCR_EL1 and SMPRI_EL1 reset to an architecturally UNKNOWN value. Since we do not otherwise manage the traps configured in this register at runtime we need to reconfigure them after a suspend in case nothing else was kind enough to preserve them for us.
The vector length will be restored as part of restoring the SME state for the next SME using task.
Fixes: a1f4ccd25cc2 ("arm64/sme: Provide Kconfig for SME") Reported-by: Jackson Cooper-Driver Jackson.Cooper-Driver@arm.com Signed-off-by: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20240213-arm64-sme-resume-v3-1-17e05e493471@kernel... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/include/asm/fpsimd.h | 2 ++ arch/arm64/kernel/fpsimd.c | 14 ++++++++++++++ arch/arm64/kernel/suspend.c | 3 +++ 3 files changed, 19 insertions(+)
diff --git a/arch/arm64/include/asm/fpsimd.h b/arch/arm64/include/asm/fpsimd.h index 50e5f25d3024c..7780d343ef080 100644 --- a/arch/arm64/include/asm/fpsimd.h +++ b/arch/arm64/include/asm/fpsimd.h @@ -386,6 +386,7 @@ extern void sme_alloc(struct task_struct *task, bool flush); extern unsigned int sme_get_vl(void); extern int sme_set_current_vl(unsigned long arg); extern int sme_get_current_vl(void); +extern void sme_suspend_exit(void);
/* * Return how many bytes of memory are required to store the full SME @@ -421,6 +422,7 @@ static inline int sme_max_vl(void) { return 0; } static inline int sme_max_virtualisable_vl(void) { return 0; } static inline int sme_set_current_vl(unsigned long arg) { return -EINVAL; } static inline int sme_get_current_vl(void) { return -EINVAL; } +static inline void sme_suspend_exit(void) { }
static inline size_t sme_state_size(struct task_struct const *task) { diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index f7d8f5d81cfe9..db1eba8d5f66d 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -1339,6 +1339,20 @@ void __init sme_setup(void) get_sme_default_vl()); }
+void sme_suspend_exit(void) +{ + u64 smcr = 0; + + if (!system_supports_sme()) + return; + + if (system_supports_fa64()) + smcr |= SMCR_ELx_FA64; + + write_sysreg_s(smcr, SYS_SMCR_EL1); + write_sysreg_s(0, SYS_SMPRI_EL1); +} + #endif /* CONFIG_ARM64_SME */
static void sve_init_regs(void) diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index eca4d04352118..eaaff94329cdd 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -12,6 +12,7 @@ #include <asm/daifflags.h> #include <asm/debug-monitors.h> #include <asm/exec.h> +#include <asm/fpsimd.h> #include <asm/mte.h> #include <asm/memory.h> #include <asm/mmu_context.h> @@ -80,6 +81,8 @@ void notrace __cpu_suspend_exit(void) */ spectre_v4_enable_mitigation(NULL);
+ sme_suspend_exit(); + /* Restore additional feature-specific configuration */ ptrauth_suspend_exit(); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Brown broonie@kernel.org
[ Upstream commit d7b77a0d565b048cb0808fa8a4fb031352b22a01 ]
The fields in SMCR_EL1 reset to an architecturally UNKNOWN value. Since we do not otherwise manage the traps configured in this register at runtime we need to reconfigure them after a suspend in case nothing else was kind enough to preserve them for us. Do so for SMCR_EL1.EZT0.
Fixes: d4913eee152d ("arm64/sme: Add basic enumeration for SME2") Reported-by: Jackson Cooper-Driver Jackson.Cooper-Driver@arm.com Signed-off-by: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20240213-arm64-sme-resume-v3-2-17e05e493471@kernel... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/fpsimd.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index db1eba8d5f66d..0898ac9979045 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -1348,6 +1348,8 @@ void sme_suspend_exit(void)
if (system_supports_fa64()) smcr |= SMCR_ELx_FA64; + if (system_supports_sme2()) + smcr |= SMCR_ELx_EZT0;
write_sysreg_s(smcr, SYS_SMCR_EL1); write_sysreg_s(0, SYS_SMPRI_EL1);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 427c70dec738318b7f71e1b9d829ff0e9771d493 ]
Randomly a Lenovo Z13 will trigger a kernel warning traceback from this condition:
``` if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names)))) ```
This happens because thinkpad-acpi always assumes that convert_dytc_to_profile() successfully updated the profile. On the contrary a condition can occur that when dytc_profile_refresh() is called the profile doesn't get updated as there is a -EOPNOTSUPP branch.
Catch this situation and avoid updating the profile. Also log this into dynamic debugging in case any other modes should be added in the future.
Fixes: c3bfcd4c6762 ("platform/x86: thinkpad_acpi: Add platform profile support") Signed-off-by: Mario Limonciello mario.limonciello@amd.com Link: https://lore.kernel.org/r/20240217022311.113879-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index c4895e9bc7148..5ecd9d33250d7 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -10308,6 +10308,7 @@ static int convert_dytc_to_profile(int funcmode, int dytcmode, return 0; default: /* Unknown function */ + pr_debug("unknown function 0x%x\n", funcmode); return -EOPNOTSUPP; } return 0; @@ -10493,8 +10494,8 @@ static void dytc_profile_refresh(void) return;
perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF; - convert_dytc_to_profile(funcmode, perfmode, &profile); - if (profile != dytc_current_profile) { + err = convert_dytc_to_profile(funcmode, perfmode, &profile); + if (!err && profile != dytc_current_profile) { dytc_current_profile = profile; platform_profile_notify(); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maxime Ripard mripard@kernel.org
[ Upstream commit fb1e881273f432e593f8789f99e725b09304cc97 ]
Commit 1fd4a5a36f9f ("drm/connector: Rename legacy TV property") failed to update all the users of the struct drm_tv_connector_state mode field, which resulted in a build failure in i915.
However, a subsequent commit in the same series reintroduced a mode field in that structure, with a different semantic but the same type, with the assumption that all previous users were updated.
Since that didn't happen, the i915 driver now compiles, but mixes accesses to the legacy_mode field and the newer mode field, but with the previous semantics.
This obviously doesn't work very well, so we need to update the accesses that weren't in the legacy renaming commit.
Fixes: 1fd4a5a36f9f ("drm/connector: Rename legacy TV property") Reported-by: Ville Syrjälä ville.syrjala@linux.intel.com Signed-off-by: Maxime Ripard mripard@kernel.org Reviewed-by: Rodrigo Vivi rodrigo.vivi@intel.com Signed-off-by: Rodrigo Vivi rodrigo.vivi@intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20240220131251.453060-1-mripar... (cherry picked from commit bf7626f19d6ff14b9722273e23700400cc4d78ba) Signed-off-by: Joonas Lahtinen joonas.lahtinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/i915/display/intel_sdvo.c | 10 +++++----- drivers/gpu/drm/i915/display/intel_tv.c | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c index a9ac7d45d1f33..312f88d90af95 100644 --- a/drivers/gpu/drm/i915/display/intel_sdvo.c +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c @@ -1208,7 +1208,7 @@ static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo, struct intel_sdvo_tv_format format; u32 format_map;
- format_map = 1 << conn_state->tv.mode; + format_map = 1 << conn_state->tv.legacy_mode; memset(&format, 0, sizeof(format)); memcpy(&format, &format_map, min(sizeof(format), sizeof(format_map)));
@@ -2288,7 +2288,7 @@ static int intel_sdvo_get_tv_modes(struct drm_connector *connector) * Read the list of supported input resolutions for the selected TV * format. */ - format_map = 1 << conn_state->tv.mode; + format_map = 1 << conn_state->tv.legacy_mode; memcpy(&tv_res, &format_map, min(sizeof(format_map), sizeof(struct intel_sdvo_sdtv_resolution_request)));
@@ -2353,7 +2353,7 @@ intel_sdvo_connector_atomic_get_property(struct drm_connector *connector, int i;
for (i = 0; i < intel_sdvo_connector->format_supported_num; i++) - if (state->tv.mode == intel_sdvo_connector->tv_format_supported[i]) { + if (state->tv.legacy_mode == intel_sdvo_connector->tv_format_supported[i]) { *val = i;
return 0; @@ -2409,7 +2409,7 @@ intel_sdvo_connector_atomic_set_property(struct drm_connector *connector, struct intel_sdvo_connector_state *sdvo_state = to_intel_sdvo_connector_state(state);
if (property == intel_sdvo_connector->tv_format) { - state->tv.mode = intel_sdvo_connector->tv_format_supported[val]; + state->tv.legacy_mode = intel_sdvo_connector->tv_format_supported[val];
if (state->crtc) { struct drm_crtc_state *crtc_state = @@ -3066,7 +3066,7 @@ static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, drm_property_add_enum(intel_sdvo_connector->tv_format, i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]);
- intel_sdvo_connector->base.base.state->tv.mode = intel_sdvo_connector->tv_format_supported[0]; + intel_sdvo_connector->base.base.state->tv.legacy_mode = intel_sdvo_connector->tv_format_supported[0]; drm_object_attach_property(&intel_sdvo_connector->base.base.base, intel_sdvo_connector->tv_format, 0); return true; diff --git a/drivers/gpu/drm/i915/display/intel_tv.c b/drivers/gpu/drm/i915/display/intel_tv.c index 2ee4f0d958513..f790fd10ba00a 100644 --- a/drivers/gpu/drm/i915/display/intel_tv.c +++ b/drivers/gpu/drm/i915/display/intel_tv.c @@ -949,7 +949,7 @@ intel_disable_tv(struct intel_atomic_state *state,
static const struct tv_mode *intel_tv_mode_find(const struct drm_connector_state *conn_state) { - int format = conn_state->tv.mode; + int format = conn_state->tv.legacy_mode;
return &tv_modes[format]; } @@ -1710,7 +1710,7 @@ static void intel_tv_find_better_format(struct drm_connector *connector) break; }
- connector->state->tv.mode = i; + connector->state->tv.legacy_mode = i; }
static int @@ -1865,7 +1865,7 @@ static int intel_tv_atomic_check(struct drm_connector *connector, old_state = drm_atomic_get_old_connector_state(state, connector); new_crtc_state = drm_atomic_get_new_crtc_state(state, new_state->crtc);
- if (old_state->tv.mode != new_state->tv.mode || + if (old_state->tv.legacy_mode != new_state->tv.legacy_mode || old_state->tv.margins.left != new_state->tv.margins.left || old_state->tv.margins.right != new_state->tv.margins.right || old_state->tv.margins.top != new_state->tv.margins.top || @@ -1902,7 +1902,7 @@ static void intel_tv_add_properties(struct drm_connector *connector) conn_state->tv.margins.right = 46; conn_state->tv.margins.bottom = 37;
- conn_state->tv.mode = 0; + conn_state->tv.legacy_mode = 0;
/* Create TV properties then attach current values */ for (i = 0; i < ARRAY_SIZE(tv_modes); i++) { @@ -1916,7 +1916,7 @@ static void intel_tv_add_properties(struct drm_connector *connector)
drm_object_attach_property(&connector->base, i915->drm.mode_config.legacy_tv_mode_property, - conn_state->tv.mode); + conn_state->tv.legacy_mode); drm_object_attach_property(&connector->base, i915->drm.mode_config.tv_left_margin_property, conn_state->tv.margins.left);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Liu yi.l.liu@intel.com
[ Upstream commit 29e10487d6df050afeee886b7c1da208f389cb5b ]
Should call domain_update_iotlb() to update the has_iotlb_device flag of the domain after attaching device to nested domain. Without it, this flag is not set properly and would result in missing device TLB flush.
Fixes: 9838f2bb6b6b ("iommu/vt-d: Set the nested domain to a device") Signed-off-by: Yi Liu yi.l.liu@intel.com Reviewed-by: Kevin Tian kevin.tian@intel.com Link: https://lore.kernel.org/r/20240208082307.15759-5-yi.l.liu@intel.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 4 +--- drivers/iommu/intel/iommu.h | 1 + drivers/iommu/intel/nested.c | 2 ++ 3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 897159dba47de..0cc6e08e12c13 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -540,8 +540,6 @@ static int domain_update_device_node(struct dmar_domain *domain) return nid; }
-static void domain_update_iotlb(struct dmar_domain *domain); - /* Return the super pagesize bitmap if supported. */ static unsigned long domain_super_pgsize_bitmap(struct dmar_domain *domain) { @@ -1362,7 +1360,7 @@ domain_lookup_dev_info(struct dmar_domain *domain, return NULL; }
-static void domain_update_iotlb(struct dmar_domain *domain) +void domain_update_iotlb(struct dmar_domain *domain) { struct dev_pasid_info *dev_pasid; struct device_domain_info *info; diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h index ce030c5b5772a..70ac2b989127a 100644 --- a/drivers/iommu/intel/iommu.h +++ b/drivers/iommu/intel/iommu.h @@ -888,6 +888,7 @@ int qi_submit_sync(struct intel_iommu *iommu, struct qi_desc *desc, */ #define QI_OPT_WAIT_DRAIN BIT(0)
+void domain_update_iotlb(struct dmar_domain *domain); int domain_attach_iommu(struct dmar_domain *domain, struct intel_iommu *iommu); void domain_detach_iommu(struct dmar_domain *domain, struct intel_iommu *iommu); void device_block_translation(struct device *dev); diff --git a/drivers/iommu/intel/nested.c b/drivers/iommu/intel/nested.c index b5a5563ab32c6..694c1c4223f66 100644 --- a/drivers/iommu/intel/nested.c +++ b/drivers/iommu/intel/nested.c @@ -65,6 +65,8 @@ static int intel_nested_attach_dev(struct iommu_domain *domain, list_add(&info->link, &dmar_domain->devices); spin_unlock_irqrestore(&dmar_domain->lock, flags);
+ domain_update_iotlb(dmar_domain); + return 0; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Liu yi.l.liu@intel.com
[ Upstream commit 85ce8e1d6d73e8d54cb244d10dd4021771231746 ]
Today the parent domain (s2_domain) is unaware of which DID's are used by and which devices are attached to nested domains (s1_domain) nested on it. This leads to a problem that some operations (flush iotlb/devtlb and enable dirty tracking) on parent domain only apply to DID's and devices directly tracked in the parent domain hence are incomplete.
This tracks the nested domains in list in parent domain. With this, operations on parent domain can loop the nested domains and refer to the devices and iommu_array to ensure the operations on parent domain take effect on all the affected devices and iommus.
Signed-off-by: Yi Liu yi.l.liu@intel.com Reviewed-by: Kevin Tian kevin.tian@intel.com Link: https://lore.kernel.org/r/20240208082307.15759-2-yi.l.liu@intel.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Stable-dep-of: f1e1610950ea ("iommu/vt-d: Add missing dirty tracking set for parent domain") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 18 ++++++++++++++---- drivers/iommu/intel/iommu.h | 6 ++++++ drivers/iommu/intel/nested.c | 12 +++++++++++- 3 files changed, 31 insertions(+), 5 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 0cc6e08e12c13..9f7954c4c26f8 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -4069,6 +4069,7 @@ intel_iommu_domain_alloc_user(struct device *dev, u32 flags, bool dirty_tracking = flags & IOMMU_HWPT_ALLOC_DIRTY_TRACKING; bool nested_parent = flags & IOMMU_HWPT_ALLOC_NEST_PARENT; struct intel_iommu *iommu = info->iommu; + struct dmar_domain *dmar_domain; struct iommu_domain *domain;
/* Must be NESTING domain */ @@ -4094,11 +4095,16 @@ intel_iommu_domain_alloc_user(struct device *dev, u32 flags, if (!domain) return ERR_PTR(-ENOMEM);
- if (nested_parent) - to_dmar_domain(domain)->nested_parent = true; + dmar_domain = to_dmar_domain(domain); + + if (nested_parent) { + dmar_domain->nested_parent = true; + INIT_LIST_HEAD(&dmar_domain->s1_domains); + spin_lock_init(&dmar_domain->s1_lock); + }
if (dirty_tracking) { - if (to_dmar_domain(domain)->use_first_level) { + if (dmar_domain->use_first_level) { iommu_domain_free(domain); return ERR_PTR(-EOPNOTSUPP); } @@ -4110,8 +4116,12 @@ intel_iommu_domain_alloc_user(struct device *dev, u32 flags,
static void intel_iommu_domain_free(struct iommu_domain *domain) { + struct dmar_domain *dmar_domain = to_dmar_domain(domain); + + WARN_ON(dmar_domain->nested_parent && + !list_empty(&dmar_domain->s1_domains)); if (domain != &si_domain->domain) - domain_exit(to_dmar_domain(domain)); + domain_exit(dmar_domain); }
int prepare_domain_attach_device(struct iommu_domain *domain, diff --git a/drivers/iommu/intel/iommu.h b/drivers/iommu/intel/iommu.h index 70ac2b989127a..efc00d2b4527a 100644 --- a/drivers/iommu/intel/iommu.h +++ b/drivers/iommu/intel/iommu.h @@ -630,6 +630,10 @@ struct dmar_domain { int agaw; /* maximum mapped address */ u64 max_addr; + /* Protect the s1_domains list */ + spinlock_t s1_lock; + /* Track s1_domains nested on this domain */ + struct list_head s1_domains; };
/* Nested user domain */ @@ -640,6 +644,8 @@ struct dmar_domain { unsigned long s1_pgtbl; /* page table attributes */ struct iommu_hwpt_vtd_s1 s1_cfg; + /* link to parent domain siblings */ + struct list_head s2_link; }; };
diff --git a/drivers/iommu/intel/nested.c b/drivers/iommu/intel/nested.c index 694c1c4223f66..92e82b33ea979 100644 --- a/drivers/iommu/intel/nested.c +++ b/drivers/iommu/intel/nested.c @@ -72,7 +72,13 @@ static int intel_nested_attach_dev(struct iommu_domain *domain,
static void intel_nested_domain_free(struct iommu_domain *domain) { - kfree(to_dmar_domain(domain)); + struct dmar_domain *dmar_domain = to_dmar_domain(domain); + struct dmar_domain *s2_domain = dmar_domain->s2_domain; + + spin_lock(&s2_domain->s1_lock); + list_del(&dmar_domain->s2_link); + spin_unlock(&s2_domain->s1_lock); + kfree(dmar_domain); }
static const struct iommu_domain_ops intel_nested_domain_ops = { @@ -115,5 +121,9 @@ struct iommu_domain *intel_nested_domain_alloc(struct iommu_domain *parent, spin_lock_init(&domain->lock); xa_init(&domain->iommu_array);
+ spin_lock(&s2_domain->s1_lock); + list_add(&domain->s2_link, &s2_domain->s1_domains); + spin_unlock(&s2_domain->s1_lock); + return &domain->domain; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Liu yi.l.liu@intel.com
[ Upstream commit 56ecaf6c5834ace14941d7f13dceb48bc3327111 ]
The only usage of input @domain is to get the domain id (DID) to flush cache after setting dirty tracking. However, DID can be obtained from the pasid entry. So no need to pass in domain. This can make this helper cleaner when adding the missing dirty tracking for the parent domain, which needs to use the DID of nested domain.
Signed-off-by: Yi Liu yi.l.liu@intel.com Reviewed-by: Joao Martins joao.m.martins@oracle.com Reviewed-by: Kevin Tian kevin.tian@intel.com Link: https://lore.kernel.org/r/20240208082307.15759-7-yi.l.liu@intel.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Stable-dep-of: f1e1610950ea ("iommu/vt-d: Add missing dirty tracking set for parent domain") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 7 +++---- drivers/iommu/intel/pasid.c | 3 +-- drivers/iommu/intel/pasid.h | 1 - 3 files changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 9f7954c4c26f8..88f9b4ffd5774 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -4877,8 +4877,7 @@ static int intel_iommu_set_dirty_tracking(struct iommu_domain *domain, goto out_unlock;
list_for_each_entry(info, &dmar_domain->devices, link) { - ret = intel_pasid_setup_dirty_tracking(info->iommu, - info->domain, info->dev, + ret = intel_pasid_setup_dirty_tracking(info->iommu, info->dev, IOMMU_NO_PASID, enable); if (ret) goto err_unwind; @@ -4892,8 +4891,8 @@ static int intel_iommu_set_dirty_tracking(struct iommu_domain *domain,
err_unwind: list_for_each_entry(info, &dmar_domain->devices, link) - intel_pasid_setup_dirty_tracking(info->iommu, dmar_domain, - info->dev, IOMMU_NO_PASID, + intel_pasid_setup_dirty_tracking(info->iommu, info->dev, + IOMMU_NO_PASID, dmar_domain->dirty_tracking); spin_unlock(&dmar_domain->lock); return ret; diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c index 74e8e4c17e814..9f8f389ff255c 100644 --- a/drivers/iommu/intel/pasid.c +++ b/drivers/iommu/intel/pasid.c @@ -695,7 +695,6 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu, * Set up dirty tracking on a second only or nested translation type. */ int intel_pasid_setup_dirty_tracking(struct intel_iommu *iommu, - struct dmar_domain *domain, struct device *dev, u32 pasid, bool enabled) { @@ -712,7 +711,7 @@ int intel_pasid_setup_dirty_tracking(struct intel_iommu *iommu, return -ENODEV; }
- did = domain_id_iommu(domain, iommu); + did = pasid_get_domain_id(pte); pgtt = pasid_pte_get_pgtt(pte); if (pgtt != PASID_ENTRY_PGTT_SL_ONLY && pgtt != PASID_ENTRY_PGTT_NESTED) { diff --git a/drivers/iommu/intel/pasid.h b/drivers/iommu/intel/pasid.h index dd37611175cc1..3568adca1fd82 100644 --- a/drivers/iommu/intel/pasid.h +++ b/drivers/iommu/intel/pasid.h @@ -107,7 +107,6 @@ int intel_pasid_setup_second_level(struct intel_iommu *iommu, struct dmar_domain *domain, struct device *dev, u32 pasid); int intel_pasid_setup_dirty_tracking(struct intel_iommu *iommu, - struct dmar_domain *domain, struct device *dev, u32 pasid, bool enabled); int intel_pasid_setup_pass_through(struct intel_iommu *iommu,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Liu yi.l.liu@intel.com
[ Upstream commit 0c7f2497b39da44253d7bcf2b41f52b0048859ad ]
Add device_set_dirty_tracking() to loop all the devices and set the dirty tracking per the @enable parameter.
Signed-off-by: Yi Liu yi.l.liu@intel.com Reviewed-by: Kevin Tian kevin.tian@intel.com Reviewed-by: Joao Martins joao.m.martins@oracle.com Link: https://lore.kernel.org/r/20240208082307.15759-8-yi.l.liu@intel.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Stable-dep-of: f1e1610950ea ("iommu/vt-d: Add missing dirty tracking set for parent domain") Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 35 ++++++++++++++++++++++++----------- 1 file changed, 24 insertions(+), 11 deletions(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 88f9b4ffd5774..e3b3ab506b185 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -4865,23 +4865,38 @@ static void *intel_iommu_hw_info(struct device *dev, u32 *length, u32 *type) return vtd; }
+/* + * Set dirty tracking for the device list of a domain. The caller must + * hold the domain->lock when calling it. + */ +static int device_set_dirty_tracking(struct list_head *devices, bool enable) +{ + struct device_domain_info *info; + int ret = 0; + + list_for_each_entry(info, devices, link) { + ret = intel_pasid_setup_dirty_tracking(info->iommu, info->dev, + IOMMU_NO_PASID, enable); + if (ret) + break; + } + + return ret; +} + static int intel_iommu_set_dirty_tracking(struct iommu_domain *domain, bool enable) { struct dmar_domain *dmar_domain = to_dmar_domain(domain); - struct device_domain_info *info; int ret;
spin_lock(&dmar_domain->lock); if (dmar_domain->dirty_tracking == enable) goto out_unlock;
- list_for_each_entry(info, &dmar_domain->devices, link) { - ret = intel_pasid_setup_dirty_tracking(info->iommu, info->dev, - IOMMU_NO_PASID, enable); - if (ret) - goto err_unwind; - } + ret = device_set_dirty_tracking(&dmar_domain->devices, enable); + if (ret) + goto err_unwind;
dmar_domain->dirty_tracking = enable; out_unlock: @@ -4890,10 +4905,8 @@ static int intel_iommu_set_dirty_tracking(struct iommu_domain *domain, return 0;
err_unwind: - list_for_each_entry(info, &dmar_domain->devices, link) - intel_pasid_setup_dirty_tracking(info->iommu, info->dev, - IOMMU_NO_PASID, - dmar_domain->dirty_tracking); + device_set_dirty_tracking(&dmar_domain->devices, + dmar_domain->dirty_tracking); spin_unlock(&dmar_domain->lock); return ret; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Liu yi.l.liu@intel.com
[ Upstream commit f1e1610950eac0af5e40f6ee02315952f78192f7 ]
Setting dirty tracking for a s2 domain requires to loop all the related devices and set the dirty tracking enable bit in the PASID table entry. This includes the devices that are attached to the nested domains of a s2 domain if this s2 domain is used as parent. However, the existing dirty tracking set only loops s2 domain's own devices. It will miss dirty page logs in the parent domain.
Now, the parent domain tracks the nested domains, so it can loop the nested domains and the devices attached to the nested domains to ensure dirty tracking on the parent is set completely.
Fixes: b41e38e22539 ("iommu/vt-d: Add nested domain allocation") Signed-off-by: Yi Sun yi.y.sun@linux.intel.com Signed-off-by: Yi Liu yi.l.liu@intel.com Reviewed-by: Kevin Tian kevin.tian@intel.com Link: https://lore.kernel.org/r/20240208082307.15759-9-yi.l.liu@intel.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/iommu.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index e3b3ab506b185..a8366b1f4f48b 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -4884,6 +4884,35 @@ static int device_set_dirty_tracking(struct list_head *devices, bool enable) return ret; }
+static int parent_domain_set_dirty_tracking(struct dmar_domain *domain, + bool enable) +{ + struct dmar_domain *s1_domain; + unsigned long flags; + int ret; + + spin_lock(&domain->s1_lock); + list_for_each_entry(s1_domain, &domain->s1_domains, s2_link) { + spin_lock_irqsave(&s1_domain->lock, flags); + ret = device_set_dirty_tracking(&s1_domain->devices, enable); + spin_unlock_irqrestore(&s1_domain->lock, flags); + if (ret) + goto err_unwind; + } + spin_unlock(&domain->s1_lock); + return 0; + +err_unwind: + list_for_each_entry(s1_domain, &domain->s1_domains, s2_link) { + spin_lock_irqsave(&s1_domain->lock, flags); + device_set_dirty_tracking(&s1_domain->devices, + domain->dirty_tracking); + spin_unlock_irqrestore(&s1_domain->lock, flags); + } + spin_unlock(&domain->s1_lock); + return ret; +} + static int intel_iommu_set_dirty_tracking(struct iommu_domain *domain, bool enable) { @@ -4898,6 +4927,12 @@ static int intel_iommu_set_dirty_tracking(struct iommu_domain *domain, if (ret) goto err_unwind;
+ if (dmar_domain->nested_parent) { + ret = parent_domain_set_dirty_tracking(dmar_domain, enable); + if (ret) + goto err_unwind; + } + dmar_domain->dirty_tracking = enable; out_unlock: spin_unlock(&dmar_domain->lock);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yi Liu yi.l.liu@intel.com
[ Upstream commit 1f0198fce68340e0da2d438f4ea9fc20d2c958da ]
Should set the SSADE (Second Stage Access/Dirty bit Enable) bit of the pasid entry when attaching a device to a nested domain if its parent has already enabled dirty tracking.
Fixes: 111bf85c68f6 ("iommu/vt-d: Add helper to setup pasid nested translation") Signed-off-by: Yi Liu yi.l.liu@intel.com Reviewed-by: Joao Martins joao.m.martins@oracle.com Link: https://lore.kernel.org/r/20240208091414.28133-1-yi.l.liu@intel.com Signed-off-by: Lu Baolu baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/intel/pasid.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/iommu/intel/pasid.c b/drivers/iommu/intel/pasid.c index 9f8f389ff255c..6e102cbbde845 100644 --- a/drivers/iommu/intel/pasid.c +++ b/drivers/iommu/intel/pasid.c @@ -925,6 +925,8 @@ int intel_pasid_setup_nested(struct intel_iommu *iommu, struct device *dev, pasid_set_domain_id(pte, did); pasid_set_address_width(pte, s2_domain->agaw); pasid_set_page_snoop(pte, !!ecap_smpwc(iommu->ecap)); + if (s2_domain->dirty_tracking) + pasid_set_ssade(pte); pasid_set_translation_type(pte, PASID_ENTRY_PGTT_NESTED); pasid_set_present(pte); spin_unlock(&iommu->lock);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Subbaraya Sundeep sbhatta@marvell.com
[ Upstream commit 3b1ae9b71c2a97f848b00fb085a2bd29bddbe8d9 ]
AF reserves MCAM entries for each PF, VF present in the system and populates the entry with DMAC and action with default RSS so that basic packet I/O works. Since PF/VF is not aware of the RSS action installed by AF, AF only fixup the actions of the rules installed by PF/VF with corresponding default RSS action. This worked well for rules installed by PF/VF for features like RX VLAN offload and DMAC filters but rules involving action like drop/forward to queue are also getting modified by AF. Hence fix it by setting the default RSS action only if requested by PF/VF.
