From: Tobias Schramm t.schramm@manjaro.org
[ Upstream commit ae1ba50f1e706dfd7ce402ac52c1f1f10becad68 ]
Previously the stm32h7 interrupt thread cleared all non-masked interrupts. If an interrupt was to occur during the handling of another interrupt its flag would be unset, resulting in a lost interrupt. This patches fixes the issue by clearing only the currently set interrupt flags.
Signed-off-by: Tobias Schramm t.schramm@manjaro.org Link: https://lore.kernel.org/r/20200804195136.1485392-1-t.schramm@manjaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 44ac6eb3298d4..ef3be03574e80 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -964,7 +964,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) if (!spi->cur_usedma && (spi->rx_buf && (spi->rx_len > 0))) stm32h7_spi_read_rxfifo(spi, false);
- writel_relaxed(mask, spi->base + STM32H7_SPI_IFCR); + writel_relaxed(sr & mask, spi->base + STM32H7_SPI_IFCR);
spin_unlock_irqrestore(&spi->lock, flags);
From: Lukas Czerner lczerner@redhat.com
[ Upstream commit 24dc9864914eb5813173cfa53313fcd02e4aea7d ]
Callers of __jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() assume that the b_transaction is set. In fact if it's not, we can end up with journal_head refcounting errors leading to crash much later that might be very hard to track down. Add asserts to make sure that is the case.
We also make sure that b_next_transaction is NULL in __jbd2_journal_unfile_buffer() since the callers expect that as well and we should not get into that stage in this state anyway, leading to problems later on if we do.
Tested with fstests.
Signed-off-by: Lukas Czerner lczerner@redhat.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/transaction.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index e91aad3637a23..e65e0aca28261 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -2026,6 +2026,9 @@ static void __jbd2_journal_temp_unlink_buffer(struct journal_head *jh) */ static void __jbd2_journal_unfile_buffer(struct journal_head *jh) { + J_ASSERT_JH(jh, jh->b_transaction != NULL); + J_ASSERT_JH(jh, jh->b_next_transaction == NULL); + __jbd2_journal_temp_unlink_buffer(jh); jh->b_transaction = NULL; } @@ -2572,6 +2575,13 @@ bool __jbd2_journal_refile_buffer(struct journal_head *jh)
was_dirty = test_clear_buffer_jbddirty(bh); __jbd2_journal_temp_unlink_buffer(jh); + + /* + * b_transaction must be set, otherwise the new b_transaction won't + * be holding jh reference + */ + J_ASSERT_JH(jh, jh->b_transaction != NULL); + /* * We set b_transaction here because b_next_transaction will inherit * our jh reference and thus __jbd2_journal_file_buffer() must not
From: Jan Kara jack@suse.cz
[ Upstream commit 11215630aada28307ba555a43138db6ac54fa825 ]
A customer has reported a BUG_ON in ext4_clear_journal_err() hitting during an LTP testing. Either this has been caused by a test setup issue where the filesystem was being overwritten while LTP was mounting it or the journal replay has overwritten the superblock with invalid data. In either case it is preferable we don't take the machine down with a BUG_ON. So handle the situation of unexpectedly missing has_journal feature more gracefully. We issue warning and fail the mount in the cases where the race window is narrow and the failed check is most likely a programming error. In cases where fs corruption is more likely, we do full ext4_error() handling before failing mount / remount.
Reviewed-by: Lukas Czerner lczerner@redhat.com Signed-off-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20200710140759.18031-1-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 68 ++++++++++++++++++++++++++++++++++--------------- 1 file changed, 47 insertions(+), 21 deletions(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 7318ca71b69eb..f1b975ff210c4 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -66,10 +66,10 @@ static int ext4_load_journal(struct super_block *, struct ext4_super_block *, unsigned long journal_devnum); static int ext4_show_options(struct seq_file *seq, struct dentry *root); static int ext4_commit_super(struct super_block *sb, int sync); -static void ext4_mark_recovery_complete(struct super_block *sb, +static int ext4_mark_recovery_complete(struct super_block *sb, struct ext4_super_block *es); -static void ext4_clear_journal_err(struct super_block *sb, - struct ext4_super_block *es); +static int ext4_clear_journal_err(struct super_block *sb, + struct ext4_super_block *es); static int ext4_sync_fs(struct super_block *sb, int wait); static int ext4_remount(struct super_block *sb, int *flags, char *data); static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf); @@ -4675,7 +4675,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS; if (needs_recovery) { ext4_msg(sb, KERN_INFO, "recovery complete"); - ext4_mark_recovery_complete(sb, es); + err = ext4_mark_recovery_complete(sb, es); + if (err) + goto failed_mount8; } if (EXT4_SB(sb)->s_journal) { if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) @@ -4718,10 +4720,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem"); goto failed_mount;
-#ifdef CONFIG_QUOTA failed_mount8: ext4_unregister_sysfs(sb); -#endif failed_mount7: ext4_unregister_li_request(sb); failed_mount6: @@ -4860,7 +4860,8 @@ static journal_t *ext4_get_journal(struct super_block *sb, struct inode *journal_inode; journal_t *journal;
- BUG_ON(!ext4_has_feature_journal(sb)); + if (WARN_ON_ONCE(!ext4_has_feature_journal(sb))) + return NULL;
journal_inode = ext4_get_journal_inode(sb, journal_inum); if (!journal_inode) @@ -4890,7 +4891,8 @@ static journal_t *ext4_get_dev_journal(struct super_block *sb, struct ext4_super_block *es; struct block_device *bdev;
- BUG_ON(!ext4_has_feature_journal(sb)); + if (WARN_ON_ONCE(!ext4_has_feature_journal(sb))) + return NULL;
bdev = ext4_blkdev_get(j_dev, sb); if (bdev == NULL) @@ -4982,7 +4984,8 @@ static int ext4_load_journal(struct super_block *sb, int err = 0; int really_read_only;
- BUG_ON(!ext4_has_feature_journal(sb)); + if (WARN_ON_ONCE(!ext4_has_feature_journal(sb))) + return -EFSCORRUPTED;
if (journal_devnum && journal_devnum != le32_to_cpu(es->s_journal_dev)) { @@ -5052,7 +5055,12 @@ static int ext4_load_journal(struct super_block *sb, }
EXT4_SB(sb)->s_journal = journal; - ext4_clear_journal_err(sb, es); + err = ext4_clear_journal_err(sb, es); + if (err) { + EXT4_SB(sb)->s_journal = NULL; + jbd2_journal_destroy(journal); + return err; + }
if (!really_read_only && journal_devnum && journal_devnum != le32_to_cpu(es->s_journal_dev)) { @@ -5148,26 +5156,32 @@ static int ext4_commit_super(struct super_block *sb, int sync) * remounting) the filesystem readonly, then we will end up with a * consistent fs on disk. Record that fact. */ -static void ext4_mark_recovery_complete(struct super_block *sb, - struct ext4_super_block *es) +static int ext4_mark_recovery_complete(struct super_block *sb, + struct ext4_super_block *es) { + int err; journal_t *journal = EXT4_SB(sb)->s_journal;
if (!ext4_has_feature_journal(sb)) { - BUG_ON(journal != NULL); - return; + if (journal != NULL) { + ext4_error(sb, "Journal got removed while the fs was " + "mounted!"); + return -EFSCORRUPTED; + } + return 0; } jbd2_journal_lock_updates(journal); - if (jbd2_journal_flush(journal) < 0) + err = jbd2_journal_flush(journal); + if (err < 0) goto out;
if (ext4_has_feature_journal_needs_recovery(sb) && sb_rdonly(sb)) { ext4_clear_feature_journal_needs_recovery(sb); ext4_commit_super(sb, 1); } - out: jbd2_journal_unlock_updates(journal); + return err; }
/* @@ -5175,14 +5189,17 @@ static void ext4_mark_recovery_complete(struct super_block *sb, * has recorded an error from a previous lifetime, move that error to the * main filesystem now. */ -static void ext4_clear_journal_err(struct super_block *sb, +static int ext4_clear_journal_err(struct super_block *sb, struct ext4_super_block *es) { journal_t *journal; int j_errno; const char *errstr;
- BUG_ON(!ext4_has_feature_journal(sb)); + if (!ext4_has_feature_journal(sb)) { + ext4_error(sb, "Journal got removed while the fs was mounted!"); + return -EFSCORRUPTED; + }
journal = EXT4_SB(sb)->s_journal;
@@ -5207,6 +5224,7 @@ static void ext4_clear_journal_err(struct super_block *sb, jbd2_journal_clear_err(journal); jbd2_journal_update_sb_errno(journal); } + return 0; }
/* @@ -5477,8 +5495,13 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) (sbi->s_mount_state & EXT4_VALID_FS)) es->s_state = cpu_to_le16(sbi->s_mount_state);
- if (sbi->s_journal) + if (sbi->s_journal) { + /* + * We let remount-ro finish even if marking fs + * as clean failed... + */ ext4_mark_recovery_complete(sb, es); + } if (sbi->s_mmp_tsk) kthread_stop(sbi->s_mmp_tsk); } else { @@ -5526,8 +5549,11 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) * been changed by e2fsck since we originally mounted * the partition.) */ - if (sbi->s_journal) - ext4_clear_journal_err(sb, es); + if (sbi->s_journal) { + err = ext4_clear_journal_err(sb, es); + if (err) + goto restore_opts; + } sbi->s_mount_state = le16_to_cpu(es->s_state);
err = ext4_setup_super(sb, es, 0);
From: Lukas Czerner lczerner@redhat.com
[ Upstream commit 273108fa5015eeffc4bacfa5ce272af3434b96e4 ]
Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only.
As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on.
Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode.
This can be reproduced easily like this:
mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT
leading to error like this
[ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]---
Signed-off-by: Lukas Czerner lczerner@redhat.com Reviewed-by: Andreas Dilger adilger@dilger.ca Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 51 ++++++++++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 18 deletions(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index f1b975ff210c4..017aecc1393a8 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4983,6 +4983,7 @@ static int ext4_load_journal(struct super_block *sb, dev_t journal_dev; int err = 0; int really_read_only; + int journal_dev_ro;
if (WARN_ON_ONCE(!ext4_has_feature_journal(sb))) return -EFSCORRUPTED; @@ -4995,7 +4996,31 @@ static int ext4_load_journal(struct super_block *sb, } else journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
- really_read_only = bdev_read_only(sb->s_bdev); + if (journal_inum && journal_dev) { + ext4_msg(sb, KERN_ERR, + "filesystem has both journal inode and journal device!"); + return -EINVAL; + } + + if (journal_inum) { + journal = ext4_get_journal(sb, journal_inum); + if (!journal) + return -EINVAL; + } else { + journal = ext4_get_dev_journal(sb, journal_dev); + if (!journal) + return -EINVAL; + } + + journal_dev_ro = bdev_read_only(journal->j_dev); + really_read_only = bdev_read_only(sb->s_bdev) | journal_dev_ro; + + if (journal_dev_ro && !sb_rdonly(sb)) { + ext4_msg(sb, KERN_ERR, + "journal device read-only, try mounting with '-o ro'"); + err = -EROFS; + goto err_out; + }
/* * Are we loading a blank journal or performing recovery after a @@ -5010,27 +5035,14 @@ static int ext4_load_journal(struct super_block *sb, ext4_msg(sb, KERN_ERR, "write access " "unavailable, cannot proceed " "(try mounting with noload)"); - return -EROFS; + err = -EROFS; + goto err_out; } ext4_msg(sb, KERN_INFO, "write access will " "be enabled during recovery"); } }
- if (journal_inum && journal_dev) { - ext4_msg(sb, KERN_ERR, "filesystem has both journal " - "and inode journals!"); - return -EINVAL; - } - - if (journal_inum) { - if (!(journal = ext4_get_journal(sb, journal_inum))) - return -EINVAL; - } else { - if (!(journal = ext4_get_dev_journal(sb, journal_dev))) - return -EINVAL; - } - if (!(journal->j_flags & JBD2_BARRIER)) ext4_msg(sb, KERN_INFO, "barriers disabled");
@@ -5050,8 +5062,7 @@ static int ext4_load_journal(struct super_block *sb,
if (err) { ext4_msg(sb, KERN_ERR, "error loading journal"); - jbd2_journal_destroy(journal); - return err; + goto err_out; }
EXT4_SB(sb)->s_journal = journal; @@ -5071,6 +5082,10 @@ static int ext4_load_journal(struct super_block *sb, }
return 0; + +err_out: + jbd2_journal_destroy(journal); + return err; }
static int ext4_commit_super(struct super_block *sb, int sync)
From: Xin He hexin.op@bytedance.com
[ Upstream commit 836b194d65782aaec4485a07d2aab52d3f698505 ]
Before setting shmem->pages to NULL, kfree() should be called.
Signed-off-by: Xin He hexin.op@bytedance.com Reviewed-by: Qi Liu liuqi.16@bytedance.com Link: http://patchwork.freedesktop.org/patch/msgid/20200722051851.72662-1-hexin.op... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/virtio/virtgpu_object.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/virtio/virtgpu_object.c b/drivers/gpu/drm/virtio/virtgpu_object.c index d9039bb7c5e37..1e65c5ac573b1 100644 --- a/drivers/gpu/drm/virtio/virtgpu_object.c +++ b/drivers/gpu/drm/virtio/virtgpu_object.c @@ -79,6 +79,7 @@ void virtio_gpu_cleanup_object(struct virtio_gpu_object *bo) }
sg_free_table(shmem->pages); + kfree(shmem->pages); shmem->pages = NULL; drm_gem_shmem_unpin(&bo->base.base); }
From: "zhangyi (F)" yi.zhang@huawei.com
[ Upstream commit bc71726c725767205757821df364acff87f92ac5 ]
There is a risk of filesystem inconsistency if we failed to async write back metadata buffer in the background. Because of current buffer's end io procedure is handled by end_buffer_async_write() in the block layer, and it only clear the buffer's uptodate flag and mark the write_io_error flag, so ext4 cannot detect such failure immediately. In most cases of getting metadata buffer (e.g. ext4_read_inode_bitmap()), although the buffer's data is actually uptodate, it may still read data from disk because the buffer's uptodate flag has been cleared. Finally, it may lead to on-disk filesystem inconsistency if reading old data from the disk successfully and write them out again.
This patch detect bdev mapping->wb_err when getting journal's write access and mark the filesystem error if bdev's mapping->wb_err was increased, this could prevent further writing and potential inconsistency.
