From: Basavaraj Natikar Basavaraj.Natikar@amd.com
[ Upstream commit 2ece0930ac5662bccce0ba4c59b84c98d2437200 ]
Add additional supported PCI IDs for latest AMD NAVI GPU card which has an integrated Type-C controller and designware I2C with PCI interface.
Signed-off-by: Basavaraj Natikar Basavaraj.Natikar@amd.com Tested-by: Sanath S Sanath.S@amd.com Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Jarkko Nikula jarkko.nikula@linux.intel.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-designware-pcidrv.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index 5b45941bcbdd..de8dd3e3333e 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -398,6 +398,8 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(ATI, 0x73a4), navi_amd }, { PCI_VDEVICE(ATI, 0x73e4), navi_amd }, { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, + { PCI_VDEVICE(ATI, 0x7444), navi_amd }, + { PCI_VDEVICE(ATI, 0x7464), navi_amd }, { 0,} }; MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
From: Stefan Wahren stefan.wahren@i2se.com
[ Upstream commit 78a4471fa1a76a8bef4919105de67660a89a1e9b ]
During boot of I2SE Duckbill the kernel log contains a confusing error:
Failed to request dma
This is caused by i2c-mxs tries to request a not yet available DMA channel (-EPROBE_DEFER). So suppress this message by using dev_err_probe().
Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Reviewed-by: Fabio Estevam festevam@gmail.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-mxs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 68f67d084c63..b353732f593b 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -826,8 +826,8 @@ static int mxs_i2c_probe(struct platform_device *pdev) /* Setup the DMA */ i2c->dmach = dma_request_chan(dev, "rx-tx"); if (IS_ERR(i2c->dmach)) { - dev_err(dev, "Failed to request dma\n"); - return PTR_ERR(i2c->dmach); + return dev_err_probe(dev, PTR_ERR(i2c->dmach), + "Failed to request dma\n"); }
platform_set_drvdata(pdev, i2c);
From: Maurizio Lombardi mlombard@redhat.com
[ Upstream commit 84ed64b1a7a7fcd507598dee7708c1f225123711 ]
Calling spin_lock_irqsave() does not disable the interrupts on realtime kernels, remove the warning and replace assert_spin_locked() with lockdep_assert_held().
Signed-off-by: Maurizio Lombardi mlombard@redhat.com Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_tmr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index bac111456fa1..2b95b4550a63 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -73,8 +73,8 @@ static bool __target_check_io_state(struct se_cmd *se_cmd, { struct se_session *sess = se_cmd->se_sess;
- assert_spin_locked(&sess->sess_cmd_lock); - WARN_ON_ONCE(!irqs_disabled()); + lockdep_assert_held(&sess->sess_cmd_lock); + /* * If command already reached CMD_T_COMPLETE state within * target_complete_cmd() or CMD_T_FABRIC_STOP due to shutdown,
From: Kan Liang kan.liang@linux.intel.com
[ Upstream commit 6795e558e9cc6123c24e2100a2ebe88e58a792bc ]
From core PMU's perspective, Emerald Rapids is the same as the Sapphire Rapids. The only difference is the event list, which will be supported in the perf tool later.
Signed-off-by: Kan Liang kan.liang@linux.intel.com Signed-off-by: Ingo Molnar mingo@kernel.org Link: https://lore.kernel.org/r/20230106160449.3566477-1-kan.liang@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/events/intel/core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index f36fda2672e0..b70e1522a27a 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -6109,6 +6109,7 @@ __init int intel_pmu_init(void) break;
case INTEL_FAM6_SAPPHIRERAPIDS_X: + case INTEL_FAM6_EMERALDRAPIDS_X: pmem = true; x86_pmu.late_ack = true; memcpy(hw_cache_event_ids, spr_hw_cache_event_ids, sizeof(hw_cache_event_ids));
From: Mike Christie michael.christie@oracle.com
[ Upstream commit 6f1d64b13097e85abda0f91b5638000afc5f9a06 ]
Bug report and analysis from Ding Hui.