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Subbaraya Sundeep sbhatta@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 3784347b6fd88..55639c133dd02 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -437,6 +437,10 @@ static void npc_fixup_vf_rule(struct rvu *rvu, struct npc_mcam *mcam, return; }
+ /* AF modifies given action iff PF/VF has requested for it */ + if ((entry->action & 0xFULL) != NIX_RX_ACTION_DEFAULT) + return; + /* copy VF default entry action to the VF mcam entry */ rx_action = npc_get_default_entry_action(rvu, mcam, blkaddr, target_func);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet edumazet@google.com
[ Upstream commit 56667da7399eb19af857e30f41bea89aa6fa812c ]
syzbot reported a lockdep violation [1] involving af_unix support of SO_PEEK_OFF.
Since SO_PEEK_OFF is inherently not thread safe (it uses a per-socket sk_peek_off field), there is really no point to enforce a pointless thread safety in the kernel.
After this patch :
- setsockopt(SO_PEEK_OFF) no longer acquires the socket lock.
- skb_consume_udp() no longer has to acquire the socket lock.
- af_unix no longer needs a special version of sk_set_peek_off(), because it does not lock u->iolock anymore.
As a followup, we could replace prot->set_peek_off to be a boolean and avoid an indirect call, since we always use sk_set_peek_off().
[1]
WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Not tainted
syz-executor.2/30025 is trying to acquire lock: ffff8880765e7d80 (&u->iolock){+.+.}-{3:3}, at: unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789
but task is already holding lock: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_UNIX){+.+.}-{0:0}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_nested+0x48/0x100 net/core/sock.c:3524 lock_sock include/net/sock.h:1691 [inline] __unix_dgram_recvmsg+0x1275/0x12c0 net/unix/af_unix.c:2415 sock_recvmsg_nosec+0x18e/0x1d0 net/socket.c:1046 ____sys_recvmsg+0x3c0/0x470 net/socket.c:2801 ___sys_recvmsg net/socket.c:2845 [inline] do_recvmmsg+0x474/0xae0 net/socket.c:2939 __sys_recvmmsg net/socket.c:3018 [inline] __do_sys_recvmmsg net/socket.c:3041 [inline] __se_sys_recvmmsg net/socket.c:3034 [inline] __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77
-> #0 (&u->iolock){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1 ---- ---- lock(sk_lock-AF_UNIX); lock(&u->iolock); lock(sk_lock-AF_UNIX); lock(&u->iolock);
*** DEADLOCK ***
1 lock held by syz-executor.2/30025: #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1691 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sockopt_lock_sock net/core/sock.c:1060 [inline] #0: ffff8880765e7930 (sk_lock-AF_UNIX){+.+.}-{0:0}, at: sk_setsockopt+0xe52/0x3360 net/core/sock.c:1193
stack backtrace: CPU: 0 PID: 30025 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00267-g0f1dd5e91e2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2e0 lib/dump_stack.c:106 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __mutex_lock_common kernel/locking/mutex.c:608 [inline] __mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752 unix_set_peek_off+0x26/0xa0 net/unix/af_unix.c:789 sk_setsockopt+0x207e/0x3360 do_sock_setsockopt+0x2fb/0x720 net/socket.c:2307 __sys_setsockopt+0x1ad/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f78a1c7dda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f78a0fde0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007f78a1dac050 RCX: 00007f78a1c7dda9 RDX: 000000000000002a RSI: 0000000000000001 RDI: 0000000000000006 RBP: 00007f78a1cca47a R08: 0000000000000004 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f78a1dac050 R15: 00007ffe5cd81ae8
Fixes: 859051dd165e ("bpf: Implement cgroup sockaddr hooks for unix sockets") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Willem de Bruijn willemdebruijn.kernel@gmail.com Cc: Daan De Meyer daan.j.demeyer@gmail.com Cc: Kuniyuki Iwashima kuniyu@amazon.com Cc: Martin KaFai Lau martin.lau@kernel.org Cc: David Ahern dsahern@kernel.org Reviewed-by: Willem de Bruijn willemb@google.com Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/sock.c | 23 +++++++++++------------ net/ipv4/udp.c | 7 +------ net/unix/af_unix.c | 19 +++---------------- 3 files changed, 15 insertions(+), 34 deletions(-)
diff --git a/net/core/sock.c b/net/core/sock.c index e5d43a068f8ed..20160865ede9c 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1192,6 +1192,17 @@ int sk_setsockopt(struct sock *sk, int level, int optname, */ WRITE_ONCE(sk->sk_txrehash, (u8)val); return 0; + case SO_PEEK_OFF: + { + int (*set_peek_off)(struct sock *sk, int val); + + set_peek_off = READ_ONCE(sock->ops)->set_peek_off; + if (set_peek_off) + ret = set_peek_off(sk, val); + else + ret = -EOPNOTSUPP; + return ret; + } }
sockopt_lock_sock(sk); @@ -1434,18 +1445,6 @@ int sk_setsockopt(struct sock *sk, int level, int optname, sock_valbool_flag(sk, SOCK_WIFI_STATUS, valbool); break;
- case SO_PEEK_OFF: - { - int (*set_peek_off)(struct sock *sk, int val); - - set_peek_off = READ_ONCE(sock->ops)->set_peek_off; - if (set_peek_off) - ret = set_peek_off(sk, val); - else - ret = -EOPNOTSUPP; - break; - } - case SO_NOFCS: sock_valbool_flag(sk, SOCK_NOFCS, valbool); break; diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index f631b0a21af4c..e474b201900f9 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1589,12 +1589,7 @@ int udp_init_sock(struct sock *sk)
void skb_consume_udp(struct sock *sk, struct sk_buff *skb, int len) { - if (unlikely(READ_ONCE(sk->sk_peek_off) >= 0)) { - bool slow = lock_sock_fast(sk); - - sk_peek_offset_bwd(sk, len); - unlock_sock_fast(sk, slow); - } + sk_peek_offset_bwd(sk, len);
if (!skb_unref(skb)) return; diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 30b178ebba60a..0748e7ea5210e 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -782,19 +782,6 @@ static int unix_seqpacket_sendmsg(struct socket *, struct msghdr *, size_t); static int unix_seqpacket_recvmsg(struct socket *, struct msghdr *, size_t, int);
-static int unix_set_peek_off(struct sock *sk, int val) -{ - struct unix_sock *u = unix_sk(sk); - - if (mutex_lock_interruptible(&u->iolock)) - return -EINTR; - - WRITE_ONCE(sk->sk_peek_off, val); - mutex_unlock(&u->iolock); - - return 0; -} - #ifdef CONFIG_PROC_FS static int unix_count_nr_fds(struct sock *sk) { @@ -862,7 +849,7 @@ static const struct proto_ops unix_stream_ops = { .read_skb = unix_stream_read_skb, .mmap = sock_no_mmap, .splice_read = unix_stream_splice_read, - .set_peek_off = unix_set_peek_off, + .set_peek_off = sk_set_peek_off, .show_fdinfo = unix_show_fdinfo, };
@@ -886,7 +873,7 @@ static const struct proto_ops unix_dgram_ops = { .read_skb = unix_read_skb, .recvmsg = unix_dgram_recvmsg, .mmap = sock_no_mmap, - .set_peek_off = unix_set_peek_off, + .set_peek_off = sk_set_peek_off, .show_fdinfo = unix_show_fdinfo, };
@@ -909,7 +896,7 @@ static const struct proto_ops unix_seqpacket_ops = { .sendmsg = unix_seqpacket_sendmsg, .recvmsg = unix_seqpacket_recvmsg, .mmap = sock_no_mmap, - .set_peek_off = unix_set_peek_off, + .set_peek_off = sk_set_peek_off, .show_fdinfo = unix_show_fdinfo, };
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Elder elder@linaro.org
[ Upstream commit d80f8e96d47d7374794a30fbed69be43f3388afc ]
In newer hardware, IPA supports more than 32 endpoints. Some registers--such as IPA interrupt registers--represent endpoints as bits in a 4-byte register, and such registers are repeated as needed to represent endpoints beyond the first 32.
In ipa_interrupt_suspend_clear_all(), we clear all pending IPA suspend interrupts by reading all status register(s) and writing corresponding registers to clear interrupt conditions.
Unfortunately the number of registers to read/write is calculated incorrectly, and as a result we access *many* more registers than intended. This bug occurs only when the IPA hardware signals a SUSPEND interrupt, which happens when a packet is received for an endpoint (or its underlying GSI channel) that is suspended. This situation is difficult to reproduce, but possible.
Fix this by correctly computing the number of interrupt registers to read and write. This is the only place in the code where registers that map endpoints or channels this way perform this calculation.
Fixes: f298ba785e2d ("net: ipa: add a parameter to suspend registers") Signed-off-by: Alex Elder elder@linaro.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ipa/ipa_interrupt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ipa/ipa_interrupt.c b/drivers/net/ipa/ipa_interrupt.c index 4bc05948f772d..a78c692f2d3c5 100644 --- a/drivers/net/ipa/ipa_interrupt.c +++ b/drivers/net/ipa/ipa_interrupt.c @@ -212,7 +212,7 @@ void ipa_interrupt_suspend_clear_all(struct ipa_interrupt *interrupt) u32 unit_count; u32 unit;
- unit_count = roundup(ipa->endpoint_count, 32); + unit_count = DIV_ROUND_UP(ipa->endpoint_count, 32); for (unit = 0; unit < unit_count; unit++) { const struct reg *reg; u32 val;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe jgg@nvidia.com
[ Upstream commit 7adc0c1cfa7732b81bf7bf2ed16ffb99719ceebf ]
Since the current design doesn't forward the data_type to the driver to check unless there is a data_len/uptr for a driver specific struct we should check and ensure that data_type is 0 if data_len is 0. Otherwise any value is permitted.
Fixes: bd529dbb661d ("iommufd: Add a nested HW pagetable object") Link: https://lore.kernel.org/r/0-v1-9b1ea6869554+110c60-iommufd_ck_data_type_jgg@... Reviewed-by: Kevin Tian kevin.tian@intel.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommufd/hw_pagetable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/iommufd/hw_pagetable.c b/drivers/iommu/iommufd/hw_pagetable.c index cbb5df0a6c32f..6f680959b23ed 100644 --- a/drivers/iommu/iommufd/hw_pagetable.c +++ b/drivers/iommu/iommufd/hw_pagetable.c @@ -261,7 +261,8 @@ int iommufd_hwpt_alloc(struct iommufd_ucmd *ucmd)
if (cmd->__reserved) return -EOPNOTSUPP; - if (cmd->data_type == IOMMU_HWPT_DATA_NONE && cmd->data_len) + if ((cmd->data_type == IOMMU_HWPT_DATA_NONE && cmd->data_len) || + (cmd->data_type != IOMMU_HWPT_DATA_NONE && !cmd->data_len)) return -EINVAL;
idev = iommufd_get_device(ucmd, cmd->dev_id);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe jgg@nvidia.com
[ Upstream commit 723a2cc8d69d4342b47dfddbfe6c19f1b135f09b ]
The signature for __iowrite64_copy() requires the number of 64 bit quantities, not bytes. Multiple by 8 to get to a byte length before invoking zpci_memcpy_toio()
Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn") Acked-by: Niklas Schnelle schnelle@linux.ibm.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia... Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index 676ac74026a82..52a44e353796c 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -252,7 +252,7 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, /* combine single writes by using store-block insn */ void __iowrite64_copy(void __iomem *to, const void *from, size_t count) { - zpci_memcpy_toio(to, from, count); + zpci_memcpy_toio(to, from, count * 8); }
void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shigeru Yoshida syoshida@redhat.com
[ Upstream commit 4cd12c6065dfcdeba10f49949bffcf383b3952d8 ]
syzbot reported the following NULL pointer dereference issue [1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:0x0 [...] Call Trace: <TASK> sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230 unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77
If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called concurrently, psock->saved_data_ready can be NULL, causing the above issue.
This patch fixes this issue by calling the appropriate data ready function using the sk_psock_data_ready() helper and protecting it from concurrency with sk->sk_callback_lock.
Fixes: 6df7f764cd3c ("bpf, sockmap: Wake up polling after data copy") Reported-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com Signed-off-by: Shigeru Yoshida syoshida@redhat.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Tested-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com Acked-by: John Fastabend john.fastabend@gmail.com Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1] Link: https://lore.kernel.org/bpf/20240218150933.6004-1-syoshida@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/skmsg.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/core/skmsg.c b/net/core/skmsg.c index 93ecfceac1bc4..4d75ef9d24bfa 100644 --- a/net/core/skmsg.c +++ b/net/core/skmsg.c @@ -1226,8 +1226,11 @@ static void sk_psock_verdict_data_ready(struct sock *sk)
rcu_read_lock(); psock = sk_psock(sk); - if (psock) - psock->saved_data_ready(sk); + if (psock) { + read_lock_bh(&sk->sk_callback_lock); + sk_psock_data_ready(sk, psock); + read_unlock_bh(&sk->sk_callback_lock); + } rcu_read_unlock(); } }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com
[ Upstream commit 9bd405c48b0ac4de087c0c4440fd79597201b8a7 ]
Align the end size to cache boundary size in ax45mp_dma_cache_wback() callback likewise done in ax45mp_dma_cache_inv() callback.
Additionally return early in case of start == end.
Fixes: d34599bcd2e4 ("cache: Add L2 cache management for Andes AX45MP RISC-V core") Reported-by: Pavel Machek pavel@denx.de Link: https://lore.kernel.org/cip-dev/ZYsdKDiw7G+kxQ3m@duo.ucw.cz/ Signed-off-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cache/ax45mp_cache.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/cache/ax45mp_cache.c b/drivers/cache/ax45mp_cache.c index 57186c58dc849..1d7dd3d2c101c 100644 --- a/drivers/cache/ax45mp_cache.c +++ b/drivers/cache/ax45mp_cache.c @@ -129,8 +129,12 @@ static void ax45mp_dma_cache_wback(phys_addr_t paddr, size_t size) unsigned long line_size; unsigned long flags;
+ if (unlikely(start == end)) + return; + line_size = ax45mp_priv.ax45mp_cache_line_size; start = start & (~(line_size - 1)); + end = ((end + line_size - 1) & (~(line_size - 1))); local_irq_save(flags); ax45mp_cpu_dcache_wb_range(start, end); local_irq_restore(flags);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guenter Roeck linux@roeck-us.net
[ Upstream commit d56e460e19ea8382f813eb489730248ec8d7eb73 ]
The number of temperature configuration registers does not always match the total number of temperature registers. This can result in access errors reported if KASAN is enabled.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x5654/0x6fe9 nct6775_core
Reported-by: Erhard Furtner erhard_f@mailbox.org Closes: https://lore.kernel.org/linux-hwmon/d51181d1-d26b-42b2-b002-3f5a4037721f@roe... Fixes: b7f1f7b2523a ("hwmon: (nct6775) Additional TEMP registers for nct6799") Cc: Ahmad Khalifa ahmad@khalifa.ws Tested-by: Ahmad Khalifa ahmad@khalifa.ws Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/nct6775-core.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/nct6775-core.c b/drivers/hwmon/nct6775-core.c index 92a49fafe2c02..f3bf2e4701c38 100644 --- a/drivers/hwmon/nct6775-core.c +++ b/drivers/hwmon/nct6775-core.c @@ -3512,6 +3512,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, const u16 *reg_temp_mon, *reg_temp_alternate, *reg_temp_crit; const u16 *reg_temp_crit_l = NULL, *reg_temp_crit_h = NULL; int num_reg_temp, num_reg_temp_mon, num_reg_tsi_temp; + int num_reg_temp_config; struct device *hwmon_dev; struct sensor_template_group tsi_temp_tg;
@@ -3594,6 +3595,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_over = NCT6106_REG_TEMP_OVER; reg_temp_hyst = NCT6106_REG_TEMP_HYST; reg_temp_config = NCT6106_REG_TEMP_CONFIG; + num_reg_temp_config = ARRAY_SIZE(NCT6106_REG_TEMP_CONFIG); reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6106_REG_TEMP_CRIT; reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L; @@ -3669,6 +3671,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_over = NCT6106_REG_TEMP_OVER; reg_temp_hyst = NCT6106_REG_TEMP_HYST; reg_temp_config = NCT6106_REG_TEMP_CONFIG; + num_reg_temp_config = ARRAY_SIZE(NCT6106_REG_TEMP_CONFIG); reg_temp_alternate = NCT6106_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6106_REG_TEMP_CRIT; reg_temp_crit_l = NCT6106_REG_TEMP_CRIT_L; @@ -3746,6 +3749,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_over = NCT6775_REG_TEMP_OVER; reg_temp_hyst = NCT6775_REG_TEMP_HYST; reg_temp_config = NCT6775_REG_TEMP_CONFIG; + num_reg_temp_config = ARRAY_SIZE(NCT6775_REG_TEMP_CONFIG); reg_temp_alternate = NCT6775_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6775_REG_TEMP_CRIT;
@@ -3821,6 +3825,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_over = NCT6775_REG_TEMP_OVER; reg_temp_hyst = NCT6775_REG_TEMP_HYST; reg_temp_config = NCT6776_REG_TEMP_CONFIG; + num_reg_temp_config = ARRAY_SIZE(NCT6776_REG_TEMP_CONFIG); reg_temp_alternate = NCT6776_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6776_REG_TEMP_CRIT;
@@ -3900,6 +3905,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_over = NCT6779_REG_TEMP_OVER; reg_temp_hyst = NCT6779_REG_TEMP_HYST; reg_temp_config = NCT6779_REG_TEMP_CONFIG; + num_reg_temp_config = ARRAY_SIZE(NCT6779_REG_TEMP_CONFIG); reg_temp_alternate = NCT6779_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6779_REG_TEMP_CRIT;
@@ -4034,6 +4040,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_over = NCT6779_REG_TEMP_OVER; reg_temp_hyst = NCT6779_REG_TEMP_HYST; reg_temp_config = NCT6779_REG_TEMP_CONFIG; + num_reg_temp_config = ARRAY_SIZE(NCT6779_REG_TEMP_CONFIG); reg_temp_alternate = NCT6779_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6779_REG_TEMP_CRIT;
@@ -4123,6 +4130,7 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, reg_temp_over = NCT6798_REG_TEMP_OVER; reg_temp_hyst = NCT6798_REG_TEMP_HYST; reg_temp_config = NCT6779_REG_TEMP_CONFIG; + num_reg_temp_config = ARRAY_SIZE(NCT6779_REG_TEMP_CONFIG); reg_temp_alternate = NCT6798_REG_TEMP_ALTERNATE; reg_temp_crit = NCT6798_REG_TEMP_CRIT;
@@ -4204,7 +4212,8 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, = reg_temp_crit[src - 1]; if (reg_temp_crit_l && reg_temp_crit_l[i]) data->reg_temp[4][src - 1] = reg_temp_crit_l[i]; - data->reg_temp_config[src - 1] = reg_temp_config[i]; + if (i < num_reg_temp_config) + data->reg_temp_config[src - 1] = reg_temp_config[i]; data->temp_src[src - 1] = src; continue; } @@ -4217,7 +4226,8 @@ int nct6775_probe(struct device *dev, struct nct6775_data *data, data->reg_temp[0][s] = reg_temp[i]; data->reg_temp[1][s] = reg_temp_over[i]; data->reg_temp[2][s] = reg_temp_hyst[i]; - data->reg_temp_config[s] = reg_temp_config[i]; + if (i < num_reg_temp_config) + data->reg_temp_config[s] = reg_temp_config[i]; if (reg_temp_crit_h && reg_temp_crit_h[i]) data->reg_temp[3][s] = reg_temp_crit_h[i]; else if (reg_temp_crit[src - 1])
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca sd@queasysnail.net
[ Upstream commit 10f41d0710fc81b7af93fa6106678d57b1ff24a7 ]
PEEK needs to leave decrypted records on the rx_list so that we can receive them later on, so it jumps back into the async code that queues the skb. Unfortunately that makes us skip the TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two records of the same (non-DATA) type are queued, we end up merging them.
Add the same record type check, and make it unlikely to not penalize the async fastpath. Async decrypt only applies to data record, so this check is only needed for PEEK.
process_rx_list also has similar issues.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca sd@queasysnail.net Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.170800737... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/tls/tls_sw.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 9fbc70200cd0f..78aedfc682ba8 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -2064,6 +2064,8 @@ int tls_sw_recvmsg(struct sock *sk, decrypted += chunk; len -= chunk; __skb_queue_tail(&ctx->rx_list, skb); + if (unlikely(control != TLS_RECORD_TYPE_DATA)) + break; continue; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca sd@queasysnail.net
[ Upstream commit fdfbaec5923d9359698cbb286bc0deadbb717504 ]
If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list did some work.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca sd@queasysnail.net Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.170800737... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/tls/tls_sw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 78aedfc682ba8..43dd0d82b6ed7 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1971,7 +1971,7 @@ int tls_sw_recvmsg(struct sock *sk, goto end;
copied = err; - if (len <= copied) + if (len <= copied || (copied && control != TLS_RECORD_TYPE_DATA)) goto end;
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sabrina Dubroca sd@queasysnail.net
[ Upstream commit ec823bf3a479d42c589dc0f28ef4951c49cd2d2a ]
If we queue 3 records: - record 1, type DATA - record 2, some other type - record 3, type DATA and do a recv(PEEK), the rx_list will contain the first two records.
The next large recv will walk through the rx_list and copy data from record 1, then stop because record 2 is a different type. Since we haven't filled up our buffer, we will process the next available record. It's also DATA, so we can merge it with the current read.
We shouldn't do that, since there was a record in between that we ignored.
Add a flag to let process_rx_list inform tls_sw_recvmsg that it had more data available.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca sd@queasysnail.net Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.170800737... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/tls/tls_sw.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 43dd0d82b6ed7..de96959336c48 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1772,7 +1772,8 @@ static int process_rx_list(struct tls_sw_context_rx *ctx, u8 *control, size_t skip, size_t len, - bool is_peek) + bool is_peek, + bool *more) { struct sk_buff *skb = skb_peek(&ctx->rx_list); struct tls_msg *tlm; @@ -1785,7 +1786,7 @@ static int process_rx_list(struct tls_sw_context_rx *ctx,
err = tls_record_content_type(msg, tlm, control); if (err <= 0) - goto out; + goto more;
if (skip < rxm->full_len) break; @@ -1803,12 +1804,12 @@ static int process_rx_list(struct tls_sw_context_rx *ctx,
err = tls_record_content_type(msg, tlm, control); if (err <= 0) - goto out; + goto more;
err = skb_copy_datagram_msg(skb, rxm->offset + skip, msg, chunk); if (err < 0) - goto out; + goto more;
len = len - chunk; copied = copied + chunk; @@ -1844,6 +1845,10 @@ static int process_rx_list(struct tls_sw_context_rx *ctx,
out: return copied ? : err; +more: + if (more) + *more = true; + goto out; }
static bool @@ -1947,6 +1952,7 @@ int tls_sw_recvmsg(struct sock *sk, int target, err; bool is_kvec = iov_iter_is_kvec(&msg->msg_iter); bool is_peek = flags & MSG_PEEK; + bool rx_more = false; bool released = true; bool bpf_strp_enabled; bool zc_capable; @@ -1966,12 +1972,12 @@ int tls_sw_recvmsg(struct sock *sk, goto end;
/* Process pending decrypted records. It must be non-zero-copy */ - err = process_rx_list(ctx, msg, &control, 0, len, is_peek); + err = process_rx_list(ctx, msg, &control, 0, len, is_peek, &rx_more); if (err < 0) goto end;
copied = err; - if (len <= copied || (copied && control != TLS_RECORD_TYPE_DATA)) + if (len <= copied || (copied && control != TLS_RECORD_TYPE_DATA) || rx_more) goto end;
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len); @@ -2130,10 +2136,10 @@ int tls_sw_recvmsg(struct sock *sk, /* Drain records from the rx_list & copy if required */ if (is_peek || is_kvec) err = process_rx_list(ctx, msg, &control, copied, - decrypted, is_peek); + decrypted, is_peek, NULL); else err = process_rx_list(ctx, msg, &control, 0, - async_copy_bytes, is_peek); + async_copy_bytes, is_peek, NULL); }
copied += decrypted;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
[ Upstream commit bccebf64701735533c8db37773eeacc6566cc8ec ]
We need to set the dormant flag again if we fail to register the hooks.
During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core.
Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 04c5aa4debc74..dc26986fd4b93 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -1251,6 +1251,7 @@ static int nf_tables_updtable(struct nft_ctx *ctx) return 0;
err_register_hooks: + ctx->table->flags |= NFT_TABLE_F_DORMANT; nft_trans_destroy(trans); return ret; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
[ Upstream commit 9e0f0430389be7696396c62f037be4bf72cf93e3 ]
dst is transferred to the flow object, route object does not own it anymore. Reset dst in route object, otherwise if flow_offload_add() fails, error path releases dst twice, leading to a refcount underflow.
Fixes: a3c90f7a2323 ("netfilter: nf_tables: flow offload expression") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/netfilter/nf_flow_table.h | 2 +- net/netfilter/nf_flow_table_core.c | 16 +++++++++++++--- 2 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/include/net/netfilter/nf_flow_table.h b/include/net/netfilter/nf_flow_table.h index 692d5955911c7..4a767b3d20b9d 100644 --- a/include/net/netfilter/nf_flow_table.h +++ b/include/net/netfilter/nf_flow_table.h @@ -275,7 +275,7 @@ nf_flow_table_offload_del_cb(struct nf_flowtable *flow_table, }
void flow_offload_route_init(struct flow_offload *flow, - const struct nf_flow_route *route); + struct nf_flow_route *route);
int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow); void flow_offload_refresh(struct nf_flowtable *flow_table, diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c index 920a5a29ae1dc..7502d6d73a600 100644 --- a/net/netfilter/nf_flow_table_core.c +++ b/net/netfilter/nf_flow_table_core.c @@ -87,12 +87,22 @@ static u32 flow_offload_dst_cookie(struct flow_offload_tuple *flow_tuple) return 0; }
+static struct dst_entry *nft_route_dst_fetch(struct nf_flow_route *route, + enum flow_offload_tuple_dir dir) +{ + struct dst_entry *dst = route->tuple[dir].dst; + + route->tuple[dir].dst = NULL; + + return dst; +} + static int flow_offload_fill_route(struct flow_offload *flow, - const struct nf_flow_route *route, + struct nf_flow_route *route, enum flow_offload_tuple_dir dir) { struct flow_offload_tuple *flow_tuple = &flow->tuplehash[dir].tuple; - struct dst_entry *dst = route->tuple[dir].dst; + struct dst_entry *dst = nft_route_dst_fetch(route, dir); int i, j = 0;
switch (flow_tuple->l3proto) { @@ -146,7 +156,7 @@ static void nft_flow_dst_release(struct flow_offload *flow, }
void flow_offload_route_init(struct flow_offload *flow, - const struct nf_flow_route *route) + struct nf_flow_route *route) { flow_offload_fill_route(flow, route, FLOW_OFFLOAD_DIR_ORIGINAL); flow_offload_fill_route(flow, route, FLOW_OFFLOAD_DIR_REPLY);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
[ Upstream commit 8762785f459be1cfe6fcf7285c123aad6a3703f0 ]
Direct xmit does not use it since it calls dev_queue_xmit() to send packets, hence it calls dst_release().
kmemleak reports:
unreferenced object 0xffff88814f440900 (size 184): comm "softirq", pid 0, jiffies 4294951896 hex dump (first 32 bytes): 00 60 5b 04 81 88 ff ff 00 e6 e8 82 ff ff ff ff .`[............. 21 0b 50 82 ff ff ff ff 00 00 00 00 00 00 00 00 !.P............. backtrace (crc cb2bf5d6): [<000000003ee17107>] kmem_cache_alloc+0x286/0x340 [<0000000021a5de2c>] dst_alloc+0x43/0xb0 [<00000000f0671159>] rt_dst_alloc+0x2e/0x190 [<00000000fe5092c9>] __mkroute_output+0x244/0x980 [<000000005fb96fb0>] ip_route_output_flow+0xc0/0x160 [<0000000045367433>] nf_ip_route+0xf/0x30 [<0000000085da1d8e>] nf_route+0x2d/0x60 [<00000000d1ecd1cb>] nft_flow_route+0x171/0x6a0 [nft_flow_offload] [<00000000d9b2fb60>] nft_flow_offload_eval+0x4e8/0x700 [nft_flow_offload] [<000000009f447dbb>] expr_call_ops_eval+0x53/0x330 [nf_tables] [<00000000072e1be6>] nft_do_chain+0x17c/0x840 [nf_tables] [<00000000d0551029>] nft_do_chain_inet+0xa1/0x210 [nf_tables] [<0000000097c9d5c6>] nf_hook_slow+0x5b/0x160 [<0000000005eccab1>] ip_forward+0x8b6/0x9b0 [<00000000553a269b>] ip_rcv+0x221/0x230 [<00000000412872e5>] __netif_receive_skb_one_core+0xfe/0x110
Fixes: fa502c865666 ("netfilter: flowtable: simplify route logic") Reported-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_flow_table_core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c index 7502d6d73a600..a0571339239c4 100644 --- a/net/netfilter/nf_flow_table_core.c +++ b/net/netfilter/nf_flow_table_core.c @@ -132,6 +132,7 @@ static int flow_offload_fill_route(struct flow_offload *flow, ETH_ALEN); flow_tuple->out.ifidx = route->tuple[dir].out.ifindex; flow_tuple->out.hw_ifidx = route->tuple[dir].out.hw_ifindex; + dst_release(dst); break; case FLOW_OFFLOAD_XMIT_XFRM: case FLOW_OFFLOAD_XMIT_NEIGH:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Pablo Neira Ayuso pablo@netfilter.org
[ Upstream commit d472e9853d7b46a6b094224d131d09ccd3a03daf ]
Register hooks last when adding chain/flowtable to ensure that packets do not walk over datastructure that is being released in the error path without waiting for the rcu grace period.