Signed-off-by: zhangyi (F) yi.zhang@huawei.com Suggested-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20200620025427.1756360-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/ext4.h | 3 +++ fs/ext4/ext4_jbd2.c | 25 +++++++++++++++++++++++++ fs/ext4/super.c | 17 +++++++++++++++++ 3 files changed, 45 insertions(+)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 51a85b50033a7..ba9971b446b51 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1560,6 +1560,9 @@ struct ext4_sb_info { #ifdef CONFIG_EXT4_DEBUG unsigned long s_simulate_fail; #endif + /* Record the errseq of the backing block device */ + errseq_t s_bdev_wb_err; + spinlock_t s_bdev_wb_lock; };
static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb) diff --git a/fs/ext4/ext4_jbd2.c b/fs/ext4/ext4_jbd2.c index 0c76cdd44d90d..760b9ee49dc00 100644 --- a/fs/ext4/ext4_jbd2.c +++ b/fs/ext4/ext4_jbd2.c @@ -195,6 +195,28 @@ static void ext4_journal_abort_handle(const char *caller, unsigned int line, jbd2_journal_abort_handle(handle); }
+static void ext4_check_bdev_write_error(struct super_block *sb) +{ + struct address_space *mapping = sb->s_bdev->bd_inode->i_mapping; + struct ext4_sb_info *sbi = EXT4_SB(sb); + int err; + + /* + * If the block device has write error flag, it may have failed to + * async write out metadata buffers in the background. In this case, + * we could read old data from disk and write it out again, which + * may lead to on-disk filesystem inconsistency. + */ + if (errseq_check(&mapping->wb_err, READ_ONCE(sbi->s_bdev_wb_err))) { + spin_lock(&sbi->s_bdev_wb_lock); + err = errseq_check_and_advance(&mapping->wb_err, &sbi->s_bdev_wb_err); + spin_unlock(&sbi->s_bdev_wb_lock); + if (err) + ext4_error_err(sb, -err, + "Error while async write back metadata"); + } +} + int __ext4_journal_get_write_access(const char *where, unsigned int line, handle_t *handle, struct buffer_head *bh) { @@ -202,6 +224,9 @@ int __ext4_journal_get_write_access(const char *where, unsigned int line,
might_sleep();
+ if (bh->b_bdev->bd_super) + ext4_check_bdev_write_error(bh->b_bdev->bd_super); + if (ext4_handle_valid(handle)) { err = jbd2_journal_get_write_access(handle, bh); if (err) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 017aecc1393a8..f4d7289462d9b 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4670,6 +4670,15 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) } #endif /* CONFIG_QUOTA */
+ /* + * Save the original bdev mapping's wb_err value which could be + * used to detect the metadata async write error. + */ + spin_lock_init(&sbi->s_bdev_wb_lock); + if (!sb_rdonly(sb)) + errseq_check_and_advance(&sb->s_bdev->bd_inode->i_mapping->wb_err, + &sbi->s_bdev_wb_err); + sb->s_bdev->bd_super = sb; EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS; ext4_orphan_cleanup(sb, es); EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS; @@ -5558,6 +5567,14 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) goto restore_opts; }
+ /* + * Update the original bdev mapping's wb_err value + * which could be used to detect the metadata async + * write error. + */ + errseq_check_and_advance(&sb->s_bdev->bd_inode->i_mapping->wb_err, + &sbi->s_bdev_wb_err); + /* * Mounting a RDONLY partition read-write, so reread * and store the current valid flag. (It may have
From: "zhangyi (F)" yi.zhang@huawei.com
[ Upstream commit c044f3d8360d2ecf831ba2cc9f08cf9fb2c699fb ]
If we free a metadata buffer which has been failed to async write out in the background, the jbd2 checkpoint procedure will not detect this failure in jbd2_log_do_checkpoint(), so it may lead to filesystem inconsistency after cleanup journal tail. This patch abort the journal if free a buffer has write_io_error flag to prevent potential further inconsistency.
Signed-off-by: zhangyi (F) yi.zhang@huawei.com Link: https://lore.kernel.org/r/20200620025427.1756360-5-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jbd2/transaction.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c index e65e0aca28261..6250c9faa4cbe 100644 --- a/fs/jbd2/transaction.c +++ b/fs/jbd2/transaction.c @@ -2120,6 +2120,7 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal, { struct buffer_head *head; struct buffer_head *bh; + bool has_write_io_error = false; int ret = 0;
J_ASSERT(PageLocked(page)); @@ -2144,11 +2145,26 @@ int jbd2_journal_try_to_free_buffers(journal_t *journal, jbd2_journal_put_journal_head(jh); if (buffer_jbd(bh)) goto busy; + + /* + * If we free a metadata buffer which has been failed to + * write out, the jbd2 checkpoint procedure will not detect + * this failure and may lead to filesystem inconsistency + * after cleanup journal tail. + */ + if (buffer_write_io_error(bh)) { + pr_err("JBD2: Error while async write back metadata bh %llu.", + (unsigned long long)bh->b_blocknr); + has_write_io_error = true; + } } while ((bh = bh->b_this_page) != head);
ret = try_to_free_buffers(page);
busy: + if (has_write_io_error) + jbd2_journal_abort(journal, -EIO); + return ret; }
From: Lukas Czerner lczerner@redhat.com
[ Upstream commit f25391ebb475d3ffb3aa61bb90e3594c841749ef ]
Currently there is a problem with mount options that can be both set by vfs using mount flags or by a string parsing in ext4.
i_version/iversion options gets lost after remount, for example
$ mount -o i_version /dev/pmem0 /mnt $ grep pmem0 /proc/self/mountinfo | grep i_version 310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,seclabel,i_version $ mount -o remount,ro /mnt $ grep pmem0 /proc/self/mountinfo | grep i_version
nolazytime gets ignored by ext4 on remount, for example
$ mount -o lazytime /dev/pmem0 /mnt $ grep pmem0 /proc/self/mountinfo | grep lazytime 310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel $ mount -o remount,nolazytime /mnt $ grep pmem0 /proc/self/mountinfo | grep lazytime 310 95 259:0 / /mnt rw,relatime shared:163 - ext4 /dev/pmem0 rw,lazytime,seclabel
Fix it by applying the SB_LAZYTIME and SB_I_VERSION flags from *flags to s_flags before we parse the option and use the resulting state of the same flags in *flags at the end of successful remount.
Signed-off-by: Lukas Czerner lczerner@redhat.com Reviewed-by: Ritesh Harjani riteshh@linux.ibm.com Link: https://lore.kernel.org/r/20200723150526.19931-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index f4d7289462d9b..f9c692d7fd849 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5391,7 +5391,7 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) { struct ext4_super_block *es; struct ext4_sb_info *sbi = EXT4_SB(sb); - unsigned long old_sb_flags; + unsigned long old_sb_flags, vfs_flags; struct ext4_mount_options old_opts; int enable_quota = 0; ext4_group_t g; @@ -5434,6 +5434,14 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) if (sbi->s_journal && sbi->s_journal->j_task->io_context) journal_ioprio = sbi->s_journal->j_task->io_context->ioprio;
+ /* + * Some options can be enabled by ext4 and/or by VFS mount flag + * either way we need to make sure it matches in both *flags and + * s_flags. Copy those selected flags from *flags to s_flags + */ + vfs_flags = SB_LAZYTIME | SB_I_VERSION; + sb->s_flags = (sb->s_flags & ~vfs_flags) | (*flags & vfs_flags); + if (!parse_options(data, sb, NULL, &journal_ioprio, 1)) { err = -EINVAL; goto restore_opts; @@ -5487,9 +5495,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) set_task_ioprio(sbi->s_journal->j_task, journal_ioprio); }
- if (*flags & SB_LAZYTIME) - sb->s_flags |= SB_LAZYTIME; - if ((bool)(*flags & SB_RDONLY) != sb_rdonly(sb)) { if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED) { err = -EROFS; @@ -5637,7 +5642,13 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) } #endif
- *flags = (*flags & ~SB_LAZYTIME) | (sb->s_flags & SB_LAZYTIME); + /* + * Some options can be enabled by ext4 and/or by VFS mount flag + * either way we need to make sure it matches in both *flags and + * s_flags. Copy those selected flags from s_flags to *flags + */ + *flags = (*flags & ~vfs_flags) | (sb->s_flags & vfs_flags); + ext4_msg(sb, KERN_INFO, "re-mounted. Opts: %s", orig_data); kfree(orig_data); return 0;
From: Jan Kara jack@suse.cz
[ Upstream commit d176b1f62f242ab259ff665a26fbac69db1aecba ]
ext4_setup_system_zone() can fail. Handle the failure in ext4_remount().
Reviewed-by: Lukas Czerner lczerner@redhat.com Signed-off-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20200728130437.7804-2-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/ext4/super.c b/fs/ext4/super.c index f9c692d7fd849..698b4e89c4629 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5620,7 +5620,10 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) ext4_register_li_request(sb, first_not_zeroed); }
- ext4_setup_system_zone(sb); + err = ext4_setup_system_zone(sb); + if (err) + goto restore_opts; + if (sbi->s_journal == NULL && !(old_sb_flags & SB_RDONLY)) { err = ext4_commit_super(sb, 1); if (err)
From: Jan Kara jack@suse.cz
[ Upstream commit 0f5bde1db174f6c471f0bd27198575719dabe3e5 ]
When remounting filesystem fails late during remount handling and block_validity mount option is also changed during the remount, we fail to restore system zone information to a state matching the mount option. This is mostly harmless, just the block validity checking will not match the situation described by the mount option. Make sure these two are always consistent.
Reported-by: Lukas Czerner lczerner@redhat.com Reviewed-by: Lukas Czerner lczerner@redhat.com Signed-off-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20200728130437.7804-7-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/block_validity.c | 8 -------- fs/ext4/super.c | 29 +++++++++++++++++++++-------- 2 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c index 16e9b2fda03ae..30ff442453ff0 100644 --- a/fs/ext4/block_validity.c +++ b/fs/ext4/block_validity.c @@ -262,14 +262,6 @@ int ext4_setup_system_zone(struct super_block *sb) int flex_size = ext4_flex_bg_size(sbi); int ret;
- if (!test_opt(sb, BLOCK_VALIDITY)) { - if (sbi->system_blks) - ext4_release_system_zone(sb); - return 0; - } - if (sbi->system_blks) - return 0; - system_blks = kzalloc(sizeof(*system_blks), GFP_KERNEL); if (!system_blks) return -ENOMEM; diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 698b4e89c4629..9a83a3913c2ce 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -4603,11 +4603,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
ext4_set_resv_clusters(sb);
- err = ext4_setup_system_zone(sb); - if (err) { - ext4_msg(sb, KERN_ERR, "failed to initialize system " - "zone (%d)", err); - goto failed_mount4a; + if (test_opt(sb, BLOCK_VALIDITY)) { + err = ext4_setup_system_zone(sb); + if (err) { + ext4_msg(sb, KERN_ERR, "failed to initialize system " + "zone (%d)", err); + goto failed_mount4a; + } }
ext4_ext_init(sb); @@ -5620,9 +5622,16 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) ext4_register_li_request(sb, first_not_zeroed); }
- err = ext4_setup_system_zone(sb); - if (err) - goto restore_opts; + /* + * Handle creation of system zone data early because it can fail. + * Releasing of existing data is done when we are sure remount will + * succeed. + */ + if (test_opt(sb, BLOCK_VALIDITY) && !sbi->system_blks) { + err = ext4_setup_system_zone(sb); + if (err) + goto restore_opts; + }
if (sbi->s_journal == NULL && !(old_sb_flags & SB_RDONLY)) { err = ext4_commit_super(sb, 1); @@ -5644,6 +5653,8 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) } } #endif + if (!test_opt(sb, BLOCK_VALIDITY) && sbi->system_blks) + ext4_release_system_zone(sb);
/* * Some options can be enabled by ext4 and/or by VFS mount flag @@ -5665,6 +5676,8 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) sbi->s_commit_interval = old_opts.s_commit_interval; sbi->s_min_batch_time = old_opts.s_min_batch_time; sbi->s_max_batch_time = old_opts.s_max_batch_time; + if (!test_opt(sb, BLOCK_VALIDITY) && sbi->system_blks) + ext4_release_system_zone(sb); #ifdef CONFIG_QUOTA sbi->s_jquota_fmt = old_opts.s_jquota_fmt; for (i = 0; i < EXT4_MAXQUOTAS; i++) {
From: Xianting Tian xianting_tian@126.com
[ Upstream commit 377254b2cd2252c7c3151b113cbdf93a7736c2e9 ]
If a device is hot-removed --- for example, when a physical device is unplugged from pcie slot or a nbd device's network is shutdown --- this can result in a BUG_ON() crash in submit_bh_wbc(). This is because the when the block device dies, the buffer heads will have their Buffer_Mapped flag get cleared, leading to the crash in submit_bh_wbc.
We had attempted to work around this problem in commit a17712c8 ("ext4: check superblock mapped prior to committing"). Unfortunately, it's still possible to hit the BUG_ON(!buffer_mapped(bh)) if the device dies between when the work-around check in ext4_commit_super() and when submit_bh_wbh() is finally called:
Code path: ext4_commit_super judge if 'buffer_mapped(sbh)' is false, return <== commit a17712c8 lock_buffer(sbh) ... unlock_buffer(sbh) __sync_dirty_buffer(sbh,... lock_buffer(sbh) judge if 'buffer_mapped(sbh))' is false, return <== added by this patch submit_bh(...,sbh) submit_bh_wbc(...,sbh,...)
[100722.966497] kernel BUG at fs/buffer.c:3095! <== BUG_ON(!buffer_mapped(bh))' in submit_bh_wbc() [100722.966503] invalid opcode: 0000 [#1] SMP [100722.966566] task: ffff8817e15a9e40 task.stack: ffffc90024744000 [100722.966574] RIP: 0010:submit_bh_wbc+0x180/0x190 [100722.966575] RSP: 0018:ffffc90024747a90 EFLAGS: 00010246 [100722.966576] RAX: 0000000000620005 RBX: ffff8818a80603a8 RCX: 0000000000000000 [100722.966576] RDX: ffff8818a80603a8 RSI: 0000000000020800 RDI: 0000000000000001 [100722.966577] RBP: ffffc90024747ac0 R08: 0000000000000000 R09: ffff88207f94170d [100722.966578] R10: 00000000000437c8 R11: 0000000000000001 R12: 0000000000020800 [100722.966578] R13: 0000000000000001 R14: 000000000bf9a438 R15: ffff88195f333000 [100722.966580] FS: 00007fa2eee27700(0000) GS:ffff88203d840000(0000) knlGS:0000000000000000 [100722.966580] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [100722.966581] CR2: 0000000000f0b008 CR3: 000000201a622003 CR4: 00000000007606e0 [100722.966582] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [100722.966583] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [100722.966583] PKRU: 55555554 [100722.966583] Call Trace: [100722.966588] __sync_dirty_buffer+0x6e/0xd0 [100722.966614] ext4_commit_super+0x1d8/0x290 [ext4] [100722.966626] __ext4_std_error+0x78/0x100 [ext4] [100722.966635] ? __ext4_journal_get_write_access+0xca/0x120 [ext4] [100722.966646] ext4_reserve_inode_write+0x58/0xb0 [ext4] [100722.966655] ? ext4_dirty_inode+0x48/0x70 [ext4] [100722.966663] ext4_mark_inode_dirty+0x53/0x1e0 [ext4] [100722.966671] ? __ext4_journal_start_sb+0x6d/0xf0 [ext4] [100722.966679] ext4_dirty_inode+0x48/0x70 [ext4] [100722.966682] __mark_inode_dirty+0x17f/0x350 [100722.966686] generic_update_time+0x87/0xd0 [100722.966687] touch_atime+0xa9/0xd0 [100722.966690] generic_file_read_iter+0xa09/0xcd0 [100722.966694] ? page_cache_tree_insert+0xb0/0xb0 [100722.966704] ext4_file_read_iter+0x4a/0x100 [ext4] [100722.966707] ? __inode_security_revalidate+0x4f/0x60 [100722.966709] __vfs_read+0xec/0x160 [100722.966711] vfs_read+0x8c/0x130 [100722.966712] SyS_pread64+0x87/0xb0 [100722.966716] do_syscall_64+0x67/0x1b0 [100722.966719] entry_SYSCALL64_slow_path+0x25/0x25
To address this, add the check of 'buffer_mapped(bh)' to __sync_dirty_buffer(). This also has the benefit of fixing this for other file systems.