During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this:
[ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_sendmsg+0xe0/0x170 [ 276.974583] __sys_sendmsg+0xc8/0x170 [ 276.974891] do_syscall_64+0x38/0x90 [ 276.975216] entry_SYSCALL_64_after_hwframe+0x63/0xcd
We can easily reproduce by two tasks: 1. while :; do iscsiadm -m node --login; iscsiadm -m node --logout; done 2. while :; do cat \ /sys/devices/platform/host*/iscsi_host/host*/ipaddress; done
iscsid | cat --------------------------------+--------------------------------------- |- iscsi_sw_tcp_session_destroy | |- iscsi_session_teardown | |- device_release | |- iscsi_session_release ||- dev_attr_show |- kfree | |- show_host_param_ | ISCSI_HOST_PARAM_IPADDRESS | |- iscsi_sw_tcp_host_get_param | |- r/w tcp_sw_host->session (UAF) |- iscsi_host_remove | |- iscsi_host_free |
Fix the above bug by splitting the session removal into 2 parts:
1. removal from iSCSI class which includes sysfs and removal from host tracking.
2. freeing of session.
During iscsi_tcp host and session removal we can remove the session from sysfs then remove the host from sysfs. At this point we know userspace is not accessing the kernel via sysfs so we can free the session and host.
Link: https://lore.kernel.org/r/20230117193937.21244-2-michael.christie@oracle.com Signed-off-by: Mike Christie michael.christie@oracle.com Reviewed-by: Lee Duncan lduncan@suse.com Acked-by: Ding Hui dinghui@sangfor.com.cn Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/iscsi_tcp.c | 11 +++++++++-- drivers/scsi/libiscsi.c | 38 +++++++++++++++++++++++++++++++------- include/scsi/libiscsi.h | 2 ++ 3 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 4d2f33087806..5c19e75c0e2f 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -982,10 +982,17 @@ static void iscsi_sw_tcp_session_destroy(struct iscsi_cls_session *cls_session) if (WARN_ON_ONCE(session->leadconn)) return;
+ iscsi_session_remove(cls_session); + /* + * Our get_host_param needs to access the session, so remove the + * host from sysfs before freeing the session to make sure userspace + * is no longer accessing the callout. + */ + iscsi_host_remove(shost, false); + iscsi_tcp_r2tpool_free(cls_session->dd_data); - iscsi_session_teardown(cls_session);
- iscsi_host_remove(shost, false); + iscsi_session_free(cls_session); iscsi_host_free(shost); }
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 73d235540b98..d422e8fd7137 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -3024,17 +3024,32 @@ iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost, } EXPORT_SYMBOL_GPL(iscsi_session_setup);
-/** - * iscsi_session_teardown - destroy session, host, and cls_session - * @cls_session: iscsi session +/* + * issi_session_remove - Remove session from iSCSI class. */ -void iscsi_session_teardown(struct iscsi_cls_session *cls_session) +void iscsi_session_remove(struct iscsi_cls_session *cls_session) { struct iscsi_session *session = cls_session->dd_data; - struct module *owner = cls_session->transport->owner; struct Scsi_Host *shost = session->host;
iscsi_remove_session(cls_session); + /* + * host removal only has to wait for its children to be removed from + * sysfs, and iscsi_tcp needs to do iscsi_host_remove before freeing + * the session, so drop the session count here. + */ + iscsi_host_dec_session_cnt(shost); +} +EXPORT_SYMBOL_GPL(iscsi_session_remove); + +/** + * iscsi_session_free - Free iscsi session and it's resources + * @cls_session: iscsi session + */ +void iscsi_session_free(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *session = cls_session->dd_data; + struct module *owner = cls_session->transport->owner;
iscsi_pool_free(&session->cmdpool); kfree(session->password); @@ -3052,10 +3067,19 @@ void iscsi_session_teardown(struct iscsi_cls_session *cls_session) kfree(session->discovery_parent_type);
iscsi_free_session(cls_session); - - iscsi_host_dec_session_cnt(shost); module_put(owner); } +EXPORT_SYMBOL_GPL(iscsi_session_free); + +/** + * iscsi_session_teardown - destroy session and cls_session + * @cls_session: iscsi session + */ +void iscsi_session_teardown(struct iscsi_cls_session *cls_session) +{ + iscsi_session_remove(cls_session); + iscsi_session_free(cls_session); +} EXPORT_SYMBOL_GPL(iscsi_session_teardown);
/** diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h index 5cf84228b51d..c7ee5279e7fc 100644 --- a/include/scsi/libiscsi.h +++ b/include/scsi/libiscsi.h @@ -414,6 +414,8 @@ extern int iscsi_host_get_max_scsi_cmds(struct Scsi_Host *shost, extern struct iscsi_cls_session * iscsi_session_setup(struct iscsi_transport *, struct Scsi_Host *shost, uint16_t, int, int, uint32_t, unsigned int); +void iscsi_session_remove(struct iscsi_cls_session *cls_session); +void iscsi_session_free(struct iscsi_cls_session *cls_session); extern void iscsi_session_teardown(struct iscsi_cls_session *); extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *); extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
From: Mike Christie michael.christie@oracle.com
[ Upstream commit f484a794e4ee2a9ce61f52a78e810ac45f3fe3b3 ]
If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails, userspace could be accessing the host's ipaddress attr. If we then free the session via iscsi_session_teardown() while userspace is still accessing the session we will hit a use after free bug.
Set the tcp_sw_host->session after we have completed session creation and can no longer fail.
Link: https://lore.kernel.org/r/20230117193937.21244-3-michael.christie@oracle.com Signed-off-by: Mike Christie michael.christie@oracle.com Reviewed-by: Lee Duncan lduncan@suse.com Acked-by: Ding Hui dinghui@sangfor.com.cn Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/iscsi_tcp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index 5c19e75c0e2f..594336004190 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -848,7 +848,7 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param, char *buf) { struct iscsi_sw_tcp_host *tcp_sw_host = iscsi_host_priv(shost); - struct iscsi_session *session = tcp_sw_host->session; + struct iscsi_session *session; struct iscsi_conn *conn; struct iscsi_tcp_conn *tcp_conn; struct iscsi_sw_tcp_conn *tcp_sw_conn; @@ -858,6 +858,7 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
switch (param) { case ISCSI_HOST_PARAM_IPADDRESS: + session = tcp_sw_host->session; if (!session) return -ENOTCONN;
@@ -958,11 +959,13 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, if (!cls_session) goto remove_host; session = cls_session->dd_data; - tcp_sw_host = iscsi_host_priv(shost); - tcp_sw_host->session = session;
if (iscsi_tcp_r2tpool_alloc(session)) goto remove_session; + + /* We are now fully setup so expose the session to sysfs. */ + tcp_sw_host = iscsi_host_priv(shost); + tcp_sw_host->session = session; return cls_session;
remove_session:
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 0582d984793d30442da88fe458674502bad1ad29 ]
Fix multiple W=1 kernel-doc warnings in i2c-rk3x.c:
drivers/i2c/busses/i2c-rk3x.c:83: warning: missing initial short description on line: * struct i2c_spec_values: drivers/i2c/busses/i2c-rk3x.c:139: warning: missing initial short description on line: * struct rk3x_i2c_calced_timings: drivers/i2c/busses/i2c-rk3x.c:162: warning: missing initial short description on line: * struct rk3x_i2c_soc_data: drivers/i2c/busses/i2c-rk3x.c:242: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a START condition, which triggers a REG_INT_START interrupt. drivers/i2c/busses/i2c-rk3x.c:261: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. drivers/i2c/busses/i2c-rk3x.c:304: warning: expecting prototype for Setup a read according to i2c(). Prototype was for rk3x_i2c_prepare_read() instead drivers/i2c/busses/i2c-rk3x.c:335: warning: expecting prototype for Fill the transmit buffer with data from i2c(). Prototype was for rk3x_i2c_fill_transmit_buf() instead drivers/i2c/busses/i2c-rk3x.c:535: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Get timing values of I2C specification drivers/i2c/busses/i2c-rk3x.c:552: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate divider values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:713: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Calculate timing values for desired SCL frequency drivers/i2c/busses/i2c-rk3x.c:963: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Setup I2C registers for an I2C operation specified by msgs, num.
Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-rk3x.c | 44 +++++++++++++++++------------------ 1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 02ddb237f69a..13c14eb175e9 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -80,7 +80,7 @@ enum { #define DEFAULT_SCL_RATE (100 * 1000) /* Hz */
/** - * struct i2c_spec_values: + * struct i2c_spec_values - I2C specification values for various modes * @min_hold_start_ns: min hold time (repeated) START condition * @min_low_ns: min LOW period of the SCL clock * @min_high_ns: min HIGH period of the SCL cloc @@ -136,7 +136,7 @@ static const struct i2c_spec_values fast_mode_plus_spec = { };
/** - * struct rk3x_i2c_calced_timings: + * struct rk3x_i2c_calced_timings - calculated V1 timings * @div_low: Divider output for low * @div_high: Divider output for high * @tuning: Used to adjust setup/hold data time, @@ -159,7 +159,7 @@ enum rk3x_i2c_state { };
/** - * struct rk3x_i2c_soc_data: + * struct rk3x_i2c_soc_data - SOC-specific data * @grf_offset: offset inside the grf regmap for setting the i2c type * @calc_timings: Callback function for i2c timing information calculated */ @@ -239,7 +239,8 @@ static inline void rk3x_i2c_clean_ipd(struct rk3x_i2c *i2c) }
/** - * Generate a START condition, which triggers a REG_INT_START interrupt. + * rk3x_i2c_start - Generate a START condition, which triggers a REG_INT_START interrupt. + * @i2c: target controller data */ static void rk3x_i2c_start(struct rk3x_i2c *i2c) { @@ -258,8 +259,8 @@ static void rk3x_i2c_start(struct rk3x_i2c *i2c) }
/** - * Generate a STOP condition, which triggers a REG_INT_STOP interrupt. - * + * rk3x_i2c_stop - Generate a STOP condition, which triggers a REG_INT_STOP interrupt. + * @i2c: target controller data * @error: Error code to return in rk3x_i2c_xfer */ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) @@ -298,7 +299,8 @@ static void rk3x_i2c_stop(struct rk3x_i2c *i2c, int error) }
/** - * Setup a read according to i2c->msg + * rk3x_i2c_prepare_read - Setup a read according to i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) { @@ -329,7 +331,8 @@ static void rk3x_i2c_prepare_read(struct rk3x_i2c *i2c) }
/** - * Fill the transmit buffer with data from i2c->msg + * rk3x_i2c_fill_transmit_buf - Fill the transmit buffer with data from i2c->msg + * @i2c: target controller data */ static void rk3x_i2c_fill_transmit_buf(struct rk3x_i2c *i2c) { @@ -532,11 +535,10 @@ static irqreturn_t rk3x_i2c_irq(int irqno, void *dev_id) }
/** - * Get timing values of I2C specification - * + * rk3x_i2c_get_spec - Get timing values of I2C specification * @speed: Desired SCL frequency * - * Returns: Matched i2c spec values. + * Return: Matched i2c_spec_values. */ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) { @@ -549,13 +551,12 @@ static const struct i2c_spec_values *rk3x_i2c_get_spec(unsigned int speed) }
/** - * Calculate divider values for desired SCL frequency - * + * rk3x_i2c_v0_calc_timings - Calculate divider values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. */ @@ -710,13 +711,12 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate, }