Fixes: 91c7b38dc9f0 ("netfilter: nf_tables: use new transaction infrastructure to handle chain") Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend") Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 78 ++++++++++++++++++----------------- 1 file changed, 40 insertions(+), 38 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index dc26986fd4b93..6901067d715dc 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -684,15 +684,16 @@ static int nft_delobj(struct nft_ctx *ctx, struct nft_object *obj) return err; }
-static int nft_trans_flowtable_add(struct nft_ctx *ctx, int msg_type, - struct nft_flowtable *flowtable) +static struct nft_trans * +nft_trans_flowtable_add(struct nft_ctx *ctx, int msg_type, + struct nft_flowtable *flowtable) { struct nft_trans *trans;
trans = nft_trans_alloc(ctx, msg_type, sizeof(struct nft_trans_flowtable)); if (trans == NULL) - return -ENOMEM; + return ERR_PTR(-ENOMEM);
if (msg_type == NFT_MSG_NEWFLOWTABLE) nft_activate_next(ctx->net, flowtable); @@ -701,22 +702,22 @@ static int nft_trans_flowtable_add(struct nft_ctx *ctx, int msg_type, nft_trans_flowtable(trans) = flowtable; nft_trans_commit_list_add_tail(ctx->net, trans);
- return 0; + return trans; }
static int nft_delflowtable(struct nft_ctx *ctx, struct nft_flowtable *flowtable) { - int err; + struct nft_trans *trans;
- err = nft_trans_flowtable_add(ctx, NFT_MSG_DELFLOWTABLE, flowtable); - if (err < 0) - return err; + trans = nft_trans_flowtable_add(ctx, NFT_MSG_DELFLOWTABLE, flowtable); + if (IS_ERR(trans)) + return PTR_ERR(trans);
nft_deactivate_next(ctx->net, flowtable); nft_use_dec(&ctx->table->use);
- return err; + return 0; }
static void __nft_reg_track_clobber(struct nft_regs_track *track, u8 dreg) @@ -2504,19 +2505,15 @@ static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, RCU_INIT_POINTER(chain->blob_gen_0, blob); RCU_INIT_POINTER(chain->blob_gen_1, blob);
- err = nf_tables_register_hook(net, table, chain); - if (err < 0) - goto err_destroy_chain; - if (!nft_use_inc(&table->use)) { err = -EMFILE; - goto err_use; + goto err_destroy_chain; }
trans = nft_trans_chain_add(ctx, NFT_MSG_NEWCHAIN); if (IS_ERR(trans)) { err = PTR_ERR(trans); - goto err_unregister_hook; + goto err_trans; }
nft_trans_chain_policy(trans) = NFT_CHAIN_POLICY_UNSET; @@ -2524,17 +2521,22 @@ static int nf_tables_addchain(struct nft_ctx *ctx, u8 family, u8 genmask, nft_trans_chain_policy(trans) = policy;
err = nft_chain_add(table, chain); - if (err < 0) { - nft_trans_destroy(trans); - goto err_unregister_hook; - } + if (err < 0) + goto err_chain_add; + + /* This must be LAST to ensure no packets are walking over this chain. */ + err = nf_tables_register_hook(net, table, chain); + if (err < 0) + goto err_register_hook;
return 0;
-err_unregister_hook: +err_register_hook: + nft_chain_del(chain); +err_chain_add: + nft_trans_destroy(trans); +err_trans: nft_use_dec_restore(&table->use); -err_use: - nf_tables_unregister_hook(net, table, chain); err_destroy_chain: nf_tables_chain_destroy(ctx);
@@ -8373,9 +8375,9 @@ static int nf_tables_newflowtable(struct sk_buff *skb, u8 family = info->nfmsg->nfgen_family; const struct nf_flowtable_type *type; struct nft_flowtable *flowtable; - struct nft_hook *hook, *next; struct net *net = info->net; struct nft_table *table; + struct nft_trans *trans; struct nft_ctx ctx; int err;
@@ -8455,34 +8457,34 @@ static int nf_tables_newflowtable(struct sk_buff *skb, err = nft_flowtable_parse_hook(&ctx, nla, &flowtable_hook, flowtable, extack, true); if (err < 0) - goto err4; + goto err_flowtable_parse_hooks;
list_splice(&flowtable_hook.list, &flowtable->hook_list); flowtable->data.priority = flowtable_hook.priority; flowtable->hooknum = flowtable_hook.num;
+ trans = nft_trans_flowtable_add(&ctx, NFT_MSG_NEWFLOWTABLE, flowtable); + if (IS_ERR(trans)) { + err = PTR_ERR(trans); + goto err_flowtable_trans; + } + + /* This must be LAST to ensure no packets are walking over this flowtable. */ err = nft_register_flowtable_net_hooks(ctx.net, table, &flowtable->hook_list, flowtable); - if (err < 0) { - nft_hooks_destroy(&flowtable->hook_list); - goto err4; - } - - err = nft_trans_flowtable_add(&ctx, NFT_MSG_NEWFLOWTABLE, flowtable); if (err < 0) - goto err5; + goto err_flowtable_hooks;
list_add_tail_rcu(&flowtable->list, &table->flowtables);
return 0; -err5: - list_for_each_entry_safe(hook, next, &flowtable->hook_list, list) { - nft_unregister_flowtable_hook(net, flowtable, hook); - list_del_rcu(&hook->list); - kfree_rcu(hook, rcu); - } -err4: + +err_flowtable_hooks: + nft_trans_destroy(trans); +err_flowtable_trans: + nft_hooks_destroy(&flowtable->hook_list); +err_flowtable_parse_hooks: flowtable->data.type->free(&flowtable->data); err3: module_put(type->owner);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Westphal fw@strlen.de
[ Upstream commit 195e5f88c2e48330ba5483e0bad2de3b3fad484f ]
KMSAN reports unitialized variable when registering the hook, reg->hook_ops_type == NF_HOOK_OP_BPF) ~~~~~~~~~~~ undefined
This is a small structure, just use kzalloc to make sure this won't happen again when new fields get added to nf_hook_ops.
Fixes: 7b4b2fa37587 ("netfilter: annotate nf_tables base hook ops") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 6901067d715dc..79e088e6f103e 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2082,7 +2082,7 @@ static struct nft_hook *nft_netdev_hook_alloc(struct net *net, struct nft_hook *hook; int err;
- hook = kmalloc(sizeof(struct nft_hook), GFP_KERNEL_ACCOUNT); + hook = kzalloc(sizeof(struct nft_hook), GFP_KERNEL_ACCOUNT); if (!hook) { err = -ENOMEM; goto err_hook_alloc;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Kerr jk@codeconstruct.com.au
[ Upstream commit 9990889be14288d4f1743e4768222d5032a79c27 ]
We may hold an extra reference on a socket if a tag allocation fails: we optimistically allocate the sk_key, and take a ref there, but do not drop if we end up not using the allocated key.
Ensure we're dropping the sock on this failure by doing a proper unref rather than directly kfree()ing.
Fixes: de8a6b15d965 ("net: mctp: add an explicit reference from a mctp_sk_key to sock") Signed-off-by: Jeremy Kerr jk@codeconstruct.com.au Reviewed-by: Simon Horman horms@kernel.org Link: https://lore.kernel.org/r/ce9b61e44d1cdae7797be0c5e3141baf582d23a0.170798348... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/mctp/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/mctp/route.c b/net/mctp/route.c index 7a47a58aa54b4..6218dcd07e184 100644 --- a/net/mctp/route.c +++ b/net/mctp/route.c @@ -663,7 +663,7 @@ struct mctp_sk_key *mctp_alloc_local_tag(struct mctp_sock *msk, spin_unlock_irqrestore(&mns->keys_lock, flags);
if (!tagbits) { - kfree(key); + mctp_key_unref(key); return ERR_PTR(-EBUSY); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski kuba@kernel.org
[ Upstream commit e4fe082c38cd74a8fa384bc7542cf3edf1cb7318 ]
There is one common error handler in ynl - ynl_cb_error(). It expects priv to be a pointer to struct ynl_parse_arg AKA yarg. To avoid potential crashes if we encounter a stray NLMSG_ERROR always pass yarg as priv (or a struct which has it as the first member).
ynl_cb_null() has a similar problem directly - it expects yarg but priv passed by the caller is ys.
Found by code inspection.
Fixes: 86878f14d71a ("tools: ynl: user space helpers") Acked-by: Nicolas Dichtel nicolas.dichtel@6wind.com Link: https://lore.kernel.org/r/20240220161112.2735195-2-kuba@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/net/ynl/lib/ynl.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/tools/net/ynl/lib/ynl.c b/tools/net/ynl/lib/ynl.c index 830d25097009a..65975a8306738 100644 --- a/tools/net/ynl/lib/ynl.c +++ b/tools/net/ynl/lib/ynl.c @@ -462,6 +462,8 @@ ynl_gemsg_start_dump(struct ynl_sock *ys, __u32 id, __u8 cmd, __u8 version)
int ynl_recv_ack(struct ynl_sock *ys, int ret) { + struct ynl_parse_arg yarg = { .ys = ys, }; + if (!ret) { yerr(ys, YNL_ERROR_EXPECT_ACK, "Expecting an ACK but nothing received"); @@ -474,7 +476,7 @@ int ynl_recv_ack(struct ynl_sock *ys, int ret) return ret; } return mnl_cb_run(ys->rx_buf, ret, ys->seq, ys->portid, - ynl_cb_null, ys); + ynl_cb_null, &yarg); }
int ynl_cb_null(const struct nlmsghdr *nlh, void *data) @@ -737,11 +739,14 @@ static int ynl_ntf_parse(struct ynl_sock *ys, const struct nlmsghdr *nlh)
static int ynl_ntf_trampoline(const struct nlmsghdr *nlh, void *data) { - return ynl_ntf_parse((struct ynl_sock *)data, nlh); + struct ynl_parse_arg *yarg = data; + + return ynl_ntf_parse(yarg->ys, nlh); }
int ynl_ntf_check(struct ynl_sock *ys) { + struct ynl_parse_arg yarg = { .ys = ys, }; ssize_t len; int err;
@@ -763,7 +768,7 @@ int ynl_ntf_check(struct ynl_sock *ys) return len;
err = mnl_cb_run2(ys->rx_buf, len, ys->seq, ys->portid, - ynl_ntf_trampoline, ys, + ynl_ntf_trampoline, &yarg, ynl_cb_array, NLMSG_MIN_TYPE); if (err < 0) return err;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jakub Kicinski kuba@kernel.org
[ Upstream commit 5d78b73e851455d525a064f3b042b29fdc0c1a4a ]
Make sure to free the already-parsed mcast_groups if we don't get an ack from the kernel when reading family info. This is part of the ynl_sock_create() error path, so we won't get a call to ynl_sock_destroy() to free them later.
Fixes: 86878f14d71a ("tools: ynl: user space helpers") Acked-by: Nicolas Dichtel nicolas.dichtel@6wind.com Link: https://lore.kernel.org/r/20240220161112.2735195-3-kuba@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/net/ynl/lib/ynl.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/tools/net/ynl/lib/ynl.c b/tools/net/ynl/lib/ynl.c index 65975a8306738..591f5f50ddaab 100644 --- a/tools/net/ynl/lib/ynl.c +++ b/tools/net/ynl/lib/ynl.c @@ -584,7 +584,13 @@ static int ynl_sock_read_family(struct ynl_sock *ys, const char *family_name) return err; }
- return ynl_recv_ack(ys, err); + err = ynl_recv_ack(ys, err); + if (err < 0) { + free(ys->mcast_groups); + return err; + } + + return 0; }
struct ynl_sock *
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiri Pirko jiri@nvidia.com
[ Upstream commit 61c43780e9444123410cd48c2483e01d2b8f75e8 ]
Unlike other commands, due to a c&p error, port dump fills-up cmd with wrong value, different from port-get request cmd, port-get doit reply and port notification.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares about this cmd value. Only ynl, for which, this is actually a fix, as it expects doit and dumpit ops rsp_value to be the same.
Omit the fixes tag, even thought this is fix, better to target this for next release.
Fixes: bfcd3a466172 ("Introduce devlink infrastructure") Signed-off-by: Jiri Pirko jiri@nvidia.com Reviewed-by: Simon Horman horms@kernel.org Reviewed-by: Jakub Kicinski kuba@kernel.org Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/devlink/port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/devlink/port.c b/net/devlink/port.c index 841a3eafa328e..d39ee6053cc7b 100644 --- a/net/devlink/port.c +++ b/net/devlink/port.c @@ -581,7 +581,7 @@ devlink_nl_port_get_dump_one(struct sk_buff *msg, struct devlink *devlink,
xa_for_each_start(&devlink->ports, port_index, devlink_port, state->idx) { err = devlink_nl_port_fill(msg, devlink_port, - DEVLINK_CMD_NEW, + DEVLINK_CMD_PORT_NEW, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, flags, cb->extack);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jianbo Liu jianbol@nvidia.com
[ Upstream commit 1fde0ca3a0de7e9f917668941156959dd5e9108b ]
As IDR can't protect itself from the concurrent modification, place idr_remove() under the protection of tp->lock.
Fixes: 08a0063df3ae ("net/sched: flower: Move filter handle initialization earlier") Signed-off-by: Jianbo Liu jianbol@nvidia.com Reviewed-by: Cosmin Ratiu cratiu@nvidia.com Reviewed-by: Gal Pressman gal@nvidia.com Reviewed-by: Jiri Pirko jiri@nvidia.com Acked-by: Jamal Hadi Salim jhs@mojatatu.com Link: https://lore.kernel.org/r/20240220085928.9161-1-jianbol@nvidia.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/cls_flower.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c index efb9d2811b73d..6ee7064c82fcc 100644 --- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -2460,8 +2460,11 @@ static int fl_change(struct net *net, struct sk_buff *in_skb, }
errout_idr: - if (!fold) + if (!fold) { + spin_lock(&tp->lock); idr_remove(&head->handle_idr, fnew->handle); + spin_unlock(&tp->lock); + } __fl_put(fnew); errout_tb: kfree(tb);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Horatiu Vultur horatiu.vultur@microchip.com
[ Upstream commit 603ead96582d85903baec2d55f021b8dac5c25d2 ]
Both registers used when doing manual injection or fdma injection are shared between all the net devices of the switch. It was noticed that when having two process which each of them trying to inject frames on different ethernet ports, that the HW started to behave strange, by sending out more frames then expected. When doing fdma injection it is required to set the frame in the DCB and then make sure that the next pointer of the last DCB is invalid. But because there is no locks for this, then easily this pointer between the DCB can be broken and then it would create a loop of DCBs. And that means that the HW will continuously transmit these frames in a loop. Until the SW will break this loop. Therefore to fix this issue, add a spin lock for when accessing the registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur horatiu.vultur@microchip.com Reviewed-by: Daniel Machon daniel.machon@microchip.com Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/sparx5/sparx5_main.c | 1 + drivers/net/ethernet/microchip/sparx5/sparx5_main.h | 1 + drivers/net/ethernet/microchip/sparx5/sparx5_packet.c | 2 ++ 3 files changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c index d1f7fc8b1b71a..3c066b62e6894 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c @@ -757,6 +757,7 @@ static int mchp_sparx5_probe(struct platform_device *pdev) platform_set_drvdata(pdev, sparx5); sparx5->pdev = pdev; sparx5->dev = &pdev->dev; + spin_lock_init(&sparx5->tx_lock);
/* Do switch core reset if available */ reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch"); diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h index 6f565c0c0c3dc..316fed5f27355 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h @@ -280,6 +280,7 @@ struct sparx5 { int xtr_irq; /* Frame DMA */ int fdma_irq; + spinlock_t tx_lock; /* lock for frame transmission */ struct sparx5_rx rx; struct sparx5_tx tx; /* PTP */ diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c index 6db6ac6a3bbc2..ac7e1cffbcecf 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_packet.c @@ -244,10 +244,12 @@ netdev_tx_t sparx5_port_xmit_impl(struct sk_buff *skb, struct net_device *dev) }
skb_tx_timestamp(skb); + spin_lock(&sparx5->tx_lock); if (sparx5->fdma_irq > 0) ret = sparx5_fdma_xmit(sparx5, ifh, skb); else ret = sparx5_inject(sparx5, ifh, skb, dev); + spin_unlock(&sparx5->tx_lock);
if (ret == -EBUSY) goto busy;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rémi Denis-Courmont courmisch@gmail.com
[ Upstream commit 3b2d9bc4d4acdf15a876eae2c0d83149250e85ba ]
The receive queue is protected by its embedded spin-lock, not the socket lock, so we need the former lock here (and only that one).
Fixes: 107d0d9b8d9a ("Phonet: Phonet datagram transport protocol") Reported-by: Luosili rootlab@huawei.com Signed-off-by: Rémi Denis-Courmont courmisch@gmail.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20240218081214.4806-1-remi@remlab.net Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/phonet/datagram.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c index 3aa50dc7535b7..976fe250b5095 100644 --- a/net/phonet/datagram.c +++ b/net/phonet/datagram.c @@ -34,10 +34,10 @@ static int pn_ioctl(struct sock *sk, int cmd, int *karg)
switch (cmd) { case SIOCINQ: - lock_sock(sk); + spin_lock_bh(&sk->sk_receive_queue.lock); skb = skb_peek(&sk->sk_receive_queue); *karg = skb ? skb->len : 0; - release_sock(sk); + spin_unlock_bh(&sk->sk_receive_queue.lock); return 0;
case SIOCPNADDRESOURCE:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rémi Denis-Courmont courmisch@gmail.com
[ Upstream commit 7d2a894d7f487dcb894df023e9d3014cf5b93fe5 ]
The receive queues are protected by their respective spin-lock, not the socket lock. This could lead to skb_peek() unexpectedly returning NULL or a pointer to an already dequeued socket buffer.
Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol") Signed-off-by: Rémi Denis-Courmont courmisch@gmail.com Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.net Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/phonet/pep.c | 41 ++++++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 9 deletions(-)
diff --git a/net/phonet/pep.c b/net/phonet/pep.c index faba31f2eff29..3dd5f52bc1b58 100644 --- a/net/phonet/pep.c +++ b/net/phonet/pep.c @@ -917,6 +917,37 @@ static int pep_sock_enable(struct sock *sk, struct sockaddr *addr, int len) return 0; }
+static unsigned int pep_first_packet_length(struct sock *sk) +{ + struct pep_sock *pn = pep_sk(sk); + struct sk_buff_head *q; + struct sk_buff *skb; + unsigned int len = 0; + bool found = false; + + if (sock_flag(sk, SOCK_URGINLINE)) { + q = &pn->ctrlreq_queue; + spin_lock_bh(&q->lock); + skb = skb_peek(q); + if (skb) { + len = skb->len; + found = true; + } + spin_unlock_bh(&q->lock); + } + + if (likely(!found)) { + q = &sk->sk_receive_queue; + spin_lock_bh(&q->lock); + skb = skb_peek(q); + if (skb) + len = skb->len; + spin_unlock_bh(&q->lock); + } + + return len; +} + static int pep_ioctl(struct sock *sk, int cmd, int *karg) { struct pep_sock *pn = pep_sk(sk); @@ -929,15 +960,7 @@ static int pep_ioctl(struct sock *sk, int cmd, int *karg) break; }
- lock_sock(sk); - if (sock_flag(sk, SOCK_URGINLINE) && - !skb_queue_empty(&pn->ctrlreq_queue)) - *karg = skb_peek(&pn->ctrlreq_queue)->len; - else if (!skb_queue_empty(&sk->sk_receive_queue)) - *karg = skb_peek(&sk->sk_receive_queue)->len; - else - *karg = 0; - release_sock(sk); + *karg = pep_first_packet_length(sk); ret = 0; break;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Justin Iurman justin.iurman@uliege.be
[ Upstream commit f198d933c2e4f8f89e0620fbaf1ea7eac384a0eb ]
ioam6_fill_trace_data() writes inside the skb payload without ensuring it's writeable (e.g., not cloned). This function is called both from the input and output path. The output path (ioam6_iptunnel) already does the check. This commit provides a fix for the input path, inside ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network header pointer ("nh") when returning from ipv6_hop_ioam().
Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Reported-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Justin Iurman justin.iurman@uliege.be Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/exthdrs.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index 4952ae7924505..02e9ffb63af19 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -177,6 +177,8 @@ static bool ip6_parse_tlv(bool hopbyhop, case IPV6_TLV_IOAM: if (!ipv6_hop_ioam(skb, off)) return false; + + nh = skb_network_header(skb); break; case IPV6_TLV_JUMBO: if (!ipv6_hop_jumbo(skb, off)) @@ -943,6 +945,14 @@ static bool ipv6_hop_ioam(struct sk_buff *skb, int optoff) if (!skb_valid_dst(skb)) ip6_route_input(skb);
+ /* About to mangle packet header */ + if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) + goto drop; + + /* Trace pointer may have changed */ + trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + + optoff + sizeof(*hdr)); + ioam6_fill_trace_data(skb, ns, trace, true); break; default:
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Siddharth Vadapalli s-vadapalli@ti.com
[ Upstream commit 3489182b11d35f1944c1245fc9c4867cf622c50f ]
Commit bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.
While that commit indicated that the RTL8211F_PHYCR2 register is not supported by the "VD-CG" PHY model and therefore updated the corresponding section in rtl8211f_config_init() to be invoked conditionally, the call to "genphy_soft_reset()" was left as-is, when it should have also been invoked conditionally. This is because the call to "genphy_soft_reset()" was first introduced by the commit 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY reset should be issued after setting bits in the PHYCR2 register.
As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the rtl8211f_config_init() function by invoking "genphy_soft_reset()" conditionally based on the presence of the "PHYCR2" register.
Fixes: bb726b753f75 ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG") Signed-off-by: Siddharth Vadapalli s-vadapalli@ti.com Reviewed-by: Simon Horman horms@kernel.org Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/realtek.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 894172a3e15fe..337899c69738e 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -421,9 +421,11 @@ static int rtl8211f_config_init(struct phy_device *phydev) ERR_PTR(ret)); return ret; } + + return genphy_soft_reset(phydev); }
- return genphy_soft_reset(phydev); + return 0; }
static int rtl821x_suspend(struct phy_device *phydev)
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Kurzinger ekurzinger@nvidia.com
[ Upstream commit 3c43177ffb54ea5be97505eb8e2690e99ac96bc9 ]
When waiting for a syncobj timeline point whose fence has not yet been submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using drm_syncobj_fence_add_wait and the thread is put to sleep until the timeout expires. If the fence is submitted before then, drm_syncobj_add_point will wake up the sleeping thread immediately which will proceed to wait for the fence to be signaled.
However, if the WAIT_AVAILABLE flag is used instead, drm_syncobj_fence_add_wait won't get called, meaning the waiting thread will always sleep for the full timeout duration, even if the fence gets submitted earlier. If it turns out that the fence *has* been submitted by the time it eventually wakes up, it will still indicate to userspace that the wait completed successfully (it won't return -ETIME), but it will have taken much longer than it should have.
To fix this, we must call drm_syncobj_fence_add_wait if *either* the WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only difference being that with WAIT_FOR_SUBMIT we will also wait for the fence to be signaled after it has been submitted while with WAIT_AVAILABLE we will return immediately.
IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html
v1 -> v2: adjust lockdep_assert_none_held_once condition
(cherry picked from commit 8c44ea81634a4a337df70a32621a5f3791be23df)
Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by: Erik Kurzinger ekurzinger@nvidia.com Signed-off-by: Simon Ser contact@emersion.fr Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch Reviewed-by: Simon Ser contact@emersion.fr Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurz... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_syncobj.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c index 01da6789d0440..b3433265be6ab 100644 --- a/drivers/gpu/drm/drm_syncobj.c +++ b/drivers/gpu/drm/drm_syncobj.c @@ -1034,7 +1034,8 @@ static signed long drm_syncobj_array_wait_timeout(struct drm_syncobj **syncobjs, uint64_t *points; uint32_t signaled_count, i;
- if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT) + if (flags & (DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT | + DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE)) lockdep_assert_none_held_once();
points = kmalloc_array(count, sizeof(*points), GFP_KERNEL); @@ -1103,7 +1104,8 @@ static signed long drm_syncobj_array_wait_timeout(struct drm_syncobj **syncobjs, * fallthough and try a 0 timeout wait! */
- if (flags & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT) { + if (flags & (DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT | + DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE)) { for (i = 0; i < count; ++i) drm_syncobj_fence_add_wait(syncobjs[i], &entries[i]); }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tina Zhang tina.zhang@intel.com
[ Upstream commit 2396046d75d3c0b2cfead852a77efd023f8539dc ]
mm_get_enqcmd_pasid() should be used by architecture code and closely related to learn the PASID value that the x86 ENQCMD operation should use for the mm.
For the moment SMMUv3 uses this without any connection to ENQCMD, it will be cleaned up similar to how the prior patch made VT-d use the PASID argument of set_dev_pasid().
The motivation is to replace mm->pasid with an iommu private data structure that is introduced in a later patch.