With this addition, we can drop the workaround in ext4_commit_supper().
[ Commit description rewritten by tytso. ]
Signed-off-by: Xianting Tian xianting_tian@126.com Link: https://lore.kernel.org/r/1596211825-8750-1-git-send-email-xianting_tian@126... Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/buffer.c | 9 +++++++++ fs/ext4/super.c | 7 ------- 2 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/fs/buffer.c b/fs/buffer.c index a60f60396cfa0..7ba52621cc259 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -3161,6 +3161,15 @@ int __sync_dirty_buffer(struct buffer_head *bh, int op_flags) WARN_ON(atomic_read(&bh->b_count) < 1); lock_buffer(bh); if (test_clear_buffer_dirty(bh)) { + /* + * The bh should be mapped, but it might not be if the + * device was hot-removed. Not much we can do but fail the I/O. + */ + if (!buffer_mapped(bh)) { + unlock_buffer(bh); + return -EIO; + } + get_bh(bh); bh->b_end_io = end_buffer_write_sync; ret = submit_bh(REQ_OP_WRITE, op_flags, bh); diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 9a83a3913c2ce..8f27a12a1bf7f 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5108,13 +5108,6 @@ static int ext4_commit_super(struct super_block *sb, int sync) if (!sbh || block_device_ejected(sb)) return error;
- /* - * The superblock bh should be mapped, but it might not be if the - * device was hot-removed. Not much we can do but fail the I/O. - */ - if (!buffer_mapped(sbh)) - return error; - /* * If the file system is mounted read-only, don't update the * superblock write time. This avoids updating the superblock
From: Antonio Borneo antonio.borneo@st.com
[ Upstream commit 135dd873d3c76d812ae64c668adef3f2c59ed27f ]
The caller of stm32_spi_transfer_one(), spi_transfer_one_message(), is waiting for us to call spi_finalize_current_transfer() and will eventually schedule a new transfer, if available. We should guarantee that the spi controller is really available before calling spi_finalize_current_transfer().
Move the call to spi_finalize_current_transfer() _after_ the call to stm32_spi_disable().
Signed-off-by: Antonio Borneo antonio.borneo@st.com Signed-off-by: Alain Volmat alain.volmat@st.com Link: https://lore.kernel.org/r/1597043558-29668-2-git-send-email-alain.volmat@st.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-stm32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index ef3be03574e80..04ee21defbc0b 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -969,8 +969,8 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id) spin_unlock_irqrestore(&spi->lock, flags);
if (end) { - spi_finalize_current_transfer(master); stm32h7_spi_disable(spi); + spi_finalize_current_transfer(master); }
return IRQ_HANDLED;
From: Amelie Delaunay amelie.delaunay@st.com
[ Upstream commit 3373e9004acc0603242622b4378c64bc01d21b5f ]
When transfer is shorter than half of the fifo, set the data packet size up to transfer size instead of up to half of the fifo. Check also that threshold is set at least to 1 data frame.
Signed-off-by: Amelie Delaunay amelie.delaunay@st.com Signed-off-by: Alain Volmat alain.volmat@st.com Link: https://lore.kernel.org/r/1597043558-29668-3-git-send-email-alain.volmat@st.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-stm32.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 04ee21defbc0b..faaff58cf415e 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -467,20 +467,27 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz, /** * stm32h7_spi_prepare_fthlv - Determine FIFO threshold level * @spi: pointer to the spi controller data structure + * @xfer_len: length of the message to be transferred */ -static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi) +static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi, u32 xfer_len) { - u32 fthlv, half_fifo; + u32 fthlv, half_fifo, packet;
/* data packet should not exceed 1/2 of fifo space */ half_fifo = (spi->fifo_size / 2);
+ /* data_packet should not exceed transfer length */ + if (half_fifo > xfer_len) + packet = xfer_len; + else + packet = half_fifo; + if (spi->cur_bpw <= 8) - fthlv = half_fifo; + fthlv = packet; else if (spi->cur_bpw <= 16) - fthlv = half_fifo / 2; + fthlv = packet / 2; else - fthlv = half_fifo / 4; + fthlv = packet / 4;
/* align packet size with data registers access */ if (spi->cur_bpw > 8) @@ -488,6 +495,9 @@ static u32 stm32h7_spi_prepare_fthlv(struct stm32_spi *spi) else fthlv -= (fthlv % 4); /* multiple of 4 */
+ if (!fthlv) + fthlv = 1; + return fthlv; }
@@ -1389,7 +1399,7 @@ static void stm32h7_spi_set_bpw(struct stm32_spi *spi) cfg1_setb |= (bpw << STM32H7_SPI_CFG1_DSIZE_SHIFT) & STM32H7_SPI_CFG1_DSIZE;
- spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi); + spi->cur_fthlv = stm32h7_spi_prepare_fthlv(spi, spi->cur_xferlen); fthlv = spi->cur_fthlv - 1;
cfg1_clrb |= STM32H7_SPI_CFG1_FTHLV; @@ -1578,6 +1588,8 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi,
spin_lock_irqsave(&spi->lock, flags);
+ spi->cur_xferlen = transfer->len; + if (spi->cur_bpw != transfer->bits_per_word) { spi->cur_bpw = transfer->bits_per_word; spi->cfg->set_bpw(spi); @@ -1625,8 +1637,6 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, goto out; }
- spi->cur_xferlen = transfer->len; - dev_dbg(spi->dev, "transfer communication mode set to %d\n", spi->cur_comm); dev_dbg(spi->dev,
From: Amelie Delaunay amelie.delaunay@st.com
[ Upstream commit 9cc61973bf9385b19ff5dda4a2a7e265fcba85e4 ]
Fix spi->clk_rate when it is odd to the nearest lowest even value because minimum SPI divider is 2.
Signed-off-by: Amelie Delaunay amelie.delaunay@st.com Signed-off-by: Alain Volmat alain.volmat@st.com Link: https://lore.kernel.org/r/1597043558-29668-4-git-send-email-alain.volmat@st.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-stm32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index faaff58cf415e..08492284369dd 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -441,7 +441,8 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz, { u32 div, mbrdiv;
- div = DIV_ROUND_UP(spi->clk_rate, speed_hz); + /* Ensure spi->clk_rate is even */ + div = DIV_ROUND_UP(spi->clk_rate & ~0x1, speed_hz);
/* * SPI framework set xfer->speed_hz to master->max_speed_hz if
From: Alain Volmat alain.volmat@st.com
[ Upstream commit 60ccb3515fc61a0124c70aa37317f75b67560024 ]
SPI registers content may have been lost upon suspend/resume sequence. So, always compute and apply the necessary configuration in stm32_spi_transfer_one_setup routine.
Signed-off-by: Alain Volmat alain.volmat@st.com Link: https://lore.kernel.org/r/1597043558-29668-6-git-send-email-alain.volmat@st.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-stm32.c | 42 +++++++++++++++++------------------------ 1 file changed, 17 insertions(+), 25 deletions(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 08492284369dd..3fe1edb23e36c 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -1586,41 +1586,33 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, unsigned long flags; unsigned int comm_type; int nb_words, ret = 0; + int mbr;
spin_lock_irqsave(&spi->lock, flags);
spi->cur_xferlen = transfer->len;
- if (spi->cur_bpw != transfer->bits_per_word) { - spi->cur_bpw = transfer->bits_per_word; - spi->cfg->set_bpw(spi); - } - - if (spi->cur_speed != transfer->speed_hz) { - int mbr; - - /* Update spi->cur_speed with real clock speed */ - mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz, - spi->cfg->baud_rate_div_min, - spi->cfg->baud_rate_div_max); - if (mbr < 0) { - ret = mbr; - goto out; - } + spi->cur_bpw = transfer->bits_per_word; + spi->cfg->set_bpw(spi);
- transfer->speed_hz = spi->cur_speed; - stm32_spi_set_mbr(spi, mbr); + /* Update spi->cur_speed with real clock speed */ + mbr = stm32_spi_prepare_mbr(spi, transfer->speed_hz, + spi->cfg->baud_rate_div_min, + spi->cfg->baud_rate_div_max); + if (mbr < 0) { + ret = mbr; + goto out; }
- comm_type = stm32_spi_communication_type(spi_dev, transfer); - if (spi->cur_comm != comm_type) { - ret = spi->cfg->set_mode(spi, comm_type); + transfer->speed_hz = spi->cur_speed; + stm32_spi_set_mbr(spi, mbr);
- if (ret < 0) - goto out; + comm_type = stm32_spi_communication_type(spi_dev, transfer); + ret = spi->cfg->set_mode(spi, comm_type); + if (ret < 0) + goto out;
- spi->cur_comm = comm_type; - } + spi->cur_comm = comm_type;
if (spi->cfg->set_data_idleness) spi->cfg->set_data_idleness(spi, transfer->len);
From: Evan Quan evan.quan@amd.com
[ Upstream commit 266d81d9eed30f4994d76a2b237c63ece062eefe ]
Correct the cached smu feature state on pp_features sysfs setting.
Signed-off-by: Evan Quan evan.quan@amd.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 38 +++++++++---------- 1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index 08b6ba39a6d7c..f714d65de07e1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -985,27 +985,15 @@ static int vega20_disable_all_smu_features(struct pp_hwmgr *hwmgr) { struct vega20_hwmgr *data = (struct vega20_hwmgr *)(hwmgr->backend); - uint64_t features_enabled; - int i; - bool enabled; - int ret = 0; + int i, ret = 0;
PP_ASSERT_WITH_CODE((ret = smum_send_msg_to_smc(hwmgr, PPSMC_MSG_DisableAllSmuFeatures)) == 0, "[DisableAllSMUFeatures] Failed to disable all smu features!", return ret);
- ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled); - PP_ASSERT_WITH_CODE(!ret, - "[DisableAllSMUFeatures] Failed to get enabled smc features!", - return ret); - - for (i = 0; i < GNLD_FEATURES_MAX; i++) { - enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ? - true : false; - data->smu_features[i].enabled = enabled; - data->smu_features[i].supported = enabled; - } + for (i = 0; i < GNLD_FEATURES_MAX; i++) + data->smu_features[i].enabled = 0;
return 0; } @@ -3215,10 +3203,11 @@ static int vega20_get_ppfeature_status(struct pp_hwmgr *hwmgr, char *buf)
static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfeature_masks) { - uint64_t features_enabled; - uint64_t features_to_enable; - uint64_t features_to_disable; - int ret = 0; + struct vega20_hwmgr *data = + (struct vega20_hwmgr *)(hwmgr->backend); + uint64_t features_enabled, features_to_enable, features_to_disable; + int i, ret = 0; + bool enabled;
if (new_ppfeature_masks >= (1ULL << GNLD_FEATURES_MAX)) return -EINVAL; @@ -3247,6 +3236,17 @@ static int vega20_set_ppfeature_status(struct pp_hwmgr *hwmgr, uint64_t new_ppfe return ret; }
+ /* Update the cached feature enablement state */ + ret = vega20_get_enabled_smc_features(hwmgr, &features_enabled); + if (ret) + return ret; + + for (i = 0; i < GNLD_FEATURES_MAX; i++) { + enabled = (features_enabled & data->smu_features[i].smu_feature_bitmap) ? + true : false; + data->smu_features[i].enabled = enabled; + } + return 0; }
From: Evan Quan evan.quan@amd.com
[ Upstream commit 2c5b8080d810d98e3e59617680218499b17c84a1 ]
The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to assume the bootup state in SMU based on the dpm status.
Signed-off-by: Evan Quan evan.quan@amd.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 6 ------ 1 file changed, 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c index f714d65de07e1..eeacd12caded1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c @@ -1644,12 +1644,6 @@ static void vega20_init_powergate_state(struct pp_hwmgr *hwmgr)
data->uvd_power_gated = true; data->vce_power_gated = true; - - if (data->smu_features[GNLD_DPM_UVD].enabled) - data->uvd_power_gated = false; - - if (data->smu_features[GNLD_DPM_VCE].enabled) - data->vce_power_gated = false; }
static int vega20_enable_dpm_tasks(struct pp_hwmgr *hwmgr)
From: Anthony Koo Anthony.Koo@amd.com
[ Upstream commit e4ed4dbbc8383d42a197da8fe7ca6434b0f14def ]
[Why] 1. There is a calculation that is using frame_time_in_us instead of last_render_time_in_us to calculate whether choosing an LFC multiplier would cause the inserted frame duration to be outside of range.
2. We do not handle unsigned integer subtraction correctly and it underflows to a really large value, which causes some logic errors.