/** - * Calculate timing values for desired SCL frequency - * + * rk3x_i2c_v1_calc_timings - Calculate timing values for desired SCL frequency * @clk_rate: I2C input clock rate * @t: Known I2C timing information * @t_calc: Caculated rk3x private timings that would be written into regs * - * Returns: 0 on success, -EINVAL if the goal SCL rate is too slow. In that case + * Return: %0 on success, -%EINVAL if the goal SCL rate is too slow. In that case * a best-effort divider value is returned in divs. If the target rate is * too high, we silently use the highest possible rate. * The following formulas are v1's method to calculate timings. @@ -960,14 +960,14 @@ static int rk3x_i2c_clk_notifier_cb(struct notifier_block *nb, unsigned long }
/** - * Setup I2C registers for an I2C operation specified by msgs, num. - * - * Must be called with i2c->lock held. - * + * rk3x_i2c_setup - Setup I2C registers for an I2C operation specified by msgs, num. + * @i2c: target controller data * @msgs: I2C msgs to process * @num: Number of msgs * - * returns: Number of I2C msgs processed or negative in case of error + * Must be called with i2c->lock held. + * + * Return: Number of I2C msgs processed or negative in case of error */ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) {
From: Koba Ko koba.ko@canonical.com
[ Upstream commit 83bcf3e52e9cfc727df33f1055ef0618c91719d0 ]
Some platforms send the speaker-mute key from EC. dell-wmi can't recognize it.
Add a new keymap for KEY_MUTE in type 0x0010 table.
Signed-off-by: Koba Ko koba.ko@canonical.com Link: https://lore.kernel.org/r/20230117123436.200440-1-koba.ko@canonical.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/dell/dell-wmi-base.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/platform/x86/dell/dell-wmi-base.c b/drivers/platform/x86/dell/dell-wmi-base.c index 089c125e18f7..b83d6fa6e39b 100644 --- a/drivers/platform/x86/dell/dell-wmi-base.c +++ b/drivers/platform/x86/dell/dell-wmi-base.c @@ -260,6 +260,9 @@ static const struct key_entry dell_wmi_keymap_type_0010[] = { { KE_KEY, 0x57, { KEY_BRIGHTNESSDOWN } }, { KE_KEY, 0x58, { KEY_BRIGHTNESSUP } },
+ /*Speaker Mute*/ + { KE_KEY, 0x109, { KEY_MUTE} }, + /* Mic mute */ { KE_KEY, 0x150, { KEY_MICMUTE } },
From: Kevin Kuriakose kevinmkuriakose@gmail.com
[ Upstream commit a410429a3b7e748a9db9f357e71e2e085a21c902 ]
To the best of my knowledge this is the same board as the B450M DS3H-CF, but with an added WiFi card. Name obtained using dmidecode, tested with force_load on v6.1.6
Signed-off-by: Kevin Kuriakose kevinmkuriakose@gmail.com Acked-by: Thomas Weißschuh linux@weissschuh.net Link: https://lore.kernel.org/r/20230119150925.31962-1-kevinmkuriakose@gmail.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/gigabyte-wmi.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c index ebd15c1d13ec..0163e912fafe 100644 --- a/drivers/platform/x86/gigabyte-wmi.c +++ b/drivers/platform/x86/gigabyte-wmi.c @@ -141,6 +141,7 @@ static u8 gigabyte_wmi_detect_sensor_usability(struct wmi_device *wdev)
static const struct dmi_system_id gigabyte_wmi_known_working_platforms[] = { DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B450M DS3H-CF"), + DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B450M DS3H WIFI-CF"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B450M S2H V2"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE AX V2"), DMI_EXACT_MATCH_GIGABYTE_BOARD_NAME("B550 AORUS ELITE"),
From: Hyunwoo Kim v4bel@theori.io
[ Upstream commit f2b0b5210f67c56a3bcdf92ff665fb285d6e0067 ]
When listen() and accept() are called on an x25 socket that connect() succeeds, accept() succeeds immediately. This is because x25_connect() queues the skb to sk->sk_receive_queue, and x25_accept() dequeues it.
This creates a child socket with the sk of the parent x25 socket, which can cause confusion.