Reviewed-by: Lu Baolu baolu.lu@linux.intel.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Tested-by: Nicolin Chen nicolinc@nvidia.com Signed-off-by: Tina Zhang tina.zhang@intel.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Link: https://lore.kernel.org/r/20231027000525.1278806-4-tina.zhang@intel.com Signed-off-by: Joerg Roedel jroedel@suse.de Stable-dep-of: b5bf7778b722 ("iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kernel/traps.c | 2 +- .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 23 ++++++++++++------- drivers/iommu/iommu-sva.c | 2 +- include/linux/iommu.h | 12 ++++++++++ 4 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index c876f1d36a81a..832f4413d96a8 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -591,7 +591,7 @@ static bool try_fixup_enqcmd_gp(void) if (!mm_valid_pasid(current->mm)) return false;
- pasid = current->mm->pasid; + pasid = mm_get_enqcmd_pasid(current->mm);
/* * Did this thread already have its PASID activated? diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c index 353248ab18e76..05722121f00e7 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c @@ -246,7 +246,8 @@ static void arm_smmu_mm_arch_invalidate_secondary_tlbs(struct mmu_notifier *mn, smmu_domain); }
- arm_smmu_atc_inv_domain(smmu_domain, mm->pasid, start, size); + arm_smmu_atc_inv_domain(smmu_domain, mm_get_enqcmd_pasid(mm), start, + size); }
static void arm_smmu_mm_release(struct mmu_notifier *mn, struct mm_struct *mm) @@ -264,10 +265,11 @@ static void arm_smmu_mm_release(struct mmu_notifier *mn, struct mm_struct *mm) * DMA may still be running. Keep the cd valid to avoid C_BAD_CD events, * but disable translation. */ - arm_smmu_update_ctx_desc_devices(smmu_domain, mm->pasid, &quiet_cd); + arm_smmu_update_ctx_desc_devices(smmu_domain, mm_get_enqcmd_pasid(mm), + &quiet_cd);
arm_smmu_tlb_inv_asid(smmu_domain->smmu, smmu_mn->cd->asid); - arm_smmu_atc_inv_domain(smmu_domain, mm->pasid, 0, 0); + arm_smmu_atc_inv_domain(smmu_domain, mm_get_enqcmd_pasid(mm), 0, 0);
smmu_mn->cleared = true; mutex_unlock(&sva_lock); @@ -325,10 +327,13 @@ arm_smmu_mmu_notifier_get(struct arm_smmu_domain *smmu_domain,
spin_lock_irqsave(&smmu_domain->devices_lock, flags); list_for_each_entry(master, &smmu_domain->devices, domain_head) { - ret = arm_smmu_write_ctx_desc(master, mm->pasid, cd); + ret = arm_smmu_write_ctx_desc(master, mm_get_enqcmd_pasid(mm), + cd); if (ret) { - list_for_each_entry_from_reverse(master, &smmu_domain->devices, domain_head) - arm_smmu_write_ctx_desc(master, mm->pasid, NULL); + list_for_each_entry_from_reverse( + master, &smmu_domain->devices, domain_head) + arm_smmu_write_ctx_desc( + master, mm_get_enqcmd_pasid(mm), NULL); break; } } @@ -358,7 +363,8 @@ static void arm_smmu_mmu_notifier_put(struct arm_smmu_mmu_notifier *smmu_mn)
list_del(&smmu_mn->list);
- arm_smmu_update_ctx_desc_devices(smmu_domain, mm->pasid, NULL); + arm_smmu_update_ctx_desc_devices(smmu_domain, mm_get_enqcmd_pasid(mm), + NULL);
/* * If we went through clear(), we've already invalidated, and no @@ -366,7 +372,8 @@ static void arm_smmu_mmu_notifier_put(struct arm_smmu_mmu_notifier *smmu_mn) */ if (!smmu_mn->cleared) { arm_smmu_tlb_inv_asid(smmu_domain->smmu, cd->asid); - arm_smmu_atc_inv_domain(smmu_domain, mm->pasid, 0, 0); + arm_smmu_atc_inv_domain(smmu_domain, mm_get_enqcmd_pasid(mm), 0, + 0); }
/* Frees smmu_mn */ diff --git a/drivers/iommu/iommu-sva.c b/drivers/iommu/iommu-sva.c index b78671a8a9143..4a2f5699747f1 100644 --- a/drivers/iommu/iommu-sva.c +++ b/drivers/iommu/iommu-sva.c @@ -141,7 +141,7 @@ u32 iommu_sva_get_pasid(struct iommu_sva *handle) { struct iommu_domain *domain = handle->domain;
- return domain->mm->pasid; + return mm_get_enqcmd_pasid(domain->mm); } EXPORT_SYMBOL_GPL(iommu_sva_get_pasid);
diff --git a/include/linux/iommu.h b/include/linux/iommu.h index 6291aa7b079b0..81553770e411a 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -1346,6 +1346,12 @@ static inline bool mm_valid_pasid(struct mm_struct *mm) { return mm->pasid != IOMMU_PASID_INVALID; } + +static inline u32 mm_get_enqcmd_pasid(struct mm_struct *mm) +{ + return mm->pasid; +} + void mm_pasid_drop(struct mm_struct *mm); struct iommu_sva *iommu_sva_bind_device(struct device *dev, struct mm_struct *mm); @@ -1368,6 +1374,12 @@ static inline u32 iommu_sva_get_pasid(struct iommu_sva *handle) } static inline void mm_pasid_init(struct mm_struct *mm) {} static inline bool mm_valid_pasid(struct mm_struct *mm) { return false; } + +static inline u32 mm_get_enqcmd_pasid(struct mm_struct *mm) +{ + return IOMMU_PASID_INVALID; +} + static inline void mm_pasid_drop(struct mm_struct *mm) {} #endif /* CONFIG_IOMMU_SVA */
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe jgg@nvidia.com
[ Upstream commit b5bf7778b722105d7a04b1d51e884497b542638b ]
If the SMMU is configured to use a two level CD table then arm_smmu_write_ctx_desc() allocates a CD table leaf internally using GFP_KERNEL. Due to recent changes this is being done under a spinlock to iterate over the device list - thus it will trigger a sleeping while atomic warning:
arm_smmu_sva_set_dev_pasid() mutex_lock(&sva_lock); __arm_smmu_sva_bind() arm_smmu_mmu_notifier_get() spin_lock_irqsave() arm_smmu_write_ctx_desc() arm_smmu_get_cd_ptr() arm_smmu_alloc_cd_leaf_table() dmam_alloc_coherent(GFP_KERNEL)
This is a 64K high order allocation and really should not be done atomically.
At the moment the rework of the SVA to follow the new API is half finished. Recently the CD table memory was moved from the domain to the master, however we have the confusing situation where the SVA code is wrongly using the RID domains device's list to track which CD tables the SVA is installed in.
Remove the logic to replicate the CD across all the domain's masters during attach. We know which master and which CD table the PASID should be installed in.
Right now SVA only works when dma-iommu.c is in control of the RID translation, which means we have a single iommu_domain shared across the entire group and that iommu_domain is not shared outside the group.
Critically this means that the iommu_group->devices list and RID's smmu_domain->devices list describe the same set of masters.
For PCI cases the core code also insists on singleton groups so there is only one entry in the smmu_domain->devices list that is equal to the master being passed in to arm_smmu_sva_set_dev_pasid().
Only non-PCI cases may have multi-device groups. However, the core code will repeat the calls to arm_smmu_sva_set_dev_pasid() across the entire iommu_group->devices list.
Instead of having arm_smmu_mmu_notifier_get() indirectly loop over all the devices in the group via the RID's smmu_domain, rely on __arm_smmu_sva_bind() to be called for each device in the group and install the repeated CD entry that way.
This avoids taking the spinlock to access the devices list and permits the arm_smmu_write_ctx_desc() to use a sleeping allocation. Leave the arm_smmu_mm_release() as a confusing situation, this requires tracking attached masters inside the SVA domain.
Removing the loop allows arm_smmu_write_ctx_desc() to be called outside the spinlock and thus is safe to use GFP_KERNEL.
Move the clearing of the CD into arm_smmu_sva_remove_dev_pasid() so that arm_smmu_mmu_notifier_get/put() remain paired functions.
Fixes: 24503148c545 ("iommu/arm-smmu-v3: Refactor write_ctx_desc") Reported-by: Dan Carpenter dan.carpenter@linaro.org Closes: https://lore.kernel.org/all/4e25d161-0cf8-4050-9aa3-dfa21cd63e56@moroto.moun... Signed-off-by: Jason Gunthorpe jgg@nvidia.com Reviewed-by: Michael Shavit mshavit@google.com Link: https://lore.kernel.org/r/0-v3-11978fc67151+112-smmu_cd_atomic_jgg@nvidia.co... Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 38 ++++++------------- 1 file changed, 12 insertions(+), 26 deletions(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c index 05722121f00e7..4a27fbdb2d844 100644 --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c @@ -292,10 +292,8 @@ arm_smmu_mmu_notifier_get(struct arm_smmu_domain *smmu_domain, struct mm_struct *mm) { int ret; - unsigned long flags; struct arm_smmu_ctx_desc *cd; struct arm_smmu_mmu_notifier *smmu_mn; - struct arm_smmu_master *master;
list_for_each_entry(smmu_mn, &smmu_domain->mmu_notifiers, list) { if (smmu_mn->mn.mm == mm) { @@ -325,28 +323,9 @@ arm_smmu_mmu_notifier_get(struct arm_smmu_domain *smmu_domain, goto err_free_cd; }
- spin_lock_irqsave(&smmu_domain->devices_lock, flags); - list_for_each_entry(master, &smmu_domain->devices, domain_head) { - ret = arm_smmu_write_ctx_desc(master, mm_get_enqcmd_pasid(mm), - cd); - if (ret) { - list_for_each_entry_from_reverse( - master, &smmu_domain->devices, domain_head) - arm_smmu_write_ctx_desc( - master, mm_get_enqcmd_pasid(mm), NULL); - break; - } - } - spin_unlock_irqrestore(&smmu_domain->devices_lock, flags); - if (ret) - goto err_put_notifier; - list_add(&smmu_mn->list, &smmu_domain->mmu_notifiers); return smmu_mn;
-err_put_notifier: - /* Frees smmu_mn */ - mmu_notifier_put(&smmu_mn->mn); err_free_cd: arm_smmu_free_shared_cd(cd); return ERR_PTR(ret); @@ -363,9 +342,6 @@ static void arm_smmu_mmu_notifier_put(struct arm_smmu_mmu_notifier *smmu_mn)
list_del(&smmu_mn->list);
- arm_smmu_update_ctx_desc_devices(smmu_domain, mm_get_enqcmd_pasid(mm), - NULL); - /* * If we went through clear(), we've already invalidated, and no * new TLB entry can have been formed. @@ -381,7 +357,8 @@ static void arm_smmu_mmu_notifier_put(struct arm_smmu_mmu_notifier *smmu_mn) arm_smmu_free_shared_cd(cd); }
-static int __arm_smmu_sva_bind(struct device *dev, struct mm_struct *mm) +static int __arm_smmu_sva_bind(struct device *dev, ioasid_t pasid, + struct mm_struct *mm) { int ret; struct arm_smmu_bond *bond; @@ -404,9 +381,15 @@ static int __arm_smmu_sva_bind(struct device *dev, struct mm_struct *mm) goto err_free_bond; }
+ ret = arm_smmu_write_ctx_desc(master, pasid, bond->smmu_mn->cd); + if (ret) + goto err_put_notifier; + list_add(&bond->list, &master->bonds); return 0;
+err_put_notifier: + arm_smmu_mmu_notifier_put(bond->smmu_mn); err_free_bond: kfree(bond); return ret; @@ -568,6 +551,9 @@ void arm_smmu_sva_remove_dev_pasid(struct iommu_domain *domain, struct arm_smmu_master *master = dev_iommu_priv_get(dev);
mutex_lock(&sva_lock); + + arm_smmu_write_ctx_desc(master, id, NULL); + list_for_each_entry(t, &master->bonds, list) { if (t->mm == mm) { bond = t; @@ -590,7 +576,7 @@ static int arm_smmu_sva_set_dev_pasid(struct iommu_domain *domain, struct mm_struct *mm = domain->mm;
mutex_lock(&sva_lock); - ret = __arm_smmu_sva_bind(dev, mm); + ret = __arm_smmu_sva_bind(dev, id, mm); mutex_unlock(&sva_lock);
return ret;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erik Kurzinger ekurzinger@nvidia.com
[ Upstream commit 2aa6f5b0fd052e363bb9d4b547189f0bf6b3d6d3 ]
During syncobj_eventfd_entry_func, dma_fence_chain_find_seqno may set the fence to NULL if the given seqno is signaled and a later seqno has already been submitted. In that case, the eventfd should be signaled immediately which currently does not happen.
This is a similar issue to the one addressed by commit b19926d4f3a6 ("drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.").
As a fix, if the return value of dma_fence_chain_find_seqno indicates success but it sets the fence to NULL, we will assign a stub fence to ensure the following code still signals the eventfd.
v1 -> v2: assign a stub fence instead of signaling the eventfd
Signed-off-by: Erik Kurzinger ekurzinger@nvidia.com Fixes: c7a472297169 ("drm/syncobj: add IOCTL to register an eventfd") Signed-off-by: Simon Ser contact@emersion.fr Link: https://patchwork.freedesktop.org/patch/msgid/20240221184527.37667-1-ekurzin... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_syncobj.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c index b3433265be6ab..5860428da8de8 100644 --- a/drivers/gpu/drm/drm_syncobj.c +++ b/drivers/gpu/drm/drm_syncobj.c @@ -1380,10 +1380,21 @@ syncobj_eventfd_entry_func(struct drm_syncobj *syncobj,
/* This happens inside the syncobj lock */ fence = dma_fence_get(rcu_dereference_protected(syncobj->fence, 1)); + if (!fence) + return; + ret = dma_fence_chain_find_seqno(&fence, entry->point); - if (ret != 0 || !fence) { + if (ret != 0) { + /* The given seqno has not been submitted yet. */ dma_fence_put(fence); return; + } else if (!fence) { + /* If dma_fence_chain_find_seqno returns 0 but sets the fence + * to NULL, it implies that the given seqno is signaled and a + * later seqno has already been submitted. Assign a stub fence + * so that the eventfd still gets signaled below. + */ + fence = dma_fence_get_stub(); }
list_del_init(&entry->node);
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Muhammad Usama Anjum usama.anjum@collabora.com
[ Upstream commit 510325e5ac5f45c1180189d3bfc108c54bf64544 ]
The config fragment doesn't follow the correct format to enable those config options which make the config options getting missed while merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config Using .config as base Merging tools/testing/selftests/iommu/config ➜ make olddefconfig .config:5295:warning: unexpected data: CONFIG_IOMMUFD .config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706fe ("iommufd: Add a selftest") Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum usama.anjum@collabora.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/iommu/config | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/iommu/config b/tools/testing/selftests/iommu/config index 6c4f901d6fed3..110d73917615d 100644 --- a/tools/testing/selftests/iommu/config +++ b/tools/testing/selftests/iommu/config @@ -1,2 +1,3 @@ -CONFIG_IOMMUFD -CONFIG_IOMMUFD_TEST +CONFIG_IOMMUFD=y +CONFIG_FAULT_INJECTION=y +CONFIG_IOMMUFD_TEST=y
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Srinivasan Shanmugam srinivasan.shanmugam@amd.com
[ Upstream commit d2b48f340d9e4a8fbeb1cdc84cd8da6ad143a907 ]
Fixes potential null pointer dereference warnings in the dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up() functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced before it was checked for null. This could lead to a null pointer dereference if 'dc_dmub_srv' is null. The fix is to check if 'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the functions to ensure that 'dc_dmub_srv' is not null when it is dereferenced.
Found by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128) drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac583449 ("drm/amd/display: decouple dmcub execution to reduce lock granularity") Fixes: 65138eb72e1f ("drm/amd/display: Add DCN35 DMUB") Cc: JinZe.Xu jinze.xu@amd.com Cc: Hersen Wu hersenxs.wu@amd.com Cc: Josip Pavic josip.pavic@amd.com Cc: Roman Li roman.li@amd.com Cc: Qingqing Zhuo Qingqing.Zhuo@amd.com Cc: Harry Wentland Harry.Wentland@amd.com Cc: Rodrigo Siqueira Rodrigo.Siqueira@amd.com Cc: Aurabindo Pillai aurabindo.pillai@amd.com Cc: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Srinivasan Shanmugam srinivasan.shanmugam@amd.com Reviewed-by: Tom Chung chiahsuan.chung@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c index 61d1b4eadbee3..05b3433cbb0b4 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c +++ b/drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c @@ -124,7 +124,7 @@ bool dc_dmub_srv_cmd_list_queue_execute(struct dc_dmub_srv *dc_dmub_srv, unsigned int count, union dmub_rb_cmd *cmd_list) { - struct dc_context *dc_ctx = dc_dmub_srv->ctx; + struct dc_context *dc_ctx; struct dmub_srv *dmub; enum dmub_status status; int i; @@ -132,6 +132,7 @@ bool dc_dmub_srv_cmd_list_queue_execute(struct dc_dmub_srv *dc_dmub_srv, if (!dc_dmub_srv || !dc_dmub_srv->dmub) return false;
+ dc_ctx = dc_dmub_srv->ctx; dmub = dc_dmub_srv->dmub;
for (i = 0 ; i < count; i++) { @@ -1129,7 +1130,7 @@ void dc_dmub_srv_subvp_save_surf_addr(const struct dc_dmub_srv *dc_dmub_srv, con
bool dc_dmub_srv_is_hw_pwr_up(struct dc_dmub_srv *dc_dmub_srv, bool wait) { - struct dc_context *dc_ctx = dc_dmub_srv->ctx; + struct dc_context *dc_ctx; enum dmub_status status;
if (!dc_dmub_srv || !dc_dmub_srv->dmub) @@ -1138,6 +1139,8 @@ bool dc_dmub_srv_is_hw_pwr_up(struct dc_dmub_srv *dc_dmub_srv, bool wait) if (dc_dmub_srv->ctx->dc->debug.dmcub_emulation) return true;
+ dc_ctx = dc_dmub_srv->ctx; + if (wait) { status = dmub_srv_wait_for_hw_pwr_up(dc_dmub_srv->dmub, 500000); if (status != DMUB_STATUS_OK) {
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Armin Wolf W_Armin@gmx.de
[ Upstream commit bae67893578d608e35691dcdfa90c4957debf1d3 ]
After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak:
unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300
Fix this by freeing dmub_srv after destroying it.
Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf W_Armin@gmx.de Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d83c4128fa165..88ca985603de5 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -2245,6 +2245,7 @@ static int dm_sw_fini(void *handle)
if (adev->dm.dmub_srv) { dmub_srv_destroy(adev->dm.dmub_srv); + kfree(adev->dm.dmub_srv); adev->dm.dmub_srv = NULL; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Melissa Wen mwen@igalia.com
[ Upstream commit 9671761792156f2339627918bafcd713a8a6f777 ]
Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below:
[ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000 [ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417 [ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001 [ +0.000000] </TASK> [ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco [ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4 [ +0.000000] usb_common crct10dif_common video wmi [ +0.000000] CR2: 00000000000004c0 [ +0.000000] ---[ end trace 0000000000000000 ]---
Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references") Signed-off-by: Melissa Wen mwen@igalia.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 88ca985603de5..272c27495ede6 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6445,10 +6445,15 @@ amdgpu_dm_connector_late_register(struct drm_connector *connector) static void amdgpu_dm_connector_funcs_force(struct drm_connector *connector) { struct amdgpu_dm_connector *aconnector = to_amdgpu_dm_connector(connector); - struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); struct dc_link *dc_link = aconnector->dc_link; struct dc_sink *dc_em_sink = aconnector->dc_em_sink; struct edid *edid; + struct i2c_adapter *ddc; + + if (dc_link->aux_mode) + ddc = &aconnector->dm_dp_aux.aux.ddc; + else + ddc = &aconnector->i2c->base;
/* * Note: drm_get_edid gets edid in the following order: @@ -6456,7 +6461,7 @@ static void amdgpu_dm_connector_funcs_force(struct drm_connector *connector) * 2) firmware EDID if set via edid_firmware module parameter * 3) regular DDC read. */ - edid = drm_get_edid(connector, &amdgpu_connector->ddc_bus->aux.ddc); + edid = drm_get_edid(connector, ddc); if (!edid) { DRM_ERROR("No EDID found on connector: %s.\n", connector->name); return; @@ -6497,12 +6502,18 @@ static int get_modes(struct drm_connector *connector) static void create_eml_sink(struct amdgpu_dm_connector *aconnector) { struct drm_connector *connector = &aconnector->base; - struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(&aconnector->base); + struct dc_link *dc_link = aconnector->dc_link; struct dc_sink_init_data init_params = { .link = aconnector->dc_link, .sink_signal = SIGNAL_TYPE_VIRTUAL }; struct edid *edid; + struct i2c_adapter *ddc; + + if (dc_link->aux_mode) + ddc = &aconnector->dm_dp_aux.aux.ddc; + else + ddc = &aconnector->i2c->base;
/* * Note: drm_get_edid gets edid in the following order: @@ -6510,7 +6521,7 @@ static void create_eml_sink(struct amdgpu_dm_connector *aconnector) * 2) firmware EDID if set via edid_firmware module parameter * 3) regular DDC read. */ - edid = drm_get_edid(connector, &amdgpu_connector->ddc_bus->aux.ddc); + edid = drm_get_edid(connector, ddc); if (!edid) { DRM_ERROR("No EDID found on connector: %s.\n", connector->name); return;
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Corey Minyard minyard@acm.org
[ Upstream commit 87aec499368d488c20292952d6d4be7cb9e49c5e ]
When being a target, NAK from the controller means that all bytes have been transferred. So, the last byte needs also to be marked as 'processed'. Otherwise index registers of backends may not increase.
Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver") Signed-off-by: Corey Minyard minyard@acm.org Tested-by: Andrew Manley andrew.manley@sealingtech.com Reviewed-by: Andrew Manley andrew.manley@sealingtech.com Reviewed-by: Oleksij Rempel o.rempel@pengutronix.de [wsa: fixed comment and commit message to properly describe the case] Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Signed-off-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-imx.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 1775a79aeba2a..0951bfdc89cfa 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -803,6 +803,11 @@ static irqreturn_t i2c_imx_slave_handle(struct imx_i2c_struct *i2c_imx, ctl &= ~I2CR_MTX; imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR); imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); + + /* flag the last byte as processed */ + i2c_imx_slave_event(i2c_imx, + I2C_SLAVE_READ_PROCESSED, &value); + i2c_imx_slave_finish_op(i2c_imx); return IRQ_HANDLED; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yosry Ahmed yosryahmed@google.com
commit e3b63e966cac0bf78aaa1efede1827a252815a1d upstream.
In zswap_writeback_entry(), after we get a folio from __read_swap_cache_async(), we grab the tree lock again to check that the swap entry was not invalidated and recycled. If it was, we delete the folio we just added to the swap cache and exit.
However, __read_swap_cache_async() returns the folio locked when it is newly allocated, which is always true for this path, and the folio is ref'd. Make sure to unlock and put the folio before returning.
This was discovered by code inspection, probably because this path handles a race condition that should not happen often, and the bug would not crash the system, it will only strand the folio indefinitely.
Link: https://lkml.kernel.org/r/20240125085127.1327013-1-yosryahmed@google.com Fixes: 04fc7816089c ("mm: fix zswap writeback race condition") Signed-off-by: Yosry Ahmed yosryahmed@google.com Reviewed-by: Chengming Zhou zhouchengming@bytedance.com Acked-by: Johannes Weiner hannes@cmpxchg.org Reviewed-by: Nhat Pham nphamcs@gmail.com Cc: Domenico Cerasuolo cerasuolodomenico@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Yosry Ahmed yosryahmed@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/zswap.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/mm/zswap.c +++ b/mm/zswap.c @@ -1105,6 +1105,8 @@ static int zswap_writeback_entry(struct if (zswap_rb_search(&tree->rbroot, swp_offset(entry->swpentry)) != entry) { spin_unlock(&tree->lock); delete_from_swap_cache(page_folio(page)); + unlock_page(page); + put_page(page); ret = -ENOMEM; goto fail; }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 31ee4ad86afd6ed6f4bb1b38c43011216080c42a upstream.
Since the "Fixes" commit mentioned below, "userspace pm" subtests of mptcp_join selftests introduced in v6.5 are launching the whole transfer in the background, do the required checks, then wait for the end of transfer.
There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds in slow environments.
Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp: add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait Cc: stable@vger.kernel.org # 6.5.x Reviewed-and-tested-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -3433,7 +3433,7 @@ userspace_tests() chk_rm_nr 1 1 invert chk_mptcp_info subflows 0 subflows 0 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi
# userspace pm create destroy subflow @@ -3452,7 +3452,7 @@ userspace_tests() chk_rm_nr 1 1 chk_mptcp_info subflows 0 subflows 0 kill_events_pids - wait $tests_pid + mptcp_lib_kill_wait $tests_pid fi }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chengming Zhou zhouchengming@bytedance.com
commit 678e54d4bb9a4822f8ae99690ac131c5d490cdb1 upstream.
We have to invalidate any duplicate entry even when !zswap_enabled since zswap can be disabled anytime. If the folio store success before, then got dirtied again but zswap disabled, we won't invalidate the old duplicate entry in the zswap_store(). So later lru writeback may overwrite the new data in swapfile.
Link: https://lkml.kernel.org/r/20240208023254.3873823-1-chengming.zhou@linux.dev Fixes: 42c06a0e8ebe ("mm: kill frontswap") Signed-off-by: Chengming Zhou zhouchengming@bytedance.com Acked-by: Johannes Weiner hannes@cmpxchg.org Cc: Nhat Pham nphamcs@gmail.com Cc: Yosry Ahmed yosryahmed@google.com Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/zswap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
--- a/mm/zswap.c +++ b/mm/zswap.c @@ -1222,7 +1222,7 @@ bool zswap_store(struct folio *folio) if (folio_test_large(folio)) return false;
- if (!zswap_enabled || !tree) + if (!tree) return false;
/* @@ -1238,6 +1238,9 @@ bool zswap_store(struct folio *folio) } spin_unlock(&tree->lock);
+ if (!zswap_enabled) + return false; + /* * XXX: zswap reclaim does not work with cgroups yet. Without a * cgroup-aware entry LRU, we will push out entries system-wide based on
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthieu Baerts (NGI0) matttbe@kernel.org
commit 04b57c9e096a9479fe0ad31e3956e336fa589cb2 upstream.
Since the "Fixes" commits mentioned below, the newly added "userspace pm" subtests of mptcp_join selftests are launching the whole transfer in the background, do the required checks, then wait for the end of transfer.
There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds on slow environments.
While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of on a specific one with 'kill_tests_wait()'.
Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Cc: stable@vger.kernel.org Reviewed-and-tested-by: Geliang Tang geliang@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-)
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -688,13 +688,6 @@ kill_events_pids() mptcp_lib_kill_wait $evts_ns2_pid }
-kill_tests_wait() -{ - #shellcheck disable=SC2046 - kill -SIGUSR1 $(ip netns pids $ns2) $(ip netns pids $ns1) - wait -} - pm_nl_set_limits() { local ns=$1 @@ -3466,7 +3459,8 @@ endpoint_tests() pm_nl_set_limits $ns2 2 2 pm_nl_add_endpoint $ns1 10.0.2.1 flags signal speed=slow \ - run_tests $ns1 $ns2 10.0.1.1 2>/dev/null & + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$!
wait_mpj $ns1 pm_nl_check_endpoint "creation" \ @@ -3481,7 +3475,7 @@ endpoint_tests() pm_nl_add_endpoint $ns2 10.0.2.2 flags signal pm_nl_check_endpoint "modif is allowed" \ $ns2 10.0.2.2 id 1 flags signal - kill_tests_wait + mptcp_lib_kill_wait $tests_pid fi
if reset "delete and re-add" && @@ -3490,7 +3484,8 @@ endpoint_tests() pm_nl_set_limits $ns2 1 1 pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow test_linkfail=4 speed=20 \ - run_tests $ns1 $ns2 10.0.1.1 2>/dev/null & + run_tests $ns1 $ns2 10.0.1.1 & + local tests_pid=$!
wait_mpj $ns2 chk_subflow_nr "before delete" 2 @@ -3505,7 +3500,7 @@ endpoint_tests() wait_mpj $ns2 chk_subflow_nr "after re-add" 2 chk_mptcp_info subflows 1 subflows 1 - kill_tests_wait + mptcp_lib_kill_wait $tests_pid fi }
6.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geliang Tang geliang.tang@suse.com
commit 61c131f5d4d2b79904af2fdcb2839a9db8e7c55c upstream.
To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh.
The helper get_counter() in mptcp_join.sh and get_mib_counter() in mptcp_connect.sh have the same functionality, export get_counter() into mptcp_lib.sh and rename it as mptcp_lib_get_counter(). Use this new helper instead of get_counter() and get_mib_counter().
Use this helper in test_prio() in userspace_pm.sh too instead of open-coding.
Reviewed-by: Matthieu Baerts matttbe@kernel.org Signed-off-by: Geliang Tang geliang.tang@suse.com Signed-off-by: Mat Martineau martineau@kernel.org Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-11-8d6b94150f6b@... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Matthieu Baerts (NGI0) matttbe@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 41 +++------ tools/testing/selftests/net/mptcp/mptcp_join.sh | 88 ++++++++------------- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 16 +++ tools/testing/selftests/net/mptcp/userspace_pm.sh | 14 +-- 4 files changed, 73 insertions(+), 86 deletions(-)
--- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh @@ -341,21 +341,6 @@ do_ping() return 0 }
-# $1: ns, $2: MIB counter -get_mib_counter() -{ - local listener_ns="${1}" - local mib="${2}" - - # strip the header - ip netns exec "${listener_ns}" \ - nstat -z -a "${mib}" | \ - tail -n+2 | \ - while read a count c rest; do - echo $count - done -} - # $1: ns, $2: port wait_local_port_listen() { @@ -441,12 +426,12 @@ do_transfer() nstat -n fi
- local stat_synrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") - local stat_ackrx_last_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") - local stat_cookietx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent") - local stat_cookierx_last=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv") - local stat_csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr") - local stat_csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr") + local stat_synrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") + local stat_ackrx_last_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") + local stat_cookietx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent") + local stat_cookierx_last=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv") + local stat_csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr") + local stat_csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
timeout ${timeout_test} \ ip netns exec ${listener_ns} \ @@ -509,11 +494,11 @@ do_transfer() check_transfer $cin $sout "file received by server" rets=$?