[How] 1. Fix logic to calculate 'within range' using last_render_time_in_us 2. Split out delta_from_mid_point_delta_in_us calculation to ensure we don't underflow and wrap around
Signed-off-by: Anthony Koo Anthony.Koo@amd.com Reviewed-by: Aric Cyr Aric.Cyr@amd.com Acked-by: Qingqing Zhuo qingqing.zhuo@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../amd/display/modules/freesync/freesync.c | 36 +++++++++++++++---- 1 file changed, 29 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c index c33454a9e0b4d..85dcb3b078df7 100644 --- a/drivers/gpu/drm/amd/display/modules/freesync/freesync.c +++ b/drivers/gpu/drm/amd/display/modules/freesync/freesync.c @@ -324,22 +324,44 @@ static void apply_below_the_range(struct core_freesync *core_freesync,
/* Choose number of frames to insert based on how close it * can get to the mid point of the variable range. + * - Delta for CEIL: delta_from_mid_point_in_us_1 + * - Delta for FLOOR: delta_from_mid_point_in_us_2 */ - if ((frame_time_in_us / mid_point_frames_ceil) > in_out_vrr->min_duration_in_us && - (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2 || - mid_point_frames_floor < 2)) { + if ((last_render_time_in_us / mid_point_frames_ceil) < in_out_vrr->min_duration_in_us) { + /* Check for out of range. + * If using CEIL produces a value that is out of range, + * then we are forced to use FLOOR. + */ + frames_to_insert = mid_point_frames_floor; + } else if (mid_point_frames_floor < 2) { + /* Check if FLOOR would result in non-LFC. In this case + * choose to use CEIL + */ + frames_to_insert = mid_point_frames_ceil; + } else if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) { + /* If choosing CEIL results in a frame duration that is + * closer to the mid point of the range. + * Choose CEIL + */ frames_to_insert = mid_point_frames_ceil; - delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 - - delta_from_mid_point_in_us_1; } else { + /* If choosing FLOOR results in a frame duration that is + * closer to the mid point of the range. + * Choose FLOOR + */ frames_to_insert = mid_point_frames_floor; - delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 - - delta_from_mid_point_in_us_2; }
/* Prefer current frame multiplier when BTR is enabled unless it drifts * too far from the midpoint */ + if (delta_from_mid_point_in_us_1 < delta_from_mid_point_in_us_2) { + delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_2 - + delta_from_mid_point_in_us_1; + } else { + delta_from_mid_point_delta_in_us = delta_from_mid_point_in_us_1 - + delta_from_mid_point_in_us_2; + } if (in_out_vrr->btr.frames_to_insert != 0 && delta_from_mid_point_delta_in_us < BTR_DRIFT_MARGIN) { if (((last_render_time_in_us / in_out_vrr->btr.frames_to_insert) <
From: Anthony Koo Anthony.Koo@amd.com
[ Upstream commit abba907c7a20032c2d504fd5afe3af7d440a09d0 ]
[Why] Using FRAME_UPDATE will result in infopacket to be potentially updated one frame late. In commit stream scenarios for previously active stream, some stale infopacket data from previous config might be erroneously sent out on initial frame after stream is re-enabled.
[How] Switch to using IMMEDIATE_UPDATE mode
Signed-off-by: Anthony Koo Anthony.Koo@amd.com Reviewed-by: Ashley Thomas Ashley.Thomas2@amd.com Acked-by: Qingqing Zhuo qingqing.zhuo@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../amd/display/dc/dcn10/dcn10_stream_encoder.c | 16 ++++++++-------- .../amd/display/dc/dcn10/dcn10_stream_encoder.h | 14 ++++++++++++++ 2 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c index 7eba9333c3285..66ce9092e9950 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c @@ -121,35 +121,35 @@ void enc1_update_generic_info_packet( switch (packet_index) { case 0: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC0_FRAME_UPDATE, 1); + AFMT_GENERIC0_IMMEDIATE_UPDATE, 1); break; case 1: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC1_FRAME_UPDATE, 1); + AFMT_GENERIC1_IMMEDIATE_UPDATE, 1); break; case 2: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC2_FRAME_UPDATE, 1); + AFMT_GENERIC2_IMMEDIATE_UPDATE, 1); break; case 3: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC3_FRAME_UPDATE, 1); + AFMT_GENERIC3_IMMEDIATE_UPDATE, 1); break; case 4: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC4_FRAME_UPDATE, 1); + AFMT_GENERIC4_IMMEDIATE_UPDATE, 1); break; case 5: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC5_FRAME_UPDATE, 1); + AFMT_GENERIC5_IMMEDIATE_UPDATE, 1); break; case 6: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC6_FRAME_UPDATE, 1); + AFMT_GENERIC6_IMMEDIATE_UPDATE, 1); break; case 7: REG_UPDATE(AFMT_VBI_PACKET_CONTROL1, - AFMT_GENERIC7_FRAME_UPDATE, 1); + AFMT_GENERIC7_IMMEDIATE_UPDATE, 1); break; default: break; diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h index f9b9e221c698b..7507000a99ac4 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.h @@ -273,7 +273,14 @@ struct dcn10_stream_enc_registers { SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_FRAME_UPDATE, mask_sh),\ SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_FRAME_UPDATE, mask_sh),\ SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_FRAME_UPDATE, mask_sh),\ + SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC0_IMMEDIATE_UPDATE, mask_sh),\ + SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC1_IMMEDIATE_UPDATE, mask_sh),\ + SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC2_IMMEDIATE_UPDATE, mask_sh),\ + SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC3_IMMEDIATE_UPDATE, mask_sh),\ SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC4_IMMEDIATE_UPDATE, mask_sh),\ + SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_IMMEDIATE_UPDATE, mask_sh),\ + SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_IMMEDIATE_UPDATE, mask_sh),\ + SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_IMMEDIATE_UPDATE, mask_sh),\ SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC5_FRAME_UPDATE, mask_sh),\ SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC6_FRAME_UPDATE, mask_sh),\ SE_SF(DIG0_AFMT_VBI_PACKET_CONTROL1, AFMT_GENERIC7_FRAME_UPDATE, mask_sh),\ @@ -337,7 +344,14 @@ struct dcn10_stream_enc_registers { type AFMT_GENERIC2_FRAME_UPDATE;\ type AFMT_GENERIC3_FRAME_UPDATE;\ type AFMT_GENERIC4_FRAME_UPDATE;\ + type AFMT_GENERIC0_IMMEDIATE_UPDATE;\ + type AFMT_GENERIC1_IMMEDIATE_UPDATE;\ + type AFMT_GENERIC2_IMMEDIATE_UPDATE;\ + type AFMT_GENERIC3_IMMEDIATE_UPDATE;\ type AFMT_GENERIC4_IMMEDIATE_UPDATE;\ + type AFMT_GENERIC5_IMMEDIATE_UPDATE;\ + type AFMT_GENERIC6_IMMEDIATE_UPDATE;\ + type AFMT_GENERIC7_IMMEDIATE_UPDATE;\ type AFMT_GENERIC5_FRAME_UPDATE;\ type AFMT_GENERIC6_FRAME_UPDATE;\ type AFMT_GENERIC7_FRAME_UPDATE;\
From: Jianlin Lv Jianlin.Lv@arm.com
[ Upstream commit 0390c429dbed4068bd2cd8dded937d9a5ec24cd2 ]
test_progs reports the segmentation fault as below:
$ sudo ./test_progs -t mmap --verbose test_mmap:PASS:skel_open_and_load 0 nsec [...] test_mmap:PASS:adv_mmap1 0 nsec test_mmap:PASS:adv_mmap2 0 nsec test_mmap:PASS:adv_mmap3 0 nsec test_mmap:PASS:adv_mmap4 0 nsec Segmentation fault
This issue was triggered because mmap() and munmap() used inconsistent length parameters; mmap() creates a new mapping of 3 * page_size, but the length parameter set in the subsequent re-map and munmap() functions is 4 * page_size; this leads to the destruction of the process space.
To fix this issue, first create 4 pages of anonymous mapping, then do all the mmap() with MAP_FIXED.
Another issue is that when unmap the second page fails, the length parameter to delete tmp1 mappings should be 4 * page_size.
Signed-off-by: Jianlin Lv Jianlin.Lv@arm.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Andrii Nakryiko andriin@fb.com Link: https://lore.kernel.org/bpf/20200810153940.125508-1-Jianlin.Lv@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/prog_tests/mmap.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/mmap.c b/tools/testing/selftests/bpf/prog_tests/mmap.c index 43d0b5578f461..9c3c5c0f068fb 100644 --- a/tools/testing/selftests/bpf/prog_tests/mmap.c +++ b/tools/testing/selftests/bpf/prog_tests/mmap.c @@ -21,7 +21,7 @@ void test_mmap(void) const long page_size = sysconf(_SC_PAGE_SIZE); int err, duration = 0, i, data_map_fd, data_map_id, tmp_fd, rdmap_fd; struct bpf_map *data_map, *bss_map; - void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp1, *tmp2; + void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp0, *tmp1, *tmp2; struct test_mmap__bss *bss_data; struct bpf_map_info map_info; __u32 map_info_sz = sizeof(map_info); @@ -183,16 +183,23 @@ void test_mmap(void)
/* check some more advanced mmap() manipulations */
+ tmp0 = mmap(NULL, 4 * page_size, PROT_READ, MAP_SHARED | MAP_ANONYMOUS, + -1, 0); + if (CHECK(tmp0 == MAP_FAILED, "adv_mmap0", "errno %d\n", errno)) + goto cleanup; + /* map all but last page: pages 1-3 mapped */ - tmp1 = mmap(NULL, 3 * page_size, PROT_READ, MAP_SHARED, + tmp1 = mmap(tmp0, 3 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED, data_map_fd, 0); - if (CHECK(tmp1 == MAP_FAILED, "adv_mmap1", "errno %d\n", errno)) + if (CHECK(tmp0 != tmp1, "adv_mmap1", "tmp0: %p, tmp1: %p\n", tmp0, tmp1)) { + munmap(tmp0, 4 * page_size); goto cleanup; + }
/* unmap second page: pages 1, 3 mapped */ err = munmap(tmp1 + page_size, page_size); if (CHECK(err, "adv_mmap2", "errno %d\n", errno)) { - munmap(tmp1, map_sz); + munmap(tmp1, 4 * page_size); goto cleanup; }
@@ -201,7 +208,7 @@ void test_mmap(void) MAP_SHARED | MAP_FIXED, data_map_fd, 0); if (CHECK(tmp2 == MAP_FAILED, "adv_mmap3", "errno %d\n", errno)) { munmap(tmp1, page_size); - munmap(tmp1 + 2*page_size, page_size); + munmap(tmp1 + 2*page_size, 2 * page_size); goto cleanup; } CHECK(tmp1 + page_size != tmp2, "adv_mmap4", @@ -211,7 +218,7 @@ void test_mmap(void) tmp2 = mmap(tmp1, 4 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED, data_map_fd, 0); if (CHECK(tmp2 == MAP_FAILED, "adv_mmap5", "errno %d\n", errno)) { - munmap(tmp1, 3 * page_size); /* unmap page 1 */ + munmap(tmp1, 4 * page_size); /* unmap page 1 */ goto cleanup; } CHECK(tmp1 != tmp2, "adv_mmap6", "tmp1: %p, tmp2: %p\n", tmp1, tmp2);
From: Jean-Philippe Brucker jean-philippe@linaro.org
[ Upstream commit 702eddc77a905782083b14ccd05b23840675fd18 ]
When building Arm NEON (SIMD) code from lib/raid6/neon.uc, GCC emits DWARF information using a base type "__Poly8_t", which is internal to GCC and not recognized by Clang. This causes build failures when building with Clang a vmlinux.h generated from an arm64 kernel that was built with GCC.
vmlinux.h:47284:9: error: unknown type name '__Poly8_t' typedef __Poly8_t poly8x16_t[16]; ^~~~~~~~~
The polyX_t types are defined as unsigned integers in the "Arm C Language Extension" document (101028_Q220_00_en). Emit typedefs based on standard integer types for the GCC internal types, similar to those emitted by Clang.
Including linux/kernel.h to use ARRAY_SIZE() incidentally redefined max(), causing a build bug due to different types, hence the seemingly unrelated change.
Reported-by: Jakov Petrina jakov.petrina@sartura.hr Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: Andrii Nakryiko andriin@fb.com Link: https://lore.kernel.org/bpf/20200812143909.3293280-1-jean-philippe@linaro.or... Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/bpf/btf_dump.c | 35 ++++++++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-)
diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c index 653dbbe2e3663..55a729682cf94 100644 --- a/tools/lib/bpf/btf_dump.c +++ b/tools/lib/bpf/btf_dump.c @@ -13,6 +13,7 @@ #include <errno.h> #include <linux/err.h> #include <linux/btf.h> +#include <linux/kernel.h> #include "btf.h" #include "hashmap.h" #include "libbpf.h" @@ -548,6 +549,9 @@ static int btf_dump_order_type(struct btf_dump *d, __u32 id, bool through_ptr) } }
+static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id, + const struct btf_type *t); + static void btf_dump_emit_struct_fwd(struct btf_dump *d, __u32 id, const struct btf_type *t); static void btf_dump_emit_struct_def(struct btf_dump *d, __u32 id, @@ -670,6 +674,9 @@ static void btf_dump_emit_type(struct btf_dump *d, __u32 id, __u32 cont_id)
switch (kind) { case BTF_KIND_INT: + /* Emit type alias definitions if necessary */ + btf_dump_emit_missing_aliases(d, id, t); + tstate->emit_state = EMITTED; break; case BTF_KIND_ENUM: @@ -869,7 +876,7 @@ static void btf_dump_emit_struct_def(struct btf_dump *d, btf_dump_printf(d, ": %d", m_sz); off = m_off + m_sz; } else { - m_sz = max(0, btf__resolve_size(d->btf, m->type)); + m_sz = max(0LL, btf__resolve_size(d->btf, m->type)); off = m_off + m_sz * 8; } btf_dump_printf(d, ";"); @@ -889,6 +896,32 @@ static void btf_dump_emit_struct_def(struct btf_dump *d, btf_dump_printf(d, " __attribute__((packed))"); }
+static const char *missing_base_types[][2] = { + /* + * GCC emits typedefs to its internal __PolyX_t types when compiling Arm + * SIMD intrinsics. Alias them to standard base types. + */ + { "__Poly8_t", "unsigned char" }, + { "__Poly16_t", "unsigned short" }, + { "__Poly64_t", "unsigned long long" }, + { "__Poly128_t", "unsigned __int128" }, +}; + +static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id, + const struct btf_type *t) +{ + const char *name = btf_dump_type_name(d, id); + int i; + + for (i = 0; i < ARRAY_SIZE(missing_base_types); i++) { + if (strcmp(name, missing_base_types[i][0]) == 0) { + btf_dump_printf(d, "typedef %s %s;\n\n", + missing_base_types[i][1], name); + break; + } + } +} + static void btf_dump_emit_enum_fwd(struct btf_dump *d, __u32 id, const struct btf_type *t) {
From: Florian Westphal fw@strlen.de
[ Upstream commit 2404b73c3f1a5f15726c6ecd226b56f6f992767f ]
nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core.
The current use of the netfilter ipv6 stub indirections causes a module dependency between ipv6 and nf_defrag_ipv6.
This prevents nf_defrag_ipv6 module from being removed because ipv6 can't be unloaded.
Remove the indirection and always use a direct call. This creates a depency from nf_conntrack_bridge to nf_defrag_ipv6 instead:
modinfo nf_conntrack depends: nf_conntrack,nf_defrag_ipv6,bridge
.. and nf_conntrack already depends on nf_defrag_ipv6 anyway.
Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/netfilter_ipv6.h | 18 ------------------ net/bridge/netfilter/nf_conntrack_bridge.c | 8 ++++++-- net/ipv6/netfilter.c | 3 --- 3 files changed, 6 insertions(+), 23 deletions(-)
diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index aac42c28fe62d..9b67394471e1c 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -58,7 +58,6 @@ struct nf_ipv6_ops { int (*output)(struct net *, struct sock *, struct sk_buff *)); int (*reroute)(struct sk_buff *skb, const struct nf_queue_entry *entry); #if IS_MODULE(CONFIG_IPV6) - int (*br_defrag)(struct net *net, struct sk_buff *skb, u32 user); int (*br_fragment)(struct net *net, struct sock *sk, struct sk_buff *skb, struct nf_bridge_frag_data *data, @@ -117,23 +116,6 @@ static inline int nf_ip6_route(struct net *net, struct dst_entry **dst,
#include <net/netfilter/ipv6/nf_defrag_ipv6.h>
-static inline int nf_ipv6_br_defrag(struct net *net, struct sk_buff *skb, - u32 user) -{ -#if IS_MODULE(CONFIG_IPV6) - const struct nf_ipv6_ops *v6_ops = nf_get_ipv6_ops(); - - if (!v6_ops) - return 1; - - return v6_ops->br_defrag(net, skb, user); -#elif IS_BUILTIN(CONFIG_IPV6) - return nf_ct_frag6_gather(net, skb, user); -#else - return 1; -#endif -} - int br_ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb, struct nf_bridge_frag_data *data, int (*output)(struct net *, struct sock *sk, diff --git a/net/bridge/netfilter/nf_conntrack_bridge.c b/net/bridge/netfilter/nf_conntrack_bridge.c index 8096732223828..8d033a75a766e 100644 --- a/net/bridge/netfilter/nf_conntrack_bridge.c +++ b/net/bridge/netfilter/nf_conntrack_bridge.c @@ -168,6 +168,7 @@ static unsigned int nf_ct_br_defrag4(struct sk_buff *skb, static unsigned int nf_ct_br_defrag6(struct sk_buff *skb, const struct nf_hook_state *state) { +#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) u16 zone_id = NF_CT_DEFAULT_ZONE_ID; enum ip_conntrack_info ctinfo; struct br_input_skb_cb cb; @@ -180,14 +181,17 @@ static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
br_skb_cb_save(skb, &cb, sizeof(struct inet6_skb_parm));
- err = nf_ipv6_br_defrag(state->net, skb, - IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id); + err = nf_ct_frag6_gather(state->net, skb, + IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id); /* queued */ if (err == -EINPROGRESS) return NF_STOLEN;
br_skb_cb_restore(skb, &cb, IP6CB(skb)->frag_max_size); return err == 0 ? NF_ACCEPT : NF_DROP; +#else + return NF_ACCEPT; +#endif }
static int nf_ct_br_ip_check(const struct sk_buff *skb) diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 409e79b84a830..6d0e942d082d4 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -245,9 +245,6 @@ static const struct nf_ipv6_ops ipv6ops = { .route_input = ip6_route_input, .fragment = ip6_fragment, .reroute = nf_ip6_reroute, -#if IS_MODULE(CONFIG_IPV6) && IS_ENABLED(CONFIG_NF_DEFRAG_IPV6) - .br_defrag = nf_ct_frag6_gather, -#endif #if IS_MODULE(CONFIG_IPV6) .br_fragment = br_ip6_fragment, #endif
From: Toke Høiland-Jørgensen toke@redhat.com
[ Upstream commit 23ab656be263813acc3c20623757d3cd1496d9e1 ]
Turns out there were a few more instances where libbpf didn't save the errno before writing an error message, causing errno to be overridden by the printf() return and the error disappearing if logging is enabled.
Signed-off-by: Toke Høiland-Jørgensen toke@redhat.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Andrii Nakryiko andriin@fb.com Link: https://lore.kernel.org/bpf/20200813142905.160381-1-toke@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/bpf/libbpf.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index c417cff2cdaf4..3e53bfcba2b1a 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -3210,10 +3210,11 @@ bpf_object__probe_global_data(struct bpf_object *obj)
map = bpf_create_map_xattr(&map_attr); if (map < 0) { - cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg)); + ret = -errno; + cp = libbpf_strerror_r(ret, errmsg, sizeof(errmsg)); pr_warn("Error in %s():%s(%d). Couldn't create simple array map.\n", - __func__, cp, errno); - return -errno; + __func__, cp, -ret); + return ret; }
insns[0].imm = map; @@ -5508,9 +5509,10 @@ int bpf_program__pin_instance(struct bpf_program *prog, const char *path, }
if (bpf_obj_pin(prog->instances.fds[instance], path)) { - cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg)); + err = -errno; + cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg)); pr_warn("failed to pin program: %s\n", cp); - return -errno; + return err; } pr_debug("pinned program '%s'\n", path);
From: Andrii Nakryiko andriin@fb.com
[ Upstream commit eed7818adf03e874994b966aa33bc00204dd275a ]
Fix btf_dump test cases by hard-coding BPF's pointer size of 8 bytes for cases where it's impossible to deterimne the pointer size (no long type in BTF). In cases where it's known, validate libbpf correctly determines it as 8.
Signed-off-by: Andrii Nakryiko andriin@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/bpf/20200813204945.1020225-6-andriin@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/bpf/prog_tests/btf_dump.c | 27 ++++++++++++++----- 1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/btf_dump.c b/tools/testing/selftests/bpf/prog_tests/btf_dump.c index cb33a7ee4e04f..39fb81d9daeb5 100644 --- a/tools/testing/selftests/bpf/prog_tests/btf_dump.c +++ b/tools/testing/selftests/bpf/prog_tests/btf_dump.c @@ -12,15 +12,16 @@ void btf_dump_printf(void *ctx, const char *fmt, va_list args) static struct btf_dump_test_case { const char *name; const char *file; + bool known_ptr_sz; struct btf_dump_opts opts; } btf_dump_test_cases[] = { - {"btf_dump: syntax", "btf_dump_test_case_syntax", {}}, - {"btf_dump: ordering", "btf_dump_test_case_ordering", {}}, - {"btf_dump: padding", "btf_dump_test_case_padding", {}}, - {"btf_dump: packing", "btf_dump_test_case_packing", {}}, - {"btf_dump: bitfields", "btf_dump_test_case_bitfields", {}}, - {"btf_dump: multidim", "btf_dump_test_case_multidim", {}}, - {"btf_dump: namespacing", "btf_dump_test_case_namespacing", {}}, + {"btf_dump: syntax", "btf_dump_test_case_syntax", true, {}}, + {"btf_dump: ordering", "btf_dump_test_case_ordering", false, {}}, + {"btf_dump: padding", "btf_dump_test_case_padding", true, {}}, + {"btf_dump: packing", "btf_dump_test_case_packing", true, {}}, + {"btf_dump: bitfields", "btf_dump_test_case_bitfields", true, {}}, + {"btf_dump: multidim", "btf_dump_test_case_multidim", false, {}}, + {"btf_dump: namespacing", "btf_dump_test_case_namespacing", false, {}}, };
static int btf_dump_all_types(const struct btf *btf, @@ -62,6 +63,18 @@ static int test_btf_dump_case(int n, struct btf_dump_test_case *t) goto done; }
+ /* tests with t->known_ptr_sz have no "long" or "unsigned long" type, + * so it's impossible to determine correct pointer size; but if they + * do, it should be 8 regardless of host architecture, becaues BPF + * target is always 64-bit + */ + if (!t->known_ptr_sz) { + btf__set_pointer_size(btf, 8); + } else { + CHECK(btf__pointer_size(btf) != 8, "ptr_sz", "exp %d, got %zu\n", + 8, btf__pointer_size(btf)); + } + snprintf(out_file, sizeof(out_file), "/tmp/%s.output.XXXXXX", t->file); fd = mkstemp(out_file); if (CHECK(fd < 0, "create_tmp", "failed to create file: %d\n", fd)) {
From: Andrii Nakryiko andriin@fb.com
[ Upstream commit 5705d705832f74395c5465ce93192688f543006a ]
Ensure that types are memory layout- and field alignment-compatible regardless of 32/64-bitness mix of libbpf and BPF architecture.
Signed-off-by: Andrii Nakryiko andriin@fb.com Signed-off-by: Alexei Starovoitov ast@kernel.org Link: https://lore.kernel.org/bpf/20200813204945.1020225-8-andriin@fb.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/bpf/prog_tests/core_reloc.c | 20 +++--- .../selftests/bpf/progs/core_reloc_types.h | 69 ++++++++++--------- 2 files changed, 47 insertions(+), 42 deletions(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/core_reloc.c b/tools/testing/selftests/bpf/prog_tests/core_reloc.c index 084ed26a7d78c..a54eafc5e4b31 100644 --- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c +++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c @@ -237,8 +237,8 @@ .union_sz = sizeof(((type *)0)->union_field), \ .arr_sz = sizeof(((type *)0)->arr_field), \ .arr_elem_sz = sizeof(((type *)0)->arr_field[0]), \ - .ptr_sz = sizeof(((type *)0)->ptr_field), \ - .enum_sz = sizeof(((type *)0)->enum_field), \ + .ptr_sz = 8, /* always 8-byte pointer for BPF */ \ + .enum_sz = sizeof(((type *)0)->enum_field), \ }
#define SIZE_CASE(name) { \ @@ -432,20 +432,20 @@ static struct core_reloc_test_case test_cases[] = { .sb4 = -1, .sb20 = -0x17654321, .u32 = 0xBEEF, - .s32 = -0x3FEDCBA987654321, + .s32 = -0x3FEDCBA987654321LL, }), BITFIELDS_CASE(bitfields___bitfield_vs_int, { - .ub1 = 0xFEDCBA9876543210, + .ub1 = 0xFEDCBA9876543210LL, .ub2 = 0xA6, - .ub7 = -0x7EDCBA987654321, - .sb4 = -0x6123456789ABCDE, - .sb20 = 0xD00D, + .ub7 = -0x7EDCBA987654321LL, + .sb4 = -0x6123456789ABCDELL, + .sb20 = 0xD00DLL, .u32 = -0x76543, - .s32 = 0x0ADEADBEEFBADB0B, + .s32 = 0x0ADEADBEEFBADB0BLL, }), BITFIELDS_CASE(bitfields___just_big_enough, { - .ub1 = 0xF, - .ub2 = 0x0812345678FEDCBA, + .ub1 = 0xFLL, + .ub2 = 0x0812345678FEDCBALL, }), BITFIELDS_ERR_CASE(bitfields___err_too_big_bitfield),
diff --git a/tools/testing/selftests/bpf/progs/core_reloc_types.h b/tools/testing/selftests/bpf/progs/core_reloc_types.h index 6d598cfbdb3e2..f9da9f62c4b34 100644 --- a/tools/testing/selftests/bpf/progs/core_reloc_types.h +++ b/tools/testing/selftests/bpf/progs/core_reloc_types.h @@ -1,5 +1,10 @@ #include <stdint.h> #include <stdbool.h> + +void preserce_ptr_sz_fn(long x) {} + +#define __bpf_aligned __attribute__((aligned(8))) + /* * KERNEL */ @@ -444,51 +449,51 @@ struct core_reloc_primitives { char a; int b; enum core_reloc_primitives_enum c; - void *d; - int (*f)(const char *); + void *d __bpf_aligned; + int (*f)(const char *) __bpf_aligned; };
struct core_reloc_primitives___diff_enum_def { char a; int b; - void *d; - int (*f)(const char *); + void *d __bpf_aligned; + int (*f)(const char *) __bpf_aligned; enum { X = 100, Y = 200, - } c; /* inline enum def with differing set of values */ + } c __bpf_aligned; /* inline enum def with differing set of values */ };
struct core_reloc_primitives___diff_func_proto { - void (*f)(int); /* incompatible function prototype */ - void *d; - enum core_reloc_primitives_enum c; + void (*f)(int) __bpf_aligned; /* incompatible function prototype */ + void *d __bpf_aligned; + enum core_reloc_primitives_enum c __bpf_aligned; int b; char a; };
struct core_reloc_primitives___diff_ptr_type { - const char * const d; /* different pointee type + modifiers */ - char a; + const char * const d __bpf_aligned; /* different pointee type + modifiers */ + char a __bpf_aligned; int b; enum core_reloc_primitives_enum c; - int (*f)(const char *); + int (*f)(const char *) __bpf_aligned; };
struct core_reloc_primitives___err_non_enum { char a[1]; int b; int c; /* int instead of enum */ - void *d; - int (*f)(const char *); + void *d __bpf_aligned; + int (*f)(const char *) __bpf_aligned; };
struct core_reloc_primitives___err_non_int { char a[1]; - int *b; /* ptr instead of int */ - enum core_reloc_primitives_enum c; - void *d; - int (*f)(const char *); + int *b __bpf_aligned; /* ptr instead of int */ + enum core_reloc_primitives_enum c __bpf_aligned; + void *d __bpf_aligned; + int (*f)(const char *) __bpf_aligned; };
struct core_reloc_primitives___err_non_ptr { @@ -496,7 +501,7 @@ struct core_reloc_primitives___err_non_ptr { int b; enum core_reloc_primitives_enum c; int d; /* int instead of ptr */ - int (*f)(const char *); + int (*f)(const char *) __bpf_aligned; };
/* @@ -507,7 +512,7 @@ struct core_reloc_mods_output { };
typedef const int int_t; -typedef const char *char_ptr_t; +typedef const char *char_ptr_t __bpf_aligned; typedef const int arr_t[7];
struct core_reloc_mods_substruct { @@ -523,9 +528,9 @@ typedef struct { struct core_reloc_mods { int a; int_t b; - char *c; + char *c __bpf_aligned; char_ptr_t d; - int e[3]; + int e[3] __bpf_aligned; arr_t f; struct core_reloc_mods_substruct g; core_reloc_mods_substruct_t h; @@ -535,9 +540,9 @@ struct core_reloc_mods { struct core_reloc_mods___mod_swap { int b; int_t a; - char *d; + char *d __bpf_aligned; char_ptr_t c; - int f[3]; + int f[3] __bpf_aligned; arr_t e; struct { int y; @@ -555,7 +560,7 @@ typedef arr1_t arr2_t; typedef arr2_t arr3_t; typedef arr3_t arr4_t;
-typedef const char * const volatile fancy_char_ptr_t; +typedef const char * const volatile fancy_char_ptr_t __bpf_aligned;
typedef core_reloc_mods_substruct_t core_reloc_mods_substruct_tt;
@@ -567,7 +572,7 @@ struct core_reloc_mods___typedefs { arr4_t e; fancy_char_ptr_t d; fancy_char_ptr_t c; - int3_t b; + int3_t b __bpf_aligned; int3_t a; };
@@ -739,19 +744,19 @@ struct core_reloc_bitfields___bit_sz_change { int8_t sb4: 1; /* 4 -> 1 */ int32_t sb20: 30; /* 20 -> 30 */ /* non-bitfields */ - uint16_t u32; /* 32 -> 16 */ - int64_t s32; /* 32 -> 64 */ + uint16_t u32; /* 32 -> 16 */ + int64_t s32 __bpf_aligned; /* 32 -> 64 */ };
/* turn bitfield into non-bitfield and vice versa */ struct core_reloc_bitfields___bitfield_vs_int { uint64_t ub1; /* 3 -> 64 non-bitfield */ uint8_t ub2; /* 20 -> 8 non-bitfield */ - int64_t ub7; /* 7 -> 64 non-bitfield signed */ - int64_t sb4; /* 4 -> 64 non-bitfield signed */ - uint64_t sb20; /* 20 -> 16 non-bitfield unsigned */ - int32_t u32: 20; /* 32 non-bitfield -> 20 bitfield */ - uint64_t s32: 60; /* 32 non-bitfield -> 60 bitfield */ + int64_t ub7 __bpf_aligned; /* 7 -> 64 non-bitfield signed */ + int64_t sb4 __bpf_aligned; /* 4 -> 64 non-bitfield signed */ + uint64_t sb20 __bpf_aligned; /* 20 -> 16 non-bitfield unsigned */ + int32_t u32: 20; /* 32 non-bitfield -> 20 bitfield */ + uint64_t s32: 60 __bpf_aligned; /* 32 non-bitfield -> 60 bitfield */ };
struct core_reloc_bitfields___just_big_enough {
From: Oleksij Rempel o.rempel@pengutronix.de
[ Upstream commit e052d0540298bfe0f6cbbecdc7e2ea9b859575b2 ]
Since the stack relays on receiving own packets, it was overwriting own transmit buffer from received packets.