Fix x25_listen() to return -EINVAL if the socket has already been successfully connect()ed to avoid this issue.
Signed-off-by: Hyunwoo Kim v4bel@theori.io Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/x25/af_x25.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c index 3a171828638b..07f6206e7cb4 100644 --- a/net/x25/af_x25.c +++ b/net/x25/af_x25.c @@ -482,6 +482,12 @@ static int x25_listen(struct socket *sock, int backlog) int rc = -EOPNOTSUPP;
lock_sock(sk); + if (sock->state != SS_UNCONNECTED) { + rc = -EINVAL; + release_sock(sk); + return rc; + } + if (sk->sk_state != TCP_LISTEN) { memset(&x25_sk(sk)->dest_addr, 0, X25_ADDR_LEN); sk->sk_max_ack_backlog = backlog;
From: Aurabindo Pillai aurabindo.pillai@amd.com
[ Upstream commit 4b069553246f993c4221e382d0d0ae34f5ba730e ]
[Why&How] Switching between certain modes that are freesync video modes and those are not freesync video modes result in timing not changing as seen by the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas Nicholas.Kazlauskas@amd.com Acked-by: Alan Liu HaoPing.Liu@amd.com Signed-off-by: Aurabindo Pillai aurabindo.pillai@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 409739ee5ba0..ee238a16572e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -10140,6 +10140,13 @@ static int dm_update_crtc_state(struct amdgpu_display_manager *dm, if (!dm_old_crtc_state->stream) goto skip_modeset;
+ /* Unset freesync video if it was active before */ + if (dm_old_crtc_state->freesync_config.state == VRR_STATE_ACTIVE_FIXED) { + dm_new_crtc_state->freesync_config.state = VRR_STATE_INACTIVE; + dm_new_crtc_state->freesync_config.fixed_refresh_in_uhz = 0; + } + + /* Now check if we should set freesync video mode */ if (amdgpu_freesync_vid_mode && dm_new_crtc_state->stream && is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state)) {
From: Dave Airlie airlied@redhat.com
[ Upstream commit f439a959dcfb6b39d6fd4b85ca1110a1d1de1587 ]
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie airlied@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index ee238a16572e..0f0dd9b0d84a 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -10769,6 +10769,8 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev, bool lock_and_validation_needed = false; struct dm_crtc_state *dm_old_crtc_state; #if defined(CONFIG_DRM_AMD_DC_DCN) + struct drm_dp_mst_topology_mgr *mgr; + struct drm_dp_mst_topology_state *mst_state; struct dsc_mst_fairness_vars vars[MAX_PIPES]; #endif
On Tue, Jan 31, 2023 at 10:01 AM Sasha Levin sashal@kernel.org wrote:
From: Dave Airlie airlied@redhat.com
[ Upstream commit f439a959dcfb6b39d6fd4b85ca1110a1d1de1587 ]
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie airlied@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
This patch is only applicable to kernel 6.1 and newer.
Alex
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index ee238a16572e..0f0dd9b0d84a 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -10769,6 +10769,8 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev, bool lock_and_validation_needed = false; struct dm_crtc_state *dm_old_crtc_state; #if defined(CONFIG_DRM_AMD_DC_DCN)
struct drm_dp_mst_topology_mgr *mgr;struct drm_dp_mst_topology_state *mst_state; struct dsc_mst_fairness_vars vars[MAX_PIPES];#endif
-- 2.39.0
On Tue, Jan 31, 2023 at 03:29:04PM -0500, Alex Deucher wrote:
On Tue, Jan 31, 2023 at 10:01 AM Sasha Levin sashal@kernel.org wrote:
From: Dave Airlie airlied@redhat.com
[ Upstream commit f439a959dcfb6b39d6fd4b85ca1110a1d1de1587 ]
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie airlied@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org
This patch is only applicable to kernel 6.1 and newer.
Ack, I'll drop it on older kernels, thanks!
linux-stable-mirror@lists.linaro.org
-
Alex Deucher -
Sasha Levin