- local stat_synrx_now_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") - local stat_ackrx_now_l=$(get_mib_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") - local stat_cookietx_now=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesSent") - local stat_cookierx_now=$(get_mib_counter "${listener_ns}" "TcpExtSyncookiesRecv") - local stat_ooo_now=$(get_mib_counter "${listener_ns}" "TcpExtTCPOFOQueue") + local stat_synrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableSYNRX") + local stat_ackrx_now_l=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtMPCapableACKRX") + local stat_cookietx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesSent") + local stat_cookierx_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtSyncookiesRecv") + local stat_ooo_now=$(mptcp_lib_get_counter "${listener_ns}" "TcpExtTCPOFOQueue")
expect_synrx=$((stat_synrx_last_l)) expect_ackrx=$((stat_ackrx_last_l)) @@ -542,8 +527,8 @@ do_transfer() fi
if $checksum; then - local csum_err_s=$(get_mib_counter "${listener_ns}" "MPTcpExtDataCsumErr") - local csum_err_c=$(get_mib_counter "${connector_ns}" "MPTcpExtDataCsumErr") + local csum_err_s=$(mptcp_lib_get_counter "${listener_ns}" "MPTcpExtDataCsumErr") + local csum_err_c=$(mptcp_lib_get_counter "${connector_ns}" "MPTcpExtDataCsumErr")
local csum_err_s_nr=$((csum_err_s - stat_csum_err_s)) if [ $csum_err_s_nr -gt 0 ]; then --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -611,25 +611,9 @@ wait_local_port_listen() done }
-# $1: ns ; $2: counter -get_counter() -{ - local ns="${1}" - local counter="${2}" - local count - - count=$(ip netns exec ${ns} nstat -asz "${counter}" | awk 'NR==1 {next} {print $2}') - if [ -z "${count}" ]; then - mptcp_lib_fail_if_expected_feature "${counter} counter" - return 1 - fi - - echo "${count}" -} - rm_addr_count() { - get_counter "${1}" "MPTcpExtRmAddr" + mptcp_lib_get_counter "${1}" "MPTcpExtRmAddr" }
# $1: ns, $2: old rm_addr counter in $ns @@ -649,7 +633,7 @@ wait_rm_addr()
rm_sf_count() { - get_counter "${1}" "MPTcpExtRmSubflow" + mptcp_lib_get_counter "${1}" "MPTcpExtRmSubflow" }
# $1: ns, $2: old rm_sf counter in $ns @@ -672,11 +656,11 @@ wait_mpj() local ns="${1}" local cnt old_cnt
- old_cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx") + old_cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx")
local i for i in $(seq 10); do - cnt=$(get_counter ${ns} "MPTcpExtMPJoinAckRx") + cnt=$(mptcp_lib_get_counter ${ns} "MPTcpExtMPJoinAckRx") [ "$cnt" = "${old_cnt}" ] || break sleep 0.1 done @@ -1271,7 +1255,7 @@ chk_csum_nr() fi
print_check "sum" - count=$(get_counter ${ns1} "MPTcpExtDataCsumErr") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns1" ]; then extra_msg="$extra_msg ns1=$count" fi @@ -1284,7 +1268,7 @@ chk_csum_nr() print_ok fi print_check "csum" - count=$(get_counter ${ns2} "MPTcpExtDataCsumErr") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtDataCsumErr") if [ "$count" != "$csum_ns2" ]; then extra_msg="$extra_msg ns2=$count" fi @@ -1328,7 +1312,7 @@ chk_fail_nr() fi
print_check "ftx" - count=$(get_counter ${ns_tx} "MPTcpExtMPFailTx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFailTx") if [ "$count" != "$fail_tx" ]; then extra_msg="$extra_msg,tx=$count" fi @@ -1342,7 +1326,7 @@ chk_fail_nr() fi
print_check "failrx" - count=$(get_counter ${ns_rx} "MPTcpExtMPFailRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFailRx") if [ "$count" != "$fail_rx" ]; then extra_msg="$extra_msg,rx=$count" fi @@ -1375,7 +1359,7 @@ chk_fclose_nr() fi
print_check "ctx" - count=$(get_counter ${ns_tx} "MPTcpExtMPFastcloseTx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPFastcloseTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_tx" ]; then @@ -1386,7 +1370,7 @@ chk_fclose_nr() fi
print_check "fclzrx" - count=$(get_counter ${ns_rx} "MPTcpExtMPFastcloseRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPFastcloseRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$fclose_rx" ]; then @@ -1416,7 +1400,7 @@ chk_rst_nr() fi
print_check "rtx" - count=$(get_counter ${ns_tx} "MPTcpExtMPRstTx") + count=$(mptcp_lib_get_counter ${ns_tx} "MPTcpExtMPRstTx") if [ -z "$count" ]; then print_skip # accept more rst than expected except if we don't expect any @@ -1428,7 +1412,7 @@ chk_rst_nr() fi
print_check "rstrx" - count=$(get_counter ${ns_rx} "MPTcpExtMPRstRx") + count=$(mptcp_lib_get_counter ${ns_rx} "MPTcpExtMPRstRx") if [ -z "$count" ]; then print_skip # accept more rst than expected except if we don't expect any @@ -1449,7 +1433,7 @@ chk_infi_nr() local count
print_check "itx" - count=$(get_counter ${ns2} "MPTcpExtInfiniteMapTx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtInfiniteMapTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$infi_tx" ]; then @@ -1459,7 +1443,7 @@ chk_infi_nr() fi
print_check "infirx" - count=$(get_counter ${ns1} "MPTcpExtInfiniteMapRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtInfiniteMapRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$infi_rx" ]; then @@ -1488,7 +1472,7 @@ chk_join_nr() fi
print_check "syn" - count=$(get_counter ${ns1} "MPTcpExtMPJoinSynRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then @@ -1499,7 +1483,7 @@ chk_join_nr()
print_check "synack" with_cookie=$(ip netns exec $ns2 sysctl -n net.ipv4.tcp_syncookies) - count=$(get_counter ${ns2} "MPTcpExtMPJoinSynAckRx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then @@ -1516,7 +1500,7 @@ chk_join_nr() fi
print_check "ack" - count=$(get_counter ${ns1} "MPTcpExtMPJoinAckRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then @@ -1549,8 +1533,8 @@ chk_stale_nr()
print_check "stale"
- stale_nr=$(get_counter ${ns} "MPTcpExtSubflowStale") - recover_nr=$(get_counter ${ns} "MPTcpExtSubflowRecover") + stale_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowStale") + recover_nr=$(mptcp_lib_get_counter ${ns} "MPTcpExtSubflowRecover") if [ -z "$stale_nr" ] || [ -z "$recover_nr" ]; then print_skip elif [ $stale_nr -lt $stale_min ] || @@ -1587,7 +1571,7 @@ chk_add_nr() timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
print_check "add" - count=$(get_counter ${ns2} "MPTcpExtAddAddr") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtAddAddr") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected @@ -1599,7 +1583,7 @@ chk_add_nr() fi
print_check "echo" - count=$(get_counter ${ns1} "MPTcpExtEchoAdd") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtEchoAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_nr" ]; then @@ -1610,7 +1594,7 @@ chk_add_nr()
if [ $port_nr -gt 0 ]; then print_check "pt" - count=$(get_counter ${ns2} "MPTcpExtPortAdd") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtPortAdd") if [ -z "$count" ]; then print_skip elif [ "$count" != "$port_nr" ]; then @@ -1620,7 +1604,7 @@ chk_add_nr() fi
print_check "syn" - count=$(get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_nr" ]; then @@ -1631,7 +1615,7 @@ chk_add_nr() fi
print_check "synack" - count=$(get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtMPJoinPortSynAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$syn_ack_nr" ]; then @@ -1642,7 +1626,7 @@ chk_add_nr() fi
print_check "ack" - count=$(get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPJoinPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$ack_nr" ]; then @@ -1653,7 +1637,7 @@ chk_add_nr() fi
print_check "syn" - count=$(get_counter ${ns1} "MPTcpExtMismatchPortSynRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortSynRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_syn_nr" ]; then @@ -1664,7 +1648,7 @@ chk_add_nr() fi
print_check "ack" - count=$(get_counter ${ns1} "MPTcpExtMismatchPortAckRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMismatchPortAckRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mis_ack_nr" ]; then @@ -1686,7 +1670,7 @@ chk_add_tx_nr() timeout=$(ip netns exec $ns1 sysctl -n net.mptcp.add_addr_timeout)
print_check "add TX" - count=$(get_counter ${ns1} "MPTcpExtAddAddrTx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtAddAddrTx") if [ -z "$count" ]; then print_skip # if the test configured a short timeout tolerate greater then expected @@ -1698,7 +1682,7 @@ chk_add_tx_nr() fi
print_check "echo TX" - count=$(get_counter ${ns2} "MPTcpExtEchoAddTx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtEchoAddTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$echo_tx_nr" ]; then @@ -1736,7 +1720,7 @@ chk_rm_nr() fi
print_check "rm" - count=$(get_counter ${addr_ns} "MPTcpExtRmAddr") + count=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmAddr") if [ -z "$count" ]; then print_skip elif [ "$count" != "$rm_addr_nr" ]; then @@ -1746,13 +1730,13 @@ chk_rm_nr() fi
print_check "rmsf" - count=$(get_counter ${subflow_ns} "MPTcpExtRmSubflow") + count=$(mptcp_lib_get_counter ${subflow_ns} "MPTcpExtRmSubflow") if [ -z "$count" ]; then print_skip elif [ -n "$simult" ]; then local cnt suffix
- cnt=$(get_counter ${addr_ns} "MPTcpExtRmSubflow") + cnt=$(mptcp_lib_get_counter ${addr_ns} "MPTcpExtRmSubflow")
# in case of simult flush, the subflow removal count on each side is # unreliable @@ -1781,7 +1765,7 @@ chk_rm_tx_nr() local rm_addr_tx_nr=$1
print_check "rm TX" - count=$(get_counter ${ns2} "MPTcpExtRmAddrTx") + count=$(mptcp_lib_get_counter ${ns2} "MPTcpExtRmAddrTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$rm_addr_tx_nr" ]; then @@ -1798,7 +1782,7 @@ chk_prio_nr() local count
print_check "ptx" - count=$(get_counter ${ns1} "MPTcpExtMPPrioTx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioTx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mp_prio_nr_tx" ]; then @@ -1808,7 +1792,7 @@ chk_prio_nr() fi
print_check "prx" - count=$(get_counter ${ns1} "MPTcpExtMPPrioRx") + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtMPPrioRx") if [ -z "$count" ]; then print_skip elif [ "$count" != "$mp_prio_nr_rx" ]; then @@ -1908,7 +1892,7 @@ wait_attempt_fail() while [ $time -lt $timeout_ms ]; do local cnt
- cnt=$(get_counter ${ns} "TcpAttemptFails") + cnt=$(mptcp_lib_get_counter ${ns} "TcpAttemptFails")
[ "$cnt" = 1 ] && return 1 time=$((time + 100)) --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -216,3 +216,19 @@ mptcp_lib_kill_wait() { kill "${1}" > /dev/null 2>&1 wait "${1}" 2>/dev/null } + +# $1: ns, $2: MIB counter +mptcp_lib_get_counter() { + local ns="${1}" + local counter="${2}" + local count + + count=$(ip netns exec "${ns}" nstat -asz "${counter}" | + awk 'NR==1 {next} {print $2}') + if [ -z "${count}" ]; then + mptcp_lib_fail_if_expected_feature "${counter} counter" + return 1 + fi + + echo "${count}" +} --- a/tools/testing/selftests/net/mptcp/userspace_pm.sh +++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh @@ -887,9 +887,10 @@ test_prio()
# Check TX print_test "MP_PRIO TX" - count=$(ip netns exec "$ns2" nstat -as | grep MPTcpExtMPPrioTx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ $count != 1 ]; then + count=$(mptcp_lib_get_counter "$ns2" "MPTcpExtMPPrioTx") + if [ -z "$count" ]; then + test_skip + elif [ $count != 1 ]; then test_fail "Count != 1: ${count}" else test_pass @@ -897,9 +898,10 @@ test_prio()
# Check RX print_test "MP_PRIO RX" - count=$(ip netns exec "$ns1" nstat -as | grep MPTcpExtMPPrioRx | awk '{print $2}') - [ -z "$count" ] && count=0 - if [ $count != 1 ]; then + count=$(mptcp_lib_get_counter "$ns1" "MPTcpExtMPPrioRx") + if [ -z "$count" ]; then + test_skip + elif [ $count != 1 ]; then test_fail "Count != 1: ${count}" else test_pass
Den tis 27 feb. 2024 kl 14:32 skrev Greg Kroah-Hartman gregkh@linuxfoundation.org:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.7.7-rc1
Geliang Tang geliang.tang@linux.dev selftests: mptcp: add mptcp_lib_get_counter
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: join: stop transfer when check is done (part 2)
Chengming Zhou zhouchengming@bytedance.com mm/zswap: invalidate duplicate entry when !zswap_enabled
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: join: stop transfer when check is done (part 1)
Yosry Ahmed yosryahmed@google.com mm: zswap: fix missing folio cleanup in writeback race path
Corey Minyard minyard@acm.org i2c: imx: when being a target, mark the last read as processed
Melissa Wen mwen@igalia.com drm/amd/display: fix null-pointer dereference on edid reading
Armin Wolf W_Armin@gmx.de drm/amd/display: Fix memory leak in dm_sw_fini()
Srinivasan Shanmugam srinivasan.shanmugam@amd.com drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
Muhammad Usama Anjum usama.anjum@collabora.com selftests/iommu: fix the config fragment
Erik Kurzinger ekurzinger@nvidia.com drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func
Jason Gunthorpe jgg@ziepe.ca iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
Tina Zhang tina.zhang@intel.com iommu: Add mm_get_enqcmd_pasid() helper function
Erik Kurzinger ekurzinger@nvidia.com drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
Siddharth Vadapalli s-vadapalli@ti.com net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
Justin Iurman justin.iurman@uliege.be Fix write to cloned skb in ipv6_hop_ioam()
Rémi Denis-Courmont courmisch@gmail.com phonet/pep: fix racy skb_queue_empty() use
Rémi Denis-Courmont courmisch@gmail.com phonet: take correct lock to peek at the RX queue
Horatiu Vultur horatiu.vultur@microchip.com net: sparx5: Add spinlock for frame transmission from CPU
Jianbo Liu jianbol@nvidia.com net/sched: flower: Add lock protection when remove filter handle
Jiri Pirko jiri@resnulli.us devlink: fix port dump cmd type
Jakub Kicinski kuba@kernel.org tools: ynl: don't leak mcast_groups on init error
Jakub Kicinski kuba@kernel.org tools: ynl: make sure we always pass yarg to mnl_cb_run
Jeremy Kerr jk@codeconstruct.com.au net: mctp: put sock on tag allocation failure
Florian Westphal fw@strlen.de netfilter: nf_tables: use kzalloc for hook allocation
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: register hooks last when adding new chain/flowtable
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_flow_offload: release dst in case direct xmit path is used
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_flow_offload: reset dst in route object after setting up flow
Florian Westphal fw@strlen.de netfilter: nf_tables: set dormant flag on hook register failure
Sabrina Dubroca sd@queasysnail.net tls: don't skip over different type records from the rx_list
Sabrina Dubroca sd@queasysnail.net tls: stop recv() if initial process_rx_list gave us non-DATA
Sabrina Dubroca sd@queasysnail.net tls: break out of main loop when PEEK gets a non-data record
Guenter Roeck linux@roeck-us.net hwmon: (nct6775) Fix access to temperature configuration registers
Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
Shigeru Yoshida syoshida@redhat.com bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
Jason Gunthorpe jgg@ziepe.ca s390: use the correct count for __iowrite64_copy()
Jason Gunthorpe jgg@ziepe.ca iommufd: Reject non-zero data_type if no data_len is provided
Alex Elder elder@linaro.org net: ipa: don't overrun IPA suspend interrupt registers
Eric Dumazet edumazet@google.com net: implement lockless setsockopt(SO_PEEK_OFF)
Subbaraya Sundeep sbhatta@marvell.com octeontx2-af: Consider the action set by PF
Yi Liu yi.l.liu@intel.com iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
Yi Liu yi.l.liu@intel.com iommu/vt-d: Add missing dirty tracking set for parent domain
Yi Liu yi.l.liu@intel.com iommu/vt-d: Wrap the dirty tracking loop to be a helper
Yi Liu yi.l.liu@intel.com iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
Yi Liu yi.l.liu@intel.com iommu/vt-d: Track nested domains in parent
Yi Liu yi.l.liu@intel.com iommu/vt-d: Update iotlb in nested domain attach
Maxime Ripard mripard@kernel.org drm/i915/tv: Fix TV mode
Mario Limonciello mario.limonciello@amd.com platform/x86: thinkpad_acpi: Only update profile if successfully converted
Mark Brown broonie@kernel.org arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
Mark Brown broonie@kernel.org arm64/sme: Restore SME registers on exit from suspend
Emil Renner Berthing emil.renner.berthing@canonical.com gpiolib: Handle no pin_ranges in gpiochip_generic_config()
Amit Machhiwal amachhiw@linux.ibm.com KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
Kuniyuki Iwashima kuniyu@amazon.com arp: Prevent overflow in arp_req_get().
Vasiliy Kovalev kovalev@altlinux.org devlink: fix possible use-after-free and memory leaks in devlink_init()
Vasiliy Kovalev kovalev@altlinux.org ipv6: sr: fix possible use-after-free and null-ptr-deref
Daniil Dulov d.dulov@aladdin.ru afs: Increase buffer size in afs_update_volume_status()
Guenter Roeck linux@roeck-us.net parisc: Fix stack unwinder
Mark Pearson mpearson-lenovo@squebb.ca platform/x86: think-lmi: Fix password opcode ordering for workstations
Martin KaFai Lau martin.lau@kernel.org bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
Radhey Shyam Pandey radhey.shyam.pandey@amd.com ata: ahci_ceva: fix error handling for Xilinx GT PHY support
Hangbin Liu liuhangbin@gmail.com selftests: bonding: set active slave to primary eth1 specifically
Gaurav Batra gbatra@linux.ibm.com powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
Justin Chen justin.chen@broadcom.com net: bcmasp: Sanity check is off by one
Florian Fainelli florian.fainelli@broadcom.com net: bcmasp: Indicate MAC is in charge of PHY PM
Eric Dumazet edumazet@google.com ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid
Eric Dumazet edumazet@google.com ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid
Pavel Sakharov p.sakharov@ispras.ru net: stmmac: Fix incorrect dereference in interrupt handlers
Alison Schofield alison.schofield@intel.com x86/numa: Fix the sort compare func used in numa_fill_memblks()
Alison Schofield alison.schofield@intel.com x86/numa: Fix the address overlap check in numa_fill_memblks()
Dan Carpenter dan.carpenter@linaro.org drm/nouveau/mmu/r535: uninitialized variable in r535_bar_new_()
Arnd Bergmann arnd@arndb.de nouveau: fix function cast warnings
Jakub Kicinski kuba@kernel.org net/sched: act_mirred: don't override retval if we already lost the skb
Jakub Kicinski kuba@kernel.org net/sched: act_mirred: use the backlog for mirred ingress
Victor Nogueira victor@mojatatu.com net/sched: act_mirred: Create function tcf_mirred_to_dev and improve readability
Randy Dunlap rdunlap@infradead.org net: ethernet: adi: requires PHYLIB support
Kuniyuki Iwashima kuniyu@amazon.com dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().
Tobias Waldekranz tobias@waldekranz.com net: bridge: switchdev: Ensure deferred event delivery on unoffload
Tobias Waldekranz tobias@waldekranz.com net: bridge: switchdev: Skip MDB replays of deferred events on offload
Randy Dunlap rdunlap@infradead.org scsi: jazz_esp: Only build if SCSI core is builtin
Don Brace don.brace@microchip.com scsi: smartpqi: Fix disable_managed_interrupts
Dan Carpenter dan.carpenter@linaro.org scsi: ufs: Uninitialized variable in ufshcd_devfreq_target()
Gianmarco Lusvardi glusvardi@posteo.net bpf, scripts: Correct GPL license name
Arnd Bergmann arnd@arndb.de RDMA/srpt: fix function pointer cast warnings
Sebastian Andrzej Siewior bigeasy@linutronix.de xsk: Add truesize to skb_add_rx_frag().
Chris Morgan macromorgan@hotmail.com arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
Heiko Stuebner heiko.stuebner@cherry.de arm64: dts: rockchip: set num-cs property for spi on px30
Kamal Heib kheib@redhat.com RDMA/qedr: Fix qedr_create_user_qp error flow
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Consider page offset for the pages to be pinned
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Handle recording beyond the mapped pages
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Bounds check mapped::pages access
Lucas Stach l.stach@pengutronix.de bus: imx-weim: fix valid range check
Alexander Stein alexander.stein@ew.tq-group.com arm64: dts: tqma8mpql: fix audio codec iov-supply
Bart Van Assche bvanassche@acm.org RDMA/srpt: Support specifying the srpt_service_guid parameter
Mustafa Ismail mustafa.ismail@intel.com RDMA/irdma: Add AE for too many RNRS
Mustafa Ismail mustafa.ismail@intel.com RDMA/irdma: Set the CQ read threshold for GEN 1
Shiraz Saleem shiraz.saleem@intel.com RDMA/irdma: Validate max_send_wr and max_recv_wr
Mike Marciniszyn mike.marciniszyn@intel.com RDMA/irdma: Fix KASAN issue with tasklet
Marek Vasut marex@denx.de arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC
Mark Zhang markzhang@nvidia.com IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported
Kalesh AP kalesh-anakkur.purayil@broadcom.com RDMA/bnxt_re: Add a missing check in bnxt_qplib_query_srq
Kalesh AP kalesh-anakkur.purayil@broadcom.com RDMA/bnxt_re: Return error for SRQ resize
Zhipeng Lu alexious@zju.edu.cn IB/hfi1: Fix a memleak in init_credit_return
Sohaib Nadeem sohaib.nadeem@amd.com Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"
Srinivasan Shanmugam srinivasan.shanmugam@amd.com drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
Nathan Chancellor nathan@kernel.org drm/amd/display: Avoid enum conversion warning
Steve French stfrench@microsoft.com smb3: add missing null server pointer check
Lennert Buytenhek kernel@wantstofly.org ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: unique 'cestab' subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: unique 'in use' subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: fix bash warnings on older kernels
Geliang Tang geliang.tang@linux.dev selftests: mptcp: diag: check CURRESTAB counters
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: pm nl: avoid error msg on older kernels
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: pm nl: also list skipped tests
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: simult flows: fix some subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: userspace_pm: unique subtest names
Paolo Abeni pabeni@redhat.com mptcp: fix duplicate subflow creation
Paolo Abeni pabeni@redhat.com mptcp: fix data races on remote_id
Paolo Abeni pabeni@redhat.com mptcp: fix data races on local_id
Paolo Abeni pabeni@redhat.com mptcp: fix lockless access in subflow ULP diag
Geliang Tang tanggeliang@kylinos.cn mptcp: add needs_id for netlink appending addr
Geliang Tang tanggeliang@kylinos.cn mptcp: add needs_id for userspace appending addr
Xu Yang xu.yang_2@nxp.com usb: roles: don't get/set_role() when usb_role_switch is unregistered
Xu Yang xu.yang_2@nxp.com usb: roles: fix NULL pointer issue when put module's reference
Aaro Koskinen aaro.koskinen@iki.fi usb: gadget: omap_udc: fix USB gadget regression on Palm TE
Krishna Kurapati quic_kriskura@quicinc.com usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
Frank Li Frank.Li@nxp.com usb: cdns3: fix memory double free when handle zero packet
Frank Li Frank.Li@nxp.com usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
Pawel Laszczak pawell@cadence.com usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
Pawel Laszczak pawell@cadence.com usb: cdnsp: blocked some cdns3 specific code
Thinh Nguyen Thinh.Nguyen@synopsys.com usb: dwc3: gadget: Don't disconnect if not started
Lino Sanfilippo l.sanfilippo@kunbus.com serial: amba-pl011: Fix DMA transmission in RS485 mode
Lino Sanfilippo l.sanfilippo@kunbus.com serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
Ondrej Jirman megi@xff.cz Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
Sandeep Dhavale dhavale@google.com erofs: fix refcount on the metabuf used for inode lookup
Arnd Bergmann arnd@arndb.de dm-integrity, dm-verity: reduce stack usage for recheck
Nikita Shubin nikita.shubin@maquefel.me ARM: ep93xx: Add terminator to gpiod_lookup_table
Tom Parkin tparkin@katalix.com l2tp: pass correct message length to ip6_append_data
Vidya Sagar vidyas@nvidia.com PCI/MSI: Prevent MSI hardware interrupt number truncation
Nam Cao namcao@linutronix.de irqchip/sifive-plic: Enable interrupt if needed before EOI
Oliver Upton oliver.upton@linux.dev irqchip/gic-v3-its: Do not assume vPE tables are preallocated
Chen Jun chenjun102@huawei.com irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
zhenwei pi pizhenwei@bytedance.com crypto: virtio/akcipher - Fix stack overflow on memcpy
Vasiliy Kovalev kovalev@altlinux.org gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
Andrzej Kacprowski Andrzej.Kacprowski@intel.com accel/ivpu: Don't enable any tiles by default on VPU40xx
Oliver Upton oliver.upton@linux.dev KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
Oliver Upton oliver.upton@linux.dev KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
Yu Kuai yukuai3@huawei.com md: Fix missing release of 'active_io' for flush
Yu Kuai yukuai3@huawei.com md: Don't suspend the array for interrupted reshape
Yu Kuai yukuai3@huawei.com md: Don't register sync_thread for reshape directly
Yu Kuai yukuai3@huawei.com md: Make sure md_do_sync() will set MD_RECOVERY_DONE
Yu Kuai yukuai3@huawei.com md: Don't ignore read-only array in md_check_recovery()
Yu Kuai yukuai3@huawei.com md: Don't ignore suspended array in md_check_recovery()
Javier Martinez Canillas javierm@redhat.com sparc: Fix undefined reference to fb_is_primary_device
Baokun Li libaokun1@huawei.com cachefiles: fix memory leak in cachefiles_add_cache()
Hans de Goede hdegoede@redhat.com platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
Hans de Goede hdegoede@redhat.com platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
Hans de Goede hdegoede@redhat.com platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
Anshuman Khandual anshuman.khandual@arm.com mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
SeongJae Park sj@kernel.org mm/damon/reclaim: fix quota stauts loss due to online tunings
SeongJae Park sj@kernel.org mm/damon/core: check apply interval in damon_do_apply_schemes()
Johannes Weiner hannes@cmpxchg.org mm: memcontrol: clarify swapaccount=0 deprecation warning
SeongJae Park sj@kernel.org mm/damon/lru_sort: fix quota status loss due to online tunings
Kairui Song kasong@tencent.com mm/swap: fix race when skipping swapcache
Terry Tritton terry.tritton@linaro.org selftests/mm: uffd-unit-test check if huge page size is 0
Martin K. Petersen martin.petersen@oracle.com scsi: core: Consult supported VPD page list prior to fetching page
Naohiro Aota naohiro.aota@wdc.com scsi: target: pscsi: Fix bio_put() for error case
Martin K. Petersen martin.petersen@oracle.com scsi: sd: usb_storage: uas: Access media prior to querying device properties
Robert Richter rrichter@amd.com cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
Li Ming ming4.li@intel.com cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
Dan Williams dan.j.williams@intel.com cxl/acpi: Fix load failures due to single window creation failure
Mikulas Patocka mpatocka@redhat.com dm-verity: recheck the hash after a failure
Mikulas Patocka mpatocka@redhat.com dm-crypt: don't modify the data when using authenticated encryption
Mikulas Patocka mpatocka@redhat.com dm-integrity: recheck the integrity tag after a failure
Helge Deller deller@gmx.de Revert "parisc: Only list existing CPUs in cpu_possible_mask"
Mikulas Patocka mpatocka@redhat.com dm-crypt: recheck the integrity tag after a failure
Guenter Roeck linux@roeck-us.net lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
Bart Van Assche bvanassche@acm.org fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
Damien Le Moal dlemoal@kernel.org ata: libata-core: Do not call ata_dev_power_set_standby() twice
Damien Le Moal dlemoal@kernel.org ata: libata-core: Do not try to set sleeping devices to standby
Peter Oberparleiter oberpar@linux.ibm.com s390/cio: fix invalid -EBUSY on ccw_device_start
Ma Jun Jun.Ma2@amd.com drm/amdgpu: Fix the runtime resume failure issue
Wayne Lin wayne.lin@amd.com drm/amd/display: adjust few initialization order in dm
Lewis Huang lewis.huang@amd.com drm/amd/display: Only allow dig mapping to pwrseq in new asic
Arunpravin Paneer Selvam Arunpravin.PaneerSelvam@amd.com drm/buddy: Modify duplicate list_splice_tail call
Martin Blumenstingl martin.blumenstingl@googlemail.com drm/meson: Don't remove bridges which are created by other drivers
Thomas Hellström thomas.hellstrom@linux.intel.com drm/ttm: Fix an invalid freeing on already freed page in error path
Qu Wenruo wqu@suse.com btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
Huacai Chen chenhuacai@kernel.org LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
Huacai Chen chenhuacai@kernel.org LoongArch: Disable IRQ before init_fn() for nonboot CPUs
Huacai Chen chenhuacai@kernel.org LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
Jonathan Corbet corbet@lwn.net docs: Instruct LaTeX to cope with deeper nesting
Pawan Gupta pawan.kumar.gupta@linux.intel.com x86/bugs: Add asm helpers for executing VERW
David Gow davidgow@google.com kunit: Add a macro to wrap a deferred action function
Daniel Vacek neelx@redhat.com IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
Sohaib Nadeem sohaib.nadeem@amd.com drm/amd/display: fixed integer types and null check locations
Peichen Huang peichen.huang@amd.com drm/amd/display: Request usb4 bw for mst streams
Meenakshikumar Somasundaram meenakshikumar.somasundaram@amd.com drm/amd/display: Add dpia display mode validation logic
Paolo Abeni pabeni@redhat.com mptcp: corner case locking for rx path fields initialization
Paolo Abeni pabeni@redhat.com mptcp: fix more tx path fields initialization
Geliang Tang geliang.tang@linux.dev mptcp: use mptcp_set_state
Geliang Tang geliang.tang@linux.dev mptcp: add CurrEstab MIB counter support
Steve French stfrench@microsoft.com smb3: clarify mount warning
Shyam Prasad N sprasad@microsoft.com cifs: handle cases where multiple sessions share connection
Shyam Prasad N sprasad@microsoft.com cifs: change tcon status when need_reconnect is set on it
Yi Sun yi.sun@unisoc.com virtio-blk: Ensure no requests in virtqueues before deleting vqs.