At least theoretically, the received echo buffer can be corrupt or changed and the session partner can request to resend previous data. In this case we will re-send bad data.
With this patch we will stop to overwrite own TX buffer and use it for sanity checking.
Signed-off-by: Oleksij Rempel o.rempel@pengutronix.de Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- net/can/j1939/transport.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c index 9f99af5b0b11e..3e9c377b0dcce 100644 --- a/net/can/j1939/transport.c +++ b/net/can/j1939/transport.c @@ -1769,7 +1769,20 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session, }
tpdat = se_skb->data; - memcpy(&tpdat[offset], &dat[1], nbytes); + if (!session->transmission) { + memcpy(&tpdat[offset], &dat[1], nbytes); + } else { + int err; + + err = memcmp(&tpdat[offset], &dat[1], nbytes); + if (err) + netdev_err_once(priv->ndev, + "%s: 0x%p: Data of RX-looped back packet (%*ph) doesn't match TX data (%*ph)!\n", + __func__, session, + nbytes, &dat[1], + nbytes, &tpdat[offset]); + } + if (packet == session->pkt.rx) session->pkt.rx++;
From: Xie He xie.he.0141@gmail.com
[ Upstream commit 77b981c82c1df7c7ad32a046f17f007450b46954 ]
1. Added a skb->len check
This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists.
2. Added needed_headroom and set hard_header_len to 0
When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes. So the value of needed_headroom in this driver should be 3 - 1.
Because this driver has no header_ops, according to the logic of af_packet.c, the value of hard_header_len should be 0.
Reason of setting needed_headroom and hard_header_len at this place:
This driver is written using the API of the hdlc module, the hdlc module enables this driver (the protocol driver) to run on any hardware that has a driver (the hardware driver) written using the API of the hdlc module.
Two other hdlc protocol drivers - hdlc_ppp and hdlc_raw_eth, also set things like hard_header_len at this place. In hdlc_ppp, it sets hard_header_len after attach_hdlc_protocol and before setting dev->type. In hdlc_raw_eth, it sets hard_header_len by calling ether_setup after attach_hdlc_protocol and after memcpy the settings.
3. Reset needed_headroom when detaching protocols (in hdlc.c)
When detaching a protocol from a hardware device, the hdlc module will reset various parameters of the device (including hard_header_len) to the default values. We add needed_headroom here so that needed_headroom will also be reset.
Cc: Willem de Bruijn willemdebruijn.kernel@gmail.com Cc: Martin Schiller ms@dev.tdt.de Cc: Andrew Hendry andrew.hendry@gmail.com Signed-off-by: Xie He xie.he.0141@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/hdlc.c | 1 + drivers/net/wan/hdlc_x25.c | 17 ++++++++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index dfc16770458d8..386ed2aa31fd9 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -230,6 +230,7 @@ static void hdlc_setup_dev(struct net_device *dev) dev->max_mtu = HDLC_MAX_MTU; dev->type = ARPHRD_RAWHDLC; dev->hard_header_len = 16; + dev->needed_headroom = 0; dev->addr_len = 0; dev->header_ops = &hdlc_null_ops; } diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c index f70336bb6f524..f52b9fed05931 100644 --- a/drivers/net/wan/hdlc_x25.c +++ b/drivers/net/wan/hdlc_x25.c @@ -107,8 +107,14 @@ static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev) { int result;
+ /* There should be a pseudo header of 1 byte added by upper layers. + * Check to make sure it is there before reading it. + */ + if (skb->len < 1) { + kfree_skb(skb); + return NETDEV_TX_OK; + }
- /* X.25 to LAPB */ switch (skb->data[0]) { case X25_IFACE_DATA: /* Data to be transmitted */ skb_pull(skb, 1); @@ -294,6 +300,15 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr) return result;
memcpy(&state(hdlc)->settings, &new_settings, size); + + /* There's no header_ops so hard_header_len should be 0. */ + dev->hard_header_len = 0; + /* When transmitting data: + * first we'll remove a pseudo header of 1 byte, + * then we'll prepend an LAPB header of at most 3 bytes. + */ + dev->needed_headroom = 3 - 1; + dev->type = ARPHRD_X25; call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev); netif_dormant_off(dev);
From: Mike Pozulp pozulp.kernel@gmail.com
[ Upstream commit 23dc958689449be85e39351a8c809c3d344b155b ]
The very quiet and distorted headphone output bug that afflicted my Samsung Notebook 9 is appearing in many other Samsung laptops. Expose the quirk which fixed my laptop as a model so other users can try it.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423 Signed-off-by: Mike Pozulp pozulp.kernel@gmail.com Link: https://lore.kernel.org/r/20200817043219.458889-1-pozulp.kernel@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 313eecfb91b44..e2bb0b6986182 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7926,6 +7926,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC299_FIXUP_PREDATOR_SPK, .name = "predator-spk"}, {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"}, + {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"}, {} }; #define ALC225_STANDARD_PINS \
From: Vineeth Vijayan vneethv@linux.ibm.com
[ Upstream commit 0b8eb2ee9da1e8c9b8082f404f3948aa82a057b2 ]
The scanning through subchannels during the time of an event could take significant amount of time in case of platforms with lots of known subchannels. This might result in higher scheduling latencies for other tasks especially on systems with a single CPU. Add cond_resched() call, as the loop in slow_eval_known_fn() can be executed for a longer duration.
Reviewed-by: Peter Oberparleiter oberpar@linux.ibm.com Signed-off-by: Vineeth Vijayan vneethv@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/css.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c index 94edbb33d0d1f..aca022239b333 100644 --- a/drivers/s390/cio/css.c +++ b/drivers/s390/cio/css.c @@ -677,6 +677,11 @@ static int slow_eval_known_fn(struct subchannel *sch, void *data) rc = css_evaluate_known_subchannel(sch, 1); if (rc == -EAGAIN) css_schedule_eval(sch->schid); + /* + * The loop might take long time for platforms with lots of + * known devices. Allow scheduling here. + */ + cond_resched(); } return 0; }
From: Sylwester Nawrocki s.nawrocki@samsung.com
[ Upstream commit f082bb59b72039a2326ec1a44496899fb8aa6d0e ]
The driver supports WM1811, WM8994, WM8958 devices but according to documentation and the regmap definitions the WM8958_DSP2_* registers are only available on WM8958. In current code these registers are being accessed as if they were available on all the three chips.
When starting playback on WM1811 CODEC multiple errors like: "wm8994-codec wm8994-codec: ASoC: error at soc_component_read_no_lock on wm8994-codec: -5" can be seen, which is caused by attempts to read an unavailable WM8958_DSP2_PROGRAM register. The issue has been uncovered by recent commit "e2329ee ASoC: soc-component: add soc_component_err()".
This patch adds a check in wm8958_aif_ev() callback so the DSP2 handling is only done for WM8958.
Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20200731173834.23832-1-s.nawrocki@samsung.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm8958-dsp2.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c index ca42445b649d4..b471892d84778 100644 --- a/sound/soc/codecs/wm8958-dsp2.c +++ b/sound/soc/codecs/wm8958-dsp2.c @@ -412,8 +412,12 @@ int wm8958_aif_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct wm8994 *control = dev_get_drvdata(component->dev->parent); int i;
+ if (control->type != WM8958) + return 0; + switch (event) { case SND_SOC_DAPM_POST_PMU: case SND_SOC_DAPM_PRE_PMU:
From: Tom Yan tom.ty89@gmail.com
[ Upstream commit d8d0db7bb358ef65d60726a61bfcd08eccff0bc0 ]
Some devices have broken extension unit where getting current value doesn't work. Attempt that once when creating mixer control for it. If it fails, just ignore it, so that it won't cripple the device entirely (and/or make the error floods).
Signed-off-by: Tom Yan tom.ty89@gmail.com Link: https://lore.kernel.org/r/5f3abc52.1c69fb81.9cf2.fe91@mx.google.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/mixer.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index eab0fd4fd7c33..e0b7174c10430 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2367,7 +2367,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, int num_ins; struct usb_mixer_elem_info *cval; struct snd_kcontrol *kctl; - int i, err, nameid, type, len; + int i, err, nameid, type, len, val; const struct procunit_info *info; const struct procunit_value_info *valinfo; const struct usbmix_name_map *map; @@ -2470,6 +2470,12 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, break; }
+ err = get_cur_ctl_value(cval, cval->control << 8, &val); + if (err < 0) { + usb_mixer_elem_info_free(cval); + return -EINVAL; + } + kctl = snd_ctl_new1(&mixer_procunit_ctl, cval); if (!kctl) { usb_mixer_elem_info_free(cval);
From: David Ahern dsahern@kernel.org
[ Upstream commit bcf7ddb0186d366f761f86196b480ea6dd2dc18c ]
h1 is initially configured to reach h2 via r1 rather than the more direct path through r2. If rp_filter is set and inherited for r2, forwarding fails since the source address of h1 is reachable from eth0 vs the packet coming to it via r1 and eth1. Since rp_filter setting affects the test, explicitly reset it.
Signed-off-by: David Ahern dsahern@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/net/icmp_redirect.sh | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh index 18c5de53558af..bf361f30d6ef9 100755 --- a/tools/testing/selftests/net/icmp_redirect.sh +++ b/tools/testing/selftests/net/icmp_redirect.sh @@ -180,6 +180,8 @@ setup() ;; r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1 ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1 + ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0 + ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1 ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
From: Mike Christie michael.christie@oracle.com
[ Upstream commit fa39ab5184d64563cd36f2fb5f0d3fbad83a432c ]
ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of GFP_KERNEL.
Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie@... cc: Hannes Reinecke hare@suse.de Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Mike Christie michael.christie@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index ec7a11d13fdc0..9e70b9a674409 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -192,7 +192,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid, }
/* alloc the udl from per cpu ddp pool */ - ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_KERNEL, &ddp->udp); + ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp); if (!ddp->udl) { e_err(drv, "failed allocated ddp context\n"); goto out_noddp_unmap;
From: Stanley Chu stanley.chu@mediatek.com
[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ]
In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow.
Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state.
Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman avri.altman@wdc.com Co-developed-by: Andy Teng andy.teng@mediatek.com Signed-off-by: Andy Teng andy.teng@mediatek.com Signed-off-by: Stanley Chu stanley.chu@mediatek.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 477b6cfff381b..a61f95ffd45fd 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -1540,6 +1540,7 @@ static void ufshcd_ungate_work(struct work_struct *work) int ufshcd_hold(struct ufs_hba *hba, bool async) { int rc = 0; + bool flush_result; unsigned long flags;
if (!ufshcd_is_clkgating_allowed(hba)) @@ -1571,7 +1572,9 @@ int ufshcd_hold(struct ufs_hba *hba, bool async) break; } spin_unlock_irqrestore(hba->host->host_lock, flags); - flush_work(&hba->clk_gating.ungate_work); + flush_result = flush_work(&hba->clk_gating.ungate_work); + if (hba->clk_gating.is_suspended && !flush_result) + goto out; spin_lock_irqsave(hba->host->host_lock, flags); goto start; }
From: Adrian Hunter adrian.hunter@intel.com
[ Upstream commit 127d5f7c4b653b8be5eb3b2c7bbe13728f9003ff ]
For shared interrupts, the interrupt status might be zero, so check that first.
Link: https://lore.kernel.org/r/20200811133936.19171-2-adrian.hunter@intel.com Reviewed-by: Avri Altman avri.altman@wdc.com Signed-off-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index a61f95ffd45fd..93c8d1caeba2b 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -5677,7 +5677,7 @@ static irqreturn_t ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) */ static irqreturn_t ufshcd_intr(int irq, void *__hba) { - u32 intr_status, enabled_intr_status; + u32 intr_status, enabled_intr_status = 0; irqreturn_t retval = IRQ_NONE; struct ufs_hba *hba = __hba; int retries = hba->nutrs; @@ -5691,7 +5691,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba) * read, make sure we handle them by checking the interrupt status * again in a loop until we process all of the reqs before returning. */ - do { + while (intr_status && retries--) { enabled_intr_status = intr_status & ufshcd_readl(hba, REG_INTERRUPT_ENABLE); if (intr_status) @@ -5700,7 +5700,7 @@ static irqreturn_t ufshcd_intr(int irq, void *__hba) retval |= ufshcd_sl_intr(hba, enabled_intr_status);
intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); - } while (intr_status && --retries); + }
if (retval == IRQ_NONE) { dev_err(hba->dev, "%s: Unhandled interrupt 0x%08x\n",
From: Stanley Chu stanley.chu@mediatek.com
[ Upstream commit b10178ee7fa88b68a9e8adc06534d2605cb0ec23 ]
If somehow no interrupt notification is raised for a completed request and its doorbell bit is cleared by host, UFS driver needs to cleanup its outstanding bit in ufshcd_abort(). Otherwise, system may behave abnormally in the following scenario:
After ufshcd_abort() returns, this request will be requeued by SCSI layer with its outstanding bit set. Any future completed request will trigger ufshcd_transfer_req_compl() to handle all "completed outstanding bits". At this time the "abnormal outstanding bit" will be detected and the "requeued request" will be chosen to execute request post-processing flow. This is wrong because this request is still "alive".
Link: https://lore.kernel.org/r/20200811141859.27399-2-huobean@gmail.com Reviewed-by: Can Guo cang@codeaurora.org Acked-by: Avri Altman avri.altman@wdc.com Signed-off-by: Stanley Chu stanley.chu@mediatek.com Signed-off-by: Bean Huo beanhuo@micron.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufshcd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index 93c8d1caeba2b..a36f003d00af1 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -6227,7 +6227,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) /* command completed already */ dev_err(hba->dev, "%s: cmd at tag %d successfully cleared from DB.\n", __func__, tag); - goto out; + goto cleanup; } else { dev_err(hba->dev, "%s: no response from device. tag = %d, err %d\n", @@ -6261,6 +6261,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd) goto out; }
+cleanup: scsi_dma_unmap(cmd);
spin_lock_irqsave(host->host_lock, flags);
From: Quinn Tran qutran@marvell.com
[ Upstream commit 10ae30ba664822f62de169a61628e31c999c7cc8 ]
On Zone Disable, certain switches would ignore all commands. This causes timeout for both switch scan command and abort of that command. On detection of this condition, all sessions will be shutdown.