Paulo Alcantara pc@manguebit.com smb: client: set correct d_type for reparse points under DFS mounts
Lijo Lazar lijo.lazar@amd.com drm/amdgpu: Fix HDP flush for VFs on nbio v7.9
Stanley.Yang Stanley.Yang@amd.com drm/amdgpu: Fix shared buff copy to user
Prike Liang Prike.Liang@amd.com drm/amdgpu: reset gpu for s3 suspend abort case
Prike Liang Prike.Liang@amd.com drm/amdgpu: skip to program GFXDEC registers for suspend abort
Xiubo Li xiubli@redhat.com ceph: always check dir caps asynchronously
Xiubo Li xiubli@redhat.com libceph: fail sparse-read if the data length doesn't match
Takashi Sakamoto o-takashi@sakamocchi.jp firewire: core: send bus reset promptly on gap count error
Krystian Pradzynski krystian.pradzynski@intel.com accel/ivpu/40xx: Stop passing SKU boot parameters to FW
Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com accel/ivpu: Disable d3hot_delay on all NPU generations
Wachowski, Karol karol.wachowski@intel.com accel/ivpu: Force snooping for MMU writes
Kees Cook keescook@chromium.org LoongArch: vDSO: Disable UBSAN instrumentation
Huacai Chen chenhuacai@kernel.org LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]
Masahiro Yamada masahiroy@kernel.org LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu
Masahiro Yamada masahiroy@kernel.org LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it
SEO HOYOUNG hy50.seo@samsung.com scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()
Alice Chao alice.chao@mediatek.com scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
Hannes Reinecke hare@suse.de scsi: lpfc: Use unsigned type for num_sge
Timur Tabi ttabi@nvidia.com drm/nouveau: nvkm_gsp_radix3_sg() should use nvkm_gsp_mem_ctor()
Zhang Rui rui.zhang@intel.com hwmon: (coretemp) Enlarge per package core count limit
Andrew Bresticker abrestic@rivosinc.com efi: Don't add memblocks for soft-reserved memory
Andrew Bresticker abrestic@rivosinc.com efi: runtime: Fix potential overflow of soft-reserved region size
Benjamin Berg benjamin.berg@intel.com wifi: iwlwifi: do not announce EPCS support
Johannes Berg johannes.berg@intel.com wifi: mac80211: accept broadcast probe responses on 6 GHz
Johannes Berg johannes.berg@intel.com wifi: mac80211: adding missing drv_mgd_complete_tx() call
Johannes Berg johannes.berg@intel.com wifi: mac80211: initialize SMPS mode correctly
Johannes Berg johannes.berg@intel.com wifi: mac80211: fix driver debugfs for vif type change
Johannes Berg johannes.berg@intel.com wifi: mac80211: set station RX-NSS on reconfig
Edward Adam Davis eadavis@qq.com fs/ntfs3: Fix oob in ntfs_listxattr
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Update inode->i_size after success write into compressed file
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fixed overflow check in mi_enum_attr()
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct function is_rst_area_valid
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Use i_size_read and i_size_write
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Prevent generic message "attempt to access beyond end of device"
Ism Hong ism.hong@gmail.com fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Use kvfree to free memory allocated by kvmalloc
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Disable ATTR_LIST_ENTRY size check
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix c/mtime typo
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame()
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add and fix comments
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: ntfs3_forced_shutdown use int instead of bool
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Implement super_operations::shutdown
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Drop suid and sgid bits as a part of fpunch
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add file_modified
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct use bh_read
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix detected field-spanning write (size 8) of single field "le->name"
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix multithreaded stress test
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Reduce stack usage
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Print warning while fixing hard links count
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct hard links updating when dealing with DOS names
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Improve ntfs_dir_count
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Modified fix directory element type detection
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Improve alternative boot processing
Szilard Fabian szfabian@bluemarch.art Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
Zhang Yi yi.zhang@huawei.com ext4: correct the hole length returned by ext4_map_blocks()
Paulo Alcantara pc@manguebit.com smb: client: increase number of PDUs allowed in a compound request
Shyam Prasad N sprasad@microsoft.com cifs: do not search for channel if server is terminating
Daniel Wagner dwagner@suse.de nvmet-fc: take ref count on tgtport before delete assoc
Daniel Wagner dwagner@suse.de nvmet-fc: avoid deadlock on delete association path
Daniel Wagner dwagner@suse.de nvmet-fc: abort command when there is no binding
Daniel Wagner dwagner@suse.de nvmet-fc: hold reference on hostport match
Daniel Wagner dwagner@suse.de nvmet-fc: free queue and assoc directly
Daniel Wagner dwagner@suse.de nvmet-fc: defer cleanup using RCU properly
Daniel Wagner dwagner@suse.de nvmet-fc: release reference on target port
Daniel Wagner dwagner@suse.de nvmet-fcloop: swap the list_add_tail arguments
Daniel Wagner dwagner@suse.de nvme-fc: do not wait in vain when unloading module
Alexander Tsoy alexander@tsoy.me ALSA: usb-audio: Ignore clock selector errors for single connection
Richard Fitzgerald rf@opensource.cirrus.com ASoC: wm_adsp: Don't overwrite fwf_name with the default
Shyam Prasad N sprasad@microsoft.com cifs: make sure that channel scaling is done only once
Dmytro Laktyushkin dmytro.laktyushkin@amd.com drm/amd/display: Fix DPSTREAM CLK on and off sequence
Charlene Liu charlene.liu@amd.com drm/amd/display: fix USB-C flag update after enc10 feature init
Sohaib Nadeem sohaib.nadeem@amd.com drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz
Mukul Joshi mukul.joshi@amd.com drm/amdkfd: Use correct drm device for cgroup permission check
Xin Long lucien.xin@gmail.com netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
Will Deacon will@kernel.org misc: open-dice: Fix spurious lockdep warning
Brenton Simpson appsforartists@google.com Input: xpad - add Lenovo Legion Go controllers
Wolfram Sang wsa+renesas@sang-engineering.com spi: sh-msiof: avoid integer overflow in constants
Patrick Rudolph patrick.rudolph@9elements.com regulator (max5970): Fix IRQ handler
Chhayly Leang clw.leang@gmail.com ALSA: hda: cs35l41: Support ASUS Zenbook UM3402YAR
Kenzo Gomez kenzo.sgomez@gmail.com ALSA: hda: cs35l41: Support additional ASUS Zenbook UX3402VA
Chen-Yu Tsai wens@csie.org ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
Alexander Tsoy alexander@tsoy.me ALSA: usb-audio: Check presence of valid altsetting control
Christian A. Ehrhardt lk@c--e.de usb: ucsi_acpi: Quirk to ack a connector change ack cmd
Guixin Liu kanie@linux.alibaba.com nvmet-tcp: fix nvme tcp ida memory leak
Kunwu Chan chentao@kylinos.cn HID: nvidia-shield: Add missing null pointer checks to LED initialization
Rui Salvaterra rsalvaterra@gmail.com ALSA: hda: Increase default bdl_pos_adj for Apollo Lake
Rui Salvaterra rsalvaterra@gmail.com ALSA: hda: Replace numeric device IDs with constant values
Jiri Kosina jikos@kernel.org HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
Martin Blumenstingl martin.blumenstingl@googlemail.com regulator: pwm-regulator: Add validity checks in continuous .get_voltage
Venkata Prasad Potturu venkataprasad.potturu@amd.com ASoC: amd: acp: Add check for cpu dai link initialization
Kunwu Chan chentao@kylinos.cn dmaengine: ti: edma: Add some null pointer checks to the edma_probe
Hans de Goede hdegoede@redhat.com Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
Baokun Li libaokun1@huawei.com ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
Baokun Li libaokun1@huawei.com ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
Baokun Li libaokun1@huawei.com ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
Phoenix Chen asbeltogf@gmail.com platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
Huang Pei huangpei@loongson.cn MIPS: reserve exception vector space ONLY ONCE
Roman Li Roman.Li@amd.com drm/amd/display: Disable ips before dc interrupt setting
Lukas Wunner lukas@wunner.de ARM: dts: Fix TPM schema violations
Lennert Buytenhek kernel@wantstofly.org ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
Charles Keepax ckeepax@opensource.cirrus.com spi: cs42l43: Handle error from devm_pm_runtime_enable
Maksim Kiselev bigunclemax@gmail.com aoe: avoid potential deadlock at set_capacity
Conrad Kostecki conikost@gentoo.org ahci: asm1166: correct count of reported ports
Shyam Prasad N sprasad@microsoft.com cifs: helper function to check replayable error codes
Shyam Prasad N sprasad@microsoft.com cifs: translate network errors on send to -ECONNABORTED
Shyam Prasad N sprasad@microsoft.com cifs: cifs_pick_channel should try selecting active channels
Kees Cook keescook@chromium.org smb: Work around Clang __bdos() type confusion
Christian A. Ehrhardt lk@c--e.de block: Fix WARNING in _copy_from_iter
Devyn Liu liudingyuan@huawei.com spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
Mika Westerberg mika.westerberg@linux.intel.com spi: intel-pci: Add support for Arrow Lake SPI serial flash
Liming Sun limings@nvidia.com platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
Fullway Wang fullwaywang@outlook.com fbdev: sis: Error out if pixclock equals zero
Fullway Wang fullwaywang@outlook.com fbdev: savage: Error out if pixclock equals zero
Felix Fietkau nbd@nbd.name wifi: mac80211: fix race condition on enabling fast-xmit
Michal Kazior michal@plume.com wifi: cfg80211: fix missing interfaces when dumping
Vinod Koul vkoul@kernel.org dmaengine: dw-edma: increase size of 'name' in debugfs code
Vinod Koul vkoul@kernel.org dmaengine: fsl-qdma: increase size of 'irq_name'
Vinod Koul vkoul@kernel.org dmaengine: shdma: increase size of 'dev_id'
Shyam Prasad N sprasad@microsoft.com cifs: open_cached_dir should not rely on primary channel
Dmitry Bogdanov d.bogdanov@yadro.com scsi: target: core: Add TMF to tmr_list handling
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in mm tests
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in vector tests
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in cbo
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in hwprobe
Mahesh Rajashekhara mahesh.rajashekhara@microchip.com scsi: smartpqi: Fix logical volume rescan race condition
David Strahan david.strahan@microchip.com scsi: smartpqi: Add new controller PCI IDs
Hector Martin marcan@marcan.st dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
Mario Limonciello mario.limonciello@amd.com drm/amd: Stop evicting resources on APUs in suspend
Diffstat:
Documentation/conf.py | 6 + Documentation/dev-tools/kunit/usage.rst | 10 +- Makefile | 4 +- .../dts/aspeed/aspeed-bmc-facebook-bletchley.dts | 4 +- .../dts/aspeed/aspeed-bmc-facebook-wedge400.dts | 4 +- arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 2 +- .../dts/aspeed/ast2600-facebook-netbmc-common.dtsi | 4 +- .../arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi | 2 +- .../boot/dts/nxp/imx/imx7d-flex-concentrator.dts | 2 +- .../dts/ti/omap/am335x-moxa-uc-2100-common.dtsi | 2 +- arch/arm/mach-ep93xx/core.c | 1 + .../dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +- .../dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 9 +- arch/arm64/boot/dts/rockchip/px30.dtsi | 2 + .../boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 10 +- arch/arm64/include/asm/fpsimd.h | 2 + arch/arm64/kernel/fpsimd.c | 16 ++ arch/arm64/kernel/suspend.c | 3 + arch/arm64/kvm/vgic/vgic-its.c | 5 + arch/loongarch/Kconfig | 23 +-- arch/loongarch/include/asm/acpi.h | 4 +- arch/loongarch/kernel/acpi.c | 4 +- arch/loongarch/kernel/setup.c | 4 +- arch/loongarch/kernel/smp.c | 122 ++++++----- arch/loongarch/vdso/Makefile | 1 + arch/mips/kernel/traps.c | 8 +- arch/parisc/kernel/processor.c | 8 - arch/parisc/kernel/unwind.c | 14 +- arch/powerpc/include/asm/ppc-pci.h | 10 + arch/powerpc/kernel/iommu.c | 23 ++- arch/powerpc/kvm/book3s_hv.c | 26 ++- arch/powerpc/kvm/book3s_hv_nestedv2.c | 20 +- arch/powerpc/platforms/pseries/pci_dlpar.c | 4 + arch/s390/pci/pci.c | 2 +- arch/sparc/Makefile | 2 +- arch/sparc/video/Makefile | 2 +- arch/x86/entry/entry.S | 23 +++ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/include/asm/nospec-branch.h | 13 ++ arch/x86/kernel/traps.c | 2 +- arch/x86/mm/numa.c | 21 +- block/blk-map.c | 13 +- drivers/accel/ivpu/ivpu_drv.c | 5 +- drivers/accel/ivpu/ivpu_hw_37xx.c | 2 +- drivers/accel/ivpu/ivpu_hw_40xx.c | 9 +- drivers/accel/ivpu/ivpu_mmu.c | 3 - drivers/ata/ahci.c | 44 +++- drivers/ata/ahci.h | 1 + drivers/ata/ahci_ceva.c | 125 ++++++----- drivers/ata/libata-core.c | 87 ++++---- drivers/block/aoe/aoeblk.c | 5 +- drivers/block/virtio_blk.c | 7 +- drivers/bus/imx-weim.c | 2 +- drivers/cache/ax45mp_cache.c | 4 + .../crypto/virtio/virtio_crypto_akcipher_algs.c | 5 +- drivers/cxl/acpi.c | 46 +++-- drivers/cxl/core/pci.c | 49 +++-- drivers/dma/apple-admac.c | 5 +- drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 4 +- drivers/dma/dw-edma/dw-hdma-v0-debugfs.c | 4 +- drivers/dma/fsl-qdma.c | 2 +- drivers/dma/sh/shdma.h | 2 +- drivers/dma/ti/edma.c | 10 + drivers/firewire/core-card.c | 18 +- drivers/firmware/efi/arm-runtime.c | 2 +- drivers/firmware/efi/efi-init.c | 19 +- drivers/firmware/efi/riscv-runtime.c | 2 +- drivers/gpio/gpiolib.c | 5 + drivers/gpu/drm/amd/amdgpu/amdgpu.h | 4 + drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 18 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 11 +- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 + drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c | 2 +- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 8 + drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c | 6 + drivers/gpu/drm/amd/amdgpu/soc15.c | 22 ++ drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 9 +- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 57 +++--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c | 5 +- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 16 +- .../gpu/drm/amd/display/dc/core/dc_link_exports.c | 2 +- drivers/gpu/drm/amd/display/dc/dc.h | 4 +- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 7 +- drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 6 + drivers/gpu/drm/amd/display/dc/dc_types.h | 14 +- .../gpu/drm/amd/display/dc/dce/dce_panel_cntl.c | 1 + .../drm/amd/display/dc/dcn301/dcn301_panel_cntl.c | 1 + .../drm/amd/display/dc/dcn31/dcn31_panel_cntl.c | 18 +- .../amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 4 +- .../amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 +- .../drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 2 +- .../drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 11 +- drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h | 2 +- drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 42 +++- drivers/gpu/drm/amd/display/dc/link/link_factory.c | 26 +-- .../gpu/drm/amd/display/dc/link/link_validation.c | 60 +++++- .../display/dc/link/protocols/link_dp_dpia_bw.c | 178 ++++++++++++---- .../display/dc/link/protocols/link_dp_dpia_bw.h | 9 + drivers/gpu/drm/drm_buddy.c | 4 +- drivers/gpu/drm/drm_syncobj.c | 19 +- drivers/gpu/drm/i915/display/intel_sdvo.c | 10 +- drivers/gpu/drm/i915/display/intel_tv.c | 10 +- drivers/gpu/drm/meson/meson_encoder_cvbs.c | 1 - drivers/gpu/drm/meson/meson_encoder_dsi.c | 1 - drivers/gpu/drm/meson/meson_encoder_hdmi.c | 1 - drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c | 5 +- drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c | 8 +- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 18 +- drivers/gpu/drm/ttm/ttm_pool.c | 2 +- drivers/hid/hid-logitech-hidpp.c | 2 + drivers/hid/hid-nvidia-shield.c | 4 + drivers/hwmon/coretemp.c | 2 +- drivers/hwmon/nct6775-core.c | 14 +- drivers/i2c/busses/i2c-imx.c | 5 + drivers/infiniband/hw/bnxt_re/ib_verbs.c | 5 +- drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 +- drivers/infiniband/hw/hfi1/pio.c | 6 +- drivers/infiniband/hw/hfi1/sdma.c | 2 +- drivers/infiniband/hw/irdma/defs.h | 1 + drivers/infiniband/hw/irdma/hw.c | 8 + drivers/infiniband/hw/irdma/verbs.c | 9 +- drivers/infiniband/hw/mlx5/cong.c | 6 + drivers/infiniband/hw/qedr/verbs.c | 11 +- drivers/infiniband/ulp/srpt/ib_srpt.c | 17 +- drivers/input/joystick/xpad.c | 2 + drivers/input/serio/i8042-acpipnpio.h | 8 + drivers/input/touchscreen/goodix.c | 3 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 45 ++-- drivers/iommu/intel/iommu.c | 87 ++++++-- drivers/iommu/intel/iommu.h | 7 + drivers/iommu/intel/nested.c | 14 +- drivers/iommu/intel/pasid.c | 5 +- drivers/iommu/intel/pasid.h | 1 - drivers/iommu/iommu-sva.c | 2 +- drivers/iommu/iommufd/hw_pagetable.c | 3 +- drivers/iommu/iommufd/iova_bitmap.c | 68 +++++- drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/irqchip/irq-mbigen.c | 8 +- drivers/irqchip/irq-sifive-plic.c | 8 +- drivers/md/dm-crypt.c | 95 +++++++-- drivers/md/dm-integrity.c | 91 +++++++- drivers/md/dm-verity-target.c | 86 +++++++- drivers/md/dm-verity.h | 6 + drivers/md/md.c | 70 ++++--- drivers/md/raid10.c | 16 +- drivers/md/raid5.c | 29 +-- drivers/misc/open-dice.c | 2 +- drivers/net/ethernet/adi/Kconfig | 1 + drivers/net/ethernet/broadcom/asp2/bcmasp.c | 6 +- drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c | 3 + .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 4 + .../net/ethernet/microchip/sparx5/sparx5_main.c | 1 + .../net/ethernet/microchip/sparx5/sparx5_main.h | 1 + .../net/ethernet/microchip/sparx5/sparx5_packet.c | 2 + drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 -- drivers/net/gtp.c | 10 +- drivers/net/ipa/ipa_interrupt.c | 2 +- drivers/net/phy/realtek.c | 4 +- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 5 +- drivers/nvme/host/fc.c | 47 +---- drivers/nvme/target/fc.c | 137 +++++++------ drivers/nvme/target/fcloop.c | 6 +- drivers/nvme/target/tcp.c | 1 + drivers/pci/msi/irqdomain.c | 2 +- drivers/platform/mellanox/mlxbf-tmfifo.c | 67 ++++++ drivers/platform/x86/intel/vbtn.c | 3 - drivers/platform/x86/think-lmi.c | 20 +- drivers/platform/x86/thinkpad_acpi.c | 5 +- drivers/platform/x86/touchscreen_dmi.c | 39 +++- drivers/platform/x86/x86-android-tablets/core.c | 3 + drivers/platform/x86/x86-android-tablets/lenovo.c | 1 + .../x86/x86-android-tablets/x86-android-tablets.h | 1 + drivers/regulator/max5970-regulator.c | 2 +- drivers/regulator/pwm-regulator.c | 3 + drivers/s390/cio/device_ops.c | 6 +- drivers/scsi/Kconfig | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 12 +- drivers/scsi/scsi.c | 22 +- drivers/scsi/sd.c | 26 ++- drivers/scsi/smartpqi/smartpqi.h | 1 - drivers/scsi/smartpqi/smartpqi_init.c | 88 +++++++- drivers/spi/spi-cs42l43.c | 5 +- drivers/spi/spi-hisi-sfc-v3xx.c | 5 + drivers/spi/spi-intel-pci.c | 1 + drivers/spi/spi-sh-msiof.c | 16 +- drivers/target/target_core_device.c | 5 - drivers/target/target_core_pscsi.c | 9 +- drivers/target/target_core_transport.c | 4 + drivers/tty/serial/amba-pl011.c | 60 +++--- drivers/tty/serial/stm32-usart.c | 4 +- drivers/ufs/core/ufshcd.c | 7 +- drivers/usb/cdns3/cdns3-gadget.c | 8 +- drivers/usb/cdns3/core.c | 1 - drivers/usb/cdns3/drd.c | 13 +- drivers/usb/cdns3/drd.h | 6 +- drivers/usb/cdns3/host.c | 16 +- drivers/usb/dwc3/gadget.c | 5 + drivers/usb/gadget/function/f_ncm.c | 10 +- drivers/usb/gadget/udc/omap_udc.c | 3 +- drivers/usb/roles/class.c | 29 ++- drivers/usb/storage/scsiglue.c | 7 + drivers/usb/storage/uas.c | 7 + drivers/usb/typec/tcpm/tcpm.c | 3 - drivers/usb/typec/ucsi/ucsi_acpi.c | 71 ++++++- drivers/video/fbdev/savage/savagefb_driver.c | 3 + drivers/video/fbdev/sis/sis_main.c | 2 + fs/afs/volume.c | 4 +- fs/aio.c | 9 +- fs/btrfs/defrag.c | 2 +- fs/cachefiles/cache.c | 2 + fs/cachefiles/daemon.c | 1 + fs/ceph/caps.c | 6 - fs/ceph/mds_client.c | 9 +- fs/ceph/mds_client.h | 2 +- fs/ceph/super.h | 2 - fs/erofs/namei.c | 28 +-- fs/ext4/extents.c | 111 ++++++---- fs/ext4/mballoc.c | 15 +- fs/ntfs3/attrib.c | 45 ++-- fs/ntfs3/attrlist.c | 12 +- fs/ntfs3/bitmap.c | 4 +- fs/ntfs3/dir.c | 44 ++-- fs/ntfs3/file.c | 72 +++++-- fs/ntfs3/frecord.c | 19 +- fs/ntfs3/fslog.c | 228 ++++++++++----------- fs/ntfs3/fsntfs.c | 29 ++- fs/ntfs3/index.c | 8 +- fs/ntfs3/inode.c | 32 ++- fs/ntfs3/namei.c | 12 ++ fs/ntfs3/ntfs.h | 4 +- fs/ntfs3/ntfs_fs.h | 25 +-- fs/ntfs3/record.c | 18 +- fs/ntfs3/super.c | 49 +++-- fs/ntfs3/xattr.c | 6 + fs/smb/client/cached_dir.c | 3 +- fs/smb/client/cifsencrypt.c | 2 +- fs/smb/client/cifsglob.h | 12 +- fs/smb/client/connect.c | 11 + fs/smb/client/dfs.c | 7 +- fs/smb/client/file.c | 3 + fs/smb/client/fs_context.c | 2 +- fs/smb/client/readdir.c | 15 +- fs/smb/client/sess.c | 5 +- fs/smb/client/smb2pdu.c | 26 ++- fs/smb/client/transport.c | 18 +- include/kunit/resource.h | 21 ++ include/linux/ceph/osd_client.h | 3 +- include/linux/fs.h | 2 + include/linux/iommu.h | 12 ++ include/linux/memblock.h | 2 + include/linux/mlx5/mlx5_ifc.h | 2 +- include/linux/swap.h | 5 + include/net/netfilter/nf_flow_table.h | 2 +- include/net/switchdev.h | 3 + include/net/tcp.h | 2 +- include/scsi/scsi_device.h | 5 +- kernel/bpf/helpers.c | 5 +- lib/Kconfig.debug | 1 + lib/kunit/kunit-test.c | 5 +- lib/kunit/test.c | 6 +- mm/damon/core.c | 15 +- mm/damon/lru_sort.c | 43 +++- mm/damon/reclaim.c | 18 +- mm/memblock.c | 6 +- mm/memcontrol.c | 10 +- mm/memory.c | 20 ++ mm/swap.h | 5 + mm/swapfile.c | 13 ++ mm/zswap.c | 7 +- net/bridge/br_switchdev.c | 86 +++++--- net/ceph/osd_client.c | 18 +- net/core/skmsg.c | 7 +- net/core/sock.c | 23 +-- net/devlink/core.c | 12 +- net/devlink/port.c | 2 +- net/ipv4/arp.c | 3 +- net/ipv4/devinet.c | 21 +- net/ipv4/inet_hashtables.c | 25 ++- net/ipv4/udp.c | 7 +- net/ipv6/addrconf.c | 21 +- net/ipv6/exthdrs.c | 10 + net/ipv6/seg6.c | 20 +- net/l2tp/l2tp_ip6.c | 2 +- net/mac80211/cfg.c | 2 + net/mac80211/debugfs_netdev.c | 4 +- net/mac80211/debugfs_netdev.h | 5 - net/mac80211/iface.c | 2 +- net/mac80211/mlme.c | 8 +- net/mac80211/scan.c | 30 +-- net/mac80211/sta_info.c | 2 + net/mac80211/tx.c | 2 +- net/mctp/route.c | 2 +- net/mptcp/diag.c | 8 +- net/mptcp/fastopen.c | 6 +- net/mptcp/mib.c | 1 + net/mptcp/mib.h | 8 + net/mptcp/options.c | 9 +- net/mptcp/pm_netlink.c | 74 ++++--- net/mptcp/pm_userspace.c | 15 +- net/mptcp/protocol.c | 69 ++++--- net/mptcp/protocol.h | 25 ++- net/mptcp/subflow.c | 86 +++++--- net/netfilter/nf_conntrack_proto_sctp.c | 2 +- net/netfilter/nf_flow_table_core.c | 17 +- net/netfilter/nf_tables_api.c | 81 ++++---- net/phonet/datagram.c | 4 +- net/phonet/pep.c | 41 +++- net/sched/act_mirred.c | 147 ++++++------- net/sched/cls_flower.c | 5 +- net/switchdev/switchdev.c | 73 +++++++ net/tls/tls_main.c | 2 +- net/tls/tls_sw.c | 24 ++- net/unix/af_unix.c | 19 +- net/wireless/nl80211.c | 1 + net/xdp/xsk.c | 3 +- scripts/bpf_doc.py | 2 +- sound/pci/hda/cs35l41_hda_property.c | 4 + sound/pci/hda/hda_intel.c | 6 +- sound/soc/amd/acp/acp-mach-common.c | 9 +- sound/soc/codecs/wm_adsp.c | 29 ++- sound/soc/sunxi/sun4i-spdif.c | 5 + sound/usb/clock.c | 10 +- sound/usb/format.c | 20 ++ tools/net/ynl/lib/ynl.c | 19 +- .../selftests/drivers/net/bonding/bond_options.sh | 2 + tools/testing/selftests/iommu/config | 5 +- tools/testing/selftests/mm/uffd-unit-tests.c | 6 + .../testing/selftests/net/forwarding/tc_actions.sh | 3 - tools/testing/selftests/net/mptcp/diag.sh | 46 ++++- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 41 ++-- tools/testing/selftests/net/mptcp/mptcp_join.sh | 109 ++++------ tools/testing/selftests/net/mptcp/mptcp_lib.sh | 16 ++ tools/testing/selftests/net/mptcp/pm_netlink.sh | 8 +- tools/testing/selftests/net/mptcp/simult_flows.sh | 3 +- tools/testing/selftests/net/mptcp/userspace_pm.sh | 18 +- tools/testing/selftests/riscv/hwprobe/cbo.c | 6 +- tools/testing/selftests/riscv/hwprobe/hwprobe.c | 4 +- tools/testing/selftests/riscv/mm/mmap_test.h | 3 + .../selftests/riscv/vector/v_initval_nolibc.c | 2 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 4 +- 340 files changed, 3847 insertions(+), 1826 deletions(-)
Works fine on my desktop with model name : AMD Ryzen 5 5600 6-Core Processor and Arch Linux
Tested-by: Luna Jernberg droidbittin@gmail.com
Hello,
On Tue, 27 Feb 2024 14:17:38 +0100 Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
This rc kernel passes DAMON functionality test[1] on my test machine. Attaching the test results summary below. Please note that I retrieved the kernel from linux-stable-rc tree[2].
Tested-by: SeongJae Park sj@kernel.org
[1] https://github.com/awslabs/damon-tests/tree/next/corr [2] efce2e661579 ("Linux 6.7.7-rc1")
Thanks, SJ
[...]
---
ok 1 selftests: damon: debugfs_attrs.sh ok 2 selftests: damon: debugfs_schemes.sh ok 3 selftests: damon: debugfs_target_ids.sh ok 4 selftests: damon: debugfs_empty_targets.sh ok 5 selftests: damon: debugfs_huge_count_read_write.sh ok 6 selftests: damon: debugfs_duplicate_context_creation.sh ok 7 selftests: damon: debugfs_rm_non_contexts.sh ok 8 selftests: damon: sysfs.sh ok 9 selftests: damon: sysfs_update_removed_scheme_dir.sh ok 10 selftests: damon: reclaim.sh ok 11 selftests: damon: lru_sort.sh ok 1 selftests: damon-tests: kunit.sh ok 2 selftests: damon-tests: huge_count_read_write.sh ok 3 selftests: damon-tests: buffer_overflow.sh ok 4 selftests: damon-tests: rm_contexts.sh ok 5 selftests: damon-tests: record_null_deref.sh ok 6 selftests: damon-tests: dbgfs_target_ids_read_before_terminate_race.sh ok 7 selftests: damon-tests: dbgfs_target_ids_pid_leak.sh ok 8 selftests: damon-tests: damo_tests.sh ok 9 selftests: damon-tests: masim-record.sh ok 10 selftests: damon-tests: build_i386.sh ok 11 selftests: damon-tests: build_arm64.sh ok 12 selftests: damon-tests: build_m68k.sh ok 13 selftests: damon-tests: build_i386_idle_flag.sh ok 14 selftests: damon-tests: build_i386_highpte.sh ok 15 selftests: damon-tests: build_nomemcg.sh [33m [92mPASS [39m
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my x86_64 and ARM64 test systems. No errors or regressions.
Tested-by: Allen Pais apais@linux.microsoft.com
Thanks.
On 2/27/24 05:17, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:
Tested-by: Florian Fainelli florian.fainelli@broadcom.com
On 2/27/24 5:17 AM, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
Built and booted successfully on RISC-V RV64 (HiFive Unmatched).
Tested-by: Ron Economos re@w6rz.net
On 27/02/2024 13:17, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
No new regressions for Tegra ...
Test results for stable-v6.7: 10 builds: 10 pass, 0 fail 26 boots: 26 pass, 0 fail 116 tests: 115 pass, 1 fail
Linux version: 6.7.7-rc1-gefce2e661579 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Test failures: tegra186-p2771-0000: pm-system-suspend.sh
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On Tue, 27 Feb 2024 at 18:59, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
## Build * kernel: 6.7.7-rc1 * git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc * git branch: linux-6.7.y * git commit: efce2e6615798a9e83b7a4798f3713414938ab6b * git describe: v6.7.6-335-gefce2e661579 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.7.y/build/v6.7.6-...
## Test Regressions (compared to v6.7.6)
## Metric Regressions (compared to v6.7.6)
## Test Fixes (compared to v6.7.6)
## Metric Fixes (compared to v6.7.6)
## Test result summary total: 264420, pass: 228013, fail: 3651, skip: 32434, xfail: 322
## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 129 total, 129 passed, 0 failed * arm64: 38 total, 38 passed, 0 failed * i386: 29 total, 29 passed, 0 failed * mips: 24 total, 24 passed, 0 failed * parisc: 3 total, 3 passed, 0 failed * powerpc: 34 total, 32 passed, 2 failed * riscv: 16 total, 16 passed, 0 failed * s390: 12 total, 12 passed, 0 failed * sh: 10 total, 10 passed, 0 failed * sparc: 6 total, 6 passed, 0 failed * x86_64: 33 total, 33 passed, 0 failed
## Test suites summary * boot * kselftest-android * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-exec * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-filesystems-epoll * kselftest-firmware * kselftest-fpu * kselftest-ftrace * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-memory-hotplug * kselftest-mincore * kselftest-mm * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-seccomp * kselftest-sigaltstack * kselftest-size * kselftest-splice * kselftest-static_keys * kselftest-sync * kselftest-sysctl * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-user_events * kselftest-vDSO * kselftest-watchdog * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-smoketest * ltp-syscalls * ltp-tracing * perf * rcutorture * timesync-off
-- Linaro LKFT https://lkft.linaro.org
On Tue, Feb 27, 2024 at 02:17:38PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Tested-by: Conor Dooley conor.dooley@microchip.com
Cheers, Conor.
On 2/27/24 06:17, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan skhan@linuxfoundation.org
thanks, -- Shuah
On Tue, Feb 27, 2024 at 02:17:38PM +0100, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
Tested rc1 against the Fedora build system (aarch64, ppc64le, s390x, x86_64), and boot tested x86_64. No regressions noted.
Tested-by: Justin M. Forbes jforbes@fedoraproject.org
Hi Greg,
On 27 Feb 14:17, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
No noticeable regressions on my system.
Tested-by: Ricardo B. Marliere ricardo@marliere.net
Thanks, - Ricardo.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
thanks,
greg k-h
Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 6.7.7-rc1
Geliang Tang geliang.tang@linux.dev selftests: mptcp: add mptcp_lib_get_counter
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: join: stop transfer when check is done (part 2)
Chengming Zhou zhouchengming@bytedance.com mm/zswap: invalidate duplicate entry when !zswap_enabled
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: join: stop transfer when check is done (part 1)
Yosry Ahmed yosryahmed@google.com mm: zswap: fix missing folio cleanup in writeback race path
Corey Minyard minyard@acm.org i2c: imx: when being a target, mark the last read as processed
Melissa Wen mwen@igalia.com drm/amd/display: fix null-pointer dereference on edid reading
Armin Wolf W_Armin@gmx.de drm/amd/display: Fix memory leak in dm_sw_fini()
Srinivasan Shanmugam srinivasan.shanmugam@amd.com drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
Muhammad Usama Anjum usama.anjum@collabora.com selftests/iommu: fix the config fragment
Erik Kurzinger ekurzinger@nvidia.com drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func
Jason Gunthorpe jgg@ziepe.ca iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
Tina Zhang tina.zhang@intel.com iommu: Add mm_get_enqcmd_pasid() helper function
Erik Kurzinger ekurzinger@nvidia.com drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
Siddharth Vadapalli s-vadapalli@ti.com net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
Justin Iurman justin.iurman@uliege.be Fix write to cloned skb in ipv6_hop_ioam()
Rémi Denis-Courmont courmisch@gmail.com phonet/pep: fix racy skb_queue_empty() use
Rémi Denis-Courmont courmisch@gmail.com phonet: take correct lock to peek at the RX queue
Horatiu Vultur horatiu.vultur@microchip.com net: sparx5: Add spinlock for frame transmission from CPU
Jianbo Liu jianbol@nvidia.com net/sched: flower: Add lock protection when remove filter handle
Jiri Pirko jiri@resnulli.us devlink: fix port dump cmd type
Jakub Kicinski kuba@kernel.org tools: ynl: don't leak mcast_groups on init error
Jakub Kicinski kuba@kernel.org tools: ynl: make sure we always pass yarg to mnl_cb_run
Jeremy Kerr jk@codeconstruct.com.au net: mctp: put sock on tag allocation failure
Florian Westphal fw@strlen.de netfilter: nf_tables: use kzalloc for hook allocation
Pablo Neira Ayuso pablo@netfilter.org netfilter: nf_tables: register hooks last when adding new chain/flowtable
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_flow_offload: release dst in case direct xmit path is used
Pablo Neira Ayuso pablo@netfilter.org netfilter: nft_flow_offload: reset dst in route object after setting up flow
Florian Westphal fw@strlen.de netfilter: nf_tables: set dormant flag on hook register failure
Sabrina Dubroca sd@queasysnail.net tls: don't skip over different type records from the rx_list
Sabrina Dubroca sd@queasysnail.net tls: stop recv() if initial process_rx_list gave us non-DATA
Sabrina Dubroca sd@queasysnail.net tls: break out of main loop when PEEK gets a non-data record
Guenter Roeck linux@roeck-us.net hwmon: (nct6775) Fix access to temperature configuration registers
Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
Shigeru Yoshida syoshida@redhat.com bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
Jason Gunthorpe jgg@ziepe.ca s390: use the correct count for __iowrite64_copy()
Jason Gunthorpe jgg@ziepe.ca iommufd: Reject non-zero data_type if no data_len is provided
Alex Elder elder@linaro.org net: ipa: don't overrun IPA suspend interrupt registers
Eric Dumazet edumazet@google.com net: implement lockless setsockopt(SO_PEEK_OFF)
Subbaraya Sundeep sbhatta@marvell.com octeontx2-af: Consider the action set by PF
Yi Liu yi.l.liu@intel.com iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
Yi Liu yi.l.liu@intel.com iommu/vt-d: Add missing dirty tracking set for parent domain
Yi Liu yi.l.liu@intel.com iommu/vt-d: Wrap the dirty tracking loop to be a helper
Yi Liu yi.l.liu@intel.com iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
Yi Liu yi.l.liu@intel.com iommu/vt-d: Track nested domains in parent
Yi Liu yi.l.liu@intel.com iommu/vt-d: Update iotlb in nested domain attach
Maxime Ripard mripard@kernel.org drm/i915/tv: Fix TV mode
Mario Limonciello mario.limonciello@amd.com platform/x86: thinkpad_acpi: Only update profile if successfully converted
Mark Brown broonie@kernel.org arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
Mark Brown broonie@kernel.org arm64/sme: Restore SME registers on exit from suspend
Emil Renner Berthing emil.renner.berthing@canonical.com gpiolib: Handle no pin_ranges in gpiochip_generic_config()
Amit Machhiwal amachhiw@linux.ibm.com KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
Kuniyuki Iwashima kuniyu@amazon.com arp: Prevent overflow in arp_req_get().
Vasiliy Kovalev kovalev@altlinux.org devlink: fix possible use-after-free and memory leaks in devlink_init()
Vasiliy Kovalev kovalev@altlinux.org ipv6: sr: fix possible use-after-free and null-ptr-deref
Daniil Dulov d.dulov@aladdin.ru afs: Increase buffer size in afs_update_volume_status()
Guenter Roeck linux@roeck-us.net parisc: Fix stack unwinder
Mark Pearson mpearson-lenovo@squebb.ca platform/x86: think-lmi: Fix password opcode ordering for workstations
Martin KaFai Lau martin.lau@kernel.org bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
Radhey Shyam Pandey radhey.shyam.pandey@amd.com ata: ahci_ceva: fix error handling for Xilinx GT PHY support
Hangbin Liu liuhangbin@gmail.com selftests: bonding: set active slave to primary eth1 specifically
Gaurav Batra gbatra@linux.ibm.com powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
Justin Chen justin.chen@broadcom.com net: bcmasp: Sanity check is off by one
Florian Fainelli florian.fainelli@broadcom.com net: bcmasp: Indicate MAC is in charge of PHY PM
Eric Dumazet edumazet@google.com ipv6: properly combine dev_base_seq and ipv6.dev_addr_genid
Eric Dumazet edumazet@google.com ipv4: properly combine dev_base_seq and ipv4.dev_addr_genid
Pavel Sakharov p.sakharov@ispras.ru net: stmmac: Fix incorrect dereference in interrupt handlers
Alison Schofield alison.schofield@intel.com x86/numa: Fix the sort compare func used in numa_fill_memblks()
Alison Schofield alison.schofield@intel.com x86/numa: Fix the address overlap check in numa_fill_memblks()
Dan Carpenter dan.carpenter@linaro.org drm/nouveau/mmu/r535: uninitialized variable in r535_bar_new_()
Arnd Bergmann arnd@arndb.de nouveau: fix function cast warnings
Jakub Kicinski kuba@kernel.org net/sched: act_mirred: don't override retval if we already lost the skb
Jakub Kicinski kuba@kernel.org net/sched: act_mirred: use the backlog for mirred ingress
Victor Nogueira victor@mojatatu.com net/sched: act_mirred: Create function tcf_mirred_to_dev and improve readability
Randy Dunlap rdunlap@infradead.org net: ethernet: adi: requires PHYLIB support
Kuniyuki Iwashima kuniyu@amazon.com dccp/tcp: Unhash sk from ehash for tb2 alloc failure after check_estalblished().
Tobias Waldekranz tobias@waldekranz.com net: bridge: switchdev: Ensure deferred event delivery on unoffload
Tobias Waldekranz tobias@waldekranz.com net: bridge: switchdev: Skip MDB replays of deferred events on offload
Randy Dunlap rdunlap@infradead.org scsi: jazz_esp: Only build if SCSI core is builtin
Don Brace don.brace@microchip.com scsi: smartpqi: Fix disable_managed_interrupts
Dan Carpenter dan.carpenter@linaro.org scsi: ufs: Uninitialized variable in ufshcd_devfreq_target()
Gianmarco Lusvardi glusvardi@posteo.net bpf, scripts: Correct GPL license name
Arnd Bergmann arnd@arndb.de RDMA/srpt: fix function pointer cast warnings
Sebastian Andrzej Siewior bigeasy@linutronix.de xsk: Add truesize to skb_add_rx_frag().
Chris Morgan macromorgan@hotmail.com arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
Heiko Stuebner heiko.stuebner@cherry.de arm64: dts: rockchip: set num-cs property for spi on px30
Kamal Heib kheib@redhat.com RDMA/qedr: Fix qedr_create_user_qp error flow
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Consider page offset for the pages to be pinned
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Handle recording beyond the mapped pages
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
Joao Martins joao.m.martins@oracle.com iommufd/iova_bitmap: Bounds check mapped::pages access
Lucas Stach l.stach@pengutronix.de bus: imx-weim: fix valid range check
Alexander Stein alexander.stein@ew.tq-group.com arm64: dts: tqma8mpql: fix audio codec iov-supply
Bart Van Assche bvanassche@acm.org RDMA/srpt: Support specifying the srpt_service_guid parameter
Mustafa Ismail mustafa.ismail@intel.com RDMA/irdma: Add AE for too many RNRS
Mustafa Ismail mustafa.ismail@intel.com RDMA/irdma: Set the CQ read threshold for GEN 1
Shiraz Saleem shiraz.saleem@intel.com RDMA/irdma: Validate max_send_wr and max_recv_wr
Mike Marciniszyn mike.marciniszyn@intel.com RDMA/irdma: Fix KASAN issue with tasklet
Marek Vasut marex@denx.de arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC
Mark Zhang markzhang@nvidia.com IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported
Kalesh AP kalesh-anakkur.purayil@broadcom.com RDMA/bnxt_re: Add a missing check in bnxt_qplib_query_srq
Kalesh AP kalesh-anakkur.purayil@broadcom.com RDMA/bnxt_re: Return error for SRQ resize
Zhipeng Lu alexious@zju.edu.cn IB/hfi1: Fix a memleak in init_credit_return
Sohaib Nadeem sohaib.nadeem@amd.com Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz"
Srinivasan Shanmugam srinivasan.shanmugam@amd.com drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()'
Nathan Chancellor nathan@kernel.org drm/amd/display: Avoid enum conversion warning
Steve French stfrench@microsoft.com smb3: add missing null server pointer check
Lennert Buytenhek kernel@wantstofly.org ahci: Extend ASM1061 43-bit DMA address quirk to other ASM106x parts
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: unique 'cestab' subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: unique 'in use' subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: diag: fix bash warnings on older kernels
Geliang Tang geliang.tang@linux.dev selftests: mptcp: diag: check CURRESTAB counters
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: pm nl: avoid error msg on older kernels
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: pm nl: also list skipped tests
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: simult flows: fix some subtest names
Matthieu Baerts (NGI0) matttbe@kernel.org selftests: mptcp: userspace_pm: unique subtest names
Paolo Abeni pabeni@redhat.com mptcp: fix duplicate subflow creation
Paolo Abeni pabeni@redhat.com mptcp: fix data races on remote_id
Paolo Abeni pabeni@redhat.com mptcp: fix data races on local_id
Paolo Abeni pabeni@redhat.com mptcp: fix lockless access in subflow ULP diag
Geliang Tang tanggeliang@kylinos.cn mptcp: add needs_id for netlink appending addr
Geliang Tang tanggeliang@kylinos.cn mptcp: add needs_id for userspace appending addr
Xu Yang xu.yang_2@nxp.com usb: roles: don't get/set_role() when usb_role_switch is unregistered
Xu Yang xu.yang_2@nxp.com usb: roles: fix NULL pointer issue when put module's reference
Aaro Koskinen aaro.koskinen@iki.fi usb: gadget: omap_udc: fix USB gadget regression on Palm TE
Krishna Kurapati quic_kriskura@quicinc.com usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
Frank Li Frank.Li@nxp.com usb: cdns3: fix memory double free when handle zero packet
Frank Li Frank.Li@nxp.com usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
Pawel Laszczak pawell@cadence.com usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
Pawel Laszczak pawell@cadence.com usb: cdnsp: blocked some cdns3 specific code
Thinh Nguyen Thinh.Nguyen@synopsys.com usb: dwc3: gadget: Don't disconnect if not started
Lino Sanfilippo l.sanfilippo@kunbus.com serial: amba-pl011: Fix DMA transmission in RS485 mode
Lino Sanfilippo l.sanfilippo@kunbus.com serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
Ondrej Jirman megi@xff.cz Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
Sandeep Dhavale dhavale@google.com erofs: fix refcount on the metabuf used for inode lookup
Arnd Bergmann arnd@arndb.de dm-integrity, dm-verity: reduce stack usage for recheck
Nikita Shubin nikita.shubin@maquefel.me ARM: ep93xx: Add terminator to gpiod_lookup_table
Tom Parkin tparkin@katalix.com l2tp: pass correct message length to ip6_append_data
Vidya Sagar vidyas@nvidia.com PCI/MSI: Prevent MSI hardware interrupt number truncation
Nam Cao namcao@linutronix.de irqchip/sifive-plic: Enable interrupt if needed before EOI
Oliver Upton oliver.upton@linux.dev irqchip/gic-v3-its: Do not assume vPE tables are preallocated
Chen Jun chenjun102@huawei.com irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
zhenwei pi pizhenwei@bytedance.com crypto: virtio/akcipher - Fix stack overflow on memcpy
Vasiliy Kovalev kovalev@altlinux.org gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()
Andrzej Kacprowski Andrzej.Kacprowski@intel.com accel/ivpu: Don't enable any tiles by default on VPU40xx
Oliver Upton oliver.upton@linux.dev KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
Oliver Upton oliver.upton@linux.dev KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
Yu Kuai yukuai3@huawei.com md: Fix missing release of 'active_io' for flush
Yu Kuai yukuai3@huawei.com md: Don't suspend the array for interrupted reshape
Yu Kuai yukuai3@huawei.com md: Don't register sync_thread for reshape directly
Yu Kuai yukuai3@huawei.com md: Make sure md_do_sync() will set MD_RECOVERY_DONE
Yu Kuai yukuai3@huawei.com md: Don't ignore read-only array in md_check_recovery()
Yu Kuai yukuai3@huawei.com md: Don't ignore suspended array in md_check_recovery()
Javier Martinez Canillas javierm@redhat.com sparc: Fix undefined reference to fb_is_primary_device
Baokun Li libaokun1@huawei.com cachefiles: fix memory leak in cachefiles_add_cache()
Hans de Goede hdegoede@redhat.com platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
Hans de Goede hdegoede@redhat.com platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
Hans de Goede hdegoede@redhat.com platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
Anshuman Khandual anshuman.khandual@arm.com mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
SeongJae Park sj@kernel.org mm/damon/reclaim: fix quota stauts loss due to online tunings
SeongJae Park sj@kernel.org mm/damon/core: check apply interval in damon_do_apply_schemes()
Johannes Weiner hannes@cmpxchg.org mm: memcontrol: clarify swapaccount=0 deprecation warning
SeongJae Park sj@kernel.org mm/damon/lru_sort: fix quota status loss due to online tunings
Kairui Song kasong@tencent.com mm/swap: fix race when skipping swapcache
Terry Tritton terry.tritton@linaro.org selftests/mm: uffd-unit-test check if huge page size is 0
Martin K. Petersen martin.petersen@oracle.com scsi: core: Consult supported VPD page list prior to fetching page
Naohiro Aota naohiro.aota@wdc.com scsi: target: pscsi: Fix bio_put() for error case
Martin K. Petersen martin.petersen@oracle.com scsi: sd: usb_storage: uas: Access media prior to querying device properties
Robert Richter rrichter@amd.com cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
Li Ming ming4.li@intel.com cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
Dan Williams dan.j.williams@intel.com cxl/acpi: Fix load failures due to single window creation failure
Mikulas Patocka mpatocka@redhat.com dm-verity: recheck the hash after a failure
Mikulas Patocka mpatocka@redhat.com dm-crypt: don't modify the data when using authenticated encryption
Mikulas Patocka mpatocka@redhat.com dm-integrity: recheck the integrity tag after a failure
Helge Deller deller@gmx.de Revert "parisc: Only list existing CPUs in cpu_possible_mask"
Mikulas Patocka mpatocka@redhat.com dm-crypt: recheck the integrity tag after a failure
Guenter Roeck linux@roeck-us.net lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
Bart Van Assche bvanassche@acm.org fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
Damien Le Moal dlemoal@kernel.org ata: libata-core: Do not call ata_dev_power_set_standby() twice
Damien Le Moal dlemoal@kernel.org ata: libata-core: Do not try to set sleeping devices to standby
Peter Oberparleiter oberpar@linux.ibm.com s390/cio: fix invalid -EBUSY on ccw_device_start
Ma Jun Jun.Ma2@amd.com drm/amdgpu: Fix the runtime resume failure issue
Wayne Lin wayne.lin@amd.com drm/amd/display: adjust few initialization order in dm
Lewis Huang lewis.huang@amd.com drm/amd/display: Only allow dig mapping to pwrseq in new asic
Arunpravin Paneer Selvam Arunpravin.PaneerSelvam@amd.com drm/buddy: Modify duplicate list_splice_tail call
Martin Blumenstingl martin.blumenstingl@googlemail.com drm/meson: Don't remove bridges which are created by other drivers
Thomas Hellström thomas.hellstrom@linux.intel.com drm/ttm: Fix an invalid freeing on already freed page in error path
Qu Wenruo wqu@suse.com btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
Huacai Chen chenhuacai@kernel.org LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
Huacai Chen chenhuacai@kernel.org LoongArch: Disable IRQ before init_fn() for nonboot CPUs
Huacai Chen chenhuacai@kernel.org LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
Jonathan Corbet corbet@lwn.net docs: Instruct LaTeX to cope with deeper nesting
Pawan Gupta pawan.kumar.gupta@linux.intel.com x86/bugs: Add asm helpers for executing VERW
David Gow davidgow@google.com kunit: Add a macro to wrap a deferred action function
Daniel Vacek neelx@redhat.com IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
Sohaib Nadeem sohaib.nadeem@amd.com drm/amd/display: fixed integer types and null check locations
Peichen Huang peichen.huang@amd.com drm/amd/display: Request usb4 bw for mst streams
Meenakshikumar Somasundaram meenakshikumar.somasundaram@amd.com drm/amd/display: Add dpia display mode validation logic
Paolo Abeni pabeni@redhat.com mptcp: corner case locking for rx path fields initialization
Paolo Abeni pabeni@redhat.com mptcp: fix more tx path fields initialization
Geliang Tang geliang.tang@linux.dev mptcp: use mptcp_set_state
Geliang Tang geliang.tang@linux.dev mptcp: add CurrEstab MIB counter support
Steve French stfrench@microsoft.com smb3: clarify mount warning
Shyam Prasad N sprasad@microsoft.com cifs: handle cases where multiple sessions share connection
Shyam Prasad N sprasad@microsoft.com cifs: change tcon status when need_reconnect is set on it
Yi Sun yi.sun@unisoc.com virtio-blk: Ensure no requests in virtqueues before deleting vqs.