Link: https://lore.kernel.org/r/20200806111014.28434-2-njavali@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_gs.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index df670fba2ab8a..c6b6a3250312e 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3736,6 +3736,18 @@ static void qla2x00_async_gpnft_gnnft_sp_done(srb_t *sp, int res) unsigned long flags; const char *name = sp->name;
+ if (res == QLA_OS_TIMER_EXPIRED) { + /* switch is ignoring all commands. + * This might be a zone disable behavior. + * This means we hit 64s timeout. + * 22s GPNFT + 44s Abort = 64s + */ + ql_dbg(ql_dbg_disc, vha, 0xffff, + "%s: Switch Zone check please .\n", + name); + qla2x00_mark_all_devices_lost(vha); + } + /* * We are in an Interrupt context, queue up this * sp for GNNFT_DONE work. This will allow all
From: Quinn Tran qutran@marvell.com
[ Upstream commit a117579d0205b5a0592a3a98493e2b875e4da236 ]
Perform implicit logout to flush I/O on zone disable.
Link: https://lore.kernel.org/r/20200806111014.28434-3-njavali@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Himanshu Madhani hmadhani@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_gs.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index c6b6a3250312e..7074073446701 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3436,7 +3436,6 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp) list_for_each_entry(fcport, &vha->vp_fcports, list) { if ((fcport->flags & FCF_FABRIC_DEVICE) != 0) { fcport->scan_state = QLA_FCPORT_SCAN; - fcport->logout_on_delete = 0; } } goto login_logout;
From: Quinn Tran qutran@marvell.com
[ Upstream commit 4709272f6327cc4a8ee1dc55771bcf9718346980 ]
Correct the supported speeds for 16G Mezz card.
Link: https://lore.kernel.org/r/20200806111014.28434-4-njavali@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_gs.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 7074073446701..3bfb5678f6515 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -1505,11 +1505,11 @@ qla2x00_prep_ct_fdmi_req(struct ct_sns_pkt *p, uint16_t cmd, static uint qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha) { + uint speeds = 0; + if (IS_CNA_CAPABLE(ha)) return FDMI_PORT_SPEED_10GB; if (IS_QLA28XX(ha) || IS_QLA27XX(ha)) { - uint speeds = 0; - if (ha->max_supported_speed == 2) { if (ha->min_supported_speed <= 6) speeds |= FDMI_PORT_SPEED_64GB; @@ -1536,9 +1536,16 @@ qla25xx_fdmi_port_speed_capability(struct qla_hw_data *ha) } return speeds; } - if (IS_QLA2031(ha)) - return FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB| - FDMI_PORT_SPEED_4GB; + if (IS_QLA2031(ha)) { + if ((ha->pdev->subsystem_vendor == 0x103C) && + (ha->pdev->subsystem_device == 0x8002)) { + speeds = FDMI_PORT_SPEED_16GB; + } else { + speeds = FDMI_PORT_SPEED_16GB|FDMI_PORT_SPEED_8GB| + FDMI_PORT_SPEED_4GB; + } + return speeds; + } if (IS_QLA25XX(ha)) return FDMI_PORT_SPEED_8GB|FDMI_PORT_SPEED_4GB| FDMI_PORT_SPEED_2GB|FDMI_PORT_SPEED_1GB;
From: Quinn Tran qutran@marvell.com
[ Upstream commit abb31aeaa9b20680b0620b23fea5475ea4591e31 ]
Multipath errors were seen during failback due to login timeout. The remote device sent LOGO, the local host tore down the session and did relogin. The RSCN arrived indicates remote device is going through failover after which the relogin is in a 20s timeout phase. At this point the driver is stuck in the relogin process. Add a fix to delete the session as part of abort/flush the login.
Link: https://lore.kernel.org/r/20200806111014.28434-5-njavali@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_gs.c | 18 +++++++++++++++--- drivers/scsi/qla2xxx/qla_target.c | 2 +- 2 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c index 3bfb5678f6515..de9fd7f688d01 100644 --- a/drivers/scsi/qla2xxx/qla_gs.c +++ b/drivers/scsi/qla2xxx/qla_gs.c @@ -3538,10 +3538,22 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp) }
if (fcport->scan_state != QLA_FCPORT_FOUND) { + bool do_delete = false; + + if (fcport->scan_needed && + fcport->disc_state == DSC_LOGIN_PEND) { + /* Cable got disconnected after we sent + * a login. Do delete to prevent timeout. + */ + fcport->logout_on_delete = 1; + do_delete = true; + } + fcport->scan_needed = 0; - if ((qla_dual_mode_enabled(vha) || - qla_ini_mode_enabled(vha)) && - atomic_read(&fcport->state) == FCS_ONLINE) { + if (((qla_dual_mode_enabled(vha) || + qla_ini_mode_enabled(vha)) && + atomic_read(&fcport->state) == FCS_ONLINE) || + do_delete) { if (fcport->loop_id != FC_NO_LOOP_ID) { if (fcport->flags & FCF_FCP2_DEVICE) fcport->logout_on_delete = 0; diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c index 622e7337affc4..bc9082dcb628e 100644 --- a/drivers/scsi/qla2xxx/qla_target.c +++ b/drivers/scsi/qla2xxx/qla_target.c @@ -1270,7 +1270,7 @@ void qlt_schedule_sess_for_deletion(struct fc_port *sess)
qla24xx_chk_fcp_state(sess);
- ql_dbg(ql_dbg_tgt, sess->vha, 0xe001, + ql_dbg(ql_dbg_disc, sess->vha, 0xe001, "Scheduling sess %p for deletion %8phC\n", sess, sess->port_name);
From: Saurav Kashyap skashyap@marvell.com
[ Upstream commit dffa11453313a115157b19021cc2e27ea98e624c ]
OS boot during Boot from SAN was stuck at dracut emergency shell after enabling NVMe driver parameter. For non-MQ support the driver was enabling MQ. Add a check to confirm if FW supports MQ.
Link: https://lore.kernel.org/r/20200806111014.28434-9-njavali@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Saurav Kashyap skashyap@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_os.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 1120d133204c2..7a4a65a9ba441 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2017,6 +2017,11 @@ qla2x00_iospace_config(struct qla_hw_data *ha) /* Determine queue resources */ ha->max_req_queues = ha->max_rsp_queues = 1; ha->msix_count = QLA_BASE_VECTORS; + + /* Check if FW supports MQ or not */ + if (!(ha->fw_attributes & BIT_6)) + goto mqiobase_exit; + if (!ql2xmqsupport || !ql2xnvmeenable || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))) goto mqiobase_exit;
From: Quinn Tran qutran@marvell.com
[ Upstream commit 83949613fac61e8e37eadf8275bf072342302f4e ]
NVMEAsync command is being submitted to QLA while the same NVMe controller is in the middle of reset. The reset path has deleted the association and freed aen_op->fcp_req.private. Add a check for this private pointer before issuing the command.
... 6 [ffffb656ca11fce0] page_fault at ffffffff8c00114e [exception RIP: qla_nvme_post_cmd+394] RIP: ffffffffc0d012ba RSP: ffffb656ca11fd98 RFLAGS: 00010206 RAX: ffff8fb039eda228 RBX: ffff8fb039eda200 RCX: 00000000000da161 RDX: ffffffffc0d4d0f0 RSI: ffffffffc0d26c9b RDI: ffff8fb039eda220 RBP: 0000000000000013 R8: ffff8fb47ff6aa80 R9: 0000000000000002 R10: 0000000000000000 R11: ffffb656ca11fdc8 R12: ffff8fb27d04a3b0 R13: ffff8fc46dd98a58 R14: 0000000000000000 R15: ffff8fc4540f0000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffffb656ca11fe08] nvme_fc_start_fcp_op at ffffffffc0241568 [nvme_fc] 8 [ffffb656ca11fe50] nvme_fc_submit_async_event at ffffffffc0241901 [nvme_fc] 9 [ffffb656ca11fe68] nvme_async_event_work at ffffffffc014543d [nvme_core] 10 [ffffb656ca11fe98] process_one_work at ffffffff8b6cd437 11 [ffffb656ca11fed8] worker_thread at ffffffff8b6cdcef 12 [ffffb656ca11ff10] kthread at ffffffff8b6d3402 13 [ffffb656ca11ff50] ret_from_fork at ffffffff8c000255
-- PID: 37824 TASK: ffff8fb033063d80 CPU: 20 COMMAND: "kworker/u97:451" 0 [ffffb656ce1abc28] __schedule at ffffffff8be629e3 1 [ffffb656ce1abcc8] schedule at ffffffff8be62fe8 2 [ffffb656ce1abcd0] schedule_timeout at ffffffff8be671ed 3 [ffffb656ce1abd70] wait_for_completion at ffffffff8be639cf 4 [ffffb656ce1abdd0] flush_work at ffffffff8b6ce2d5 5 [ffffb656ce1abe70] nvme_stop_ctrl at ffffffffc0144900 [nvme_core] 6 [ffffb656ce1abe80] nvme_fc_reset_ctrl_work at ffffffffc0243445 [nvme_fc] 7 [ffffb656ce1abe98] process_one_work at ffffffff8b6cd437 8 [ffffb656ce1abed8] worker_thread at ffffffff8b6cdb50 9 [ffffb656ce1abf10] kthread at ffffffff8b6d3402 10 [ffffb656ce1abf50] ret_from_fork at ffffffff8c000255
Link: https://lore.kernel.org/r/20200806111014.28434-10-njavali@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Quinn Tran qutran@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_nvme.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_nvme.c b/drivers/scsi/qla2xxx/qla_nvme.c index 4886d247df6f6..1ba05d8871518 100644 --- a/drivers/scsi/qla2xxx/qla_nvme.c +++ b/drivers/scsi/qla2xxx/qla_nvme.c @@ -535,6 +535,11 @@ static int qla_nvme_post_cmd(struct nvme_fc_local_port *lport, struct nvme_private *priv = fd->private; struct qla_nvme_rport *qla_rport = rport->private;
+ if (!priv) { + /* nvme association has been torn down */ + return rval; + } + fcport = qla_rport->fcport;
if (!qpair || !fcport || (qpair && !qpair->fw_started) ||
From: Saurav Kashyap skashyap@marvell.com
[ Upstream commit de7e6194301ad31c4ce95395eb678e51a1b907e5 ]
FCoE adapter initialization failed for ISP8021 with the following patch applied. In addition, reproduction of the issue the patch originally tried to address has been unsuccessful.
This reverts commit 3cb182b3fa8b7a61f05c671525494697cba39c6a.
Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.com Reviewed-by: Himanshu Madhani himanshu.madhani@oracle.com Signed-off-by: Saurav Kashyap skashyap@marvell.com Signed-off-by: Nilesh Javali njavali@marvell.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/qla2xxx/qla_mbx.c | 8 -------- 1 file changed, 8 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index d6c991bd1bde9..35720cdfb9c32 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -334,14 +334,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (time_after(jiffies, wait_time)) break;
- /* - * Check if it's UNLOADING, cause we cannot poll in - * this case, or else a NULL pointer dereference - * is triggered. - */ - if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) - return QLA_FUNCTION_TIMEOUT; - /* Check for pending interrupts. */ qla2x00_poll(ha->rsp_q_map[0]);
From: Alvin Šipraga alsi@bang-olufsen.dk
[ Upstream commit 8b61fba503904acae24aeb2bd5569b4d6544d48f ]
Remote source MAC addresses can be set on a 'source mode' macvlan interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit tightens the validation of these MAC addresses to match the validation already performed when setting or adding a single MAC address via the IFLA_MACVLAN_MACADDR attribute.
iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set' command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command, which demonstrates the inconsistent behaviour that this commit addresses:
# ip link add link eth0 name macvlan0 type macvlan mode source # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00 RTNETLINK answers: Cannot assign requested address # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00 # ip -d link show macvlan0 5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ... link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0 macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...
With this change, the 'set' command will (rightly) fail in the same way as the 'add' command.
Signed-off-by: Alvin Šipraga alsi@bang-olufsen.dk Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/macvlan.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index e900ebb94499d..b0c34906cad47 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1259,6 +1259,9 @@ static void macvlan_port_destroy(struct net_device *dev) static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[], struct netlink_ext_ack *extack) { + struct nlattr *nla, *head; + int rem, len; + if (tb[IFLA_ADDRESS]) { if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN) return -EINVAL; @@ -1306,6 +1309,20 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[], return -EADDRNOTAVAIL; }
+ if (data[IFLA_MACVLAN_MACADDR_DATA]) { + head = nla_data(data[IFLA_MACVLAN_MACADDR_DATA]); + len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]); + + nla_for_each_attr(nla, head, len, rem) { + if (nla_type(nla) != IFLA_MACVLAN_MACADDR || + nla_len(nla) != ETH_ALEN) + return -EINVAL; + + if (!is_valid_ether_addr(nla_data(nla))) + return -EADDRNOTAVAIL; + } + } + if (data[IFLA_MACVLAN_MACADDR_COUNT]) return -EINVAL;
@@ -1362,10 +1379,6 @@ static int macvlan_changelink_sources(struct macvlan_dev *vlan, u32 mode, len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
nla_for_each_attr(nla, head, len, rem) { - if (nla_type(nla) != IFLA_MACVLAN_MACADDR || - nla_len(nla) != ETH_ALEN) - continue; - addr = nla_data(nla); ret = macvlan_hash_add_source(vlan, addr); if (ret)
From: Sumera Priyadarsini sylphrenadin@gmail.com
[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ]
Every iteration of for_each_available_child_of_node() decrements reference count of the previous node, however when control is transferred from the middle of the loop, as in the case of a return or break or goto, there is no decrement thus ultimately resulting in a memory leak.
Fix a potential memory leak in gianfar.c by inserting of_node_put() before the goto statement.
Issue found with Coccinelle.
Signed-off-by: Sumera Priyadarsini sylphrenadin@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/gianfar.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index b3c69e9038eac..d20d865979abd 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -750,8 +750,10 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev) continue;
err = gfar_parse_group(child, priv, model); - if (err) + if (err) { + of_node_put(child); goto err_grp_init; + } } } else { /* SQ_SG_MODE */ err = gfar_parse_group(np, priv, model);
From: Jiansong Chen Jiansong.Chen@amd.com
[ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
gfxoff is temporarily disabled for navy_flounder, since at present the feature has broken some basic amdgpu test.