Paulo Alcantara pc@manguebit.com smb: client: set correct d_type for reparse points under DFS mounts
Lijo Lazar lijo.lazar@amd.com drm/amdgpu: Fix HDP flush for VFs on nbio v7.9
Stanley.Yang Stanley.Yang@amd.com drm/amdgpu: Fix shared buff copy to user
Prike Liang Prike.Liang@amd.com drm/amdgpu: reset gpu for s3 suspend abort case
Prike Liang Prike.Liang@amd.com drm/amdgpu: skip to program GFXDEC registers for suspend abort
Xiubo Li xiubli@redhat.com ceph: always check dir caps asynchronously
Xiubo Li xiubli@redhat.com libceph: fail sparse-read if the data length doesn't match
Takashi Sakamoto o-takashi@sakamocchi.jp firewire: core: send bus reset promptly on gap count error
Krystian Pradzynski krystian.pradzynski@intel.com accel/ivpu/40xx: Stop passing SKU boot parameters to FW
Jacek Lawrynowicz jacek.lawrynowicz@linux.intel.com accel/ivpu: Disable d3hot_delay on all NPU generations
Wachowski, Karol karol.wachowski@intel.com accel/ivpu: Force snooping for MMU writes
Kees Cook keescook@chromium.org LoongArch: vDSO: Disable UBSAN instrumentation
Huacai Chen chenhuacai@kernel.org LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC]
Masahiro Yamada masahiroy@kernel.org LoongArch: Select HAVE_ARCH_SECCOMP to use the common SECCOMP menu
Masahiro Yamada masahiroy@kernel.org LoongArch: Select ARCH_ENABLE_THP_MIGRATION instead of redefining it
SEO HOYOUNG hy50.seo@samsung.com scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()
Alice Chao alice.chao@mediatek.com scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()
Hannes Reinecke hare@suse.de scsi: lpfc: Use unsigned type for num_sge
Timur Tabi ttabi@nvidia.com drm/nouveau: nvkm_gsp_radix3_sg() should use nvkm_gsp_mem_ctor()
Zhang Rui rui.zhang@intel.com hwmon: (coretemp) Enlarge per package core count limit
Andrew Bresticker abrestic@rivosinc.com efi: Don't add memblocks for soft-reserved memory
Andrew Bresticker abrestic@rivosinc.com efi: runtime: Fix potential overflow of soft-reserved region size
Benjamin Berg benjamin.berg@intel.com wifi: iwlwifi: do not announce EPCS support
Johannes Berg johannes.berg@intel.com wifi: mac80211: accept broadcast probe responses on 6 GHz
Johannes Berg johannes.berg@intel.com wifi: mac80211: adding missing drv_mgd_complete_tx() call
Johannes Berg johannes.berg@intel.com wifi: mac80211: initialize SMPS mode correctly
Johannes Berg johannes.berg@intel.com wifi: mac80211: fix driver debugfs for vif type change
Johannes Berg johannes.berg@intel.com wifi: mac80211: set station RX-NSS on reconfig
Edward Adam Davis eadavis@qq.com fs/ntfs3: Fix oob in ntfs_listxattr
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Update inode->i_size after success write into compressed file
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fixed overflow check in mi_enum_attr()
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct function is_rst_area_valid
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Use i_size_read and i_size_write
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Prevent generic message "attempt to access beyond end of device"
Ism Hong ism.hong@gmail.com fs/ntfs3: use non-movable memory for ntfs3 MFT buffer cache
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Use kvfree to free memory allocated by kvmalloc
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Disable ATTR_LIST_ENTRY size check
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix c/mtime typo
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add NULL ptr dereference checking at the end of attr_allocate_frame()
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add and fix comments
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: ntfs3_forced_shutdown use int instead of bool
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Implement super_operations::shutdown
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Drop suid and sgid bits as a part of fpunch
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Add file_modified
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct use bh_read
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix detected field-spanning write (size 8) of single field "le->name"
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Fix multithreaded stress test
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Reduce stack usage
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Print warning while fixing hard links count
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Correct hard links updating when dealing with DOS names
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Improve ntfs_dir_count
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Modified fix directory element type detection
Konstantin Komarov almaz.alexandrovich@paragon-software.com fs/ntfs3: Improve alternative boot processing
Szilard Fabian szfabian@bluemarch.art Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table
Zhang Yi yi.zhang@huawei.com ext4: correct the hole length returned by ext4_map_blocks()
Paulo Alcantara pc@manguebit.com smb: client: increase number of PDUs allowed in a compound request
Shyam Prasad N sprasad@microsoft.com cifs: do not search for channel if server is terminating
Daniel Wagner dwagner@suse.de nvmet-fc: take ref count on tgtport before delete assoc
Daniel Wagner dwagner@suse.de nvmet-fc: avoid deadlock on delete association path
Daniel Wagner dwagner@suse.de nvmet-fc: abort command when there is no binding
Daniel Wagner dwagner@suse.de nvmet-fc: hold reference on hostport match
Daniel Wagner dwagner@suse.de nvmet-fc: free queue and assoc directly
Daniel Wagner dwagner@suse.de nvmet-fc: defer cleanup using RCU properly
Daniel Wagner dwagner@suse.de nvmet-fc: release reference on target port
Daniel Wagner dwagner@suse.de nvmet-fcloop: swap the list_add_tail arguments
Daniel Wagner dwagner@suse.de nvme-fc: do not wait in vain when unloading module
Alexander Tsoy alexander@tsoy.me ALSA: usb-audio: Ignore clock selector errors for single connection
Richard Fitzgerald rf@opensource.cirrus.com ASoC: wm_adsp: Don't overwrite fwf_name with the default
Shyam Prasad N sprasad@microsoft.com cifs: make sure that channel scaling is done only once
Dmytro Laktyushkin dmytro.laktyushkin@amd.com drm/amd/display: Fix DPSTREAM CLK on and off sequence
Charlene Liu charlene.liu@amd.com drm/amd/display: fix USB-C flag update after enc10 feature init
Sohaib Nadeem sohaib.nadeem@amd.com drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz
Mukul Joshi mukul.joshi@amd.com drm/amdkfd: Use correct drm device for cgroup permission check
Xin Long lucien.xin@gmail.com netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new
Will Deacon will@kernel.org misc: open-dice: Fix spurious lockdep warning
Brenton Simpson appsforartists@google.com Input: xpad - add Lenovo Legion Go controllers
Wolfram Sang wsa+renesas@sang-engineering.com spi: sh-msiof: avoid integer overflow in constants
Patrick Rudolph patrick.rudolph@9elements.com regulator (max5970): Fix IRQ handler
Chhayly Leang clw.leang@gmail.com ALSA: hda: cs35l41: Support ASUS Zenbook UM3402YAR
Kenzo Gomez kenzo.sgomez@gmail.com ALSA: hda: cs35l41: Support additional ASUS Zenbook UX3402VA
Chen-Yu Tsai wens@csie.org ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616
Alexander Tsoy alexander@tsoy.me ALSA: usb-audio: Check presence of valid altsetting control
Christian A. Ehrhardt lk@c--e.de usb: ucsi_acpi: Quirk to ack a connector change ack cmd
Guixin Liu kanie@linux.alibaba.com nvmet-tcp: fix nvme tcp ida memory leak
Kunwu Chan chentao@kylinos.cn HID: nvidia-shield: Add missing null pointer checks to LED initialization
Rui Salvaterra rsalvaterra@gmail.com ALSA: hda: Increase default bdl_pos_adj for Apollo Lake
Rui Salvaterra rsalvaterra@gmail.com ALSA: hda: Replace numeric device IDs with constant values
Jiri Kosina jikos@kernel.org HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
Martin Blumenstingl martin.blumenstingl@googlemail.com regulator: pwm-regulator: Add validity checks in continuous .get_voltage
Venkata Prasad Potturu venkataprasad.potturu@amd.com ASoC: amd: acp: Add check for cpu dai link initialization
Kunwu Chan chentao@kylinos.cn dmaengine: ti: edma: Add some null pointer checks to the edma_probe
Hans de Goede hdegoede@redhat.com Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0
Baokun Li libaokun1@huawei.com ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()
Baokun Li libaokun1@huawei.com ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()
Baokun Li libaokun1@huawei.com ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt
Phoenix Chen asbeltogf@gmail.com platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
Huang Pei huangpei@loongson.cn MIPS: reserve exception vector space ONLY ONCE
Roman Li Roman.Li@amd.com drm/amd/display: Disable ips before dc interrupt setting
Lukas Wunner lukas@wunner.de ARM: dts: Fix TPM schema violations
Lennert Buytenhek kernel@wantstofly.org ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers
Charles Keepax ckeepax@opensource.cirrus.com spi: cs42l43: Handle error from devm_pm_runtime_enable
Maksim Kiselev bigunclemax@gmail.com aoe: avoid potential deadlock at set_capacity
Conrad Kostecki conikost@gentoo.org ahci: asm1166: correct count of reported ports
Shyam Prasad N sprasad@microsoft.com cifs: helper function to check replayable error codes
Shyam Prasad N sprasad@microsoft.com cifs: translate network errors on send to -ECONNABORTED
Shyam Prasad N sprasad@microsoft.com cifs: cifs_pick_channel should try selecting active channels
Kees Cook keescook@chromium.org smb: Work around Clang __bdos() type confusion
Christian A. Ehrhardt lk@c--e.de block: Fix WARNING in _copy_from_iter
Devyn Liu liudingyuan@huawei.com spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected
Mika Westerberg mika.westerberg@linux.intel.com spi: intel-pci: Add support for Arrow Lake SPI serial flash
Liming Sun limings@nvidia.com platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
Fullway Wang fullwaywang@outlook.com fbdev: sis: Error out if pixclock equals zero
Fullway Wang fullwaywang@outlook.com fbdev: savage: Error out if pixclock equals zero
Felix Fietkau nbd@nbd.name wifi: mac80211: fix race condition on enabling fast-xmit
Michal Kazior michal@plume.com wifi: cfg80211: fix missing interfaces when dumping
Vinod Koul vkoul@kernel.org dmaengine: dw-edma: increase size of 'name' in debugfs code
Vinod Koul vkoul@kernel.org dmaengine: fsl-qdma: increase size of 'irq_name'
Vinod Koul vkoul@kernel.org dmaengine: shdma: increase size of 'dev_id'
Shyam Prasad N sprasad@microsoft.com cifs: open_cached_dir should not rely on primary channel
Dmitry Bogdanov d.bogdanov@yadro.com scsi: target: core: Add TMF to tmr_list handling
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in mm tests
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in vector tests
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in cbo
Christoph Müllner christoph.muellner@vrull.eu tools: selftests: riscv: Fix compile warnings in hwprobe
Mahesh Rajashekhara mahesh.rajashekhara@microchip.com scsi: smartpqi: Fix logical volume rescan race condition
David Strahan david.strahan@microchip.com scsi: smartpqi: Add new controller PCI IDs
Hector Martin marcan@marcan.st dmaengine: apple-admac: Keep upper bits of REG_BUS_WIDTH
Mario Limonciello mario.limonciello@amd.com drm/amd: Stop evicting resources on APUs in suspend
Diffstat:
Documentation/conf.py | 6 + Documentation/dev-tools/kunit/usage.rst | 10 +- Makefile | 4 +- .../dts/aspeed/aspeed-bmc-facebook-bletchley.dts | 4 +- .../dts/aspeed/aspeed-bmc-facebook-wedge400.dts | 4 +- arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 2 +- .../dts/aspeed/ast2600-facebook-netbmc-common.dtsi | 4 +- .../arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi | 2 +- .../boot/dts/nxp/imx/imx7d-flex-concentrator.dts | 2 +- .../dts/ti/omap/am335x-moxa-uc-2100-common.dtsi | 2 +- arch/arm/mach-ep93xx/core.c | 1 + .../dts/freescale/imx8mp-data-modul-edm-sbc.dts | 2 +- .../dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 9 +- arch/arm64/boot/dts/rockchip/px30.dtsi | 2 + .../boot/dts/rockchip/rk3588s-indiedroid-nova.dts | 10 +- arch/arm64/include/asm/fpsimd.h | 2 + arch/arm64/kernel/fpsimd.c | 16 ++ arch/arm64/kernel/suspend.c | 3 + arch/arm64/kvm/vgic/vgic-its.c | 5 + arch/loongarch/Kconfig | 23 +-- arch/loongarch/include/asm/acpi.h | 4 +- arch/loongarch/kernel/acpi.c | 4 +- arch/loongarch/kernel/setup.c | 4 +- arch/loongarch/kernel/smp.c | 122 ++++++----- arch/loongarch/vdso/Makefile | 1 + arch/mips/kernel/traps.c | 8 +- arch/parisc/kernel/processor.c | 8 - arch/parisc/kernel/unwind.c | 14 +- arch/powerpc/include/asm/ppc-pci.h | 10 + arch/powerpc/kernel/iommu.c | 23 ++- arch/powerpc/kvm/book3s_hv.c | 26 ++- arch/powerpc/kvm/book3s_hv_nestedv2.c | 20 +- arch/powerpc/platforms/pseries/pci_dlpar.c | 4 + arch/s390/pci/pci.c | 2 +- arch/sparc/Makefile | 2 +- arch/sparc/video/Makefile | 2 +- arch/x86/entry/entry.S | 23 +++ arch/x86/include/asm/cpufeatures.h | 2 +- arch/x86/include/asm/nospec-branch.h | 13 ++ arch/x86/kernel/traps.c | 2 +- arch/x86/mm/numa.c | 21 +- block/blk-map.c | 13 +- drivers/accel/ivpu/ivpu_drv.c | 5 +- drivers/accel/ivpu/ivpu_hw_37xx.c | 2 +- drivers/accel/ivpu/ivpu_hw_40xx.c | 9 +- drivers/accel/ivpu/ivpu_mmu.c | 3 - drivers/ata/ahci.c | 44 +++- drivers/ata/ahci.h | 1 + drivers/ata/ahci_ceva.c | 125 ++++++----- drivers/ata/libata-core.c | 87 ++++---- drivers/block/aoe/aoeblk.c | 5 +- drivers/block/virtio_blk.c | 7 +- drivers/bus/imx-weim.c | 2 +- drivers/cache/ax45mp_cache.c | 4 + .../crypto/virtio/virtio_crypto_akcipher_algs.c | 5 +- drivers/cxl/acpi.c | 46 +++-- drivers/cxl/core/pci.c | 49 +++-- drivers/dma/apple-admac.c | 5 +- drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 4 +- drivers/dma/dw-edma/dw-hdma-v0-debugfs.c | 4 +- drivers/dma/fsl-qdma.c | 2 +- drivers/dma/sh/shdma.h | 2 +- drivers/dma/ti/edma.c | 10 + drivers/firewire/core-card.c | 18 +- drivers/firmware/efi/arm-runtime.c | 2 +- drivers/firmware/efi/efi-init.c | 19 +- drivers/firmware/efi/riscv-runtime.c | 2 +- drivers/gpio/gpiolib.c | 5 + drivers/gpu/drm/amd/amdgpu/amdgpu.h | 4 + drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c | 18 ++ drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 11 +- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 + drivers/gpu/drm/amd/amdgpu/amdgpu_psp_ta.c | 2 +- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 8 + drivers/gpu/drm/amd/amdgpu/nbio_v7_9.c | 6 + drivers/gpu/drm/amd/amdgpu/soc15.c | 22 ++ drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 9 +- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 57 +++--- .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_irq.c | 5 +- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 16 +- .../gpu/drm/amd/display/dc/core/dc_link_exports.c | 2 +- drivers/gpu/drm/amd/display/dc/dc.h | 4 +- drivers/gpu/drm/amd/display/dc/dc_dmub_srv.c | 7 +- drivers/gpu/drm/amd/display/dc/dc_dp_types.h | 6 + drivers/gpu/drm/amd/display/dc/dc_types.h | 14 +- .../gpu/drm/amd/display/dc/dce/dce_panel_cntl.c | 1 + .../drm/amd/display/dc/dcn301/dcn301_panel_cntl.c | 1 + .../drm/amd/display/dc/dcn31/dcn31_panel_cntl.c | 18 +- .../amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 4 +- .../amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 +- .../drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 2 +- .../drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 11 +- drivers/gpu/drm/amd/display/dc/inc/hw/panel_cntl.h | 2 +- drivers/gpu/drm/amd/display/dc/link/link_dpms.c | 42 +++- drivers/gpu/drm/amd/display/dc/link/link_factory.c | 26 +-- .../gpu/drm/amd/display/dc/link/link_validation.c | 60 +++++- .../display/dc/link/protocols/link_dp_dpia_bw.c | 178 ++++++++++++---- .../display/dc/link/protocols/link_dp_dpia_bw.h | 9 + drivers/gpu/drm/drm_buddy.c | 4 +- drivers/gpu/drm/drm_syncobj.c | 19 +- drivers/gpu/drm/i915/display/intel_sdvo.c | 10 +- drivers/gpu/drm/i915/display/intel_tv.c | 10 +- drivers/gpu/drm/meson/meson_encoder_cvbs.c | 1 - drivers/gpu/drm/meson/meson_encoder_dsi.c | 1 - drivers/gpu/drm/meson/meson_encoder_hdmi.c | 1 - drivers/gpu/drm/nouveau/nvkm/subdev/bar/r535.c | 5 +- drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c | 8 +- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 18 +- drivers/gpu/drm/ttm/ttm_pool.c | 2 +- drivers/hid/hid-logitech-hidpp.c | 2 + drivers/hid/hid-nvidia-shield.c | 4 + drivers/hwmon/coretemp.c | 2 +- drivers/hwmon/nct6775-core.c | 14 +- drivers/i2c/busses/i2c-imx.c | 5 + drivers/infiniband/hw/bnxt_re/ib_verbs.c | 5 +- drivers/infiniband/hw/bnxt_re/qplib_fp.c | 3 +- drivers/infiniband/hw/hfi1/pio.c | 6 +- drivers/infiniband/hw/hfi1/sdma.c | 2 +- drivers/infiniband/hw/irdma/defs.h | 1 + drivers/infiniband/hw/irdma/hw.c | 8 + drivers/infiniband/hw/irdma/verbs.c | 9 +- drivers/infiniband/hw/mlx5/cong.c | 6 + drivers/infiniband/hw/qedr/verbs.c | 11 +- drivers/infiniband/ulp/srpt/ib_srpt.c | 17 +- drivers/input/joystick/xpad.c | 2 + drivers/input/serio/i8042-acpipnpio.h | 8 + drivers/input/touchscreen/goodix.c | 3 +- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 45 ++-- drivers/iommu/intel/iommu.c | 87 ++++++-- drivers/iommu/intel/iommu.h | 7 + drivers/iommu/intel/nested.c | 14 +- drivers/iommu/intel/pasid.c | 5 +- drivers/iommu/intel/pasid.h | 1 - drivers/iommu/iommu-sva.c | 2 +- drivers/iommu/iommufd/hw_pagetable.c | 3 +- drivers/iommu/iommufd/iova_bitmap.c | 68 +++++- drivers/irqchip/irq-gic-v3-its.c | 2 +- drivers/irqchip/irq-mbigen.c | 8 +- drivers/irqchip/irq-sifive-plic.c | 8 +- drivers/md/dm-crypt.c | 95 +++++++-- drivers/md/dm-integrity.c | 91 +++++++- drivers/md/dm-verity-target.c | 86 +++++++- drivers/md/dm-verity.h | 6 + drivers/md/md.c | 70 ++++--- drivers/md/raid10.c | 16 +- drivers/md/raid5.c | 29 +-- drivers/misc/open-dice.c | 2 +- drivers/net/ethernet/adi/Kconfig | 1 + drivers/net/ethernet/broadcom/asp2/bcmasp.c | 6 +- drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c | 3 + .../net/ethernet/marvell/octeontx2/af/rvu_npc.c | 4 + .../net/ethernet/microchip/sparx5/sparx5_main.c | 1 + .../net/ethernet/microchip/sparx5/sparx5_main.h | 1 + .../net/ethernet/microchip/sparx5/sparx5_packet.c | 2 + drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 20 -- drivers/net/gtp.c | 10 +- drivers/net/ipa/ipa_interrupt.c | 2 +- drivers/net/phy/realtek.c | 4 +- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 5 +- drivers/nvme/host/fc.c | 47 +---- drivers/nvme/target/fc.c | 137 +++++++------ drivers/nvme/target/fcloop.c | 6 +- drivers/nvme/target/tcp.c | 1 + drivers/pci/msi/irqdomain.c | 2 +- drivers/platform/mellanox/mlxbf-tmfifo.c | 67 ++++++ drivers/platform/x86/intel/vbtn.c | 3 - drivers/platform/x86/think-lmi.c | 20 +- drivers/platform/x86/thinkpad_acpi.c | 5 +- drivers/platform/x86/touchscreen_dmi.c | 39 +++- drivers/platform/x86/x86-android-tablets/core.c | 3 + drivers/platform/x86/x86-android-tablets/lenovo.c | 1 + .../x86/x86-android-tablets/x86-android-tablets.h | 1 + drivers/regulator/max5970-regulator.c | 2 +- drivers/regulator/pwm-regulator.c | 3 + drivers/s390/cio/device_ops.c | 6 +- drivers/scsi/Kconfig | 2 +- drivers/scsi/lpfc/lpfc_scsi.c | 12 +- drivers/scsi/scsi.c | 22 +- drivers/scsi/sd.c | 26 ++- drivers/scsi/smartpqi/smartpqi.h | 1 - drivers/scsi/smartpqi/smartpqi_init.c | 88 +++++++- drivers/spi/spi-cs42l43.c | 5 +- drivers/spi/spi-hisi-sfc-v3xx.c | 5 + drivers/spi/spi-intel-pci.c | 1 + drivers/spi/spi-sh-msiof.c | 16 +- drivers/target/target_core_device.c | 5 - drivers/target/target_core_pscsi.c | 9 +- drivers/target/target_core_transport.c | 4 + drivers/tty/serial/amba-pl011.c | 60 +++--- drivers/tty/serial/stm32-usart.c | 4 +- drivers/ufs/core/ufshcd.c | 7 +- drivers/usb/cdns3/cdns3-gadget.c | 8 +- drivers/usb/cdns3/core.c | 1 - drivers/usb/cdns3/drd.c | 13 +- drivers/usb/cdns3/drd.h | 6 +- drivers/usb/cdns3/host.c | 16 +- drivers/usb/dwc3/gadget.c | 5 + drivers/usb/gadget/function/f_ncm.c | 10 +- drivers/usb/gadget/udc/omap_udc.c | 3 +- drivers/usb/roles/class.c | 29 ++- drivers/usb/storage/scsiglue.c | 7 + drivers/usb/storage/uas.c | 7 + drivers/usb/typec/tcpm/tcpm.c | 3 - drivers/usb/typec/ucsi/ucsi_acpi.c | 71 ++++++- drivers/video/fbdev/savage/savagefb_driver.c | 3 + drivers/video/fbdev/sis/sis_main.c | 2 + fs/afs/volume.c | 4 +- fs/aio.c | 9 +- fs/btrfs/defrag.c | 2 +- fs/cachefiles/cache.c | 2 + fs/cachefiles/daemon.c | 1 + fs/ceph/caps.c | 6 - fs/ceph/mds_client.c | 9 +- fs/ceph/mds_client.h | 2 +- fs/ceph/super.h | 2 - fs/erofs/namei.c | 28 +-- fs/ext4/extents.c | 111 ++++++---- fs/ext4/mballoc.c | 15 +- fs/ntfs3/attrib.c | 45 ++-- fs/ntfs3/attrlist.c | 12 +- fs/ntfs3/bitmap.c | 4 +- fs/ntfs3/dir.c | 44 ++-- fs/ntfs3/file.c | 72 +++++-- fs/ntfs3/frecord.c | 19 +- fs/ntfs3/fslog.c | 228 ++++++++++----------- fs/ntfs3/fsntfs.c | 29 ++- fs/ntfs3/index.c | 8 +- fs/ntfs3/inode.c | 32 ++- fs/ntfs3/namei.c | 12 ++ fs/ntfs3/ntfs.h | 4 +- fs/ntfs3/ntfs_fs.h | 25 +-- fs/ntfs3/record.c | 18 +- fs/ntfs3/super.c | 49 +++-- fs/ntfs3/xattr.c | 6 + fs/smb/client/cached_dir.c | 3 +- fs/smb/client/cifsencrypt.c | 2 +- fs/smb/client/cifsglob.h | 12 +- fs/smb/client/connect.c | 11 + fs/smb/client/dfs.c | 7 +- fs/smb/client/file.c | 3 + fs/smb/client/fs_context.c | 2 +- fs/smb/client/readdir.c | 15 +- fs/smb/client/sess.c | 5 +- fs/smb/client/smb2pdu.c | 26 ++- fs/smb/client/transport.c | 18 +- include/kunit/resource.h | 21 ++ include/linux/ceph/osd_client.h | 3 +- include/linux/fs.h | 2 + include/linux/iommu.h | 12 ++ include/linux/memblock.h | 2 + include/linux/mlx5/mlx5_ifc.h | 2 +- include/linux/swap.h | 5 + include/net/netfilter/nf_flow_table.h | 2 +- include/net/switchdev.h | 3 + include/net/tcp.h | 2 +- include/scsi/scsi_device.h | 5 +- kernel/bpf/helpers.c | 5 +- lib/Kconfig.debug | 1 + lib/kunit/kunit-test.c | 5 +- lib/kunit/test.c | 6 +- mm/damon/core.c | 15 +- mm/damon/lru_sort.c | 43 +++- mm/damon/reclaim.c | 18 +- mm/memblock.c | 6 +- mm/memcontrol.c | 10 +- mm/memory.c | 20 ++ mm/swap.h | 5 + mm/swapfile.c | 13 ++ mm/zswap.c | 7 +- net/bridge/br_switchdev.c | 86 +++++--- net/ceph/osd_client.c | 18 +- net/core/skmsg.c | 7 +- net/core/sock.c | 23 +-- net/devlink/core.c | 12 +- net/devlink/port.c | 2 +- net/ipv4/arp.c | 3 +- net/ipv4/devinet.c | 21 +- net/ipv4/inet_hashtables.c | 25 ++- net/ipv4/udp.c | 7 +- net/ipv6/addrconf.c | 21 +- net/ipv6/exthdrs.c | 10 + net/ipv6/seg6.c | 20 +- net/l2tp/l2tp_ip6.c | 2 +- net/mac80211/cfg.c | 2 + net/mac80211/debugfs_netdev.c | 4 +- net/mac80211/debugfs_netdev.h | 5 - net/mac80211/iface.c | 2 +- net/mac80211/mlme.c | 8 +- net/mac80211/scan.c | 30 +-- net/mac80211/sta_info.c | 2 + net/mac80211/tx.c | 2 +- net/mctp/route.c | 2 +- net/mptcp/diag.c | 8 +- net/mptcp/fastopen.c | 6 +- net/mptcp/mib.c | 1 + net/mptcp/mib.h | 8 + net/mptcp/options.c | 9 +- net/mptcp/pm_netlink.c | 74 ++++--- net/mptcp/pm_userspace.c | 15 +- net/mptcp/protocol.c | 69 ++++--- net/mptcp/protocol.h | 25 ++- net/mptcp/subflow.c | 86 +++++--- net/netfilter/nf_conntrack_proto_sctp.c | 2 +- net/netfilter/nf_flow_table_core.c | 17 +- net/netfilter/nf_tables_api.c | 81 ++++---- net/phonet/datagram.c | 4 +- net/phonet/pep.c | 41 +++- net/sched/act_mirred.c | 147 ++++++------- net/sched/cls_flower.c | 5 +- net/switchdev/switchdev.c | 73 +++++++ net/tls/tls_main.c | 2 +- net/tls/tls_sw.c | 24 ++- net/unix/af_unix.c | 19 +- net/wireless/nl80211.c | 1 + net/xdp/xsk.c | 3 +- scripts/bpf_doc.py | 2 +- sound/pci/hda/cs35l41_hda_property.c | 4 + sound/pci/hda/hda_intel.c | 6 +- sound/soc/amd/acp/acp-mach-common.c | 9 +- sound/soc/codecs/wm_adsp.c | 29 ++- sound/soc/sunxi/sun4i-spdif.c | 5 + sound/usb/clock.c | 10 +- sound/usb/format.c | 20 ++ tools/net/ynl/lib/ynl.c | 19 +- .../selftests/drivers/net/bonding/bond_options.sh | 2 + tools/testing/selftests/iommu/config | 5 +- tools/testing/selftests/mm/uffd-unit-tests.c | 6 + .../testing/selftests/net/forwarding/tc_actions.sh | 3 - tools/testing/selftests/net/mptcp/diag.sh | 46 ++++- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 41 ++-- tools/testing/selftests/net/mptcp/mptcp_join.sh | 109 ++++------ tools/testing/selftests/net/mptcp/mptcp_lib.sh | 16 ++ tools/testing/selftests/net/mptcp/pm_netlink.sh | 8 +- tools/testing/selftests/net/mptcp/simult_flows.sh | 3 +- tools/testing/selftests/net/mptcp/userspace_pm.sh | 18 +- tools/testing/selftests/riscv/hwprobe/cbo.c | 6 +- tools/testing/selftests/riscv/hwprobe/hwprobe.c | 4 +- tools/testing/selftests/riscv/mm/mmap_test.h | 3 + .../selftests/riscv/vector/v_initval_nolibc.c | 2 +- .../testing/selftests/riscv/vector/vstate_prctl.c | 4 +- 340 files changed, 3847 insertions(+), 1826 deletions(-)
On Tuesday, February 27, 2024 18:47 IST, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 6.7.7 release. There are 334 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Thu, 29 Feb 2024 13:15:36 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.7.7-rc1.g... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.7.y and the diffstat can be found below.
KernelCI report for stable-rc/linux-6.7.y for this week :-
## stable-rc HEAD for linux-6.7.y:
Date: 2024-02-27 https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/l...
## Build failures: No build failures seen for the stable-rc/linux-6.7.y commit head \o/
## Boot failures: No **new** boot failures seen for the stable-rc/linux-6.7.y commit head \o/
Tested-by: kernelci.org bot bot@kernelci.org
Thanks, Shreeya Patel
linux-stable-mirror@lists.linaro.org