Signed-off-by: Jiansong Chen Jiansong.Chen@amd.com Reviewed-by: Tao Zhou tao.zhou1@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index ff94f756978d5..8ee94f4b9b20f 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -681,6 +681,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev) if (!gfx_v10_0_navi10_gfxoff_should_enable(adev)) adev->pm.pp_feature &= ~PP_GFXOFF_MASK; break; + case CHIP_NAVY_FLOUNDER: + adev->pm.pp_feature &= ~PP_GFXOFF_MASK; + break; default: break; }
On Mon, Aug 24, 2020 at 12:37 PM Sasha Levin sashal@kernel.org wrote:
From: Jiansong Chen Jiansong.Chen@amd.com
[ Upstream commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3 ]
gfxoff is temporarily disabled for navy_flounder, since at present the feature has broken some basic amdgpu test.
Signed-off-by: Jiansong Chen Jiansong.Chen@amd.com Reviewed-by: Tao Zhou tao.zhou1@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org
Support for this chip does not exist in 5.7 or any other older trees. Please drop this.
Alex
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index ff94f756978d5..8ee94f4b9b20f 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -681,6 +681,9 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev) if (!gfx_v10_0_navi10_gfxoff_should_enable(adev)) adev->pm.pp_feature &= ~PP_GFXOFF_MASK; break;
case CHIP_NAVY_FLOUNDER:adev->pm.pp_feature &= ~PP_GFXOFF_MASK;break; default: break; }-- 2.25.1
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
From: Guchun Chen guchun.chen@amd.com
[ Upstream commit 1a68d96f81b8e7eb2a121fbf9abf9e5974e58832 ]
When unloading driver by "modprobe -r amdgpu", one NULL pointer dereference bug occurs in ras debugfs releasing. The cause is the duplicated debugfs_remove, as drm debugfs_root dir has been cleaned up already by drm_minor_unregister.
BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 11 PID: 1526 Comm: modprobe Tainted: G OE 5.6.0-guchchen #1 Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 RIP: 0010:down_write+0x15/0x40 Code: eb de e8 7e 17 72 ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 53 48 89 fb e8 92 d8 ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 43 08 5b c3 RSP: 0018:ffffb1590386fcd0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000000a0 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffffff85b2fcc2 RDI: 00000000000000a0 RBP: ffffb1590386fd30 R08: ffffffff85b2fcc2 R09: 000000000002b3c0 R10: ffff97a330618c40 R11: 00000000000005f6 R12: ffff97a3481beb40 R13: 00000000000000a0 R14: ffff97a3481beb40 R15: 0000000000000000 FS: 00007fb11a717540(0000) GS:ffff97a376cc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 00000004066d6006 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: simple_recursive_removal+0x63/0x370 ? debugfs_remove+0x60/0x60 debugfs_remove+0x40/0x60 amdgpu_ras_fini+0x82/0x230 [amdgpu] ? __kernfs_remove.part.17+0x101/0x1f0 ? kernfs_name_hash+0x12/0x80 amdgpu_device_fini+0x1c0/0x580 [amdgpu] amdgpu_driver_unload_kms+0x3e/0x70 [amdgpu] amdgpu_pci_remove+0x36/0x60 [amdgpu] pci_device_remove+0x3b/0xb0 device_release_driver_internal+0xe5/0x1c0 driver_detach+0x46/0x90 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x29/0x90 amdgpu_exit+0x11/0x25 [amdgpu] __x64_sys_delete_module+0x13d/0x210 do_syscall_64+0x5f/0x250 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Guchun Chen guchun.chen@amd.com Reviewed-by: Tao Zhou tao.zhou1@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c index cd18596b47d33..49c44178ddfae 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c @@ -1170,7 +1170,6 @@ void amdgpu_ras_debugfs_remove(struct amdgpu_device *adev, if (!obj || !obj->ent) return;
- debugfs_remove(obj->ent); obj->ent = NULL; put_obj(obj); } @@ -1184,7 +1183,6 @@ static void amdgpu_ras_debugfs_remove_all(struct amdgpu_device *adev) amdgpu_ras_debugfs_remove(adev, &obj->head); }
- debugfs_remove_recursive(con->dir); con->dir = NULL; } /* debugfs end */
From: Huang Rui ray.huang@amd.com
[ Upstream commit 34174b89bfa495bed9cddcc504fb38feca90fab7 ]
Renoir only has one sdma instance, it will get failed once query the sdma1 registers. So use switch-case instead of static register array.
Signed-off-by: Huang Rui ray.huang@amd.com Reviewed-by: Alex Deucher alexander.deucher@amd.com Reviewed-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c | 31 +++++++++++++------ 1 file changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c index df841c2ac5e74..cdcf3b8e914a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v9.c @@ -197,19 +197,32 @@ static uint32_t get_sdma_rlc_reg_offset(struct amdgpu_device *adev, unsigned int engine_id, unsigned int queue_id) { - uint32_t sdma_engine_reg_base[2] = { - SOC15_REG_OFFSET(SDMA0, 0, - mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL, - SOC15_REG_OFFSET(SDMA1, 0, - mmSDMA1_RLC0_RB_CNTL) - mmSDMA1_RLC0_RB_CNTL - }; - uint32_t retval = sdma_engine_reg_base[engine_id] + uint32_t sdma_engine_reg_base = 0; + uint32_t sdma_rlc_reg_offset; + + switch (engine_id) { + default: + dev_warn(adev->dev, + "Invalid sdma engine id (%d), using engine id 0\n", + engine_id); + fallthrough; + case 0: + sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA0, 0, + mmSDMA0_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL; + break; + case 1: + sdma_engine_reg_base = SOC15_REG_OFFSET(SDMA1, 0, + mmSDMA1_RLC0_RB_CNTL) - mmSDMA0_RLC0_RB_CNTL; + break; + } + + sdma_rlc_reg_offset = sdma_engine_reg_base + queue_id * (mmSDMA0_RLC1_RB_CNTL - mmSDMA0_RLC0_RB_CNTL);
pr_debug("RLC register offset for SDMA%d RLC%d: 0x%x\n", engine_id, - queue_id, retval); + queue_id, sdma_rlc_reg_offset);
- return retval; + return sdma_rlc_reg_offset; }
static inline struct v9_mqd *get_mqd(void *mqd)
From: Jiansong Chen Jiansong.Chen@amd.com
[ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]
This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3. Newly released sdma fw (51.52) provides a fix for the issue.
Signed-off-by: Jiansong Chen Jiansong.Chen@amd.com Reviewed-by: Kenneth Feng kenneth.feng@amd.com Reviewed-by: Tao Zhou tao.zhou1@amd.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 8ee94f4b9b20f..ff94f756978d5 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -681,9 +681,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev) if (!gfx_v10_0_navi10_gfxoff_should_enable(adev)) adev->pm.pp_feature &= ~PP_GFXOFF_MASK; break; - case CHIP_NAVY_FLOUNDER: - adev->pm.pp_feature &= ~PP_GFXOFF_MASK; - break; default: break; }
On Mon, Aug 24, 2020 at 12:37 PM Sasha Levin sashal@kernel.org wrote:
From: Jiansong Chen Jiansong.Chen@amd.com
[ Upstream commit da2446b66b5e2c7f3ab63912c8d999810e35e8b3 ]
This reverts commit 9c9b17a7d19a8e21db2e378784fff1128b46c9d3. Newly released sdma fw (51.52) provides a fix for the issue.
Signed-off-by: Jiansong Chen Jiansong.Chen@amd.com Reviewed-by: Kenneth Feng kenneth.feng@amd.com Reviewed-by: Tao Zhou tao.zhou1@amd.com Acked-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org
Support for this chip does not exist in 5.7 or any other older trees. Please drop this.
Alex
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 8ee94f4b9b20f..ff94f756978d5 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -681,9 +681,6 @@ static void gfx_v10_0_check_gfxoff_flag(struct amdgpu_device *adev) if (!gfx_v10_0_navi10_gfxoff_should_enable(adev)) adev->pm.pp_feature &= ~PP_GFXOFF_MASK; break;
case CHIP_NAVY_FLOUNDER:adev->pm.pp_feature &= ~PP_GFXOFF_MASK;break; default: break; }-- 2.25.1
amd-gfx mailing list amd-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/amd-gfx
From: Athira Rajeev atrajeev@linux.vnet.ibm.com
[ Upstream commit 17899eaf88d689529b866371344c8f269ba79b5f ]
Performance monitor interrupt handler checks if any counter has overflown and calls record_and_restart() in core-book3s which invokes perf_event_overflow() to record the sample information. Apart from creating sample, perf_event_overflow() also does the interrupt and period checks via perf_event_account_interrupt().
Currently we record information only if the SIAR (Sampled Instruction Address Register) valid bit is set (using siar_valid() check) and hence the interrupt check.
But it is possible that we do sampling for some events that are not generating valid SIAR, and hence there is no chance to disable the event if interrupts are more than max_samples_per_tick. This leads to soft lockup.
Fix this by adding perf_event_account_interrupt() in the invalid SIAR code path for a sampling event. ie if SIAR is invalid, just do interrupt check and don't record the sample information.
Reported-by: Alexey Kardashevskiy aik@ozlabs.ru Signed-off-by: Athira Rajeev atrajeev@linux.vnet.ibm.com Tested-by: Alexey Kardashevskiy aik@ozlabs.ru Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vn... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/perf/core-book3s.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 3dcfecf858f36..5216c5a7f46da 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -2099,6 +2099,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
if (perf_event_overflow(event, &data, regs)) power_pmu_stop(event, 0); + } else if (period) { + /* Account for interrupt in case of invalid SIAR */ + if (perf_event_account_interrupt(event)) + power_pmu_stop(event, 0); } }
From: Toke Høiland-Jørgensen toke@redhat.com
[ Upstream commit 1e891e513e16c145cc9b45b1fdb8bf4a4f2f9557 ]
The error message emitted by bpf_object__init_user_btf_maps() was using the wrong section ID.
Signed-off-by: Toke Høiland-Jørgensen toke@redhat.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Yonghong Song yhs@fb.com Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/lib/bpf/libbpf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 3e53bfcba2b1a..ae19778220574 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -2151,7 +2151,7 @@ static int bpf_object__init_user_btf_maps(struct bpf_object *obj, bool strict, data = elf_getdata(scn, NULL); if (!scn || !data) { pr_warn("failed to get Elf_Data from map section %d (%s)\n", - obj->efile.maps_shndx, MAPS_ELF_SEC); + obj->efile.btf_maps_shndx, MAPS_ELF_SEC); return -EINVAL; }
From: Yauheni Kaliuta yauheni.kaliuta@redhat.com
[ Upstream commit c210773d6c6f595f5922d56b7391fe343bc7310e ]
The error path in libbpf.c:load_program() has calls to pr_warn() which ends up for global_funcs tests to test_global_funcs.c:libbpf_debug_print().
For the tests with no struct test_def::err_str initialized with a string, it causes call of strstr() with NULL as the second argument and it segfaults.
Fix it by calling strstr() only for non-NULL err_str.
Signed-off-by: Yauheni Kaliuta yauheni.kaliuta@redhat.com Signed-off-by: Alexei Starovoitov ast@kernel.org Acked-by: Yonghong Song yhs@fb.com Link: https://lore.kernel.org/bpf/20200820115843.39454-1-yauheni.kaliuta@redhat.co... Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/bpf/prog_tests/test_global_funcs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c index 25b068591e9a4..193002b14d7f6 100644 --- a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c +++ b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c @@ -19,7 +19,7 @@ static int libbpf_debug_print(enum libbpf_print_level level, log_buf = va_arg(args, char *); if (!log_buf) goto out; - if (strstr(log_buf, err_str) == 0) + if (err_str && strstr(log_buf, err_str) == 0) found = true; out: printf(format, log_buf);
From: Marc Zyngier maz@kernel.org
[ Upstream commit d49f7d7376d0c0daf8680984a37bd07581ac7d38 ]
Instead of dealing with erratum 1418040 on each entry and exit, let's move the handling to __switch_to() instead, which has several advantages:
- It can be applied when it matters (switching between 32 and 64 bit tasks). - It is written in C (yay!) - It can rely on static keys rather than alternatives
Signed-off-by: Marc Zyngier maz@kernel.org Tested-by: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org Reviewed-by: Stephen Boyd swboyd@chromium.org Acked-by: Will Deacon will@kernel.org Link: https://lore.kernel.org/r/20200731173824.107480-2-maz@kernel.org Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/process.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 56be4cbf771f6..a81c9ca17b871 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -500,6 +500,39 @@ static void entry_task_switch(struct task_struct *next) __this_cpu_write(__entry_task, next); }
+/* + * ARM erratum 1418040 handling, affecting the 32bit view of CNTVCT. + * Assuming the virtual counter is enabled at the beginning of times: + * + * - disable access when switching from a 64bit task to a 32bit task + * - enable access when switching from a 32bit task to a 64bit task + */ +static void erratum_1418040_thread_switch(struct task_struct *prev, + struct task_struct *next) +{ + bool prev32, next32; + u64 val; + + if (!(IS_ENABLED(CONFIG_ARM64_ERRATUM_1418040) && + cpus_have_const_cap(ARM64_WORKAROUND_1418040))) + return; + + prev32 = is_compat_thread(task_thread_info(prev)); + next32 = is_compat_thread(task_thread_info(next)); + + if (prev32 == next32) + return; + + val = read_sysreg(cntkctl_el1); + + if (!next32) + val |= ARCH_TIMER_USR_VCT_ACCESS_EN; + else + val &= ~ARCH_TIMER_USR_VCT_ACCESS_EN; + + write_sysreg(val, cntkctl_el1); +} + /* * Thread switching. */ @@ -515,6 +548,7 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev, entry_task_switch(next); uao_thread_switch(next); ssbs_thread_switch(next); + erratum_1418040_thread_switch(prev, next);
/* * Complete any pending TLB or cache maintenance on this CPU in case
From: Marc Zyngier maz@kernel.org
[ Upstream commit bf87bb0881d0f59181fe3bbcf29c609f36483ff8 ]
As we can now switch from a system that isn't affected by 1418040 to a system that globally is affected, let's allow affected CPUs to come in at a later time.
Signed-off-by: Marc Zyngier maz@kernel.org Tested-by: Sai Prakash Ranjan saiprakash.ranjan@codeaurora.org Reviewed-by: Stephen Boyd swboyd@chromium.org Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com Acked-by: Will Deacon will@kernel.org Link: https://lore.kernel.org/r/20200731173824.107480-3-maz@kernel.org Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/cpu_errata.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index f9387c1252325..5e1686ffae0e9 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -906,6 +906,8 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .desc = "ARM erratum 1418040", .capability = ARM64_WORKAROUND_1418040, ERRATA_MIDR_RANGE_LIST(erratum_1418040_list), + .type = (ARM64_CPUCAP_SCOPE_LOCAL_CPU | + ARM64_CPUCAP_PERMITTED_FOR_LATE_CPU), }, #endif #ifdef CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT_VHE
linux-stable-mirror@lists.linaro.org
-
Alex Deucher -
Sasha Levin